Escolar Documentos
Profissional Documentos
Cultura Documentos
Draft A
Date
2014-01-20
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
WCDMA RAN
URA-Cell Update Feature Parameter Description
Contents
Contents
1 About This Document..................................................................................................................1
1.1 Scope..............................................................................................................................................................................1
1.2 Intended Audience..........................................................................................................................................................1
1.3 Change History...............................................................................................................................................................1
2 Overview.........................................................................................................................................3
3 URA/Cell Update Principles........................................................................................................5
3.1 Types of URA/Cell Update............................................................................................................................................5
3.1.1 Periodical URA/Cell Update.......................................................................................................................................5
3.1.2 URA/Cell Update due to Cell Reselection..................................................................................................................6
3.1.3 Cell Update due to Paging Response...........................................................................................................................6
3.1.4 Cell Update due to Uplink Data Transmission............................................................................................................6
3.1.5 Cell Update due to Radio Link Failure........................................................................................................................7
3.1.6 Cell Update due to Re-entering Service Area..............................................................................................................7
3.1.7 Cell Update due to RLC Unrecoverable Error............................................................................................................7
3.1.8 Cell Update due to MBMS PtP RB Request...............................................................................................................8
3.1.9 Cell Update due to MBMS Reception.........................................................................................................................8
3.2 Signaling Procedure of URA/Cell Update......................................................................................................................8
3.2.1 Signaling Procedure of URA Update..........................................................................................................................8
3.2.2 Signaling Procedure of Cell Update..........................................................................................................................11
3.3 Automatic FACH Power Compensation During Cell Updates....................................................................................17
4 Engineering Guidelines.............................................................................................................18
4.1 WRFD-010801 Intra RNC Cell Update.......................................................................................................................18
4.1.1 Requirements.............................................................................................................................................................18
4.1.2 Activation..................................................................................................................................................................18
4.1.3 Activation Observation..............................................................................................................................................19
4.1.4 Deactivation...............................................................................................................................................................20
4.1.5 MML Command Examples.......................................................................................................................................20
4.2 WRFD-010802 Inter RNC Cell Update.......................................................................................................................20
4.2.1 Requirements.............................................................................................................................................................21
4.2.2 Activation..................................................................................................................................................................21
4.2.3 Activation Observation..............................................................................................................................................21
Issue Draft A (2014-01-20)
ii
WCDMA RAN
URA-Cell Update Feature Parameter Description
Contents
4.2.4 Deactivation...............................................................................................................................................................22
4.2.5 MML Command Examples.......................................................................................................................................22
4.3 WRFD-010901 Intra RNC URA Update......................................................................................................................22
4.3.1 Requirements.............................................................................................................................................................22
4.3.2 Activation..................................................................................................................................................................22
4.3.3 Activation Observation..............................................................................................................................................23
4.3.4 Deactivation...............................................................................................................................................................24
4.3.5 MML Command Examples.......................................................................................................................................24
4.4 WRFD-010902 Inter RNC URA Update......................................................................................................................24
4.4.1 Requirements.............................................................................................................................................................24
4.4.2 Activation..................................................................................................................................................................25
4.4.3 Activation Observation..............................................................................................................................................26
4.4.4 Deactivation...............................................................................................................................................................26
4.4.5 MML Command Examples.......................................................................................................................................26
4.5 Automatic FACH Power Compensation During Cell Updates....................................................................................27
4.5.1 When to Use Automatic FACH Power Compensation During Cell Updates...........................................................27
4.5.2 Required Information................................................................................................................................................27
4.5.3 Deployment...............................................................................................................................................................27
4.5.4 Performance Monitoring............................................................................................................................................32
4.5.5 Parameter Optimization.............................................................................................................................................34
4.5.6 Troubleshooting.........................................................................................................................................................34
5 Parameters.....................................................................................................................................35
6 Counters......................................................................................................................................302
7 Glossary.......................................................................................................................................333
8 Reference Documents...............................................................................................................334
iii
WCDMA RAN
URA-Cell Update Feature Parameter Description
1.1 Scope
This document describes basic types and signaling procedure of URA/Cell update, including its
technical principles, and engineering guidelines.
This document covers the following features:
l
Feature change
Changes in features of a specific product version
Editorial change
Changes in wording or addition of information that was not described in the earlier version
Draft A (2014-01-20)
Compared with Issue 01 (2013-09-30) of RAN15.0, Draft A (2014-01-30) of RAN16.0 includes
the following changes.
Issue Draft A (2014-01-20)
WCDMA RAN
URA-Cell Update Feature Parameter Description
Change Type
Change Description
Parameter Change
Feature change
Added the
PCH_UE_RLC_UNRECOVE
RABLEERROR_SWITCH to
the PROCESSSWITCH4
parameter of the SET
URRCTRLSWITCH
command.
l CellUpdtCause
l FachPowerCellUpdtEcNoThd
Added the
P2F_CUC_REPEAT_SWITC
H to the OptimizationSwitch3
parameter of the SET
URRCTRLSWITCH
command.
WCDMA RAN
URA-Cell Update Feature Parameter Description
2 Overview
Overview
The URA is the UTRAN registration area. A URA consists of multiple cells. URA update
happens only in the URA_PCH state. The purpose of making a UE switching to the URA_PCH
state is to prevent a UE that has no data to transmit (especially those moving at a high speed)
from frequently initiating cell reselection. The functions and basic processes of cell update and
URA update are similar. The only difference lies in the range of triggering the update. URA/cell
update is used by the UE to report the location information and status of the UE. The reporting
method is classified into two types: periodical URA/cell update and event-triggered URA/cell
update. URA update occurs when the UE is in URA_PCH state, and cell update occurs when
the UE is in CELL_PCH or CELL_FACH state.
Additionally, cell update is also used to perform some other functions, such as UE state transition
and radio link re-establishment on the DCH. As a result, cell update may happen when the UE
is in CELL_DCH, CELL_FACH, CELL_PCH, or URA_PCH state.
URA/cell update enables the UTRAN to manage the UE behaviors. It can be applied to mobility
management, cell reselection, and paging procedures. URA/cell update has the following
functions:
The URA update:
l
Enables the UTRAN to periodically monitor the status of the UE in URA_PCH state.
Enables the UTRAN to know in time the URA where the UE is camping if URA changes
after cell reselection.
Enables the UE to retrieve a new URA identity after reselecting a cell that does not belong
to the currently assigned URA.
Enables the UTRAN to know the cell where the UE is camping after the UE in CELL_PCH,
URA_PCH or CELL_FACH state re-enters the service area.
Enables the UTRAN to know in time the new cell of UE after cell reselection.
Enables the UE to transit from CELL_PCH or URA_PCH state to CELL_FACH state when
the network is paging the UE.
WCDMA RAN
URA-Cell Update Feature Parameter Description
2 Overview
Enables the UE to require the uplink data transmission to transit from CELL_PCH or
URA_PCH state to CELL_FACH state.
Enables the UE that is out of synchronization on the dedicated radio link channel to reestablish a new dedicated channel.
Enables the RNC to release the RRC connection of the UE or to re-establish an RLC entity
in case of RLC unrecoverable error.
Enables the UTRAN to be informed about the UEs that are in the URA_PCH, CELL_PCH,
or CELL_FACH state and are to receive MBMS data.
Enables the UTRAN to count the number of UEs that are in the URA_PCH, CELL_PCH,
and CELL_FACH states and are to receive MBMS data.
Enables the UEs to request the MBMS PTP RB setup when the UEs are in CELL_PCH,
URA_PCH, or CELL_FACH state.
WCDMA RAN
URA-Cell Update Feature Parameter Description
For details about SIB1, see section 8.1.1.6.1 "System Information Block type 1" in 3GPP
TS 25.331 V6.6.0.
For details about the UTRAN MOBILITY INFO CONF message, see section 10.2.63
"UTRAN MOBILITY INFORMATION CONFIRM" in 3GPP TS 25.331 V6.6.0.
Accordingly, the RNC starts an internal timer for the UE in CELL_FACH, CELL_PCH or
URA_PCH state. The value of this timer is greater than that of T305. When the RNC receives
a URA/CELL UPDATE message with the cause "periodical URA/cell update", it restarts the
internal timer. If the RNC does not receive a URA/CELL UPDATE message before expiry of
the internal timer, the RNC decides that the UE is out of service, and then initiates the RRC
connection release procedure.
NOTE
WCDMA RAN
URA-Cell Update Feature Parameter Description
If a UE in URA_PCH state reselects a new cell of a different URA, the UE performs URA
update with the cause "change of URA".
Upon reception of a URA/CELL UPDATE message with the cause "Change of URA/Cell
reselection", the RNC updates the URA/cell where the UE camps.
The URA ID can be assigned to a cell through the parameter URAID. The URA ID should be
created through the MML command ADD UURA before being assigned to a cell.
The main parameters involved in the cell reselection algorithm when the UE is in CELL_FACH,
CELL_PCH, or URA_PCH state are listed as follows:
l
If you want to set cell reselection parameters for each UE state (URA_PCH, CELL_PCH,
CELL_FACH) respectively, you can use the MML command ADD UCELLSELRESEL to set
them.
l
For details about the cell reselection procedure, see "Cell Reselection" in the UE Behaviors in
Idle Mode Feature Parameter Description.
On some occasions, the UE in Cell_PCH state performs cell reselection frequently and initiates
the cell update procedure frequently. When the RNC detects this status of the UE, it enables the
UE to transfer to the URA_PCH state through the message "CELL UPDATE CONFIRM".
If the number of cell update procedures initiated by the UE within an evaluation period exceeds
the threshold of cell reselection, the RNC judges that the UE is in frequent cell reselection state.
WCDMA RAN
URA-Cell Update Feature Parameter Description
with this cause, the RNC sends a CELL UPDATE CONFIRM message to the UE and switches
the UE to the CELL_FACH state.
If the UE in CELL_DCH state detects that the criteria for radio link downlink failure are
met, the UE performs cell update with the cause "radio link failure".
2.
Upon reception of a CELL UPDATE message with this cause, the RNC performs the
following operations:
l Deletes the current radio link.
l Establishes a new radio link.
l Sends a CELL UPDATE CONFIRM message to the UE with the parameters of the new
radio link to the cell that receives the CELL UPDATE message.
3.
The criteria for radio link failure involve some timers and constants. A timer (T313) is started
after the UE detects a certain number (N313) of consecutive "out of sync" indications from layer
1 (L1). If there is no enough number (N315) of consecutive "in sync" indications received from
L1 before the timer (T313) expires, the UE considers radio link failure. Related parameters are
as follows:
l
WCDMA RAN
URA-Cell Update Feature Parameter Description
For details about RBs, see section 6.3 Signalling Radio Bearers in 3GPP TS 25.331 V9.11.0.
