Escolar Documentos
Profissional Documentos
Cultura Documentos
DIN 8555
UTP AF
LEDURIT 60
MF 10-GF-60 GR
Application Field
UTP AD LEDURIT 60 tubular wire with high content of chromium is used for hard coatings of components
subjected to a high rate of abrasion, combined with moderate impacts and compression. In case of hard coating base
materials, make a cushion with UTP AF or UTP AF BM. Due to its structure rich in chromium carbides, UTP AF
LEDURIT 60 is indicated for coatings of hammer mill, dredge pump housings, grind knives, helical conveyor
bagasse, teeth of excavators..
Hardness
Deposited metal without dilution : 56 58 HRC
Current type: CC Inverse polarity (+)
Si
0.3
Mn
0.3
Cr
27.0
Efficiency: 5 7 Kg/h
Machine adjustment
Tubular electrode
(mm)
Corrente
Tenso
1,6
150 - 350
22 - 29
2,4
250 - 450
24 - 30
2,8
300 - 500
24 - 31
IMPORTANT:
The information presented herein should not be considered as a guarantee or certification for which we can be held
legally responsibility. These are offered to the Clients for appreciation, investigation and verification. This
information may be altered without previous notice.
maio/2006 Rev. 2
DISK SOLDAS 0800-119002