Escolar Documentos
Profissional Documentos
Cultura Documentos
Reference Documentation
The following guides are referenced in this document:
NOTE: Do not run config.bat or config.sh for BI as described in the Oracle Business
Intelligence Applications Installation Guide 11g Release 1 (11.1.1.8.1). Instead, you
will run config.bat or config.sh as described in step 5 below. Do not run configApps to
configure BI Applications or perform any other step for setting up BI Applications on
this node.
4. Complete sections 15.1.13.5 through 15.1.13.11 in the Oracle Fusion Middleware High
Availability Guide > Chapter 15 Configuring High Availability for Oracle Business
Intelligence and EPM.
5. Scale out the BI system on Machine 2 following the instructions in Section 15.1.13.12
Scaling Out the BI System on APPHOST2 in the Oracle Fusion Middleware High
Availability Guide > Chapter 15 Configuring High Availability for Oracle Business
Intelligence and EPM.
6. Complete sections 15.1.13.13 through 15.1.13.19 in the Oracle Fusion Middleware High
Availability Guide > Chapter 15 Configuring High Availability for Oracle Business
Intelligence and EPM.
7. Using the Weblogic Administration Console, on Machine 2 add another ODI server to the
ODI cluster, for example, odi_server2. Associate this server to the ODI Cluster; example,
odi_cluster.
8. Using Weblogic Administration Console, restart both of the ODI Managed Servers, example,
odi_server1 and odi_server2.
9. Enable Oracle HTTP Server to route to bi_cluster and odi_cluster:
a. For BI: section 15.1.12.20 Configuring Oracle HTTP Server for the BI_SERVERn
Managed Servers in the Oracle Fusion Middleware High Availability Guide >
Chapter 15 Configuring High Availability for Oracle Business Intelligence and EPM.
b. For ODI: section 7.4.4.2 Configuring Oracle HTTP Server in the Oracle Fusion
Middleware High Availability Guide 11g Release 1 (11.1.1) > Chapter 7 High
Availability for Oracle Data Integrator.
For example:
# ODI Agent
<Location /oraclediagent>
SetHandler weblogic-handler
WebLogicCluster APPHOST1VHN1:15001, APPHOST2VHN1:15001
WLProxySSL ON
WLProxySSLPassThrough ON
</Location>
<Location /odiconsole>
SetHandler weblogic-handler
WebLogicCluster APPHOST1VHN1:15001, APPHOST2VHN1:15001
WLProxySSL ON
WLProxySSLPassThrough ON
</Location>
(replace APPHOST1VHN1:15001 and APPHOST2VHN2:15001 with actual virtual host
names and ports)
c. For BI Applications-specific applications: On WEBHOST1 and WEBHOST2, add the
following lines to the
ORACLE_BASE/product/fmw/Oracle_WT1/instances/web1/config/OHS/ohs1/mod_wl_oh
s.conf file:
# BIACM
<Location /biacm>
SetHandler weblogic-handler
WebLogicCluster APPHOST1VHN1:9704, APPHOST2VHN1:9704
WLProxySSL ON
WLProxySSLPassThrough ON
</Location>
# FSMLITE
<Location /setup/faces>
SetHandler weblogic-handler
WebLogicCluster APPHOST1VHN1:9704, APPHOST2VHN1:9704
WLProxySSL ON
WLProxySSLPassThrough ON
</Location>
http://WEBHOST1:7777/biacm
http://WEBHOST2:7777/biacm
http://WEBHOST1:7777/odiconsole
http://WEBHOST2:7777/odiconsole
Also validate that you can access these URLs using your load balancing router address:
http://bi.mycompany.com:80/biacm
http://bi.mycompany.com:80/odiconsole
13.Complete sections 15.1.13.21 and 15.1.13.22 in the Oracle Fusion Middleware High
Availability Guide > Chapter 15 Configuring High Availability for Oracle Business
Intelligence and EPM.
14.In step 3.3.10 Copying Source Files of the of the Oracle Business Intelligence Applications
Installation Guide 11g Release 1 (11.1.1.8.1), you copied the source files to a location
outside of the Oracle Homes for BI and ODI. Copy these source files to a shared location
which the ODI Agents on Machine 1 and Machine 2 can access.
15.Update the location of the source files for the physical schema of BIAPPS_DW_FILE data
server in ODI Studio:
a. Log into ODI Studio. Navigate to Topology Manager > Technology > File
b. Expand the BIAPPS_DW_FILE data server and double-click to open the physical schema.
c. In the Definition pane, for the Directory (Schema) and Directory (Work Schema)
properties, specify the shared location where you copied source files to in step 16
above.
For example,
<Source File Home on Shared Location>/biapps/etl/data_files/src_files/BIA_11
16.Log into ODI Console> Topology> Agents> Physical Agents > OracleDIAgent. Update ODI
Agent Host Name and Port Number fields to point to the front end host and port.