Escolar Documentos
Profissional Documentos
Cultura Documentos
PACIS
C264 EXPERTISE MAINTENANCE GUIDE
FUNCTION
S.GADAY
CHEF PROJET
C264
JM. BOISSET
PACIS PROJECT
MANAGER
DATE
VISA
DATE
15/10/07
DRAFT
JM. BOISSET
Page: 1/29
Edition: Z
INTRODUCTION.........................................................................................................6
General traces...........................................................................................................8
3.1
HELP.............................................................................................................................. 8
3.2
help................................................................................................................................ 8
3.3
OdLogLevel x................................................................................................................ 8
3.5
S_DBTEST_print_bay.................................................................................................11
3.6
S_DBTEST_print_norgint_list....................................................................................11
3.7
S_DBTEST_print_computer_wiring..........................................................................12
SET_DEV_MODE x......................................................................................................13
4.2
SET_MAINT................................................................................................................. 13
4.3
SET_ACTIVE................................................................................................................ 13
traces_sccx=y.............................................................................................................14
5.2
traces_apieth x............................................................................................................ 14
5.3
TunRSLines.................................................................................................................14
5.4
TunRSIed x..................................................................................................................14
5.5
S_DBTEST_print_line_info........................................................................................14
active_di board,input,state,valid...............................................................................15
6.2
aff_di_info board,input...............................................................................................15
6.3
aff_di_state board,input.............................................................................................15
6.4
aff_di_board_state board,type...................................................................................15
aff_ai_info board,input...............................................................................................16
7.2
aff_ai_data board,input..............................................................................................16
Page: 2/29
Edition: Z
7.3
aff_ai_board_data board............................................................................................16
7.4
set_ai_data index,state,value....................................................................................16
CTVT_GET_MEAS.......................................................................................................17
8.2
aff_ctvt_config............................................................................................................17
8.3
aff_ctvt_data............................................................................................................... 17
aff_do_data.................................................................................................................18
9.2
get_state_do board.....................................................................................................18
9.3
active_ccu board,channel,order................................................................................18
9.4
active_dou board,channel,order................................................................................18
10
10.1
aff_bi_info bi_norgint..............................................................................................19
10.2
aff_bi_grp_info bi_norgint......................................................................................19
10.3
aff_bi_state2 bi_norgint.........................................................................................19
10.4
10.5
get_di_norgint..........................................................................................................19
11
11.1
aff_co_info co_norgint...........................................................................................20
11.2
11.3
aff_sp_info sp_norgint...........................................................................................20
12
12.1
aff_ct_data ct_norgint............................................................................................21
12.2
aff_ct_info ct_norgint.............................................................................................21
13
13.1
aff_dm_info dm_norgint.........................................................................................22
13.2
aff_meas_info norgint............................................................................................22
13.3
aff_meas_data norgint...........................................................................................22
13.4
active_meas norgint,value,quality.........................................................................22
13.5
active_from_ai norgint,type,value,quality.............................................................22
13.6
active_meas_ctvt norgint,value,quality.................................................................22
13.7
active_meas_ied norgint,value,quality..................................................................22
Page: 3/29
Edition: Z
13.8
aff_sig_info norgint................................................................................................23
13.9
aff_sig_data norgint...............................................................................................23
13.10
active_sig norgint,value,quality.............................................................................23
13.11
aff_spi_info norgint................................................................................................23
13.12
aff_spi_data norgint...............................................................................................23
13.13
active_spi norgint,value,quality.............................................................................23
14
14.1
S_DBTEST_print_ar_item x...................................................................................24
14.2
S_AUTREC_get_ar_context....................................................................................24
14.3
S_AUTREC_get_ar_state........................................................................................24
14.4
S_DBTEST_print_cb_item x..................................................................................24
14.5
aff_sp_cb_info x.....................................................................................................24
14.6
aff_discsw_info........................................................................................................24
14.7
aff_module_info.......................................................................................................24
15
15.1
synchroInfoShow....................................................................................................25
15.2
synchroBdShow......................................................................................................25
16
16.1
aff_alarm_info x......................................................................................................26
16.2
ALARM_HELP..........................................................................................................26
16.3
read_alarm_header..................................................................................................26
16.4
read_diff_alarm_header..........................................................................................26
17
17.1
18
ccaCatcAff
donGen,group,node,nivTens,device,transf.....................................27
18.1
aff_eql_info..............................................................................................................28
18.2
aff_eql_data
19
index_eql.........................................................................................28
19.1
aff_red_data............................................................................................................. 29
Page: 4/29
Edition: Z
1 INTRODUCTION
The aim of this document is to propose the basis of expertise of the C264 application, based on
the shell traces concept.
