Você está na página 1de 89

NCA-33

January 1998
Supersedes November 1996

EXCELON Series System Features .........................................................2


EXCELON Series Product Features.........................................................4
Filters
F72G General Purpose Filters ............................................................6
F73G General Purpose Filters ............................................................8
F74G General Purpose Filters ..........................................................10
F72C Oil Removal (Coalescing) Filters.............................................12
F73C Oil Removal (Coalescing) Filters.............................................14
F74C and F74H Oil Removal (Coalescing) Filters............................16
F74V Oil Vapor Removal (Adsorbing) Filters ....................................18
R72G/R/M Pressure Regulators ...............................................................20
R73G/R Pressure Regulators ...................................................................22
R74G/R Pressure Regulators ...................................................................24
B72G General Purpose Filter/Regulators .................................................26
B73G General Purpose Filter/Regulators .................................................28
B74G General Purpose Filter/Regulators .................................................30
L72M Micro-Fog and L72C Oil-Fog Lubricator .........................................32
L73M Micro-Fog and L73C Oil-Fog Lubricator .........................................34
L74M Micro-Fog and L74C Oil-Fog Lubricators .......................................36
V72G Pressure Relief Valves ...................................................................38
V74G Pressure Relief Valves ...................................................................40
T72 Lockout and Shut-Off Valves .............................................................42
T73 Lockout and Shut-Off Valves .............................................................44
T74 Lockout and Shut-Off Valves .............................................................46
Combination Units
Series 72 Filter-Filter .........................................................................48
Series 73 Filter-Filter .........................................................................50
Series 74 Filter-Filter .........................................................................52
Series 72 Filter-Regulator-Lubricator ................................................54
Series 73 Filter-Regulator-Lubricator ................................................56
Series 74 Filter-Regulator-Lubricator ................................................58
Directional Control Valves
P74 Solenoid Operated Directional Control Valves ..........................60
P74 Air Operated Directional Control Valves 2/2..............................62
P74 Air Operated Directional Control Valves 3/2..............................64
P74 Smooth Start Poppet Valves......................................................66
P72F Smooth Start/Exhaust Valves ..................................................68
P74F Smooth Start/Exhaust Valves ..................................................70
EXCELON Accessories and System Components.................................72
Product Numbering System Charts
F72/F73/F74 General Purpose Filters...............................................76
F72/F73/F74 Oil removal (Coalescing) Filters ..................................77
F74V Oil Vapor Removal...................................................................78
R72/R73/R74 Pressure Regulators...................................................79
B72/B73/B74 Filter/Regulators ..........................................................80
L72/L73 Lubricators...........................................................................81
L74 Lubricators..................................................................................82
V72/V74 Relief Valves.......................................................................83
T72/T73/T74 Shut-Off Valves............................................................84
72/73/74 Filter-Filter Combinations Units ..........................................85
72/73/74 F-R-L Combination Units....................................................86
P74 Directional Control Valves..........................................................87
P72/P73/P74 Directional Control Valves...........................................88
Warning and Warranty ......................................................................89

74 Series Combination
Filter/Regulator and Lubricator
Unit, featuring an in-line shut-off
valve, and Quikclamp system.

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

EXCELON Series System Features


Features
The EXCELON Series, Norgren's
premier line of filters, regulators,
lubricators, and accessories, is
available in 1/4", 3/8", 1/2" or 3/4"
pipe sizes. This newest line of
Norgren products features a modular
design that allows conventional
in-line installation using pipe
threads, or modular installation
using the patented Quikclamp
System. The one-piece Quikclamp
assembly allows installation and
removal of EXCELON Units and
Combination Units without breaking a
pipe connection.
Aesthetic Appearance

piece ball valve that opens and


closes with a quick quarter turn. The
threaded outlet provides quick, easy
connection of a 1/4" drain line if
desired. The liquid level indicator
utilizes a high visibility prismatic lens
that allows liquid level monitoring up
to 30-feet away at angles up to 20.

We designed the EXCELON Series


so individual products could be
installed directly into the air line with
threaded connections if desired.

Nitrile or Fluorocarbon Seals


Elastomer seals and diaphragms
can be selected for superior
compatibility and wear
characteristics.
Durable, Aluminum
Construction

External surfaces are protected with a


baked on, satin black epoxy paint
over a chromate conversion coating,
providing excellent corrosion
protection and chip resistance. These
products have an attractive,
contemporary design that will
complement the appearance of any
OEM equipment.

The 73 and 74 Series body


and metal bowl are
manufactured from lightweight, high
strength, corrosion resistant
aluminum. The 72 Series utilizes
zinc, providing high strength and
corrosion resistance.

A Wide Range of Options and


Accessories

The EXCELON Series provides high


flow with minimum pressure losses
and the accuracy you expect from
Norgren Products.

The EXCELON Series is available


with a wide range of options and
accessories, including wall and panel
mounting brackets, shut-off valves to
isolate and exhaust pressure from
downstream equipment, porting
blocks to provide auxiliary outlets,
electrical pressure switches that
monitor system pressure, metal bowl
or polycarbonate bowl with metal
guard, and many more. These
options and accessories allow costefficient customizing for your specific
application.

In-line Installation

Performance Tested

In-line installation with


a shut-off valve,
filter/regulator, pressure
switch, and oil removal
filter.

Wall mounting bracket can


be used for in-line
installation of all EXCELON
Series products.

Individual units in combinations are


connected to each other with the
patented Quikclamp.
Service Life
Indicator

Quarter Turn Manual Drain and


Liquid Level Indicator
The patented quarter turn manual
drain and the unique liquid level
indicator on metal bowls were
designed with the end user in mind.
The manual drain is a miniature one-

Prismatic
Lens
Liquid
Level
Indicator

Venting Type
Lockout Valve

Pressure
Switch
Rugged 1/4
Turn Manual
Drain

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

EXCELON Series System Features


Modular Installation

Quikclamp Features:

The EXCELON modular system


provides a unique and time-saving
method of connecting and replacing
air line products (filters, regulators,
lubricators, valves, etc). The heart of
the system is the patented Quikclamp
- a simple and unique clamping
device that holds the various
products in rigid combinations.
Flanges on the products slide into
V Grooves in the Quikclamp. Two
face-sealing o-rings provide a
positive seal when the clamp is
closed and the captive screw is
tightened.

True one-piece assembly.

No loose parts - nothing to


drop on the floor when
replacing a unit.

The Quikclamp and


the EXCELON Series
Products can be installed
in 90 increments,
providing unmatched
versatility in orientation.
Audible air leak warns
of air pressure if the
quick release
screw is backed
off when the unit
is pressurized.

Wall mounting bracket attaches to


the back of the Quikclamp,
providing quick, easy installation to
a panel, wall, or machine
surface.
Other Norgren products
can be connected to the
EXCELON Series using
Quikclamps and pipe
adapters.

The Quikclamp with


mounting bracket will
actually hold the Excelon
components for you, thus
freeing your other hand
to tighten or adjust the
assembly.

The 72 Series uses a 3 mm allen


wrench, and the 73 and 74 Series
use a 5/32" (4 mm) allen wrench.

Quikclamp

Quikclamp Modular System


shown includes a filter,
regulator, lubricator,
smooth-start valve, pipe
adapters, and wall
mounting brackets.

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

EXCELON Series Product Features


Filters (General Purpose,
Coalescing, and Adsorbing)

Regulators

Filter/Regulators

General purpose filters have a depthtype element with an extra large surface
area for extended service life. The
elements, available in 5, 25, and 40m
ratings, can be cleaned in soap and
water.

Easy to Service and Adjust


Regulator can be disassembled for
servicing without removal from the air
line. The standard nonrising pressure
adjustment knob and the optional
T-handle provide easy adjustment at
any pressure. Pressure settings are
locked by merely pushing on the knob
or tightening the T-handle lock nut.

Easy to Service and Adjust


Filter/Regulator can be disassembled
for cleaning and servicing without
removal from the air line. The quick
release bayonet type bowl can be
removed and installed with a quick 1/8
turn. An interlock helps prevent removal
when bowl is pressurized. The depthtype element, which can be cleaned,
has an extra large surface area for
extended service life. The standard
nonrising pressure adjustment knob and
the optional T-handle provide easy
adjustment at any pressure. Pressure
settings are locked by merely pushing
down on the knob or tightening the
T-handle lock nut. Pressure settings on
filter/regulators with knob adjustment
can be made tamper resistant by the
installation of a new tamper resistant
shroud.

High performance oil removal


(coalescing) filters have a coalescing
element that removes solid particles
down to 0.01 m. Maximum remaining
oil content of air leaving the filter is 0.01
ppm at 70F (21C) with an inlet
concentration of 17 ppm.
Oil vapor removal (adsorbing) filters
have an activated carbon element that
acts as an adsorbent in the removal of
oil vapors and odors. Maximum
remaining oil content of air leaving the
filter is 0.003 ppm at 70F (21C) when
installed with proper prefilters to remove
solids and liquids.
Easy to Service
Filters can be disassembled for
servicing without removal from the air
line. The quick release bayonet type
bowl can be removed and installed with
a quick 1/8 turn. An interlock helps
prevent removal when bowl is
pressurized.
Optional Features
General purpose and oil removal filters
are available with manual,
semiautomatic (72 Series), or automatic
drain, metal bowl with liquid level
indicator, transparent bowl (72/73
Series), or transparent bowl with metal
guard, and a red/green service life
indicator that provides a visual
indication of the filter element condition.

Balanced Valve Design


The balanced valve provides superior
regulation by reducing the effect of
variations in inlet pressure on the outlet
pressure.
Large Area Diaphragm
The new, large area diaphragm
provides excellent sensitivity for a
general purpose regulator.
Optional Features
Available with or without a pressure
gauge, three outlet pressure ranges up
to 250 psig (73/74 Series), and relieving
or nonrelieving diaphragms. Regulators
with a relieving diaphragm reduce the
outlet pressure when the pressure
setting is reduced, even when the
downstream system is dead-ended.
Pressure settings on regulators with
knob adjustment can be made tamper
resistant by the installation of a new
tamper resistant shroud.

Littleton, CO USA

Phone 303-794-2611

Balanced Valve Design


The balanced valve provides superior
regulation by reducing the effect of
variations in inlet pressure on the outlet
pressure.
Optional Features
The filter section is available with manual,
automatic, or semiautomatic (72 Series)
drain, metal bowl with liquid level indicator,
transparent bowl (72/73 Series), or
transparent bowl with metal guard, 5, 25,
or 40-micron filter element. The regulator
section is available with or without a
pressure gauge, three outlet pressure
ranges up to 250 psig, and a relieving or
nonrelieving diaphragm. Filter/regulators
with a relieving diaphragm reduce the
outlet pressure when the pressure setting
is reduced, even when the downstream
system is dead-ended.
Fax 303-795-9487

1/98

EXCELON Series Product Features


Lubricators

Relief Valve

Directional Control, Smooth


Start, and Lock Out Valves

Easy to Service
Lubricator can be disassembled for
servicing without removal from the air
line. The quick release bayonet type
bowl can be removed and installed with
a quick 1/8 turn. An interlock prevents
removal when bowl is pressurized. Most
working parts are contained in a single,
removable capsule. The sight lens
optically changes when liquid is present,
clearly indicating oil level.

Easy to Service and Adjust


Relief valve can be disassembled for
servicing without removal from the air
line. The nonrising pressure adjustment
knob provides easy hand adjustment at
any pressure range and is locked by
merely pushing on the knob.

Configurations Available
The modular EXCELON Directional
Control Valves are available in 2-port/2position and in 3-port/2-position
configurations with solenoid or air
operators (74 Series). Smooth start/
exhaust valves (72/74 Series), and
combination smooth start/exhaust
valves with lockout option (74 Series)
are also available.

Micro-Fog and Oil-Fog


Micro-Fog and Oil-Fog configurations
are available. Micro-Fog lubricators,
identified by a red adjustment, are used
for applications containing one or more
points of lubrication, cylinders, and
multiple or single tools. Oil-Fog
lubricators, identified by a green
adjustment, are commonly used for
lubricating a single air tool, cylinder, or
air motor, and are located as near the
device as possible.
Optional Features
Available with a transparent reservoir
(72/73 Series), metal reservoir with
liquid level indicator, transparent
reservoir with metal guard, 1-quart
metal reservoir (74 Series), and a
bidirectional Oil-Fog unit (74 Series).
The bidirectional unit is designed for
use when the lubricator will be located
downstream of frequently cycling
directional control valves.

1/98

Optional Features
Available with or without a pressure
gauge and three relief pressure ranges
up to 250 psig (74 Series).
Shut-Off Valve
The 3-way
EXCELON Shut-Off
Valve, typically
attached to the inlet
end of a combination
unit, is particularly
useful for isolating
and depressurizing a
downstream unit
requiring maintenance. These are slide
type valves that operate with a quick
movement of the slide. The 3-way
valve, which is color coded yellow, can
be locked only in the closed position.
Two-way valves are also available.
Subbase Mounted
Pressure Switch
The modular pressure
switch monitors air
pressure and provides
an electrical output
when the pressure
drops below or exceeds an adjustable
preset pressure.
The switch mounts on a subbase that
also provides two auxiliary outlets.

Littleton, CO USA

Phone 303-794-2611

Connector Options
A cable grip connector with or without
indicator lights and surge protection is
available.
Porting Block
The modular porting block
provides three auxiliary
outlets.
Manifold Block
The modular manifold block provides
manifolding
capability for up
to three
components,
allowing the
system designer
to customize
each application.

Fax 303-795-9487

F72G General Purpose Filter


1/4" and 3/8" Port Sizes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.
High efficiency water and particle removal. Particle
removal per ISO 8573-1, Class 5 and Class 3. See
Technical Data.
Highly visible, prismatic liquid level indicator lens
Optional mechanical service indicator turns from
green to red when the filter element needs to be
replaced.
Optional electrical service indicator provides
electrical output when the filter element needs to be
replaced.
Quick release bayonet bowl
Patented quarter turn manual drain
Ordering Information

ISO Symbols

Standard Models
Model Numbers - Without service
indicator: includes automatic drain,
and 2.2 oz. transparent bowl.

Port
Size
PTF

Weight
lbs. (kg)

Flow *
scfm (dm3/s)

40m Element

5m Element.

1/4"

1.08 (0.49)

50 (24)

F72G-2AN-AL3

F72G-2AN-AL1

3/8"

1.08 (0.49)

50 (24)

F72G-3AN-AL3

F72G-3AN-AL1

* Approximate flow with 40 m element at 100 psig (6.2 bar) inlet pressure and 5
psid (0.3 bar) pressure drop.

Automatic and
Semiautomatic drain

Manual drain

Operation

Options - Select the desired filter from the preceding order table, then change
the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 76 for additional options.

F72G - -
Optional Threads
B ISO Rc taper
G ISO G parallel
Optional Service Indicator
D With service indicator
E With electrical service indicator

Optional Bowl
D 1.9 oz metal with liquid
level indicator*
W 2.2 oz. transparent with
guard
Optional Drain
Q 1/4 turn manual
S Semiautomatic

*Automatic drain not available with D bowl option. For other bowl options (shorter
and lower 1.9 oz. capacity) consult factory.

Service Kits
Seal and gasket kit: 4380-500
Liquid level indicator repair kit: 4380-030
Filter element, 5m: 5925-03
Filter element, 40m: 5925-02
Manual drain: 619-50
Semiautomatic drain: 5379-50
Automatic drain: 4000-50R

For accessories see pages 72 thru 75.

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

F72G
Technical Data
Performance Characteristics

Pressure Drop

.4

.3

Inlet
psig 25
Pressure bar 1.7

40 60
2.8 4.1

90 120 150 180


6.2 8.3 10.3 12.5

5m Element
4

.2
2
.1

20

40

10

20

60

80

30
Air Flow

scfm

100
40

50

dm3/s

Pressure Drop

.3

psid

Flow Curve, F72G


Port Size: 1/4"

.4

NOTE
Water vapor will pass through these units and could condense into liquid
form downstream as air temperature drops. Install a Norgren air dryer if
water condensation could have a detrimental effect on the application.

psid

bar,d

Flow Curve, F72G


Port Size: 1/4"

bar,d

Fluid: Compressed air


Maximum Pressure
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating Temperature*
Transparent bowl: 0 to 125F (-18 to 50C)
Metal bowl: 0 to 150F (-18 to 65C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C)
Particle Removal: 5m or 40m filter element
Air Quality: Within ISO 8573-1, Class 3 and Class 5
Manual drain connection: 7/16-24 UNS male for 1/4" tube nut and ferrule
Approximate flow at 90 psig (6.2 bar) inlet pressure and 5 psid (0.3 bar) pressure drop:
5m element: 46 scfm (22 dm3/s)
40m element: 50 scfm (24 dm3/s)
Semiautomatic drain connection: Push on 5/16" (8mm) ID tube
Semiautomatic drain operating conditions: Pressure operated
Bowl pressure required to close drain: Greater than 1.5 psig (0.1 bar)
Bowl pressure required to open drain: Less than 1.5 psig (0.1 bar)
Minimum air flow required to close drain: 1 scfm (0.5 dm3/s)
Manual operation: Lift stem to drain bowl
Automatic drain connection: Accepts 1/8 PTF and ISO R1/8
Automatic drain operating conditions: Float operated
Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 0.2 scfm (0.1 dm3/s)
Manual operation: Depress pin inside drain outlet to drain bowl

Inlet Pressure psig 25


bar 1.7

40 60
2.8 4.1

90 120 150 180


6.2 8.3 10.3 12.5

40m Element

.2
2
.1

Materials
Body: Zinc
Bowl
Transparent: Polycarbonate
Transparent with guard: Polycarbonate, Zinc guard
Metal: Zinc
Metal Bowl Liquid Level Indicator Lens: Transparent nylon
Element: Sintered polypropylene
Elastomers: Neoprene & nitrile
Optional Service Indicator
Body: Transparent nylon
Internal parts: Acetal
Spring: Stainless steel
Elastomers: Nitrile

Dimensions in Inches (mm)

Optional Service
Indicator

20
10

40
20

60
30
Air Flow

80

scfm

100
40

50

dm3/s

2.2 ounce bowl with automatic drain

1.91 (48)
2.10 (53)
5.27 (134)*

0.75
(19)
7.27 (185) minimum clearance
required to remove bowl*

5.43 (138)**

2.10 (53)

Optional Service
Indicator
0.75
(19)

7.43 (189) Minimum clearance


required to remove bowl**

1.98 (50)

* Add 1.7" (43) for semiautomatic drain.


** Add 1.97" (50) for semiautomatic drain, and 0.28''
(7) for 1/4 turn manual drain.

1/98

1.9 ounce bowl with 1/4 turn manual drain.

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

F73G General Purpose Filter


1/4", 3/8", 1/2" Port Sizes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.
High efficiency water and particle removal. Particle
removal per ISO 8573-1, Class 5 and Class 3. See
Technical Data.
Highly visible, prismatic liquid level indicator lens
Optional mechanical service indicator turns from
green to red when the filter element needs to be
replaced.
Optional electrical service indicator provides
electrical output when the filter element needs to be
replaced.
Quick release bayonet bowl
Patented quarter turn manual drain

Ordering Information

ISO Symbols

Standard Models
Port
Size
PTF

Weight
lbs. (kg)

Flow*
scfm (dm3/s)

1/4"
3/8"
1/2"

1.1 (0.50)
1.1 (0.50)
1.1 (0.50)

62 (29)
75 (35)
80 (38)

Model Numbers - Without service


indicator: includes automatic drain,
and metal bowl with liquid level
indicator
40m Element
5m Element.
F73G-2AN-AD3
F73G-3AN-AD3
F73G-4AN-AD3

F73G-2AN-AD1
F73G-3AN-AD1
F73G-3AN-AD1

Automatic Drain

Manual Drain

Operation

* Approximate flow with 40 m element at 100 psig (6.2 bar) inlet pressure and
5 psid (0.3 bar) pressure drop.

Options - Select the desired filter from the preceding order table, then change
the model number as shown in the following diagram to obtain the desired option.
Also see Product Numbering Chart on page 76 for additional options.

F73G - -
Optional Threads
B ISO Rc taper
G ISO G parallel

Optional Bowl
T Transparent
P Transparent with guard

Optional Service Indicator


D With mechanical service indicator
E With electrical service indicator

Optional Drain
Q 1/4 turn manual

Service Kits
Seal and gasket kit: 4380-600
Liquid level indicator repair kit: 4380-020
Filter element, 5m: 4438-01
Filter element, 40m: 4438-03
Manual drain: 619-50
Automatic drain: 4000-51R

For accessories see pages 72 thru 75.

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

F73G
Performance Characteristics

10
0.6

0.4

Inlet Pressure psig


bar

5m Element

40
2.8

60
4.1

90
6.2

120 150
8.3 10.3

4
0.2
2

0
0

20

10

40

60

20

80

30

100
40

scfm
50

dm3/s

AIR FLOW

psid

Flow Curve, F73G


Port Size: 3/8"

Materials
Body: Aluminum
Bowl:
Transparent: Polycarbonate
Transparent with guard: Polycarbonate, steel guard
Metal: Aluminum
Metal bowl liquid level indicator lens: Transparent nylon
Element: Sintered polypropylene
Elastomers: Neoprene and nitrile
Mechanical service indicator materials:
Body: Transparent nylon
Internal parts: Acetal
Spring: Stainless steel
Elastomers: Nitrile

psid

bar d

Flow Curve, F73G


Port Size: 3/8"

bar d

Fluid: Compressed air


Maximum pressure
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating temperature*
Transparent bowl: 0 to 125F (-20 to 50C)
Metal bowl: 0 to +175F (-20 to +80C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F (2C.)
Typical flow with a 40m element at 90 psig (6.3 bar) inlet pressure and 7 psig (0.5 bar)
pressure drop: 75 scfm (35 dm3/s)
Particle removal: 5m, 25m, or 40m filter element
Air quality: Within ISO 8573-1, Class 3 and Class 5 (particulates)
Manual drain connection: 7/16-24 UNS male for 1/4" tube nut and ferrule
Automatic drain connection: Accepts 1/8 PTF and ISO R1/8
Automatic drain operating conditions: Float operated
Bowl pressure required to close drain: Greater than 5 psig
(0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 0.2 scfm (0.1 dm3/s)
Manual operation: Depress pin inside drain outlet to drain bowl

PRESSURE DROP

Technical Data

PRESSURE DROP

10
0.6
Inlet Pressure psig
bar

0.4

40
2.8

60
4.1

90
6.2

120 150
8.3 10.3

40m Element

4
0.2
2

0
0
0

20
10

40
20

60
30

80

100
40

scfm
50

dm3/s

AIR FLOW

Dimensions in Inches (mm)


* Minimum clearance required to remove bowl.

2.45 (62)

1.22 (31)

2.68 (68)

6.15 (156)

8.50 (216) *

5.80 (147)

8.15 (207) *

1.00 (25)

2.36 (60)

Optional
Mechanical
Service
Indicator

Automatic Drain
1/4 Turn Manual Drain

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

F74G General Purpose Filter


3/8", 1/2", 3/4" Port Sizes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.
High efficiency water and particle removal. Particle
removal per ISO 8573-1, Class 5 and Class 3. See
Technical Data.
Highly visible, prismatic liquid level indicator lens
Optional mechanical service indicator turns from
green to red when the filter element needs to be
replaced.
Optional electrical service indicator provides
electrical output when the filter element needs to be
replaced.
Quick release bayonet bowl
Patented quarter turn manual drain

Ordering Information

ISO Symbols

Standard Models
Model Numbers - Without service
indicator: Includes automatic drain and
metal bowl with liquid level indicator.

Port
Size
PTF

Weight
lbs. (kg)

Flow *
scfm (dm3/s)

40m Element.

5m Element.

