Escolar Documentos
Profissional Documentos
Cultura Documentos
Rates include VAT (15%), University Overhead (30%) & Laboratory Development (2%)
Effective from 1st July 2014
Department of Civil Engineering reserves the right to change the rates at any time without any prior notice
Contact person: Prof. Dr. Abu Siddque ; Room No 408; Mobile: 01819 557964
PABX Nos.: 966 5650-56, 861 6833-38, 861 4640-44, 861 8344-49, Ext. 7226; Fax - 9665639; Web: www.buet.ac.bd/ce
BRTC Office Time : Sat to Wed => 9:00 am - 5:00 pm & Thu => 9:00 am - 1:00 pm
Sl.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Name of Tests
Test Rate
(Tk.)
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
1
2
3
4
5
6
10,000+6,000
3,500
3,000
1,500
4,500
Sl.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
13,500
10,000+1,300
2,100
10,900
5,000
4,000+500
3,100
30,500+1,500
12,000
20,000
21
22
23
24
25
26
27
28
29
Name of Tests
Bitumen (Sample preparation charge Tk.1000)
Specific gravity / Sp. Gr. / Density
Penetration / Grading
Naphta Xylene Equivalemt
Flash & Fire points
Solubility (300/- for Chem.)
Ductility (100/- for Chem.)
Softening point (R&B) (100/- for Chem.)
Thin Film Oven / Loss-on-heating
Float test
Foaming Test
Spot Test
Viscocity, Saybolt Furol (S.F.)
Viscocity (Kinematic)
Viscocity (Absolute / Dynamic)
Ash Content / Inorganic Matter
2,700
11,500
2,700
2,600+300
2,600+300
2,600+300
3,400
2,700
2,700
2,700
5,000
6,500
10,000
5,000
5,000
3,800
5,000
42,000
3,200
8,000+4,000
6,000
4,000
2,000
3,500
8,000
6,000 + **
80,000
44,000
R.C.C Pipes
1
2
3
4
5
5,900
6,500
8,400
10,700
7,200 + *
3,000
3,600
10 Absorption
2,000
11 Unit weight
12 Comp. strength of Hollow bricks, Paving block incl. unit wt.
3,500
5,000
2,700
1 Load & wt. test on manhole covers (<18 inch or 450 mm Dia)
2 Load & wt. test on manhole covers (>18 inch or 450 mm Dia)
Miscellaneous
Test Rate
(Tk.)
5,900
2,800
6,500
13,600
Note: + Pipe specimens & manhole covers have to be taken away by the
Client, immediately after the test is performed.
Notes: [* Field visit fee; Inside Dhaka = Tk. 10,000; Greater Dhaka = Tk. 16,000; Adjacnt Dhaka = Tk.21,000; Near Districts = Tk. 30,000; Remote Districts =
Tk.40,000], Remote Areas = Tk.50,000 [** Field visit fee + Tk. 2,000 if Core Cutter/Scanner/Load Cell etc. are needed.] [* & ** Transport, local hospitalities,
accommodation (in case of overnight stay) etc. are to be provided by the Client]
Page 1 of 5
Sl.
No.
1
2
3
4
5
6
7
8
Name of Tests
Test Rate
(Tk.)
Cement Concrete
Concrete cylinders (100x200mm), for a set of 3 Nos.
1,800
Concrete cylinders (150x300mm), for a set of 3 Nos.
3,200
Cubes (< 200mm) , for a set of 3 Nos.
2,800
Cubes (200mm - 300mm), for a set of 3 Nos.
3,300
Cubes (>300mm), each core cutting & testing (300/- for fuel) 5,600+300
Concrete Spun, for a set of 3 Nos.
2,800
Concrete beam in flexure, for a set of 3 Nos.
6,900
Concrete slab in flexure, for a set of 3 Nos.
9,600
Concrete Mix Designs
18,000
55,000
60,000
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
Calibration
1
2
3
4
5
6
7
1
2
Test Rate
Name of Tests
(Tk.)