WCDMA RAN
URA-Cell Update Feature Parameter Description
The UE sends the RNC a URA UPDATE message with either of the following update
causes in the "URA update cause" information element (IE): "periodical URA update" or
"change of URA".
2.
The RNC responds to the "URA update cause" IE and then sends a URA UPDATE
CONFIRM message to the UE.
The RNC performs different operations for different URA update causes. For details about
these operations, see section 8.3.1.5 "Reception of an CELL UPDATE/URA UPDATE
message by the UTRAN" in 3GPP TS 25.331 V6.6.0.
WCDMA RAN
URA-Cell Update Feature Parameter Description
The UE in URA_PCH state establishes an RAB on RNC 1. In this procedure, RNC 1 is the
Serving RNC (SRNC) and RNC 2 is the Drift RNC (DRNC).
The signaling procedure is as follows:
1.
The UE in URA_PCH state sends RNC 2 a URA UPDATE message after URA reselection.
2.
The RNC 2 receives the URA UPDATE message from CCCH. Then, RNC 2 sends RNC
1 an UPLINK SIGNALLING TRANSFER INDICATION message, which includes target
RNC-ID, allocated C-RNTI, and D-RNTI.
3.
4.
10
WCDMA RAN
URA-Cell Update Feature Parameter Description
5.
RNC 2 prepares L2 resources for RNC 1 relocation and then sends a RELOCATION
REQUEST ACKNOWLEDGE message to the CN.
6.
The CN sends RNC 1 a RELOCATION COMMAND message, notifying RNC 1 that SRNS
relocation starts.
7.
RNC 1 completes related preparations such as stopping signaling and traffic RLCs. Then,
RNC 1 sends a RELOCATION COMMIT message to RNC 2.
8.
RNC 2 sends the CN a RELOCATION DETECT message, notifying the CN that the
relocation starts. Then, RNC 2 performs related operations such as L2 configuration.
9.
RNC 2 sends the UE a URA UPDATE CONFIRM message in the new cell. The message
includes the old S-RNTI and SRNC ID as well as the new S-RNTI, and C-RNTI.
10. The UE sends a RRC message UTRAN MOBILITY INFORMATION CONFIRM to RNC
2.
11. RNC 2 sends a RELOCATION COMPLETE message to the CN.
12. RNC 2 sends the UE a UE CAPABILITY ENQUIRY message, querying the capability
information about the UE.
13. The UE sends RNC 2 a UE CAPABILITY INFORMATION message, including the
capability information about the UE.
14. RNC 2 receives the UE CAPABILITY INFORMATION message and sends a UE
CAPABILITY INFORMATION CONFIRM message to the UE.
15. RNC 2 sends the UE a UTRAN MOBILITY INFORMATION message, notifying the UE
of the new UTRAN information.
16. The UE sends a UTRAN MOBILITY INFORMATION CONFIRM message to RNC 2.
17. The CN sends RNC 1 an IU RELEASE COMMAND message, requesting RNC 1 to release
the Iu interface resource related to this UE.
18. RNC 1 sends an IU RELEASE COMPLETE message to the CN.
11
WCDMA RAN
URA-Cell Update Feature Parameter Description
The UE sends the RNC a CELL UPDATE message with a cause in the "cell update cause"
IE.
2.
The RNC performs the corresponding processing, and then sends the UE a CELL UPDATE
CONFIRM message.
When the RNC requires a response from the UE, the RNC starts timer T381 whose length
is specified by the T381 parameter after sending the UE a CELL UPDATE CONFIRM
message. This is to increase the cell update success rate.
If timer T381 expires but the RNC does not receive a response from the UE, the RNC
resends the UE a CELL UPDATE CONFIRM message and restarts timer T381 when the
number of times this message is resent is less than the value of the N381 parameter.
If timer T381 expires but the RNC receives the CELL UPDATE message again from the
UE, the RNC stops timer T381.
During CELL_PCH/URA_PCH-to-CELL_FACH (P2F) state transitions triggered by cell
updates, the P2F_CUC_REPEAT_SWITCH under the OptimizationSwitch3 parameter
in the SET URRCTRLSWITCH command controls whether to resend a CELL UPDATE
CONFIRM message to UEs.
3.
12
WCDMA RAN
URA-Cell Update Feature Parameter Description
If the UE changes from CELL_PCH state to URA_PCH state through cell update, the procedure
is as follows:
1.
The UE is in CELL_PCH state and sends a CELL UPDATE message with the cause "cell
reselection".
2.
If the RNC decides to switch the state of this UE from CELL_PCH to URA_PCH, the RNC
sends the CELL UPDATE CONFIRM message to the UE and sets the "RRC State
Indicator" IE as URA_PCH.
3.
The UE enters the URA_PCH state upon reception of the CELL UPDATE CONFIRM
message.
13
WCDMA RAN
URA-Cell Update Feature Parameter Description
14
WCDMA RAN
URA-Cell Update Feature Parameter Description
1.
The UE reselects a cell under RNC 2 and sends RNC 2 a CELL UPDATE message.
2.
RNC 2 allocates a C-RNTI and a D-RNTI for the UE. RNC 2 forwards the CELL UPDATE
message received from the CCCH to RNC 1 through an UPLINK SIGNALLING
TRANSFER INDICATION message.
3.
4.
5.
RNC 2 prepares L2 resources for RNC 1 relocation, and then sends the CN a
RELOCATION REQUEST ACKNOWLEDGE message.
6.
The CN sends RNC 1 a RELOCATION COMMAND message, notifying RNC 1 that SRNS
relocation starts.
7.
RNC 1 completes related preparations such as stopping signaling and traffic RLCs, and
then sends RNC 2 a RELOCATION COMMIT message, requesting RNC 2 to start the
relocation.
8.
RNC 2 sends the CN a RELOCATION DETECT message, notifying the CN that the
relocation starts. Then, RNC 2 performs related operations such as L2 configuration.
9.
RNC 2 sends the UE a CELL UPDATE CONFIRM message in the new cell, including the
new C-RNTI and S-RNTI.
15
WCDMA RAN
URA-Cell Update Feature Parameter Description
Figure 3-5 Example signaling procedure of cell update due to a downlink radio link failure
When receiving a cell update message, the RNC establishes a new RL and deletes the old RL.
The new RL is specified in the cell update message.
If the first attempt to re-establish the RL fails, the RRC connection will be released.
This procedure is supported for both CS and PS RAB.
For PS RAB, this procedure is supported for both DCH and HSDPA bearer.
More detailed description of this procedure is as follows:
1.
The UE initiates the re-establishment of the RRC connection in the new cell by sending a
CELL UPDATE message on the CCCH.
2.
The RNC allocates radio resources in the new cell and sends an NBAP message RADIO
LINK SETUP REQUEST to the new NodeB.
3.
The NodeB allocates resources and responds with an NBAP message RADIO LINK
SETUP RESPONSE.
4.
The RNC initiates the setup of Iub data transport bearer by using the Access Link Control
Application Protocol (ALCAP) protocol.
5.
The RNC sends the old NodeB a RADIO LINK DELETION REQUEST message to release
the old Iub radio link.
6.
Upon releasing the old Iub radio link, the old NodeB sends the RNC a RADIO LINK
DELECTION RESPONSE message.
7.
The RNC initiates the release of Iub data transport bearer with the old NodeB by using the
ALCAP protocol.
8.
The RNC prepares a CELL UPDATE CONFIRM message and sends it to the UE on the
DCCH.
16
WCDMA RAN
URA-Cell Update Feature Parameter Description
9.
The UE re-establishes radio connection in the new cell and sends the PHYSICAL
CHANNEL RECONFIGURATION COMPLETE, RADIO REARER
RECONFIGURATION COMPLETE, RADIO BEARER RELEASE COMPLETE, or
TRANSPORT CHANNEL RECONFIGURATION COMPLETE message to the RNC.
Step 4 through step 7 are necessary only when ATM transmission is used over the Iub interface.
This function is enabled when the parameter value specific to a cell update cause is greater
than the Ec/N0 included in the CELL UPDATE message that contains the cell update cause.
Cell update causes are specified by the CellUpdtCause parameter. To set the mapping between
CellUpdtCause and FachPowerCellUpdtEcNoThd, run the SET
UCELLUPDTCTRLSWITCH command.
This function takes effect in the following scenarios:
l
Timer T381 whose length is specified by the T381 parameter expires and the RNC resends
a CELL UPDATE CONFIRM message to a UE.
For details about how the RNC resends CELL UPDATE CONFIRM messages, see section
3.2.2 Signaling Procedure of Cell Update.
Timer T302 whose length is specified by the T302 parameter expires, a UE resends a CELL
UPDATE message to the RNC, and the RNC sends a CELL UPDATE CONFIRM message
to the UE.
After sending a CELL UPDATE message to the RNC, a UE starts timer T302. If the timer
expires but the UE does not receive a CELL UPDATE CONFIRM message from the RNC,
the UE sends another CELL UPDATE message to the RNC when the number of times the
message is resent is less than the value of the N302 parameter.
After a FACH's power is compensated, the difference between the FACH transmit power and
the transmit power of the P-CPICH in the same cell is equal to the value of the
MaxFachPower parameter. When the FACH power is not compensated, the difference is equal
to the MaxFachPower value subtracted by the OffsetFACHPower value.
This function does not take effect when the downlink power load of a cell exceeds the value of
the DlOlcTrigThd parameter.
17
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
Engineering Guidelines
4.1.1 Requirements
l
Dependencies on Hardware
This feature does not have any special requirements for hardware.
License
This feature is not under license control.
4.1.2 Activation
Step 1 Run the RNC MML command SET UCORRMALGOSWITCH (CME single configuration:
UMTS Radio Global Configuration Express > Connection_Oriented RRM Switch
Configuration > Connection Oriented Algorithm Switches; CME batch modification center:
Modifying RNC Parameters in Batches) to turn on the RNC-oriented PS BE service state
transition switch.
Step 2 Run the RNC MML command SET UUESTATETRANSTIMER (CME single configuration:
UMTS Radio Global Configuration Express > UE State Transition Parameter Configuration >
RNC StateTrans Timer Parameters; CME batch modification center: Modifying RNC
Parameters in Batches) to set the parameters BE DCH to FACH Transition Timer[s] and BE
FACH or E_FACH to PCH Transition Timer[s] to 30s and 60s respectively.
Step 3 Run the RNC MML command SET UPSINACTTIMER (CME single configuration: UMTS
Radio Global Configuration Express > PS Permanent Online Detection Timer Configuration >
PS User Inactive Detecting Timer; CME batch modification center: Modifying RNC Parameters
in Batches) to set inactivity detection timers for PS services.
Step 4 Run the RNC MML command SET UCONNMODETIMER (CME single configuration: UMTS
Radio Global Configuration Express > UE Timers and Constants Configuration > UE Timers
Issue Draft A (2014-01-20)
18
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
And Constants in Connected Mode; CME batch modification center: Modifying RNC
Parameters in Batches) to set the periodic cell update timer to 5 minutes.