3/8"
1/2"
3/4"

1.82 (0.83)
1.79 (0.81)
1.75 (0.79)

120 (57)
150 (71)
150 (71)

F74G-3AN-AD3
F74G-4AN-AD3
F74G-6AN-AD3

F74G-3AN-AD1
F74G-4AN-AD1
F74G-6AN-AD1

Automatic Drain

Manual Drain

Operation

* Approximate flow with 40 m element at 100 psig (6.9 bar) inlet pressure and 5
psid (0.3 bar) pressure drop.

Options - Select the desired filter from the preceding order table, then change
the model number as shown in the following diagram to obtain the desired option.
Also see Product Numbering Chart on page 76 for additional options.

F74G - -
Optional Threads
B ISO Rc taper
G ISO G parallel

Optional Bowl
P Transparent with metal
guard

Optional Service Indicator


D With service indicator
E With electrical service indicator

Optional Drain
Q 1/4 turn manual

Service Kits
Seal and gasket kit: 4380-700
Liquid level indicator repair kit: 4380-050
Filter element, 5m: 4338-04
Filter element, 40m: 4338-05
Manual drain: 619-50
Automatic drain: 3000-10

For accessories see pages 72 thru 75.

10

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

F74G
Performance Characteristics
psid

bar,d

Inlet Pressure psig 25


bar 1.7

40
2.8

60
4.1

90
6.2

120 150
8.3 10.3

180
12.5

5m Element
.4

.3

.2
2
.1

40

80

20

120

40

160

60
Air Flow

scfm

200

100 dm3/s

80

Flow Curve, F74G


Port Size: 1/2"
psid

NOTE
Water vapor will pass through these units and could condense into liquid form
downstream as air temperature drops. Install a Norgren air dryer if water
condensation could have a detrimental effect on the application.

Flow Curve, F74G


Port Size: 1/2"

Pressure Drop

Fluid: Compressed air


Maximum inlet pressure
Transparent bowl: 150 psig (10.3 bar)
Metal bowl: 250 psig (17.2 bar)
Operating temperature*
Transparent bowl: 0 to 125F (-18 to 50C)
Metal bowl: 0 to 175F (-18 to 79C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C.)
Particle removal: 5m, 25m, or 40m filter element
Air quality: Within ISO 8573-1, Class 3 and Class 5 (particulates)
Manual drain connection: 7/16-24 UNS male (for 1/4" tube nut and ferrule)
Automatic drain connection: Accepts 1/8 PTF
Automatic drain operating conditions: Float operated
Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 2.0 scfm (1.0 dm3/s)
Manual operation: Depress pin inside drain outlet to drain bowl.

bar,d

Technical Data

Inlet Pressure psig


bar

40m Element

25
1.7

40
2.8

60
4.1

90
6.2

120
8.3

150
10.3

180
12.5

Materials
Body: Aluminum
Bowl
Transparent: Polycarbonate with zinc bowl guard
Metal: Aluminum
Metal bowl liquid level indicator lens: Transparent nylon
Element: Sintered polypropylene
Elastomers: Nitrile and neoprene
Optional service indicator
Body: Transparent nylon
Internal parts: Acetal
Spring: Stainless steel
Elastomers: Nitrile

Pressure Drop

.4

.3

.2
2
.1

0
0

40
20

80
40

120
60
Air Flow

160

200
80

scfm
100 dm3/s

Dimensions in Inches (mm)


* Minimum clearance required to remove bowl.
2.89
(74)
1.45
(37)

3.15
(80)

3.15
(80)

2.36
(60)

2.36
(60)
1.00 (25)

1.00 (25)

9.10*
(231)

1/98

6.35 (161)
Automatic Drain

9.70*
(246)

Littleton, CO USA

6.95 (177)
1/4 Turn
Manual Drain

Phone 303-794-2611

Fax 303-795-9487

11

F72C Oil Removal Filter


1/4" and 3/8" Port Sizes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.
High efficiency particle and oil removal, within ISO
8573-1: Class 1.-.2. See Technical Data.
Highly visible, prismatic liquid level indicator lens.
Patented quarter turn manual drain.
Standard mechanical service indicator turns from
green to red when the filter element needs to be
replaced.
Optional electrical service indicator provides
electrical output when the filter element needs to be
replaced.
Quick release bayonet bowl.
Patented quarter turn manual drain.

Ordering Information

ISO Symbols

Standard Models

Port
Size
PTF
1/4"
3/8"

Weight
lbs. (kg)
0.88 (0.40)
0.88 (0.40)

Flow*
Saturated
Element
scfm (dm3/s)
10.5 (4.4)
10.5 (4.4)

Flow*
Model Numbers Dry
Service life indicator,
Element
automatic drain, 2.2 oz
scfm (dm3/s)
transparent bowl
16 (8)
F72C-2AD-AL0
23 (11)
F72C-3AD-AL0

Automatic and
Semiautomatic drain

Manual drain

*Approximate flow at 100 psig (6.3 bar) inlet pressure and 3.0 psid (0.2 bar)
pressure drop. Dry flows good only for systems with all oil, water, and other
aerosols removed.

Options - Select the desired filter from the preceding order table, then change

Operation

the model number as shown in the following diagram to obtain the desired option.
Also see Product Numbering Chart on page 77 for additional options.

F72C - -
Optional Threads
B ISO Rc taper
G ISO G parallel
Standard Service Indicator
N Without service indicator
E With electrical service indicator

Optional Bowl
D 1.9 oz. metal with liquid
level indicator*
W 2.2 oz. transparent with
guard
Optional Drain
Q 1/4 turn manual
S Semiautomatic

*Automatic drain not available with D bowl option. For other bowl options (shorter
and lower 1.9 oz. capacity) consult factory .

Service Kits
Seal and gasket kit: 4380-500
Liquid level indicator repair kit: 4380-030
Filter element, (coalescing): 5925-09
Manual drain: 619-50
Semiautomatic drain: 5379-50
Automatic drain: 4000-50R
NOTE
For maximum service life, install a general purpose filter with a 5m element
upstream of the oil removal filter.

12

Littleton, CO USA

For accessories see pages 72 thru 75.

Phone 303-794-2611

Fax 303-795-9487

1/98

F72C
Technical Data

Materials
Body: Zinc
Bowl
Transparent: Polycarbonate
Transparent with guard: Polycarbonate, Zinc guard
Metal: Zinc
Metal Bowl Liquid Level Indicator Lens: Transparent nylon
Element: Synthetic fiber and polyurethane foam
Elastomers: Neoprene & nitrile
Service Indicator
Body: Transparent nylon
Internal parts: Acetal
Spring: Stainless steel
Elastomers: Nitrile

Performance Characteristics

Pressure Drop

.4

.3

psid

bar,d

Flow Curve, F72C (Oil Removal)


Port Size: 1/4"
Filter Element: Coalescing, Saturated

6
Inlet
psig 15
Pressure bar 1.0

40
2.8

25
1.7

90
6.3

60
4.1

120
8.3

.2

Saturated
Element

2
.1

0
0

12
4

16

6
Air Flow

scfm

20
8

10

dm3/s

.4

.3

psid

bar,d

Flow Curve, F72C (Particle Removal)


Port Size: 1/4"
Filter Element: Coalescing, Dry

Pressure Drop

Fluid: Compressed air


Maximum Pressure
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating Temperature*
Transparent bowl: 0 to 125F (-18 to 50C)
Metal bowl: 0 to 150F (-18 to 65C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Particle removal down to 0.01 m.
Air quality: Within ISO 8573-1, Class 1 (particulates) and Class 2 (oil content)
Maximum remaining oil aerosol content of air leaving the filter: 0.01 ppm at 70 F
(21C) with an inlet concentration of 17 ppm.
Approximate flow at 90 psig (6.3 bar) inlet pressure:
Saturated element: 10.5 scfm (4.4 dm3/s) at 3 psid (0.2 bar) pressure drop
Dry element: 23 scfm (11 dm3/s) at 5 psid (0.3 bar) pressure drop **
**Dry flows apply only when all oil, water, and other aerosols are removed.
Manual Drain Thread: 7/16-24 UNS for 1/4" tube nut and ferrule
Semiautomatic Drain Connection: Push on 5/16" (8mm) ID tube
Semiautomatic drain operating conditions: Pressure operated
Bowl pressure required to close drain: Greater than 1.5 psig (0.1 bar)
Bowl pressure required to open drain: Less than 1.5 psig (0.1 bar)
Minimum air flow required to close drain: 1 scfm (0.5 dm3/s)
Manual operation: Lift stem to drain bowl
Automatic drain connection: Accepts 1/8PTF and ISO R1/8
Automatic drain operating conditions: Float operated
Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 0.2 scfm (0.1 dm3/s)
Manual operation: Depress pin inside drain outlet to drain bowl

Inlet
psig 15
Pressure bar 1.0

25
1.7

40
2.8

90
6.3

60
4.1

120
8.3

150
10.3

180
12.5

200
14.0

.2

Dry Element

2
.1

0
0

8
4

16
8

24
12
Air Flow

32

scfm

40
16

20

dm3/s

Dimensions in Inches (mm)


1.98 (50)

Service
Indicator

2.10 (53)
5.27 (134)*

7.27 (185) minimum clearance


required to remove bowl*

0.75
(19)

2.10 (53)
5.43 (138)**

7.43 (189) Minimum clearance


required to remove bowl**

0.75
(19)

Service
Indicator

2.2 ounce bowl with automatic drain

1/98

1.91 (48)

* Add 1.7'' (43) for semiautomatic drain.


** Add 1.97'' (50) for semiautomatic drain, and
0.28 (7) for 1/4 turn manual drain.

1.9 ounce bowl with 1/4 turn manual drain.

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

13

F73C Oil Removal Filter


1/4", 3/8", 1/2" Port Sizes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.
High efficiency particle and oil removal, within ISO
8573-1: Class 1.-.2. See Technical Data.
Highly visible, prismatic liquid level indicator lens.
Patented quarter turn manual drain.
Standard mechanical service indicator turns from
green to red when the filter element needs to be
replaced.
Optional electrical service indicator provides
electrical output when the filter element needs to be
replaced.
Quick release bayonet bowl.
Patented quarter turn manual drain.

Ordering Information

ISO Symbols

Standard Models

Port
Size
PTF
1/4"
3/8"
1/2"

Weight
lbs. (kg)
1.2 (0.54)
1.2 (0.54)
1.2 (0.54)

Flow*
Saturated
Element
scfm (dm3/s)
21.2 (10.0)
21.2 (10.0)
21.2 (10.0)

Flow*
Model Numbers Dry
mech. service indicator,
Element
automatic drain, metal bowl
scfm (dm3/s)
w/ liquid level indicator
28 (13)
F73C-2AD-AD0
34 (16)
F73C-3AD-AD0
37 (17)
F73C-4AD-AD0

Automatic Drain

Manual Drain

Operation

*Approximate flow at 100 psig (6.3 bar) inlet pressure and 3.0 psid (0.2 bar)
pressure drop. Dry flows good only for systems with all oil, water, and other
aerosols removed.

Options - Select the desired filter from the preceding order table, then change
the model number as shown in the following diagram to obtain the desired option.
Also see Product Numbering Chart on page 77 for additional options.

F73C - -
Optional Threads
B ISO Rc taper
G ISO G parallel

Optional Bowl
T Transparent
P Transparent with guard

Standard Service Indicator


E With electrical service indicator
N Without service indicator

Optional Drain
Q 1/4 turn manual

Service Kits
Seal and gasket kit: 4380-602
Liquid level indicator repair kit: 4380-020
Filter element, (coalescing): 4444-01
Manual drain: 619-50
Automatic drain: 4000-51R
NOTE
For maximum service life, install a general purpose filter with a 5m element
upstream of the oil removal filter.

14

Littleton, CO USA

For accessories see pages 72 thru 75.

Phone 303-794-2611

Fax 303-795-9487

1/98

F73C
Performance Characteristics

psid

bar d

Flow Curve, F73C (Oil Removal)


Port Size: 3/8"
Filter Element: Coalescing, Saturated
Inlet Pressure psig
bar

0.4

90
6.3
120
8.3

0.2

Saturated
Element

0.1
1

0
0
0

12
4

16

6
AIR FLOW

20
8

scfm
10

dm3/s

psid

Flow Curve, F73C (Oil Removal)


Port Size: 3/8"
Filter Element: Coalescing, Dry
Inlet Pressure psig
bar

0.4

PRESSURE DROP

Body: Aluminum
Bowl:
Transparent: Polycarbonate
Transparent with guard: Polycarbonate, steel guard
Metal: Aluminum
Metal bowl liquid level indicator lens: Transparent nylon
Element: Synthetic fiber and polyurethane foam
Elastomers: Neoprene and nitrile
Mechanical service indicator materials:
Body: Transparent nylon
Internal parts: Acetal
Spring: Stainless steel
Elastomers: Nitrile

40
2.8

0.3

15
1.0

Materials

15
1.0

5
PRESSURE DROP

Fluid: Compressed air


Maximum pressure
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating temperature*
Transparent bowl: 0 to 125F (-20 to 50C)
Metal bowl: 0 to 150F (-20 to 65C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Maximum flow for 3/8'' ported filters at 90 psig (6.3 bar) inlet pressure to maintain
consistent oil removal performance: 21.2 scfm (10 dm3/s.
Particle removal down to 0.01 m.
Air quality: Within ISO 8573-1, Class 1 (particulates) and Class 2 (oil content)
Maximum remaining oil aerosol content of air leaving the filter: 0.01 ppm at 70 F
(21C) with an inlet concentration of 17 ppm.
Manual drain connection: 7/16-24 UNS male for 1/4" tube nut and ferrule
Automatic drain connection: Accepts 1/8 PTF and ISO R1/8
Automatic drain operating conditions: Float operated
Bowl pressure required to close drain: Greater than 5 psig
(0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 0.2 scfm (0.1 dm3/s)
Manual operation: Depress pin inside drain outlet to drain bowl
Recommended prefilter: General purpose filter with a 5m element

bar d

Technical Data

90
6.3

40
2.8

120
8.3

0.3
4

0.2

Dry Element
2
0.1
1

0
0
0

16

24
12

32

40
16

scfm
20

dm3/s

AIR FLOW

Dimensions in Inches (mm)


* Minimum clearance required to remove bowl.

2.45 (62)

1.22 (31)

2.68 (68)

6.15 (156)

8.50 (216) *

5.80 (147)

8.15 (207) *

1.00 (25)

2.36 (60)

Mechanical
Service
Indicator

Automatic Drain
1/4 Turn Manual Drain

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

15

F74C and F74H Oil Removal Filters


3/8", 1/2", 3/4" Port Sizes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.
High efficiency particle and oil removal, within ISO
8573-1: Class 1.-.2. See Technical Data.
Highly visible, prismatic liquid level indicator lens.
Patented quarter turn manual drain.
Standard mechanical service indicator turns from
green to red when the filter element needs to be
replaced.
Optional electrical service indicator provides electrical
output when the filter element needs to be replaced.
Quick release bayonet bowl.
Patented quarter turn manual drain.

ISO Symbols
Ordering Information
Standard Models
Port
Size Body and
PTF Element
3/8" Standard
1/2" Standard
1/2" High Flow
3/4" High Flow

Model Numbers Flow *


Flow *
Service life
Saturated
Dry
indicator, automatic
Element
Element
drain, metal bowl with
scfm (dm3/s) scfm (dm3/s) liquid level indicator.

Weight
lbs.(kg)
1.88
1.84
2.45
2.40

(0.85)
(0.83)
(1.11)
(1.10)

20
35
60
60

(7)
(17)
(28)
(28)

70
75
100
120

(33)
(35)
(47)
(57)

F74C-3AD-AD0
F74C-4AD-AD0
F74H-4AD-AD0
F74H-6AD-AD0

Automatic Drain

Manual Drain

Operation

* Approximate flow at 100 psig (6.9 bar) inlet pressure and 5.0 psid (0.3 bar)
pressure drop. Dry flows good only for systems with all oil, water, and other
aerosols removed.

Options - Select the desired filter from the preceding order table, then change
the model number as shown in the following diagram to obtain the desired option.
Also see Product Numbering Chart on page 77 for additional options.

F74C - -
Optional Threads
B ISO Rc taper
G ISO G parallel
Standard Service Indicator
N Without service indicator
E With electrical service indicator

Optional Bowl
P Transparent with metal guard
Optional Drain
Q 1/4 turn manual

Service Kits
Seal and gasket kit: 4380-730
Liquid level indicator repair kit: 4380-050
Filter element, standard: 4344-01
Filter element, high flow: 4344-02
Manual drain: 619-50
Automatic drain: 3000-10
NOTE
For maximum service life, install a general purpose filter with a 5m element
upstream of the oil removal filter.

16

Littleton, CO USA

For accessories see pages 72 thru 75.

Phone 303-794-2611

Fax 303-795-9487

1/98

F74C and F74H


Performance Characteristics
Saturated Elements

Pressure Drop

.4

Materials
Body: Aluminum
Bowl
Transparent: Polycarbonate with zinc bowl guard
Metal: Aluminum
Metal bowl liquid level indicator lens: Transparent nylon
Element: Synthetic fiber and polyurethane foam
Elastomers: Nitrile and neoprene
Service indicator
Body: Transparent nylon
Internal Parts: Acetal
Spring: Stainless steel
Elastomers: Nitrile

90
6.2

120
8.3

150
10.3

Saturated
Element

.2
2

10

20

30

10

40

scfm

50

15
Air Flow

25

dm3/s

50

dm3/s

120
8.3

150
10.3

20

.4

.3

psid

Flow Curve, F74H (High Flow Element for Oil Removal)


Port Size: 1/2"
Filter Element: Coalescing, Saturated

Inlet Pressure psig 25 40


bar 1.7 2.8

60
4.1

120
8.3

90
6.2

Saturated
Element

.2
2

0
0

20

40

10

20

60

80

30
Air Flow

scfm

100
40

Dry Elements

.4

psid

bar,d

Flow Curve, F74C (Standard Element for Particle Removal)


Port Size: 1/2"
Filter Element: Coalescing, Dry
40
2.8

Inlet Pressure psig


bar

60
4.1

90
6.2

2.89
(74)

2.36
(60)

Pressure Drop

180
12.5
.3

Dry Element

.2
2

1.00 (25)

.1

3.15
(80)

0
0

8.44 (215)
Automatic Drain

1.00 (25)
11.79* (299)
Manual Drain

9.04 (230)
1/4 Turn
Manual Drain

40
20

60

80

scfm

100

30
Air Flow

40

50

dm3/s

Flow Curve, F74H (High Flow Element for Particle Removal)


Port Size: 1/2"
Filter Element: Coalescing, Dry

6.35 (161)
Automatic Drain
Pressure Drop

.4

6.95 (177)
1/4 Turn
Manual Drain

20
10

.3

psid

11.19* (284)
Automatic Drain

bar,d

2.36
(60)

9.70* (246)
Manual Drain

60
4.1

40
2.8

.1

3.15
(80)

9.10* (231)
Automatic Drain

Inlet Pressure psig 25


bar 1.7

.1

Dimensions in Inches (mm)


* Minimum clearance required to remove bowl.

1.45
(37)

.3

psid

bar,d

Flow Curve, F74C (Standard Element for Oil Removal)


Port Size: 1/2"
Filter Element: Coalescing, Saturated

Pressure Drop

Fluid: Compressed air


Maximum inlet pressure
Transparent bowl: 150 psig (10.3 bar)
Metal bowl: 250 psig (17.2 bar)
Operating temperature
Transparent bowl: 0 to 125F (-18 to 52C)
Metal bowl: 0 to 150F (-18 to 70C)
Air Quality: Within ISO 8573-1, Class 1.-2.
Particle removal down to 0.01 m.
Maximum remaining oil aerosol content of air leaving the filter: 0.01 ppm at 70 F
(21C) with an inlet concentration of 17 ppm.
Manual drain connection: 7/16-24 UNS male (for 1/4" tube nut and ferrule)
Automatic drain connection: Accepts 1/8 PTF
Automatic drain operating conditions: Float operated
Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 2.0 scfm (1.0 dm3/s)
Manual operation: Depress pin inside drain outlet to drain bowl.
Maximum pressure drop across filter for efficient operation: 10 psid
(0.69 bar)
NOTE
Water vapor and oil vapor will pass through these filters and could condense into
liquid form downstream as air temperature drops. Install a Norgren air dryer and oil
vapor removal filter if water and oil vapor could have a detrimental effect on the
application.

bar,d

Technical Data

Inlet
psig
Pressure bar

25
1.7

40 60
2.8 4.1

90
6.2

120 150
8.3 10.3

180
12.5

Dry Element

.2
2
.1

0
0

1/98

Littleton, CO USA

Phone 303-794-2611

40
20

80
40

120
60
Air Flow

Fax 303-795-9487

160

200
80

scfm
100 dm3/s

17

F74V Oil Vapor Removal Filters


3/8", 1/2", and 3/4" Port Sizes
Excelon design allows in-line or modular
installation with other 72, 73, and 74 Series
products.
Activated carbon cartridge filter element
adsorbs oil vapors and removes most
hydrocarbon odors.
Filter and element design optimizes air velocity
and contact time to reduce oil content of air
leaving the filter to 0.003 ppm at 70F (21C).
See NOTE at bottom of page.
Long service life of carbon cartridge element.
F74C and F74V combinations provide air quality
within ISO 8573-1: Class 1.-.1.
Quick release bayonet bowl.

Ordering Information

ISO Symbols

Standard Models
Port
Size
PTF

Weight Flow *
lbs. (kg)

scfm (dm3/s)

Model Numbers
Closed bottom metal bowl
without liquid level indicator.

3/8"
1/2"
3/4"

2.54 (1.15)
2.51 (1.14)
2.46 (1.12)

21 (10)
21 (10)
21 (10)

F74V-3AN-EMA
F74V-4AN-EMA
F74V-6AN-EMA

Closed Bottom

Operation

* Approximate flow at 100 psig (6.9 bar) inlet pressure and 5 psid (0.3 bar)
pressure drop.

Options - Select the desired filter from the preceding order table, then change
the model number as shown in the following diagram to obtain the desired option.
Also see Product Numbering Chart on page 78 for additional options.

F74V-N-EMA
Optional Threads
B ISO Rc taper
G ISO G parallel

Service Kits
Seal and gasket kit: 4380-750
Filter element: 4341-01
NOTE
Oil vapor removal filters must be protected upstream by an oil removal filter. Select
a NORGREN oil removal filter with equivalent pipe size and flow capacity equal to
or greater than the vapor removal filter. See p. 16 for F74C filter.

For accessories see pages 72 thru 75.

18

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

F74V
Technical Data

Performance Characteristics

Materials
.4

Pressure Drop

Body: Aluminum
Bowl: Aluminum
Element: Activated carbon and aluminum
Elastomers: Nitrile and neoprene

.3

psid

Flow Curve, F74V


Port Size: 1/2"
Filter Element: Adsorbing
bar,d

Fluid: Compressed air


Maximum inlet pressure: 250 psig (17.2 bar)
Operating temperature: 0 to 150F (-18 to 66C)
Maximum pressure drop across filter for efficient operation: 10 psid (0.69 bar)

Inlet
psig 25
Pressure bar 1.7

40
2.8

60
4.1

90 120 150 180


6.2 8.3 10.3 12.5

.2
2
.1

Dimensions in Inches (mm)

0
0

*Minimum clearance required to remove bowl.

10
5

20
10

30
15
Air Flow

40

scfm

50
20

25

dm3/s

2.89
(74)
1.45
(37)

3.15
(80)
1.00 (25)

11.03*
(280)

1/98

8.28
(210)

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

19

R72G/R/M Pressure Regulator


Standard, Reverse Flow, and Manifolding
Regulators in 1/4" and 3/8" Port Sizes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.
Balanced valve design minimizes effect of variation
in the inlet pressure on the outlet pressure.
Standard relieving models allow reduction of
downstream pressure when the system is
dead-ended. Non-relieving models optional.
Push to lock adjusting knob with tamper resistant
accessory.
High flow capacity with full flow gauge ports.
Reverse flow models available for use in applications
where air must be exhausted back through the
regulator (i.e., downstream of cycling valves).
Manifolding models typically allow up to six
regulators to be connected without a booster signal.