5,100 +200+ **
In-Situ per core cutting & testing (without scanning)
10,600 +400+ **
In-Situ per core cutting & testing (with quick scanning)
5,400 +100+ *
In-Situ Hammer Test - per spot / location (min. 3 tests)
In-Situ Winsor Pin Test - per spot / location (min. for 3 tests) 4,950 + 50+*
In-Situ Scanning (quick & Image) per spot / location (for 2 scans)
Sl.
No.
9,600 + 300+**
5,500+300
2,000+300
4,400
20,600
27,300
3,100
4,700
5,400
6,500
8,800
10,700
261,400
8,000
4,100
10,400
8,000
11,900
15,400
23,800
8,000
8,000
6,300
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
3,500
2,500
4,000
2,400
3,500
600
23,800+400
30,000+500
3400+900
6,600
11,900
4,000
1,800
1,600+500
2,100+1,000
2,700
4,200
6,500+1,000
13,000+2,000
7,000+1,000
5,600+3,000
10,700
6,400
4,700+800
1,800
2,200
2,500
MS Bar above 32 mm
MS Bar above 50 mm (L.C. 6,000/-)
Elongation at 5D as per ISO 6935 Per Set
Shaft Rod < 40 mm. (L.C 3000/-)
Shaft Rod 40 mm. (L.C 3500/-)
Shaft Rod 50 mm. (L.C 4000/-)
Bult Welded Joint
Tranverse Breaking Load of Rail
Shear Test for Rod
29 Prestressing 19 wire Anchorage Test; (42,000+63,000)
30 Prestressing 12 wire Anchorage Test; (38,000+57,000)
4,700
5,900
1,600
2500+3000
3000+3500
3500+4000
5,900
19,900
2,300+1,200
105,000
95,000
1
2
3
4
5
6
7
8
7,500+600
9
10
11
12
13
14
15 Angle / Plate, Tension test above 16mm & up to 30mm (L.C. 2000/-)
16 Angle / Plate, Tension test above 30mm(L.C. 2500/-)
2,100
3,100
1,000
1,100
1,400
1,500
7,200
2,700
2,500
3,800+800
2,000
2,100+800
2500+2000
2,500+1,500
3,000+2,000
3,000+2,500
Notes: [* Field visit fee ; Inside Dhaka = Tk. 10,000; Greater Dhaka = Tk. 16,000; Adjacnt Dhaka = Tk.21,000; Near Districts = Tk. 30,000; Remote Districts =
Tk.40,000], Remote Areas = Tk.50,000 [** Field visit fee + Tk. 2,000 if Core Cutter/Scanner/Load Cell etc. are needed.] [* & ** Transport, local hospitalities,
accommodation (in case of overnight stay) etc. are to be provided by the Client]
Page 2 of 5
1
2
3
4
5
Timber Test
Timber Compression Test,for 1 sample (L.C 1000/-)
Timber Flexure Test, for 1 sample (L.C 1500/-)
Moisture Content, for 1 sample (L.C 1000/-)
Hardness, for 1 sample (L.C 1000/-)
Density
1
2
3
4
5
6
7
6200+1000
15000+1500
1500+300
7300+1000
1500+300
1,800
2,500
2,400
Field density test per spot (In addition Proctor/max-min density and
sieve/Hydrometer tests are needed to be done - please consult wth
33 respective Teacher), Min total fees: within Dhaka City Tk.
1,00,000/- Greater Dhaka Tk. 1,25,000/- Adjacent Dhaka Tk.
1,50,000/- Near Districts 2,00,000/- and Remote Districts 2,50,000/-
6,000+**
Non-repetitive Plate Load Test per Location, Min total fees: within
34
Sl.
No.