Step 5 Set CELL1 and CELL2 of the RNC as intra-frequency neighboring cells. For details, see the
BSC6900 UMTS Initial Configuration Guide or BSC6910 UMTS Initial Configuration Guide.
----End
19
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
4.1.4 Deactivation
None
20
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
4.2.1 Requirements
l
Dependencies on Hardware
This feature does not have any special requirements for hardware.
License
This feature is not under license control.
Others
The neighbouring RNC should support this feature.
4.2.2 Activation
Step 1 Run the RNC MML command SET UCORRMALGOSWITCH (CME single configuration:
UMTS Radio Global Configuration Express > Connection_Oriented RRM Switch
Configuration > Connection Oriented Algorithm Switches; CME batch modification center:
Modifying RNC Parameters in Batches) to turn on the RNC-oriented PS BE service state
transition switch.
Step 2 Run the RNC MML command SET UUESTATETRANSTIMER (CME single configuration:
UMTS Radio Global Configuration Express > UE State Transition Parameter Configuration >
RNC StateTrans Timer Parameters; CME batch modification center: Modifying RNC
Parameters in Batches) to set the parameter BE DCH to FACH Transition Timer to 30s.
Step 3 Run the RNC MML command SET UPSINACTTIMER (CME single configuration: UMTS
Radio Global Configuration Express > PS Permanent Online Detection Timer Configuration >
PS User Inactive Detecting Timer; CME batch modification center: Modifying RNC Parameters
in Batches) to set inactivity detection timers for PS services.
Step 4 Configure intra-frequency neighboring cells controlled by different RNCs. For details, see the
Configuring an Intra-Frequency Neighboring Cell.
Step 5 Run the RNC MML command MOD UNRNC (CME single configuration: IUR Configuration
Express > Neighbouring RNC > Neighboring RNC; CME batch modification center: not
supported) to set the parameter IUR CCH support flag to YES.
----End
NOTE
21
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
4.2.4 Deactivation
This feature does not need to be deactivated.
4.3.1 Requirements
l
Dependencies on Hardware
This feature does not have any special requirements for hardware.
License
This feature is not under license control.
4.3.2 Activation
Step 1 Run the RNC MML command SET UCORRMALGOSWITCH (CME single configuration:
UMTS Radio Global Configuration Express > Connection_Oriented RRM Switch
Configuration > Connection Oriented Algorithm Switches; CME batch modification center:
Modifying RNC Parameters in Batches) to select
DRA_PS_BE_STATE_TRANS_SWITCH from the Dynamic Resource Allocation Switch
drop-down list to turn on the RNC-oriented PS BE service state transition switch.
Issue Draft A (2014-01-20)
22
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
Step 2 Optional: Run the RNC MML command SET UCORRMALGOSWITCH (CME single
configuration: UMTS Radio Global Configuration Express > Connection_Oriented RRM
Switch Configuration > Connection Oriented Algorithm Switches; CME batch modification
center: Modifying RNC Parameters in Batches). In this step, select the DRA_F2U_SWITCH
check box under the parameter Dynamic Resource Allocation Switch to enable state transition
from CELL_FACH to URA_PCH directly.
Step 3 Run the RNC MML command SET UUESTATETRANSTIMER (CME single configuration:
UMTS Radio Global Configuration Express > UE State Transition Parameter Configuration >
RNC StateTrans Timer Parameters; CME batch modification center: Modifying RNC
Parameters in Batches) to set the Cell Reselection Timer, BE DCH to FACH Transition
Timer, and BE FACH or E_FACH to PCH Transition Timer parameters to 60s, 10s, and 10s
respectively.
Step 4 Run the RNC MML command SET UPSINACTTIMER (CME single configuration: UMTS
Radio Global Configuration Express > PS Permanent Online Detection Timer Configuration >
PS User Inactive Detecting Timer; CME batch modification center: Modifying RNC Parameters
in Batches) to set inactivity detection timers for PS services.
Step 5 Run the RNC MML command SET UCONNMODETIMER (CME single configuration: UMTS
Radio Global Configuration Express > UE Timers and Constants Configuration > UE Timers
And Constants in Connected Mode; CME batch modification center: Modifying RNC
Parameters in Batches) to set the periodic cell update timer to 5 minutes.
Step 6 Configure intra-frequency neighboring cells. For details, see the BSC6900 UMTS Initial
Configuration Guide or BSC6910 UMTS Initial Configuration Guide.
----End
23
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
reselection after the Cell Reselection Timer[s] expires. Search for the last
RRC_CELL_UPDATE_CONFIRM message in trace data. The value of the rrcstateindicator IE should be URA_PCH.
l If the switch is on: Do not send any data from the UE for another while. Then, the network
side should perform UE transition to URA_PCH state through the RRC_RB_RECFG
message, and the value of the rrc-stateindicator IE should be URA_PCH.
Step 8 Keep the UE in URA_PCH state. Perform another cell reselection between CELL1 and CELL2
so as to trigger URA update. The UE should send the RRC_URA_UPDATE message to the
RNC, with the cell update cause of changeofURA, and the RNC should send the
RRC_URA_UPDATE_CONFIRM message to the UE.
----End
4.3.4 Deactivation
This feature does not need to be deactivated.
4.4.1 Requirements
l
Dependencies on Hardware
This feature does not have any special requirements for hardware.
License
24
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
Others
The neighbouring RNC should support this feature.
4.4.2 Activation
Step 1 Configure the Iur interface. For details, see the BSC6900 UMTS Initial Configuration Guide or
BSC6910 UMTS Initial Configuration Guide.
Step 2 Run the RNC MML command ADD UCELLURA (CME single configuration: UMTS Cell
Configuration Express > Cell Basic Information > Cell URA; CME batch modification center:
not supported) to configure CELL1 and CELL2 to make them belong to different URAs.
NOTE
Step 3 On the RNC1 side, run the RNC MML command SET UCORRMALGOSWITCH (CME single
configuration: UMTS Radio Global Configuration Express > Connection_Oriented RRM
Switch Configuration > Connection Oriented Algorithm Switches; CME batch modification
center: Modifying RNC Parameters in Batches) to turn on the RNC-oriented PS BE service state
transition switch.
Step 4 Optional: Run the RNC MML command SET UCORRMALGOSWITCH (CME single
configuration: UMTS Radio Global Configuration Express > Connection_Oriented RRM
Switch Configuration > Connection Oriented Algorithm Switches; CME batch modification
center: Modifying RNC Parameters in Batches). In this step, select the DRA_F2U_SWITCH
check box under the parameter Dynamic Resource Allocation Switch to enable state transition
from CELL_FACH to URA_PCH directly.
Step 5 Run the RNC MML command SET UUESTATETRANSTIMER (CME single configuration:
UMTS Radio Global Configuration Express > UE State Transition Parameter Configuration >
RNC StateTrans Timer Parameters; CME batch modification center: Modifying RNC
Parameters in Batches) to set the Cell Reselection Timer, BE DCH to FACH Transition
Timer, and BE FACH or E_FACH to PCH Transition Timer parameters to 60s, 10s, and 10s
respectively.
Step 6 Run the RNC MML command SET UUESTATETRANS (CME single configuration: UMTS
Radio Global Configuration Express > UE State Transition Parameter Configuration > UE State
Translating Parameters; CME batch modification center: Modifying RNC Parameters in
Batches) to set the parameter Cell Reselection Counter Threshold to 1.
Step 7 Run the RNC MML command SET UPSINACTTIMER (CME single configuration: UMTS
Radio Global Configuration Express > PS Permanent Online Detection Timer Configuration >
PS User Inactive Detecting Timer; CME batch modification center: Modifying RNC Parameters
in Batches) to set inactivity detection timers for PS services.
Step 8 Configure intra-frequency neighboring cells. For details, see the BSC6900 UMTS Initial
Configuration Guide or BSC6910 UMTS Initial Configuration Guide.
Step 9 Run the RNC MML command MOD UNRNC (CME single configuration: IUR Configuration
Express > Neighbouring RNC > Neighboring RNC; CME batch modification center: not
supported) to enable the setup of command channels on the Iur interface.
----End
Issue Draft A (2014-01-20)
25
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
4.4.4 Deactivation
This feature does not need to be deactivated.
26
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
2.
Calculate the cell update success rate for different cell update causes using RNC
counters listed in section Performance Monitoring.
b.
Determine the cell update causes with a low cell update success rate. For example,
you can apply this function to cell update causes whose cell update success rate is
lower than the general cell update success rate of the related cell.
3.
Run the RNC MML command LST UFACH to locate a FACH whose Bearing Signal
Indication is set to TRUE. Then, obtain the values of the Max Transmit Power of
FACH and Offset between Initial and Max FACHPower parameters for this FACH.
NOTE
4.5.3 Deployment
This section describes how to activate, verify, and deactivate the function of automatic FACH
power compensation during cell updates.
Requirements
l
Dependencies on Hardware
None
License
27
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
Others
None
Data Preparation
Table 4-1 lists the data to prepare before deploying the automatic FACH power compensation
in case of cell update failures function.
Table 4-1 Data to prepare before deploying the automatic FACH power compensation in case
of cell update failuresfunction
Parameter Name
Parameter ID
Setting Notes
Data Source
CellUpdtCause
None
Radio Planning
(Internal
planning)
FachPowerCellUpdtEcNoThd
Radio Planning
(Internal
planning)
Max Transmit
Power of FACH
MaxFachPower
Radio Planning
(Internal
planning)
Offset between
Initial and Max
FACHPower
OffsetFACHPo
wer
Default/
Recommended
Value
Precautions
If signaling storms or traffic bursts occur, for example, during large gatherings and holidays,
this function will aggravate power resource congestion.
28
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
Run the RNC MML command LST UFACH to locate a FACH whose Bearing Signal
Indication is set to TRUE.
----End
When configuring the Automatic FACH Power Compensation During Cell Updates function on the CME,
perform a single configuration first, and then perform a batch modification if required.
Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.
MO
NE
Parameter
Name
Parameter ID
Config
urable
in CME
Batch
Modific
ation
Center
UCELLUPDTCTRLSWITCH
RNC
cell update
cause
CellUpdtCause
Yes
29
WCDMA RAN
URA-Cell Update Feature Parameter Description
SN
MO
4 Engineering Guidelines
NE
UFACH
RNC
NOTE
Perform this operation on
only FACHs that carry
signaling messages. Run the
RNC MML command LST
UFACH to locate a FACH
whose Bearing Signal
Indication is set to TRUE.
Parameter
Name
Parameter ID
Ec/N0
threshold for
determining
whether to add
power on
FACH
FachPowerCellUpdtEcNoThd
Max Transmit
Power of
FACH
MaxFachPower
Offset between
Initial and Max
FACHPower
OffsetFACHPow
er
Config
urable
in CME
Batch
Modific
ation
Center
No
Activation Observation
On an RNC LMT, start a cell tracing task.
l
If the value of the Transmit Power Level IE included in a FACH FP is 0 (as shown in
Figure 4-1), the function has been enabled.
