Escolar Documentos
Profissional Documentos
Cultura Documentos
&E
OOLS
Viscous Fan Wrenches & Holders .............................................. Page No. 152 to 154
Fan Belt Tension Gauges & Service Tools ................................. Page No. 152 to 154
Serpentine Belt Service Tools ..................................................... Page No. 152, 153
Radiator Pressure Testers & Adaptors ...................................... Page No. 164 to 169
Radiator Coolant Testers ............................................................ Page No. 171
Radiator & Heater Service Tools ................................................ Page No. 169 to 171
Radiator Hose Pinch-Off Pliers .................................................. Page No. 171
Radiator Thermometers & Anti-Freeze Testers ......................... Page No. 170, 171
TM
Diesel Injector Sockets & Pullers ............................................... Page No. 183 to 186
Diesel Injector Nozzle Testers & Adaptors ................................ Page No. 188
Diesel Fuel Pump Timing Tools .................................................. Page No. 187
Diesel Cylinder Liner Height Guage .......................................... Page No. 188
Diesel Engine Test Gauges & Adaptors ..................................... Page No. 187
Diesel Glow Plug Pullers ............................................................ Page No. 188
Diesel Compression Gauges & Adaptors .................................. Page No. 214 to 219 See Test Gauge Section
Work Safely With Hand Tools - Wear Safety Goggles
123
&E
OOLS
No.4057
Deluxe OHV Spring Compressor
Our best quality OHV spring compressor features: Heavy-duty
construction, shorter overall length for use in confined spaces,
removable handle for operation by socket wrench. Spring loaded.
Length: 4.3/4"(120mm)
No.4078
Cam Action OHV Spring Compressor
Cam action compressor removes valve springs on most OHV
engines without removing the cylinder head. Tool maintains constant
length as spring is compressed. Features extra slim-line construction.
Fast, because there is no need to readjust the tool after compressing
each spring.
Length: 6"(150mm)
No.4140
Overhead Valve Spring Compressor
No.4120
Cam Action OHV Spring Compressor
l
No.2-7928
Ford Valve
Spring Compressor
No.4129
Valve Spring
Compressor
l
No.4132
Twin OHC Valve Lifter
124
TM
No.4128
Heavy-Duty Car & Motorcycle Valve Lifter
l
No.4125
Economy Valve Lifter
&E
OOLS
No.J6231
Heavy-Duty Valve Lifter For OHC Engines
No.J6235
Double Acting Valve Lifter For OHC Engines
Designed for large petrol and diesel engines. Unique "direct action"
compressor gives improved visibility when used in difficult areas
Designed for use on multi valve petrol and diesel engines with
deep seated valves. Also suitable for general use on a wide range
of over head cam, over head valve & CVH engines.
Universal model with unique dual cam-action, parallel lift, plus
automatic locking reversible jaw.
No.4419
Flexible 14mm and 18mm Air Hold Tool
No.A1098
Hand Held Valve Spring Compressor
Use to hold valves into head when replacing valve seals or springs.
Flexible hose has 14 and 18mm threads with O-ring seals for quick
easy connection. Use with #4057, #4115, #4120, #4123, #4140,
#4158 and other valve lifters.
Inlet Thread: 1/4"NPT Female.
Length: 14"(355mm)
Quick and easy for valve removal and assembly where valve
springs require only hand pressure. Ideal for replacement of
valve stem seals without removing the cylinder head.
Supplied with two recessed adaptors: 21mm and 25mm.
Length: 7.7/8"(200mm)
No.4121
No.4418
14 & 18mm Air Hold Fitting Set
l
No.4122
No.4158
CVH Valve
Spring Compressor
No.4121
Small Recessed Valve Adaptor
Diameter: 1.1/16"(27mm)
Length: 57mm
No.4122
Large Recessed Valve Adaptor
Diameter: 1.1/4" (32mm)
Length: 70mm
125
&E
OOLS
No.4117
Universal Valve Lifter
Heavy-duty construction,
universal application. This
valve lifter will compress the
stiffest valve springs. Fully
adjustable to suit any valve
stem length. Slim rugged jaws
allow maximum room to
remove or replace valve collets.
Supplied with #4118 straight
and #4119 offset jaws.
Maximum Opening: 9"(230mm)
Throat Depth:
9"(230mm)
No.4118
No.4119
No.4058
OHV Spring Compressor
Lever Type 3/8" & 7/16" Studs
No.4150
Air Operated Valve Lifter
No.4056
Thin Jaw Overhead Valve
Spring Compressor
Replacement Jaws:
No.4150-R
No.4115
Universal OHV Spring Compressor
l
This universal valve spring compressor has been developed to remove and
install valve springs with the cylinder head still on the engine in the car, or with the cylinder
head removed. The multi-point adjustable base of this tool bolts securely to the head
while the adjustable lever mechanism pivots from the bar thus compressing the spring.
Quick removal and installation of the spring retaining keepers is easily accomplished
through the large openings on both sides of the compression tube.
Includes air hold adaptors for both diesel and petrol engines. Supplied in blow mold case.
Bar Length: 20"(508mm)
126
TM
No.4124
Motor Cycle Valve Lifter
Special design for motor cycle overhead
cam engines. Compact, rugged, powerful &
is simple and fast to use. 3 Recessed valve
adaptors included. 19, 23 & 25mm.
Maximum Opening: 5.1/2"(140mm)
Throat Depth: 4"(100mm)
No.4131
Side Valve Spring Compressor
Approved for Briggs & Stratton
The ideal tool for removing and replacing valve springs on Briggs
and Stratton and other small side valve engines. Long and slender,
it is adapted to reach into small recesses. Spring steel jaws are
adjustable in width to fit the valve springs and have edges so thin
they can be easily forced under and over the ends of the valve
spring to compress it for removal.
Length: 9"(230mm)
l
No.4156
Valve Collet Replacer
Replaces tapered split collets on recessed valve springs quickly
and easily. The spring loaded unit places collets in position on
recessed heads instantly. Includes magnet on reverse end to
retrieve collets.
Length: 8.1/4"(210mm)
&E
OOLS
No.4123
Bar Type Valve Spring Compressor
l Locks onto Over Head Valve Rocker Stud
Universal application on overhead valve engines.
Use with or without removing cylinder head. Designed for
V8 engines and other engines with stud type rocker arms.
Fasten tool to stud for lever point to compress valves.
Length: 12.9/16"(320mm)
No.4154
Twin Cam Valve Collet Installer
Works with multi valve engines eg. (16V & 24V & 32V) Replaces
tapered split collets on recessed valve springs quickly and easily.
The spring loaded unit places collets in position on recessed
heads instantly. Includes magnet on reverse end to retrieve collets.
Length: 8.1/4"(210mm)
10mm 12Pt Opening
No.88250
Shim Style Valve Adjusting Set
No.4625
Honda VTEC 10mm Valve Adjusting Tool
No.4955
5Pc. Universal Valve Adjustment Wrench Set
No.4157
3Pc. Valve Keeper Installing Kit
This two in one tool features a window in the socket. The visual
contact allows for quicker valve adjustment times as the technician
can hold the adjustment screw exactly where he wants it.
The unique handle pivots from one side to the other, so the window
is always visible. Hex Sizes: 10mm, 12mm, 13mm, 1/2" & 9/16"
Lengths: 7.1/2"(190mm)
TM
127
&E
OOLS
No.V20
Adjustable Valve Guide Cleaner
No.4932
Valve Stem Seal Removal Pliers
Valve guides cleaned with this tool are really cleaned with no gum,
no carbon and no scale left. Use manually or with 1/4" electric drill.
Blades of flat spring stock are extremely flexible and give a fine
cutting action. Correct tension for various guide hole sizes is
regulated by the adjusting nut.
Capacity: 5/16" to 5/8"(8 to 16mm)
Length: 8.7/8"(225mm)
Reach down around the valve stem into confined areas of the valve
guide for seal removal. Serrated jaws grip firmly onto seals for easy
removal.
Length: 10"(250mm)
No.4312-S
Valve Lapping Tool Set
For hand lapping engine valves. Neoprene rubber cups are resistant
to oil, gasoline & grease. Set contains 5/8" & 13/16"(16 & 21mm)
and 1.1/8" & 1.3/8"(28 & 35mm) double end valve lapping tools.
No.4301
Oscillating Valve Lapper
Available Separately:
No.4155
Magnetic Recessed Valve Adaptor
l For OHC Applications
For use on recessed valve springs on overhead
cam applications.
Removable magnetic ring grabs split collets easily.
Tool fits into jaws of most standard valve lifters.
Diameter: 1.1/4"(32mm) Length: 2.1/4"(57mm)
No.4302
Oscillating Valve Lapper
Short back and forth strokes constantly advancing the valve to a
new seat position thus insuring a perfect seal in the least amount
of time. A thrust ball bearing on the spindle gives smooth action.
Includes: 7/8"(22mm) & 1.1/8"(28mm) Vacuum cups.
Length: 6.3/4"(172mm)
No.4148
30mm Magnetic Recessed Valve Collet Clamp
For use on recessed valve springs on overhead cam applications.
Removable magnetic ring grabs split collets easily.
Fits into jaws of most standard valve lifters.
Length: 60mm
Diameter: 30mm
No.4931
Valve Stem Seal Installation Kit
Set Contains:
No.4149
33mm Magnetic Recessed Valve Collet Clamp
For use on recessed valve springs on overhead cam applications.
Removable magnetic ring grabs split collets easily.
Fits into jaws of most standard valve lifters.
Length: 60mm
Diameter: 33mm
128
TM
No.4982
Long Reach Valve Seal Removal Pliers
For valve stem sealing rings, the special long slim form allows
quick easy and safe removal of valve-stem oil-seals, even on
4-valve cylinder heads. Length: 12"(300mm)
No.4130
Valve Collet
Release Slide Hammer
&E
OOLS
No.4163
Valve Shim Disc Removing Pliers
Special design tips on the pliers for removing shim discs on
overhead and twin overhead camshaft engines.
Length: 11"(275mm)
No.92121
Mitsubishi Hydraulic Valve Lifter Remover
No.4925
Universal Valve Stem Seal Remover
No.4164
180mm Valve Adjusting Depressor
Special design bar depressor to enable removal and replacement of
spacer shims to obtain the correct camshaft height. Suits: Fiat Tipo
1.4DGT. Use in conjunction with #4163 Shim Pliers. Length: 180mm
No.4165
230mm Valve Adjusting Depressor
No.4981
Valve Stem Seal Pliers Peugeot, Citroen etc.
For valve stem sealing rings. The special long, slim form allows
quick, easy and safe removal of valve-stem oil-seals, on Peugeot,
Citroen and many other vehicles.
Length: 8.1/2"(215mm)
No.4166
245mm Valve Adjusting Depressor
No.4956
9/16" Valve Lash Adjuster
No.4958
Click / Adjust Tappet Adjuster
Select the correct size 3/8" drive socket to fit tappet lock
nut, unlock the nut and the slotted screwdriver blade can
then adjust the tappet clearance. By holding adjustment
with screwdriver handle tighten lock nut with socket and
handle. Job can be done without using three hands.
Size: 3/8"Drive 6mm Slotted screwdriver blade
Length: 5.7/8"(150mm)
TM
No.4957
5/8" Valve Lash Adjuster
Offset valve adjustment wrench with
T-handle hex keys makes valve adjustments
possible without having to use three hands.
For use on adjusters fitted with hexagon
head adjustment nut.
Size: 5/8" 12 Point hexagon
3/16" & 7/32" T-handle hex key wrenches
129
&E
OOLS
Precision machined tungsten carbide blades produce valve seats with accurate
seat angle, superior seat surface, and a true flat seal with the seats concentric to
the valve guide.
Contents: 3 Expandable pilots covering a range of 5.5mm thru to 9.5mm
4 Pin "T" Wrench Handle
37 to 46mm 68 & 45 Double Sided Tungsten Carbide Cutter
37 to 44mm 75 & 30 Double Sided Tungsten Carbide Cutter
28 to 35mm 75 & 45 Double Sided Tungsten Carbide Cutter
No.4930
Valve Stem Seal Installation Kit
Set Contains:
No.4950
No.4951
No.4952
J4950
No.4953
No.4954
Pneumatic valve guide drivers are used to remove and install replaceable
valve guides on aluminium or cast iron heads.
No.1988
No.1990
No.1991
No.1992
130
1988
Length: 6"(150mm)
Length: 6"(150mm)
Length: 6"(150mm)
1991
Length: 6"(150mm)
1992
1990
No.4676
Expanding Collet Hydraulic Tappet Puller
Removes hydraulic valve lifters from the top side of engine.
Hardened steel jaws grip lifter by expanding into inside groove to pull
valve lifters out of bore. Removes most stuck hydraulic valve lifters.
Capacity: 1/2" to 3/4"(13 to 19mm)
Length: 11"(280mm)
No.4678
Heavy Duty Hydraulic Valve Tappet Puller
&E
OOLS
No.4675
Quickie Hydraulic Tappet Remover
Removes hydraulic valve lifters from the top side of engine.
Hardened steel jaws grip lifter by expanding into inside groove
to slide valve lifters out of bore.
Capacity: 1/2" to 3/4"(13 to 19mm)
Length: 11"(280mm)
No.92120
Ford Lifter Bleed Down Tool
No.4756
Hydraulic Tappet Remover
No.4015
Over-Head Cam Follower Remover
No.4344
Rocker Stopper Oil Plugs
Plug oil holes in ball-joint type rocker
arms. Spring steel clips with gaskets
stop splashing or squirting of hot oil
while you adjust valve clearance.
Designed for cars with hollow, oil-fed
push rods. Length: 1"(25mm)
No.U1900
19mm Crowsfoot Tappet Adjusting Wrench
Designed to allow adjustment of valve clearance without the
need to remove the carburettor on Ford OHC and other engines
with 3/4" or 19mm nut sizes.
Size: 3/4"(19mm)
Length: 4"(100mm)
TM
Here is the easiest way to remove OHC followers from the cylinder
head. Simply insert the remover, spread the jaws and attach a slide
hammer, with a shaft size of either 1/2"UNC or 5/8"UNF, pop it out.
Capacity: 5/8" to 11/16"(16 to 18mm)
Length: 3.3/4"(95mm)
No.4342
Rocker Arm Oil Deflector Set
For engines with pressure lubricated push rods.
