Você está na página 1de 10

Confidential Information of Huawei.

No
Spreading Without Permission

Confidential Information of Huawei. No


Spreading Without Permission

During CSFB based on PS handover, the UE is transferred from the E-UTRAN to the
UTRAN by performing a PS handover. It then initiates a CS service in the UTRAN.
The procedure is described as follows:
1. The UE sends the MME an NAS message Extended Service Request to
initiate a CS service.
2. The MME sends an S1-AP Request message to instruct the eNodeB to
initiate a CSFB procedure. If the MME supports the LAI-related feature, the
MME also delivers the LAI to the eNodeB.
3. The eNodeB determines whether to perform a blind handover based on the
UE capabilities, parameters settings, and algorithm policies.
4. The eNodeB initiates the preparation phase for a PS handover. If the
preparation is successful, the eNodeB instructs the UE to perform a handover.
5. After the handover, the UE may initiate a CS call establishment procedure
with an LAU or combined RAU/LAU procedure in the UTRAN.
6. The follow-up procedures are performed for the PS handover. These
procedures include data forwarding, path switching, and RAU. This step is
performed together with step 5.

Confidential Information of Huawei. No


Spreading Without Permission

The procedure is described as follows:


1. The MSC sends a Paging Request message from the CS domain to the MME
over the SGs interface. Then, either of the following occurs:
If the UE is in idle mode, the MME sends a Paging message to the
eNodeB. Then the eNodeB sends a Paging message over the Uu
interface to inform the UE of an incoming call from the CS domain.
If the UE is in active mode, the MME sends the UE an NAS message to
inform the UE of an incoming call from the CS domain.
2. The UE sends an Extended Service Request message containing a CS
Fallback Indicator after receiving the paging message from the CS domain.
3. The MME instructs the eNodeB over the S1 interface to perform CSFB.
4. The subsequent steps are similar to steps 3 through 6 in the procedure for
CSFB to UTRAN based on PS handover for mobile-originated calls. The only
difference is that the UE sends a Paging Response message from the UTRAN
cell.

Confidential Information of Huawei. No


Spreading Without Permission

Confidential Information of Huawei. No


Spreading Without Permission

The procedure is described as follows:


1. The UE sends the MME an NAS message Extended Service Request to
initiate a CS service.
2. The MME sends an S1-AP Request message to instruct the eNodeB to
initiate a CSFB procedure. If the MME supports the LAI-related feature, the
MME also delivers the LAI to the eNodeB.
3. The eNodeB determines whether to perform a blind handover based on the
UE capabilities, parameters settings, and algorithm policies.
4. The eNodeB sends an RRC Connection Release message to instruct the UE
to perform a redirection. The message contains information about a target
UTRAN frequency. Then, the eNodeB initiates an S1 UE context release
procedure.
5. The UE may initiate an LAU, a combined RAU/LAU, or both an RAU and an
LAU in the target cell.
6. The UE initiates a CS call establishment procedure in the target UTRAN cell.

Confidential Information of Huawei. No


Spreading Without Permission

Confidential Information of Huawei. No


Spreading Without Permission

During the flash CSFB procedure, the eNodeB receives a CS Fallback Indicator, and
then it sends an RRC Connection Release message to release the UE. The message
contains information about a target UTRAN frequency, as well as one or more
physical cell identities and their associated system information. In this way, the UE
can quickly access the target UTRAN without the need to perform the procedure
for acquiring system information of the target UTRAN cell. Then, the UE can
directly initiate a CS service in the UTRAN cell.

Confidential Information of Huawei. No


Spreading Without Permission

The procedure is described as follows:


1. The UE sends the MME an NAS message Extended Service Request to
initiate a CS service.
2. The MME sends an S1-AP Request message to instruct the eNodeB to
initiate a CSFB procedure. If the MME supports the LAI-related feature, the
MME also delivers the LAI to the eNodeB.
3. The eNodeB determines whether to perform a blind handover based on the
UE capabilities, parameters settings, and algorithm policies.
4. The eNodeB sends an RRC Connection Release message to instruct the UE
to perform a redirection. The message contains information about a target
UTRAN frequency, as well as one or more physical cell identities and their
associated system information. Then, the eNodeB initiates an S1 UE context
release procedure.
5. The UE may initiate an LAU, a combined RAU/LAU, or both an RAU and an
LAU in the target cell.
6. The UE initiates a CS call establishment procedure in the target UTRAN cell.

Confidential Information of Huawei. No


Spreading Without Permission

Confidential Information of Huawei. No


Spreading Without Permission

Você também pode gostar