Page: 5/29
Edition: Z
Page: 6/29
Edition: Z
3 GENERAL TRACES
3.1
HELP
3.2
help
3.3
OdLogLevel x
3.4
SET_TRACES(task ID,msk,status)
Role
Control Task (used to managed the Digital Output selfcheck)
Supervision task
Handler for DI acquisition
Handler for AI acquisition
Time synchronisation task
Control management task
xPS management task
Counters management task
MV management task
xPC management task
Alarm management task
ISAGRAF management task
Interlock / PSL management task
Autorecloser management task
Page: 7/29
Edition: Z
N
47
49
53
54
62
63
3.4.2
Name
T47RED
T49SYCHECK
T53ATC
T54HMILCD
T62TMU210
T63MICOMS1
N
32
35
36
38
40
42
48
51
55
58
59
60
61
3.4.3
Role
Redundancy management task
Synchrocheck management task
ATCC management task
Local HMI management task
Protection function management task
MiCOM S1 for protection management task
Name
T32DNP3M
T35IECM2
T36T103M7
T38SERMAN
T40CLIMAN
T42MODBM2
T48MODBM7
T51DNP3S
T55T101S
T58T101M7
T59T104S
T60MODBS7
T61DNP3E
Role
Master DNP3 communication task
Master T101/T103 level 2 communication task
Master T103 level 7 communication task
Station Bus Server management task
Station Bus Client management task
Master Modbus level 2 communication task
Master Modbus level 7 communication task
Slave DNP3 communication task
Slave T101 communication task
Master T101 level 7 communication task
Server T104 communication task
Slave Modbus level 7 communication task
Slave DNP3 IP communication task
Traces mask
Bit
0
1
2
3
4
5
6
7
Description
Input messages
Output messages
Messages during task treatment
Level 2 traces (if exist)
Not used
Not used
Not used
Not used
Example :
SET_TRACES(20,3,1) activates display of input / output messages of the GESTTS task.
Page: 8/29
Edition: Z
3.4.4
Communication traces
Level
0x0000
0x0001
0x0002
0x0004
0x0008
0x0010
0x0020
0x0040
0x0080
0x0100
0x0200
0x0400
0x0800
0x1000
0x2000
0x4000
0x8000
0x10000
0x20000
0x40000
0x80000
0x100000
0x200000
0x400000
0x800000
0x1000000
0x2000000
Comment
No trace are allowed
Trace of error
Trace of sent / received frames
Trace of sent / received data
Trace of indication of connection / disconnection of IED
Trace of sent messages
Trace of received message
Trace of BI management
Trace of command management
Trace of measurement management
Trace of disturbance management
Trace of tunneling management
Trace of synchronisation frames sent to IED
Trace of events in modbus protocol
Trace of TM sent to Application after processing
Trace of TS sent to Application after processing
Trace of initialisation.
