Escolar Documentos
Profissional Documentos
Cultura Documentos
TrainingCourses:BARCRTLEVELI:QualityNDTServices
Home
About Us
NDT Services
Training Courses
Contact Us
Training Courses
BARC RT LEVEL-I
ASNT RT (SNT_TC_1A)
ASNT UT (SNT_TC_1A)
ASNT MT (SNT_TC_1A)
ASNT PT (SNT_TC_1A)
The details of the course are as follows:Total seats available for the course are 25 Nos.
Course duration
Venue
Minimum Experience&
Proof
Fees
Rs. 17,500/- + 14.5% Service Tax (Inclusive of Lunch, Snacks & Tea) Payment
to be made by Demand Draft in favor of Quality NDT Training Institute, Pune.
Contact Address
Company Address
Last Date
Application form (attached herewith) duly lled in along with fees should
reach to the Course Director 15 days before starting date of the course.
Accommodation
The Certi cate will be issued by Bhabha Atomic Research Centre, Mumbai.
Training Courses
http://qualityndt.org/barcrtlevel1.html
1/7
7/6/2016
TrainingCourses:BARCRTLEVELI:QualityNDTServices
This institute is an industry oriented training centre which recognizes the importance of the well trained
manpower in effective implementation of appropriate Non-Destructive Testing techniques. This institute caters
to the training requirements of engineers, supervisors and NDT operators.
Quality NDT Services conduct BARC level-I course for radiographer at our institute. Examination is conducted by
BARC and certi cation is provided by the same.We also provide Level-I and Level-II certi cation in RT, UT, PT
and MT as per SNT-TC-1A/EN473.
The faculty consists of well-quali ed and experienced personnel [ASNT Level-III, Radiological Safety Of cer,
BARC Scienti c of cers].
Faculty
The Institute has an air conditioned lecture hall having a seating capacity of 25 candidates. With audio-visual
displays and fully edged training workshop for popular methods of Non-Destructive Testing. NDT laboratory
for methods RT, UT, MT, PT & VT.
Well equipped dark room with manual processing system.Under ground radiography enclosure approved by
AERB.Suf cient equipment for RT, UT, PT & MT.
RT - GAMM RAY CAMERAS - AMERTEST-660, SPEC-2T, ROLI-1, ROLI-3 and X-ray machines
UT - Equipment of different makes EEC, Modsonic, also Digital Thickness meters.
MPT - Installed machine upto 1000A and portables units with prods, yokes etc. Various test samples with
simulated defects A library equipped relevant books, codes of reference specs etc.
RT Level I Responsibilities :
To carryout operation as per written procedure/instruction from Level II personnel. He shall be able to set up
the carryout the tests as per established and approved RT procedures, classify, report the results and to follow
safety norms. He shall not be responsible for the choice of the test technique nor for assessment of the test
results.
2/7
7/6/2016
TrainingCourses:BARCRTLEVELI:QualityNDTServices
RT Level II Responsibilities :
A certi ed RT Level 2 personnel is quali ed to :
Select proper test technique, equipment, lms, IQI and other test parameters
Set up equipment
Perform testing, Manually process lm for high contrast and resolution and interpret the results as per
applicable standards
Have knowledge of the scope and limitations of RT
Be familiar with production processes of the test material and knowledge of type and location of
expected defects
Describe the operational steps in the radiography test method and understand the importance of each
step
To develop RT technique for testing a particular job
Prepare test report for i. Accept ii. Reject iii. Rework
Prepare written instruction for Level I
Guide and check test results of Level I operators
Responsible for care and maintenance of the NDT/RT equipment
3/7
7/6/2016
TrainingCourses:BARCRTLEVELI:QualityNDTServices
Same as level-I + Interpretation, evaluation of Radiographs, recording of test results and preparation of test
reports.
UT Level I Responsibilities :
To carryout operation as per written procedure/instruction from Level II personnel. He shall be able to set up
the equipment, calibrate and carryout the tests, classify and report the results. He shall not be responsible for
the choice of the test technique nor for assessment of the test results.
4/7
7/6/2016
TrainingCourses:BARCRTLEVELI:QualityNDTServices
UT Level II Responsibilities :
A certi ed UT Level II personnel is quali ed to :
Select proper test technique, equipment and probes
Set up and calibrate the equipment
Perform testing and interpret the results as per applicable standards
Have knowledge of the scope and limitations of UT
Be familiar with production processes of the test material and knowledge of type and location of
expected defects
To develop UT technique for testing a particular job
Prepare test report for i. Accept ii. Reject iii. Rework
Prepare written instruction for Level I
Guide and check test results of Level I operators
Responsible for care and maintenance of the NDT/UT equipment
MT Level I Responsibilities :
http://qualityndt.org/barcrtlevel1.html
5/7
7/6/2016
TrainingCourses:BARCRTLEVELI:QualityNDTServices
To carry out operations as per written procedure/instruction from level II personnel. He shall be able to set up
equipment, calibrate and carry out tests, classify and report the results. He shall not be responsible for the
choice of test technique nor for assessment of the test results.
uorescent
MT Level II Responsibilities :
A certi ed MT Level II personnel is quali ed to :
To select proper test technique and equipment as per established procedure
To calibrate, set and carry out test or supervise testing by level I operator
Prepare test report for acceptance/rejection as per standard
Have knowledge of merits and limitations of MT and other common NDT methods
Prepare written procedure for level I operator
Responsible for care and maintenance of testing machines and accessories
6/7
7/6/2016
TrainingCourses:BARCRTLEVELI:QualityNDTServices
PT Level I Responsibilities :
To carry out operations according to
http://qualityndt.org/barcrtlevel1.html
7/7