Deflects oil from rocker arm to valve chamber.
16 Individual deflectors in set permit both
banks of valves to be adjusted simultaneously.
Easily snapped on to rocker arm.
Metal storage panel included with set.
No.4016
Rocker Arm Stud Remover & Installer
For removal and installation of press fit rocker arm studs with
either 5/16" or 3/8" diameter. Fits most GM and Ford vehicles
with "press fit" rocker arm studs. This tool provides the correct
method for removal and replacement of these difficult to service
studs. Length Stud: 4"(100mm)
Hex Body: 2.3/4"(70mm)
131
&E
OOLS
No.4710
Metric Dowel Puller Set
At last a tool to handle the near impossible task of removing
press fitted dowel pins from cylinder blocks, crankshafts or
anywhere dowel pins are fitted.
Supplied in blow mold case.
Set Includes:
Available Separately:
No.4720
Imperial Dowel Puller Set
Available Separately:
No.6474
600mm Precision Straight Edge
Used for checking warpage on engines and machine parts, etc.
Made from high carbon steel and machined to accurate
specifications and dimensions for exact measurements.
"T" Shaped body with elongated holes prevent any distortion.
Supplied in metal storage case.
Depth: 1.3/8"(35mm)
Width:
5/8"(16mm)
Length: 23.5/8"(600mm)
No.5598
3/4"Drive Torque Angle Gauge
Use on newly required "Torque to Yield" bolts on aluminium
cylinder heads etc, on many late model vehicles. Gives accurate
angle measurement as per specified requirements.
A must for correct new automotive engine assembly.
Range: 0 to 360 in 2increments
Diameter: 3.1/2"(90mm)
Features Flex Arm
with Clamp
No.5597
No.4345
1/2"Drive Torque Angle Gauge
Cylinder Head Holding Stands l Features Flex Arm with Clamp
Tapered Pins Fit All Stud Hole Sizes
Sturdy stands hold cylinder heads safely
and securely while you repair cracks,
grind seats, clean carbon or perform valve
guide work. There is ample clearance
under heads for knurling and reaming
valve guides. Two stands per set.
Overall Height: 10.1/2"(265mm)
l
132
TM
No.5595
Cylinder Head
Torque Angle Gauge
Use on newly required "Torque to Yield"
bolts on aluminium cylinder heads etc, on
many late model vehicles. Gives accurate
angle measurement as per specified
requirements. A must for correct new
automotive engine assembly.
Range: 0 to 360 in 1increments
Diameter: 2.3/4"(70mm)
Drive: 1/2"Square
&E
OOLS
No.4730
Metric Threaded Adaptor Slide Hammer Rail Pin Puller Set
2.1/2lb Slide hammer with six interchangeable threaded pins for extracting pins and studs with threaded holes fitted to many engines etc.
The threaded adaptors fit the following sizes: 1: 4mm 2: 5mm 3: 6mm 4: 8mm 5: 10mm 6: 12mm
Length: 14"(356mm)
No.4702
Benz & BMW Guide Rail Dowell Pin Puller
Can remove even the most stubborn pins from the cylinder head,
unlike the short slide hammer previously used to attempt this job.
The new designed puller incorporates a thrust bearing to ease the pulling
action. This heat treated tool has been tested and proven to be the best
solution on many vehicle makes. Supplied with two interchangeable adaptors.
Sizes: 6 x 1.0mm & 8 x 1.25mm
Length: 5.1/2"(140mm)
No.4928
Universal Camshaft Pulley Rotating Tool
No.6278
BMW Camshaft Sprocket Extractor & Installer
Suitable for timing pulleys with holes from minimum 16mm eg: VW,
Audi, Ford, Opel, Peugeot, Renault, Citroen, Rover, Volvo, Japanese Applicable for BMW 4- and 6-Cylinder twincam engines M42, M44,
vehicles etc. To prevent pulley on camshaft, injection pump, etc.
M50 and M52 with Vanos unit. Required for removing and installing
from rotating. Length: 14.1/8"(360mm)
the Vanos adjusting unit with disc spring. Length: 6.3/4"(170mm)
Suits Lexus &
Toyota
No.4160
Auto Valve Tool
No.J4222
30Pc.Crank Pulley Hollow Locking Plate Set
Locking Plate Set for locking crankshaft pulleys on Japanese engines.
TM
133
&E
OOLS
2" Replacement
Stones
4321
Grit: 400
4323
Grit: 220
4322
4325
4320
Grit: 100
4325
4325-F
4330
4333
4" Replacement
Stones
4326
4324
4327
4333
4328
4331
Bottle Brush Type Ball Hones
are listed on page 147
4329
134
TM
&E
OOLS
For Dry Sleeve Manual & Hydraulic Sleeve Pullers See Puller Section on Page 311
No.2-1205
Universal Puller for Wet Type Sleeves
This puller features adjustable jaws to fit cylinder sleeves 3" to 6.1/2"(75 to 165mm) Cone adjustment positions the
puller jaws and they are locked into place when the locking bar is tightened. To aid in breaking "frozen" sleeves loose,
the adjustable bridge is positioned on the cylinder block and the bearing-mounted forcing nut is tightened to break the seal.
Finally sleeves are removed with the use of the 5lb. 5/8" UNF threaded slide hammer.
Length: 18"(457mm)
No.4289
Standard
Ridge Reamer
Lathe Action
Popular Size
No.4288
Spring loaded tungsten
carbide cutter maintains
Small
even cutting pressure
Ridge Reamer
on cylinder walls. Even
l Lathe Action
those with ovality wear.
l Small Engine Model
Smooth cutting is assured
Spring loaded tungsten carbide cutter
by the fine thread feed. Change from one
maintains even cutting pressure on cylinder
cylinder to the next without re-adjustment of
walls. Fine fit adjustment and can change from the precision spring loaded cutter.
one cylinder to the next without re-adjustment. Full instructions included.
Capacity: 3" to 5"(75 to 125mm)
Capacity: 2" to 3"(50 to 75mm)
Length: 5"(127mm)
Length: 4"(100mm)
No.4288-C Replacement Carbide Cutter No.4289-C Replacement Carbide Cutter
No.4290
Large Ridge
Reamer
l
l
Lathe Action
Truck Engines
Same features
as #4289 with
capacity to
handle truck
and large size
cylinder bores
Capacity can be extended using #4291 Legs.
Full instructions included.
Capacity: 4" to 6"(100 to 150mm)
Length: 6.3/8"(162mm)
No.4290-C Replacement Carbide Cutter
No.4918
Welsh Plug
Installing
Tool Set
This tool speeds up the cumbersome, awkward job of replacing welsh plugs. It drives them
into place securely eliminating the need to remove engines, mounts or to cut fire walls.
Set Contains:
Part No.
4918-1
4918-2
4918-3
4918-4
4918-5
Available Separately
Description
16" Bent Freeze Plug Driver
Coupling Nut
20mm x 35mm Adaptor
25mm x 35mm Adaptor
30mm x 41mm Adaptor
No.4919
Part No.
4918-6
4918-7
4918-8
4918-9
4916
Description
35mm x 45mm Adaptor
40mm x 50.5mm Adaptor
45mm x 60mm Adaptor
50mm x 60mm Adaptor
Welsh Plug Puller
Eliminates the need to remove engines, mounts or to cut into fire walls.
All parts are machined from high quality alloy steel with nickle chrome plate finish.
Set Contains:
Part No.
4919-1
4919-2
4919-3
4919-4
TM
Description
18" Bent Freeze Plug Driver
Coupling Nut
1.3/4" x 2.3/4" Adaptor
1.1/2" x 1.7/8" Adaptor
Available Separately
Part No.
4919-5
4919-6
4919-7
4919-8
Description
1.1/4" x 1.5/8" Adaptor
1" x 1.3/8" Adaptor
3/4" x 1.5/16" Adaptor
8" Straight Freeze Plug Driver
No.4291
Large Ridge
Reamer Extension Set
These extension legs fitted to #4290 large
ridge reamer extend it's capacity to a
full 7"(180mm).
Capacity: 6" to 7"(150 to 180mm)
No.4916
Welsh Plug Puller
Welsh Plug Puller removes frozen plugs
up to 2"(50mm) in diameter. Just drill a
17/64" hole and screw in the forcing screw.
Use a 5/8" socket or wrench to remove
the freeze plug from its housing.
Length: 2.3/4"(70mm)
135
&E
OOLS
No.4217
Small Engine
Piston Ring Compressor
Beaded along lower edge to prevent
compressor entering cylinder. Utilises
dependable friction-type brake to hold
rings in compression.
Capacity: 1.3/4" to 3.1/2"(45 to 90mm)
Depth:
1.1/2"(38mm)
No.4214
Standard Ring Compressor
l
No.4216
Large Ring Compressor
l
No.4215
Diesel Ring Compressor
l
No.CL337
9Pc. Piston Ring Service Set
Set Includes: Ring Compressor 55-125mm, 75mm Long
136
TM
No.4216-S
Can Be Used for
Compressing
Automatic
Transmission
Pump Seals
No.4216-S
Extra-Large Ring Compressor
Self locking heavy-duty ratchet pawl prevents premature release.
Double tension bands of the highest grade spring steel eliminate
any bottom flare. Adjusting screws on ratchet release allow tension
and friction to be set for smooth operation.
Capacity: 7" to 10"(180 to 255mm) Depth: 3.1/2"(90mm)
No.7082
Universal Piston Pin Remover & Installer
&E
OOLS
4980
4220
Set Contains:
#4980-A Pliers
#4980-B Band
#4980-C Band
#4980-D Band
#4980-E Band
#4980-F Band
#4980-G Band
Length: 10.3/4"(275mm)
x 1.1/2"(38mm) Wide
4980
4980-C
4980-D
a
4980-E
a
4980-F
a
4980-G
4980-P
a
4980-H
a
4980-I
a
4980-J
a
4980-N
a
4980-K
a
4980-M
a
4980-A
TM
Replacement Bands
No's. 4980-B to 4980-P
4980-A
137
&E
OOLS
No.4200
Piston Ring Expander
with Stop
No.4219
Piston Ring Expander
without Stop
No.4218
Universal Piston
Ring Expander
Universal design handles all ring widths
to 1/4"(6.3mm) Flat and smooth edge
jaws lock onto ring to enhance the gripping
power. Eliminates damage and breakage
of rings.
Length: 6.1/4"(159mm)
No.4202
No.4201
No.4204
Small Piston Ring Expander Standard Piston Ring Expander Large Piston Ring Expander
l
No.4222
Piston Ring Groove Cleaner
l
Absolutely the best ring groove cleaner available today. Features fully adjustable depth
stop to limit depth of cut and side flanges for slotted and standard pistons. Both metric
and imperial cutters feature ring land trimmer as well as five different sized cutters.
Spring detent ball controls alignment of blade. Cutters are hardened and ground.
Capacity: 2.5/8" to 5"(65 to 130mm)
Length: 11.3/4"(298mm)
No.4222-A
No.4222-M
No.4210-B Replacement
Carbide Coated Cutter File
Work Safely With Hand Tools - Wear Safety Goggles
138
No.4210
Piston Ring Gap Filer
1/2" Drive
No.4395
Electric Fuel Pump Gas Tank Retaining
Ring Removal Tool
&E
OOLS
No.4396
GM / Ford Diesel Fuel Cap Wrench
No.4399
Ford Fuel Pump Wrench
For removal and installation
of the fuel pumps with a plastic
retaining nut.
Suits all Ford Falcon models
Special 8 slot wrench with 103mm ID for removing and installing
XE, XF to current.
fuel tank lock-rings on vehicles with CFI & EFI Fuel systems. 1/2"
Square Drive. Length: 10.1/2"(265mm) Diameter: 4.1/2"(115mm) Circle Diameter: 6.1/8"(155mm)
No.4408
Fuel Tank Sender Unit Wrench
No.4550
Honda / Acura Fuel Filter
Banjo Bolt Socket
J444
0 17
mm
TUBE
No.4349
Hose Remover Pliers
Remove vacuum and fuel hoses easily with these unique pliers.
The sharp edge jaw grips securely on the tube whilst the smooth
jaw pushes off the hose.
Works on all hoses from 5/32" to 1/2"(4 to 13mm) diameter.
Length: 7"(180mm)
No.4348
Vacuum Line Identifiers
l Matches Up Lines & Ports
Contains six sets of matching plugs
and caps. Coloured sets
eliminates incorrect hook-ups.
Speeds work on emission controls,
engine rebuilding, and cylinder
heads. Made of natural rubber.
Eliminates the need of referring
to service manuals for re-assembly.
Supplied with wire storage clip.
TM
J44
44
14m
m
No.J4444
No.J4440
No.4347
X-Large Vacuum Hose Remover Pliers
Remove vacuum and fuel hoses easily with these unique pliers.
The sharp edge jaw grips securely on the tube whilst the smooth
jaw pushes off the hose.
Works on all hoses from 5/32" to 1.7/8"(4 to 48mm) diameter.
Length: 9.1/2"(240mm)
No.4350
Vacuum & Fuel
Line Stoppers
Stepped design plugs fit all
1/8", 3/16", 1/4", 5/16", 3/8"
& 1/2"(3 to 13mm) hoses.
Tapered caps close tubes.
Use during tune-ups,
vacuum tests, fuel pump
repairs etc. Bead chain
supplied for ease of storing.
139
&E
OOLS
No.9582
Universal Pulley Holder
No.3471
Universal Pulley Holding Tool
Designed to trap and hold bolt-on pulleys by gripping on the
mounting bolts, works on most applications where studs protrude.
It is ideal for removing and replacing thermostatic fan assemblies
while eliminating the need for various sized holding wrenches.
Length: 22"(560mm)
Features 5mm & 9mm pins which locate into pulley holes to prevent
the flywheel & clutch assembly from rotating whilst servicing the
motor. Adjustable lock screw enables adjustment to all diameters.
Capacity: 1/2" to 9"(13 to 225mm)
Length: 13"(330mm)
No.3475
Universal Pulley & Camshaft Holding Tool
No.A1081
Adjustable Camshaft Pulley Holder
No.4645
Honda Crankshaft
Pulley Holding Tool
No.J1807
Camshaft
Drive Belt
Pulley Puller
Special puller designed for pulling camshaft pulley wheels on 4 & 6
cylinder, V6 and V8 engines on VW and Audi petrol engines.