NOTE
This function does not take effect if a cell enters the overload control state due to downlink power
congestion.
If the IE value is equal to the Offset between Initial and Max FACHPower value (as
shown in Figure 4-2), the function does not take effect.
Figure 4-1 IE value when a CELL UPDATE CONFIRM message is carried over a DCCH
30
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
NOTE
When a CELL UPDATE CONFIRM message is carried over a DCCH, the Cell update message is not
included in the cell tracing results.
Figure 4-2 IE value when a CELL UPDATE CONFIRM message is carried over a CCCH
31
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
When configuring the Automatic FACH Power Compensation During Cell Updates function feature on
the CME, perform a single configuration first, and then perform a batch modification if required.
Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.
MO
NE
Parameter
Name
Parameter ID
UCELLUPDTCTRLSWITCH
RNC
cell update
cause
CellUpdtCause
Ec/N0
threshold for
determining
whether to add
power on
FACH
FachPowerCellUpdtEcNoThd
Config
urable
in CME
Batch
Modific
ation
Center
32
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
Cell update success rate = (Number of successful cell updates/Number of cell update attempts)
*100%
The preceding formula can also be used to calculate the cell update success rate for the entire
cell.
Table 4-4 Counters related to the number of cell update attempts due to different reasons
Counter ID
Counter Name
Description
67192569
VS.AttCellUpdt
67180378
VS.AttCellUpdt.RLFail
67192571
VS.AttCellUpdt.ErrTRB
67192570
VS.AttCellUpdt.ErrSRB
67180372
VS.AttCellUpdt.Prd
67180373
VS.AttCellUpdt.Resel
67180374
VS.AttCellUpdt.RSA
67180375
VS.AttCellUpdt.PageRsp
67180376
VS.AttCellUpdt.ULDataTrans
Table 4-5 Counters related to the number of successful cell updates with different reasons
Counter ID
Counter Name
Description
67180371
VS.SuccCellUpdt
67189767
VS.SuccCellUpdt.RLFail
67192572
VS.SuccCellUpdt.ErrTRB
73423781
VS.SuccCellUpdt.ErrSRB
33
WCDMA RAN
URA-Cell Update Feature Parameter Description
4 Engineering Guidelines
Counter ID
Counter Name
Description
67180379
VS.SuccCellUpdt.Prd
67180380
VS.SuccCellUpdt.Resel
67180381
VS.SuccCellUpdt.Rsa
67180382
VS.SuccCellUpdt.PageRsp
67180383
VS.SuccCellUpdt.ULDataTrans
4.5.6 Troubleshooting
None
34
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameters
NE
MML
Command
Feature ID
Feature Name
Description
PROCESSSWI
TCH4
BSC6900
SET
URRCTRLSWI
TCH
WRFD-010510
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Meaning:1)
AMR_HHO_F
AIL_ROLLBA
CK_SWITCH
(Hard Handover
Failure Rollback
Switch for CS
AMR Speech
Services) 1: This
switch is turned
on. The RNC
supports
rollback caused
by failed hard
handovers of CS
AMR speech
services. It is
recommended
that the timer
T312 be set to 1
second (SET
UCONNMODE
TIMER:
T312=1;) before
turning on this
switch. If the
timer T312 is not
set to 1 second,
AMR noise will
occur on some
UEs. If the
WRFD-010609
02
WRFD-010101
WRFD-140226
WRFD-140103
WRFD-020400
02
WRFD-140205
WRFD-020302
WRFD-020303
WRFD-020304
WRFD-020305
WRFD-020306
Combination of
One CS Service
and One PS
Service
3GPP R9
Specifications
Fast Return
from UMTS to
LTE
Call
Reestablishment
Inter System
Direct Retry
Voice Service
Experience
Improvement
for Weak
Reception Ues
Inter Frequency
Hard Handover
Based on
Coverage
35
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Inter-RAT
Handover Based
on Coverage
AMRC feature
is enabled, the
RNC supports
the hard
handover failure
rollback of only
for 12.2 kbit/s
narrowband
AMR services.
0: This switch is
turned off. The
RNC does not
support rollback
caused by failed
hard handovers
of CS AMR
speech services,
leading to call
drops. 2)
RRC_CONN_S
ETUP_OPT_S
WITCH (RRC
CONNECTION
SETUP
Message
Optimization
Switch)
Whether
optimization of
the RRC
CONNECTION
SETUP message
takes effect. 1:
This switch is
turned on.
Optimization of
the RRC
CONNECTION
SETUP message
takes effect. If
the IE RLC info
under SRB3 or
SRB4 in the
RRC
CONNECTION
SETUP message
contains the
same
Inter Frequency
Hard Handover
Based on DL
QoS
Inter-RAT
Handover Based
on Service
Inter-RAT
Handover Based
on Load
36
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
information as
that under
SRB2, the RNC
replaces the IE
RLC info under
SRB3 or SRB4
with the IE same
as RB:0x2(2) to
shorten the
length of the
message. 0: This
switch is turned
off. The RNC
does not replace
the IE RLC info
under SRB3 or
SRB4 in the
RRC
CONNECTION
SETUP
message. 3)
PS_F2D_OVER
LAP_CELLUP
T_SWITCH
(Switch for
Simultaneous
PS Service
Setup F2D and
Cell Update
Procedures)
During the PS
service setup,
the RNC undoes
a CELL_FACHto-CELL_DCH
(F2D for short)
procedure when
it receives a Cell
Update message
with the cause
value "cell
reselection"
during the F2D
procedure. 1:
This switch is
turned on. The
RNC
temporarily
37
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
does not send the
RANAP_RAB_
ASSIGNMENT
_RESP message
to the CN after
the F2D
procedure is
undone and
waits until the
Cell Update
message is
processed and
the PS service is
set up
successfully. 0:
This switch is
turned off. The
RNC directly
responds to the
CN with a
RANAP_RAB_
ASSIGNMENT
_RESP message
with the cause
value
"IU_UNSPEC_
FAIL" after the
F2D procedure
is undone,
indicating that
the PS service
fails to be set up.
4)
TCP_ACK_AC
CELERATOR_
SWITCH
(Switch for
Throughput
Increase in the
Case of
Simultaneous
uplink and
downlink
Transmissions)
This switch is
turned on to
increase the total
throughput in
38
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
the uplink and
downlink only
when uplink and
downlink HSPA
data is
transmitted
simultaneously.
In other
scenarios, you
are advised to
turn off the
switch. 1: This
switch is turned
on. The function
of increasing the
total throughput
in the case of
simultaneous
uplink and
downlink
transmissions
takes effect. 0:
This switch is
turned off. The
function of
increasing the
total throughput
in the case of
simultaneous
uplink and
downlink
transmissions
does not take
effect. 5)
PHY_RECFG_
REEST_SWIT
CH (Switch for
RL
Reestablishment
s During the
Physical
Channel
Reconfiguration
) 1: This switch
is turned on.
When UE sends
the RNC a Cell
Update message
39
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
with the cause
value "Radio
Link Failure",
the RNC
reestablishes the
radio link for the
UE under the
following
conditions: The
UE has not
responded to the
Physical
Channel
Reconfiguration
message. The
RNC detects
interrupted
downlink
transmission on
SRB2 or the
NodeB reports
that all radio
links of the UE
are out of
synchronization
. 0: This switch
is turned off.
The RNC does
not reestablish
the radio link for
the UE under the
preceding
conditions. 6)
IUR_RL_REES
T_SWITCH (Iur
RL
Reestablishment
Switch) 1: This
switch is turned
on. The RNC
deletes the
existing Iur
radio links for
the UE during
the RNC
performing
radio link
reestablishment.
40
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
0: This switch is
turned off. The
RNC does not
delete the
existing Iur
radio links
during the RNC
performing
radio link
reestablishment.
7)
RB_SETUP_R
L_REEST_SWI
TCH (Switch for
RL
Reestablishment
or Cell Update
During an RB
Setup) 1: This
switch is turned
on. When the
RNC is waiting
for a UE's
response during
a radio bearer
(RB) setup
CELL_DCH-toCELL_DCH
(D2D)
procedure: The
RNC
reestablishes a
radio link (RL)
for the UE if the
RNC detects a
signaling radio
bearer (SRB)
reset at layer 2
(L2) or all uplink
RLs for the UE
are out of
synchronization
upon expiration
of the RL
Restore timer.
For the RL
reestablishment
triggered by
41
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
SRB reset
detected by
RNC, the switch
CELLUPT_RL
FAILURE_SRB
REESTAB_SW
ITCH under
"PROCESSSWI
TCH2" in the
"SET
URRCTRLSWI
TCH" command
should be turned
on. The RNC
performs a cell
update if the
RNC receives a
CELL UPDATE
message with
the cause value
of RL
FAILURE, RLC
UNRECOVER
ABLE ERROR,
or
REENTERED
SERVICE
AREA. 0: This
switch is turned
off. When the
RNC is waiting
for a UE's
response during
an RB setup
D2D procedure,
the RNC does
not perform an
RL
reestablishment
or cell update
even if the
trigger
conditions are
met. 8)
RRC_CELLFA
CH_TRB_RES
ET_TO_F2D_S
WITCH (The
42
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CELL_FACHto-CELL_DCH
state (F2D)
transition switch
by TRB reset)
When the RNC
receives a TRB
reset request
from a UE in the
CELL_FACH
state, the RNC
cannot respond
to the UE with a
confirm
message if the
FACH is
congested. The
RRC_CELLFA
CH_TRB_RES
ET_TO_F2D_S
WITCH
parameter
specifies
whether a UE
performs an
F2D transition if
the number of
TRB reset
requests from
the UE to the
RNC reaches a
specified
threshold. 1:
This switch is
turned on. The
UE moves from
the
CELL_FACH
state to the
CELL_DCH
state. 0: This
switch is turned
off. The UE does
not move from
the
CELL_FACH
state to the
CELL_DCH
43
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
state. This
function helps to
reduce the
number of call
drops caused by
the RNC not
responding to
the TRB reset
requests during
FACH
congestion. 9)
SEND_MSG_N
ULL_SWITCH
(MM NULL
Message
Switch)
Whether the
RNC sends an
MM NULL
message to the
CS CN. If the
switch
RNC_CS_QUE
RY_UE_IMEI_
SWITCH under
PROCESSSWI
TCH2 in the
SET
URRCTRLSWI
TCH command
is turned on,
testing the
interworking
between the
RNC and the CN
is required. If the
CN needs to
verify the serial
number of direct
transfer
messages, turn
on this switch.
