Escolar Documentos
Profissional Documentos
Cultura Documentos
MTI-2510
DDC MANAGER
(USB Type)
May.7. 2013
Contents
1.MTI-2510 Connection
2.Introduction
3.Software Installation
4.Software Description
5.System File (firmware) Upgrade Method
6.USB-I2c Protocol Definition
7.IR Transmitter
8.Adapter Board
9.Trouble Shooting
1.MTI-2510 connection
Target Display1
(Monitor/TV)
Target Display2
(Monitor/TV)
Host PC
HDMI-2
DVI-2
DSUB
2
DSUB
1
MTI-2510
-USB
Target Display3
(Monitor/TV)
Target Display4
(Monitor/TV)
Target Display5
(Monitor/TV)
USB
HDMI-1
DVI-1
Target Display6
(Monitor/TV)
2.Introduction
1.
Description
MTI-2510 is used for writing the EDID data and upgrade Display MCU firmware.
And this is used for USB to I2c communication and other many communication applications.
5. HDMI connector
Connect HDMI Port to your display machine. (Monitor or TV)
HDMI power pin is used for supply power 5V/100mA.
3.Software Installation
1.Installation Software
1)Insert the enclosed CD to your computer.
2)Autorun will execute the install.exe automatically
3)All file will be copied to your computer
(Windows System Drive (c:)\winDDU)
4)If computer request the MasTech USB driver, indicate the CD-ROM of your computer.
5)If the installation is completed, the execution file shortcut place at your computer desktop.
6)All DataBase file also located at winDDCU folder.
** In this folder, every day one file will be created and file name is Fyear_month_day.txt.
** This file will have Vendor ID, Product ID, Serial Number, CheckSum , Writer time and so on.
4.Software Description
1.EDID Writer Page
1)This page perform the Writer and Verify function to Display Equipment (TV/Monitor). Before writer and verify function
execution, you have to load EDID Data file(*.ddc).
2)It displays the each block of EDID in order that user may watch easily, and it will parse the all EDID data.
3)In order to modify and edit the EDID, Press button Ctrl+Q until the pink color parts text is displayed as Manager Edit.
4)In order to write each port, you have to select the port at yellow colors Drop Down menu.
5)In order to control power supply at each port, you can check or uncheck at Enable Power.
6)In order to read long data(256,512 byte), you have to change xxx byte length.
3.winISP Page
1)This page support the in-circuit-program for TV/Monitor flash MCU. You can program the MCU ROM code through
DSUB/DVI/HDMI port without taking off the cover.
2)Select Manufacture/Device Type/Communication Port/External Memory, and load hex or bin, and then press button
Auto Program.
1
11
10
To write and/or verify the EDID data, you have to select the port at below port window.
(DSUB1/DSUB2/DVI1/DVI2/HDMI1/HDMI2)
This selection support to power supply for power pin. (5V 100mA)
DSUB1(No.9) / DSUB2(No.9) / DVI1(No.14) / DVI2(No.14) / HDMI1(No.18) / HDMI2(No.18)
Indicate the EDID data length for read and write. If you read upper 128byte data, you have to select this data length.
Otherwise you cant read the correct data.
The button of read for reading from PC file (*.ddc). This button support the only *.ddc file format.
The button of save for saving the EDID data to PC file(*.ddc). You have to save the file as *.ddc file format.
The button of read for reading from the Monitor/TV. Before reading , you should set the file length at 3
The button of verify for comparing the EDID data between PC file and Monitor/TV set.
The button of read for reading from PC file (*.ddc). This button support the only *.ddc file format.
The button for disable the selected port at multi-port and close the file.
The button of verify for comparing the EDID data between PC file and Monitor/TV set.
2
3
4
5
6
7
8
9
10
11
12
The button of read for reading from PC file (*.bin/*.hex). Before press this button, you should set the 5,6,and 8 items.
The button for program and verify from PC read file to TV/Monitor Flash Memory.
The button for program from PC read file to TV/Monitor Flash Memory.
The button for verify and compare from PC read file to TV/Monitor Flash Memory.
The window for select the manufacture name from internal TV/Monitors Flash MCU or Scaler IC.
The window for select the device type name from internal TV/Monitors Flash MCU or Scaler IC
The window for select the communication port between MTI-2510 and TV/Monitor. (DSUB/DVI/HDMI)
In case of using the external Memory with Scaler IC, select the memory size and manufacture.
7.IR Transmitter
1.IR LED Connection Method
Host PC
HDMI-2
DSUB
2
DVI-2
MTI-2510
DSUB
1
(V1.2)
-USB
USB
HDMI-1
15pin DSUB
Male
IR LED
DVI-1
8. Adapter Board
1.Adapter Board Connection Method
1) This page support write and verify for all memory of I2C/SPI support. (EEPROM / Flash)
2) To use this function, you have to use additional adapter board. (Refer to this page explanation)
Host PC
DVI-1
DSUB
1
HDMI-1
MTI-2510
DVI-2
USB
-USB
DSUB DSUB
2
Male
HDMI-2
IC
Socket
-HDMI Cable
HDMI-1
2
3
4
5
6
7
8
9
11
10
The button of read for reading from PC file (*.bin/*.hex). Before press this button, you should set the 6,7 items.
The button for program and verify from PC read file to Memory.
The button for verify and compare from PC read file to Memory.
The window for select the manufacture name from Memory IC.
The window for select the device type name from Memory IC.
This window display the communication protocol between DDC Manager and AdapterBoard.
9.Trouble Shooting
1.When it appear below symptoms, follow through solution method
1) It can't read ID & Version Data!!! message appear.
2) You need to upgrade system file, because the system file is not present or currupted. message appear.
3) PC cant detect the USB.
4) PC detect the Unknown device.
5) In case of below Hardware Picture.
1
2
3.When application program run, if It can't read ID & Version Data!!! or You need to upgrade system file, because
the system file is not present or currupted. message appear with below picture, ...
(Old Version Hardware)