Escolar Documentos
Profissional Documentos
Cultura Documentos
Wheel Loader
Engine
Engine Model
Gross Power SAE J1995
Net Power ISO 9249
Weights
Operating Weight
23 698 kg
52,254 lb
RELIABILITY
DURABILITY
PRODUCTIVITY
SERVICEABILITY
Service Centers For Convenient
Maintenance
Exceptional Access To Service Points
Monitoring Systems And Dealer Support
Reduce Unexpected Downtime pg. 16
VERSATILITY
OPERATOR COMFORT
Excellent Visibility
Superior Maintenance
RELIABILITY
The Cat 966H Tested And Proven Ready To Work
Frames
Axles
Cab
Engine over-speed
DURABILITY
Built Strong And Tough
Engine End Frame (EEF). A full boxsection engine end frame with hitch plates
at the front end provides a strong, rigid
structure that resists twisting and impact
loads. The result is an extremely solid
mounting platform for the engine,
transmission, axle, ROPS and other
accessories.
Linkage. The 966H linkage is a singletilt Z-bar design. Z-bar linkage generates
excellent breakout force and good rack
back angle for better bucket loading and
load retention.
Lift arms are solid steel, providing
superior strength with an excellent front
end viewing area. The proven design
offers excellent dump clearance and
reach for exceptional matching to
both on- and off-highway trucks.
PRODUCTIVITY
Work Smart And Move More
PLANETARY POWERSHIFT
TRANSMISSION. The electronic planetary
powershift transmission with automatic
shift capability is designed and built by
Caterpillar. The very responsive, fullpower speed and directional changes
provide excellent cycle times and
productivity.
VARIABLE SHIFT CONTROL.
Match transmission shifting patterns
to machine application requirements.
Variable Shift Control (VSC) improves
shift quality and fuel efficiency in certain
applications by allowing the transmission
to upshift at lower engine RPMs.
VERSATILITY
Built For Your Operation
10
11
OPERATOR COMFORT
Work Comfortably And Efficiently
Comfortable operation
Excellent visibility
Controlled vibration
12
ENTRY AND EXIT. A ladder with selfcleaning steps keeps debris build-up to
a minimum. The ladder is at a 5 forward
incline for easy entry and exit.
Platforms are wide allowing ease of
movement to the front or rear of the
machine. The main cab door opens a full
180 and latches in place to allow safe
navigation to the rear of the machine.
13
14
Maintenance-free batteries
15
SERVICEABILITY
Easy To Maintain Easy To Service
16
17
Engine
Hydraulic System
Engine Model
Gross Power SAE J1995
Net Power ISO 9249
Net Power SAE J1349
Net Power 80/1269/EEC
Peak Torque (Net) @ 1,400 rpm
Bore
Stroke
Displacement
305 L/min
80.6 gal/min
Piston
5.9 Seconds
1.6 Seconds
2.4 Seconds
9.9 Seconds
Brakes
Brakes
Axles
Weights
Operating Weight
23 698 kg
52,254 lb
Front
Rear
Maximum Single-Wheel Rise
and Fall
Fixed front
Oscillating 13
502 mm
19.8 in
Buckets
Bucket Capacities
Max Bucket Capacity
3.4-4.2 m3
4.2 m3
4.5-5.5 yd3
5.5 yd3
Tires
Tires
Operating Specifications
Static Tipping Load, Full Turn
Breakout Force
15 474 kg
188 kN
34,120 lb
42,300 lb
Transmission
Forward 1
Forward 2
Forward 3
Forward 4
Reverse 1
Reverse 2
Reverse 3
Reverse 4
6.7 km/h
12.6 km/h
22.1 km/h
37.4 km/h
7.4 km/h
13.9 km/h
24.3 km/h
37.4 km/h
4.2 mph
7.8 mph
13.7 mph
23.2 mph
4.6 mph
8.6 mph
15.1 mph
23.2 mph
18
Choice of:
26.5R25, L-2
26.5R25, L-3 (XHA)
26.5R25, L-5 (VSDL)
26.5-25, L-3 (SRG, SHRL)
750/65R25, L-3
NOTE: In certain applications (such as load and carry)
the loaders productive capabilities might exceed the tires
tonnes-km/h (ton-mph) capabilities. Caterpillar recommends
that you consult a tire supplier to evaluate all conditions before
selecting a tire model. The 26.5-25 size range and other special
tires are available on request.