The RNC rather
than the CS CN
sends an
IDENTITY
REQUEST
message to a UE
44
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
to obtain its
IMEI. Upon
receiving an
IDENTITY
RESPONSE
message from
the UE: 1: This
switch is turned
on. The RNC
sends an MM
NULL message
to the CS CN. 0:
This switch is
turned off. The
RNC does not
send an MM
NULL message
to the CS CN.
10)
FD_PCH_IUR_
CS_OPT_SWIT
CH CS paging
message
processing
switch for UEs
in the
CELL_PCH or
URA_PCH state
that support fast
dormancy on the
drift radio
network
controller
(DRNC) side. 1:
This switch is
turned on. The
SRNC instructs
these UEs to
transition to the
CELL_DCH
state and to
establish CS
services when
these UEs
receive a CS
paging message.
0: This switch is
turned off. The
45
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
SRNC releases
the connection
of these UEs
when these UEs
receive a CS
paging message.
11)
CELLUPT_T31
4_T315_TIME
OUT_OPT_SW
ITCH Whether
the RNC
releases the
connection of a
UE in a state
other than
CELL_DCH
when the T314/
T315 timer in
the cell update
message
received by the
UE expires. 1:
This switch is
turned on. The
RNC continues
with the cell
update
processing when
the T314/T315
timer in the cell
update message
expires. 0: This
switch is turned
off. The RNC
abnormally
releases the
connection of
the UE when the
T314/T315
timer in the cell
update message
expires. 12)
CS_HHO_ASY
NC_CTRL_SW
ITCH
(Asynchronous
Reconfigure
46
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Switch for CS
HHO) 1: This
switch is turned
on. The RNC
does not put the
activation time
information
element (IE) in
the hard
handover
configuration
message for CS
services. After
receiving the
message, the UE
immediately
activates the
configuration. 0:
This switch is
turned off. The
RNC puts the
activation time
IE in the hard
handover
configuration
message for CS
services. After
receiving the
message, the UE
activates the
configuration at
the specified
activation time.
13)
PS_HHO_ASY
NC_CTRL_SW
ITCH
(Asynchronous
Reconfigure
Switch for PS
HHO) 1: This
switch is turned
on. The RNC
does not put the
activation time
information
element (IE) in
the hard
47
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
handover
configuration
message for PS
services. After
receiving the
message, the UE
immediately
activates the
configuration. 0:
This switch is
turned off. The
RNC puts the
activation time
IE in the hard
handover
configuration
message for PS
services. After
receiving the
message, the UE
activates the
configuration at
the specified
activation time.
14)
IUR_HHO_AS
YNC_CTRL_S
WITCH
(Asynchronous
Reconfigure
Switch for Iur
HHO) 1: This
switch is turned
on. The RNC
does not put the
activation time
information
element (IE) in
the hard
handover
configuration
message across
the Iur interface.
After receiving
the message, the
UE immediately
activates the
configuration. 0:
48
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
This switch is
turned off. The
RNC puts the
activation time
IE in the hard
handover
configuration
message across
the Iur interface.
After receiving
the message, the
UE activates the
configuration at
the specified
activation time.
15)
R8_UE_SEL_D
PUE_SWITCH
(Switch for
Preferentially
Allocating
DPUe
Resources to
UEs That
Comply with
3GPP Release 8
or Later) 1: This
switch is turned
on. The RNC
preferentially
allocates DPUe
resources in any
subrack to UEs
that comply with
3GPP Release 8
or later. 0: This
switch is turned
off. The RNC
preferentially
allocates DPU
resources in the
subrack that the
UEs access to
UEs that comply
with 3GPP
Release 8 or
later. The RNC
allocates DPU
49
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
resources in
other subracks
only when the
amount of
consumed DPU
resources in this
subrack exceeds
a preset
threshold for
inter-subrack
resource
sharing. 16)
F2P_DATATR
ANS_OPTIMIZ
E_SWITCH
(Switch for
Optimized Data
Transmission
before a State
Transition from
CELL_FACH to
CELL_PCH or
URA_PCH)
Whether the
RNC queries the
RLC state
before and after
a UE moves
from the
CELL_FACH
state to the
CELL_PCH or
URA_PCH state
due to event 4B.
A UE in the
CELL_FACH
state can move
to the
CELL_PCH or
URA_PCH state
even when there
is downlink data
transmission for
the UE. When
this occurs, data
packets are
suspended on
the RNC side.
50
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
This switch is
introduced to
solve this
problem. 1: This
switch is turned
on. The RNC
queries the RLC
state before a UE
moves from the
CELL_FACH
state to the
CELL_PCH or
URA_PCH state
due to event 4B.
If the state query
fails, the UE
does not
perform the state
transition. If the
state query
succeeds, the
UE continues
with the state
transition. The
RNC queries the
RLC state again
after the state
transition is
complete and
before the L2
link is
deactivated. If
there is SRB3,
SRB4, or TRB
data to be
transmitted to
the UE on the
RLC, the paging
procedure is
triggered. 0:
This switch is
turned off. The
original state
transition from
CELL_FACH to
CELL_PCH or
URA_PCH is
used. This
51
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
parameter is an
advanced
parameter. To
modify this
parameter,
contact Huawei
Customer
Service Center
for technical
support. 17)
IRATHO_HOC
ANCEL_RL_R
EEST_SWITC
H(Switch for RL
Reestablishment
s During the
inter-RAT
Handover) 1:
This switch is
turned on. The
RNC
reestablishes a
radio link (RL)
for the UE
during a interRAT Handover
procedure if the
RNC detects a
signaling radio
bearer (SRB)
reset at layer 2
(L2) or all uplink
RLs for the UE
are out of
synchronization
upon expiration
of the RL
Restore timer
after the RNC
sends UE a
HANDOVER
FROM UTRAN
COMMAND
message or a
CELL
CHANGE
ORDER FROM
UTRAN
52
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
message and UE
fails to receive
these two
messages. 0:
This switch is
turned off. The
RNC does not
reestablish the
radio link for the
UE under the
preceding
conditions. 18)
TRB_RESET_
RL_REEST_S
WITCH(Switch
for RL
Reestablishment
s Triggered by
TRB RESET) 1:
This switch is
turned on. The
RNC
reestablishes a
radio link (RL)
for the UE if the
RNC detects a
traffic radio
bearer (TRB)
reset at layer 2
(L2) under the
following
conditions: UE
is in
CELL_DCH
state and UE is
not in any
signaling
procedure. UE
has only one PS
RAB. 0: This
switch is turned
off. The RNC
does not
reestablish the
radio link for the
UE under the
preceding
conditions. 19)
53
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RB_REL_RL_
REEST_SWIT
CH(Switch for
RL
Reestablishment
s During a PS
RB Release) 1:
This switch is
turned on. The
RNC
reestablishes a
radio link (RL)
for the UE
during a PS
radio bearer
(RB) release
procedure under
the following
conditions: The
RNC detects a
signaling radio
bearer (SRB)
reset at layer 2
(L2) or all uplink
RLs for the UE
are out of
synchronization
upon expiration
of the RL
Restore timer or
UE has no
response to
RNC after RNC
sends UE a
RADIO
BEARER
RELEASE
message. The
UE has both CS
RAB and PS
RAB. The UE is
in CELL_DCH
state. It is
recommended
that this switch
be used together
with the
RB_RLREEST
54
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
_AM_TRB_RL
C_REEST_SWI
TCH in the
"OptimizationSwitch4"
parameter in the
"SET
URRCTRLSWI
TCH"
command. 0:
This switch is
turned off. The
RNC does not
reestablish the
radio link for the
UE under the
preceding
conditions. 20)
RB_SETUP_E
NHANCE_RL_
REEST_SWIT
CH(Switch for
Enhanced RL
Reestablishment
s During an RB
setup) 1: This
switch is turned
on. The RNC
reestablishes a
radio link (RL)
for the UE
during a radio
bearer (RB)
setup
CELL_DCH-toCELL_DCH
(D2D)
procedure under
the following
conditions: The
RNC detects a
signaling radio
bearer (SRB)
reset at layer 2
(L2) or all uplink
RLs for the UE
are out of
synchronization
55
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
upon expiration
of the RL
Restore timer
and the UE has
received the
RADIO
BEARER
SETUP
message. The
UE has no
response to the
RNC after the
RNC sends UE a
RADIO
BEARER
SETUP
message. The
switch
RB_SETUP_R
L_REEST_SWI
TCH under
"PROCESSSWI
TCH4" in the
"SET
URRCTRLSWI
TCH" command
should be turned
on. And it is
recommended
that the
RB_RLREEST
_AM_TRB_RL
C_REEST_SWI
TCH and
RB_SETUP_U
M_TRB_RLRE
EST_ADJUD_
OPT_SWITCH
in the
"OptimizationSwitch4"
parameter in the
"SET
URRCTRLSWI
TCH" command
be set to on. 0:
This switch is
turned off. The
56
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RNC does not
reestablish the
radio link for the
UE under the
preceding
conditions. 21)
RAB_SETUPM
OD_CNT_FIX_
SWITCH
Whether to
correct the
methods for
measuring the
counters related
to RAB setup or
reconfiguration
failures of UEs
in the
CELL_FACH
state. The RAB
setup or
reconfiguration
is triggered by
the F2F or F2D
state transition.
This switch is
turned off by
default. 1: This
switch is turned
on. The
measurement
methods of these
counters are
corrected based
on the
measurement
points. 0: This
switch is turned
off. The
measurement
methods of these
counters remain
unchanged. 22)
PCH_UE_RLC
_UNRECOVER
ABLEERROR_
SWITCH
Whether to
57
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
reestablish the
call for the UE
that sends a
CELL UPDATE
message with
the cause value
"RLC
unrecoverable
error" in the
CELL_PCH or
URA_PCH
state. 1: This
switch is turned
on. The RNC
reestablishes the
call for the UE
that sends a
CELL UPDATE
message with
the cause value
"RLC
unrecoverable
error" in the
CELL_PCH or
URA_PCH
state. 0: This
switch is turned
off. The RNC
does not
reestablish the
call for the UE
that sends a
CELL UPDATE
message with
the cause value
"RLC
unrecoverable
error" in the
CELL_PCH or
URA_PCH
state. 23)
FAST_RETUR
N_LTE_BY_C
ELL_SELECT_
SWITCH
Whether a
UMTS/LTE UE
performs fast
58
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
cell reselection.
1: This switch is
turned on. If the
best cell is
configured with
a neighboring
LTE cell and its
priority is lower
than the priority
of the
neighboring
LTE cell, the UE
performs fast
cell reselection.
0: This switch is
turned off. The
UE does not
perform fast cell
reselection. 24)
UL_DUAL_M
ODE_UE_D2P
_OR_D2I_SWI
TCH Whether a
UMTS/LTE UE
transits from
CELL_DCH to
CELL_PCH or
from
CELL_DCH to
the idle mode
when an
inactivity timer
expires. The
inactivity timer
is specified by
the PsInactTmrForFstDrmDch
parameter in the
SET
UPSINACTTI
MER command.