Ordering Information

ISO Symbols

Standard Models

Port
Size
PTF

Weight
lbs. (kg)

1/4"
3/8"

0.79 (0.36)
0.79 (0.36)

Model Numbers - Relieving diaphragm, with gauge.


Outlet Pressure Adjustment Range*, unidirectional flow
Knob Adjustment
Knob Adjustment
5 to 60 psig
5 to 150 psig
(0.3 to 4 bar)
(0.3 to 10 bar)
R72G-2AK-RFG
R72G-3AK-RFG

R72G-2AK-RMG
R72G-3AK-RMG

Relieving

Nonrelieving

Operation

* Do not use these regulators to control pressures outside of the specified ranges.

Options - Select the desired regulator from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 79 for additional options.

R72G - -
Flow Type
G Standard
R Reverse
M Manifold

Standard Gauge
N Without gauge
Optional Diaphragm
N Nonrelieving

Optional Threads
B ISO Rc taper
G ISO G parallel
Optional Adjustment
T T-handle

Service Kits
Relieving 4381-500
Nonrelieving 4381-501

For accessories see pages 72 thru 75.

20

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

R72G/R/M
Technical Data

bar,g

psid

Performance Characteristics

Fluid: Compressed air


Maximum Pressure: 300 psig (20 bar)
Operating Temperature*:
0 to 150F (-18 to 65C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Approximate flow of 75 scfm (35.4dm3/s) at 150 psig (10 bar) inlet pressure,
90 psig (6.3 bar) set pressure and a drop of 15 psig (1 bar) from set.
Gauge Ports:
1/8" PTF with PTF main ports
1/8" ISO Rc with ISO Rc main ports
1/8" ISO Rc with iSO G main ports

120

Outlet Pressure

Flow Curve, R72


Port Size: 1/4"
Inlet Pressure: 150 psig (10 bar)
Range: 5.0 to 150 psig (0.3 to 10 bar)

80

4
40
2

20

Materials

Dimensions in Inches (mm)


Panel mounting hole diameter: 1.57" (40 mm)
Panel thickness: 0.16" (4 mm) maximum

Outlet Pressure

dm3/s

4
40

10

20
10

30

bar g
OUTLET PRESSURE

1.31 (33)

40

15
Air Flow

psig

scfm

50
20

50

dm3/s

Flow Curve, R72M


Port Size: 3/8''
Inlet Pressure: 150 psig (10 bar)
Range: 5.0 to 150 psig (0.3 to 10 bar)

100

4.03 (102)

1.01 (26)

2.88 (73)
1.31 (33)

1.01 (26)

50

80

1.98 (50)

scfm

100
40

1.38 (35)

1.38 (35)

1.91 (48)

1.91 (48)

2.48 (63)

80

30
Air Flow

Flow Curve, R72


Port Size: 1/4"
Inlet Pressure: 100 psig (7 bar)
Range: 5.0 to 150 psig (0.3 to 10 bar)

120

60

20

psid

bar,g

Body: Zinc
Bonnet: Acetal
Valve: Brass
Elastomers: Nitrile
Bottom Plug: Acetal

40

10

6
80

60

40
2
20

1.98 (50)

0
0

20

40

10

60

20

30

80

100
40

120 scfm
50

dm3/s

AIR FLOW

Manifold Regulators
Typical Manifold Regulator Application

2.48 (63)
OUTLET
PRESSURE
2.36 (60)

2.36 (60)
1.89 (48)

1/4" OR 3/8"
INLET PORT

1/4" OR 3/8"
INLET PORT

1.89 (48)

1/8"
GAUGE PORT

Booster signal

Pressure
in

R72M

R72M

R72M

R72M

R72M

R72M

1/4"
OUTLET PORT

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

21

R73G/R Pressure Regulators


1/4" 3/8", 1/2"Port Sizes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.
Balanced valve design minimizes effect of variation
in the inlet pressure on the outlet pressure.
Standard relieving models allow reduction of
downstream pressure when the system is
dead-ended. Non-relieving models optional.
Push to lock adjusting knob with tamper resistant
accessory.
High flow capacity with full flow gauge ports.
Reverse flow models available for use in applications
where air must be exhausted back through the
regulator (i.e., downstream of cycling valves).

Ordering Information
ISO Symbols

Standard Models

Port
Size
PTF

Weight
lbs. (kg)

1/4"
3/8"
1/2"

1.1 (0.48)
1.1 (0.48)
1.1 (0.48)

Model Numbers - Relieving diaphragm, with gauge.


Outlet Pressure Adjustment Range*, unidirectional flow
Knob Adjustment
Knob Adjustment Knob Adjustment
5 to 60 psig
5 to 150 psig
10 to 250 psig
(0.3 to 4 bar)
(0.3 to 10 bar)
(0.7 to 17 bar)
R73G-2AK-RFG
R73G-3AK-RFG
R73G-4AK-RFG

R73G-2AK-RMG
R73G-3AK-RMG
R73G-4AK-RMG

R73G-2AK-RSG
R73G-3AK-RSG
R73G-4AK-RSG

Relieving

Non relieving

Operation

* Do not use these regulators to control pressures outside of the specified


ranges.

Options - Select the desired regulator from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 79 for additional options.

R73G - -
Flow Type
G Standard
R Reverse
Optional Threads
B ISO Rc taper
G ISO G parallel

Standard Gauge
N Without gauge
Optional Diaphragm
N Nonrelieving

Optional Adjustment
T T-handle

Service Kits
Relieving 4381-600
Nonrelieving 4381-601

22

For accessories see pages 72 thru 75.

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

R73G/R

psig

Port Size: 3/8"


Inlet Pressure: 150 psig (10 bar)
Range: 5 to 150 psig (0.3 to 10 bar)

100
OUTLET PRESSURE

Fluid: Compressed air


Maximum pressure: 300 psig (20 bar)
Operating temperature*:
0 to 175F (-20 to 80C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Approximate flow at 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure
and a drop of 15 psig (1 bar) from set: 127 scfm (60 dm3/s)
Gauge ports:
14 PTF with PTF main ports
ISO Rc1/4 with ISO Rc main ports
ISO Rc1/8 with ISO G main ports

bar

Performance Characteristics

Technical Data

6
80

60

40
2
20

Materials
Body: Aluminum
Bonnet : Aluminum
Valve: Brass
Elastomers: Nitrile
Bottom plug: Acetal

Dimensions in Inches (mm)

40
20

80
40

120

160

60
AIR FLOW

80

200

scfm

100

dm3/s

Port Size: 3/8"


Inlet Pressure: 100 psig (7 bar)
Range: 5 to 150 psig (0.3 to 10 bar)

OUTLET PRESSURE

100

Panel mounting hole diameter: 1.89" (48 mm)


Panel thickness: 0.06" to 0.25" (2 to 6 mm)
2.68 (68)

6
80

60

40
2

2.45 (62)

1.22 (31)

psig

bar

20

0
0

2.20 (56)

20
10

40
20

60
30

80

100
40

scfm
50

dm3/s

AIR FLOW

1/98

4.04 (103)

96 (3.80)

0.45 (12)

1.22
(31)

1.54 (39)

2.00 (50)

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

23

R74G Pressure Regulators


3/8", 1/2" and 3/4" Port Sizes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.
Balanced valve design minimizes effect of variation
in the inlet pressure on the outlet pressure.
Standard relieving models allow reduction of
downstream pressure when the system is
dead-ended. Non-relieving models optional.
Push to lock adjusting knob with tamper resistant
accessory.
High flow capacity with full flow gauge ports.
Reverse flow models available for use in applications
where air must be exhausted back through the
regulator (i.e., downstream of cycling valves).

Ordering Information

ISO Symbols

Standard Models

Port
Size
PTF

Weight
lbs.kg

3/8"
1/2"
3/4"

1.80 (0.82)
1.77 (0.80)
1.73 (0.78)

Model Numbers - Relieving diaphragm, with gauge.


Outlet Pressure Adjustment Range *
Knob Adjustment Knob Adjustment T-Handle Adjustment
5 to 60 psig
5 to 150 psig
10 to 250 psig **
(0.3 to 4 bar)
(0.3 to 10 bar)
(0.7 to 16 bar)
R74G-3AK-RFG
R74G-4AK-RFG
R74G-6AK-RFG

R74G-3AK-RMG
R74G-4AK-RMG
R74G-6AK-RMG

R74G-3AT-RSG
R74G-4AT-RSG
R74G-6AT-RSG

Relieving

Nonrelieving

Operation

* Do not use these regulators to control pressures outside of the specified ranges.
** Regulators with the 250 psig spring are not available with the knob adjustment.

Options - Select the desired regulator from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 79 for additional options.

R74 - -
Optional Flow
R Reverse flow
Optional Threads
B ISO Rc taper
G ISO G parallel
Optional Adjustment
T T-handle

Standard Gauge
N Without gauge
Optional Diaphragm
N Nonrelieving

Service Kits
Seal and gasket kit for relieving regulators : 4381-700
Seal and gasket kit for nonrelieving regulators : 4381-701

For accessories see pages 72 thru 75.

24

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

R74G
Technical Data

psig

bar,g

Performance Characteristics
Flow Curve, R74
Port Size: 1/2''
Inlet Pressure: 150 psig (10 bar)
Outlet Pressure: 5.0 to 150 psig (.3 to 10 bar)

120

Outlet Pressure

Fluid: Compressed air


Maximum inlet pressure: 300 psig (20.7 bar)
Operating temperature*:
0 to 175F (-18 to 79C).
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Approximate flow at 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure
and a drop of 15 psig (1 bar) from set: 225 scfm (106 dm3/s)
Gauge ports:
1/4" PTF with PTF main ports.
1/4" ISO Rc with ISO Rc main ports.
1/8" ISO Rc with ISO G main ports.

80

4
40
2

Body: Aluminum
Bonnet: Aluminum
Valve: Brass
Elastomers: Nitrile
Bottom Plug: Acetal

Outlet Pressure

Dimensions in Inches (mm)


Panel mounting hole diameter: 2.06" (52mm)
Panel thickness: 0.06" to 0.25" (2 to 6 mm)

40

80
40

20

psig

0
0

bar,g

Materials

120

200

160

scfm

100 dm3/s

80

60
Air Flow

Flow Curve, R74


Port Size: 1/2''
Inlet Pressure: 100 (7 bar)
Outlet Pressure: 5.0 to 150 psig (.3 to 10 bar)

120

80

4
40
2

1.45
(37)

2.89
(74)
1.45
(37)

2.20
(56)

3.15
(80)

0
0

40
20

80
40

120
60
Air Flow

200

160
80

scfm

100 dm3/s

2.20
(56)

3.15
(80)

1.69
(43)

1.69
(43)

4.98
(127)

1/98

2.89
(74)

5.95
(151)

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

25

B72G General Purpose Filter/Regulator


1/4" and 3/8" Port Sizes
Excelon design allows in-line or modular installation with
other 72, 73, and 74 Series products.
Combines the functions of a filter and pressure regulator
into one compact, space saving unit.
High efficiency water and particle removal.
Highly visible, prismatic liquid level indicator lens
Quick release bayonet bowl
Balanced valve design minimizes effect of variation in the
inlet pressure on the outlet pressure
Standard relieving models allow reduction of downstream
pressure when the system is dead-ended. Non-relieving
models options.
High flow capacity with full flow gauge ports
Low torque, non-rising pressure adjustment knob or
sturdy T-handle provide easy hand adjustment at any
pressure. The knob has an integral locking device which
can be made tamper resistant with the addition of a
tamper resistant kit.

ISO Symbols

Ordering Information
Standard Models
Model Numbers - Automatic drain, knob adjustment, 2.2 oz. transparent bowl without
guard, 40m element, relieving diaphragm.
Port
Outlet Pressure Adjustment Range*
Size
Weight
5 to 60 psig
5 to 150 psig
PTF
lbs.(kg)
(0.3 to 4 bar)
(0.3 to 10 bar)
1/4"
3/8"

1.15 (0.52)
1.15 (0.52)

B72G-2AK-AL3-RFG
B72G-3AK-AL3-RFG

Automatic, and Semiautomatic


Drain, Relieving

Manual Drain, Relieving

Automatic, and Semiautomatic


Drain, Nonrelieving

Manual Drain, Nonrelieving

B72G-2AK-AL3-RMG
B72G-3AK-AL3-RMG

* Do not use these filter/regulators to control pressures outside of the specified


ranges.

Options - Select the desired filter/regulator from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 80 for additional options.

Operation

B72G - - -
Optional Threads
B ISO Rc taper
G ISO G parallel
Optional Adjustment
T T-handle
Optional Drain
Q 1/4 turn manual
S Semiautomatic

Standard Gauge
N Without gauge
Optional Diaphragm
N Nonrelieving
Optional Element
1 5m
Optional Bowl
D Metal with liquid level
indicator*
W 2.2 oz. transparent with
guard

*Auto drain not available with D bowl option. For other bowl options (shorter and
lower 1.9 oz. capacity) consult factory .

Service Kits
Seal and gasket kit for relieving filter/regulators: 4383-500
Seal and gasket kit for nonrelieving filter/regulators: 4380-501
Liquid level indicator repair kit: 4380-030
Filter element, 5m: 5925-03
Filter element, 40m: 5925-02
Manual drain: 619-50
Semiautomatic drain: 5379-50
Automatic drain: 4000-50R

26

Littleton, CO USA

For accessories see pages 72 thru 75.


Phone 303-794-2611

Fax 303-795-9487

1/98

B72G

NOTE
Water vapor will pass through these units and could condense into liquid form
downstream as air temperature drops. Install a Norgren air dryer if water
condensation could have a detrimental effect on the application.

Outlet Pressure

psid

bar,g

Performance Characteristics

120

80

40
2

40

psid

20

60

80

30
Air Flow

scfm

100
40

50

Flow Curve, B72


Port Size: 1/4''
Inlet Pressure: 100 psig (7 psig)
Range: 5.0 to 150 psig (0.3 to 10 bar)
Element: 40 m

120

80

0
0

10

20
10

30

40

15
Air Flow

scfm

50
20

50

2.48 (63)

1.9 ounce bowl with 1/4 turn


manual drain.

Phone 303-794-2611

1.38 (35) 1.91 (48)


1.01 (26)

1.38 (35) 1.91 (48)

5.27 (134) *

7.27 (185) minimum clearance


required to remove bowl*

5.27 (134) *

2.89 (73)

1.01 (26)
7.27 (185) minimum clearance
required to remove bowl*

5.43 (138) **

Littleton, CO USA

dm3/s

3.73 (95)

1.98 (50)

2.2 ounce bowl with


automatic drain

dm3/s

40

2.89 (73)

1.01 (26)

7.43 (189) Minimum clearance


required to remove bowl**

10

Body: Zinc
Bonnet: Acetal
Valve: Brass
Bowl:
Transparent Polycarbonate
Transparent with guard Polycarbonate, Zinc guard
Metal Zinc
Metal bowl liquid level indicator lens: Transparent nylon
Element: Sintered polypropylene
Elastomers: Neoprene & nitrile

1/98

20

Materials

Dimensions in Inches (mm)


Panel mounting hole diameter: 1.57" (40 mm)
Panel thickness: 0" to 0.16" (0 to 4 mm

Flow Curve, B72


Port Size: 1/4"
Inlet Pressure: 150 psig (10 bar)
Range: 5 to 150 psig (0.3 to 10 bar)
Element: 40m

bar,g

Fluid: Compressed air


Maximum Inlet Pressure
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating Temperature*
Transparent bowl: 0 to 125F (-18 to 50C)
Metal bowl: 0 to 150F (-18 to 65C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Air Quality: Within ISO 8573-1, Class 3 and Class 5
Approximate flow at 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure
and a drop of 15 psig (1 bar) from set: 80 scfm (38 dm3/s)
Manual drain connection: 7/16-24 UNS male for 1/4" tube nut and ferrule
Semiautomatic drain connection: Push on 5/16" (8mm) ID tube
Semiautomatic drain operating conditions: Pressure operated
Bowl pressure required to close drain: Greater than 1.5 psig (0.1 bar)
Bowl pressure required to open drain: Less than 1.5 psig (0.1 bar)
Minimum air flow required to close drain: 1 scfm (0.5 dm3/s)
Manual operation: Lift stem to drain bowl
Automatic drain connection: Accepts 1/8PTF and ISO R1/8
Automatic drain operating conditions: Float operated
Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 0.2 scfm (0.1 dm3/s)
Manual operation: Depress pin inside drain outlet to drain bowl
Gauge Ports:
1/8" PTF with PTF main ports
1/8" ISO Rc with ISO Rc main ports
1/8" ISO Rc with iSO G main ports

Outlet Pressure

Technical Data

1.9 ounce bowl with 1/4 turn


manual drain.

Fax 303-795-9487

27

B73G General Purpose Filter/Regulator


1/4", 3/8", 1/2" Port Sizes
Excelon design allows in-line or modular installation with
other 72, 73, and 74 Series products.
Combines the functions of a filter and pressure regulator into
one compact, space saving unit.
High efficiency water and particle removal.
Highly visible, prismatic liquid level indicator lens
Quick release bayonet bowl
Balanced valve design minimizes effect of variation in the
inlet pressure on the outlet pressure
Standard relieving models allow reduction of downstream
pressure when the system is dead-ended. Non-relieving
models options.
High flow capacity with full flow gauge ports
Low torque, non-rising pressure adjustment knob or sturdy
T-handle provide easy hand adjustment at any pressure. The
knob has an integral locking device which can be made
tamper resistant with the addition of a tamper resistant kit.

ISO Symbols

Ordering Information
Standard Models
Model Numbers - Automatic drain, knob adjustment, metal bowl with liquid level
indicator, 40m element, relieving diaphragm, gauge.
Port
Outlet Pressure Adjustment Range*
Size Weight
5 to 60 psig
5 to 150 psig
10 to 250 psig
PTF lbs.(kg)
(0.3 to 4 bar)
(0.3 to 10 bar)
(.9 to 17 bar)
1/4" 1.5 (0.7) B73G-2AK-AD3-RFG
3/8" 1.5 (0.7) B73G-3AK-AD3-RFG
1/2" 1.5 (0.7) B73G-4AK-AD3-RFG

B73G-2AK-AD3-RMG
B73G-3AK-AD3-RMG
B73G-4AK-AD3-RMG

Automatic Drain, Relieving

Manual Drain, Relieving

Automatic Drain, Non-Relieving

Manual Drain, Non-Relieving

B73G-2AK-AD3-RSG
B73G-3AK-AD3-RSG
B73G-4AK-AD3-RSG

* Do not use these filter/regulators to control pressures outside of the specified


ranges.

Options - Select the desired filter/regulator from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 80 for additional options.
B73G - - -
Optional Threads
B ISO Rc taper
G ISO G parallel
Optional Adjustment
T T-handle
Optional Drain
Q 1/4 turn manual

Standard Gauge
N Without gauge
Optional Diaphragm
N Nonrelieving
Optional Element
1 5m
2 25m
3 40m
Optional Bowl
P Transparent with guard*
T Transparent*

*Filter/Regulators with 250 psig spring are not available with T or P bowls.

Service Kits
Seal and gasket kit for relieving filter/regulators: 4383-600
Seal and gasket kit for nonrelieving filter/regulators: 4380-601
Liquid level indicator repair kit: 4380-020
Filter element, 5m: 4438-01
Filter element, 25m: 4438-02
Filter element, 40m: 4438-03
Manual drain: 619-50
Automatic drain: 4000-51R

28

Littleton, CO USA

For accessories see pages 72 thru 75.

Phone 303-794-2611

Fax 303-795-9487

1/98

B73G
Technical Data

Performance Characteristics

Materials
Body: Aluminum
Bonnet: Aluminum
Valve: Brass
Bowl
Transparent: Polycarbonate
Transparent with guard: Polycarbonate, steel guard
Metal: Aluminum
Metal bowl liquid level indicator lens:
Transparent nylon
Element: Sintered plastic
Elastomers: Neoprene and nitrile

bar

psig

FLOW CHARACTERISTICS
Port Size: 3/8"
Element: 40 m
Inlet Pressure: 150 psig (10 bar)
Range: 5 to 150 psig (0.3 to 10 bar)

OUTLET PRESSURE

100
6
80

60

40
2
20

0
0
0

40

80

20

40

120

160

60

80

200

scfm

100

dm3/s

psig

bar

AIR FLOW

FLOW CHARACTERISTICS
Port Size: 3/8"
Element: 40 m
Inlet Pressure: 100 psig (7 bar)
Range: 5 to 150 psig (0.3 to 10 bar)

100
OUTLET PRESSURE

Fluid: Compressed air


Maximum pressure
Transparent bowl: 150 psig (10 bar )
Metal bowl: 250 psig (17 bar)
Operating temperature*
Transparent bowl: 0 to 125F (-20 to 50C)
Metal bowl: 0 to 175F (-20 to 80C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F (2C).
Approximate flow at 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure
and a drop of 15 psig (1 bar) from set: 106 scfm (50 dm3/s)
Particle removal: 5, 25 or 40m filter element
Air quality: Within ISO 8573-1, Class 3 and Class 5 (particulates)
Manual drain connection: 7/16-24 UNS male for 1/4" tube nut and ferrule
Automatic drain connection: Accepts ISO R1/8 and 1/8PTF
Automatic drain operating conditions: Float operated
Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 0.2 scfm (0.1 dm3/s)
Manual operation: Depress pin inside drain outlet to drain bowl
Gauge ports:
14 PTF with PTF main ports
ISO Rc1/4 with ISO Rc main ports
ISO Rc1/8 with ISO G main ports

6
80

60

40
2
20

0
0
0

20

40

10

20

60
30

80

100
40

scfm
50

dm3/s

AIR FLOW

Dimensions in Inches (mm)


Panel mounting hole diameter: 48 mm (1.89")
Panel thickness: 2 to 6 mm (0.06" to 0.25")

4.04 (103)
6.15 (156)

5.80 (147)

8.50 (216) *

1.22
(31)
8.15 (207) *

2.20 (56)

2.45 (62)

1.22 (31)

2.68 (68)

3.80 (96)

0.45 (12)

* Minimum clearance to remove bowl.

2.00 (50)

Automatic Drain
1/4 Turn Manual Drain

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

29

B74G Filter/Regulator
3/8", 1/2", and 3/4" Port Sizes
Excelon design allows in-line or modular installation with
other 72, 73, and 74 Series products.
Combines the functions of a filter and pressure regulator
into one compact, space saving unit.
High efficiency water and particle removal.
Highly visible, prismatic liquid level indicator lens
Quick release bayonet bowl
Balanced valve design minimizes effect of variation in the
inlet pressure on the outlet pressure
Standard relieving models allow reduction of downstream
pressure when the system is dead-ended. Non-relieving
models options.
High flow capacity with full flow gauge ports
Low torque, non-rising pressure adjustment knob or
sturdy T-handle provide easy hand adjustment at any
pressure. The knob has an integral locking device which
can be made tamper resistant with the addition of a
tamper resistant kit.

ISO Symbols

Ordering Information
Standard Models

Port
Size
PTF

Weight
lbs.(kg)

Model Numbers - Automatic drain, metal bowl with liquid level


indicator, 40m element, relieving diaphragm, with pressure gauge.
Outlet Pressure Adjustment Range *
Knob Adjustment
Knob Adjustment T-Handle Adjustment **
5 to 60 psig
5 to 150 psig
10 to 250 psig
(0.3 to 4 bar)
(0.3 to 10 bar)
(0.7 to 16 bar)

3/8" 2.62 (1.19) B74G-3AK-AD3-RFG


1/2" 2.59 (1.17) B74G-4AK-AD3-RFG
3/4" 2.55 (1.16) B74G-6AK-AD3-RFG

B74G-3AK-AD3-RMG B74G-3AT-AD3-RSG
B74G-4AK-AD3-RMG B74G-4AT-AD3-RSG
B74G-6AK-AD3-RMG B74G-6AT-AD3-RSG

Automatic Drain, Relieving

Automatic Drain, Nonrelieving

Manual Drain, Relieving

Manual Drain, Nonrelieving

Operation

* Do not use these filter/regulators to control pressures outside of the specified


ranges.
** Filter/regulators with 250 psig spring are not available with the knob adjustment or
P bowl.

