Escolar Documentos
Profissional Documentos
Cultura Documentos
WITH SPEAKER
This one is strictly for fun!! The FK940 uses the principle of reduced
skin resistance due to elevated moisture levels. The FK940's two
conductive pads detect the drop in the player's figure tip resistance if
they are nervous or under pressure when telling a lie or withholding the
truth. An array of four LEDs indicates the relative "stress' that the
subject is under. Not to be taken seriously!!!
- Power Supply : 9VDC @ 32mA max.
- Sensitivity : Adjustable by potentiometer
- PCB Dimensions : 3.03"x1.75"x0.6"
- Recommended Housing : FB03
Before cutting or drilling into a wall use the FK946 to check if there is
any embedded live AC supply wires. This non-contact voltage detector
circuit will detect if there is an AC voltage present up to a distance
of 1cm. A bright red LED will blink or light up indicate the proximity
of live wires.
- Power Supply : 9VDC
@ 4mA(working), 1.2mA(standby)
- Detection Distance : 1 cm.
- Indicator : Red LED
- PCB Dimensions : 2.3" x 1.29" x 0.7"
(58.4mm x 32.8mm x 17.8mm)
This circuit is used to control the water pump to water plant or flower
automatically. It measures the soil moisture in 3 levels with delay time.
- Power Supply : 12VDC @ 1mA max.
- Consumption : 46mA(working)
and 25mA(standby).
- With 3 LEDs for showing 3 different
levels of soil moisture.
- Delay time : 4-240 seconds.
- PCB Dimensions : 2.31" x 1.29"
Page 33