Você está na página 1de 2

Drill Pipe Performance Sheet

Asset Number: 16429

Pipe Body:

Size and Weight: 4.000'' 14.00 ppf 0.330'' wall IU


Grade: XD-105
Range: 2
Tool Joint: 4.875'' x 2.688'' XT39

Tubular Assembly:
Nominal
100% RBW

95% RBW

Ultra Class
90% RBW

Premium
80% RBW

4.000
0.330
3.340

3.967
0.314
3.340

3.934
0.297
3.340

3.868
0.264
3.340

Tensile Strength (lbs):


Torsional Strength (ft-lbs):

399,502
32,603

377,820
30,789

356,319
28,996

313,854
25,474

Burst Capacity (psi):


Collapse Capacity (psi):

15,159
15,896

16,459
15,199

15,593
14,026

13,860
11,622

OD (in):
Wall Thickness (in):
Nominal ID (in):

Adjusted Weight (lbs/ft): 16.48


Approximate Length (ft): 32.0
Box TJ Length (in): 17
Pin TJ Length (in): 12
Upset Type: IU
Max Upset OD (in): 4.188
Drift Size (in): 2.563

Fluid Displacement (gal/ft): 0.25


Fluid Displacement (bblsl/ft): 0.0060
Fluid Capacity w/IPC (gal/ft): 0.43
Fluid Capacity w/IPC (bbls/ft): 0.0102
Fluid Capacity w/o IPC (gal/ft): 0.43
Fluid Capacity w/o IPC (bbls/ft): 0.0103

18
0

Notes: Body properties are calculated based on uniform OD and wall thickness.
Burst capacity for Nominal (100% RBW) based on 87.5% RBW per API.

Note: These are OEM values that may vary with actual values due to mill tolerances, IPC tolerances, OEM rounding, and other
factors. Pipe is purchased at a guaranteed 95% RBW. IPC is applied to a nominal thickness of 0.009''. Pipe will have an ID of
3.285'', which is smaller than pipe purchased at 87.5%.

Connection: XT39

Elevator Shoulder:

TJ OD (in): 4.875
TJ ID (in): 2.688
MYS (ksi): 105

Maximum MUT (ft-lbs):


Tension at Shoulder Separation @ Max MUT (lbs):
Tension at Connection Yield @ Max MUT (lbs):

18,500
Tensile Limited
485,900

Minimum MUT (ft-lbs):


Tension at Shoulder Separation @ Min MUT (lbs):
Tension at Connection Yield @ Min MUT (lbs):

15,400
563,100
579,400

Smooth Edge Height (in): N/A


Smooth Edge OD (in): N/A
SE Elevator Shoulder Capacity (lbs): N/A
Nominal TJ OD (in): 4.875
Nominal TJ OD Elevator Shoulder Capacity (lbs): 448,300
Assumed Elevator Bore (in): 4.281

N/A
N/A

Tool Joint Torsional Strength (ft-lbs): 30,900


Tool Joint Tensile Strength (lbs): 579,400

XT39 is a trademark of NOV Grant-Prideco.


Note: MUT values are based on a friction factor of 1.0. There is no published pressure rating for this connection.

Note: Elevator capacity based on assumed elevator bore, no wear factor, and contact stress of 110, 100 psi. An increased
elevator shoulder OD increases elevator capacity without affecting make-up torque.

The technical information containted herein, including the product performance sheet and other attached documents, has been extracted from information available from the manufacturer and is for reference only and not a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical
information. Workstrings International cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various
inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operation limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices,
and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box IDs, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.

www.workstringsinternational.com
Download the Workstrings International Pipe Specification App on the App Store or Google Play

08-Sep-15

Operational Limits of Drill Pipe


Connection
Pipe Body

XT39
80 % Inspection Class

Tool Joint OD

(in)

4.875

Tool Joint ID

Pipe Body OD

(in)

Wall Thickness (in) 0.330

(in)

2.688

Tool Joint Specified Minimum


105,000
(psi)
Yield Strength

Pipe Body Grade

XD-105

(ft-lbs)

(lbs)

(ft-lbs)

0
900
1,700
2,600
3,500
4,300
5,200
6,000
6,900
7,800
8,600
9,500
10,400
11,200
12,100
12,900
13,800
14,700
15,500
16,400

313,900
313,700
313,200
312,200
310,900
309,400
307,200
305,000
302,100
298,800
295,400
291,200
286,500
281,900
276,200
270,600
263,800
256,300
249,100
240,200

(lbs)

(ft-lbs)

(ft-lbs)

(lbs)

(lbs)

(lbs)

(lbs)

313,900

485,900

313,900

313,900

563,100

313,700

485,900

700

313,700

313,700

563,100

313,200

485,900

1,400

313,400

313,400

563,100

312,200

485,900

2,100

312,800

312,800

563,100

310,900

485,900

2,700

312,100

312,100

563,100

311,000

311,000

563,100

309,800

309,800

563,100

308,200

308,200

563,100

306,500

306,500

563,100

304,400

304,400

563,100
563,100

309,400
307,200
305,000
302,100
298,800
295,400
291,200
286,500
281,900
276,200
270,600
263,800
256,300
249,100
240,200

3,400

485,900

4,100

485,900

4,800

485,900

5,500

485,900

6,200

485,900
485,900

6,900

302,100

302,100

485,900

7,500

299,900

299,900

563,100

485,900

8,200

297,100

297,100

563,100

485,900

8,900

294,100

294,100

563,100

485,900

9,600

290,700

290,700

563,100

485,900

10,300

287,100

287,100

563,100

485,900

11,000

283,100

283,100

563,100

485,900

11,700

278,800

278,800

563,100

485,900

12,300

274,800

274,800

563,100

485,900

13,000

269,700

269,700

563,100

Connection
Make-up Torque Range

(ft-lbs)

15,400
15,700
16,100
16,400
16,800
17,100
17,500
17,800
18,200
18,500

(lbs)

563,100
574,000
570,500
559,900
545,800
535,200
521,100
510,600
496,500
485,900

Note: Recommended MUT should always be used when possible. If not possible, MUT should be as close to Recommended MUT as possible.
Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully responsible for the accuracy and
suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated
based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable
operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the
application. For API connections that have different pin and box IDs, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.

06-17-2015

Você também pode gostar