Options - Select the desired filter/regulator from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 80 for additional options.
B74G - - -
Optional Threads
B ISO Rc taper
G ISO G parallel
Optional Adjustment
T T-handle
Optional Drain
Q 1/4 turn manual

Standard Gauge
N Without gauge
Optional Diaphragm
N Nonrelieving
Optional Element
1 5m
Optional Bowl
P Plastic with metal guard

Service Kits
Seal and gasket kit for relieving filter/regulators: 4383-700
Seal and gasket kit for nonrelieving filter/regulators: 4383-701
Liquid level indicator repair kit: 4380-050
Filter element, 5m: 4338-04
Filter element, 40m: 4338-05
Manual drain: 619-50
Automatic drain: 3000-10

30

Littleton, CO USA

For accessories see pages 72 thru 75.

Phone 303-794-2611

Fax 303-795-9487

1/98

B74G
Technical Data

Outlet Pressure

psig

Flow Curve, B74


Port Size: 1/2''
Inlet Pressure: 150 paig (10 bar)
Outlet Pressure Adjustment Range: 5.0 to 150 psig (.3 to 10 bar)

120

80

4
40
2

40
20

80
40

120

200

160
80

60
Air Flow

scfm

100 dm3/s

psig

bar,g

Outlet Pressure

NOTE
Water vapor will pass through these units and could condense into liquid form
downstream as air temperature drops. Install a NORGREN air dryer if water
condensation could have a detrimental effect on the application.

bar,g

Performance Characteristics

Fluid: Compressed air


Maximum inlet pressure
Transparent bowl: 150 psig (10.3 bar)
Metal bowl: 250 psig (17.2 bar)
Temperature range*
Transparent bowl: 0 to 125F (-18 to 52C)
Metal bowl: 0 to 175F (-18 to 79C)
Air Quality: Within ISO 8573-1, Class 3 and Class 5
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Approximate flow at 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure
and a drop of 15 psig (1 bar) from set: 200 scfm (94 dm3/s).
Automatic drain connection: 1/8 NPTF
Manual drain connection: 7/16-24 UNS male (for 1/4" tube nut and ferrule)
Gauge ports:
1/4" PTF with PTF main ports.
1/4" ISO Rc with ISO Rc main ports.
1/8" ISO Rc with ISO G main ports.
Automatic drain minimum operating pressure: 10 psig (0.69 bar). The drain is open
when the filter is not pressurized and closes when the bowl is pressurized to
approximately 5 psig (0.35 bar). The automatic drain operates when liquid
accumulates above a certain level or when bowl pressure is reduced to zero.

Flow Curve, B74


Port Size: 1/2''
Inlet Pressure: 100 psig (7 bar)
Outlet Pressure Adjustment Range: 5.0 to 150 psig
120

80

4
40

Materials

Body: Aluminum
Bonnet : Aluminum
Valve: Brass
Bowl:
Transparent Polycarbonate with zinc bowl guard
Metal Aluminum
Metal bowl liquid level indicator lens: Transparent nylon
Element: Sintered polypropylene
Elastomers: Neoprene & nitrile

0
0

40
20

80
40

120
60
Air Flow

200

160
80

scfm

100 dm3/s

Dimensions in Inches (mm)


Panel mounting hole diameter: 2.06" (52mm)
Panel thickness: 0.06" to 0.25" (2 to 6 mm)
* Minimum clearance to remove bowl.

1.45
(37)

1.45
(37)

2.89
(74)

2.89
(74)

2.21
(56)
2.21
(56)
3.15
(80)
3.15
(80)

5.95
(151)

4.98
(127)

1.24
(31)

1.24
(31)

1.69
(43)
9.10* (231)
Automatic Drain

9.70* (246)
Manual Drain

1/98

1.69
(43)
6.35 (161)
Automatic Drain

6.95 (177)
1/4 Turn
Manual Drain

9.10* (231)
Automatic Drain

9.70* (246)
Manual Drain

Littleton, CO USA

6.35 (161)
Automatic Drain

6.95 (177)
1/4 Turn
Manual Drain

Phone 303-794-2611

Fax 303-795-9487

31

L72M and L72C Lubricators


Micro-Fog and Oil-Fog Lubricators
1/4" and 3/8" Port Sizes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.
Flow sensor design provides a nearly constant oil/air
ratio over a wide range of air flows.
360 visibility of the sight-feed dome simplifies
installation and adjustment.
Highly visible, prismatic liquid level indicator lens.
Quick release bayonet bowl with patented quarter
turn manual drain.
Micro-Fog and Oil-Fog are both available.
Use Micro-Fog models to lubricate one or more air
driven tools or devices
Use Oil-Fog models to lubricate a single air driven
tool or device

ISO Symbol

Ordering Information
Standard Models
Port
Size
PTF
1/4"
3/8"

Weight
lbs. (kg)
1.08 (0.49)
1.08 (0.49)

Model Numbers - 1/4 turn manual drain,


2.2 oz. transparent bowl without guard.
Micro-Fog
Oil-Fog
L72M-2AP-QLN
L72C-2AP-QLN
L72M-3AP-QLN
L72C-3AP-QLN

With drain

Options - Select the desired lubricator from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 81 for additional options.

Operation

L72C - P - Q
Port Size
2
1/4"
3
3/8"
Optional Threads
B ISO Rc taper
G ISO G parallel

Additional Options
P With pyrex dome
Optional Bowl*
D 1.9 oz. metal with liquid level
indicator
W 2.2 oz.transparent with guard

* For other bowl options consult factory (shorter and lower 1.9 oz. capacity.)

Service Kits
Seal and gasket kit: 4382-500
Liquid level indicator repair kit: 4380-030
Manual drain: 619-50
Micro-Fog
NOTE
Models listed in the order table must not be located downstream of frequently
cycling directional control valves. Order the optional bidirectional Oil-Fog Lubricator
for use under such conditions.

32

Littleton, CO USA

Oil-Fog

For accessories see pages 72 thru 75.

Phone 303-794-2611

Fax 303-795-9487

1/98

L72M/L72C
Technical Data

Performance Characteristics

Fluid: Compressed air


Maximum Pressure
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating Temperature*
Transparent bowl: 0 to 125F (-18 to 50C)
Metal bowl: 0 to 150F (-18 to 65C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Start point (i.e., minimum airflow required for lubricator operation)
Oil-Fog models: 1.0 scfm (0.47 dm3/s) at 90 psig (6.3 bar) inlet pressure
Micro-Fog models: 2.0 scfm (0.94 dm3/s) at 90 psig (6.3 bar) inlet pressure
Approximate flow at 90 psig (6.3 bar) inlet pressure and 5 psid (0.3 bar) pressure
drop: 36 scfm (17 dm3/s)
Nominal Bowl Capacity
Long transparent bowl: 2.2 oz (65 ml)
Short metal bowl: 1.9 oz (56 ml)
Manual Drain Connection: 7/16-24 UNS male for 1/4" tube nut and ferrule
Recommended lubricants: Use a misting type oil rated 50 to 200 SSU (ISO Grade
7 to 46) at 100F (38C). The oils used must be compatible with materials of
construction. Contact your lubricant supplier and the builder of the equipment
to be lubricated to obtain specific lubricant recommendations.

Pressure Drop

.4

.3

psid

bar,d

Flow Curve, L72, Oil-Fog and Micro-Fog


Port Size: 1/4"
Inlet Pressure psig
bar

60
4.1

40
2.8

90
6.3

120
8.3
150
10.3

.2
2
.1

0
0

10
5

20
10

30
15
Air Flow

40

scfm

50
20

25

dm3/s

Materials
Body: Zinc
Bowl:
Transparent: Polycarbonate
Transparent with guard: Polycarbonate, Zinc guard
Metal: Zinc
Metal bowl liquid level indicator lens: Transparent nylon
Sight feed dome: Transparent nylon
Elastomers: Neoprene, nitrile, and Geolast

Dimensions in Inches (mm)


* Minimum clearance required to remove reservoir from unit.
Add 0.56" (14mm) for long (2.2 fluid ounce) reservoir.
** Add 0.56" (14mm) for long (2.2 fluid ounce) reservoir.
Optional pyrex sight feed dome.
1.98 (50)

Short (1.9 fluid ounce) reservoir

1/98

2.51 (64)

5.27 (134)**

8.46 (215)*

5.27 (134)**

8.46 (215)*

0.75 (19)

0.75 (19)

1.63 (41)

2.51 (64)

1.63 (41)

Oil-Fog
Models

1.91 (48)

1.91 (48)

Micro-Fog
Models

1.98 (50)

Short (1.9 fluid ounce) reservoir

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

33

L73M and L73C Lubricators


Micro-Fog and Oil-Fog Tool Lubricators
1/4", 3/8", 1/2" Port Sizes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.
Flow sensor design provides a nearly constant oil/air
ratio over a wide range of air flows.
360 visibility of the sight-feed dome simplifies
installation and adjustment.
Highly visible, prismatic liquid level indicator lens.
Quick release bayonet bowl with patented quarter
turn manual drain.
Micro-Fog and Oil-Fog are both available.
Use Micro-Fog models to lubricate one or more air
driven tools or devices
Use Oil-Fog models to lubricate a single air driven
tool or device

Ordering Information

ISO Symbols

Standard Models
Port
Size
PTF
1/4"
3/8"
1/2''

Weight
lbs. (kg)
1.1 (0.5)
1.1 (0.5)
1.1 (0.5)

Model Numbers - 1/4 turn manual drain,


metal with liquid level indicator
Micro-Fog
Oil-Fog
L73M-2AP-QDN
L73C-2AP-QDN
L73M-3AP-QDN
L73C-3AP-QDN
L73M-4AP-QDN
L73C-4AP-QDN

With Drain

Operation

Options - Select the desired lubricator from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 81 for additional options.

L73C - P - Q
Port
2
3
4

Size
1/4"
3/8"
1/2''

Optional Threads
B ISO Rc taper
G ISO G parallel

Additional Options
P With pyrex sight-feed
dome
Q Quick fill nipple
Optional Bowl
P Transparent with guard
R Metal with Pyrex liquid level
indicator
T Transparent

Service Kits
Seal and gasket kit: 4382-500
Liquid level indicator repair kit: 4380-030
Manual drain: 619-50
NOTE
Models listed in the order table must not be located downstream of frequently
cycling directional control valves. Order the optional bidirectional (74 Series)
Oil-Fog Lubricator for use under such conditions.

34

Littleton, CO USA

For accessories see pages 72 thru 75.

Phone 303-794-2611

Fax 303-795-9487

1/98

L73M/L73C
Technical Data

Typical Performance Characteristics

psid

bar d

Flow Curve, L73, Micro-Fog


Port Size: 3/8''
Inlet Pressure psig
bar

40
2.8

5
PRESSURE DROP

60
4.1

0.3
4

0.2

90
6.3
120
8.3

3
150
10.3

2
0.1
1

0
0
0

20
10

40
20

60

80

30

PRESSURE DROP

Body: Aluminum
Bowl:
Transparent: Polycarbonate
Transparent with guard: Polycarbonate, steel guard
Metal: Aluminum
Metal bowl liquid level indicator lens: Transparent nylon
Sight-Feed dome: Transparent nylon
Elastomers: Neoprene and nitrile

scfm
50

dm3/s

50

dm3/s

psid

Flow Curve, L73, Oil-Fog


Port Size: 3/8''
Inlet Pressure psig
bar
40
2.8

Materials

100
40

AIR FLOW

bar d

Fluid: Compressed air


Maximum pressure:
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating temperature*
Transparent bowl: 0 to 125F (-20 to 50C)
Metal bowl: 0 to 175F (-20 to 80C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Start point (minimum flow required for lubricator operation): 1.5 scfm (0.71 dm3/s)
at 90 psig (6.3 bar) inlet pressure
Maximum recommended flow: 60 scfm (28 dm3/s). Air flows above 60 scfm (28
dm3/s) create excessive air velocity, turbulence, and pressure losses. In
addition, the fog produced by the lubricator will wet out on the pipe walls and will
not be carried by the compressed air to the point of application.
Typical flow with 90 psig (6.3 bar) inlet pressure and 7 psig (0.5 bar) pressure drop:
Micro-Fog models: 138 scfm (65 dm3/s)
Oil-Fog models: 158 scfm (75 dm3/s)
Nominal bowl size: 3.5 ounce (0.1 litre)
Manual drain connection: 7/16-24 UNS male (for 1/4" tube nut and ferrule)
Recommended lubricants: Use a misting type oil rated 50 to 200 SSU (ISO Grade
7 to 46) at 100F (38C). The oils used must be compatible with materials of
construction. Contact your lubricant supplier and the builder of the equipment to
be lubricated to obtain specific lubricant recommendations.

0.3

60
4.1

0.2

90
6.3
120
8.3

3
150
10.3

2
0.1
1

0
0
0

20
10

40
20

60
30
AIR FLOW

80

100
40

scfm

Dimensions in Inches (mm)


* Minimum clearance to remove bowl.
** Optional pyrex sight-feed dome.

1/98

2.74 (70) **
6.15 (156) With Drain

5.38 (137) Closed Bottom

1.00 (25)

10.04 (255) With Drain *

9.29 (236) Closed Bottom *

1.87 (47)

2.45 (62)

1.22 (31)

2.68 (68)

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

35

L74M and L74C Lubricators


3/8", 1/2", and 3/4" Port Sizes
Micro-Fog and Oil-Fog Tool Lubricators
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.
Flow sensor design provides a nearly constant oil/air
ratio over a wide range of air flows.
360 visibility of the sight-feed dome simplifies
installation and adjustment.
Highly visible, prismatic liquid level indicator lens.
Quick release bayonet bowl with patented quarter
turn manual drain.
Micro-Fog and Oil-Fog are both available.
Use Micro-Fog models to lubricate one or more air
driven tools or devices
Use Oil-Fog models to lubricate a single air driven
tool or device

ISO Symbol

Ordering Information
Standard Models
Model Numbers - 1/4 turn manual
drain, 7-oz. metal reservoir with
liquid level indicator.

Port
Size
PTF

Weight *
lbs. (kg)

Flow **
scfm
(dm3/s)

Micro-Fog

Oil-Fog

3/8"
1/2"
3/4"

1.70 (0.77)
1.61 (0.73)
1.56 (0.71)

2.5 to 40 (1.2 to 19.0)


3.5 to 100 (1.7 to 47.0)
3.5 to 100 (1.7 to 47.0)

L74M-3AP-QDN
L74M-4AP-QDN
L74M-6AP-QDN

L74C-3AP-QDN
L74C-4AP-QDN
L74C-6AP-QDN

With drain

Operation

* Lubricators with 1-quart metal bowl: Add 2.01 lbs (0.91 kg).
** Approximate flow at 100 psig (6.9 bar) inlet pressure and 5 psid.

Options - Select the desired lubricator from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 82 for additional options.
L74 - -
Optional Threads
B ISO Rc taper
G ISO G parallel
Optional Flow Type (Oil-Fog Only)
E Bidirectional

Additional Options
Q With quick fill cap
P With pyrex dome
Optional Reservoirs
P 7-oz. transparent with metal guard
A 1-qt. metal with pyrex liquid level
indicator

Service Kits
Seal and gasket kit: 4382-700
Liquid level indicator repair kit: 4380-050
Manual drain: 619-50
NOTE
Models listed in the order table must not be located downstream of frequently
cycling directional control valves. Order the optional bidirectional Oil-Fog Lubricator
for use under such conditions.

36

Littleton, CO USA

Micro-Fog

Oil-Fog

For accessories see pages 72 thru 75.

Phone 303-794-2611

Fax 303-795-9487

1/98

L74M/L74C
Technical data

Performance Characteristics

.4

.3

psid

bar,d

Flow Curve, L74M, Micro-Fog


Port Size: 1/2"

Pressure Drop

Maximum inlet pressure


Transparent reservoir: 150 psig (10.3 bar)
Metal reservoir: 250 psig (17.2 bar)
Operating temperature
Transparent reservoir: 0 to 125F (-18 to 52C)
Metal reservoir :0 to 175F (-18 to 79C)
Manual drain connection: 7/16-24 UNS male (for 1/4" tube nut and ferrule)
Recommended lubricants: Use a misting type oil rated 50 to 200 SSU (ISO Grade 7
to 46) at 100F (38C). The oils used must be compatible with materials of
construction. Contact your lubricant supplier and the builder of the equipment to
be lubricated to obtain specific lubricant recommendations.
Start point (minimum flow required for lubricator operation):
1.5 scfm (0.71 dm3/s) at 90 psig (6.3 bar) inlet pressure
Maximum recommended flow: 60 scfm (28 dm3/s).
Air flows above 60 scfm (28 dm3/s) create excessive air velocity, turbulence, and
pressure losses. In addition, the fog produced by the lubricator will wet out on the
pipe walls and will not be carried by the compressed air to the point of application.
Typical flow with 90 psig (6.3 bar) inlet pressure and 7 psig (0.5 bar) pressure drop
Micro-Fog models: 138 scfm (65 dm3/s)
Oil-Fog models: 158 scfm (75 dm3/s)

Inlet Pressure psig


bar

25
1.7

40
2.8

60
4.1

90
6.2

120
8.3

150
10.3

.2
2
.1

0
0

40

80

20

120

40

160

60
Air Flow

200

scfm
100 dm3/s

80

bar,d

Body: Aluminum
Reservoir
Transparent: Polycarbonate with zinc bowl guard
Metal: Aluminum
Reservoir liquid level indicator lens
7-ounce reservoir: Transparent nylon
1-quart reservoir: Pyrex
Sight-Feed dome: Transparent nylon
Elastomers: Neoprene and nitrile

Pressure Drop

.4

.3

psid

Flow Curve, L74C, Oil-Fog


Port Size: 1/2"

Materials

Inlet Pressure psig


bar

25
1.7

40
2.8

60
4.1

90
6.2

120 150
8.3 10.3

.2
2
.1

Dimensions in Inches (mm)


4.32
(110) Dia.

*Minimum clearance required to remove


bowl.

0
0

3.15
(80)

40
20

80
40

120
60
Air Flow

160

200
80

scfm
100 dm3/s

1.12 (28)
1.00 (25)

1.45
(37)

2.89
(74)

3.15
(80)
1.12 (28)
1.00 (25)

10.95*
(278)

11.90
(303)

20.00*
(508)

6.95
(177)

2.40
(61)

7-Ounce Reservoir

1/98

1-Quart Reservoir

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

37

V72G Pressure Relief Valve


1/4" and 3/8" Port Sizes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.

Helps protect air operated equipment from over


pressure by retarding excessive pressure
build up.
Low torque, non-rising pressure adjustment
knob or sturdy T-handle provides easy hand
adjustment at any pressure. The knob has an
integral locking device which can be made
tamper resistant with the addition of a temper
resistant kit.
New design allows for easy inline installation
with no tee's required (bottom venting).

ISO Symbols

Ordering Information
Standard Models

Inlet Port
Size
PTF

Relief
Port

Weight
lbs. kg

Model Numbers - Without gauge.


Relief Pressure Adjustment Range *
Knob Adjustment
Knob Adjustment
5 to 60 psig
5 to 150 psig
(0.3 to 4 bar)
(0.3 to 10 bar)

1/4"
1/4"
0.73 (0.33)
V72G-2AK-NFN
V72G-2AK-NMN
3/8"
1/4"
0.73 (0.33)
V72G-3AK-NFN
V72G-3AK-NMN
* Do not use these valves to relieve pressures outside of the specified ranges.

Operation

Options - Select the desired relief valve from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 83 for additional options.
V72G - -
Optional Threads
B ISO Rc taper
G ISO G parallel

Optional Gauge
G With gauge

Optional Adjustment
T T-handle

Service Kits
Diaphragm and seal kit: 4209-03

For accessories see pages 72 thru 75.

38

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

V72G

Inlet Pressure

120

80

4
40

Relief Curve, V72


Port Size: 1/4"
Range: 5.0 to 150 psig (0.3 to 10 bar)

Materials

psid

Fluid: Compressed air


Operating Temperature*:
0 to 150F (-18 to 65C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Gauge Port:
1/8" PTF with PTF main ports
1/8" ISO Rc with ISO Rc main ports
1/8" ISO Rc with ISO G main ports
Relief Ports:
1/4" NPT with NPT inlet ports
ISO G with ISO G inlet ports
ISO Rc with ISO Rc inlet ports

bar,d

Performance Characteristics

Technical Data

0
0

10

Body: Zinc
Bonnet: Acetal
Valve: Brass
Elastomers: Neoprene

20
10

30
15
Relief Air Flow

40

scfm

50
20

25

dm3/s

Dimensions in Inches (mm)

1/98

4.03 (102)

1.38 (35)
1.01 (26)

2.88 (73)

1/4" relief
port

1.98 (50)

0.98 (25)

1.98 (50)

0.98 (25)

1.01 (26)

1.38 (35)

1.91 (48)

1.91 (48)

2.48 (63)

1/4" relief
port

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

39

V74G Pressure Relief Valve


3/8", 1/2", and 3/4" Port SIzes
Excelon design allows in-line or modular installation
with other 72, 73, and 74 Series products.

Helps protect air operated equipment from over


pressure by retarding excessive pressure
build up.
Low torque, non-rising pressure adjustment
knob or sturdy T-handle provides easy hand
adjustment at any pressure. The knob has an
integral locking device which can be made
tamper resistant with the addition of a tamper
resistant kit.

Ordering Information

ISO Symbol

Standard Models

Port
Size
PTF

Weight
lbs. kg

Model Numbers - Without gauge.


Relief Pressure Adjustment Range *
Knob Adjustment Knob Adjustment T-Handle Adjustment**
5 to 60 psig
5 to 150 psig
10 to 250 psig
(0.3 to 4 bar)
(0.3 to 10 bar)
(0.7 to 17 bar)

3/8" 1.53 (0.69) V74G-3AK-NFN


V74G-3AK-NMN
V74G-3AT-NSN
1/2" 1.50 (0.68) V74G-4AK-NFN
V74G-4AK-NMN
V74G-4AT-NSN
3/4" 1.47 (0.67) V74G-6AK-NFN
V74G-6AK-NMN
V74G-6AT-NSN
* Relief valve can be adjusted to relieve at pressures in excess of, and less than,
those specified. Do not use these valves to relieve pressures outside of the
specified ranges.
** Relief valves with the 250 psig spring are not available with the knob
adjustment.

Operation

Options - Select the desired relief valve from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 83 for additional options.
V74G - -
Optional Threads
B ISO Rc taper
G ISO G parallel

Optional Gauge
G With gauge

Optional Adjustment
T T-handle

Service Kits
Diaphragm and seal kit: 4384-700

For accessories see pages 72 thru 75.

40

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

V74G
Performance Characteristics

Materials
Body: Aluminum
Bonnet: Aluminum
Valve: Aluminum, nitrile
Elastomers: Neoprene
Bottom Plug: Acetal

Relief Curve, V74


Port Size: 1/2"
Relief Spring Adjustment Range: 5.0 to 150 psig

psig

Maximum Pressure: 300 psig (20 bar)


Temperature Range*: 0 to 175F (-18 to 79C).
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Gauge ports:
1/4" PTF with PTF main ports.
1/4" ISO Rc with ISO Rc main ports.
1/8" ISO Rc with ISO G main ports.

bar,g

Fluid: Compressed air

Inlet Pressure

Technical data

120

80

4
40
2

0
0

40
20

80
40

120
60
Relief Flow

200

160
80

scfm
100 dm3/s

Dimensions in Inches (mm)


Panel mounting hole diameter: 2.06" (52mm)
Panel thickness: 0.06" to 0.25" (2 to 6 mm)

1.45
(37)

2.89
(74)

1.45
(37)

2.20
(56)

2.20
(56)

3.15
(80)

3.15
(80)

1.69
(43)

1.69
(43)

4.98
(127)

1/98

2.89
(74)

5.95
(151)

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

41

T72 Lockout & Shut-off Valves


1/4" and 3/8" Port Sizes
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series
products
Valves can be quickly closed by manually pushing
the slide.
Valves can be locked in closed position only.
T72E 3-port/2-position lockout valves help conform
to OSHA Lockout Regulations. Valves block inlet
air flow and exhaust downstream air in the closed
position. Exhaust outlet is not tapped (yellow slide)
T72B 2-port/2-position shutoff valves block inlet air
flow in the closed position but do not exhaust
downstream air (black slide).
T72T 3-port/2-position shutoff valves block inlet air
flow and exhaust downstream air in the closed
position. Exhaust port is tapped (red slide).
Valves can be quickly closed by manually pushing
the slide.

