Escolar Documentos
Profissional Documentos
Cultura Documentos
GENERAL FEATURES
FleetSync
PTT ID Digital ANI
Selective Call3
ACCESSORIES INCLUDED
Options
KNB-45L
KRA-27
KEP-2
KHS-23
Earphone Kit
(2.5mm plug)
TK-2302VK
Model
TK-2302VK
RECEIVER (Measurements made per TIA/EIA-603)
TK-3302UK
MIL 810C
Methods/Procedures
500.1/Procedure
501.1/Procedure
502.1/Procedure
503.1/Procedure
505.1/Procedure
506.1/Procedure
507.1/Procedure
509.1/Procedure
510.1/Procedure
514.2/Procedure
516.2/Procedure
I
I, II
I
I
I
I, II
I, II
I
I
VIII, X
I, II, V
MIL 810D
MIL 810E
MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures
500.2/Procedure
501.2/Procedure
502.2/Procedure
503.2/Procedure
505.2/Procedure
506.2/Procedure
507.2/Procedure
509.2/Procedure
510.2/Procedure
514.3/Procedure
516.3/Procedure
I, II
I, II
I, II
I
I
I, II
II, III
I
I
I
I, IV
TK-3302UK
Nylon Case
Frequency Range
Type 1
136-174 MHz
450-490 MHz
Number of Channels
16
Channel Spacing
Wide/Narrow
25 kHz/12.5 kHz
Operating Voltage
7.5V DC20%
Battery Life (5-5-90 during hi-power battery saver: OFF/ON)
with KNB-45L (2000mAh)
Approx. 12 hours / 18 hours
Operating Temperature Range
-22F ~ +140F (-30C ~ +60C)
Frequency Stability
2.5 ppm (-30C ~ +60C)
Antenna Impedance
50
Dimensions (W x H x D), Projections not included
with KNB-45L
2.13 x 4.8 x 1.33 (54 x 122 x 33.8 mm)
Weight (Net)
Radio Only
5.6oz (160g)
with KNB-45L
9.9oz (280g)
FCC ID
Type 1
ALH413500
ALH413600
Standard
KLH-126
Earbud In-line
PTT Headset
Specifications
Model
GENERAL
KHS-26
Single-Muff Headset
with In-line PTT
KWR-1
KHS-7A
KRA-26
Belt Clip
KHS-25
Single-Muff Headset
KBH-10
KHS-7
KRA-23
Behind-the-head
Headset with PTT
KRA-17
UHF Stubby Antenna
KMB-28
KHS-22
Compact Speaker
Microphone
KRA-22
KMC-21
KMB-25
KHS-9BL/BE
Speaker Microphone
KRA-16
D-Ring In-line
PTT Headset
KMC-45
KSC-35K
KHS-27
KHS-8BL/BE
500.3/Procedure I, II
501.3/Procedure I, II
502.3/Procedure I, II
503.3/Procedure I
505.3/Procedure I
506.3/Procedure I, II
507.3/Procedure II, III
509.3/Procedure I
510.3/Procedure I
514.4/Procedure I
516.4/Procedure I, IV
500.4/Procedure I, II
501.4/Procedure I, II
502.4/Procedure I, II
503.4/Procedure I, II
505.4/Procedure I
506.4/Procedure I, III
507.4
509.4
510.4/Procedure I, III
514.5/Procedure I
516.5/Procedure I, IV
IP54/55
*To meet IP54/55, the 2-pin connector cover has to be connected on the radio or the locking bracket has to be attached to the KMC-45 external speaker microphone.
JQA-QMA1205