Applied Materials 655 West Reserve Drive Kalispell, Montana 59901
Quotation Number: 25300A
Revision: 6
Dear Derrick McLauchlin:
Thank you for the opportunity to propose our equipment for your application. Based on the application data provided, we are pleased to submit the following proposal for a Eaton Filtration/Ronningen-Petter DCF800 filter system for your consideration.
Process Conditions: Liquid: Water/Dilute Base/ Solvent
Considering these parameters, we are pleased to quote the following mechanically cleaned filter. The filter system offered has been selected based on maximum operating conditions.
Filtration System Offering:
Model DCF-800 Configuration: Materials of Construction: 316 stainless steel filter housing with glass bead blasted exterior finish. . Piping Connections and Valves: 2 L14AM7 sanitary fittings Inlet/Outlet on opposite sides. 1-1/2 L14AM7 purge connection Shaft Seal: Teflon adjustable shaft seal - 400F (204C). Actuator Type: 3-1/4" single actuator. Actuator Elastomer: Viton in Single Actuator Lid, Upper and Lower Element Elastomer: Teflon elastomer (FDA Approved) - 400F (204C).
Quotation Pricing Valid for 30 days from date prepared Created on 6/20/2016 7:45:00 AM 9151 Shaver Road Portage MI 49024 USA tel: 269-323-1313 fax: 269-323-2403 e-mail: info@ronningen-petter.com
Page 1 of 5
Cleaning Disc Material:
AMAT P/N: Teflon (FDA Approved) - 400F (204C). Cleaning disc is a spring loaded single wide edge design. MFG P/N: 8ZS00BTTT150001 Design Pressure: Std. 150 psi (11 bar) max., 30 psi (2 bar) min. Media: 2 12" (30.5 cm) long x 7" (18 cm) diameter 316 stainless steel. Surface area of screen is 264 in 2 (549 cm ). 50 micron (.002") Slotted Wedgewire Automation: No controls, continuous cleaning valve and purge valve removed
No enclosure. Service Requirements: Electric - 110/120 VAC. 3 Air 60 psi (4 bar) at 5 cfm (140 dm /m) intermittent use, must be clean, dry and non-lubricated; connection size NPT
Special: Floor Stand Removed.
Part Number: 8ZS00BTTT150001
Quantity 1 Price EA: US $11,400.00
Revision 6 Notes: 1. Inlet/outlet orientation changed to opposite side.
Delivery: FOB: Hidalgo, TX 7 Weeks
Once again, thank you for the opportunity to submit this proposal and if after review you have any questions or require additional information please contact us.
Best Regards,
Brianna Nagel bnagel@weci.com
C: Chris Porter, cporter@weci.com
Quotation Pricing Valid for 30 days from date prepared
Created on 6/20/2016 7:45:00 AM 9151 Shaver Road Portage MI 49024 USA tel: 269-323-1313 fax: 269-323-2403 e-mail: info@ronningen-petter.com