Body Length: 5.1/4"(133mm)
1/2"Drive
120mm Long
No.4639
Honda Universal Crankshaft
Pulley Holding Wrench
Holds the harmonic balancer pulley from rotating
when removing the pulley bolt. There is a hole in the
centre of the tool to allow the use of a socket and extension to break
loose or tighten the pulley bolt. Suits Honda models: Accord, Civic,
CRV, Insight, Odysey, Prelude, S2000, Integra, Legend, NSX etc.
Suits Honda
No.4650
Crankshaft & Harmonic Balancer Holder Set
140
TM
No.4635
Crankshaft Pulley Holding Tool
No.J1860
Universal Grooved Pulley Puller
Puller has adjustable arms to pull most ribbed & groove type engine
pulleys fitted to late model engines. Suitable for use on crankshafts,
alternators, air conditioning compressors, water pump pulleys, etc.
Maximum Spread: 6.1/2"(165mm)
&E
OOLS
No.4366
Mazda Crankshaft Holding Tool
No.7521
Flywheel Holder / Turner
No.4709
Ford Rear Main Seal Installer
No.4708
Rear Main Bearing Oil Seal Deluxe Kit
No.A1093
Subaru Impreza Crankshaft Pulley
Remover & Replacer
No.J4200
Ford Front Crankshaft Hub Bolt Remover
Removes & installs front crankshaft pulleys, permitting in-chassis
replacement of timing belts. Suits Ford Escort/Lynx 1.6Litre engines.
Size: 3/4"(19mm) x 1/2"Sq. Drive
Length: 9.1/2"(241mm)
No.4707
GM V6 3800 Commodore
Rear Main Bearing
Oil Seal Installer
Essential tool needed for installing and
replacing rear main bearing oil seal on GM
Holden V6 3800 engines. Diameter: 3.7/8"(165mm)
124mm Long
No.4706
GM V6 3800
Commodore Rear Main
Bearing Housing Aligner Set
98.5mm
Diameter
No.4714
Rear Main Bearing Oil Seal
Remover & Installer Kit
No.J1805
Crankshaft Pulley & Drive Belt Pulley Puller
No.A1115
Crankshaft Pulley & Camshaft Pulley Puller
141
&E
OOLS
No.9260
Two & three way flange plate with adaptors to pull harmonic balancers,
steering wheels, flanges, etc. Includes short & long forcing screw.
Bolt sets included:
3 of 3/8" UNC x 4" long
2 of 1/4" UNF x 3" long
3 of 3/8" UNF x 2" long
3 of 5/16" UNC x 2" long
3 of 8x1.25mm x 40mm long
3 of 5/16" UNC x 4.1/2" long
2 of 8x1.25mm x 65mm long
2 of 5/16" UNF x 3.1/2" long
3 of 8x1.25mm x 80mm long
3 of 3/8" UNC x 2" long
3 of 10x1.50mm x 50mm long
Bolt Circle Diameters: 1.1/4" to 4.5/8"(32mm to 118mm)
No.T9516
Balancer Puller & Replacer 22mm Forcing Screw
New Smaller Diameter Centre Screw to Fit
Late Model Holden 3800 V6 Commodore Engines
No.T9515
Balancer Puller & Replacer 13mm Forcing Screw
No.9262
50Pc. Harmonic Balancer Remover & Replacer
Set includes nine complete sets of mounting bolts to fit most imperial
& metric applications. Two size centre forcing screws with flat, large
& small tapered forcing screw swivel caps. Eight imperial & metric
threaded replacing adaptors, large hex forcing screw, nut & thrust
bearing. Many jobs can be performed without removing the radiator.
Bolt Circle Diameters: 1.1/4" to 4.5/8"(32mm to 118mm)
142
TM
Eight imperial & metric threaded adaptors, plus an end cap adaptor.
Shouldered bolts to suit 3800cc V6 Commodore engines. The pulling
plate, fitted with its needle race thrust bearing removes or replaces
the pulley by the position of the thrust nut. Instruction included.
Sets include:
Adaptors: 7/16", 1//2", 9/16", 5/8" & 3/4" UNF
No.J518
2/3 Way Flange Puller Set
&E
OOLS
No.9514
Harmonic
Balancer
Replacer Set
The built-in thrust
assembly allows you
to easily press the
pulley back into place
using a ratchet wrench on the large hex forcing nut.
Many jobs can now be performed without removing the radiator.
Installer supplied with eight imperial & metric adaptors.
Adaptors: 7/16" x 20,
1/2" x 20, 9/16" x 18, 5/8" x 18,
3/4" x 16, 12 x 1.5mm, 14 x 1.5mm 16 x 2.0mm
Forcing Screw Cap Fitted with Roller Bearing
No.J9260
Short Screw Harmonic
Balancer Puller
No.9526
Adaptor Set to suit Holden
3 of 5/16"UNF x 3"(76mm)
3 of 3/8" UNF x 3"(76mm)
Bolt Circle Diameters: 1" to 3.3/4"(25mm to 95mm)
Bolt Sizes:
No.A7006
Universal Flywheel
Holding Tool
No.9515
Commodore Harmonic Balancer Aligner
l
No.9512
Harmonic Balancer Puller
Suits GM V6 3800 Commodore
No.9516
l
Two size rods fit into forcing screw for different crankshaft lengths.
Puller has 8 Ton capacity and the compact short legs in most cases
eliminates the need for removal of the radiator & A/C condenser for
access. Circle Diameter: 7"(180mm)
143
&E
OOLS
No.9517
Chrysler Harmonic
Balancer Holding Tool
No.4555
Nissan Timing Chain Holding Wedge
Fits 1968 - 1979 1.6L & 2.0L four cylinder engines. Also fits
1970 - 1983 2.4L, 2.6L & 2.8L inline six cylinder engine on "Z" cars.
Keeps timing chain from dropping inside timing cover while
cylinder head or camshaft is removed.
Length: 9.1/8"(232mm)
No.6269
Volkswagen Camshaft Timing Tool Set
Used to retain and lock the camshaft timing when replacing the
timing belt or servicing engine parts. Suits Volkswagen Bora, Golf,
Lupo and Polo TDI's.
Tool: 2.1/2" x 2"(64mm x 50mm) Pin: 3.3/8"(85mm)
No.J4936
Ford Timing Chain
Tensioner Adjusting Tool
Used for removal and installation of timing
chain tensioners on Ford 3.9L & 4.0L 6
cylinder engines. Models EA Falcon and on.
Pitch Circle Diameter: 1"(25mm) Pin Diameter: 3/16"(5mm)
Hex Head: 3/4"(19mm)
41mm
No.4575
Nissan Timing Chain Holding Wedge
Tapered wedge is used to keep timing chain from dropping inside
timing cover while cylinder head or camshaft is removed.
Safety hook supplied to prevent wedge from dropping inside the
engine. Length: 4.7/8"(124mm)
A
No.4935
Ford Timing Chain Adjuster
46mm
No.4936
Timing Chain Tensioner Tool
Used on overhead cam engines with timing chains
including: Mazda, Mitsubishi, Chrysler, Nissan,
1/2" Drive crowfoot wrenches give access to engine timing belt
Toyota & most Asian vehicles. The tool holds the timing chain in
tensioners on GM and Asian vehicles. Lengths: 3.1/2"(90mm)
place while removing cylinder head, servicing camshaft gears, etc.
lever designed tool applies smooth tension on timing chain.
No.6265 41mm Timing Belt Tensioner 1.2L,1.3L, Cam
The special long hook is required on some vehicles to release the
1.4L, 1.6L, 1.6D, 1.8L engines, '87 and onwards
chain tensioner. O-ring on adjustment nut holds socket onto tool.
Eliminates using bulky wood blocks which obstruct cylinder head
No.6267 46mm Timing Belt Tensioner
removal. Length: 10.3/8"(264mm) Hook Length: 16.1/2"(420mm)
1.6L, 1.7D, 1.8L, 2.0L engines, up to '87
No.4948
Toyota Timing Belt
Tensioner Compressor
For 1995 and later T-100, Tacoma,
and 4Runner. Turn square to
compress tensioner, then install
locking pin.
Lengths: 5.1/2"(140mm)
144
TM
No.6466
3-in-1 Bosch Timing Tool
M8, M10, M12
Combination tool suitable for use on Bosch
VE type fuel injection pumps and also for
new pump with M10 service port. Also fits
Kiki and Nippon Denso pumps. Includes
adaptors and control rods. Adaptors supplied
with 8mm threads plus M10 and M12 adaptors. M10
adaptor is new and is suitable for service ports commonly found on
VW/Audi, Volvo, Renault and Ford Transit.
&E
OOLS
Suits:
4.6 Litre
5.4 Litre
V8 Engines
& 6.8 Litre
V10 Engines
No.4924C
For setting the camshaft timing on 1991 thru to current 4.6 litre twin
valve engines, 5.4 litre V8 & 6.8 litre V10 engines. Two locking plates
& two cam positioning tools that install onto the camshaft to prevent it
from rotating when adjusting the cam timing. Length: 8.1/4"(210mm)
No.6268
Mazda / Ford Engine Locking Plate
Locking plate for camshaft setting. Suits Ford 1.6L, 1.8L & twin cam
16 valve petrol engines. Used for finding crankshaft TDC location on
Ford 1.3L & 1.4L engines plus Puma1.7L engines. Use with TDC
pin for Mazda 121, 1.3L petrol engines. Supplied with warning tag.
Length: 8.3/4"(222mm)
No.98700
Mitsubishi / Hyundai / Chrysler
Timing Belt Tensioner
Allows for easy adjustment of the camshaft
spur belts having idler pulleys with pin holes.
Protruding pins grip the centre of the idler
pulley and rotate it around its off-center
retaining bolt. This rotation then allows for camshaft spur belt
tension adjustment. 1/4"Drive for use with torque wrench.
Made from heat treated alloy steel. Pin Dia: 3/16"(5mm)
No.4287
Camshaft Locking Bar Set
No.6282
Holden / Astra / Opel
Twin Cam Locking Tool
For Twin Cam ECOTEC 16v Engines
No.6275
4 Pin Twin & Quad
Cam Locking Tool
No.6273
Mercedes Benz Camshaft Alignment Tool
Holds the camshaft at 40 to TDC position for both Left and Right
hand side. Suit: Mercedes C, E, S, SL, M-Class, SLK, G-Wagon.
Length: 11.1/2"(292mm)
No.6266
Twin & Quad
Cam Locking Tool
No.A2123
Universal Camshaft Alignment / Locking Tool
Use sockets to lock onto camshaft central screw. Adjustable to
fit most twin camshafts. Special design aligns and locks camshaft
for removal or installation of the cylinder head guide rail pins.
TM
145
&E
OOLS
No.6276
GM Diesel Engine
Camshaft Locking Tool
No.6274
Audi / VW Camshaft Locking Tool
No.A1136
BMW Camshaft
Alignment Tool
A1019
A1021
A1033
No.A1156
BMW Camshaft
Alignment Tool
No.A1088
BMW Camshaft Alignment Tool Kit
Camshaft alignment tool kit comprises of blocks, locking plates and
pins for setting camshaft timing on BMW models M40 to M70.
Contains: A1033 Timing Blocks & Pin To suit BMW M42 & M50
A1021 Timing Blocks & Pin To suit BMW M60 & M62
A1019 Timing Plate & Pin To suit BMW M40 & M70
No.6289
Audi Cam Alignment Tool
No.6279
No.6280
8Pc. Camshaft Timing Lock Tool set
8Pc set used to retain and lock the camshaft timing when replacing
timing belt or servicing engine parts.
Set contains: #6281 thru to #6287 as listed in table below.
Individual Sizes:
Part No
6281
6282
6283
6284
6288
6285
6286
6287
146
6281
6282
6283
6284
Available Separately
Description
Timing
Timing
Timing
Timing
Timing
Timing
Timing
Timing
Locking Tool
Locking Tool
Locking Tool
Locking Tool
Locking Tool
Locking Tool
Locking Tool
Locking Tool
TM
Application
Vectra / Astra / Vauxhall
Holden / Astra / Opel
Saab / Vauxhall / Opel
Saab / Vectra / Opel
Rover / BRM / MGF
VW, Bora, Golf, Polo, Passat
Citroen / Peugeot / Fiat / Ford
Isuzu & Vauxhall diesel engines
6288
6285
6286
6287
&E
OOLS
No.J9955
Oil Pan Separator Tool
No.4943
18mm Engine Mount Crowsfoot Wrench
No.J1810
Universal Grooved
Pulley Puller Set
No.2-6492
New Engine Pre-lube Pump
Removes & Inserts Camshaft Bearings in all Engines from Compact Cars to Heavy Trucks
No.J1800
The expander has a neoprene sleeve over which the split driving plugs are mounted and
expanded to size. This tool has two sets of rubber sleeves supplied with it for each expanding
driver. The brown sleeves are used when driving thin wall bearings (.065"). The black sleeves
should be used when driving thick wall bearings (.090"). Range: 1.1/8" to 2.11/16"(28 to 68mm)
Bar Length:
28.1/2"(724mm)
Part No.
No.J1800-1
No.J1800-2
No.J1800-3
No.J1800-4
No.J1800-5
No.J1800-EXA
No.J1800-Black
No.J1800-Brown
Description
#1 Expanding Driver
#2 Expanding Driver
#3 Expanding Driver
#4 Expanding Driver
#5 Expanding Driver
Expander Unit
Black Sleeve Set
Brown Sleeve Set
Grit
180 grit
180 grit
180 grit
180 grit
180 grit
180 grit
180 grit
180 grit
180 grit
180 grit
Size Inch
2.1/2" to 2.1/4"
2.3/4" to 2.1/2"
3"
to 2.3/4"
3.1/4" to 3"
3.1/2" to 3.1/4"
3.3/4" to 3.1/2"
4"
to 3.3/4"
4.1/4" to 4"
4.1/2" to 4.1/4"
5"
to 4.1/2"
Size mm
64 to 57mm
70 to 64mm
76 to 70mm
83 to 76mm
89 to 83mm
95 to 89mm
102 to 95mm
108 to 102mm
114 to 108mm
127 to 114mm
Grit
240 grit
240 grit
240 grit
240 grit
240 grit
240 grit
240 grit
240 grit
240 grit
240 grit
Size Inch
2.1/2" to 2.1/4"
2.3/4" to 2.1/2"
3"
to 2.3/4"
3.1/4" to 3"
3.1/2" to 3.1/4"
3.3/4" to 3.1/2"
4"
to 3.3/4"
4.1/4" to 4"
4.1/2" to 4.1/4"
5"
to 4.1/2"
Size mm
64 to 57mm
70 to 64mm
76 to 70mm
83 to 76mm
89 to 83mm
95 to 89mm
102 to 95mm
108 to 102mm
114 to 108mm
127 to 114mm
147
&E
OOLS
No.5569
Distributor Adjusting Screwdriver
Extra long 3mm In-Hex screwdriver for adjusting distributors etc. on later GM and Ford vehicles.
