Você está na página 1de 2

-06-

Top of Tank Line, SS

Type: 25270/28

Design meets the requirements of PED 97/23/EC and harmonized standards


Purchase Order Data
Company:
Purchase order No.:
Quantity:

Project:
Tag No.:

Operating Conditions
Fluid:
Density:
0.55g/cm3
g/cm3:
Viscosity:
600cSt
cSt:
max. 28bar(g)@20C *1)
bar(g):
Operation pressure:
"
Design pressure:
bar(g):
-40C ... +400C *1)
Operation temperature:
C:
"
Design temperature:
C:
Gaskets for top service connection: NBR / PTFE / Graphite
Process Connections
Process flange EN1092-1:2013
- EN1092-1/01 A/DN50/PN40/316L
- Type A : with flat face

Special flange execution

Process flange ASME B16.5:2013


- ANSI/ASME B16.5 / 2'' class 300 RFSF
- RF SF: with raised face
Dimensions
Tank depth L
Length L1 (M + 245 mm)
C1
C2
Measuring length M (L - 200 mm)
Length L4 (M + 100 mm)
Connection pipe length L5 (L - 140 mm)
Immersion depth E
Design and Materials
Float chamber:

Connection pipe length L5

Special

0
95
150
0
0
0
-

0
0
0
-

316&316L

Float:

Magnet holder:

Indication Rail
PC, IP65 (<150C)
PC, IP68, inert gas (<150C)
Al/PC, IP54 (<250C)
Al/Glass, IP54 (<400C)
316L, IP67 (<250C)
316L, IP67 (<400C)
Special execution
Float Extension bottom / top
C1:
C2:
Standard
95
150

Standard

Flaps:
Flaps:
Flaps:
Flaps:
Flaps:
Flaps:
Flaps:

red-silver
red-silver
red-silver
black-silver
red-silver
black-silver

No.:
No.:
No.:
No.:
No.:
No.:
No.:

34837
41008
34560
37100
42403
42404

Standard

Accessories (refer to installation instructions 20010501)


Fixation bracket No. 26936:
Dim. "A" [mm]:
Magnetic switch:
Quantity:
Type:
Transmitter:
Resolution [mm]:
Type:
Electrical measuring length Mel [mm]:
Converter:
Type:
Additional accessories:

Test Reports and Certificates


EN10204:2004-3.1 Material certificate for float chamber
Special Executions &
Additional Notes
Density g/cm3

Notes
*1)

Refer to pressure-temperature rating! Lowest rating of any connecting flange or fitting and float chamber sets the limitation.
The test pressure PT is specified acc. to WEKA specifications AW 2.1.2.

All mentioned dimensions are in mm and are valid only for ToT standard executions.
WEKA AG - Schrlistrasse 8 - CH-8344 Bretswil
Subject to change without notice
Phone +41 43 833 43 43 - Fax +41 43 833 43 49
revised 06.11.2013/ Wb
info@weka-ag.ch - www.weka-ag.ch
DS_VLI_Top_of_Tank_Line_20150716_E

-07-

Pressure-temperature rating for Top of Tank Line SS 25270/28


Max. 28bar(g)@20C, up to max. 500C for ToT float chambers in SS EN 1.4401, 1.4436 & 1.4404, 1.4435 resp. ANSI 316&316L
40.0
38.5

ToT Type 25270/28


35.7

35.0

Additional range of float chamber


without float and magnet holder

33.4

31.6
30.3
29.4

Pressure (barg)

30.0

28.8

28.2

EN 1092-1:2013 PN6 flange


double certified 1.4401/1.4436 & 1.4404/1.4435
Material group 14E0

25.0

EN 1092-1:2013 PN16 flange


double certified 1.4401/1.4436 & 1.4404/1.4435
Material group 14E0

20.0

EN 1092-1:2013 PN40 flange


double certified 1.4401/1.4436 & 1.4404/1.4435
Material group 14E0
16.0

16.0

16.0

15.0

ASME B16.5:2013 class150 flange


double certified 316&316L
Material group 2.2 resp. 2A2

16.0
12.7

14.5

11.8

13.4

11.4

10.9

10.7

10.5

10.0

5.0

0.0
-200

6.0

-150

6.0

6.0

-100

-50

50

6.0

100

5.4

150

5.0

200

4.7

250

4.4

300

Operating range

Temperature of fluid (C)

DS_VLI_Top_of_Tank_Line_20150716_E
Subject to change without notice
revised 06.11.2013/ Wb

AlNiCo Magnet
NBR gasket
PTFE pure or spiral wound gasket 316
Graphite pure ore spiral wound gasket 316
PC indication rail
Al or SS standard indication rail
Al oder SS high temperature indication rail
SS screws and nuts in A2-70

4.2

350

ASME B16.5:2013 class300 flange


double certified 316&316L
Material group 2.2 resp. 2A2

3.9
4.1

400

4.0

450

500

Other flanges on request


Notes:
- EN1092-1:2013 flange PN10 and PN16 up to DN150
use identical interface dimensions
- EN1092-1:2013 flange PN25 and PN40 up to DN150
use identical interface dimensions
- Tolerated max. pressure @ specified temperature
for the ToT is given eithter by the
float chamber or by the process flange
--- Lower value sets the limitation! --WEKA AG - Schrlistrasse 8 - CH-8344 Bretswil
Phone +41 43 833 43 43 - Fax +41 43 833 43 49
info@weka-ag.ch - www.weka-ag.ch

Você também pode gostar