ISO Symbols

Valves can be locked in the closed position only


with a customer supplied padlock.

Ordering Information

2-Port/2-Position

Standard Models
Port
Size
PTF

Weight
lbs.(kg)

Lockout valve,
yellow slide,
3-Port/2-position
Unthreaded exhaust

1/4"
3/8"

0.79 (0.36)
0.79 (0.36)

T72E-2AA-P1N
T72E-3AA-P1N

Shut-off valve,
black slide,
2-port/2-position
No exhaust outlet

Shut-off valve,
red slide,
3-port/2-position
Threaded exhaust port

T72B-2AA-P1N
T72B-3AA-P1N

T72T-2AA-P1N
T72T-3AA-P1N

Options - Select the desired shutoff valve from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 84 for additional options.

3-Port/2-Position

Operation

IN

OUT

IN

OUT

T72 - A - P1N
Optional Threads for T72 Shutoff Valves
B ISO Rc taper
G ISO G parallel

2-Port/2-Position

Service Kits (includes seals and slide)


Type
T72E (yellow slide)
T72B (black slide)
T72T (red slide)

Part Number
4384-513
4384-511
4384-512

IN

OUT

IN

OUT

EXHAUST

3-Port/2-Position

For accessories see pages 72 thru 75.

42

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

T72
Technical Data

Dimensions in inches (mm)


1.98 (50)
1.91 (48)

Fluid: Compressed air


Maximum Inlet Pressure: 250 psig (17 bar)
Operating Temperature*:
0 to 150F (-20 to 65C)
*Air supply must be dry enough to avoid ice formation at temperatures below 2C
(35F.)
Cv factor from IN to OUT ports: 5.7 *
Optional threaded exhaust port 10-32
Maximum diameter of customer supplied padlock shackle: 3/16" (5 mm)
*Cv factor from OUT to EXHAUST ports on 3-port/2-position valves is 0.2.

Materials

1/98

3.46 (88)

Body: Zinc
Slide: Acetal plastic
Elastomers: Nitrile

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

43

T73 Lockout & Shut-off Valves


1/4", 3/8", 1/2" Port Sizes
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series
products
Valves can be quickly closed by manually pushing
the slide.
Valves can be locked in closed position only.
T73E 3-port/2-position lockout valves help conform
to OSHA Lockout Regulations. Valves block inlet
air flow and exhaust downstream air in the closed
position. Exhaust outlet is not tapped (yellow slide)
T73B 2-port/2-position shutoff valves block inlet air
flow in the closed position but do not exhaust
downstream air (black slide).
T73T 3-port/2-position shutoff valves block inlet air
flow and exhaust downstream air in the closed
position. Exhaust port is tapped (red slide).
Valves can be quickly closed by manually pushing
the slide.
Valves can be locked in the closed position only
with a customer supplied padlock.

ISO Symbols

Ordering Information
2-Port/2-Position

Standard Models
Port
Size
PTF

Weight
lbs.(kg)

Lockout valve,
yellow slide
3-Port/2-position,
Unthreaded exhaust

1/4"
3/8"
1/2"

0.7 (0.3)
0.7 (0.3)
0.7 (0.3)

T73E-2AA-P1N
T73E-3AA-P1N
T73E-4AA-P1N

Shut-off valve,
black slide
2-port/2-position,
no exhaust outlet

Shut-off valve,
red slide
3-port/2-position,
threaded exhaust port

T73B-2AA-P1N
T73B-3AA-P1N
T73B-4AA-P1N

T73T-2AA-P1N
T73T-3AA-P1N
T73T-4AA-P1N

Options - Select the desired shutoff valve from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 84 for additional options.

3-Port/2-Position

Operation

IN

OUT

IN

OUT

T73 - A - P1N
Optional Threads for T73 Shutoff Valves
B ISO Rc taper
G ISO G parallel

2-Port/2-Position

Service Kits (includes seals and slide)


Type
T73E (yellow slide)
T73B (black slide)
T73T (red slide)

Part Number
4384-611
4384-610
4384-612

IN

OUT

IN

OUT

EXHAUST

3-Port/2-Position

For accessories see pages 72 thru 75.

44

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

T73

Dimensions in Inches (mm)


2.13 (54)
2.32 (59)

Fluid: Compressed air


Maximum pressure: 250 psig (17 bar)
Operating temperature*:
0 to +150F (-20 to +65C)
*Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Cv factor:
IN to OUT ports:
1/4" ports: 4.0
3/8" ports: 8.0
1/2" ports: 7.8
OUT to EXHAUST ports on 3-port/2-position valves: 0.2
Exhaust port threads on T73T models: 10-32
Maximum diameter of customer supplied padlock shackle: 5/16" (8 mm)

88 (3.46)

Technical Data

Materials
Body: Zinc
Slide: Acetal plastic
Elastomers: Nitrile

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

45

T74 Lockout & Shut-off Valves


3/8", 1/2", and 3/4"
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series
products
Valves can be quickly closed by manually pushing
the slide.
Valves can be locked in closed position only.
T74E 3-port/2-position lockout valves help conform
to OSHA Lockout Regulations. Valves block inlet
air flow and exhaust downstream air in the closed
position. Exhaust outlet is not tapped (yellow slide)
T74B 2-port/2-position shutoff valves block inlet air
flow in the closed position but do not exhaust
downstream air (black slide).
T74T 3-port/2-position shutoff valves block inlet air
flow and exhaust downstream air in the closed
position. Exhaust port is tapped (red slide).
Valves can be quickly closed by manually pushing
the slide.

ISO Symbol

Valves can be locked in the closed position only


with a customer supplied padlock.
Ordering Information

2-Port/2-Position

Operation

Standard Models (PTF threads)


Port
Size
PTF

Weight
lbs. (kg)

Lockout valve, Yellow


3-Port/2-position,
unthreaded exhaust

3/8"
1/2"
3/4"

0.69 (0.32)
0.65 (0.30)
0.62 (0.28)

T74E-3AA-P1N
T74E-4AA-P1N
T74E-6AA-P1N

3-Port/2/Position

Shut-off valve, Black Shut-off valve, Red


2-Port/2-position,
3-Port/2-position,
no exhaust outlet
threaded exhaust port
T74B-3AA-P1N
T74B-4AA-P1N
T74B-6AA-P1N

T74T-3AA-P1N
T74T-4AA-P1N
T74T-6AA-P1N

Options - Select the desired shutoff valve from the preceding order table, then
change the model number as shown in the following diagram to obtain the desired
option. Also see Product Numbering Chart on page 84 for additional options.

IN

OUT

IN

OUT

2-Port/2-Position

T74 - A - P1N
Optional Threads for T74 Shutoff Valves
B ISO Rc taper
G ISO G parallel
OUT

IN

OUT

Service Kits (includes seals and slide)


Type
T74E (yellow slide)
T74B (black slide)
T74T (red slide)

Part Number
4384-710
4384-711
4384-713

EXHAUST

3-Port/2-Position

For accessories see pages 72 thru 75.

46

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

T74
Dimensions in Inches (mm)

Technical Data
Fluid: Compressed air
Maximum Inlet Pressure: 250 psig (17.2 bar)
Operating Temperature: 0 to 150F (-20 to 66C)
Exhaust port threads on T74T Shut-Off valves:
1/8-27 PTF with PTF main ports
1/8-28 ISO Rc with ISO G and ISO Rc main ports
Cv factor:
IN to OUT ports:
3/8" ports: 7.1
1/2" ports: 8.1
3/4" ports: 7.7
OUT to EXHAUST ports on 3-port/2-position valves: 0.2
Maximum diameter of customer supplied padlock shackle: 5/16" (8 mm)

1.55
(39)

1.22
(31)
OPEN

2.90
(74)

2.74(70)

Materials
Body: Zinc
Slide: Acetal plastic
Elastomers: Nitrile

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

47

72 Series Combination Units Filters


1/4" and 3/8" Port Sizes
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series
products
F72G pre filter and F72C oil removal filter
provide high efficiency oil removal and particle
removal to 0.01 m. Pre filter removes
particulate to 5m. Coalescing filter removes
particles down to 0.01 m. Maximum remaining
oil content of air leaving the filter is 0.01 ppm at
70F (21 C) with an inlet concentration of 17
ppm. Provides air quality within ISO 8573-1:
Class 1.-.2
Service indicator turns from green to red when
the filter element needs to be relaced.
Highly visible, prismatic liquid level indicator
lens.
Quick release bayonet bowl.
Patented quarter turn manual drain.
ISO Symbols

Ordering Information
Standard Models
General Purpose & Coalescing Filters: Automatic drain, 2.2 oz. transparent
bowl, and service life indicator, 5m filter on inlet.
Port
Size
PTF

Body and
Element

Model Number - Inline Units


General Purpose &
Coalescing Filters

1/4"
3/8"

Standard
Standard

H72A-2AB-AL1-NNN-LNN
H72A-3AB-AL1-NNN-LNN

Semiautomatic and
Automatic drains

Manual drain

Operation
General Purpose

Options - Select the desired combination unit from the preceding order table,
then change the model number as shown in the following diagram to obtain the
desired option. Also see Product Numbering Chart on page 85 for additional
options.

Coalescing

72A - - 1 - NNN - N
Optional Lockout Valve
and Quikmount Pipe
Adapters
H Filter-Filter (standard)
J Lockout valve on inlet
of combination.
M Quikmount pipe adapters.
N Lockout valve on inlet
and Quikmount pipe
adapter on outlet.
Port Size
2
1/4"
3
3/8"
Optional Threads
B
ISO Rc Taper
G
ISO G Parallel

Quikclamp Wall Mounting


Brackets
B With brackets
N Without
Coalescing Filter Bowl
D 1.9 oz. metal with liquid level indicator*
W 2.2 oz. transparent with guard
General Purpose Filter Bowl
D 1.9 oz. metal with liquid level indicator*
W 2.2 oz. transparent with guard
General Purpose and Oil Removal Filter
Drain Options
Q 1/4 turn manual
S Semiautomatic

*Auto drain not available with D bowl option. For


other bowl options (shorter and lower 1.9 oz.
capacity) consult factory .

Service Indicator Options


B Service indicator on both filters.
C Service indicator only on coalescing filter.
D Service indicator only on general purpose filter.
N No service indicator.

For accessories see pages 72 thru 75.

Service Kits, Specifications, Materials, and Performance.


See filter pages 6, 7, 12, and 13.

48

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

72 Series Combination Units Filters


Dimensions in Inches (mm)

See pages 7 and 13 for dimensions on individual units.


The optional Quikclamp wall mounting bracket is illustrated on the following combination units.

H72 Combination Units (Listed in Order Table)

J72 Combinations with Lockout Valve (See Alternative Models)

4.22 (108)

6.46 (164)

2.11 (54)

2.11 (54)

2.24 (56)

M72 Combinations with Quikmount Pipe Adapters


(See Alternative Models)

N72 Combinations with Lockout Valve and Quikmount


Pipe Adapter (See Alternative Models)
7.35 (187)

6.00 (152)
4.48 (113)

2.11 (54)

4.48 (113)

2.32 (59)

2.32 (59)

1/98

2.11 (54)

2.32 (59)

2.32 (59)

2.11 (54)

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

49

73 Series Combination Units Filters


1/4", 3/8", 1/2" Port Sizes
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series products
F73G pre filter and F73C oil removal filter provide
high efficiency oil removal and particle removal to
0.01 m. Pre filter removes particulate to 5m.
Coalescing filter removes particles down to 0.01 m.
Maximum remaining oil content of air leaving the
filter is 0.01 ppm at 70F (21 C) with an inlet
concentration of 17 ppm. Provides air quality within
ISO 8573-1: Class 1.-.2
Service indicator turns from green to red when the
filter element needs to be relaced.
Highly visible, prismatic liquid level indicator lens.
Quick release bayonet bowl.
Patented quarter turn manual drain.

Ordering Information

ISO Symbols

Standard Models
General Purpose & Coalescing Filters: Automatic drains, metal bowl with liquid
level indicator, and service life indicator, 5m filter on inlet.
Port
Size
PTF

Body and
Element

Model Number - Inline Units


General Purpose &
Coalescing Filters

1/4"
3/8"
1/2"

Standard
Standard
Standard

H73A-2AB-AD1-NNN-DNN
H73A-3AB-AD1-NNN-DNN
H73A-4AB-AD1-NNN-DNN

Automatic Drain

Options - Select the desired combination unit from the preceding order table,
then change the model number as shown in the following diagram to obtain the
desired option. Also see Product Numbering Chart on page 85 for additional
options.

Manual Drain

Operation
General Purpose

Coalescing

73A - - 1 - NNN - N
Optional Lockout Valve
and Quikmount Pipe
Adapters
H Filter-Filter (standard)
J
Lockout valve on inlet
of combination.
M Quikmount pipe adapters.
N Lockout valve on inlet
and Quikmount pipe
adapter on outlet.
Port Size
2
1/4"
3
3/8"
4
1/2"
Optional Threads
B ISO Rc Taper
G ISO G Parallel

Quikclamp Wall Mounting


Brackets
B With brackets
N Without
Coalescing Filter Bowl
D Metal with liquid level indicator
P Transparent with metal guard
T
Transparent
General Purpose Filter Bowl
D Metal with liquid level indicator
P Transparent with guard
T
Transparent
General Purpose, and Oil Removal
Filter Drains
Q 1/4 turn manual
A Automatic

Service Indicator Options


B Service indicator on both filters.
C Service indicator only on coalescing filter.
D Service indicator only on general purpose filter.
N No service indicator.

For accessories see pages 72 thru 75.

Service Kits, Specifications, Materials, Performance, and Unit


Dimensions - See filter pages 6 thru 15.

50

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

73 Series Combination Units Filters


Dimensions in Inches (mm)

See pages 7 and 15 for dimensions on individual units.


Standard Type H73AShown with optional Quikclamp wall bracket.

75

5(

2.9

5
2.9

Alternative Type J73A-Includes Lockout Valve


Shown with optional Quikclamp wall brackets.

)
(75

0
2.4 1)
(6

1
5.9

5
2.9 5)
(7

3
3.2 2)
(8

0)
(15

8)

21

(
.58

Alternative Type M73AIncludes Quikmount Pipe Adapters


Shown with optional Quikclamp wall brackets.

Alternative Type N73AIncludes Lockout Valve and Quikmount Pipe Adapters


Shown with optional Quikclamp wall brackets.

3)
16

2
6.463)
1
(

2(
6.4

0
2.4 1)
(6

3)

9
8.3

1/98

(21

9)

0
9.8

Littleton, CO USA

Phone 303-794-2611

(24

Fax 303-795-9487

51

74 Series Combination Units Filters


3/8", 1/2", and 3/4" Port Sizes
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series products
F74G pre filter and F74C oil removal filter provide
high efficiency oil removal and particle removal to
0.01 m. Pre filter removes particulate to 5m.
Coalescing filter removes particles down to 0.01 m.
Maximum remaining oil content of air leaving the
filter is 0.01 ppm at 70F (21 C) with an inlet
concentration of 17 ppm. Provides air quality within
ISO 8573-1: Class 1.-.2

F74C and F74V combinations provide air quality


within ISO 8573-1: Class 1.-.1.
Service indicator turns from green to red when the
filter element needs to be relaced.
Highly visible, prismatic liquid level indicator lens.
Quick release bayonet bowl.
Patented quarter turn manual drain.
ISO Symbols
Ordering Information
Standard Models
General Purpose Coalescing Filters: Metal bowl with liquid level indicator,
automatic drains, and service life indicators.
Adsorbing filter: Metal bowl, without liquid level indicator, closed bottom.

Automatic Drain

Model Number - Inline Units


General Purpose &
General Purpose,
Coalescing
Coalescing & Adsorbing
Filters
Filters

Port
Size
PTF

Body and
Element

3/8"
1/2"

Standard
Standard

H74A-3AB-AD1-NNN-DNN
H74A-4AB-AD1-NNN-DNN

H74F-3AB-AD1-NNN-DMN
H74F-4AB-AD1-NNN-DMN

1/2"
3/4"

High Flow
High Flow

H74B-4AB-AD1-NNN-DNN
H74B-6AB-AD1-NNN-DNN

Manual Drain

Operation
General Purpose

Coalescing

Adsorbing

Options - Select the desired combination unit from the preceding order table,
then change the model number as shown in the following diagram to obtain the
desired option. Also see Product Numbering Chart on page 85 for additional
options.

74 - 3 - 1 - NNN - M
Optional Lockout Valve
and Quikmount Pipe
Adapters
H Filter-Filter (standard)
J Lockout valve on inlet
of combination.
M Quikmount pipe adapters.
N Lockout valve on inlet and
Quikmount pipe adapter
on outlet.
Optional Threads
B ISO Rc Taper
G ISO G Parallel

Optional Quikclamp
Wall Mounting Brackets
B With brackets
Optional Bowl (Coalescing
Filter)
P Transparent with guard
Optional Bowl (General Purpose Filter)
P Transparent with guard
Optional Manual Drain (General
Purpose, Coalescing Filters)
Q 1/4 turn manual

Service Indicator Options


C Service indicator only on coalescing filter.
D Service indicator only on general purpose filter.
N No service indicator.

For accessories see pages 72 thru 75.

Service Kits, Specifications, Materials, Performance, and Unit


Dimensions - See filter pages 6 thru 18.

52

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

74 Series Combination Units Filters


Dimensions in Inches (mm)

See pages 11, 17 and 19 for dimensions on individual units.

Standard Combination Units

Optional Combinations with Lockout Valve

Shown with optional Quikclamp wall mounting brackets.

Shown with optional Quikclamp wall mounting brackets.

H74 - - - -

Two Units

3.42
(87)

3.42
(87)

J74 - - - -
3.42
(87)

Three Units

3.42
(87)

Two Units

3.68
(94)
3.42
(87)

7.37
(187)

3.03
(77)

6.84
(174)

3.42
(87)

Three Units

3.68
(94)

3.03
(77)

10.13
(257)

10.52
(267)

13.81
(351)

Optional Combinations with Quikmount Pipe Adapters


Shown with optional Quikclamp wall mounting brackets.

Optional Combinations with Lockout Valve and Quikmount


Pipe Adapter - Shown with optional Quikclamp wall mounting brackets.

M74 - - - -

N74 - - - -

Three Units

Two Units
7.37
(187)

Two Units

Three Units
7.37
(187)

11.05
(281)

11.05
(281)

3.03
(77)
3.03
(77)

9.32
(237)

1/98

13.00
(330)

Littleton, CO USA

11.37
(289)

Phone 303-794-2611

15.05
(382)

Fax 303-795-9487

53

72 Series F-R-L Combination Units


1/4" and 3/8" Port Sizes
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series products
High efficiency water and particle removal. Particle
removal within ISO 8357-1: Class 3 and 5.
Regulator balanced valve minimizes effect of
variation in the inlet pressure on the outlet pressure.
Micro-Fog or Oil-Fog models available.
Quick release bayonet bowl.
Highly visible, prismatic liquid level indicator lens.

Ordering Information
Standard Models
Filter/Regulator (F/R) and Regulator (R) listed in table are relieving type with knob
adjustment, 150 psig (10 bar) regulating spring,* and a gauge.
Filter/Regulator (F/R) and Filter (F) listed in table include an automatic drain,
transparent bowl, and a 40m element.
Lubricator (L) listed in table is an Micro-Fog model with manual drain and a
transparent bowl.
Port
Size
PTF

Filter/Regulator-Lubricator
(Two Unit F/R-L)

Model Numbers
Filter-Regulator-Lubricator
(Three Unit F-R-L)

Filter-Lubricator
(Two Unit F-L)

1/4"
3/8"

C72H-2AK-AL3-RMG-QLN
C72H-3AK-AL3-RMG-QLN

C72A-2AK-AL3-RMG-QLN
C72A-3AK-AL3-RMG-QLN

C72C-2AN-AL3-NNN-QLN
C72C-3AN-AL3-NNN-QLN

ISO Symbols
See preceding pages on general purpose filters (page 6),
regulators (page 16), filter/regulators (pages 14) and
lubricators (pages 24).

Operation
Filter

Regulator

Micro-Fog Lubricator

*Do not use these units to control pressures outside of the specified ranges.

Options - Select the desired combination unit from the preceding order table,
then change the model number as shown in the following diagram to obtain the
desired option. Also see Product Numbering Chart on page 86 for additional
options.
72 - 2 - - - Q
Optional Lockout Valve and
Quikmount Pipe
D
Lockout Valve on inlet of
combination
E
Quikmount pipe adapters
G
Lockout valve on inlet and
Quikmount pipe adapter on
outlet.
Optional Lubricator and Porting
Block
J
Oil-Fog F/R-L Combination
B
Oil-Fog F-R-L Combination
D
Oil-Fog F-L Combination
K
Micro-Fog F/R-L
Combination with porting
block between
filter/regulator and lubricator.
L
OIL-FOG F/R-L Combination
with porting block between
filter/regulator and lubricator
Optional Threads
B
ISO Rc Taper
G
ISO G Parallel
Optional Regulator and Filter/Regulator
Adjustment
T T-bar
Optional Filter and Filter/Regulator Drain
S Semiautomatic
Q Manual, 1/4 turn

54

Optional Quikclamp Wall Brackets


B With brackets
Optional Lubricator Reservoir**
D 1.9 oz. metal with liquid level
indicator
W 2.2 oz. transparent with guard
Optional Regulator and
Filter/Regulator Gauge
N Without gauge
Optional Regulator and
Filter/Regulator
Outlet Pressure Adjustment Range*
F 5 to 60 psig (0.3 to 4 bar)
Optional Regulator and
Filter/Regulator Diaphragm
N Nonrelieving

Service Kits, Specifications, Materials and


Performance
See preceding pages on general purpose filters
(pages 6 and 7), regulators (pages 16 and 17),
filter/regulators (pages 20 and 21) and lubricators
(pages 24 and 25).
For accessories see pages 72 thru 75.

Optional Filter and


Filter/Regulator Element
1 5m
Optional Filter and Filter/Regulator Bowl**
D 1.9 oz. metal with liquid level indicator
W 2.2 oz. transparent with guard

Littleton, CO USA

Phone 303-794-2611

**Automatic drain not available with D bowl


option. For other bowl options (shorter and
lower 1.9 oz. capacity) consult factory .

