Escolar Documentos
Profissional Documentos
Cultura Documentos
RELATED POSTS
Home
Privacy Policy
LABELS
Batteries (1)
Computer Fundamentals (1)
Control Systems (8)
DC Machines (6)
Electrical Basics (4)
Electrical Circuits (1)
Electronic Devices (3)
Engineering Materials (1)
Grounding (1)
Induction Machines (6)
Measurement and Instrumentation (7)
Measurements (1)
Nuclear Power Plant (3)
Power Electronics (2)
Power System Stability (2)
Solar Power (1)
Substation (2)
Switchgear and Protection (3)
Synchronous Machines (2)
Thermal Power Plant (4)
Transformers (8)
Transmission and Distribution(1)
Template images by rajareddychadive. Powered by Blogger.
ADVERTISEMENT
2. Pipes carrying steam in thermal power plant are generally made of:
a) steel
b) cast iron
c) aluminium
d) cobalt
4. In a super heater:
a) pressure rises and temperature drops
b) temperature rises and pressure drops
c) temperature rises and pressure remains unchanged
d) pressure rises and temperature remains the same
7. As the size of the thermal power plant increases, the capital cost per kW of installed capacity:
a) increases
b) decreases
c) remains the same
d) may increase and decrease
10. Belt conveyors can be employed for transporting coal at inclination up to:
a) 75 deg
b) 60 deg
c) 30 deg
d) 15 deg
RELATED POSTS
Home
Privacy Policy
Batteries (1)
Computer Fundamentals (1)
Control Systems (8)
DC Machines (6)
Electrical Basics (4)
Electrical Circuits (1)
Electronic Devices (3)
Engineering Materials (1)
Grounding (1)
Induction Machines (6)
Measurement and Instrumentation (7)
Measurements (1)
Nuclear Power Plant (3)
Power Electronics (2)
Power System Stability (2)
Solar Power (1)
Substation (2)
Switchgear and Protection (3)
Synchronous Machines (2)
Thermal Power Plant (4)
Transformers (8)
Transmission and Distribution(1)
Template images by rajareddychadive. Powered by Blogger.
ADVERTISEMENT
3. Generally the speed of turbine generators employed in thermal power plants will be in the range of:
a) 750 rpm
b) 1000 rpm
c) 3000 rpm
d) 5000 rpm
6. Which of the following equipment is installed in steam power plant to reduce air pollution:
a) Air filer
b) HEPA filter
c) Electro static precipitator
d) All the above can be used
RELATED POSTS
Home
Privacy Policy
Batteries (1)
Computer Fundamentals (1)
ADVERTISEMENT
7. For the same drought required, the power of forced draught fan will be __ than the induced draught fan:
a) higher
b) lower
c) the same
d) may be more or less
RELATED POSTS
Home
Privacy Policy
Batteries (1)
Computer Fundamentals (1)
Control Systems (8)
DC Machines (6)
Electrical Basics (4)
Electrical Circuits (1)
Electronic Devices (3)
Engineering Materials (1)
Grounding (1)
Induction Machines (6)
Measurement and Instrumentation (7)
Measurements (1)
Nuclear Power Plant (3)
Power Electronics (2)
Power System Stability (2)
Solar Power (1)
Substation (2)
Switchgear and Protection (3)
Synchronous Machines (2)
Thermal Power Plant (4)
Transformers (8)
Transmission and Distribution(1)
Template images by rajareddychadive. Powered by Blogger.