Você está na página 1de 3

GEOLOG TECHNICAL PAPERS

GEOLOG International is an active contributor to the technological advances in the mud logging field. This is
achieved through its strong focus on R&D as well as its ongoing work with its clients, with whom it often works in
conjunction to design, develop and evaluate new surface logging technologies.
In this volume are some of the research papers GEOLOG has written with its clients over the years:

List of papers (chronological order)


1.

Newton S., Liu C., Al-Dawish M.S., Al-Harbi M., Esterabadi J., Shoeibi A. and Ferroni G., The Application of
Mud Gas Analysis in the Evaluation of a Complex Carbonate Reservoir, Paper EEE, SPWLA Symposium,
th
nd
Abu Dhabi, 18 -22 May 2014

2.

Newton S., Liu C., Esterabadi J., Shoeibi A. and Ferroni G., Fieldwide evaluation of a complex carbonatic
reservoir via the analysis of mud gas data from an advanced gas detection system , Paper 026, EAGE
th
th
Conference, Kuala Lumpur, Malaysia 17 18 February 2014 Petrophysics Meets Geoscience

3.

Ferroni G, Rochembauch K., Rivolta F., McWorther R., In-Situ Geochemical Analysis of Rock Samples from
th
Simultaneous Wells Enables Field-Wide Formation Characterization in Real-Time, paper GGG, SPWLA 54
annual symposium, New Orleans, June 22th-26th 2013

4.

El Gezeery T., Aziz Ismael A., Al-Anezi K., Padhy G.S., Al Saqran Fawaz., Abdul-Latif A., Silambuchelvan
Y., Estarabadi J., Ferroni G., Innovative Geosteering Technology Utilized in Drilling Smart Multi-lateral
Wells, Kuwait, OTC 24002 Offshore Technology Conference, Houston, May 2013

5.

El Gezeery T., , Al Anezi K., Ismael A.A., Silambuchlvan J., Abdul-Latif A., Das O.M., Prakash, Padhy G.S.,.
Esterabadi J., Marai N., Shoeibi A., Khan F., High Resolution ChemoSteering in Drilling Horizontal Wells,
Kuwait (SPE-164385), SPE Middle East Oil and Gas Show and Exhibition held in Manama, Bahrain, 1013
March 2013

6.

El Gezeery T., Ismael A.A., Al Anezi K., Al Jeaan M., Silambuchlvan J., Padhy G.S.,. Wasnik A., Shoeibi A.,
Drilling of Multilateral Wells Aided with Geochemical Analysis, Kuwait (IPTC 16617), International Petroleum
Technology Conference, Beijing, China, 26-28 March 2013

7.

Carugo C., Malossi A., Balossino P., Galimberti R., Gioacchini L., Pingitore F., Previde-Massara E., Rivolta
F., Advanced Cuttings Analysis Improves Reservoir Characterization and Reduces Operating Times in
Shale Gas Drilling Project, (IPTC 17186) International Petroleum Technology Conference, Beijing, China,
2628 March 2013

8.

Ferroni G., Uncertainties in Hydrocarbon Detection While Drilling: what does reliable really mean?, SPWLA
Abu Dhabi Topical Conference - Working With Uncertainty 3rd - 6th March 2013, Abu Dhabi

9.

Al-Shamali A., Verma N.K., Chandra Jha B., Estarabadi J., and Al-Khamees W., Innovative In-house
Geosteering Utilizes Gas-While-Drilling Data for Deep Jurassic High Angle Well Placement, (SPE-163368MS), International Petroleum Conference and Exhibition, Kuwait City, Kuwait, 0204 October 2012

10. Ferroni G., Rivolta F., Schifano R., Improved Formation Evaluation While Drilling with a New Heavy Gas
Detector, Paper JJJ, SPWLA 53rd annual symposium, June 16th-20th 2012, Carthagena, Colombia
11. Al-Adwani* T., Dashti J.M, Estarabadi J., Ferroni G.,Khan B., Martocchia A. and Singh K., Real Time
Advanced Surface Flow Analysis for Detection of Open Fractures, SPE 154927, Europec, Copenhagen, 4th
7th June 2012
12. Capone G., Budi Riyanto L., Carugo C., Ferroni G., Advanced Mud Gas Detection System Improves
Formation Fluid Characterization While Drilling In Challenging Indonesia Deepwater: A Case History Real
Time Advanced Surface Flow Analysis for Detection of Open Fractures, Indonesian Petroleum Association,
Thirty-Sixth Annual Convention & Exhibition, May 2012
13. Ferroni G., Rivolta F., Schifano R., Advanced Formation Fluid Evaluation While Drilling with a New Heavy
Gas Detector, Poster - AAPG International Conference & Exhibition 23rd 26th October 2011, Milan, Italy
14. Anglereaux F., McPhillimy P., Monitoring Wellbore Cleaning and Borehole Stability with Accurate Cutting
th
Volume Measuremen, SPE Bergen 1-day Seminar, Bergen, Norway, April 6 , 2011

15. Ferroni G., Dai Pra F., Advanced Surface Logging technologies provide solutions for deepwater drilling and
formation evaluation. Paper presented at the Deep Offshore Technology Conference, Amsterdam,
December 2010
16. Ferroni G., Surface Logging for Fractured Reservoirs, SPE ATW: Fractured Reservoirs Development:
Challenges and Opportunities - 1st-3rd February, 2010
17. Zausa F., Vallorani F., Concas A., Cavallaro G., Maletti G., Cesaro M., Bezzola C., Angleraux F., Kerherve
J., How To Improve Drilling Efficiency Using The Cutting Weighting Technology, ENI/GEOLOG research
paper presented at the 2005 OMC Conference, Ravenna, Italy.
18. Zausa F., Vallorani F., Concas A., Cavallaro G., Maletti G., Cesaro M., Bezzola C., Angleraux F., Cutting
Weight Sensors To Improve Drilling Efficiency, IADC 2004, Dubrovnik
19. Beda G., Carugo C., Use of Mud Microloss Analysis While Drilling to Improve the Formation Evaluation in
Fractured Reservoir, SPE 71737, 2001 SPE Annual Technical Conference and Exhibition, New Orleans,
Louisiana, 30 September3 October 2001,
20. Sanfillippo F., Brignoli M., Santarelli F.J., Bezzola C., Characterization of Conductive Fractures While
Drilling, SPE 38177, SPE European Formation Damage Conference held in The Hague, The Netherlands,
23 June 1997.
21. Zausa F., Civolani L., Brignoli M., Santarelli F.J., Real-Time Wellbore Stability Analysis at the Rig-Site, SPE
37670, ENI Research paper presented at SPE/IADC Drilling Conference, 4-6 March 1997, Amsterdam,
Netherlands, The resource was carried out in collaboration with GEOLOG
Articles regarding Formation Evaluation Gas Detection: 1, 2, 8, 9, 10, 12, 13, 15, 16
Articles regarding Formation Evaluation Geochemistry: 3, 4, 5, 6, 7, 8
Articles regarding Formation Evaluation Fracture detection: 8, 15, 16, 19, 20
Articles regarding Drilling Support Services: 8, 14, 15, 16, 17, 18, 19, 20, 21

Você também pode gostar