Fax 303-795-9487

1/98

72 Series F-R-L Combination Units


See pages 7, 21 and 33 for dimensions on individual units.
C72 Combination Units (Listed in Order Table)
2.11
(54)

D72 Combinations with Lockout Valve (See Alternative Models)

Three Units

4.22 (108)
2.11
(54)

Two
Units

6.46 (164)
2.24
(56)

2.32 (59)

Three Units

2.24 (56)

Two Units

2.11
(54)

8.24 (209)

2.11
(54)

Three Units

9.59 (244)

4.48 (113)
2.11
(54)

D72L Combination Units with


Porting Block and Lockout
Valve (See Alternative
Models)

E72L Combination Units


with Porting Block and
Quikmount Pipe Adapters
(See Alternative Models)

7.85 (200)
3.63 (92)

7.39 (188)
2.11
(54)

C72P Combination
Units with Porting
Block (See Alternative
Models)

G72P Combination Units with


Porting Block , Lockout Valve
and Quikmount Pipe Adapter
(See Alternative Models)
10.98 (279)

9.63 (245)
2.11
(54)

Littleton, CO USA

2.11
(54)

8.11 (206)
2.32 (59)

5.87 (149)

2.32 (59)

2.32 (59)

1/98

E72P Combination Units with


Porting Block and Quikmount
Pipe Adapters (See Alternative
Models)

10.09 (257)
2.11
(54)

2.11
(54)

5.87 (149)

2.32 (59)

2.32 (59)

D72P Combination Units with


Porting Block and Lockout
Valve (See Alternative
Models)

7.85 (200)
3.63
(92)

8.74 (222)
2.11
(54)

5.87 (149)

2.32 (59)

2.32 (59)

2.11
(54)

G72L Combination Units with


Porting Block , Lockout Valve
and Quikmount Pipe Adapter
(See Alternative Models)

8.11 (206)

2.32 (59)

5.61 (143)
1.39
2.11
(35)
(54)

6.72 (171)

2.32 (59)

2.32 (59)

2.32 (59)

2.32 (59)

C72L Combination
Units with Porting
Block (See Alternative
Models)

2.11
(54)

2.11
(54)

7.35 (187)

6.72 (171)

2.11
(54)

4.48 (113)

G72 Combinations with Lockout Valve and Quikmount


Pipe Adapter (See Alternative Models)

6.46 (164)
2.11
(54)

8.70 (221)
2.11
(54)

E72 Combinations with Quikmount Pipe Adapters


(See Alternative Models)
Two Units

2.24 (56)

2.11
(54)

2.11
(54)

2.32 (59)

2.32 (59)

2.11
(54)

Three Units

6.46 (164)
2.11
(54)

2.32 (59)

Two
Units

Dimensions in Inches (mm)

Phone 303-794-2611

Fax 303-795-9487

55

73 Series F-R-L Combination Units


1/4", 3/8", 1/2" Port Sizes
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series products
High efficiency water and particle removal. Particle
removal within ISO 8357-1: Class 3 and 5.
Regulator balanced valve minimizes effect of
variation in the inlet pressure on the outlet pressure.
Micro-Fog or Oil-Fog models available.
Quick release bayonet bowl.
Highly visible, prismatic liquid level indicator lens.
Ordering Information
Standard Models
Filter/Regulator (F/R) and Regulator (R) listed in table are relieving type with knob
adjustment, 150 psig (10 bar) regulating spring,* and a gauge.
Filter/Regulator (F/R) and Filter (F) listed in table include an automatic drain, metal
bowl with liquid level indicator, and a 40m element.
Lubricator (L) listed in table is an Micro-Fog model with manual drain and a metal
bowl with liquid level indicator.
Port
Size
PTF
1/4"
3/8"
1/2"

Filter/Regulator-Lubricator
(Two Unit F/R-L)

Model Numbers
Filter-Regulator-Lubricator
(Three Unit F-R-L)

ISO Symbols
Filter-Lubricator
(Two Unit F-L)

C73H-2AK-AD3-RMG-QDN C73A-2AK-AD3-RMG-QDN C73C-2AN-AD3-NNN-QDN


C73H-3AK-AD3-RMG-QDN C73A-3AK-AD3-RMG-QDN C73C-3AN-AD3-NNN-QDN
C73H-4AK-AD3-RMG-QDN C73A-4AK-AD3-RMG-QDN C73C-4AN-AD3-NNN-QDN

Options - Select the desired combination unit from the preceding order table,
then change the model number as shown in the following diagram to obtain the
desired option. Also see Product Numbering Chart on page 86 for additional
options.

See preceding pages on general purpose filters (page 8),


regulators (page 18), filter/regulators (pages 22) and
lubricators (pages 26).

Operation
Filter

Regulator

Micro-Fog Lubricator

73 - 3 - - - Q
Optional Lockout Valve and
Quikmount Pipe
D
Lockout Valve on inlet of
combination
E
Quikmount pipe adapters
G
Lockout valve on inlet and
Quikmount pipe adapter on
outlet.
Optional Lubricator and Porting
Block
J
Oil-Fog F/R-L Combination
B
Oil-Fog F-R-L Combination
D
Oil-Fog F-L Combination
K
Micro-Fog F/R-L
Combination with porting
block between
filter/regulator and lubricator.
L
OIL-FOG F/R-L Combination
with porting block between
filter/regulator and lubricator
Optional Threads
B
ISO Rc Taper
G
ISO G Parallel
Optional Regulator and Filter/Regulator
Adjustment
T T-bar
Optional Filter and Filter/Regulator Drain
Q Manual, 1/4 turn

Optional Quikclamp Wall Brackets


B With brackets
Lubricator Reservoir
P ....Transparent with guard
T ....Transparent

Optional Regulator and


Filter/Regulator Gauge
N Without gauge
Optional Regulator and
Filter/Regulator
Outlet Pressure Adjustment Range*
F 5 to 60 psig (0.3) to 4 bar)
S 10 to 250 psig (0.7 to 17 bar)
Optional Regulator and
Filter/Regulator Diaphragm
N Nonrelieving

Service Kits, Specifications, Materials,


and Performance.
See pages 6, 7, 12, and 13.

Optional Filter and


Filter/Regulator Element
1 5m

Optional Filter and Filter/Regulator Bowl


P ....Transparent with guard
T ....Transparent without guard

For accessories see pages 72 thru 75.

*Do not use these units to control pressures outside of the specified ranges.

56

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

73 Series F-R-L Combination Units


Dimensions in Inches (mm)

See pages 9, 23, and 35 for dimensions on individual units.


Standard Micro-Fog Type C73AStandard Oil-Fog Type C73BShown with optional gauge and
Quikclamp wall bracket.

5
2.9 5)
(7

Alternative Micro-Fog Type D73AAlternative Oil-Fog Type D73B-

5
2.9 5)
(7

3
3.2 2)
(8

5
2.9 5)
(7

Includes lockout valve.


Shown with optional gauge and
Quikclamp wall bracket.

3(

9.1

3)

16

2(

6.4
0
2.4 1)
(6

2)
23

9)

7
1.7

(29

Alternative Micro-Fog Type E73AAlternative Oil-Fog Type E73BIncludes Quikmount pipe adapters.
Shown with optional gauge and
Quikclamp wall bracket.

5
9.6

Alternative Micro-Fog Type G73AAlternative Oil-Fog Type G73B-

5)
(24

5)

Includes lockout valve and


Quikmount pipe adapter.
Shown with optional gauge
and Quikclamp wall bracket.

24
5(

9.6
0
2.4 1)
(6

7
1.5

4
(29

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

0)

33

9(

.9
12

57

74 Series Combination F-R-L Units


3/8", 1/2", and 3/4" Port Sizes
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series products
High efficiency water and particle removal. Particle
removal within ISO 8357-1: Class 3 and 5.
Regulator balanced valve minimizes effect of
variation in the inlet pressure on the outlet pressure.
Micro-Fog or Oil-Fog models available.
Quick release bayonet bowl.
Highly visible, prismatic liquid level indicator lens.

Ordering Information
Standard Models
Regulator and Filter/Regulator: Knob adjustment, relieving, 150 psig spring, gauge.
Filter and Filter/Regulator: Automatic drain, metal bowl with liquid level indicator,
40m element.
Lubricator: Micro-Fog, manual drain, 7-ounce metal bowl with liquid level indicator.

ISO Symbols

Port
Size
PTF

Model Numbers
Filter/Regulator-Lubricator

Filter-Regulator-Lubricator

Filter-Lubricator

3/8"
1/2"
3/4"

C74H-3AK-AD3-RMG-QDN
C74H-4AK-AD3-RMG-QDN
C74H-6AK-AD3-RMG-QDN

C74A-3AK-AD3-RMG-QDN
C74A-4AK-AD3-RMG-QDN
C74A-6AK-AD3-RMG-QDN

C74C-3AN-AD3-NNN-QDN
C74C-4AN-AD3-NNN-QDN
C74C-6AN-AD3-NNN-QDN

Options - Select the desired combination unit from the preceding order table,
then change the model number as shown in the following diagram to obtain the
desired option. Also see Product Numbering Chart on page 86 for additional
options.

See preceding pages on general purpose filters (page 8),


regulators (page 18), filter/regulators (pages 22) and
lubricators (pages 26).

Operation
Filter

Regulator

Micro-Fog Lubricator

74 - 3 - - - Q
Optional Lockout Valve
and Quikmount Pipe
Adapters
D Lockout valve on inlet
of combination.
E Quikmount pipe adapters.
G Lockout valve on inlet and
Quikmount pipe adapter
on outlet.
Optional Lubricator and
Porting Block
J Oil-Fog F/R-L Combination
B Oil-Fog F-R-L Combination
D Oil-Fog F-L Combination
K Micro-Fog F/R-L
Combination with porting
block between filter/regulator
and lubricator.
L Oil-Fog F/R-L Combination
with porting block between
filter/regulator and lubricator.
Optional Threads
B ISO Rc Taper
G ISO G Parallel
Optional T-Handle Pressure
Adjustment
T T-handle (Required with the
optional 250 psig regulating spring)

58

Optional Quikclamp Wall


Mounting Brackets
B With brackets
Optional Lubricator
Reservoir
P 7-oz. transparent with
metal guard
Standard Gauge
N....Without gauge
Optional Regulating Springs
F 5 to 60 psig (0.3 to 4 bar)
S 10 to 250 psig (1 to 17 bar) - The
S spring option requires the
optional T-handle adjustment and
a metal reservoir on the lubricator.
Optional Diaphragm
N Nonrelieving

Service Kits, Specifications, Materials and


Performance

Optional Element
1 5m
Optional Bowl (Filter,Filter/Regulator)
P Transparent with metal guard
Optional Drain (Filter, Filter/Regulator)
Q 1/4 turn manual

Littleton, CO USA

See preceding pages on general purpose filters (pages 8


and 9), regulators (pages 18 and 19), filter/regulators
(pages 22 and 23) and lubricators (pages 26 and 27).
For accessories see pages 72 thru 75.

Phone 303-794-2611

Fax 303-795-9487

1/98

74 Series Combination F-R-L Units


Dimensions in Inches (mm)

See pages 11, 25, and and 37 for dimensions on individual units.

Standard Combination Units

Optional Combinations with Lockout Valve

Shown with optional Quikclamp wall mounting brackets.

Shown with optional Quikclamp wall mounting brackets.

C74 - - - -

Two Units

3.42
(87)

D74 - - - -

Three Units

3.42
(87)

3.42
(87)

Two Units

3.42
(87)
3.68
(94)

3.68
(94)
3.42
(87)

3.03
(77)

10.52
(267)

Optional Combinations with Quikmount Pipe Adapters


Shown with optional Quikclamp wall mounting brackets.

13.81
(351)

10.13
(257)

Optional Combinations with Lockout Valve and Quikmount


Pipe Adapter - Shown with optional Quikclamp wall mounting brackets.
G74 - - - -

E74 - - - -

Two Units

3.42
(87)
7.37
(187)

3.03
(77)

6.84
(174)

Three Units

Three Units

Two Units
9.20
(234)

9.20
(234)

Three Units

7.37
(187)

11.05
(281)

3.03
(77)

3.03
(77)

3.03
(77)

13.20
(335)

11.16
(283)

15.05
(382)

11.37
(289)

Combination Units with Porting Block


Shown with optional Quikclamp wall mounting brackets.
Standard Combinations

Combinations With Lockout


Valve

C74 - - - - D74 - - - -

1.85
(47)

E74 - - - -

G74 - - - -

9.20
(234)

5.52
(140)

9.20
(234)

3.03
(77)

8.69
(221)

1/98

Combinations With Lockout Valve and


Quikmount Pipe Adapter

3.42
(87)

3.42
(87)

3.42
(87)

Combinations With Quikmount


Pipe Adapters

3.03
(77)

11.97
(304)

Littleton, CO USA

11.16
(283)

Phone 303-794-2611

13.20
(335)

Fax 303-795-9487

59

P74 Solenoid Operated


Directional Control Valves
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series products.
Inlet and outlet ports are not threaded.
High-flow, spring return valves.
2-port/2-position valves available in normally closed
or normally open functional modes. The 3-port/2position valves available normally closed only.
Options include various voltages, low watt coils,
and electrical connectors.
Short stroke, positive sealing cushioned poppets for
long service life.

Ordering Information

ISO Symbols

Standard Models
Model Numbers - Modular installation,120V60Hz/110V50Hz,
7.5 watt solenoid coil, internal pilot supply, manual locking
override, cable grip electrical connector.
Installation Weight
2-Port/2-Position
2-Port/2-Position 3-Port/2-Position
Type
lbs. (kg)
Normally Closed
Normally Open
Normally Closed
Modular 1.63 (0.74) P74A-NNC-SJA
P74B-NNC-SJA
P74C-NAC-SJA

Options - Select the desired valve from the preceding order table, then change
the model number as shown in the following diagram to obtain the desired option.
Also see Product Numbering Chart on page 87 for additional options.

2-Port/2-Position
Normally Closed

2-Port/2-Position
Normally Open

3-Port/2-Position
Normally Closed

Operation
NORMAL

P74 - NNC - S
7.5 Watt Coils
L = 24 VAC
K = 240 VAC
Q = 12 VDC
P = 24 VDC

B = Cable grip with indicator


lights

3.5 Low Watt Coils


C = 24 VAC
A = 120 VAC
D = 6 VDC
E = 12 VDC
F = 24 VDC

2-Port/2-Position
Normally
Closed

ACTUATED

B
(OUT)
A
(IN)

A
(IN)

Inlet Blocked
2-Port/2-Position
Normally
Open

Pressure to Port B

B
(OUT)
A
(IN)

Service Kits

B
(OUT)

B
(OUT)
A
(IN)

Pressure to Port B

Seal and gasket kit: 53474-37


Moisture resistant connector seal: 54935-01
Coil retaining clip: 54453-01
Solenoid exhaust port diffuser: 54463-01

3-Port/2-Position
Normally
Closed

Inlet Blocked

B
(IN)

B
(IN)

A
(OUT)

A
(OUT)

* For valves with threaded ports, see NCA-12.


Inlet Blocked

Pressure to Port A

For accessories see pages 72 thru 75.

60

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

P74
Dimensions in inches (mm)

Technical Data

2-Port/2-Position Valves

Fluids: Filtered and lubricated compressed air.


Main valve inlet pressure range: 30 to 150 psig (2.1 to 10.3 bar)
Operating Temperature*: -18 to 120F (-28 to 49C).
* Air supply must be dry enough to avoid ice formation at temperatures
below 35F (2C).
Average flow factor (Cv) of 2-port valves: 4.0
Average flow factor (Cv) of 3-port valves:
In-Out Ports: 2.0
Out-Exhaust Ports: 5.3
Response times of 3-port valve (elapsed time from solenoid energized to
an increase in the main valve pressure):
Standard operator: 11 ms at 90 psig
Low wattage operator: 13.5 ms at 90 psig
Exhaust port on 3-port/2-position valves: 1/2-14 PTF

3.15
(80)

2.28
(60)

1.97
(50)

6.12
(156)

1.44
(37)

Solenoid Operator Electrical Specifications


Voltage and power requirements:
Wattage
Standard Low Watt
Voltage
Operator Operator
24V/60Hz/50Hz
120V/60Hz-110V/50Hz
240V/60Hz-220V/50Hz
6VDC
12VDC
24VDC

7.5
7.5
7.5

7.5
7.5

3-Port/2-Position Valves
3.15
(80)

3.5
3.5

3.5
3.5
3.5

2.28
(60)

1.97
(50)

Duty: Continuous at 90% to 105% of rated voltage.


Coil Type: Molded with three pin plug-in connector.
Enclosure Classification: NEMA 1, NEMA 4 and IP 65.
Connector Plug: Cable grip for cables 1/4" to 5/16" (6 to 8 mm) in diameter.
Electrical connectors conform to Industry Standard Form B for Three-Pin
Electrical Plug Connectors, 11 mm spacing.
Override: Manual, locking

Materials

1.75
(45)

Body: Zinc
Pistons, Poppets: Aluminum
Elastomers: Nitrile
Operator Housing: PPS Plastic
Operator Base: Aluminum
Plunger & Spring: Stainless Steel

1/98

6.43
(163)

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

61

P74 Directional Control Valves


2-port/2-position and 3-port/2-position Air
Operated Directional Control Poppet Valves
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series
products. Inlet and outlet ports are not threaded.
2-port/2-position valves available in normally
closed or normally open functional modes. The
3-port/2-position valves available only in
normally closed mode.
Short stroke, positive sealing cushioned
poppets for long service life.

ISO Symbols
Ordering Information
Standard Models

Installation Weight
Type
lbs. kg
Modular 1.20 (0.54)

2-Port/2-Position
Normally Closed
P74A-NNA-NNN

Model Numbers
2-Port/2-Position
Normally Open
P74B-NNA-NNN

3-Port/2-Position
Normally Closed
P74C-NAA-NNN

See Product Numbering Chart on page 87 for additional options.

2-Port/2-Position
Normally Closed

2-Port/2-Position
Normally Open

3-Port/2-Position
Normally Closed

Operation
NORMAL
2-Port/2-Position
Normally
Closed

Service Kit
Seal and gasket kit: 53474-37

ACTUATED

B
(OUT)
A
(IN)

B
(OUT)
A
(IN)

Inlet Blocked

Pressure to Port B

* For valves with threaded ports, see NCA-12.


2-Port/2-Position
Normally
Open

B
(OUT)
A
(IN)

B
(OUT)
A
(IN)

Pressure to Port B

3-Port/2-Position
Normally
Closed

B
(IN)

B
(IN)
A
(OUT)

Inlet Blocked

62

Littleton, CO USA

Phone 303-794-2611

Inlet Blocked

Fax 303-795-9487

A
(OUT)

Pressure to Port A

1/98

P74 Air Operated Directional Control Valves


Dimensions in inches (mm)

Technical Data

2-Port/2-Position Valves

Fluids: Filtered and lubricated compressed air.


Main valve inlet pressure range: 0 to 250 psig (17.2 bar).
Pilot supply inlet pressure range: Equal to or greater than main valve inlet
pressure, but not less than 30 psig (2.1 bar) and not greater than 250
psig (17.2 bar).
Operating temperature*: -20 to 130F (-29 to 54C).
* Air supply must be dry enough to avoid ice formation at temperatures
below 35F (2C).
Average flow factor (Cv) of 2-port valves: 4.0
Average flow factor (Cv) of 3-port valves:
In-Out Ports: 2.0
Out-Exhaust Ports: 5.3
Pilot port: 1/4-18 PTF
Exhaust port on 3-port/2-position valves: 1/2-14 PTF

3.15
(80)

2.28
(60)

3.52
(89)
1.44
(37)

Materials
Body: Zinc
Pistons, Poppets: Aluminum
Elastomers: Nitrile
Operator: Aluminum

3-Port/2-Position Valves

3.15
(80)

2.28
(60)

3.83
(97)

1.75
(45)

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

63

P74 Directional Control Valves


3-Port/2-position Solenoid Operated
Valves with Lockout
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series
products. Inlet and outlet ports are not threaded.
High-flow, spring return 3-port/2-position,
normally closed solenoid operated poppet valve.
Combination lockout and quick exhaust valve.
Equipped with a manually operated lockout
slide that can be locked only in the closed
position with a customer supplied padlock.
Slide handle colored yellow for easy
identification as a lockout valve.
Standard internal pilot supply requires a main
valve inlet pressure of 30 to 150 psig, although
momentary drops below 30 psig are allowed by
a check valve in the internal pilot passage.
Optional voltages available.
Short stroke, positive sealing, cushioned
poppets for long service life.

ISO Symbols

Ordering Information
3-Port/2-Position
Normally Closed

Standard Models

Installation
Type
Modular

Model Numbers - Modular installation; 120V/60Hz-110V50Hz,


7.5 watt solenoid coil; internal pilot supply; manual
nonlocking override; cable grip electrical connector.
Weight
3-Port/2-Position
lbs.kg
Normally Closed
2.03(0.92)

Operation
3-Port/2-Position
Normally
Closed

B
(IN)

B
(IN)
A
(OUT)

P74C-NAD-PJA

Options - Select the desired valve from the preceding order table, then change the
model number as shown in the following diagram to obtain the desired option. Also
see Product Numbering Chart on page 87 for additional options.

Inlet Blocked

A
(OUT)

Pressure to Port A

P74C-NAD-PA
Standard 7.5
Watt Coils
L = 24 VAC
K = 240 VAC
Q = 12 VDC
P = 24 VDC

Service Kit
Seal and gasket kit: 53474-40
Moisture resistant connector seal: 54935-01
Coil retaining clip: 54453-01
Solenoid exhaust port diffuser: 54463-01

* For valves with threaded ports, see NA-170.

64

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

P74 Solenoid Operated Directional Control Valves


Dimensions in inches (mm).

Technical Data

3-Port/2-Position Lock Out Valves

Fluids: Filtered and lubricated compressed air.


Main valve inlet pressure range: 30 to 150 psig (2.1 to 10.3 bar)
Operating temperature*: -20 to 120F (-29 to 49C).
* Air supply must be dry enough to avoid ice formation at temperatures below 35F
(2C).
Average flow factor (Cv):
In-Out Ports: 2.0
Out-Exhaust Ports: 5.3
Response times (elapsed time from solenoid energized to an increase in
the main valve pressure): 11 ms at 90 psig
Maximum diameter of customer supplied padlock shackle: 5/16" (8mm)
Exhaust port: 1/2-14 PTF

1.40
(36)

1.97
(50)
Rad.

0.57
(15)
6.85
(174)

Solenoid Operator Electrical Specifications

2.28
(60)
1.75
(44)

Voltage and power requirements:


Voltage
Wattage
24V/60Hz/50Hz
120V/60Hz-110V/50Hz
240V/60Hz-220V/50Hz
12VDC
24VDC

2.99
(76)

3.15
(80)

7.5
7.5
7.5
7.5
7.5

Duty: Continuous at 90% to 105% of rated voltage.


Coil Type: Molded with three pin plug-in connector.
Enclosure Classification: NEMA 1, NEMA 4 and IP 65.
Connector Plug: Cable grip for cables 1/4" to 5/16" (6 to 8 mm) in diameter.
Electrical connectors conform to Industry Standard Form B for Three-Pin Electrical
Plug Connectors, 11 mm spacing.
Override: Manual, nonlocking

Materials
Body: Zinc
Pistons, Poppets: Aluminum
Elastomers: Nitrile
Operator Housing: PPS Plastic
Operator Base: Aluminum
Plunger & Spring: Stainless Steel

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

65

P74 Smooth Start Valves


2-port/2-position
Normally Closed Poppet Valves
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series
products. Inlet and outlet ports are not threaded.
Controls rate of downstream air pressure
buildup at system start up.
Cylinders and other air operated devices are
eased into normal starting positions, reducing
the possibility of equipment damage and hazard
to user.
Application of downstream pressure can be
delayed for as long as 50 seconds, depending
on the setting of the adjustable needle valve
and downstream air volume.
Smooth start valves must be installed
downstream of a directional control valve such
as a Norgren Poppet or Lockout Valve on the
preceding pages.
Short stroke, cushioned poppets for long
service life.

ISO Symbol

Ordering Information
Standard Models
Installation
Type
Modular

Weight
lbs. kg

Model Number

1.17 (0.53)

P74E-NNN-NNN

Operation

See Product Numbering Chart on page 87 for additional options.

Service Kit
Normally
Closed

Seal and gasket kit: 53474-37

66

A
(IN)

A
(IN)

Restricted Air Flow


to Port B

* For valves with threaded ports, see NCA-12.

Littleton, CO USA

Phone 303-794-2611

B
(OUT)

B
(OUT)

Fax 303-795-9487

Unrestricted Air Flow


to Port B

1/98

P74 Smooth Start Valves


Dimensions in inches (mm)

Technical Data

2-Port/2-Position Smooth Start Valves

Fluids: Filtered and lubricated compressed air.