1: This switch is
turned on. The
UMTS/LTE UE
transits from
CELL_DCH to
the idle mode
when the
59
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
inactivity timer
expires. 0: This
switch is turned
off. The UMTS/
LTE UE transits
from the
CELL_DCH to
CELL_PCH
when the
inactivity timer
expires. 25)
PHYCHRECFG
_ENH_RL_RE
EST_SWITCH
Whether the
enhanced
function of call
reestablishment
during physical
channel
reconfiguration
takes effect.
Whether to
preferentially
process a CELL
UPDATE
message when
physical channel
reconfiguration
is in progress.
The RNC
receives a CELL
UPDATE
message from a
UE with a cause
value of "radio
link failure",
"RLC
unrecoverable
error", or "reentering service
area" when
expecting a
response from
the UE to the
physical channel
reconfiguration
process. In this
60
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
scenario, 1: This
switch is turned
on. The RNC
preferentially
processes the
CELL UPDATE
message. 0: This
switch is turned
off. The RNC
does not
preferentially
process the
CELL UPDATE
message. This
parameter takes
effect only when
the
PHYCHRECFG
_ENH_RL_RE
EST_SWITCH
check box under
the
"PROCESSSWI
TCH4"
parameter in the
"SET
URRCTRLSWI
TCH" command
is selected. 26)
RBRECFG_EN
H_RL_REEST_
SWITCH
Whether the
enhanced
function of call
reestablishment
during RB
reconfiguration
takes effect.
Whether to
preferentially
process a CELL
UPDATE
message when
RB
reconfiguration
is in progress.
The RNC
61
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
receives a CELL
UPDATE
message from a
UE with a cause
value of "radio
link failure",
"RLC
unrecoverable
error", or "reentering service
area" when
expecting a
response from
the UE to the RB
reconfiguration
process. In this
scenario, 1: This
switch is turned
on. The RNC
preferentially
processes the
CELL UPDATE
message. It is
recommended
that this switch
be used together
with the
RB_RLREEST
_AM_TRB_RL
C_REEST_SWI
TCH in the
"OptimizationSwitch4"
parameter in the
"SET
URRCTRLSWI
TCH"
command. 0:
This switch is
turned off. The
RNC does not
preferentially
process the
CELL UPDATE
message. This
parameter takes
effect only when
the
62
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RB_RECFG_R
L_REEST_SWI
TCH check box
under the
"OptimizationSwitch"
parameter in the
"SET
URRCTRLSWI
TCH" command
is selected. 27)
SMC_STOP_R
LC_SWITCH
Whether to stop
RLC entities
(except RLC
entities used by
SRB2) for
security-modeenabled UEs
whose user
signaling
(except cellrelated
signaling) is
processed by
their overflow
RNCs due to
load sharing and
that are in the
security mode.
1: This switch is
turned on. The
RNC stops RLC
entities (except
RLC entities
used by SRB2)
for such UEs.
This prevents
call drops that
are caused by the
ciphering
activation time
inconsistency
between the UEs
and RNC. 0:
This switch is
turned off. The
63
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RNC suspends
RLC entities
(except RLC
entities used by
SRB2) for such
UEs. 28)
GTP_SN_IN_R
AB_REL_INIT
_BY_UTRAN_
SWITCH
Whether the
RAB RELEASE
REQUEST or
IU RELEASE
COMPLETE
message carries
the IE GTP PDU
SN during the
release
procedure
initiated by the
UTRAN of the
PS domain. 1:
This switch is
turned on. The
RAB RELEASE
REQUEST or
IU RELEASE
COMPLETE
message carries
the IE GTP PDU
SN. For details,
see 3GPP TS
25.413. 0: This
switch is turned
off. The RAB
RELEASE
REQUEST or
IU RELEASE
COMPLETE
message does
not carry the IE
GTP PDU SN.
29)
CMP_IU_QOS
_GTP_PDU_S
N_SWITCH
Whether to
64
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
allow the
compatibility
processing of
reordering the
GTP-U DL
transmission if
the RAB
ASSIGNMENT
REQUEST
message carries
the IE Delivery
Order with the
value of
delivery-orderrequested. 1:
This switch is
turned on. The
GTP-U DL
transmission is
not reordered. 0:
This switch is
turned off. The
GTP-U DL
transmission
uses the DL GTP
PDU SN carried
by the RAB
ASSIGNMENT
REQUEST
message as the
first SN for
reordering. 30)
DL_TRB_RES
ET_BUFF_SWI
TCH Whether
not to
immediately
process a TRB
RESET message
if the
corresponding
TRB resets
when an RRCrelated process
is in progress.
Note that the
RRC-related
process is a
65
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
process that is
initiated after
the UE in
question has set
up a service. 1:
This switch is
turned on, The
RNC processes
the message
after the RRCrelated process
is complete. 0:
This switch is
turned off, The
RNC
immediately
processes the
message,
releases the
RAB of the UE,
and notifies the
CN that the
release is an
abnormal
release. 31)
RRC_CELLFA
CH_DL_TRB_
RESET_TO_F2
D_SWITCH
Whether to
trigger a
CELL_FACHto-CELL_DCH
state transition
for a UE not
performing any
RRC-related
process if the
RNC detects a
TRB reset. 1:
This switch is
turned on. The
RNC triggers a
CELL_FACHto-CELL_DCH
state transition
for such a UE
upon detecting a
66
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
TRB reset. 0:
This switch is
turned off. The
RNC directly
releases the
service of the
UE and notifies
the CN that the
release is an
abnormal
release. 32)
RAB_ASS_MO
D_TNL_ADDR
_SUP_SWITC
H Whether to
allow data
transmission
when the RNC
receives a RAB
ASSIGNMENT
REQUEST
message that
carries the
transport layer
information
after the PS
service has been
established. 1:
This switch is
turned on. The
RNC
reconfigures the
transport layer
information and
continues with
data
transmission.
For details, see
3GPP TS
25.413. 0: This
switch is turned
off. The RNC
does not
reconfigure the
transport layer
information and
data cannot be
transmitted.
67
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
GUI Value
Range:PS_F2D
_OVERLAP_C
ELLUPT_SWI
TCH,
AMR_HHO_F
AIL_ROLLBA
CK_SWITCH,
PHY_RECFG_
REEST_SWIT
CH,
IUR_RL_REES
T_SWITCH,
RB_SETUP_R
L_REEST_SWI
TCH,
RRC_CONN_S
ETUP_OPT_S
WITCH,
TCP_ACK_AC
CELERATOR_
SWITCH,
RRC_CELLFA
CH_TRB_RES
ET_TO_F2D_S
WITCH,
SEND_MSG_N
ULL_SWITCH,
FD_PCH_IUR_
CS_OPT_SWIT
CH,
CELLUPT_T31
4_T315_TIME
OUT_OPT_SW
ITCH,
CS_HHO_ASY
NC_CTRL_SW
ITCH,
PS_HHO_ASY
NC_CTRL_SW
ITCH,
IUR_HHO_AS
YNC_CTRL_S
WITCH,
R8_UE_SEL_D
PUE_SWITCH,
F2P_DATATR
ANS_OPTIMIZ
68
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
E_SWITCH,
IRATHO_HOC
ANCEL_RL_R
EEST_SWITC
H,
TRB_RESET_
RL_REEST_S
WITCH,
RB_REL_RL_
REEST_SWIT
CH,
RB_SETUP_E
NHANCE_RL_
REEST_SWIT
CH,
RAB_SETUPM
OD_CNT_FIX_
SWITCH,
PCH_UE_RLC
_UNRECOVER
ABLEERROR_
SWITCH,
FAST_RETUR
N_LTE_BY_C
ELL_SELECT_
SWITCH,
UL_DUAL_M
ODE_UE_D2P
_OR_D2I_SWI
TCH,
PHYCHRECFG
_ENH_RL_RE
EST_SWITCH,
RBRECFG_EN
H_RL_REEST_
SWITCH,
SMC_STOP_R
LC_SWITCH,
GTP_SN_IN_R
AB_REL_INIT
_BY_UTRAN_
SWITCH,
CMP_IU_QOS
_GTP_PDU_S
N_SWITCH,
DL_TRB_RES
ET_BUFF_SWI
TCH,
69
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RRC_CELLFA
CH_DL_TRB_
RESET_TO_F2
D_SWITCH,
RAB_ASS_MO
D_TNL_ADDR
_SUP_SWITC
H
Unit:None
Actual Value
Range:PS_F2D
_OVERLAP_C
ELLUPT_SWI
TCH,
AMR_HHO_F
AIL_ROLLBA
CK_SWITCH,
PHY_RECFG_
REEST_SWIT
CH,
IUR_RL_REES
T_SWITCH,
RB_SETUP_R
L_REEST_SWI
TCH,
RRC_CONN_S
ETUP_OPT_S
WITCH,
TCP_ACK_AC
CELERATOR_
SWITCH,
RRC_CELLFA
CH_TRB_RES
ET_TO_F2D_S
WITCH,
SEND_MSG_N
ULL_SWITCH,
FD_PCH_IUR_
CS_OPT_SWIT
CH,
CELLUPT_T31
4_T315_TIME
OUT_OPT_SW
ITCH,
CS_HHO_ASY
NC_CTRL_SW
ITCH,
70
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
PS_HHO_ASY
NC_CTRL_SW
ITCH,
IUR_HHO_AS
YNC_CTRL_S
WITCH,
R8_UE_SEL_D
PUE_SWITCH,
F2P_DATATR
ANS_OPTIMIZ
E_SWITCH,
IRATHO_HOC
ANCEL_RL_R
EEST_SWITC
H,
TRB_RESET_
RL_REEST_S
WITCH,
RB_REL_RL_
REEST_SWIT
CH,
RB_SETUP_E
NHANCE_RL_
REEST_SWIT
CH,
RAB_SETUPM
OD_CNT_FIX_
SWITCH,
PCH_UE_RLC
_UNRECOVER
ABLEERROR_
SWITCH,
FAST_RETUR
N_LTE_BY_C
ELL_SELECT_
SWITCH,
UL_DUAL_M
ODE_UE_D2P
_OR_D2I_SWI
TCH,
PHYCHRECFG
_ENH_RL_RE
EST_SWITCH,
RBRECFG_EN
H_RL_REEST_
SWITCH,
SMC_STOP_R
LC_SWITCH,
71
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
GTP_SN_IN_R
AB_REL_INIT
_BY_UTRAN_
SWITCH,
CMP_IU_QOS
_GTP_PDU_S
N_SWITCH,
DL_TRB_RES
ET_BUFF_SWI
TCH,
RRC_CELLFA
CH_DL_TRB_
RESET_TO_F2
D_SWITCH,
RAB_ASS_MO
D_TNL_ADDR
_SUP_SWITC
H
Default
Value:PS_F2D_
OVERLAP_CE
LLUPT_SWIT
CH:
0,AMR_HHO_
FAIL_ROLLB
ACK_SWITCH
:
0,PHY_RECFG
_REEST_SWIT
CH:
0,IUR_RL_RE
EST_SWITCH:
0,RB_SETUP_
RL_REEST_S
WITCH:
0,RRC_CONN_
SETUP_OPT_S
WITCH:
0,TCP_ACK_A
CCELERATOR
_SWITCH:
0,RRC_CELLF
ACH_TRB_RE
SET_TO_F2D_
SWITCH:
0,SEND_MSG_
NULL_SWITC
72