Cab
ROPS/FOPS
380 L
39 L
35 L
44 L
64 L
64 L
110 L
100.4 gal
10.3 gal
9.25 gal
11.62 gal
16.9 gal
16.9 gal
29 gal
19
Operating Specifications
Bucket
Rated Bucket Capacity ()
Struck Capacity ()
Width ()
Dump Clearance at Full Lift
and 45 Discharge ()
Reach at Full Lift
and 45 Discharge ()
Reach with Lift Arm Horizontal
and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket
at Full Raise
Loader Clearance Circle with
Bucket in Carry Position ()
Static Tipping Load Straight *
Static Tipping Load
Full 37 Turn
Breakout Force ** ()
Operating Weight * ()
Teeth and
Segments
3.65
4.75
3.10
4.06
3145
10'4"
3005
9'10"
1389
4'7"
2857
9'4"
108
4.25
8995
29'6"
5775
18'11"
14 733
48'4"
17 401
38,369
15 480
34,133
200
45,000
23 672
52,197
Teeth
3.50
4.50
2.96
3.88
3145
10'4"
3005
9'10"
1389
4'7"
2857
9'4"
78
3.07
8995
29'6"
5775
18'11"
14 733
48'4"
17 763
39,167
15 824
34,892
216
48,600
23 520
51,862
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kN
lb
kg
lb
Teeth and
Segments
3.80
5.00
3.27
4.27
3145
10'4"
2968
9'9"
1411
4'8"
2900
9'6"
108
4.25
9038
29'8"
5814
19'1"
14 756
48'5"
17 290
38,124
15 375
33,902
193
43,425
23 728
52,320
Bolt-On
Edges
3.80
5.00
3.27
4.27
3059
10'0"
3119
10'3"
1270
4'2"
2695
8'10"
108
4.25
8813
28'11"
5814
19'1"
14 550
47'9"
17 475
38,532
15 560
34,310
195
43,875
23 588
52,012
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.
* Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L-4 Firestone tires, roading fenders. powertrain
guard, full fuel tank, coolants, lubricants, air conditioner and operator.
** Measured 102 mm (4.0") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
m3
4.75
3.6
5.0
3.8
5.25
4.0
5.5
4.3
8.25
6.35
1200
1800
2000
1400
2250
1600
2500
2750
1800
3000
2000
3250
2200
3500
Material Density
% = Bucket Fill Factor
115%
20
100%
95%
3750
kg/m3
lb/yd3
Bucket
Rated Bucket Capacity ()
Struck Capacity ()
Width ()
Dump Clearance at Full Lift
and 45 Discharge ()
Reach at Full Lift
and 45 Discharge ()
Reach with Lift Arm Horizontal
and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket
at Full Raise
Loader Clearance Circle with
Bucket in Carry Position ()
Static Tipping Load Straight *
Static Tipping Load
Full 37 Turn
Breakout Force ** ()
Operating Weight * ()
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kN
lb
kg
lb
Teeth
3.80
5.00
3.28
4.29
3145
10'4"
2934
9'8"
1434
4'8"
2942
9'8"
78
3.07
9080
29'9"
5853
19'2"
14 778
48'6"
17 655
38,929
15 626
34,455
200
45,000
23 610
52,060
Teeth and
Segments
4.00
5.25
3.43
4.48
3145
10'4"
2934
9'8"
1434
4'8"
2942
9'8"
108
4.25
9080
29'9"
5853
19'2"
14 778
48'6"
17 196
37,917
15 286
33,706
186
41,850
23 762
52,395
Teeth and
Segments
4.25
5.50
3.62
4.73
3306
10'10"
2934
9'8"
1434
4'8"
2942
9'8"
108
4.25
9080
29'9"
5853
19'2"
14 924
49'0"
17 178
37,877
15 258
33,644
186
41,850
23 865
52,622
Bolt-On
Edges
4.25
5.50
3.62
4.73
3220
10'7"
3086
10'2"
1294
4'3"
2737
9'0"
108
4.25
8855
29'1"
5853
19'2"
14 720
48'3"
17 394
38,354
15 474
34,120
188
42,300
23 698
52,254
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.
* Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L-4 Firestone tires, roading fenders. powertrain
guard, full fuel tank, coolants, lubricants, air conditioner and operator.
