Escolar Documentos
Profissional Documentos
Cultura Documentos
NONMANDATORY APPENDIX C
HOLE-TYPE IQI PLACEMENT SKETCHES FOR WELDS
C-210
SCOPE
43
2013 SECTION V
2013 SECTION V
Figure C-210-1
Side and Top Views of Hole-Type IQI Placements
Legend:
P = IQI placement
TN = nominal wall thickness
P1 = alternate IQI placement
TS = total thickness including backing strip and/or reinforcement
SH = shim
when not removed
T = weld thickness upon which the IQI is based
GENERAL NOTE: P and P1 are suggested placements of IQIs and are not intended to cover all geometric configurations or applications of pro
duction radiography.
44
ARTICLE 2
ARTICLE 2
Figure C-210-2
Side and Top Views of Hole-Type IQI Placements
Legend:
P = IQI placement
TN = nominal wall thickness
P1 = alternate IQI placement
TS = total thickness including backing strip and/or reinforcement
SH = shim
when not removed
T = weld thickness upon which the IQI is based
GENERAL NOTES:
(a) P and P1 are suggested placements of IQIs and are not intended to cover all geometric configurations or applications of production
radiography.
(b) IQI is based on the single wall thickness plus reinforcement.
45
2013 SECTION V
2013 SECTION V
Figure C-210-3
Side and Top Views of Hole-Type IQI Placements
Legend:
P = IQI placement
TN = nominal wall thickness
P1 = alternate IQI placement
TS = total thickness including backing strip and/or reinforcement
SH = shim
when not removed
T = weld thickness upon which the IQI is based
GENERAL NOTE: P and P1 are suggested placements of IQIs and are not intended to cover all geometric configurations or applications of pro
duction radiography.
46
ARTICLE 2
ARTICLE 2
Figure C-210-4
Side and Top Views of Hole-Type IQI Placements
Legend:
P = IQI placement
TN = nominal wall thickness
P1 = alternate IQI placement
TS = total thickness including backing strip and/or reinforcement
SH = shim
when not removed
T = weld thickness upon which the IQI is based
GENERAL NOTES:
(a) P and P1 are suggested placements of IQIs and are not intended to cover all geometric configurations or applications of production
radiography.
(b) IQI is based on the single wall thickness plus reinforcement.
47
2013 SECTION V