Escolar Documentos
Profissional Documentos
Cultura Documentos
Nonproprietary Names
BP: Ethylcellulose
PhEur: Ethylcellulose
USP-NF: Ethylcellulose
Synonyms
Aquacoat ECD; Aqualon; Ashacel; E462; Ethocel; ethylcellulosum;
Surelease.
Chemical Name and CAS Registry Number
Cellulose ethyl ether [9004-57-3]
4 Empirical Formula and Molecular Weight
Ethylcellulose is partially ethoxylated. Ethylcellulose with complete
ethoxyl substitution (DS = 3) is
C12H23O6(C12H22O5)nC12H23O5 where n can vary to provide a
wide variety of molecular weights. Ethylcellulose, an ethyl ether of
cellulose, is a long-chain polymer of b-anhydroglucose units joined
together by acetal linkages.
Functional Category
Coating agent; flavoring agent; tablet binder; tablet filler; viscosityincreasing
agent.
E
Applications in Pharmaceutical Formulation or Technology
Ethylcellulose is widely used in oral and topical pharmaceutical
formulations; see Table I.
The main use of ethylcellulose in oral formulations is as a
hydrophobic coating agent for tablets and granules.(18) Ethylcellulose
coatings are used to modify the release of a drug,(710) to mask
an unpleasant taste, or to improve the stability of a formulation; for
example, where granules are coated with ethylcellulose to inhibit
oxidation. Modified-release tablet formulations may also be
produced using ethylcellulose as a matrix former.(1114)
Ethylcellulose, dissolved in an organic solvent or solvent
mixture, can be used on its own to produce water-insoluble films.
Higher-viscosity ethylcellulose grades tend to produce stronger and
more durable films. Ethylcellulose films may be modified to alter
their solubility,(15) by the addition of hypromellose(16) or a
plasticizer;(1719) see Section 18. An aqueous polymer dispersion
(or latex) of ethylcellulose such as Aquacoat ECD (FMC
Biopolymer) or Surelease (Colorcon) may also be used to produce
ethylcellulose films without the need for organic solvents.
Drug release through ethylcellulose-coated dosage forms can be
controlled by diffusion through the film coating. This can be a slow
process unless a large surface area (e.g. pellets or granules compared
with tablets) is utilized. In those instances, aqueous ethylcellulose
dispersions are generally used to coat granules or pellets.
Ethylcellulose-coated beads and granules have also demonstrated
the ability to absorb pressure and hence protect the coating from
fracture during compression.(19)
High-viscosity grades of ethylcellulose are used in drug microencapsulation. (
10,2022)
Incompatibilities
Incompatible with paraffin wax and microcrystalline wax.
Method of Manufacture
Ethylcellulose is prepared by treating purified cellulose (sourced
from chemical-grade cotton linters and wood pulp) with an alkaline
solution, followed by ethylation of the alkali cellulose with
chloroethane as shown below, where R represents the cellulose
radical:
RONa C2H5Cl ! ROC2H5 NaCl
The manner in which the ethyl group is added to cellulose can be
described by the degree of substitution (DS). The DS designates the
average number of hydroxyl positions on the anhydroglucose unit
that have been reacted with ethyl chloride. Since each anhydroglucose
unit of the cellulose molecule has three hydroxyl groups, the
maximum value for DS is three.
Safety
Ethylcellulose is widely used in oral and topical pharmaceutical
formulations. It is also used in food products. Ethylcellulose is not
metabolized following oral consumption and is therefore a
noncalorific substance. Because ethylcellulose is not metabolized it
is not recommended for parenteral products; parenteral use may be
harmful to the kidneys.
Ethylcellulose is generally regarded as a nontoxic, nonallergenic,
and nonirritating material.
As ethylcellulose is not considered to be a health hazard, the
WHO has not specified an acceptable daily intake.(29) The highest
reported level used in an oral product is 308.8 mg in an oral
sustained release tablet.(30)
Handling Precautions
It is important to prevent fine dust clouds of ethylcellulose from
reaching potentially explosive levels in the air. Ethylcellulose is
combustible. Ethylcellulose powder may be an irritant to the eyes
and eye protection should be worn.
16 Regulatory Status
GRAS listed. Accepted for use as a food additive in Europe.
Included in the FDA Inactive Ingredients Database (oral capsules,
suspensions and tablets; topical emulsions and vaginal preparations).
Included in nonparenteral medicines licensed in Europe.
Included in the Canadian List of Acceptable Non-medicinal
Ingredients.
Related Substances
Hydroxyethyl cellulose; hydroxyethylmethyl cellulose; methylcellulose.
Comments
Ethylcellulose is one of the materials that have been selected for
harmonization by the Pharmacopeial Discussion Group. For further
information see the General Information Chapter <1196> in the
USP32NF27, the General Chapter 5.8 in PhEur 6.0, along with the
State of Work document on the PhEur EDQM website, and also
the General Information Chapter 8 in the JP XV.
Ethylcellulose is compatible with the following plasticizers:
dibutyl phthalate; diethyl phthalate; dibutyl sebacate; triethyl
citrate; tributyl citrate; acetylated monoglyceride; acetyl tributyl
citrate; triacetin; dimethyl phthalate; benzyl benzoate; butyl and
glycol esters of fatty acids; refined mineral oils; oleic acid; stearic
acid; ethyl alcohol; stearyl alcohol; castor oil; corn oil; and
camphor.
Ethylcellulose has also been used as a backing membrane on
mucoadhesive patches intended for buccal administration. The
membrane had high tensile strength, and provided excellent
unidirectional drug flow.(32) Studies have also suggested ethylcellulose