** Measured 102 mm (4.0") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
21
Operating Specifications
Bucket
Rated Bucket Capacity ()
Struck Capacity ()
Width ()
Dump Clearance at Full Lift
and 45 Discharge ()
Reach at Full Lift
and 45 Discharge ()
Reach with Lift Arm Horizontal
and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket
at Full Raise
Loader Clearance Circle with
Bucket in Carry Position ()
Static Tipping Load Straight *
Static Tipping Load
Full 37 Turn
Breakout Force ** ()
Operating Weight * ()
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kN
lb
kg
lb
Teeth
3.65
4.75
3.08
4.02
3306
10'10"
2920
9'7"
1254
4'1"
2847
9'4"
78
3.07
8985
29'6"
5748
18'10"
14 875
48'10"
17 519
38,629
15 598
34,394
217
48,825
23 599
52,036
Teeth and
Segments
3.80
5.00
3.22
4.21
3306
10'10"
2920
9'7"
1254
4'1"
2847
9'4"
108
4.25
8985
29'6"
5748
18'10"
14 875
48'10"
17 124
37,758
15 220
33,560
201
45,225
23 790
52,457
Teeth and
Segments
4.00
5.25
3.46
4.52
3306
10'10"
2878
9'5"
1297
4'3"
2907
9'6"
108
4.25
9045
29'8"
5803
19'0"
14 906
48'11"
16 974
37,428
15 077
33,245
191
42,975
23 861
52,614
Bolt-On
Edges
4.00
5.25
3.46
4.52
3220
10'7"
3041
10'0"
1170
3'10"
2702
8'10"
108
4.25
8820
28'11"
5803
19'0"
14 702
48'3"
17 186
37,895
15 289
33,712
193
43,425
23 694
52,245
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.
* Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L-4 Firestone tires, roading fenders. powertrain
guard, full fuel tank, coolants, lubricants, air conditioner and operator.
** Measured 102 mm (4.0") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
22
Bucket
Rated Bucket Capacity ()
Struck Capacity ()
Width ()
Dump Clearance at Full Lift
and 45 Discharge ()
Reach at Full Lift
and 45 Discharge ()
Reach with Lift Arm Horizontal
and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket
at Full Raise
Loader Clearance Circle with
Bucket in Carry Position ()
Static Tipping Load Straight *
Static Tipping Load
Full 37 Turn
Breakout Force ** ()
Operating Weight * ()
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kN
lb
kg
lb
Heavy Duty
Rock Buckets
Rock Buckets
Bolt-On
Teeth and Teeth and
Edges
Segments Segments
3.50
3.50
3.50
5.00
5.00
5.00
2.99
2.99
2.99
3.91
3.91
3.91
3283
3270
3270
10'9"
10'9"
10'9"
3114
2965
2965
10'3"
9'9"
9'9"
1423
1612
1612
4'8"
5'3"
5'3"
2799
3004
3004
9'2"
9'10"
9'10"
113
118
118
4.45
4.65
4.65
8921
9169
9169
29'3"
30'1"
30'1"
5736
5736
6063
18'10"
18'10"
19'11"
14 814
14 935
14 935
48'7"
49'0"
49'0"
17 380
17 244
17 122
38,323
38,023
37,754
15 439
15 303
15 180
34,043
33,743
33,472
178
180
179
40,050
40,500
40,275
23 867
23 969
24 129
52,627
52,852
53,204
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.
* Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L-4 Firestone tires, roading fenders. powertrain
guard, full fuel tank, coolants, lubricants, air conditioner and operator.
** Measured 102 mm (4.0") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
23
Operating Specifications
Bucket
Rated Bucket Capacity ()
Struck Capacity ()
Width ()
Dump Clearance at Full Lift
and 45 Discharge ()
Reach at Full Lift
and 45 Discharge ()
Reach with Lift Arm Horizontal
and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket
at Full Raise
Loader Clearance Circle with
Bucket in Carry Position ()
Static Tipping Load Straight *
Static Tipping Load
Full 37 Turn
Breakout Force ** ()
Operating Weight * ()
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kN
lb
kg
lb
Waste Bucket
Bolt-On
Edges
6.50
8.50
5.43
7.10
3355
11'0"
2989
9'10"
1185
3'10"
2750
9'0"
134
5.28
8888
29'2"
6500
21'4"
14 871
48'9"
17 893
39,454
15 860
34,971
182
40,950
24 237
53,443
High Lift
Change
in Specs
558
1'10"
-16
-1.0"
-5
-0.20
328
1'1"
549
1'10"
124
5.0"
177
390
-3
-7
-13
-2,864
1746
3,850
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.
* Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L-4 Firestone tires, roading fenders. powertrain
guard, full fuel tank, coolants, lubricants, air conditioner and operator.
** Measured 102 mm (4.0") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
24
Dimensions
All dimensions are approximate.
