Escolar Documentos
Profissional Documentos
Cultura Documentos
EXERCISES
PAGE NO
Group No.:
_____________
Date of Performance:
Rating:
_____________
_____________
Instructors Signature:
_____________
_____________
Date Submitted:
EXERCISE NO. 01
SHIP YARD PRACTICE
OBJECTIVE: Upon completion of this chapter, the student shall be able to state the
various stages in shipbuilding from initial drawing to launching the ship.
4. What are the mandatory International Rules and Conventions that shipbuilder
should follow?
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
5. Define the following:
(a) Strake
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
(b) Longitudinal Framing System
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
(c) Transverse Framing System
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
(d) Bulkhead
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
(e) Keel
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
Group No.:
_____________
Date of Performance:
Rating:
_____________
_____________
Instructors Signature:
_____________
_____________
Date Submitted:
EXERCISE NO. 02
SHIP YARD PRACTICE
OBJECTIVE: Upon completion of this chapter, the student shall be able to state to
define the terms used on ship dimension and tonnage measurement and illustrate
the loadline marking.
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
(e) Grain and Bale capacity
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
(f) Displacement
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
(g) Deadweight
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
(h) Freeboard Draft
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
(i) Gross tonnage
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
(j) Nett tonnage
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
4.Explain what is ship tonnage.
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Group No.:
_____________
Date of Performance:
Rating:
_____________
_____________
Instructors Signature:
_____________
_____________
Date Submitted:
EXERCISE NO. 03
STRUCTURAL PARTS OF A SHIP
OBJECTIVE: Upon completion of this chapter, the student shall be able to identify the
principal and different structural parts and members of the ship and explain their
individual functions.
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
2. State what the functional of the following are:
(a) Watertight bulkhead
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
(b) Frames
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
(c) Bilge keel
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
(d) Stern Tubes
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
(e) Bulwarks
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
(f) Deep tanks
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
3. Describe what a bulbous bow is.
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
4. In what structural of the ship is the keel located.
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
5. Define Shell Expansion Plan.
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Group No.:
_____________
Date of Performance:
Rating:
_____________
_____________
Instructors Signature:
_____________
_____________
Date Submitted:
EXERCISE NO. 04
STRESS AND STRAINS IN SHIPS
OBJECTIVE: Upon completion of this chapter, the student shall be able to explain
what causes stress on ship.
EXERCISES:
1. Explain what causes stress on ship.
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
2. Define the following:
(a) Hogging and sagging
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
(b) Racking
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
(c) Tension
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
(d) Compression
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
(e) Panting
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
(f) Pounding
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
3. Enumerate the main types of stress.
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
4. When the vessel is pitching heavily, what motion is she experiencing?
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
Group No.:
_____________
Date of Performance:
Rating:
_____________
_____________
Instructors Signature:
_____________
_____________
Date Submitted:
EXERCISE NO. 05
UNDERSTANDING THE PRINCIPLES OF STABILITY
OBJECTIVE: Upon completion of this chapter, the student shall be able to acquire
knowledge in the principles involved on ships stability and is able to understand the
purpose and the importance of stress and stability in ship.
EXERCISES:
(c) Deadweight
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
(d) Draft
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________
2. Explain the principle of floatation.
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
3. Define center of gravity.
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
4. Define center buoyancy.
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_____________
Date of Performance:
_____________
Rating:
_____________
_____________
Instructors Signature:
_____________
Date Submitted:
EXERCISE NO. 06
DENSITY, DEADWEIGHT AND DRAFT
OBJECTIVE: Upon completion of this chapter, the student shall be able to explain
why tons per centimeter (TPC) varies with different draft and explain why draft
decrease when passing from fresh water to salt water.
EXERCISES:
1. Explain why draft decreases when passing from fresh water to salt water.
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
2. Explain why tons per centimeter (TPC) vary with different draft.
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
3. Define hydrometer.
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
4. State the law of floatation by Archimedes principle.
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
5. A ship floats at a draft of 7.50 m in water of density 1.005 t/m 3. If her freshwater allowance is 380 mm, what would be her draft on passing into salt
water?
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
6. Using the displacement curves (Fig.50) determine displacement
of 6.7m draft.
7.
Group No.:
_____________
Rating:
_____________
_____________
Instructors Signature:
_____________
Date of Performance:
Date Submitted:
_____________
EXERCISE NO. 07
LOSS OF INFACT BOUYANCY AND WATERTIGHT INTEGRITY
OBJECTIVE: Upon completion of this chapter, the student shall be able to explain the
action needed in the event of partial loss of intact buoyancy and watertight
integrity.
EXERCISES:
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
4. Find the permeability of cargo that has a relative density of 2.20
and stowage factor of 150.
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
Group No.:
_____________
Rating:
_____________
_____________
Instructors Signature:
_____________
Date of Performance:
Date Submitted:
_____________
EXERCISE NO. 08
LONGITUDINAL STABILITY
OBJECTIVE: Upon completion of this chapter, the student able defined the center of
floatation, Trim, Draft and able to perform calculations re4garding shifting of weight
and adding of weight at the center of floatation.
EXERCISES:
EXERCISES:
1. A ship meters long and her center of flotation is 2 meters abaft amidships.
She floats at drafts of 6.25 meters fore and 6.80 meters aft. Find the new
drafts if a weight is shifted aft so as to change the trim by 44 centimeters.
The center of flotation of 55 meters from fore and 50 meters from aft.
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
2. Find the change of trim of the new drafts in a ship of 165 meters length, when
a weight of 100 tones is shifted aft for a distance of 50 meters. The original
drafts were 7.80 meters fore and 7.76 meters aft. The center of flotation is
2.5 meters abaft amidships and the MCT 1cm is 110 tonne/meters.TPS 50
tons.
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Group No.:
_____________
Date of Performance:
Rating:
_____________
_____________
Instructors Signature:
_____________
EXERCISE NO. 09
Date Submitted:
_____________
OBJECTIVE: Upon completion of this chapter, the student shall be able to know how
to use the hydrostatic curves and Deadweight Scale.
EXERCISES:
b) MTC 1cm
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
c) TPC
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
d) Deadweight
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
3. Assuming that the hip is floating at a mean draft of 8.55 meters, find the
following information in the hydrostatic data (Fig 62)
a) Displacement
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
b) MTC
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
c) L. KM
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
d) T. KM
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
e) Center of Buoyancy
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
f) Center of Floatation
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
4. Find the righting levers (Fig.65) cross curves of stability (KN curves) when the
displacement is 25,000 tons and KG is 11.0 meters. Construct GZ curves on the
graph.