Size: 3mm In-Hex
Length: 12"(305mm)
Opening:
7/8"(22mm)
Single hex
No.4013
Vacuum Switch Socket
7mm Slot allows socket to fit over the
connectors on vacuum switches.
Universal applications for most vehicles.
Made from heat treated alloy steel.
Drive: 3/8"Square
Size:
7/8"(22mm)
Length: 2.3/4"(70mm)
1/2"Drive
Heavy-Duty
No.4112
Oxygen Sensor & Vacuum
Switch Socket
No.2-7231
Oxygen Sensor Socket
12
No.4595
Coolant Temperature
Sensor Socket
11
10
3
13
148
TM
9
1
14
No.J4295
Injector & Sensor Switch Socket Set
Master set of fourteen 1/2"Drive injector & sensor switch sockets
that feature special cut-away in the deep wall to allow access to
remove & replace injectors without damaging fuel lines.
Set Contains fourteen specialty sockets that fit injectors on most
diesel engines including: VW, Audi, Opel, GM, BMW, Ford, Mercedes, Volvo, Rover, Seat,
Chrysler, Alfa Romeo, MAN, etc. Set is supplied in blow mold case.
Individual Sizes:
No.4094
Open-End Hexagon Socket
for Lambda Probes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Part No
4031
4032
4033
4034
4035
4036
4037
4025
4038
4039
4040
4041
4110
4109
Drive
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/8"
3/8"
Size
17mm
19mm
20mm
21mm
22mm
22mm
22mm
27mm
27mm
27mm
28mm
30mm
7/8"(22mm)
7/8"(22mm)
Available Separately
Description
12Pt. Open Side Sensor / Injector Socket
12Pt. Open Side Sensor / Injector Socket
6Pt. Open Side Sensor / Injector Socket
12Pt. Open Side Sensor / Injector Socket
12Pt. Open Side Sensor / Injector Socket
12Pt. Open Side Sensor / Injector Socket
12Pt. Open Side Sensor / Injector Socket
12Pt. Open Side Sensor / Injector Socket
12Pt. Open Side Sensor / Injector Socket
6Pt. Open Split Sensor / Injector Socket
12Pt. Open Side Sensor / Injector Socket
12Pt. Open Side Sensor / Injector Socket
Offset Oxygen Sensor Wrench
Shallow Offset Oxygen Sensor Wrench
Length
80mm
80mm
80mm
80mm
80mm
110mm
150mm
80mm
110mm
80mm
80mm
80mm
85mm
60mm
No.4017
17mm Oil Pressure
Sending Unit Wrench
No.4012
Dual Size Oil Pressure
Switch Socket
No.4113
1.3/16"(30mm) Oil Pressure
Sending Switch Socket
No.4019
1" & 1.1/16" Deep
Oil Pressure Switch Socket
No.4490
18 x 1.5mm Oxygen Sensor
Thread Chaser
Cleans threads in oxygen sensor holes.
Use with 3/4" hex socket or 3/8" square
drive.
Size: M18 x 1.5 Also works on 18mm
spark plug threads
Length: 2"(98mm)
IMPORTANT: Use anti-seize
No.4492
2Pc. Lambda Sensor
Thread Chaser
Used to repair damaged
lambda-probe mounting
threads on the manifold
when exchanging the
lambda-probe.
Includes:
&E
OOLS
No.4110
Offset Oxygen Sensor Wrench
l
No.4109
3/8"Drive Short
Oxygen Sensor Wrench
This wrench has been designed for
use with most all oxygen sensors no
matter what size electrical
connectors they have.
Easily removes the oxygen sensor
located in the exhaust manifold.
Size: 7/8"(22mm) Single Hex
Length: 2.1/8"(54mm)
No.B1145
Forged Oxygen
Sensor Socket
22mm
Double Hex
8 Point
3/8"Drive
149
&E
ENGINE SERVICE - OIL PUMP & TIMING HOLDING TOOLS
OOLS
IMPORTANT: Use anti-seize
B
F
D
G
No.J4298
Injector / Sensor Switch Socket Set
Injector & Sensor sockets: D) #4019 1 & 1.1/16" Oil Switch Skt
A) #4042 29mm Sensor Skt, E) #4013 22mm Sensor Skt
B) #4112 22mm Vacuum Skt, F) #4110 7/8" Offset Sensor Skt
C) #4038 27mm Injector Skt, G) #4109 7/8" Offset Sensor Skt
No.4920
3Pc. Oil Pump Primer Set
Oil pump primers protect new and rebuilt engines from premature
wear caused by a dry start. Set includes #4923, GM V6 and V8
engines. #4921 1/4"Hex, #4922 5/16"Hex Ford oil pump primers.
Lengths: 9.3/4"(248mm)
No.4949A
BMW Visco-Fan Reaction Wrench
Used to provide a reaction point to dismantle Visco-Coupled
cooling fan on BMW 4-cylinder and 6-cylinder diesel engines.
Hole Distance: 1.3/4"(44mm)
Length: 16"(406mm)
No.4949B
BMW Visco-Fan Reaction Wrench
Used to provide a reaction point to dismantle Visco-Coupled
cooling fan on BMW 4-cylinder and 6-cylinder diesel engines.
Hole Distance: 1.1/2"(38mm)
Length: 16"(406mm)
No.4922
Ford Oil Pump Primer 5/16"Hex
No.4921
Ford Oil Pump Primer 1/4"Hex
150
TM
No.4959
Oil Pump Screen Installer
No.4926
Timing Adjustment Holding Tool
No.4927
Timing Adjustment Holding Tool
No.2-1805
2000lb Load-Rotor Positioning Sling
Engines, transmission, etc. can be leveled whilst
lifting by turning the 5/8" hex drive end with a
socket or wrench. Forged swivel hooks at each
end with brackets.
Capacity: 2000lb(900kg)
Chain: 1/4" Diameter
Length: 56.1/2"(2.2m)
No.2-1806
4000lb Load-Rotor Positioning Sling
&E
OOLS
No.4340
Engine Lifting Chain
l
No.B7100
Engine Lifting Brackets
This pair of lifting brackets with 1/2"(13mm)
holes, bolt directly to the component for
easy lifting. The large chain links make
hook-up a simple and secure operation.
Hole Diameter: 1/2"(13mm)
Lifting Capacity: 4000lb(1800kg)
No.4300
Heavy-Duty
Adjustable Sling
For lifting and positioning engines,
transmissions, etc. Each chain
can be adjusted independently
for length. plate design enables
chain to be "short-hooked"
for correct tilt. Heavy duty
safety hooks are fitted to
both ends.
Capacity: 4000lb(1785kg)
Chain: 5/16"(8mm) Diameter Length: 65"(1.6m)
No.ES1500
1500lb Engine Stand
Overhaul and repair of engines can be
performed with speed when the unit is
conveniently held and positioned at work
bench height. An engine can be rotated a
full 360 with an easy turn of the handle.
Locking pin secures work at different positions.
Smooth rolling wheels and swivel
casters provide ease of mobility.
Capacity: 1,500lb(680kg)
Suitable for Passenger Car
& Light Commercial Truck Engines
Weight: 44.5kg
TM
No.EH2202A
Transverse Engine Support Bar
No.A1117
Gear Type Universal K/D Rack
151
&E
OOLS
Consists of two extra slim wrenches and holding device for removal and replacement of the viscous fan clutch
assembly on Ford Falcon, Fairlane, etc. Suits both 6 & 8 cylinder engines. Elongated slots in holding bar hold
firmly on three stud heads. The 32 x 36mm wrenches are offset to give knuckle clearance.
Short Handle Wrenches Offset
Clutch Assembly
No.4938-S
Ford Fan Clutch Tool Set
No.4938-L
Ford Fan Clutch Tool Set
No.4938-1
Ford Viscous Fan Wrench Set Offset
No.4938-3
Ford Viscous Fan Wrench Set Long
Contains: 32mm and 36mm Offset wrenches. Universal holding tool. Contains: 32mmand 36mm Straight wrenches. Universal holding tool.
Length: Wrenches 11"(280mm)
Holding Tool: 17.3/4"(450mm)
Length: Wrenches 15.1/4"(385mm) Holding Tool: 17.3/4"(450mm)
Lengths: 11"(280mm)
No.J2090
U.S. Ford Viscous Fan Wrench & Holder
No.4938-2
Ford Viscous Fan Holding Bar
No.4939
Fan V-Belt Tension Gauge
No.4937
Fan V-Belt Installer & Remover
l Safe, Fast & Convenient
Keeps hands away from moving parts. Steel and neoprene
tool derails and installs V-belts quickly and safely. Eliminates
loosening bolts or stretching belts. Designed for use with #3554
Remote Starter Switch for maximum safety. Length: 3.1/2"(89mm)
No.4940
This Serpentine Belt Wrench Kit is designed to release the tension on spring
loaded idler pulleys. These tools allow direct access to the tensioner without
having to remove engine accessories or frame components. Ratcheting wheel
allows quick and easy positioning of the wrench driving end to allow the user to
access the tensioner from any angle. The universal two wrench kit will service
90% of all vehicles with spring loaded tensioner pulleys.
Set contains:
No.4941
No.4942
No.4945
This time saving tool gives the technician the control and reach when installing serpentine belts in all applications.
The tool was also designed to help install V-belts and timing belts that tend to be placed in areas that are difficult
to reach. The two pin design gives the technician convenient belt push/pull capability and the handle gives the
technician the twisting control to install belts in difficult areas.
Length: 24"(610mm)
152
TM
No.J4105
&E
OOLS
This set provides the required leverage and clearance to release spring tension on the tensioner pulley to remove & replace almost
inaccessible serpentine belts.
Set Includes: One: Long Handle 18"(460mm), Two: Handle Extensions 4"(100mm), 6"(150mm), Two Square Drive Adaptors: 3/8" & 1/2"
Three Crowsfoot Wrenches: 13, 14, 15mm, Five Shallow Sockets: 13, 14, 15, 16, 18mm
One: 3/8" x 16UNC Fixing Bolt
No.91210
Nissan / Mercedes / Mercury Fan Belt Wrench
Special hex-key wrench with 1/2"drive adaptor, used for loosening
the quest air conditioner idler pulley tensioner lock-nut for A/C belt
adjustment or replacement.
Length: 19"(485mm)
No.A1022B
BMW Viscous Fan Pulley Holder
Dual size holding tool used to provide a reaction point to
dismantle Visco-Coupled cooling fan on BMW 4-cylinder and
6-cylinder diesel engines.
Hardness: HRC 40- 45
Length: 15.3/4"(400mm)
65mm Opening
No.J6263
Mercedes Benz Viscous Fan Hub Wrench
Special 65mm open end wrench used for the removal and
replacement of the radiator fan hub on Mercedes Benz engines.
Suits: M103 - 6 cylinder,
M104 - 6 cylinder 24 valve
M119 - 8 cylinder 32 valve M120 - 12 cylinder 48 valve
Length: 15.3/4"(400mm)
No.4946
BMW / Ford / Opel
Viscous Fan Holding Tool
Essential tool to prevent fan hub from rotating
when removing retaining nut. Unique swivel locking head for
universal applications.
Suits: BMW 316, 520, 525, 530, 730 & 735 Ford: Capri, Sierra,
Granada, Vauxhall, Opel, Carlton, Manta, Senator
Length: 16"(406mm)
No.J4262
Mercedes Benz Viscous Fan Reaction Wrench
Required to remove the radiator fan hub. The reaction wrench is
bolted to the front face of the hub. Use when the pulley V belt is
not in place and cannot be used to lock the hub.
Hole Diameter: 11.7mm Length: 15.3/4"(400mm)
No.J4938
GM Fan Clutch Wrench
This specially designed tool is used to loosen and tighten the fan
clutch on 1996 and later GM trucks and vans. The unique design
works with both 10mm & 13mm pulley bolt heads. The tool enables
the mechanic excellent control to hold the water pump pulley
stationary while using an open end wrench to loosen the fan clutch.
Length: 16"(406mm)
No.4938-5
2 Way Viscous Fan Wrench
For removal of Thermo-Viscous fans on BMW, Ford, Opel,
Mercedes. Sizes: 32mm & 36mm
Length: 13" (330mm)
TM
No.2-6068
Ford Diesel Fan Clutch Wrench
No.J4263
Mercedes Benz
Viscous Fan Reaction Bar
This tool allows the removal and replacement of the viscous
coupling on the cooling fan fitted to Mercedes Benz engines.
Length: 11.1/4"(285mm)
No.4933
Bussab Quest Fan Belt Service Wrench
Special designed wrench for adjusting the fan belt on Nissan,
Bussab Quest.
Length: 9.3/4"(248mm)
153
&E
OOLS
No.4934
10Pc. Viscous Fan
Clutch Wrench Set
Set includes five wrenches and five
holding tools to give a broad
coverage of GM, Ford, Chrysler
and other vehicles that use a fan
clutch. Wrenches will reach into
confined quarters to get the job
done heat treated to withstand high
toque needed to remover fan
clutches.
1/2" square drive enables use of
breaker bar to apply extra torque.
No.J7017
Fan Belt Tightening Tool
Wrench Sizes:
No.J6265
Mercedes & BMW
Fan Service Wrench Kit
No.7522
V-Belt Pulley Holding Tool
Ideal for removing and installing any type of groove pulley.
Adjustable notch V type belt, securely holds pulley from rotating
whilst undoing fasteners.