Inlet Pressure Range: 30 to 250 psig (2.1 to 17.2 bar).
Operating temperature*: -20 to 130F (-29 to 54C).
* Air supply must be dry enough to avoid ice formation at temperatures
below 35F (2C).
Average Flow Factor (Cv): 4.0

3.60
(91)

2.28
(60)

Materials
Body: Zinc
Pistons, Poppets: Aluminum
Elastomers: Nitrile
3.75
(95)
1.44
(37)

3.15
(80)

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

67

P72F Smooth Start/Exhaust Valve


1/4'', and 3/8'' Port Sizes
EXCELON design allows in-line or modular
installation with other 72, 73, and 74 Series products.
High-flow, 3-port/2-position, spring return, normally
closed valve
Controls rate of downstream air pressure buildup at
system start up
Available with air or solenoid operator
Cylinders and other air operated devices are eased
into normal starting positions, reducing the
possibility of equipment damage and hazards to the
user.
High exhaust flow of downstream air when electrical
signal or pilot air is removed.

ISO Symbols
Ordering Information
Standard Models
Model Numbers - PTF thread, solenoid operated valves include a non-locking
manual override, 110/120 VAC coil, and a cable grip connector.
Port Solenoid Operated
Weight
Air Operated
Weight
Size
Model
lbs. (kg)
Model
lbs. (kg)
1/4 PTF P72F-2AC-PAA
2.00 (0.91)
P72F-2AA-NNN
1.93 (0.88)
3/8 PTF P72F-3AC-PAA
1.98 (0.90)
P72F-3AA-NNN
1.91 (0.87)

Solenoid Operated

Air Operated

See Product Numbering Chart on page 88 for additional options.

P72F - -

Optional Threads
B ISO Rc taper
G ISO G parallel

Service Kits
All models 4384-520

Optional Solenoid Operator


Electrical Connector
B Cable grip with indicator lights
(Use only with A and F coils)
C 1/2 NPT conduit
N No electrical connector

Normally
Closed

Optional Solenoid Coil


Voltage & Power Requirement
D 6 VDC, 2.0 watts
E 12 VDC, 2.0 watts
F 24 VDC, 2.0 watts
H 110 VDC, 3.4 watts
C 24 VAC, 2.5 Va
K 220/240 VAC, 8 VA, 50/60 Hz
Y No coil, with base for 2.0W
Z No coil, with base for 2.0W, 3.4,
and 2.5 VA coils
N No solenoid operator

B
(OUT)

B
(IN)
A
(IN)

A
(OUT)

Exhaust

Optional Solenoid Operator


Override
S ...Locking, screwdriver slot
N ...No solenoid operator

68

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

P72F Smooth Start/Exhaust Valve


Technical Data
Connector Plug: Cable grip for cables 1/4" to
5/16" (6 to 8mm) diameter. Electrical
connectors conform to Industry Standard
Form B for Three-Pin Electrical Plug
Connectors, 11 mm spacing.
Solenoid Manual Override: Locking or nonlocking

Fluid: Filtered and lubricated compressed air


Main valve inlet pressure range:
With solenoid operator: 44 to 150 psig (3 to 10 bar)
With air operator: 44 to 250 psig (3 to 17 bar)
Air operator pilot supply inlet pressure range: Equal to or greater than main valve inlet
pressure, but not less than 44 psig (3 bar) and not greater than 250 psig (17 bar).
Operating temperature*:
With solenoid operator: 0 to +120F (-18 to +50C)
With air operator: 0 to +150F (-18 to +65C)

Materials
Body: Zinc alloy
Operator adapter (top) plate: Aluminum
Elastomers: Nitrile
Filter discs: Sintered plastic
Operator housing: PPS plastic
Internal components: Brass, steel
NOTE
Turn on inlet air to the valve before applying pilot
signal to air or solenoid operator.

* Air supply must be dry enough to avoid ice formation at temperatures below +35F (2C).

Maximum flow with 90 psig (6.3 bar) inlet pressure and pressure drop of 7.25 psig (0.5
bar): 45 scfm (21 dm3/s)
Average flow factor (Cv):
In-out ports: 1.6
Out-exhaust ports: 1.7
Snap pressure: Full flow when downstream pressure reaches 50 to 80% of inlet
pressure
Charge time for 0.53 gallon (2 litre) downstream volume at 90 psig (6.3 bar) inlet
pressure: 0.8 to 76 seconds depending on setting of flow adjustment
Solenoid operator specifications:
DC Voltage and Power
AC Voltage and Power
6 VDC, 2W
24 VAC, 2.5 VA
12 VDC, 2W
110/120 VAC, 2.5 VA
24 VDC 2W
220/240 VAC, 8 VA
110 VDC, 3.4W
Duty: Continuous at 90% to 110% of rated voltage.
Coil Type: Molded with three pin plug-in connector.
Enclosure Classification: NEMA 1, NEMA 4 and IP 65.

Performance Characteristics
bar g

psig

Port Size: 1/4''

0.8

PRESSURE DROP

10

Dimensions Inches (mm)


Solenoid Operated Valve

Air Operated Valve

50
3.4

90
6.3

60
4.1

120
8.3

150
10.3

0.4

4
0.2
2

1.89 (48)

0.95 (24)

2.56 (65)

1.89 (48)

0.95 (24)

2.56 (65)

Inlet Pressure psig


bar g

0.6

10-32 pilot port with PTF main ports.


M5 pilot port with ISO G and ISO Rc main ports.

10

20

30

10

15
AIR FLOW

40

50
20

60 scfm
25

dm3/s

4.33 (110)

bar g

psig

MAXIMUM CHARGE TIME


0.53 gal (2 liter) downstream volume
Inlet Pressure psig
bar g

3.58 (91)

OUTLET PRESSURE

200

.77 (451)

6.14 (156)

16

12
160

120

150
10.3
120
8.3
90
6.3
60
4.1
50
3.4

SNAP POINT

80
4
40

1/4 PTF exhaust port with PTF main ports.


ISO Rc 1/4 exhaust port with ISO G and ISO Rc main ports.

1/4 PTF exhaust port with PTF main ports.


ISO Rc 1/4 exhaust port with ISO G and ISO Rc main ports.

0
0

20

40

60

80

100

120

CHARGE TIME - SECONDS

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

69

P74F Smooth Start/Exhaust Valve


3/8'', 1/2'', and 3/4'' Port Sizes
EXCELON design allows in-line or modular installation
with other 72, 73, and 74 Series products.
High-flow, 3-port/2-position, spring return, normally closed
valve
Available with air or solenoid operator
Controls rate of downstream air pressure buildup at
system start up
Adjustable rate of downstream pressure buildup
Cylinders and other air operated devices are eased into
normal starting positions, reducing the possibility of
equipment damage and hazards to the user.
High exhaust flow of downstream air when electrical signal
or pilot air is removed.
Optional manual operated lockout slide exhausts
downstream air and shuts off pilot air when closed. Can be
locked in closed position with a customer supplied
padlock.

ISO Symbols

Ordering Information
Model Numbers - Include PTF threads and an operator adapter plate without
lockout slide. Solenoid operated valves include a non-locking manual override,
110/120 VAC coil, and a cable grip connector.
Port Solenoid Operated
Weight
Air Operated
Weight
Size
Model
lbs. (kg)
Model
lbs. (kg)
3/8 PTF P74F-3AC-PAA
2.38 (1.08)
P74F-3AA-NNN
2.31 (1.05)
1/2 PTF P74F-4AC-PAA
2.31 (1.05)
P74F-4AA-NNN
2.25 (1.02)
3/4 PTF P74F-6AC-PAA
3.11 (1.41)
P74F-6AA-NNN
2.98 (1.35)

Solenoid Operated

Air Operated

See Product Numbering Chart on page 88 for additional options.

P74F - -

Optional Threads
A PTF threads, yellow slide
B ISO Rc taper thread, red slide
G ISO G parallel thread, red slide

Operator Adapter Plate


A
B
C
D

Air pilot
Air pilot with lockout slide
Solenoid pilot
Solenoid pilot with lockout slide

Service Kits
All models 4384-220

Optional Solenoid Operator


Electrical Connector
B Cable grip with indicator lights
(Use only with A and F coils)
C 1/2 NPT conduit
N No electrical connector

Normally
Closed

Optional Solenoid Coil


Voltage & Power Requirement
D
6 VDC, 2.0 watts
E
12 VDC, 2.0 watts
F
24 VDC, 2.0 watts
H
110 VDC, 3.4 watts
C
24 VAC, 2.5 Va
K
220/240 VAC, 8 VA, 50/60 Hz
Y
No coil, with base for 2.0W
Z
No coil, with base for 2.0W, 3.4,
and 2.5 VA coils
N
No solenoid operator

B
(OUT)

B
(IN)
A
(IN)

A
(OUT)

Exhaust

Optional Solenoid Operator


Override
S Locking, screwdriver slot*
N No solenoid operator
* The locking override is not available with the D Operator Adapter Plate.

70

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

P74 F Smooth Start/Exhaust Valve


Internal components: Brass, steel

Technical Data

NOTE
Turn on inlet air to the valve before applying pilot
signal to air or solenoid operator.

Typical Performance Characteristics

PRESSURE DROP

bar d

psid

Port Size: 1/2"


Downstream Volume: 0.53 gallon (2 liter)

0.6

10 Inlet Pressure psig 50


bar 3.4

60
4.1

90 120 150
6.3 8.3 10.3

0.4

4
0.2
2

0
0

40

80

20

120

40

160

60

200

80

scfm
dm3/s

100

AIR FLOW

psig

bar g

MAXIMUM CHARGE TIME


0.53 gal (2 liter) downstream volume

Inlet Pressure psig


bar g

200
OUTLET PRESSURE

Fluid: Filtered compressed air


Main valve inlet pressure range:
With solenoid operator (internal pilot): 44 to 150 psig (3 to 10 bar)
With air operator: 44 to 250 psig (3 to 17 bar)
Air operator pilot supply inlet pressure range: Equal to or greater than main valve inlet
pressure, but not less than 44 psig (3 bar) and not greater than 250 psig (17 bar).
Operating temperature*:
With solenoid operator: 0 to +120F (-18 to +50C)
With air operator: 0 to +175F (-18 to +80C)
* Air supply must be dry enough to avoid ice formation at temperatures below +35F (2C).
Maximum flow with 90 psig (6.3 bar) inlet pressure and pressure drop of 7.25 psig (0.5
bar): 121 scfm (57 dm3/s)
Average flow factor (Cv):
In-out ports: 4.4
Out-exhaust ports: 5.6
Snap pressure: Full flow when downstream pressure reaches 50 to 80% of inlet
pressure
Charge time for 0.53 gallon (2 litre) downstream volume at 90 psig (6.3 bar) inlet
pressure: 0.2 to 76 seconds depending on setting of flow adjustment
Solenoid operator specifications:
DC Voltage and Power
AC Voltage and Power
6 VDC 2W
24 VAC, 2.5 VA
12 VDC, 2W
110/120 VAC, 2.5 VA
24 VDC 2W
220/240 VAC, 8 VA
110 VDC, 3.4W
Duty: Continuous at 90% to 110% of rated voltage
Coil type: Molded with three pin plug-in connector and CE marking
Enclosure Classification: NEMA 1, NEMA 4 and IP 65.
Connector Plug: Cable grip for cables 1/4" to 5/16" (6 to 8mm) diameter. Electrical
connectors conform to Industry Standard Form B for Three-Pin Electrical Plug

Connectors, 11 mm spacing.
Solenoid Manual Override: Locking or non-locking

12
160
150
10.3
8

120
8.3
90
6.3
60
4.1

120
SNAP POINT
80

Materials

4
40

Body: Aluminum
Operator adapter (top) plate: Zinc
Elastomers: Nitrile
Filter discs: Sintered plastic
Solenoid operator housing: PPS plastic

50
3.4

0
0

10

20

30

40

50

60

70

80

90

100 110 120

CHARGE TIME IN SECONDS

Dimensions Inches (mm)


* Ports threaded PTF with PTF main ports, and ISO Rc with ISO Rc and ISO G main ports.

3.31 (84)

3.31 (84)

1.46 (37)

6.50 (165)

6.38 (162)

1.18 (30) A/F

4.21 (107)

1.18 (30) A/F

5.67 (144)

3.46 (88)

8.35 (212)

6.14 (156)

1/2" Exhaust Port *

1/2" Exhaust Port *


1.18 (30) A/F

8.70 (221)

1/2" Exhaust Port *


1.18 (30) A/F

1.46 (37)

1.46 (37)

1/2" Exhaust Port *

4.37 (111) max.


3.78 (96) min.

3.31 (84)

4.37 (111) max.


3.78 (96) min.

Air Operated Valve


with Lockout Slide

3.31 (84)

2.91 (74)

Solenoid Operated Valve


with Lockout Slide

2.91 (74)

Air Operated Valve

1.46 (37)

Solenoid Operated Valve

1/4" Pilot Port *


1/4" Pilot Port *

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

71

Accessories and Components


Dimensions in Inches (mm)

Wall Mounting Bracket


Use to secure Excelon Series Units, except P74 and T74 Valves, to a
wall, machine panel, or other flat surface.
Order
Numbers

Used On

72 Series 4224-50 (except T72)


73 Series 4424-50 (except T73)
74 Series 4324-50 (except P74 and
T74 valves, and L74 with
1-quart reservoir
L74 w/ 1-quart reservoir 4324-51
Use 3/16" (5mm) screws to mount
bracket to wall.

72 Series Dimensions

73 Series Dimensions

2.64 (67)

1.50 (38)
1.10
(28)

0.71
(18)

0.16 (4)

1.46
(37)

2.40 (61)

0.24 (6)

0.74 (19)

0.28 (7)

Port LC

Port CL
0.77 (20)

0.24
(6)

Lockout Hasp

72 Series 4255-51
73 Series 4455-51
74 Series 4355-51
Install on the adjusting knob of regulators,
filter/regulators, and relief valves to help
prevent unauthorized adjustment to the
pressure setting. Cover can be locked in
place with up to four customer supplied
padlocks. Maximum diameter of the padlock
shackle is 5/16" (8mm). If desired, the
following lockout hasp accessory can be used
with the cover.

73/74 Series 54547-01


Use with the preceding tamper resistant
cover or the P74 and T74E Lockout Valves to
provide six padlock lockout capability.
Locking holes accommodate padlock shackle
up to 5/16" (8mm). Constructed from hightensile, plated steel and red vinyl coated to
resist rust.

Pressure Gauges - Back Connection

Seal Wire

Range
psig (bar)
72 Series
0 to 60 (0 to 4)
0 to 160 (0 to 10)
0 to 60 (0 to 4)
0 to 160 (0 to 10)
73/74 Series
0 to 60 (0 to 4)
0 to 160 (0 to 11)
0 to 300 (0to 20)

72/73/74 Series 2117-01


Use as a replacement wire for the preceding
tamper resistant cover or install under the
sight-feed dome on lubricators (74 Series) to
provide tamper resistant protection of the
lubricator drip rate setting.

Model
Number

Back
Connection

18-013-211
18-013-212
18-013-264
18-013-263

1/8 PTF
1/8 PTF
ISO R1/8
ISO R1/8

18-013-208
18-013-209
18-013-210

1/4" NPT
1/4" NPT
1/4" NPT
Littleton, CO USA

1.97 2.40
(50) (61)

Dimensions in inches (mm)


Bracket
A
B
4324-50
2.00 (51) 3.11 (79)
4324-51
3.17 (81) 4.29 (109)

Tamper Resistant Cover & Seal Wire

72

1.00
(25)

0.20
(5)

2.00 (51)

1.54 (39)

Port CL

0.16 (4)

0.16 (4)

Port CL
0.71 (18)

2.72
(69)

1.89 (48)

0.20 (5)

Port L
C

0.24 (6)

Port CL

2.36 (60)

1.50 (38)

1.65 (42)

0.79 0.47
(20) (12)

74 Series Dimensions

2.37 (60)

Phone 303-794-2611

Fax 303-795-9487

1/98

Accessories and Components

Panel Nut

Service Life Indicator Conversion Kit


F73/F74C and F73/F74G 5797-50
Allows field conversion of service life indicators.

72 Series 4248-89 (plastic)


73 Series 5191-88 (Zinc)
5191-89 (plastic)
74 Series 4348-89 (Zinc)
Use to panel mount R72/R73/R74 Regulators,
B72/B73/B74 Filter/Regulators, and V72/V74
Relief Valves.

F73/F74 Electrical Service Indicator


F73G/F74G and F73C/F74C 4020-51R
Allows addition of the service indicator in the
field. For additional details and specifications
refer to NC-846.

Quikclamp
72 Series 4214-51
73/74 Series 4314-51
Maximum Pressure: 250 psig (17 bar)
Maximum Temperature
72 Series: 150F (65C)
73/74 Series: 175F (79C)
Use with all Excelon Series Products to
provide modular installation capability. Flanges
on the products slide into V grooves in the
Quikclamp. Two face-sealing o-rings in the
Quikclamp provide a positive seal when the
clamp is closed and the captive screw is
tightened.
Note
72 Series Quikclamp adds: 0.26" (6.5 mm) to
the overall length of a combination unit.
Tighten 72 Series screw with a 3 mm hex
wrench or a T15 Torx wrench.
73/74 Series Quikclamp adds: 0.54" (13.6
mm) to the overall length of a combination
unit. Tighten 74 Series screw with a 5/32"
(4 mm) hex or a T25 Torx wrench.

1/98

Porting Block

72 Series Service Kit


(contains 2 O-Rings):
4384-570
73/74 Series Service Kit
(contains 2 O-Rings):
4384-770

Littleton, CO USA

Installs between two Quikclamps to


provide three additional 1/4" outlets
for auxiliary air.
Note
72 Series Porting Block adds:
1.13" (28.6 mm) to the overall length
of a combination unit.
73/74 Series Porting Block adds:
1.30" (33 mm) to the overall length of
a combination unit.
Auxiliary Port
Size & Thread
72 Series
1/4" PTF
1/4" ISO G
1/4" ISO Rc
73/74 Series
1/4" PTF
1/4" IS0 Rc
1/4" ISO G

Phone 303-794-2611

Part Number
4216-01
4216-03
4216-02
4316-02
4316-04
4316-06

Fax 303-795-9487

73

Accessories and Components


Dimensions in Inches (mm)

Quikmount Pipe Adapters


Port Size
Part No.
and Thread
(Quantity of 1)
72 Series
1/4" PTF
4215-02
3/8" PTF
4215-03
1/4" ISO Rc 4215-05
3/8" ISO Rc 4215-06
1/4" ISO G
4215-08
3/8" ISO G
4215-09
73/74 Series
1/4" PTF
4315-01
3/8" PTF
4315-02
1/2" PTF
4315-03
3/4" PTF
4315-04
1/4" ISO Rc 4315-05
3/8" ISO Rc 4315-06
1/2" ISO Rc 4315-07
3/4" ISO Rc 4315-08
1/4" ISO G
4315-09
3/8" ISO G
4315-10
1/2" ISO G
4315-11
3/4" ISO G
4315-12

Quikclamp Wall Mounting Bracket


Use with the Quikclamp to provide
threaded connections to the system
piping.
Note
72 Series pipe adapter adds:
0.63" (15.9 mm) to the overall length
of a combination unit.
73/74 Series pipe adapter adds:
0.71" (18 mm) to the overall length of
a combination unit.

Use with the preceding Quikclamp to provide


secure mounting to a wall, machine panel or
other flat surface.
72 Series 4213-89
Use 3/16" (5 mm) screws to mount bracket to
wall.
73/74 Series 4313-89
Use 7/32" (6 mm) screws to mount bracket to
wall.
A

2.32 (59)

0.55 (14)

2.91 (74)

3.25 (83)

0.95 (24)

4.0 (102)

4313-89

Quikclamp and Wall Mounting Bracket

Monitors air pressure and provides


an electrical output when the
pressure drops below or exceeds
an adjustable preset pressure.
Installs between two Quikclamps.
Also provides three additional 1/4"
auxiliary outlets.

See Quikclamp Wall Mounting


Bracket for descriptions and
dimensions.
72 Series 4214-52
Use 3/16" (5 mm) screws to mount
bracket to wall.

A Subbase Mounted Pressure


Switch adds 1.13" (28.6mm) to the
overall length of a combination unit.
Specifications
Maximum Inlet Pressure:
250 psig (17 bar)
Maximum Temperature:
150F (65C)
Adjustable Range: 30 to 150 psig
Replacement Pressure Switch
(2 to 10 bar). Shipped from
Use only with the pressure switch
factory preset at 90 psig (6.2
subbase. Cannot be used with the
bar).
standard porting block.
Maximum Voltage: 240VAC/DC
Maximum Current: 5 Amp
Hysteresis at Midpoint: 12%

74

4213-89

Subbase Mounted Pressure Switch

Auxiliary
Port Threads
1/4" PTF
1/4" ISO Rc
1/4" IS0 G
Replacement Switch

72 Series
Part Number
4246-50
4246-51
4246-52
4246-01

73/74 Series 4314-52


Use 7/32" (6 mm) screws to mount
bracket to wall.

Wall
A
Port CL
A
4214-52 1.50" (38)
4314-52 2.00" (51)

73/74 Series
Part Number
4346-50
4346-51
4346-52
4346-01

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

Accessories and Components


Dimensions in Inches (mm)

Manifold Block

Tamper Resistant Snap-On Cap

Installs with Quikclamps. Ports are threaded to provide


manifolding capability for up to three components.
Port Threads
72 Series
3/8" PTF
3/8" IS0 Rc
3/8" ISO G
73/74 Series
3/4" PTF
3/4" IS0 Rc
3/4" ISO G

Part Number

72/73 Series 4050-89


Install on lubricator sight feed-dome to
help prevent unauthorized adjustment
to the oil drip rate setting. Can not be
used with the optional
Pyrex/Aluminum sight-feed
dome.

A
1.76 (44.6)

B
1.98 (50.3)

2.25 (57.0)

3.15 (80)

4228-01
4228-02
4228-03
4328-50
4328-52
4328-53

Neck Mount Bracket Kit

Transition Adapter

(includes panel mount nut)


R72/B72 74316-50
Use to wall mount R72 Regulators and B72
Filter/Regulators.
R73/B73 4461-50
Use to wall mount R73 Regulators and B73
Filter/Regulators.
R74/B74 4368-51
Use to wall mount R74 Regulators and B74
Filter/Regulators

72/73/74 Series 4417-01


Installs between a 72 Series
and a 73/74 Series
Quikclamp to provide modular
connection of 72 products with 73
and 74 products.
A reducing adapter adds 0.06"
(1.5 mm) to the overall length of a
combination unit.

Vibration Resistant Washer

R73/B73 4461-50

2.06 (52)

2.75 (70)

1.5 (38)

Littleton, CO USA

.9 (23)

.95 (24)
1.38 (35)

1.0
(25)

1.5 (38)

0.2 (4)

1.0
(25)

2.2 (56)

0.65 (17)

0.27 (7)

1.5 (38)

1.1 (28)

1.5
(38)

0.3 (8)

1.0 (25)

3.5 (89)

2.5 (64)

1.2
(30)

8/98

R74/B74 4368-51

3.37 (85)

1.9 (49)

.28 (7)

R72/B72 74316-50

74 Series 4361-89
Pushes on the bowl when there is no
pressure to prevent loosening during periods
of non-pressurized high vibration.