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
H:
0,FD_PCH_IU
R_CS_OPT_S
WITCH:
0,CELLUPT_T
314_T315_TIM
EOUT_OPT_S
WITCH:
0,CS_HHO_AS
YNC_CTRL_S
WITCH:
0,PS_HHO_AS
YNC_CTRL_S
WITCH:
0,IUR_HHO_A
SYNC_CTRL_
SWITCH:
0,R8_UE_SEL_
DPUE_SWITC
H:
0,F2P_DATAT
RANS_OPTIMI
ZE_SWITCH:
0,IRATHO_HO
CANCEL_RL_
REEST_SWIT
CH:
0,TRB_RESET
_RL_REEST_S
WITCH:
0,RB_REL_RL
_REEST_SWIT
CH:
0,RB_SETUP_
ENHANCE_RL
_REEST_SWIT
CH:
0,RAB_SETUP
MOD_CNT_FI
X_SWITCH:
0,PCH_UE_RL
C_UNRECOVE
RABLEERROR
_SWITCH:
0,FAST_RETU
RN_LTE_BY_
CELL_SELEC
T_SWITCH:
73
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
0,UL_DUAL_
MODE_UE_D2
P_OR_D2I_SW
ITCH:
0,PHYCHREC
FG_ENH_RL_
REEST_SWIT
CH:
0,RBRECFG_E
NH_RL_REES
T_SWITCH:
0,SMC_STOP_
RLC_SWITCH:
1,GTP_SN_IN_
RAB_REL_INI
T_BY_UTRAN
_SWITCH:
1,CMP_IU_QO
S_GTP_PDU_S
N_SWITCH:
0,DL_TRB_RE
SET_BUFF_S
WITCH:
0,RRC_CELLF
ACH_DL_TRB
_RESET_TO_F
2D_SWITCH:
0,RAB_ASS_M
OD_TNL_ADD
R_SUP_SWITC
H:1
74
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
ProcessSwitch4
BSC6910
SET
URRCTRLSWI
TCH
WRFD-010510
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Meaning:1)
AMR_HHO_F
AIL_ROLLBA
CK_SWITCH
(Hard Handover
Failure Rollback
Switch for CS
AMR Speech
Services) 1: This
switch is turned
on. The RNC
supports
rollback caused
by failed hard
handovers of CS
AMR speech
services. It is
recommended
that the timer
T312 be set to 1
second (SET
UCONNMODE
TIMER:
T312=1;) before
turning on this
switch. If the
timer T312 is not
set to 1 second,
AMR noise will
occur on some
UEs. 0: This
switch is turned
off. The RNC
does not support
rollback caused
by failed hard
handovers of CS
AMR speech
services, leading
to call drops. 2)
RRC_CONN_S
ETUP_OPT_S
WITCH (RRC
CONNECTION
SETUP
Message
Optimization
Switch)
WRFD-010609
02
WRFD-010101
WRFD-140226
WRFD-140103
WRFD-020400
02
WRFD-140205
WRFD-020302
WRFD-020303
WRFD-020304
WRFD-020305
WRFD-020306
Combination of
One CS Service
and One PS
Service
3GPP R9
Specifications
Fast Return
from UMTS to
LTE
Call
Reestablishment
Inter System
Direct Retry
Voice Service
Experience
Improvement
for Weak
Reception Ues
Inter Frequency
Hard Handover
Based on
Coverage
Inter-RAT
Handover Based
on Coverage
Inter Frequency
Hard Handover
Based on DL
QoS
Inter-RAT
Handover Based
on Service
Inter-RAT
Handover Based
on Load
75
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Whether
optimization of
the RRC
CONNECTION
SETUP message
takes effect. 1:
This switch is
turned on.
Optimization of
the RRC
CONNECTION
SETUP message
takes effect. If
the IE RLC info
under SRB3 or
SRB4 in the
RRC
CONNECTION
SETUP message
contains the
same
information as
that under
SRB2, the RNC
replaces the IE
RLC info under
SRB3 or SRB4
with the IE same
as RB:0x2(2) to
shorten the
length of the
message. 0: This
switch is turned
off. The RNC
does not replace
the IE RLC info
under SRB3 or
SRB4 in the
RRC
CONNECTION
SETUP
message. 3)
PS_F2D_OVER
LAP_CELLUP
T_SWITCH
(Switch for
Simultaneous
PS Service
76
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Setup F2D and
Cell Update
Procedures)
During the PS
service setup,
the RNC undoes
a CELL_FACHto-CELL_DCH
(F2D for short)
procedure when
it receives a Cell
Update message
with the cause
value "cell
reselection"
during the F2D
procedure. 1:
This switch is
turned on. The
RNC
temporarily
does not send the
RANAP_RAB_
ASSIGNMENT
_RESP message
to the CN after
the F2D
procedure is
undone and
waits until the
Cell Update
message is
processed and
the PS service is
set up
successfully. 0:
This switch is
turned off. The
RNC directly
responds to the
CN with a
RANAP_RAB_
ASSIGNMENT
_RESP message
with the cause
value
"IU_UNSPEC_
FAIL" after the
77
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
F2D procedure
is undone,
indicating that
the PS service
fails to be set up.
4)
TCP_ACK_AC
CELERATOR_
SWITCH
(Switch for
Throughput
Increase in the
Case of
Simultaneous
uplink and
downlink
Transmissions)
This switch is
turned on to
increase the total
throughput in
the uplink and
downlink only
when uplink and
downlink HSPA
data is
transmitted
simultaneously.
In other
scenarios, you
are advised to
turn off the
switch. 1: This
switch is turned
on. The function
of increasing the
total throughput
in the case of
simultaneous
uplink and
downlink
transmissions
takes effect. 0:
This switch is
turned off. The
function of
increasing the
total throughput
78
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
in the case of
simultaneous
uplink and
downlink
transmissions
does not take
effect. 5)
PHY_RECFG_
REEST_SWIT
CH (Switch for
RL
Reestablishment
s During the
Physical
Channel
Reconfiguration
) 1: This switch
is turned on. The
UE sends the
RNC a Cell
Update message
with the cause
value "Radio
Link Failure"
and the RNC
reestablishes the
radio link for the
UE under the
following
conditions: The
UE has not
responded to the
Physical
Channel
Reconfiguration
message. The
RNC detects
interrupted
downlink
transmission on
SRB2 or the
NodeB reports
that all radio
links of the UE
are out of
synchronization
. 0: This switch
is turned off.
79
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
The RNC does
not reestablish
the radio link for
the UE under the
preceding
conditions. 6)
IUR_RL_REES
T_SWITCH (Iur
RL
Reestablishment
Switch) 1: This
switch is turned
on. The RNC
deletes the
existing Iur
radio links for
the UE during
the RNC
performing
radio link
reestablishment.
0: This switch is
turned off. The
RNC does not
delete the
existing Iur
radio links
during the RNC
performing
radio link
reestablishment.
7)
RB_SETUP_R
L_REEST_SWI
TCH (Switch for
RL
Reestablishment
or Cell Update
During an RB
Setup) 1: This
switch is turned
on. When the
RNC is waiting
for a UE's
response during
a radio bearer
(RB) setup
CELL_DCH-to-
80
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CELL_DCH
(D2D)
procedure: The
RNC
reestablishes a
radio link (RL)
for the UE if the
RNC detects a
signaling radio
bearer (SRB)
reset at layer 2
(L2) or all uplink
RLs for the UE
are out of
synchronization
upon expiration
of the RL
Restore timer.
For the RL
reestablishment
triggered by
SRB reset
detected by
RNC, the switch
CELLUPT_RL
FAILURE_SRB
REESTAB_SW
ITCH under
"PROCESSSWI
TCH2" in the
"SET
URRCTRLSWI
TCH" command
should be turned
on. The RNC
performs a cell
update if the
RNC receives a
CELL UPDATE
message with
the cause value
of RL
FAILURE, RLC
UNRECOVER
ABLE ERROR,
or
REENTERED
SERVICE
81
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
AREA. 0: This
switch is turned
off. When the
RNC is waiting
for a UE's
response during
an RB setup
D2D procedure,
the RNC does
not perform an
RL
reestablishment
or cell update
even if the
trigger
conditions are
met. 8)
RRC_CELLFA
CH_TRB_RES
ET_TO_F2D_S
WITCH (The
CELL_FACHto-CELL_DCH
state (F2D)
transition switch
by TRB reset)
When the RNC
receives a TRB
reset request
from a UE in the
CELL_FACH
state, the RNC
cannot respond
to the UE with a
confirm
message if the
FACH is
congested. The
RRC_CELLFA
CH_TRB_RES
ET_TO_F2D_S
WITCH
parameter
specifies
whether a UE
performs an
F2D transition if
the number of
82
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
TRB reset
requests from
the UE to the
RNC reaches a
specified
threshold. 1:
This switch is
turned on. The
UE moves from
the
CELL_FACH
state to the
CELL_DCH
state. 0: This
switch is turned
off. The UE does
not move from
the
CELL_FACH
state to the
CELL_DCH
state. This
function helps to
reduce the
number of call
drops caused by
the RNC not
responding to
the TRB reset
requests during
FACH
congestion. 9)
SEND_MSG_N
ULL_SWITCH
(MM NULL
Message
Switch)
Whether the
RNC sends an
MM NULL
message to the
CS CN. If the
switch
RNC_CS_QUE
RY_UE_IMEI_
SWITCH under
PROCESSSWI
TCH2 in the
83
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
SET
URRCTRLSWI
TCH command
is turned on,
testing the
interworking
between the
RNC and the CN
is required. If the
CN needs to
verify the serial
number of direct
transfer
messages, turn
on this switch.
The RNC rather
than the CS CN
sends an
IDENTITY
REQUEST
message to a UE
to obtain its
IMEI. Upon
receiving an
IDENTITY
RESPONSE
message from
the UE: 1: This
switch is turned
on. The RNC
sends an MM
NULL message
to the CS CN. 0:
This switch is
turned off. The
RNC does not
send an MM
NULL message
to the CS CN.