Maximum Capacity: 8"(200mm) Diameter
Length: 20"(508mm)
No.J4266
Reaction Wrench VW, Golf, Passat, Audi
Reaction wrench is used to lock the pulley on the water-pump on
VW Polo, Golf, Passat & Audi 80/A4. 1/2" Drive in the tools handle
enables further extension to be used.
Length: 10"(255mm)
154
TM
No.4939-A
Fan V-Belt Tension Gauge
Designed for tensioning drive belts on
passenger cars, light and heavy trucks.
Correct tension levels are important in
maintaining belt life and performance.
Easy to use, just hold against the back
of belt and click.
Instructions included with product.
Length: 4.5/8"(117mm)
No.4939-B
Fan V-Belt Tension Gauge ( for Notched Belts )
No.J4265
Reaction Wrench VW, Audi
Reaction wrench is used for locking of deep-drawn water-pump
pulleys on VW and Audi engines, as used when air conditioning
is also built in.
Diameter: 2.1/2"(65mm)
Length: 12"(305mm)
&E
OOLS
No.7715
Exhaust Doughnut Removing Pliers
Removes exhaust systems from rubber style hangers on tailpipes,
intermediate pipes and mufflers. Features self-locating forcing pin,
and "cushioned", slip-resistant handles at 25 degree offset for
easy access in restricted areas. Length: 11"(280mm)
Adjustable Three Rollers for Service on
Both Large & Small Diameter
Exhaust & Tail Pipes
No.7718
Exhaust Doughnut Hook Puller Set
Removes and replaces rubber ring style hangers used on late
model cars. Simply hook tool through rubber mounting ring and
stretch until released from hook on muffler, pipe or frame.
Reverse procedure for installation. Length: 8.3/4"(220mm)
No.7702
Exhaust Tailpipe Reshaper
Reshapes damaged exhaust pipe ends in seconds, remove
clamp grooves, round out crushed or bent pipes to assure a
tight fit eliminating exhaust leaks. Three expanding rollers makes
this frustrating job easy requiring only a 70 degree turning circle
to remove grooves and restore the exhaust tailpipe shape.
Capacity: 1.5/8" to 3.1/16"(41 to 78mm) Length: 10.1/2"(266mm)
No.7719
Exhaust Spring Clamp Remover / Installer
Essential for safe, controlled removal of clamps attaching exhaust
to manifold. Special design provides leverage required to expand
the strong spring steel clamps.
Length: 6"(150mm)
Application: VW, Audi
No.WH707B
Exhaust Fume Extractor
Air operated exhaust fume extractor is designed to
operate in any workshop and is ideal alternative to
fixed, space consuming, expensive systems.
Suitable for use on cars, vans, motorcycles, and
light commercials, it allows the garage mechanic
to work on the vehicle with the engine running,
without causing pollution of the air or contravening
the current workshop regulations. Height and
elevation is fully adjustable. Mounded on robust
metal stand with adjustable suction settings.
Working pressure: 5 to 8 bar
Dimensions: 250mm x 280mm x 1230mm
Weight: 9.14kg
No.7699
E / Zee Pull Exhaust Pipe Separator
Simple and easy way to separate fused and previously clamped
exhaust pipes and mufflers. The separating bolts have 1/2"Drive
socket ends that will separate the two holding clamps easing the
pipes apart from each other.
Size: 2" to 2.1/4"(50mm to 58mm)
TM
Optional Accessories:
155
&E
OOLS
7389
4390
4390
15psi Pressure Gauge for use with #7389 Back Pressure Test
Adaptor Set. Indludes hose and connector fitting.
72408
4438
72408
4438
4439
4439
Insert between tailpipe and muffler joint, and split open which
ever is outside. Rusted and corroded connections are no
problem. The handle keeps your hands away from the hammer.
Drop forged alloy steel.
Length: 8"(200mm)
4947
7712
7712
7717
7717
156
TM
&E
OOLS
J2001
a
J2002
J2003
J2001
J2002
J2003
7703
7703
7704
7705
7704
7705
7707
7708
7700
7701
7700
7722
7722-C
TM
157
&E
OOLS
Standard-Duty
No.4297
Strap Type Oil Filter Wrench
The rugged nylon strap can handle any filter up to
6"(150mm) diameter. The more leverage applied the
tighter it grips. Handle can be turned with 1/2" drive bar
or 3/4"(19mm) open end wrench.
Capacity: 0 to 6"(0 to 150mm)
Length: 6"(150mm)
No.4299
Strap Type Oil Filter Wrench
Heavy-duty "Cordura" strap for high torque requirements.
Features double ended forged body with 3/8"drive & 1/2"drive ends.
Handles extra large size filters.
Capacity: 0 to 12"(0 to 300mm)
Length: 4"(100mm)
No.4278
Standard Spider Filter Wrench
l
l
No.4273
Filter Wrench Small Cup Type
No.4279
Spider Filter Wrench
Works both left & right hand
Reversible style enables removal
or installation of filters in hard to
reach places.
Features huge size range. For use when
access to filter is only from the end.
Three positive legs adjust to grip filter firmly.
Drive Size: 3/8"Sq. (1/2"Dr. adaptor included)
Capacity: 2.1/2" to 4.3/4"(65 to 120mm)
l
No.4274
Filter Wrench Medium Cup Type
No.4276
Small Spider Filter Wrench
No.4277
Large Spider Filter Wrench
No.J4300
Chain Type Strap Wrench
Features huge size range.
Heavy-duty chain enables ratcheting
action making it possible to re-grip
without removal from filter.
Also will handle all shapes, round,
square, hexagon, octagon etc.
Capacity: 5/8" to 5"(16 to 125mm)
Length: 3.3/4"(95mm)
158
TM
No.A2094
Two Way Oil Filter Wrench
Heavy duty forged steel two way oil
filter wrench with serrated jaws to grip
the filter securely. Spring loaded cam
action reverses the drive direction
for either removal or replacement.
For use when access to filter is only
from the end.
Drive Size: 3/8"Square
Capacity: 2.3/8" to 3.1/8"(60 to 80mm)
&E
OOLS
No.4252
Extra Small Swivel Filter Wrench
No.4251
Small Swivel Filter Wrench
No.4255
Large Swivel Filter Wrench
No.4253
Standard Swivel Filter Wrench
Three Position
Adjustment
No.4283
No.4283-10
Length: 12"(300mm)
Length: 10"(250mm)
Five Position
Groove Joint
159
&E
OOLS
Suits "Ryco"
Octagonal
End Cap Filters
No.4286
Strap Type Truck Filter Wrench
No.4301B
Heavy Duty
Oil Filter Wrench
No.4285
Locking Grip Oil Filter Pliers
No.4298
5Pc. Oil Filter Wrench Set
Made from alloy steel, wrench can with-stand up to 85ft/lb.
of torque. The fluted cup style grips firmly on the flutes
eliminating crushing of the filter. Five cup style 3/8" Drive
wrenches to suit Mazda, Nissan, Toyota etc.
a
Set Contains:
Part No.
HC7630
HC75614A
HC9315
Available Separately
Diameter
76mm
75.6mm
93mm
Flutes
30
14
15
Description
Part No.
Mazda, Nissan, Toyota etc. HC6514
Mazda, Nissan, Toyota etc. HC7614
Mazda, Nissan, Toyota etc.
4280
4281
4282
(125 to 145mm)
4280W
4281W
4282W
160
TM
(125 to 145mm)
&E
OOLS
Available Separately
Drive
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
-
Vehicle
Mercedes
Mercedes, GM
Mercedes, VW, Cooper S
New Mercedes
New Mercedes
Volvo
Honda, Opel, Ducato, Renault
Volvo, VW, Audi, Nissan, Porsche
21mm Offset Wrench Handle
No.4307
9Pc. Truck Oil Filter Wrench Set
Made from alloy steel, wrench can with-stand up to 85ft/lbs of torque. The fluted cup
style grips firmly on the flutes eliminating crushing of the filter. Seven cup type
wrenches to suit truck applications, adjustable strap type wrench, plus 21mm offset
wrench.
Set Contains:
Available Separately
Flutes
6 Flutes
14 Flutes
15 Flutes
15 Flutes
15 Flutes
18 Flutes
18 Flutes
-
Drive
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
-
Vehicle
Mercedes, Scania
Mercedes, VW
Man, Scania, Iveco
Volvo, Iveco, Renault, Scania
Volvo, Iveco, Renault, Scania
Renault Transporter
Man Trucks
Universal Strap Wrench
21mm Offset Wrench Handle
No.4303
7Pc. Oil Filter Wrench Set
Pressed from Chrome Vanadium steel, wrench can with-stand up to 85ft/lbs of torque
The 6 point shallow shape enables the sockets to fit into confined areas. Six pressed
sockets to suit later European applications. Includes 1/2" x 3/8" reducing adaptor.
Set Contains:
Part No.
HC2406
HC2706A
HC3006
HC3206A
HC3606A
HC3806
Available Separately
Diameter
24mm
27mm
30mm
32mm
36mm
38mm
Opening
6 Point
6 Point
6 Point
6 Point
6 Point
6 Point
Drive
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
Vehicle
GM Cadillac, BMW
Mercedes, A Class
5.9 L. Cummins fuel filter
Vauxhall / Opel Vectra
Ford Diesel, Mercedes
Vauxhall / Opel Vectra
Includes:
No.24803 1/2" Female x 3/8" Male Reducing Adaptor
No.4298B
5Pc. Oil Filter Wrench Set
Forged from Chrome vanadium steel, wrench can with-stand up to 85ft/lbs of torque
The 6 point shallow shape enables the sockets to fit into confined areas.
Five forged sockets to suit later European applications.
Set Contains:
Part No.
4221
4223
4225
4226
4227
TM
Available Separately
Diameter
24mm
27mm
32mm
36mm
38mm
Opening
6 Point
6 Point
6 Point
6 Point
6 Point
Drive
3/8"
3/8"
3/8"
3/8"
3/8"
Vehicle
GM Cadillac, BMW
Mercedes, A Class
Vauxhall / Opel Vectra
Ford Diesel, Mercedes
Vauxhall / Opel Vectra
161
&E
OOLS
No.5200
Mitsubishi Canter Oil Filter Wrench
101mm Diameter with 15 Flutes Oil Filter Wrench designed for removal and replacement
of oil filters fitted on Mitsubishi Canter engines.
Made from heat treated steel with fully welded construction.
Drive Size: 1/2"Square
Opening: 101mm x 15 Flutes
No.4294
16Pc. Cup Style Oil Filter Wrench Set
Fourteen wrenches to fit the following eighteen sizes, plus 1/2" x 3/8" Adaptor.
Set Contains:
Part No.
HC6606
HC7608
HC7612
HC7476
Stepped
HC7614
HC8616
HC8618
HC9210
Available Separately
Diameter
66mm
76mm
76mm
74mm
76mm
76mm
86mm
86mm
92mm
Flutes
6
8
12
15
15
14
16
18
10
Part No.
Diameter Flutes
HC9315
93mm
15
HC9345
93mm
45
HC9618
96mm
18
HC10615
106mm
15
HC10815
108mm
15
HC10818
108mm
18
4278 3 Leg Spider Filter Wrench
24803 1/2" x 3/8" Adaptor
No.4295
15Pc. Cup Style Oil Filter Wrench Set
Fourteen wrenches to fit the following eighteen sizes, plus 1/2" x 3/8" Adaptor.
Set Contains:
Part No.
HC6514
HC6814
HC7314
HC7476
Stepped
HC7614
HC8015
HC9315
HC9336
Available Separately
Diameter
65mm
68mm
73mm
74mm
76mm
76mm
80mm
93mm
93mm
Flutes
14
14
14
15
15
14
15
15
36
Part No.
HC6567
Stepped
HC8082
Stepped
HC9015
HC7577
Stepped
HC7630
HC10015
Diameter
65mm
67mm
80mm
82mm
90mm
75mm
77mm
76mm
100mm
Flutes
14
14
15
15
15
15
15
30
15
No.4296
30Pc. Cup Style Oil Filter Wrench Set
Set contains 28 cup style oil filter wrenches, spider adjustable filter wrench
plus 1/2"Drive x 3/8"Drive Male Adaptor.
Set Contains:
Part No.
HC7815
HC6567
HC6514
HC6814
HC7415
HC6606
HC7608
HC7314
HC7476
HC7577
HC7612
HC7630
HC9336
HC7614
162
Available Separately
Flutes
Diameter
15
78mm
65mm, 67mm 14
14
65mm
14
68mm
15
74mm
6
66mm
8
76mm
14
73mm
74mm, 76mm 15
75mm, 77mm 15
12
76mm
30
76mm
36
93mm
14
76mm
TM
Part No.
HC10815
HC10818
HC10615
HC10015
HC8616
HC9015
HC8082
HC9210
HC9345
HC9315
HC8618
HC8015
HC9615
HC9515
Diameter
Flutes
108mm
15
108mm
18
106mm
15
100mm
15
86mm
16
90mm
15
80mm, 82mm 15
92mm
10
93mm
45
93mm
15
86mm
18
80mm
15
96mm
15
95mm
15
&E
OOLS
Part No.