Trace of General Interrogation
Trace of Counter management
Trace from Triangle SCL Stack
General treatment
Trace for file upload or download
Trace for SPI management
Trace for SOE management
Trace for polling
Trace of SetPoint management
Trace of SIG (MPS) Management
Page: 9/29
Edition: Z
The following table indicates which trace levels are implemented for which process :
Trace name
TRANS_TRACE_ERROR
TRANS_TRACE_TRAME
TRANS_TRACE_DATA
TRANS_TRACE_CNX
TRANS_TRACE_MES_EMI
TRANS_TRACE_MES_REC
TRANS_TRACE_TRT_TS
TRANS_TRACE_TRT_TC
TRANS_TRACE_TRT_TM
TRANS_TRACE_TRT_PERT
TRANS_TRACE_TRT_TUN
TRANS_TRACE_SYNCHRO
TRANS_TRACE_TRT_EVT
TRANS_TRACE_EMI_TM
TRANS_TRACE_EMI_TS
TRANS_TRACE_INIT
TRANS_TRACE_TRT_GI
TRANS_TRACE_TRT_CT
TRANS_TRACE_PROTOCOL
TRANS_TRACE_TRT_GEN
TRANS_TRACE_TRT_FIC
TRANS_TRACE_TRT_SPI
TRANS_TRACE_TRT_SOE
TRANS_TRACE_TRT_POL
IECM2
X
X
X
X
X
X
DNP3M
X
X
X
X
X
T101S
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
3.5
S_DBTEST_print_bay
3.6
S_DBTEST_print_norgint_list
Page: 10/29
Edition: Z
3.7
S_DBTEST_print_computer_wiring
Page: 11/29
Edition: Z
SET_DEV_MODE x
4.2
SET_MAINT
4.3
SET_ACTIVE
Page: 12/29
Edition: Z
traces_sccx=y
Action : display the input and output frames for a legacy bus
Parameters : x=[1,2,3,4] : port number defined in configuration
y=16 : trace activated
y=0 : trace desactivated
5.2
traces_apieth x
5.3
TunRSLines
5.4
TunRSIed x
Action : display the information associated to the IEDs connected to the legacy bus number x
Parameters : x = legacy bus number (0 for SCC1, 1 for SCC2, )
5.5
S_DBTEST_print_line_info
Page: 13/29
Edition: Z
active_di board,input,state,valid
6.2
aff_di_info board,input
6.3
aff_di_state board,input
6.4
aff_di_board_state board,type
Page: 14/29
Edition: Z
aff_ai_info board,input
7.2
aff_ai_data board,input
7.3
aff_ai_board_data board
7.4
set_ai_data index,state,value
Page: 15/29
Edition: Z
CTVT_GET_MEAS
Action : display value and quality of all measurements from TMU200/220 board
Parameters : none
8.2
aff_ctvt_config
8.3
aff_ctvt_data
Action : display data from TMU200/220 board associated to the synchrocheck function
Parameters : none
Page: 16/29
Edition: Z
aff_do_data
9.2
get_state_do board
9.3
active_ccu board,channel,order
9.4
active_dou board,channel,order
Page: 17/29
Edition: Z
10.5 get_di_norgint
Action : display relation between DI and BI
Parameters : none
Page: 18/29
Edition: Z
Page: 19/29
Edition: Z
Page: 20/29
Edition: Z
Page: 21/29
Edition: Z
Action : change the value and status of the measurement provided by an IED (legacy or
IEC61850)
Parameters : norgint : norgint of the measurement
Value : measurement value
Quality : 0=valid, 1=faulty, 2=unknown
Page: 22/29
Edition: Z
14.2 S_AUTREC_get_ar_context
Action : display all controls used by the autorecloser
Parameters : none.
14.3 S_AUTREC_get_ar_state
Action : display the current autorecloser status
Parameters : norgint of the autorecloser.
14.4 S_DBTEST_print_cb_item x
Action : display circuit breaker data
Parameters : x : norgint of the circuit breaker
14.5 aff_sp_cb_info x
Action : display configuration attributes of a circuit breaker
Parameters : x : norgint of the circuit breaker
14.6 aff_discsw_info
Action : display configuration attributes of a switch
Parameters : x : norgint of the switch
14.7 aff_module_info
Action : display configuration attributes of a module
Parameters : x : norgint of the module
Page: 23/29
Edition: Z
15.2 synchroBdShow
Display configuration attributes associated to the time synchronisation
Page: 24/29
Edition: Z
16.2 ALARM_HELP
Action : List of shell action linked to the alarms
Parameters : none
16.3 read_alarm_header
Action : display global data of the alarm buffer
Parameters : none
16.4 read_diff_alarm_header
Action : display global data of the differed alarm buffer
Parameters : none
Page: 25/29
Edition: Z
donGen,group,node,nivTens,device,transf
Page: 26/29
Edition: Z
18.2 aff_eql_data
index_eql
Page: 27/29
Edition: Z
Page: 28/29
Edition: Z
Blank Page
Page: 29/29
Edition: Z