75,000+**
1,900
1,800
3,000
900
1,800
1,500
3,000
2,400
4,600
2,700
4,000
5,400
8,100
9,800
12,500
6,000
12,000
16,000
20,000
9,000
6,000
3,600
17,000
7,200
9,500
31,000
27,500
24,000
12,000
24,000
275,000
3,25,000/-
Test Rate
(Tk.)
32
30,000+ **
Burst Index
Cone Penetration
Grab Tensile strength & elongation (5 specimens x 2-dir)
4,000
3,000
3,000
3,000
4,000
8400+400
4,000
1,200
4,000
10
11
12
13
14
1,900
7,700
4,800
4,000
4,800
13,500
15 Grab Test (Long. & X-dir. & Top & Bot. seam) of Geo Bag
ELASTOMERIC BEARINGS / CFRP and GFRP wraps / Epoxy Resin, Primers and Epoxy based Mortars
12,200+1,100
Rubber Bearing Pad - Short-term Compression Proof Load Test to 150% of design
load and visual inspection under load using video extensometer -AASHTO 2002,
17th Edition, Clause 18.7.2.5, 18.7.4.5.6
18,200+500
9700
Rubber Bearing Pad - Long-term Compression Proof Load Test to 150% of design
load and visual inspection under load using video extensometer-AASHTO 2002,
17th Edition, Clause 18.7.2.6, 18.7.4.5.7
24,300+600
Epoxy Resin, Primers and Epoxy based Mortars - Tensile Strength &
Elongation at Break @ 14days - ASTM D638:08
12,200+1,100
Epoxy Resin, Primers and Epoxy based Mortars - Absorption / ViscosityASTM D570:98 (05)
Epoxy Resin, Primers and Epoxy based Mortars - Bond Strength @ 14days ASTM C882/C882M:05e1
6
7
3,100
3,900
11
18,200
12
6,600+700
3,100+2,000
13
4,800
24,500+600
14
7,900+800
6,100+2,000
Notes: [* Field visit fee ; Inside Dhaka = Tk. 10,000; Greater Dhaka = Tk. 16,000; Adjacnt Dhaka = Tk.21,000; Near Districts = Tk. 30,000; Remote Districts =
Tk.40,000], Remote Areas = Tk.50,000 [** Field visit fee + Tk. 2,000 if Core Cutter/Scanner/Load Cell etc. are needed.] [* & ** Transport, local hospitalities,
accommodation (in case of overnight stay) etc. are to be provided by the Client]
Page 3 of 5
Sl.
No.
1
2
3
4
Tests on Water
Routine Drinking Water Parameters (Package)
pH
Color (True or Apparent)
Turbidity
Total Hardness
Chloride (Cl)
Total Dissolved Solids (TDS)
Manganese (Mn)
Arsenic (As)
Total Iron (Fe) -Phenanthroline Method
Total Coliform(TC)/Thermotolerent Coliform (TTC)
Fecal Coliform (FC)
Environmental Quality of Soil, Sludge and Solids
300+200
pH
550+250
Electrical Conductivity
2,000+400
Organic Matter (Dry Combustion Method)
1,900+700
Water Soluble Cl / PO4 / SO4 (each)
8
9
10
1,000+500
3,300+500
1,000+500
3,100+1,200
2,200+800
1,300+400
3,400+600
3,400+600
1,200+400
1
2
3
4
5
6 PM2.5
8,500
8,500
10,000
Noise Monitoring **
1 Minimum Fee *
Sample Collection Charges +++
1 Sampling for Bacteriological Analysis **
2 Sampling for Physical and Chemical Analysis **
20,000
6,500 + **
6,500 + **
13,100+12,800
13,100+17,600
^^ For complete design, fees would be Tk. 15,000/Invented Tubewell Design Extra **2,500/Notes :
+ Plus Total Extraction Charge
Sl.
No.
Test Rate
(Tk.)
Name of Tests
Miscellaneous Water Quality Parameters
1
2
3
4
5
6
7
8
9
10
11
Test Rate
(Tk.)