HC2406
HC2706A
HC3006
HC3206A
HC3606A
HC3606B
HC3806
HC6414
HC6514
HC6567
HC65714
HC6606
HC66514
HC6814
HC7314
HC7415
HC7476
HC7577
HC75614A
HC7612
HC7612A
HC7608
HC7614
HC7614B
HC7630
HC76514
HC7815
HC8015
HC8082
HC8414
HC8618
HC8616
HC8616A
HC88515
HC9015
HC9210
HC9345
HC9315
HC9315A
HC9336
HC9515
HC9618
HC9915
HC10015
HC10615B
HC10715B
HC10815B
HC10818B
HC13518B
Available Separately
Diameter
24mm
27mm
30mm
32mm
36mm
36mm
38mm
64mm
65mm
65 & 67mm
65.7mm
66mm
66.5mm
68mm
73mm
74mm
74 & 76mm
75 & 77mm
75.6mm
76mm
76mm
76mm
76mm
76mm
76mm
76.5mm
78mm
80mm
80 & 82mm
84mm
86mm
86mm
86mm
88.5mm
90mm
92mm
93mm
93mm
93mm
93mm
95mm
96mm
99mm
100mm
106mm
107mm
108mm
108mm
135mm
Flutes
6 Flutes
6 Flutes
6 Flutes
6 Flutes
6 Flutes
6 Flutes
6 Flutes
14 Flutes
14 Flutes
14 Flutes
14 Flutes
6 Flutes
14 Flutes
14 Flutes
14 Flutes
15 Flutes
15 Flutes
15 Flutes
14 Flutes
12 Flutes
12 Flutes
8 Flutes
14 Flutes
14 Flutes
30 Flutes
14 Flutes
15 Flutes
15 Flutes
15 Flutes
14 Flutes
18 Flutes
16 Flutes
16 Flutes
15 Flutes
15 Flutes
10 Flutes
45 Flutes
15 Flutes
15 Flutes
36 Flutes
15 Flutes
18 Flutes
15 Flutes
15 Flutes
15 Flutes
15 Flutes
15 Flutes
18 Flutes
18 Flutes
Description
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench, Hex Adaptor
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench, Hex Adaptor
3/8"Drive Cup Style Oil Filter Wrench, Hex Adaptor
1/2"Drive Cup Style Oil Filter Wrench, Hex Adaptor
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Dual Size Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench, Hex Adaptor
3/8"Drive Dual Size Oil Filter Wrench
3/8"Drive Dual Size Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench, Hex Adaptor
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench, Hex Adaptor
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
1/2"Drive Cup Style Oil Filter Wrench, Hex Adaptor
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Dual Size Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench, Hex Adaptor
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench, Hex Adaptor
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
3/8"Drive Cup Style Oil Filter Wrench
1/2"Drive Cup Style Oil Filter Wrench, Hex Adaptor
1/2"Drive Cup Style Oil Filter Wrench, Hex Adaptor
1/2"Drive Cup Style Oil Filter Wrench, Hex Adaptor
1/2"Drive Cup Style Oil Filter Wrench
1/2"Drive Cup Style Oil Filter Wrench, Hex Adaptor
No.WH312A
Car & Truck Oil Filter Crusher
AFTER
BEFORE
TO&E
OLS
The Professional
Advantage q q q
Heavy-Duty Oil
Filter Crusher
WH312A
This heavy- duty pneumatically operated heavy vehicle oil filter crusher will handle filters up to 11"(280mm) in height and 5.1/2"(140mm)
diameter. The filters are reduced to only 20% of their original size and after pre-draining, 95% of the residual oil is removed.
Automatic cycle operation: Simply load the filter, push the button and walk away. A shield protects the operator and a security switch
prevents operation if shield is in the open position. Unique safety door ensures that the filter crusher will not operate unless the door is
completely closed. Use waste oil drum under stand. Power: Compressed Air 100 to 120psi
Dimensions: 320mm x 330mm x 770mm
TM
163
&E
OOLS
No.RT-919A
Radiator Tank Pressure Test Set
No.RT-919C
Deluxe Radiator Tank Pressure Test Set
D
D D
A
A
No.RT-919J
Radiator Cap
Pressure Tester
No.RT-919F
Truck Radiator Pressure Test Set
The kit comes with four tapered adaptors that can quickly expand
to make the correct seal on truck radiator necks. The range
provides coverage for most Japanese, American & European
trucks, tractors, farm equipment etc. Quick release couplers make
pump hook up an easy operation. Hand pump is constructed from
high impact, stronger than steel polymer to prevent against glycol
corrosion. Gauge Pressure: 35psi Gauge Dia.: 1.7/8"(48mm)
Set Contains:
A
B
C
D
No.RT919-81
No.RT919-82
No.RT919-83
No.RT919-84
Available Separately
Range: 16mm to 35mm
Range: 25mm to 40mm
Range: 35mm to 50mm
Range: 45mm to 60mm
No.RT919-T1
Automatic
Air Inlet Pump
164
TM
No.RT919-P1
Hand Pump
B
C
D
E
F
G
H
I
Set Contains:
A
Available Separately
No.RT-919G
Replacement Gauge
1.7/8"(48mm) Diameter
35psi Pressure Gauge
No.RT1001
Replacement
Female Coupler
*
*
*
*
*
*
No.RT919-02
No.RT919-03
No.RT919-04
Radiator Tank Adaptor Radiator Tank Adaptor Radiator Tank Adaptor
&E
OOLS
*
*
No.RT919-05
Radiator Tank Adaptor
*
*
No.RT919-06
Radiator Tank Adaptor
Suits: Volvo, Citroen, Renault,
*
*
No.RT919-07
Radiator Tank Adaptor
Peugeot.
*
*
*
*
No.RT919-08
No.RT919-09
Bridge for Adjustable
50mm Adjustable Seat
Seats
Adjustable bridge clamp for use
with 27mm, 35mm, 50mm
adjustable seats.
*
*
*
*
*
*
No.RT919-10
No.RT919-11
35mm Adjustable Seat 27mm Adjustable Seat
Use with #RT919-08 Adjustable
Bridge for all necks from 35mm
diameter and up.
*
*
No.RT919-12
31mm Tank Adaptor
Suits: Toyota, Lexus and many
No.RT919-13
32mm Tank Adaptor
Suits: Toyota, Subaru, Nissan,
*
No.RT919-44
Small Radiator
Neck Bracket
No.RT919-19
No.RT919-20
No.RT919-40
Radiator Tank Adaptor Radiator Tank Adaptor
Radiator Tank Adaptor
(Black) Mercedes Benz
(Green) Ford
*
*
Suits: Ford.
Thread Size: 51 x 3mm
*
*
No.RT919-41
No.RT919-43
Radiator Tank Adaptor Radiator Tank Adaptor
Suits: Toyota, Lexus, Honda and
TM
No.RT919-45
Radiator Tank Adaptor
Suits: Standard bayonet style
filler necks.
Tank Size: 1.5/8"dia.
No.RT919-60
Radiator Tank Adaptor
Suits: Mercedes Benz etc.
Tank Thread Size: 62 x 4mm Ext.
165
&E
OOLS
Includes 12 Adaptors
No.G02 to No.G13
Shown on Page No.167
Except No.G06-F
No.GO6-F BA Falcon
Adaptor is Available
as an Optional Extra
No.GT3
Radiator Pressure Tester
No.GT1
Deluxe Radiator Pressure Tester Set
Expands From
1.1/16" to 2"(27 to 50mm)
No.GT4
Radiator Expanding Adaptor
No.GT5
Universal Radiator Pressure Tester Set
This new set is made from composite nylon material and offers the
most comprehensive range of adaptors at an economical price.
No.GT7
Universal 5/16",3/8"
In line Radiator
Adaptor Set
This in line adaptor enables you to
connect your radiator tester directly
in line to the tank reservoir.
Use when the correct adaptor
is not available.
166
TM
No.GT4BUSH
Length:
Hand Pump: 9.1/4"(235mm)
Diameter:
Gauge:
3"(76mm)
No.GTH
No.GTG
Hose: 24"(610mm)
No.G02
Truck Bayonet
Tank Adaptor
Fits all popular trucks with large
2.11/16" diameter "B" size filler
neck.
No.G03
Standard Bayonet
Tank Adaptor
For use to check 3/4"deep
standard bayonet filler neck.
No.G04
Small Diameter
Tank Adaptor
No.G05
Extra Small Diameter
Tank Adaptor
No.G07 (Alloy)
No.G06 (Alloy)
No.G06-F (Alloy)
No.G07N (Nylon)
No.G06N (Nylon)
Threaded Tank Adaptor Ford BA Tank Adaptor Threaded Tank Adaptor
Suits: Commodore, Camira, Opel, Suits: Ford BA to current models: Suits: Alfa Romeo, Audi, Citroen,
&E
OOLS
No.G08 (Alloy)
No.G08N (Nylon)
Threaded Tank Adaptor
Falcon, Fairmont, Fairlane, LTD. Fiat, Jeep,Peugeot, Renault, Saab Suits: Volkswagen 1992 to current
Volvo etc. Size: 45 x 3mm Thread Size: 57 x 3mm Male Thread
Size: 52 x 2.5mm
No.G12 (Alloy)
No.G09 (Alloy)
No.G10 (Alloy)
No.G11 (Alloy)
No.G12N (Nylon)
No.G09N (Nylon)
No.G10N (Nylon)
No.G11N (Nylon)
Threaded Tank Adaptor
Threaded Tank Adaptor Threaded Tank Adaptor Threaded Tank Adaptor Suits: Ford, International, GM &
Suits: BMW, Volkswagen etc.
Size: 63 x 3mm Male Thread
Rover.
Size: 53 x 3mm Female Thread
No.G13 (Alloy)
No.G02A (Nylon)
No.G13N (Nylon)
No.G14 (Nylon)
No.G15 (Nylon)
32x16mm Cap Adaptor
Threaded Tank Adaptor Threaded Tank Adaptor Threaded Tank Adaptor Suits: 32mm diameter x 16mm
Suits: Mercedes Benz etc.
Size: 62 x 4mm Female Thread
Suits: Ford
Size: 53 x 3mm Female Thread
No.G02B (Nylon)
31x10mm Cap Adaptor
No.GTW
Adaptor Wrench
Suits: Mazda
Size: 50 x 2.5mm Female Thread
No.GTR
Replacement Seals
No.4103
Large Radiator
Temperature Gauge
167
&E
OOLS
12552
Set No.12270
12450
12453
12453
Set No.12450
a
12015
12016
12552
12017
12015
12018
12019
12016
12017
12018
12021
12023
Includes both cap and radiator neck adaptors and one 7/8"
rubber plug (#12451). Fits all popular trucks with large
2.11/16"diameter "B" size filler neck.
Includes #12452 rubber gasket and the truck "B" size filler neck
adaptor. Part of #12450 kit.
Size: 32 x 16mm
caps. Toyota, Subaru, Nissan, Mitsubishi & Honda.
Size: 52 x 3mm
12019
12021
12023
12024
12025
Size: 31 x 10mm
Toyota, Lexus & many late model Asian vehicles.
12024
12025
12026
12026
12027
Size: 52 x 2.5mm
12028
12028
12027
168
TM
12030
12030
Size: 57 x 3mm
Size: 53 x 4mm
&E
OOLS
12559
12559
12452
12451
12451
12553
12555
12556
12702
a
a
12703
12701
12031
12553
12556
12702
12704
12555
12703
12704
12701
12031
KO43
KO41
KO50
RT-919K Set
Set Contains:
KO43
KO41
KO50
Available Separately
Filling Process
RT-919K1 Set
Prevents
Air Locks &
Overheating!
Filling Process
12275
Coolant Refilling
169
&E
OOLS
No.4101
Universal Automotive Thermometer
Simply check radiator temperature with this 1"(25mm) diameter
stainless steel constructed gauge. Also used on all automotive air
conditioning systems. Comes with handy pocket storage case.
Gauge Diameter: 1"(25mm) Range: 0 to 220F(-18 to 110C)
Length: 5"(125mm)
No.4103
Large Radiator
Temperature Gauge
Simply check radiator temperature with this
large diameter stainless steel constructed gauge.
Also used on all automotive air conditioning systems.
Comes with handy pocket storage case.
Gauge Diameter: 1.3/4"(45mm) Range: 0 to 220F(-18 to 110C)
Length: 5"(125mm)
No.4356
Radiator Back Flusher
Pressurised air and water cleans cooling systems and heater cores
without disassembly. No need to use caustic solutions. The radiator
pressure cap remains in place to prevent over boosting. Saves
costly replacement of the most stubbornly clogged heater cores.
Corrosion resistant aluminium construction. Length: 5"(127mm)
No.7566
Radiator Hose Tool
Speed up the removal and installation of radiator hoses. Just place
the #7566 between the hose and connector to start hose into place.
Made from hardened forged alloy steel.
Length: 7.1/4"(185mm)
No.5727
Radiator Hose Clamp Socket
Suits thumb screw aircraft type hose clamps.
Features two different size slots in end.
Fits over thumb screws on hose clamps for tightening
or loosening. Made from alloy steel & chrome plated.
Drive Size: 1/4"Square
US Federal Stock No.: 5120-00-542-4751
Length: 1"(25mm)
No.4093
Digital Temperature Thermometer
Large LCD display, measures a wide range of temperature. On / Off,
auto power off, C / F conversion, stainless steel spindle with steel
clip for holding the thermometer when measuring hot object.
Range: -40 to 200C (-40 to 392F) Accuracy: +- 1C
No.5724
Heater Hose Disconnect Tool
Removes heater hoses with 5/8" and 3/4" quick disconnect
couplings from rear heater core on 1987 to current
Dodge Caravan and Chrysler Voyager vans. Also gets into difficult
access areas next to firewall on 1986 to current Ford Aerostar vans.
Length: 20"(500mm)
No.4105
Universal Radiator
Petcock Socket
Used to open and close
petcocks used in radiators,
engine blocks, liquid storage tanks, etc. Can be used with 1/4"drive
ratchet or 7/8"wrench. O-ring holds socket or wrench in place, allows
one hand operation for use in confined areas. Prevents damage to
ears on petcock. Two slot design allows for use on all types of
petcocks. Length: 1.1/4"(32mm) Slot Openings: 10mm & 5mm
No.4235
Radiator Service Tool Set
No.4239
Radiator Cap Wrench Pliers
TM
Available Separately
170
&E
OOLS
No.4256
10"(250mm) Hose Pinch-Off Pliers
No.4254
8"(200mm) Hose Pinch-Off Pliers
No.4258
12"(300mm) Hose Pinch-Off Pliers
No.2-4510
3Pc. Hose Pinch-Off Plier Set
No.4236
Radiator Hose Shark Tooth Pliers
Remove or install radiator and heater hoses.
Grips hoses securely and provides leverage to twist and remove
or install the hose. Slip joint opening four large size radiator hoses.
Length: 11.1/2"(290mm)
No.4250
10" Radiator Hose Pinch-Off Pliers
Eliminates the need to drain radiator or engine block when
servicing cooling system components, therefore saving expensive
glycol based inhibitors. Pliers squeeze hoses shut,
jaws swivel for parallel clamping, automatic locking ratchet.