10
11
5
1
2
3
12
13
14
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
9
7
3600 mm (11'10")
3552 mm (11'8")
2678 mm (8'9")
496 mm (1'8")
4224 mm (13'10")
2461 mm (8'1")
3450 mm (11'4")
507 mm (1'8")
1725 mm (5'8")
60.8
45
47.4
41.8
815 mm (2'8")
Tire Dimensions/Specifications
Width over tires
Change in
vertical dimensions
mm
inches
mm
inches
3012
3015
3017
3017
2956
3076
2992
2974
3002
119
119
119
119
116
121
118
117
118
-20
-30
-20
-20
0
-20
-44
-20
0
-0.8
-1.2
-0.8
-0.8
0.0
-0.8
-1.7
-0.8
0.0
Change in
operating weight
kg
-82
48
-24
-34
1214
-262
-358
7
0
lb
-181
106
-53
-75
2,677
-578
-789
15
0
Change in static
tipping load
kg
-67
-45
-24
-31
906
-52
-492
-158
0
lb
-148
-99
-53
-68
1,998
-115
-1,085
-348
0
25
Standard Equipment
Standard equipment may vary. Consult your Caterpillar dealer for details.
ELECTRICAL
Alarm, back-up
Alternator, 80-amp brushless
Batteries, Maintenance free (2) 1400 CCA
Ignition key; start/stop switch
Lighting system, halogen (6 total)
Main disconnect switch
Receptacle, starting, 24-volt
Starter, electric, heavy-duty
Starting and charging system (24-volt)
OPERATOR ENVIRONMENT
Air conditioner, heater and defroster
Bucket/work tool function lockout
Cab, pressurized and sound-suppressed ROPS/FOPS
Radio-ready (entertainment) includes antenna, speakers
and converter (12-volt, 10-amp)
Cigar lighter and ashtray (12-volt)
Coat hook (2) with straps
Computerized monitoring system
Instrumentation, gauges:
Digital gear range indicator
Engine coolant temperature
Fuel level
Hydraulic oil temperature
Speedometer/tachometer
Transmission oil temperature
Instrumentation, warning indicators:
Axle oil temperature
Electrical, alternator output
Engine air filter restriction
Engine inlet manifold temperature
Engine oil pressure
Fuel level
Fuel pressure, hi/low
Hydraulic filter bypass
Hydraulic oil level
Parking brake
Primary steering oil pressure
Service brake oil pressure
Transmission filter bypass
Controls, electrohydraulic, lift and tilt function
Horn, electric (steering wheel/console)
Light, dome (cab)
Lunchbox, beverage holders and personal tray
Mirror, rearview (internally mounted)
Seat, Cat Comfort (cloth) with air suspension
Seat belt, retractable, 51 mm (2") wide
Steering column, adjustable angle (SW-CCS) and length (CCS)
Wet-Arm wipers and washers, front and rear
Intermittent front wipers
Window, sliding (left and right side)
26
POWER TRAIN
Brakes, full hydraulic enclosed wet-disc with Integrated
Braking System (IBS) and brake wear indicator
Engine, Cat C11 with ACERT Technology and ATAAC
Fan, radiator, electronically controlled, hydraulically driven,
temperature sensing, on demand
Filters, fuel, primary/secondary
Filters, engine air, primary/secondary
Fuel priming pump (electric)
Muffler, sound suppressed
Radiator, unit core
Starting aid, ether (ready)
Switch, transmission neutralizer lockout
Torque converter, free wheel stator
Transmission, automatic, planetary powershift (4F/4R)
Variable Shift Control (VSC)
OTHER
Automatic bucket positioner
Counterweight
Couplings, Caterpillar O-ring face seal
Doors, service access (locking)
Ecology drains, engine, transmission and hydraulics
Fenders, steel (front and rear)
Guard, airborne debris
Hitch, drawbar with pin
Hood, non-metallic, power tilting
Hoses, Caterpillar XT
Hydraulic oil cooler
Kickout, lift and tilt, automatic (in-cab adjustable)
Linkage, Z-bar, cast crosstube/tilt lever
Oil sampling valves
Product Link ready
Remote diagnostic pressure taps
Service center, electrical and hydraulic
Sight gauges:
Engine coolant
Hydraulic oil
Transmission oil level
Steering, load sensing
Vandalism protection caplocks
TIRES, RIMS, WHEELS
A tire must be selected from the mandatory attachments
section. Base machine price includes an allowance based
on a premium radial tire.
ANTIFREEZE
Premixed 50% concentration of Extended Life Coolant with
freeze protection to 34 C (29 F)
Optional Equipment
Optional equipment may vary. Consult your Caterpillar dealer for details.
27
AEHQ5657-02 (5-07)
Replaces AEHQ5657-01
CAT, CATERPILLAR, their respective logos, ACERT, Caterpillar Yellow and the
POWER EDGE trade dress, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.