Name of Tests
= 13,000+500
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
pH
Colour (True or Apparent)
200+200
250+250
900+200
200+200
150+150
200+200
400+200
600+200
1,900+800
1,900+800
550+250
Turbidity
Carbon-di-Oxide (CO2) / Acidity
P-Alkalinity/ M-Alkalinity/T-Alkalinity
Carbonate (CO3) or Bi-carbonate (HCO3) + pH
Total Hardness
Ca - Hardness
Mg - Hardness
Chloride (Cl)
Fluoride (F)
Ammonia-Nitrogen (NH3 - N)
Nitrate - Nitrogen (NO3 - N)
Nitrite - Nitrogen (NO2 - N)
Total Nitrogen (TN)
Total Kjeldahl Nitrogen (TKN) / Organic Nitrogen
Chlorine Content - Total Cl2
Chlorine Content - Free Cl2
Iodine Content
Bromine Content
Break Point Chlorination
Total Solids (TS)
400+100
600+400
350+250
350+250
3,900+1,500
11,000+3,000
Silver (Ag)
Total Organic Carbon (TOC)
350+250
350+250
400+200
400+200
6,400+1,200
800+100
1,400+400
750+150
600+400
1,700+1000
250+250
2,700+500
600+200
600+200
400+200
1,800+300
1,450+350
1,200+600
1,200+600
250+250
1,500+1,200
1100+400
3,300+500
1,000+500
2,800+1000
3,100+1,200
2,200+800
3,500+500
5,000+1000
1,300+400
1,000+500
1,500+1,000
650+150
900+400
700+500
700+500
54 E. Coli
2,800+1,000
55 Magnesium Density
56 Sodium Absorption Ratio (SAR)
57 Algae / Chlorophyll_a
2,800+1000
2,800+1000
8,300+2,500
Notes: [* Field visit fee; Inside Dhaka = Tk. 10,000; Greater Dhaka = Tk. 16,000; Adjacnt Dhaka = Tk.21,000; Near Districts = Tk. 30,000; Remote Districts =
Tk.40,000], Remote Areas = Tk.50,000 [** Field visit fee + Tk. 2,000 if Core Cutter/Scanner/Load Cell etc. are needed.] [* & ** Transport, local hospitalities,
accommodation (in case of overnight stay) etc. are to be provided by the Client]
Page 4 of 5
Sl.
No.
1
2
3
4
5
6
Test Rate
(Tk.)
Name of Tests
GRP Board Sandwich Panel
Tensile Strength (5 Nos. from each Sample)
Tensile Modulus (5 Nos. from each Sample)
Flexural Strength (127 mm x 12.7 mm x 3.2mm; 5 Nos.)
Flexural Modulus (100 mm x 10 mm x 4mm; 5 Nos.)
Impact Strength (5 Nos. from each Sample)
Water Absorption (76.2 mm x 25.4 mm x 6mm; 3 Nos.)
Sl.
No.
4,200
10,900
4,200
10,900
2,800
4,200
Test Rate
(Tk.)
Name of Tests
5,800+800
11,300+800
3
4
5
6
7 Water Tightness (24" X 20"; 3 Nos. One from each Sheet)
8 pH Value (from MOR Test)
9
2,100
2,800
2,300+600
2,800
8,500+600
1,100
Heat & Rain Wall Structures (5' X 4'; 2 Nos.; One from
each Sheet)
Consultancy on Axial Pile Load Capacity
27,600
80,000 + *
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
12
Notes: [* Field visit fee; Inside Dhaka = Tk. 10,000; Greater Dhaka = Tk. 16,000; Adjacnt Dhaka = Tk.21,000; Near Districts = Tk. 30,000; Remote Districts =
Tk.40,000], Remote Areas = Tk.50,000 [** Field visit fee + Tk. 2,000 if Core Cutter/Scanner/Load Cell etc. are needed.] [* & ** Transport, local hospitalities,
accommodation (in case of overnight stay) etc. are to be provided by the Client]
Page 5 of 5