Escolar Documentos
Profissional Documentos
Cultura Documentos
Units SI
Legend (Open)
General Information
Product Description
PCD 0140 is a low melt flow rate heterophasic copolymer with high impact resistance. This resin was
developed for steel pipe coating extrusion. PCD 0140 is highly protected against thermal ageing and
designed for continuous use at high temperature.
Applications:
Undercoating, solid thermal coating, foam thermal coating
Processing:
Extrusion
General
Material Status
Availability
Features
Uses
Processing Method
Commercial: Active
Europe
Good Thermal Aging
Resistance
High Impact Resistance
Automotive Applications
Extrusion
Latin America
Impact Copolymer
Low Flow
Coating Applications
Pipe Coatings
Pipe Extrusion
ASTM & ISO Properties 1
Physical
Nominal Value Unit
Test Method
Specific Gravity
0.905 g/cm
ASTM D792
Density
0.900 g/cm
ISO 1183
Melt Mass-Flow Rate (MFR) (230C/2.16 kg)
0.75 g/10 min ASTM D1238
Melt Mass-Flow Rate (MFR) (230C/2.16 kg)
0.75 g/10 min ISO 1133
Mechanical
Nominal Value Unit
Test Method
Tensile Strength (Yield, Compression Molded)
25.0 MPa
ASTM D638
Tensile Stress (Yield, Compression Molded)
25.0 MPa
ISO 527-2
Tensile Elongation (Yield, Compression Molded)
5.0 %
ASTM D638
Tensile Strain (Yield, Compression Molded)
7.0 %
ISO 527-2
Tensile Elongation (Break, Compression Molded)
> 400 %
ASTM D638
Tensile Strain (Break, Compression Molded)
> 400 %
ISO 527-2
Flexural Modulus - 1% Secant (Compression Molded)
1400 MPa
ASTM D790
Flexural Modulus (Compression Molded)
1050 MPa
ISO 178
Hardness
Nominal Value Unit
Test Method
Durometer Hardness (Shore D, 1 sec, Compression Molded)
66
ASTM D2240
Shore Hardness (Shore D, 1 sec, Compression Molded)
66
ISO 7619
Thermal
Nominal Value Unit
Test Method
Vicat Softening Temperature
146 C
ASTM D1525 2
Vicat Softening Temperature
Peak Melting Temperature
Melting Temperature
Oxidation Induction Time
220C
http://catalog.ides.com/Datasheet.aspx?I=79718&U=0&E=214194
146 C
163 C
163 C
ISO 306/A
ASTM D3418
ISO 11357-3
> 50 min
ISO 11357-6
1/2
15/10/2015
220C
Electrical
Volume Resistivity
Volume Resistivity
> 50
Nominal Value
1.0E+17
1.0E+17
min
Unit
ohmscm
ohmscm
ASTM D3895
Test Method
ASTM D257
IEC 60093
Notes
1
Loading 1 (10 N)
UL and the UL logo are trademarks of UL LLC 2015. All Rights Reserved.
http://catalog.ides.com/Datasheet.aspx?I=79718&U=0&E=214194
2/2