Jaw Length: 2.1/2"(65mm)
Opening: 1.1/8"(28mm)
No.4102
Anti-Freeze Coolant Tester
Sixth Ball Shows Over Protection
Features Rugged Safety Shield
The #4102 is a professional bead-type
glycol specific gravity tester. Fast and easy
to use, number of floating beads measures
degree of protection. Temperature
compensating for testing with engine hot or
cold. Accurate to -34F (-37C)
Complete with vinyl pocket protector case
imprinted with instructions & specifications.
No.4259
12" Radiator Hose Pinch-Off Pliers
Eliminates the need to drain radiator or engine block when
servicing cooling system components, therefore saving
expensive glycol based inhibitors.
Pliers squeeze hoses shut, jaws swivel for parallel clamping,
automatic locking ratchet.
Jaw Length: 2.1/2"(65mm)
Opening: 1.3/4"(45mm)
No.4107
Propylene Glycol Anti-Freeze Coolant Tester
New professional model automotive anti-freeze coolant tester
with propylene base. Five floating discs accurately
measure protection at any temperature.
Discs are temperature compensated.
l 1 Disc floating = +20F ( -7C)
l 2 Discs floating = +10F (-12C)
l 3 Discs floating = -5F (-21C)
l 4 Discs floating = -26F (-32C)
l 5 Discs floating = -50F (-46C)
TM
171
&E
OOLS
No.5390
Carburettor Base Wrench
Offset 10 & 12mm thin jaw open end wrench
is especially designed to fit hard to reach
carburettor base nuts on most late
model vehicles.
Length: 6.1/2"(165mm)
No.5377
Carburettor Linkage
Adjusting Tool
Fits both 1/8" & 5/32"(3mm to 4mm) linkages.
Designed especially for precise bending of
linkage rods to adjust carburettor setting.
Eliminates using pliers & possible damage.
Made from heat treated steel and has inside
angled slot at each end for extra leverage
on hard to reach linkage rods.
Length: 6.1/2"(165mm)
No.5392
Carburettor Base Wrench
No.5150
Carburettor Throttle
Adjustment Tool
No.5154
Universal Carburettor Feet
Durable nylon feet hold carburettor steady
and level on workbench. Allows free
movement of linkage and throttle plates.
Four feet snap together for easy storage.
Length: 2.1/4"(57mm)
No.5570
5Pc. Carburettor
Adjusting Tool Set
5577
5576
5579
5578
No.5574
4Pc. Carburettor
Adjusting Tool Set
Contains four carburettor adjusting tools
#s 5576, 5577, 5578 & 5579 for adjusting
idle mixture screws on most vehicles.
Supplied in vinyl wallet.
Lengths: 9.1/4"(235mm)
172
TM
No.5576
"Double D" Carburettor Adjuster
No.5578
Straight Slot
Carburettor Adjuster
No.5577
4.5mm Hex Carburettor Adjuster
No.5579
3/32" In-Hex Carburettor Adjuster
&E
OOLS
Double "D"
Tip
No.6431
Universal Carburettor
Depth Gauge
Essential when setting to exact specifications.
Scales are engraved in both metric & imperial.
l Measures all three adjustments on
carburettors accurately.
1: Float level, 2: Float drop, 3: Pump rod travel.
l Easy to read gauge with stainless steel
rule makes depth measurements in small
holes and slots.
l Doubles as a protractor.
l Permits easy setting of protractor angle to
30-45-60 degrees on both sides.
Length: 6"(152mm)
1/4"Drive Sockets
are Double D &
Single Hex
No.5373
GM Computer Controlled
Carburettor Sockets
No.5357
Double "D" & Fish Tail
Carburettor Adjusting Tool
Extremely handy miniature adjuster with
Double "D" end used for mixture and idle
adjustments on Mikuni carburettors fitted on
Mitsubishi and Toyota vehicles. The fish tail
end suits Nikki and Hitachi carburettors
fitted on Nissan and Subaru vehicles.
Double "D" Opening: 6mm across flats
Fish Tail Wings: 8mm OD
Length: 2"(50mm)
A
Double "D"
Tip
Shrouded
Slotted
Tip
No.5376
Rochester Carburettor
Adjusting Set
Suits Rochester Four Barrel
Carburettors
This kit allows for adjustment, removal and
installation of previously fixed tuning
components on Rochester four barrel
carburettors. For "Double D" adjustment
screws. Length: 13"(330mm)
l
No.XT1014
Distributor / Carburettor
Adjusting Tool
The 1/8" hex bit is used for
Delco-Remy external adjustment distributors.
The non slip shrouded slotted screwdriver
adaptor is used for adjusting carburettors
where obstructions hamper visual operations.
Slotted Tip Size: 7mm x 1.1mm
Hex Bit Size: 1/8" Length: 11"(280mm)
No.5379
Stromberg Carburettor
Main Jet Tool Kit
This two piece set enables installation and
removal of both the main jet and access
plug without having to remove carburettor
from the vehicle.
Length: A: 4"(100mm)
Length: B: 1.1/2"(38mm)
No.5380
7Pc. Universal Carburettor Adjusting Set
5381 *
The 21"(535mm) long shaft with a 3.1/2"(90mm) flexible section permits bending of the tool
to reach the most difficult of locations found on carburettors, distributors and fuel injection
systems. Slim 1/4" drive head is small enough to slip between wires and other obstructions.
Set includes all adaptors below marked with (*)
Adjuster Length: 21"(535mm)
Available Separately
No.5381 * 21"(535mm) Flexible 1/4" Drive Adjusting Tool
No.5398 Shrouded Slotted Screwdriver Adaptor 9/32"(7mm)
No.5382 * Shrouded Slotted Screwdriver Adaptor 5/16"(8mm)
No.5397 Shrouded Slotted Screwdriver Adaptor 7/16"(11mm)
5398
5382 *
5397
5383 *
No.5383 * 1/8" In-Hex Bit Adaptor GM
No.5384 * 3/32" In-Hex Bit Adaptor Ford
No.5385 * "Double D" Adaptor Rochester Quadrajet & Varijet
No.5386 Slotted Screw Starter Adaptor 9/32"(7mm)
No.5387 Magnet Adaptor, Length: 1.3/4"(43mm) Dia: 1/2"(13mm)
No.5393 Slotted Screwdriver Adaptor 5/32"(4mm)
No.5394 * 4.5mm Socket Adaptor (GM)
No.5396 * 3mm In-Hex Bit EFI Throttle Adjuster (118mm Long)
5386
5387
5393
5385 *
TM
5384 *
5394 *
5396 *
173
&E
OOLS
No.4430
Carburettor Synchronizer
Four individual vacuum & fuel pump pressure gauges complete with hoses and all the necessary brass fittings to enable you to check the
balance and synchronization of multiple carburettors. Gauges are mounted on a fixed metal plate for easy reading.
Gauge Readings: 0-30Hg(0-70cmHg) Vacuum 0-14psi(0-1.1kg/cm2) Pressure
Gauge Diameter: 3.1/2"(89mm)
No.T29612
Carburettor
& Electronic
Fuel Injection
Service Set
No.4431
Carburettor
Leak Detection
Tester
This kit covers most popular carburettors and fuel injection systems.
Contains:
To remove
PRESS & HOOK
PULL
Tool holds pin
or clip securely
Also great
for "E" Clips
No.4357
Carburettor Pin Clip Tool
Fast easy removal and installation of carburettor linkage pins.
Also can be used for "E" clips and other small parts.
Length: 6.7/8(175mm)
No.T29600
Carburettor & EFI Fuel System Tool Set
No.5021
Stubby Screwdriver Bit Holder Set
No.2-7182
Multi-Purpose Carburettor
Adjusting Tool
&E
OOLS
J7216
Tool Blade
Electrical
Component
Wire Harness
Connector
Tool Blade
Pull Style
Electrical
Component
Wire Harness
Connector
4436
J7216
J7810
4404
J4404-4
J7810
This set is used for uncoupling quick release fittings on fuel lines.
Suits: Ford, Chrysler, Renault, GM, Opel, Holden, Fiat and many
other makes with quick release fittings.
Sizes: 5/16"(8mm) 3/8"(10mm) + Angle Tip
Length: 4.1/2"(115mm)
4412
4404
4412
Thread the cap of the #SFT265 in the filler neck of tank and
pump pressure to a minimum of 50in. H20 as indicated on
gauge. Within two minutes you will know if the system is
leak free. Works for both petrol and diesel engines.
Pump is all steel construction.
Gauge Diameter: 2.3/4"(70mm)
Gauge Capacity: 60in H20
2-3398
3391
SFT265
3391
2-3398
175
&E
OOLS
4416
4413 Set
4416 Set
3.1/2" dual gauge (1lb. increments) includes all the metric adaptors five
quick release Banjo bolt adaptors with seals & Schrader shut off valves.
Also includes quick release in-line fittings plus both small & large quick
release Schrader type test valves.
Qty
Contents: 74441
3.1/2" 100psi (7bar) Gauge & 16" hose assembly.......... 1
(No relief valve or tubing)
71317 Manifold with Quick release coupler............................... 1
41311 Quick coupler with 1/4" hose barb.................................. 1
35021 1/4" ID. x 2"(6 x 50mm) Hose....................................... 1
35031 5/16" ID. x 3"(8 x 75mm) Hose....................................... 1
41152 Hose Clamps.................................................................. 2
71318 Adaptor for standard Schrader valve.............................. 1
71319 Adaptor for small Schrader valve (Ford)......................... 1
74431 Adaptor, Banjo Bolt 6 x 1.0mm with shut off valve...... 1
74432 Adaptor, Banjo Bolt 8 x 1.0mm with shut off valve...... 1
74433 Adaptor, Banjo Bolt 10 x 1.0mm with shut off valve...... 1
74434 Adaptor, Banjo Bolt 12 x 1.25mm with shut off valve...... 1
74435 Adaptor, Banjo Bolt 12 x 1.5mm with shut off valve...... 1
52995 Blow Molded Plastic Case.............................................. 1
52010 Laminated Instruction Manual & Specification Chart ..... 1
A
4415
Contents: 21002
72308
36032
41576
60236
60238
60239
72304
72305
72306
72309
74434
41152
52001
Qty
2.1/2" 60psi (4bar) Gauge & 16" Hose Assembly........... 1
Quick Release Connecting Hose Assembly................... 1
3/8" I.D. x 3"(75mm) Hose............................................. 2
Bent tubing with 3/8"UNF inverted flare nut.................... 2
Adaptor, 16 x 1.5mm Female & 3/8" tube fitting............. 2
Adaptor, 14 x 1.5mm Female & 3/8" tube fitting............. 2
Female Adaptor, 5/8"UNF & 16 x 1.5mm....................... 2
Straight tubing with 3/8" inverted flare nut..................... 2
Bent tubing with 3/8" inverted flare & 16 x 1.5mm nut... 2
Adaptor, 16 x 1.5mm male & 3/8" tube fitting................. 2
Adaptor, 14 x 1.5mm male & 3/8" tube fitting................. 2
Adaptor, banjo bolt 12 x 1.25mm with nylotron washer.. 1
Hose Clamps.................................................................. 2
Sturdy Plastic Case........................................................ 1
72308-K
4450 Set
176
TM
This flow meter measures rapidly and effectively the amount of fuel
that each and every injector returns to the deposit tank. This in turn
diagnoses the injector status and if any damage is present.
Features: 1: Direct measurement of return flow of the injector.
2: Measurement of return flow using external flow meter.
3: Simultaneous measurement of up to six injectors.
Full instructions with drawings and diagrams are included.
Supplied in blow mold case for transportation purposes.
71408
71406
71404
60410
60440
71405
52001
Qty
2.1/2" 100psi (7bar) Gauge & 16" Hose Assembly........ 1
Quick Release Connecting Hose and Valve Assembly... 1
Long adaptor, 8 x 1.0mm male & 12 x 1.5mm male....... 1
Short adaptor, 8 x 1.0mm male & 12 x 1.5mm male....... 2
Adaptor, 8 x 1.0mm female & 12 x 1.5mm male............. 1
Adaptor, 10 x 1.0mm female & 12 x 1.5mm male........... 1
Adaptor, 10 x 1.0mm male & 12 x 1.5mm male.............. 1
Sturdy Plastic Case......................................................... 1
&E
OOLS
4414 Set
71408-K
4446
4445 Set
4446 Set
74447
Extension hose (1/8"NPT thread) with coupler to suit all EFI sets.
TM
74447
4450-AC Set
177
&E
OOLS
#74438
Deluxe Gauge
Hose & Bleed
Off Valve
#74440
Standard Gauge
Hose & Bleed
Off Valve
3.1/2" 100psi(7bar)
gauge with 1lb increments.
2.1/2" 100psi
(7bar) gauge,16"
hose with quick coupler.
#74433
#74434
#71329
Multi-Vehicle
Pressure Manifold
Hose Assembly
Audi, VW, Volvo
#71308
#71317
T-Manifold with
Quick Release Coupler
Use on in-line applications
#71301
#74485
#74493
3/8"
Quick Disconnect Hose
Assembly with Standard
Schrader Test Port
#74851
60 PSI Gauge
& Hose for #4415
TBI Injection Systems
#41327
Hose Assembly
Toyota, Geo
#74471
5/16"
Quick Disconnect Hose
Assembly with Standard
Schrader Test Port
#74852
#60772
TM
#74432
Ford EFI
Spring Lock Adaptor
GM & Ford CFI
Suits: Falcon, Fairlane, LTD
Hair Pin Adaptor
F-150 Pick-up, 99 onwards
Suits GMH & EA Falcon & on Laser, Mondeo, Telstar, Festiva
#71319
#71305
Volvo Adaptor,
14mm LH - Jetronic
#74484
#74458
#71304
#71408
3.1/2" Expanded
Gauge Assembly
For Master Sets
#74853
178
#74431
#74417
#71306
#71321
#11302
#41304 (1/8"npt)
#41306 (1/4"npt)
Quick Couplers
with Female Thread
#74437
O-Rings, Washers
and Valves Repair Kit
Quick Couplers
with Male Thread
#42439
Instruction Manual
and Specification Chart
#11041
#11042
#41753
Stainless Steel
Hose Clamp for In-line Kit
#10402
#10403
#10404
#11301
Street Elbow
Reducing Nipple
Reducing Adaptor
Female Coupling
1/8"npt x 1/8"npt Female 1/8"npt Male x 1/8"npt Female 1/4"npt Male x 1/8"npt Male 1/4"npt Female x 1/8"npt Male
#12200
#12202
#12203
T-Block Adaptor
Street Elbow
Adaptor
Adaptor
1/4"npt Female x 1/8"npt Male 1/8"npt Female x 1/8"npt Male 1/8"npt Male x 3/8"SAE Male 1/8"npt Male x 1/4"SAE Male
#12204
#12225
#19703
#41604
#41576
#41315 (1/8"npt)
#41314 (1/4"npt)
#41152
#11501
#41307 (1/8"npt)
#41305 (1/4"npt)
&E
OOLS
#12226
#12301
#19702
#60410
179
&E
OOLS
2-7000
2-7000
QS-2104-S
74459
74459
74454
TU470
74454
BEFORE
AFTER
EC900A
All in one self contained fuel system cleaner. The fuel injection
system can be cleaned then the engine can be decarbonized
without disconnecting the machine.
