Escolar Documentos
Profissional Documentos
Cultura Documentos
Objectives
During and after the lesson the students should be able to:
Enumerate the different materials, hand tools and safety gears needed in Home Wiring
Installation for Lighting System.
Give the uses of those materials, hand tools and safety gears needed in Home Wiring
Installation for Lighting System.
Give the importance of applying safety precaution before conducting Electrical Wirings.
Draw the Electrical Line Diagram and the Schematic Diagram for Lighting System.
Topic:
b. Subtopic: Light Wirings One Bulb Controlled By Two Single Pole Switch In Two
Different Location
c.
Reference:
Title:
Pages:
Junction Box
Safety Gears
Wood Screw
Rubber Gloves
C Clamp
Hard Hut
Utility Box
Analog Tester
Hand Tools:
Sets of Pliers
Prayer
Cleaning
Greetings
Checking of attendance
Review of the past lesson
A.2 Motivation
Posting of Bible Verse
A.3 Pre-test
Draw the Electrical Line Diagram and the Schematic Diagram of One Bulb
Controlled By Two Single Pole Switch In Two Different Location
A.4 Lesson Proper (Questioning)
1. What is Home Wiring?
2. What are the materials, hand tools and safety gears needed in Home Wiring Installation
for Lighting? And its uses.
3. Why do we need to know the importance of safety precaution before conducting Electrical
Wirings?
4. What are the uses of Electrical Line Diagram or Schematic Diagram in Home Wiring
Installation especially in Lighting System?
5. How do we (you) install or connect properly the wirings for Lighting?
B. Analysis
Using the Electrical Line Diagram or the Schematic Diagram the learners
will analyze how the electrical wires are interconnected and other fixtures and
components may be connected too, and by means of Line Diagram or Schematic
Diagram the learners will visualize the exact representation of the physical
connections and physical layout of an electrical system or circuit, and during their
hands on application in electrical wiring for lighting system, they can use the
schematic diagram or line diagram for their analyzation in the actual wirings and
connect the wires accurately to avoid short circuit.
C. Abstraction (Summary)
It can be made softer and more flexible by the addition of plasticizers, the most widelyused being phthalates. In this form, it is used in clothing and upholstery, and to make
flexible hoses and tubing, flooring, to roofing membranes, and electrical cable
insulation.
An electrical junction box is a container for electrical connections, usually intended to
conceal them from sight and deter tampering. A small metal or plastic junction box may
form part of an electrical conduit or thermoplastic-sheathed cable (TPS) wiringsystem in
a building. If designed for surface mounting, it is used mostly in ceilings, under floors or
concealed behind an access panel - particularly in domestic or commercial buildings.
A wood screw is used to join two pieces of wood together. Made of steel, the wood
screw typically has a head that is designed to be used with a regular slotted or Phillipshead screwdriver.
A single pole switch allows the user to control an outlet or electrical device from one
area. It allows electricity to flow when it placed in the on position and stops the flow of
electricity when it is placed in the off position.
Analog multimeters are electrical test instruments which are used to measure voltage,
current, resistance, frequency and signal power
D. Application
Draw the Schematic Diagram of the bulb controlled by a single pole switch in one location.
Perform proper wiring installation for lighting.