Phone 303-794-2611

Fax 303-795-9487

75

F72G/F73G/74G Product Numbering System


(72)
(73)
(74)

72 Series
73 Series
74 Series

F 7 4 G - 4 A D - A D 3

Sample Model Number


Position
1

Filter Type
Elastomer Materials

10

72 Series = Basic 1/4"


73 Series = Basic 3/8"
74 Series = Basic 1/2"

Series

F = General Purpose Filter,


Fluorocarbon elastomers

G = General Purpose Filter,


Nitrile elastomers
2
3
4
6

Port Size

=
=
=
=

1/4"
3/8"
1/2"
3/4"

(72, 73)

2
3
4
6

(73, 74)
(74)

A = NPT
B = ISO Rc taper
G = ISO G parallel

Thread Form

Drain

A = Automatic*
S = Semiautomatic (72)
Q = Manual, 1/4 turn

Bowl

D = Metal with liquid


level indicator
R = Metal with pyrex liquid
level indicator
T = Transparent (72, 73)
L = Long transparent (72)
P = Transparent with guard
W = Long transparent with
guard (72)

1/4"
3/8"
1/2"
3/4"

(72, 73)

(73, 74)
(74)

N = Without service
life indicator

D = Manual, petcock

R = Metal with pyrex liquid


level indicator
(73, 74)

1
2
3
4

Element

=
=
=
=

A = NPT
B = ISO Rc taper
G = ISO G parallel

D = With service life


indicator
E = With electrical
service life indicator
N = Without service life
indicator

Service Life Indicator

10

F = Filter

Unit

=
=
=
=

5 m
25 m
40 m
75 m

(74)

*Requires L or W bowls on 72 Series

76

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

F72C/F73C/74C Product Numbering System


(72)
(73)
(74)

F 7 4 C - 4 A D - A D 0

Sample Model Number


Position
1

Unit

Thread Form

Service Life Indicator

Drain

10

10

F = Filter
72 Series= Basic 1/4"
73 Series = Basic 3/8"
74 Series = Basic 1/2"

C = Oil Removal Filter,


Standard element and body,
Nitrile elastomers

2
3
4
6

Port Size

Series

4 Filter Type
Elastomer Materials

72 Series
73 Series
74 Series

=
=
=
=

1/4"
3/8"
1/2"
3/4"

= Oil Removal Filter, High


flow element and body, Nitrile
elastomers

(74)

(72, 73)

4 = 1/2"
6 = 3/4"

(73, 74)
(74)

A = PTF
B = ISO Rc taper
G = ISO G parallel

D = With service life indicator


E = With electrical service life indicator
N = Without service life indicator

A = Automatic *
Q = Manual, 1/4 turn
S = Semiautomatic (72)

D =
L =
P =
R =
T =
W=

Bowl

Metal with liquid level indicator


Long transparent (72)
Transparent with guard (73, 74)
Metal with pyrex sight glass
Transparent (72, 73)
Long transparent with guard (72)

0 = Coalescing

Element

*Requires L or W bowls on 72 Series

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

77

F74V Product Numbering System


74 Series only

Sample Model Number


Position
1

Unit

10

74 Series= Basic 1/2"

Series

V = Oil Vapor Removal Filter,


Nitrile elastomers

3 = 3/8"
4 = 1/2"
6 = 3/4"

5 Port Size

A = PTF
B = ISO Rc taper
G = ISO G parallel

Thread Form

Service Life Indicator

Drain

E = Closed bottom

Bowl

M = Metal without sight glass

10

F = Filter

4 Filter Type,
Elastomer Materials

78

F 7 4 V - 4 A N - E M A

Element

N = Without service life indicator

A = Adsorbing

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

R72G/R73G/R74G Product Numbering System


(72)
(73)
(74)

Sample Model Number


Position
1

Regulator Type

Port Size

Thread Form

Adjustment

Relief Type, Elastomer


material

Spring

10

R = Regulator
72 Series= Basic 1/4"
73 Series= Basic 3/8"
74 Series= Basic 1/2"
G = General Purpose, Standard Flow
M = General Purpose, Manifolding (72)
R = General Purpose, Reverse Flow

2
3
4
6

=
=
=
=

1/4" (72, 73)


3/8''
1/2" (73, 74)
3/4" (74)

A = PTF
B = ISO Rc taper
G = ISO G parallel

K = Knob

T = T-handle

R = Relieving, nitrile
N = Nonrelieving, nitrile
F = Relieving, fluorocarbon
E = Nonrelieving, fluorocarbon

R = Relieving, nitrile
N = Nonrelieving, nitrile
F = Relieving, fluorocarbon
E = Nonrelieving, fluorocarbon

F = 60 psig (4 bar)
M = 150 psig (10 bar)
S = 250 psig (17 bar) (73)

F = 60 psig (4 bar)
M = 150 psig (10 bar)
S = 250 psig (17 bar)

(73, 74)

G = With gauge
N = Without gauge

10 Gauge

1/98

Series

R 7 4 G - 4 A K - R M G

Unit

72 Series
73 Series
74 Series

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

79

B72G/B73G/B74G Product Numbering System


(72)
(73)
(74)

72 Series
73 Series
74 Series

B 7 4 G - 4 A K - A D 3 - R M G

Sample Model Number


Position
1

Drain

Bowl

10 Element

11 Relief Type

12 Spring

10

11

12

13

F = General Purpose Filter, with


Fluorocarbon elastomers

G = General Purpose,
Nitrile elastomers
2
3
4
6

Port Size

Adjustment

72 Series = Basic 1/4"


73 Series = Basic 3/8"
74 Series = Basic 1/2"

Filter/Regulator Type
Elastomer Materials

B = Filter/Regulator

Series

Thread Form

=
=
=
=

1/4"
3/8"
1/2"
3/4"

2
3
4
6

(72, 73)

(73, 74)
(74)

A = PTF
B = ISO Rc taper
G = ISO G parallel

K = Knob

T = T-handle

5 m
25 m
40 m
75 m

(72, 73)

(73, 74)
(74)

R = Metal with pyrex


liquid level indicator

1
2
3
4

(74)

=
=
=
=

5 m
25 m
40 m
75 m

(74)

F = Relieving
E = Nonrelieving

R = Relieving
N = Nonrelieving
F = 60 psig (4 bar)
M = 150 psig (10 bar)
S = 250 psig (17 bar)**

F = 60 psig (4 bar)
M = 150 psig (10 bar)
S = 250 psig (17 bar)**

G = With gauge
N = Without gauge

Littleton, CO USA

T = T-handle

D = Manual, petcock

D = Metal with liquid level


indicator
L = Long transparent (72)
P = Transparent with guard (73, 74)
R = Metal with Pyrex liquid level
indicator
T = Transparent (72, 73)
W = Long transparent with
guard (72)

=
=
=
=

1/4"
3/8"
1/2"
3/4"

K = Knob

A = Automatic*
Q = Manual, 1/4 turn
S = Semiautomatic (72)

1
2
3
4

=
=
=
=

A = PTF
B = ISO Rc taper
G = ISO G parallel

13 Gauge

80

Unit

Phone 303-794-2611

* Requires L or W bowls on 72 Series


** D and R bowls only
74 Series requires T-handle option
250 psig spring not available on 72 Series

Fax 303-795-9487

1/98

L72/L73 Product Numbering System


(72)
(73)

L 7 3 C - 4 A P - Q D N

Sample Model Number


Position

Unit

Lubricator Type &


Elastomer Materials

Port Size

10

L = Lubricator
72 Series = Basic 1/4"
73 Series = Basic 3/8"

Series

72 Series
73 Series

C = Oil-Fog, Nitrile elastomers


M = Micro-Fog, Nitrile elastomers

2 = 1/4"
3 = 3/8"
4 = 1/2"

E = Micro-Fog, Fluorocarbon elastomers


F = Oil-Fog, Fluorocarbon elastomers

2 = 1/4"
3 = 3/8"
4 = 1/2"

(73)

(73)

Thread Form

A = PTF
B = ISO Rc taper
G = ISO G parallel

A = PTF
B = ISO Rc taper
G = ISO G parallel

Flow type

P = Uni-directional

P = Uni-directional

Drain Opening

10

Reservoir

Options

E = Closed bowl
Q = Manual, 1/4 turn

D = Manual, petcock

D = Manual, petcock

D = Metal with liquid


level indicator
L = Long transparent (72)
P = Transparent with
guard (73)
T = Transparent
R = Metal with Pyrex
liquid level indicator
W = Long transparent
with guard (72)

R = Metal with pyrex liquid level


indicator

R = Metal with pyrex liquid level


indicator

N = Plastic dome,
Standard fill plug
P = Pyrex dome,
Standard fill plug

P = Pyrex dome,
Standard fill plug

N = Plastic dome,
Standard fill plug
P = Pyrex dome,
standard fill plug (73)*
Q = Plastic dome,
Quick fill cap (73)

* R bowl only

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

81

L74 Product Numbering System


(74)

74 Series

L 7 4 C - 4 A P - Q D N

Sample Model Number


Position

10

L = Lubricator

Series

74 Series= Basic 1/2"

Lubricator Type &


Elastomer Materials

Port Size

Thread Form

Flow type

P = Uni-directional

Drain Opening

E = Closed bowl
Q = Manual,
1/4 turn

Reservoir

D = Metal with
liquid level
indicator
P = Transparent
with guard

10

Options

N = Plastic dome,
Standard fill
plug
Q = Plastic dome,
Quick fill cap

82

Unit

C = Oil-Fog, Nitrile elastomers


M = Micro-Fog, Nitrile elastomers

E = Micro-Fog, Fluorocarbon elastomers


F = Oil-Fog, Fluorocarbon elastomers

3 = 3/8"
4 = 1/2"
6 = 3/4"

3 = 3/8"
4 = 1/2"
6 = 3/4"

A = NPT
B = ISO Rc taper
G = ISO G parallel

A = NPT
B = ISO Rc taper
G = ISO G parallel

E = Bi-directional
P = Uni-directional

A = 1-quart,
Metal with
Pyrex
liquid level
indicator

L = Liquid level
switch
N = Plastic dome,
Standard fill plug
P = Pyrex dome,
standard fill plug
Q = Plastic dome,
Quick fill cap

Littleton, CO USA

D = Manual,
petcock
E = Closed bowl
Q = Manual,
1/4 turn

P = Uni-directional

E = Bi-directional
P = Uni-directional

R = Remote fill
device

D = Manual, petcock

R = Metal with
Pyrex liquid
level indicator

D = Metal with
liquid level
indicator
P = Transparent
with guard
R = Metal with
Pyrex liquid
level indicator

A = 1-quart,
Metal with
Pyrex
liquid level
indicator
R = Metal with
Pyrex liquid
level indicator

N = Plastic dome,
Standard fill
plug
P = Pyrex dome,
Standard fill
plug

N = Plastic dome,
Standard fill
plug
P = Pyrex dome,
Standard fill
plug

P = Pyrex dome,
Standard fill
plug

Phone 303-794-2611

Fax 303-795-9487

1/98

V72G/V74G Product Numbering System


(72)
(74)

V 7 4 G - 4 A K - N M N

Sample Model Number

Position
1

Relief Valve Type

Port Size

Thread Form

Adjustment

Relief Type,
elastomer material

Spring

10

72 Series= Basic 1/4"


74 Series= Basic 1/2"

Series

V = Relief Valve

G = General Purpose
2
3
4
6

=
=
=
=

1/4"
3/8"
1/2"
3/4"

(72)

(74)
(74)

A = PTF
B = ISO Rc taper
G = ISO G parallel

K = Knob

T = T-handle

N = Non-relieving
Neoprene

N = Non-relieving
Neoprene

F = 60 psig (4 bar)
M = 150 psig (10 bar)

10 Gauge

1/98

Unit

72 Series
74 Series

F = 60 psig (4 bar)
M = 150 psig (10 bar)
S = 250 psig (17 bar)

(74)

G = With gauge
N = Without gauge

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

83

T72/T73/T74 Product Numbering System


(72)
(73)
(74)

72 Series
73 Series
74 Series

T 7 4 E - 4 A A - P 1 N

Sample Model Number


Position
1

Unit

84

Type

Port Size

Thread Form

Porting

Actuation

Elastomer materials

Options

10

T = Shut-Off Valve
72 Series= Basic 1/4"
73 Series= Basic 3/8"
74 Series= Basic 1/2"

Series

10

B = 2-port/2-position (2-way),
padlocks in closed position only,
black slide, exhaust not tapped.
E = 3-port/2-position (3-way),
padlocks in closed position only,
yellow slide, exhaust not tapped.

2
3
4
6

=
=
=
=

1/4"
3/8"
1/2"
3/4"

T = 3-port/2-position (3-way),
padlocks in closed position only,
red slide, exhaust tapped

(72, 73)

2
3
4
6

(73, 74)
(74)

A = NPT
B = ISO Rc taper
G = ISO G parallel

=
=
=
=

1/4"
3/8"
1/2"
3/4"

(72, 73)

(73, 74)
(74)

A = NPT
B = ISO Rc taper
G = ISO G parallel

A = Threaded inlet and outlet

A = Threaded inlet and outlet

P = Gate valve

P = Gate valve

1 = Nitrile

1 = Nitrile

N = None

N = None
S = Silencer
D = Diffuser (72, 73)

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

72/73/74 Filter-Filter
72 Series
73 Series
74 Series

(72)
(73)
(74)

H 7 4 A - 3 A B - A D 1 - N N N - D M N

Sample Model Number


Position

10

11

12

13

14

15

16

H = Standard combination
J = Lockout valve on inlet
M = Quikmount pipe adapters
N = Lockout valve on inlet,
Quikmount pipe adapter on outlet

Unit

Series
72 Series = Basic 1/4"
73 Series = Basic 3/8"
74 Series = Basic 1/2"

Filter Type

A = General Purpose and


Coalescing filters,
with standard body

Service Life Indicator

General Purpose and


Coalescing Filter Drains

= General purpose
and coalescing filters,
with high flow body

(74)

4 = 1/2"
6 = 3/4"

(72, 73)

(73, 74)

A = NPT
B = ISO Rc
G = ISO G

B = Service Life Indicator on both General


Purpose & Coalescing
C = Service Life Indicator only on Coalescing Filter
D = Service Life Indicator only on General Purpose Filter
N = No Service Life Indicator

General Purpose Filter Bowl

10 General Purpose Filter Element

= General Purpose,
coalescing and
adsorbing filters, with
standard body

(74)

3 = 3/8"
4 = 1/2"

A = NPT
B = ISO Rc
G = ISO G

Thread Form

2 = 1/4"
3 = 3/8"
4 = 1/2"

Port Size

B = Service Life Indicator on both General


Purpose & Coalescing
C = Service Life Indicator only on Coalescing Filter
D = Service Life Indicator only on General Purpose Filter
N = No Service Life Indicator

A = Automatic*
S = Semiautomatic (72)
Q = Manual, 1/4 turn

A = Automatic
Q = Manual, 1/4 turn

D = Metal w/liquid level indicator


L = Long transparent (72)
P = Transparent w/guard (73, 74)
T = Transparent (72, 73)
W = Long transparent with guard

D = Metal w/liquid level indicator


P = Transparent w/guard
(72)

1 = 5 m

1 = 5 m

11 Regulator Option

N = No regulator

N = No regulator

12 Regulator Option

N = No regulator

N = No regulator

13 Regulator Option

N = No regulator

N = No regulator

14 Coalescing Filter Bowl

15 Vapor Removal Filter Bowl

16 Mounting

1/98

D = Metal w/liquid level indicator


L = Long transparent (72)
P = Transparent w/guard (73, 74)
T = Transparent (72, 73)
W = Long transparent with guard

D = Metal w/liquid level indicator


P = Transparent w/guard
(72)

M = Metal, no liquid level indicator,


closed bottom

N = No vapor removal filter


N = No brackets
B = Brackets
Littleton, CO USA

*Requires L or W bowls on 72 Series


Phone 303-794-2611

N = No brackets
B = Brackets

Fax 303-795-9487

85

72/73/74 F-R-L Combination Units


(72)
(73)
(74)

72 Series
73 Series
74 Series

Sample Model Number

Position

Combination Type

H = Micro-Fog F/R-L Combo


J = Oil-Fog F/R-L Combo
K = Micro-Fog F/R-L Combo*
L = Oil-Fog F/R-L Combo*
*w/porting block between

Port Size

Adjustment

Drain

Filter
Bowl

10 Element

11 Relief Type
12 Spring

10

11

12

13

14

15

16

2
3
4
6

=
=
=
=

1/4"
3/8"
1/2"
3/4"

(72, 73)

(74)

1/4"
3/8"
1/2"
3/4"

(72, 73)

(73, 74)
(74)

A = NPT
B = ISO Rc
G = ISO G

K = Knob
T = T-Handle

N = No Regulator

A = Automatic**
Q = Manual, 1/4 turn
S = Semiautomatic (72)

A = Automatic**
Q = Manual, 1/4 turn
S = Semiautomatic (72)

D = Metal w/liquid level indicator


L = Long transparent (72)
P = Transparent w/guard (73, 74)
T = Transparent (72, 73)
W = Long transparent with guard
1
2
3
4

=
=
=
=

5m
25m
40m
74m

D = Metal w/liquid level indicator


L = Long transparent (72)
P = Transparent w/guard (73, 74)
T = Transparent (72, 73)
W = Long transparent with guard

(72)

1
2
3
4

(74)

F = 60 psig (4 bar)
M = 150 psig (10 bar)
S = 250 psig (17 bar) (73, 74) (74 requires T-handle)

A = 1 qt. metal bowl


w/Pyrex liquid level
indicator (74)

N, B, D, Q, L, A, C, F, H, K

N = No Accessories
B = Wall Brackets
D = Service Indicator
Q = Quick Fill Cap(73, 74)

Littleton, CO USA

=
=
=
=

5m
25m
40m
74m

(72)

(74)

N = No regulator

R = Relieving
N = Non-relieving

Q = Manual, 1/4 turn

** Requires L or W bowls on 72 Series

=
=
=
=

A = NPT
B = ISO Rc
G = ISO G

14 Lubricator Drain

16 Accessories

2
3
4
6

(73, 74)

G = Gauge
N = Without Gauge

Lubricator Bowl
Type

C = Micro-Fog F-L Combo


D = Oil-Fog F-L Combo

A = Micro-Fog F-R-L Combo


B = Oil-Fog F-R-L Combo

13 Gauge

86

72 Series = Basic 1/4"


73 Series = Basic 3/8"
74 Series = Basic 1/2"

Series

Thread Form

15

C = Standard combination
D = Lockout valve on inlet
E = Quikmount pipe adapters
G = Lockout valve on inlet,
Quikmount pipe adapter on outlet

Unit

C 7 4 H - 3 A K - A D 3 - R M G - Q D N

N = No regulator

N = No regulator

E = Closed Bottom
Q = Manual, 1/4 turn
R = Remote Fill (74)
D = Metal w/liquid level Indicator
L = Long transparent (72)
P = Transparent w/guard (73, 74)
T = Transparent (72, 73)
W = Long transparent with guard

(72)

N, B, D, Q, A, C, E, H

L = Low Level Switch


A=B+D
C = B + Q (73, 74)
F = B + L (74)

Phone 303-794-2611

(74)

H = B + D + Q (73, 74)
K = B + D + L (74)

Fax 303-795-9487

1/98

P74 Product Numbering System


74 Series only

Sample Model Number

P 7 4 C - N N C - S J A
1

Position
1

Unit

3 Series

10

P = Poppet Valve

74 Series= Basic 1/2"

Painted Yellow
C = 3-port/2-position,
normally closed, with
lockout

Painted Black
A = 2-port/2-position,
normally closed
B = 2-port/2-position,
normally open
C = 3-port/2-position,
normally closed

Painted Black
E = 2-port/2-position,
normally closed, with
smooth start

Port Size

N = None

N = None

N = None

Thread Form

N = None

N = None

N = None

Operator

D = Solenoid, internal
air pilot with lockout

C = Solenoid, internal air


pilot

Manual Override

P = Nonlocking, push button

S = Locking, screwdriver
slot

Poppet Valve Type

Coil

Standard 7.5
Watt Coils

Standard 7.5
Watt Coils

L = 24 VAC
J = 120 VAC
K = 240 VAC
Q = 12 VDC
P = 24 VDC

L = 24 VAC
J = 120 VAC
K = 240 VAC
Q = 12 VDC
P = 24 VDC

A = Air

N = None

N = None

N = None

Optional 3.5
Low Watt Coils
C = 24 VAC
A = 120 VAC
D = 6 VDC
E = 12 VDC
F = 24 VDC

10 Connector

A = Cable grip
B = Molded cable with
indicator lights

A = Cable grip

N = None

A and F coils only.

1/98

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

87

P72F/P74F Product Numbering System


(72)
(74)

72 Series
74 Series

Sample Model Number

P 7 4 F - 4 A D - P A A
1

Position
1

Unit

3 Series

10

F = 3-port/2-position
normally closed, with
smooth start

2 = 1/4'' (72)
3 = 3/8''
4= 1/2'' (74)
6 = 3/4'' (74)

Port Size

Thread Form (slide color)

Operator

Manual Override

10 Connector

72 Series = Basic 1/4''


74 Series = Basic 1/2"

Poppet Valve Type

Coil

P = Poppet Valve

A = NPT, (yellow slide)


B = ISO Rc taper, (red slide)
G = ISO G parallel, (red slide)

D = Solenoid, internal air pilot


with lockout slide (74)

P = Nonlocking, push button

A
F
E
D
C
K

C = Solenoid, internal air


pilot

B = Air with lockout


slide (74)

S = Locking, screwdriver slot

Voltage
110/120V 50/60 Hz
24 VDC
12 VDC
6 VDC
24V 50/60 Hz
220/240V 50/60 Hz

A = Air

N = None

Nominal
Power
2.5 VA
2.0W
2.0W
2.0 W
2.5 VA
8.0 VA

N = None

A = Cable grip
B = Cable grip with
indicator light
C = 1/2'' conduit

N = None

Slide color applies only when a lockout slide is specified by a B or D in the 7th position.
The locking override is not available with the D Operator Adapter Plate.
A and F coils only.

88

Littleton, CO USA

Phone 303-794-2611

Fax 303-795-9487

1/98

Warning and Warranty

Warning
These products are intended for use in industrial
compressed air systems only. Do not use these products
where pressures and temperatures can exceed those
listed under Specifications.
Before using these products with fluids other than those
specified, for non-industrial applications, life-support
systems, or other applications not within published
specifications, consult Norgren.
Through misuse, age, or malfunction, components used
in fluid power systems can fail in various modes. The
system designer is warned to consider the failure modes
of all component parts used in fluid power systems and to
provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure modes.
System designers must provide a warning to end
users in the system instructional manual if protection
against a failure mode cannot be adequately provided.

Limited Warranty, Disclaimer &


Limitation of Remedies
Items sold by Norgren are warranted to be free from
defects in materials and workmanship for a period of two
years from the date of manufacture, provided said items
are used according to Norgrens recommended usages
and within Norgrens specifications. Norgrens liability is
limited to the repair of, or replacement in kind of, at
Norgrens sole option, any items proved defective,
provided these items are returned to Norgren prepaid. To
confirm date of purchase, invoice date or invoice number
must be furnished; otherwise, date code on product will be
used to determine eligibility for warranty coverage. The
warranties expressed above are in lieu of and exclusive of
all other warranties.

1/98

Littleton, CO USA

System designers and end users are cautioned to


review specific warnings found in instruction sheets
packed and shipped with these products. System
designers should also provide for all OSHA requirements
including Title 29 CFR 1910.147 Lockout/Tagout.
It should be recognized that warnings are valid for any
product, regardless of manufacturer, and are not restricted
to products manufactured by Norgren. Norgrens
reputation for product quality and performance is well
established. We feel we have the additional obligation to
provide information or warnings to customers to assist
them in applying our products in a reasonable and safe
manner.

There are no other warranties, expressed or implied,


except as stated herein. There are no implied
warranties of merchantability or fitness for a particular
purpose, which are specifically disclaimed. Norgrens
liability for breach of warranty as herein stated is the
exclusive remedy, and in no event shall Norgren be
liable or responsible for incidental or consequential
damages, even if the possibility of such incidental or
consequential damages has been made known to
Norgren.
Norgren reserves the right to discontinue manufacture
of any product or change product materials, design, or
specifications without notice.

Phone 303-794-2611

Fax 303-795-9487

89

Você também pode gostar