The EC900 temporarily replaces the fuel system.
The control panel allows the setting of duration time or the
fuel injector cleaning and maintains correct fuel pressure.
Just set the controls and the cleaning will be done whilst
you perform other tasks. Removes built up gum deposits
and soft carbon.
Traditional combustion system cleaners cannot clean up
carbon residue and oil on engine surfaces completely
and can actually cause residue.
No dangerous electrical connections, operates
from workshop air supply.
The fuel system cleaner comes as a beautifully
presented, excellently engineered upright cart and
rolls on two large diameter wheels and two swivel
casters for ease of movement.
A front opening door with shelves allows for storage of
fittings, hoses, accessories, fluid, solvent and tools.
Complete with hoses and couplers.
Dimensions: 37" x 15" x 14"(940mm x 381mm x 356mm)
EC900DL
EC900DL
180
TM
&E
OOLS
QS-2103
QS-2104
QS-2105-1
TM
QS-2105
QS-2105-1
181
&E
OOLS
3210
3210 Set
#3202 Noid-Light
#3205 Noid-Light
3212
3220
3212 Set
#3203 Noid-Light
#3204 Noid-Light
#3206 Noid-Light
The EFI system and idle air control can be checked quickly to
see if thats where the problem lies.
Bright LEDs flash, verifying that command signals are reaching
the IAC motor. Includes all six noid-lights and 2 GM signal lights.
Includes fibre optic extension lead for viewing from the drivers
seat while testing. Includes all 7 noid lights & 2 GM signal lights.
3209
Contains:
3201
3202
3203
3209 Set
3220 Set
TBI Noid-Light
Suits GM and other throttle body injection harnesses.
3204
3201
3202
3203
3205
3206
GM SCPI Noid-Light
Suits 1996-on SPCI Sequential central port injection systems.
3204
3205
3206
3207
3207
J6260
J3050 Set
4390
4390-1
4390-2
4390-3
Set Contains:
4390-1
4390-4
TM
4390-2
Available Separately
4390-3
4390-4
Work Safely With Hand Tools - Wear Safety Goggles
4390
182
&E
OOLS
No.CRW13M
13mm Cummins
Injection Pump Wrench
13mm, 12 Point box wrench is used to service the
injection pump mounting bolts found on 5.9L
Cummins engines.
Length: 8.1/4"(210mm)
No.2-5040
Cummins Injector
Remover & Installer
Tool Set
No.CRW716
7/16" Cummins
Fuel Pump Wrench
7/16", 12 Point box end for servicing fuel pump bolts
on NH Series Engines equipped with Cummins air
compressors.
Length: 8.1/4"(210mm)
No.2-5042
Cummins
Injector Puller
Used on a variety of
injectors found in Cummins
diesel engines: L-10, PDT and
PTD Top Stop 855NH. The two
jaw design firmly grips the injector
while it is being removed by the slide hammer.
Special adaptor for pulling STC injectors is included.
Instructions included.
Supplied in blow mold storage case. Length: 13.1/4"(336mm)
No.2-5043
Cummins Fuel Injector Remover
No.J7119
Compressor Drive Gear Puller
No.2-7471
Cummins Engine
Barring Socket
The spline end is inserted into the flywheel Suits Cummins B & C
Series Engines
housing until it engages into the ring gear.
Attach a 1/2"square drive ratchet or breaker bar to rotate engine to
bring pistons to top dead centre for injector timing.
Drive: 1/2"Square
Length: 3.3/4"(95mm)
Use with
a 1/2" UNF
Threaded
Slide Hammer
No.B217793
Cummins Fuel Injector Puller Adaptor
No.2-7161
Cummins Engine Turning Tool
The long offset bar with pins to engage into flywheel makes easy
work of cranking over the Cummins 855 cubic inch diesel engines.
Designed for use when bringing pistons to top dead centre for
injector timing.
Length: 29"(730mm)
No.A1175
Volvo Engine
Camshaft Rotator
No.9527
Cummins
Accessory Drive
Pulley Puller
No.2-5071
Cummins Water
Pump Pulley
Remover and
Installer
183
&E
OOLS
No.J7120
Cummins Drive Pulley Puller & Installer Set
Two piece set for removal & installation of the accessory drive
pulley on Cummins NH & NTC 855cu.in.diesel engines.
Length: A: 5.1/4"(133mm)
Length: B: 5.1/2"(140mm)
No.4397
Ford Diesel 7.3L Fuel Cap
Remover / Replacer
Allows for easy removal and
installation of Ford 7.3Litre diesel
fuel caps and other diesel fuel
systems using the same type of
configuration.
Length: 3.3/8"(85mm)
Slot Opening: 5mm
No.B215751
Mack Fuel Injector
Nozzle Puller Adaptor
Special threaded adapter for use on
Mack Midliner engines. Use in
conjunction with 2-7455 Nozzle Puller.
No.2-7945
Cummins Diesel Timing Tool Set
No.9586
Ford Diesel Vacuum
Pump Pulley
Remover Jaws
Use with the No.J7185 Power steering
pump alternator pulley remover for easy pulley removal on newer
Ford diesel engines. Works on Ford's 6.9L(1984-87) and 7.3L
(1988 and newer) diesel engines.
No.2-5023
Ford Injector Seat Cleaner
Length: 2.1/4"(57mm)
No.B218163
Ford Fuel Injector
Puller Adaptor
Used with a 1/2"x 20 UNF threaded shaft slide hammer.
The adaptor will easily remove injectors from Ford 6.6 &
7.8 litre diesel engines with 14mm x 1.5mm injector threads.
Threads: 1/2"x 20 UNF Threaded shaft
14mm x 1.5mm Injector thread
Length: 2.1/4"(57mm)
No.J7460
Ford Diesel Injection Pump Mounting Wrench
Specially designed wrenches to get at the hard-to-reach mounting
bolts holding the fuel injection pump to the engine. Suits 6.9 & 7.3
diesel engines (1983 - current ).
Length: A: 7.1/4"(185mm)
Length: B: 8.1/2"(216mm)
No.9585
Ford / Navistar
Diesel Air Pump
Pulley Puller
For removing the air pump pulley on Ford/Navistar diesel engines.
Fits over pulley flange. Length: 3.5/8"(92mm)
No.4448
Bosch / Lucas Diesel Injector Puller
No.2-6067
Ford Diesel Injector Remover Installer Kit
Used to remove and install injectors from Ford diesel engines
without causing damage to the injector or the cylinder head.
Suits 1994 to current Ford 3/4 & 1 Ton light trucks and vans with
7.3Litre direct injection turbocharged (DIT) diesel engine.
184
TM
No.4133
6Pc. Glow Plug Socket Set
&E
OOLS
No.2-7155A
Mack Injector Nozzle Puller
3/8" Drive deep, thin universal joint sockets for removal and
replacement of all popular glow plugs fitted to diesel engines.
Special leg collars slip over the studs of the injector hold down bolts
with the forcing screw threading onto the injector body to easily pull
No.4133-1 8mm x 72mm Long No.4133-4 12mm x 72mm Long the nozzle without damage. Includes four different size threaded
No.4133-2 9mm x 72mm Long No.4133-5 14mm x 72mm Long injector adaptors plus a special adaptor for Mack Midliner engines.
No.4133-3 10mm x 72mm Long No.4133-6 16mm x 72mm Long Length: 8"(205mm)
Set Includes:
Available Separately
No.2-7455
Mac Fuel Injector Nozzle Puller
No.2-7121
Fuel Injector Nozzle Puller
Designed to remove pencil-type fuel injector nozzles used in
agricultural and construction engines. The jaws engage around
the injector and the slide hammer action gives a straight even pull.
Used on Case, Caterpillar, GM, John Deere, Waukesha, White
diesel engines.
Length: 11"(280mm)
4046
4047
No.2-7117
Caterpillar Fuel Injector Nozzle Puller
Designed to remove pencil-type fuel injector nozzles used on
Caterpillar engines. Bridge and forcing screw applies a straight
and even pull to remove injectors without damage. Used on
Caterpillar models 1100/3208 diesel engines. Length: 7"(180mm)
No.2-6083
GM Injection Pump Timing Wrench
Turns the injection pump to set pump timing. Needed anytime the
pump is removed when valve service is required. Wrench pins fit
into holes on moulting flange of pump. Wrench enables you to
service hard to reach injection pumps on GM diesel engines fitted
to vans and trucks.
Length: 9.1/4"(235mm)
No.4447
Diesel Engine Glow Plug Pliers
Diesel glow plug pliers have specially machined jaws with a long
reach to remove and replace recessed glow plug leads, fitted on
later model European diesel vehicles.
Suits: Audi, BMW, Mercedes Benz & VW
Length: 11.1/2"(290mm)
TM
4048
4049
No.4045
4Pc. Diesel Injection Valve Sockets
Contains: Four lug type injection sockets to suit European engines.
No.J7461
Fuel Injector Pump Rotating Tool
The tool securely grips the front of the fuel injection pump so you
can rotate it while fine tuning the system. Works on Stanadyne
rotary fuel pumps found on International 6.9 & 7.3 litre engines.
Length: 10.3/4"(275mm)
No.WH101A
Diesel Injection System Priming Device
Essential for reintroduction of fuel into fuel pump following
maintenance such as fitting of new diesel filter or following drainage
of fuel tank. Must be used whenever fuel system is disturbed.
Length: 13"(330mm)
185
&E
OOLS
No.J5060
30mm Detroit Diesel
Injector Socket
1.3/16"(30mm) Double hex deep wall thin socket with 3/8" square
drive and 7/8" external hex permits easy access in confined areas.
Prevents damage to injector nozzle and its related components.
Opening: 1.3/16"(30mm) Drive: 3/8"Square & 7/8"Hex
Length: 3.1/8"(80mm)
No.4023
22mm Diesel
Injector Socket
No.4025
27mm Open Side
Diesel Injector Socket
Special cut-away in deep socket to allow access to remove and
replace injectors without damage to fuel lines. For removal and
replacement of injectors on BMW 524 TD, Ford, VW and Mercedes
diesel engines.
Length: 3.1/4"(80mm)
No.4027
22mm Open Side
Diesel Injector Socket
No.4040
28mm Open Side
Diesel Injector
Socket
No.4041
30mm Open Side
Diesel Injector
Socket
No.2-7458
Bosch Injector Nozzle Socket
4025
4027
4036
No.4020
Diesel Injector Remover Bars
These bars will pry the most stubborn injectors from the cylinder
head without having to remove it from the motor. Bars are made
of high grade alloy steel and are heat treated for strength.
Supplied in sturdy vinyl storage pouch.
Length: 12"(300mm)
No.2-6005
Diesel Glow Plug Removal
186
TM
4025
4040
No.4030
4027
4036
For use on: Alfa Romeo, Chrysler, BMW, Ford, VW, Mercedes,
Audi, Opel, Vauxhall, Seat, Volvo, Rover, MAN and Scania.
Set Contains:
Part No.
4036
4027
4025
4040
Available Separately
Description
22mm Open Side 6Pt. Injector Socket
22mm Open 2 Sides 12Pt. Injector Socket
27mm Open Side 12Pt. Injector Socket
28mm Open Side 12Pt. Injector Socket
Length
110mm
80mm
80mm
80mm
Suitable for use on Bosch "VE" Kikki & Nippon Denso type pumps with
8mm & 12mm pump threads, fitted to cars & light commercial vehicles.
Timing tool is used in conjunction with a dial test indicator.
&E
OOLS
6453
6453
6454
(Without Gauge)
(Gauge Included)
6466
6454
6450
6466
4508
6450
4509
4505
4508
#1
#2
4509-1
Fuel Pressure at Fuel Filter Adaptor
4509-2
Fuel Pump Suction Test Adaptor
4509-3
Fuel Return Line Pressure Adaptor
#4
4509-3U Fuel Return Line Pressure Adaptor
4509-4
Air Cleaner Restriction Adaptor
4509-7
Injection Pump Transfer Pressure Adaptor
#7
4509-8
Engine Oil Pressure Adaptor
Work Safely With Hand Tools - Wear Safety Goggles
TM
#3
#3U
#8
Set No.4509
187
No.2-4202
Diesel Nozzle Tester Adaptor Set
No.2-4205
Diesel Nozzle Injector Tester & Cleaner
With this tester you can test for leakage, "pop-off" pressure,
spray pattern, and chatter. Injectors can be cleaned during the
process to ensure correct spray pattern is restored.
Injector adaptors are included to suit many American, European
and Asian diesel cars and trucks.
Gauge Diameter: 2.1/2"(63mm)
Reservoir: 1500ml
No.2-4201
Diesel Nozzle Tester Adaptor Set
No.2-4203
Diesel Nozzle Tester Manifold Adaptor Set
No.
A36352
This special adaptor set is for Caterpillar high and low pressure
capsule type nozzles, and high pressure pencil type nozzles on
1100 and 3200 series Caterpillar engines. Complete with adaptors,
low pressure gauge (1000psi), cap plug and moulting brackets.
For use with #2-4205 Nozlrater Tester.
A23622
A23626
B201912
B201913
A23621
B208370
B201916
A23623
A23624
B201917
No.2-7106
Cylinder Liner Height Gauge
A23693
A23692
A23617
B208369
A38279
A43468
No.4449
Glow Plug Puller & Reamer Kit
Description
Fuel line assembly 9/16" x 18 RH thread with on pipe
No.B208629
Nozzle Tester Calibration Fluid
188
TM