10)
FD_PCH_IUR_
CS_OPT_SWIT
CH CS paging
message
processing
switch for UEs
in the
CELL_PCH or
84
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
URA_PCH state
that support fast
dormancy on the
drift radio
network
controller
(DRNC) side. 1:
This switch is
turned on. The
SRNC instructs
these UEs to
transition to the
CELL_DCH
state and to
establish CS
services when
these UEs
receive a CS
paging message.
0: This switch is
turned off. The
SRNC releases
the connection
of these UEs
when these UEs
receive a CS
paging message.
11)
CELLUPT_T31
4_T315_TIME
OUT_OPT_SW
ITCH Whether
the RNC
releases the
connection of a
UE in a state
other than
CELL_DCH
when the T314/
T315 timer in
the cell update
message
received by the
UE expires. 1:
This switch is
turned on. The
RNC continues
with the cell
85
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
update
processing when
the T314/T315
timer in the cell
update message
expires. 0: This
switch is turned
off. The RNC
abnormally
releases the
connection of
the UE when the
T314/T315
timer in the cell
update message
expires. 12)
CS_HHO_ASY
NC_CTRL_SW
ITCH
(Asynchronous
Reconfigure
Switch for CS
HHO) 1: This
switch is turned
on. The RNC
does not put the
activation time
information
element (IE) in
the hard
handover
configuration
message for CS
services. After
receiving the
message, the UE
immediately
activates the
configuration. 0:
This switch is
turned off. The
RNC puts the
activation time
IE in the hard
handover
configuration
message for CS
services. After
86
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
receiving the
message, the UE
activates the
configuration at
the specified
activation time.
13)
PS_HHO_ASY
NC_CTRL_SW
ITCH
(Asynchronous
Reconfigure
Switch for PS
HHO) 1: This
switch is turned
on. The RNC
does not put the
activation time
information
element (IE) in
the hard
handover
configuration
message for PS
services. After
receiving the
message, the UE
immediately
activates the
configuration. 0:
This switch is
turned off. The
RNC puts the
activation time
IE in the hard
handover
configuration
message for PS
services. After
receiving the
message, the UE
activates the
configuration at
the specified
activation time.
14)
IUR_HHO_AS
YNC_CTRL_S
87
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
WITCH
(Asynchronous
Reconfigure
Switch for Iur
HHO) 1: This
switch is turned
on. The RNC
does not put the
activation time
information
element (IE) in
the hard
handover
configuration
message across
the Iur interface.
After receiving
the message, the
UE immediately
activates the
configuration. 0:
This switch is
turned off. The
RNC puts the
activation time
IE in the hard
handover
configuration
message across
the Iur interface.
After receiving
the message, the
UE activates the
configuration at
the specified
activation time.
15)
F2P_DATATR
ANS_OPTIMIZ
E_SWITCH
(Switch for
Optimized Data
Transmission
before a State
Transition from
CELL_FACH to
CELL_PCH or
URA_PCH)
88
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Whether the
RNC queries the
RLC state
before and after
a UE moves
from the
CELL_FACH
state to the
CELL_PCH or
URA_PCH state
due to event 4B.
A UE in the
CELL_FACH
state can move
to the
CELL_PCH or
URA_PCH state
even when there
is downlink data
transmission for
the UE. When
this occurs, data
packets are
suspended on
the RNC side.
This switch is
introduced to
solve this
problem. 1: This
switch is turned
on. The RNC
queries the RLC
state before a UE
moves from the
CELL_FACH
state to the
CELL_PCH or
URA_PCH state
due to event 4B.
If the state query
fails, the UE
does not
perform the state
transition. If the
state query
succeeds, the
UE continues
with the state
89
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
transition. The
RNC queries the
RLC state again
after the state
transition is
complete and
before the L2
link is
deactivated. If
there is SRB3,
SRB4, or TRB
data to be
transmitted to
the UE on the
RLC, the paging
procedure is
triggered. 0:
This switch is
turned off. The
original state
transition from
CELL_FACH to
CELL_PCH or
URA_PCH is
used. This
parameter is an
advanced
parameter. To
modify this
parameter,
contact Huawei
Customer
Service Center
for technical
support. 16)
IRATHO_HOC
ANCEL_RL_R
EEST_SWITC
H(Switch for RL
Reestablishment
s During the
inter-RAT
Handover) 1:
This switch is
turned on. The
RNC
reestablishes a
radio link (RL)
90
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
for the UE
during a interRAT Handover
procedure if the
RNC detects a
signaling radio
bearer (SRB)
reset at layer 2
(L2) or all uplink
RLs for the UE
are out of
synchronization
upon expiration
of the RL
Restore timer
after the RNC
sends UE a
HANDOVER
FROM UTRAN
COMMAND
message or a
CELL
CHANGE
ORDER FROM
UTRAN
message and UE
fails to receive
these two
messages. 0:
This switch is
turned off. The
RNC does not
reestablish the
radio link for the
UE under the
preceding
conditions. 17)
TRB_RESET_
RL_REEST_S
WITCH(Switch
for RL
Reestablishment
s Triggered by
TRB RESET) 1:
This switch is
turned on. The
RNC
reestablishes a
91
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
radio link (RL)
for the UE if the
RNC detects a
traffic radio
bearer (TRB)
reset at layer 2
(L2) under the
following
conditions: UE
is in
CELL_DCH
state and UE is
not in any
signaling
procedure. UE
has only one PS
RAB. 0: This
switch is turned
off. The RNC
does not
reestablish the
radio link for the
UE under the
preceding
conditions. 18)
RB_REL_RL_
REEST_SWIT
CH(Switch for
RL
Reestablishment
s During a PS
RB Release) 1:
This switch is
turned on. The
RNC
reestablishes a
radio link (RL)
for the UE
during a PS
radio bearer
(RB) release
procedure under
the following
conditions: The
RNC detects a
signaling radio
bearer (SRB)
reset at layer 2
92
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
(L2) or all uplink
RLs for the UE
are out of
synchronization
upon expiration
of the RL
Restore timer or
UE has no
response to
RNC after RNC
sends UE a
RADIO
BEARER
RELEASE
message. The
UE has both CS
RAB and PS
RAB. The UE is
in CELL_DCH
state. It is
recommended
that this switch
be used together
with the
RB_RLREEST
_AM_TRB_RL
C_REEST_SWI
TCH in the
"OptimizationSwitch4"
parameter in the
"SET
URRCTRLSWI
TCH"
command. 0:
This switch is
turned off. The
RNC does not
reestablish the
radio link for the
UE under the
preceding
conditions. 19)
RB_SETUP_E
NHANCE_RL_
REEST_SWIT
CH(Switch for
Enhanced RL
93
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Reestablishment
s During an RB
setup) 1: This
switch is turned
on. The RNC
reestablishes a
radio link (RL)
for the UE
during a radio
bearer (RB)
setup
CELL_DCH-toCELL_DCH
(D2D)
procedure under
the following
conditions: The
RNC detects a
signaling radio
bearer (SRB)
reset at layer 2
(L2) or all uplink
RLs for the UE
are out of
synchronization
upon expiration
of the RL
Restore timer
and the UE has
received the
RADIO
BEARER
SETUP
message. The
UE has no
response to the
RNC after the
RNC sends UE a
RADIO
BEARER
SETUP
message. The
switch
RB_SETUP_R
L_REEST_SWI
TCH under
"PROCESSSWI
TCH4" in the
94
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
"SET
URRCTRLSWI
TCH" command
should be turned
on. And it is
recommended
that the
RB_RLREEST
_AM_TRB_RL
C_REEST_SWI
TCH and
RB_SETUP_U
M_TRB_RLRE
EST_ADJUD_
OPT_SWITCH
in the
"OptimizationSwitch4"
parameter in the
"SET
URRCTRLSWI
TCH" command
be set to on. 0:
This switch is
turned off. The
RNC does not
reestablish the
radio link for the
UE under the
preceding
conditions. 20)
RAB_SETUPM
OD_CNT_FIX_
SWITCH
Whether to
correct the
methods for
measuring the
counters related
to RAB setup or
reconfiguration
failures of UEs
in the
CELL_FACH
state. The RAB
setup or
reconfiguration
is triggered by
95
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
the F2F or F2D
state transition.
This switch is
turned off by
default. 1: This
switch is turned
on. The
measurement
methods of these
counters are
corrected based
on the
measurement
points. 0: This
switch is turned
off. The
measurement
methods of these
counters remain
unchanged. 21)
PCH_UE_RLC
_UNRECOVER
ABLEERROR_
SWITCH None.
22)
FAST_RETUR
N_LTE_BY_C
ELL_SELECT_
SWITCH
Whether a
UMTS/LTE UE
performs fast
cell reselection.
1: This switch is
turned on. If the
best cell is
configured with
a neighboring
LTE cell and its
priority is lower
than the priority
of the
neighboring
LTE cell, the UE
performs fast
cell reselection.
0: This switch is
turned off. The
96
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
UE does not
perform fast cell
reselection. 23)
UL_DUAL_M
ODE_UE_D2P
_OR_D2I_SWI
TCH Whether a
UMTS/LTE UE
transits from
CELL_DCH to
CELL_PCH or
from
CELL_DCH to
the idle mode
when an
inactivity timer
expires. The
inactivity timer
is specified by
the PsInactTmrForFstDrmDch
parameter in the
SET
UPSINACTTI
MER command.
1: This switch is
turned on. The
UMTS/LTE UE
transits from
CELL_DCH to
the idle mode
when the
inactivity timer
expires. 0: This
switch is turned
off. The UMTS/
LTE UE transits
from the
CELL_DCH to
CELL_PCH
when the
inactivity timer
expires. 24)
PHYCHRECFG
_ENH_RL_RE
EST_SWITCH
Whether the
enhanced
97
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
function of call
reestablishment
during physical
channel
reconfiguration
takes effect.
Whether to
preferentially
process a CELL
UPDATE
message when
physical channel
reconfiguration
is in progress.
The RNC
receives a CELL
UPDATE
message from a
UE with a cause
value of "radio
link failure",
"RLC
unrecoverable
error", or "reentering service
area" when
expecting a
response from
the UE to the
physical channel
reconfiguration
process. In this
scenario, 1: This
switch is turned
on. The RNC
preferentially
processes the
CELL UPDATE
message. 0: This
switch is turned
off. The RNC
does not
preferentially
process the
CELL UPDATE
message. This
parameter takes
effect only when
98
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
the
PHYCHRECFG
_ENH_RL_RE
EST_SWITCH
check box under
the
"PROCESSSWI
TCH4"
parameter in the
"SET
URRCTRLSWI
TCH" command
is selected. 25)
RBRECFG_EN
H_RL_REEST_
SWITCH
Whether the
enhanced
function of call
reestablishment
during RB
reconfiguration
takes effect.
Whether to
preferentially
process a CELL
UPDATE
message when
RB
reconfiguration
is in progress.
The RNC
receives a CELL
UPDATE
message from a
UE with a cause
value of "radio
link failure",
"RLC
unrecoverable
error", or "reentering service
area" when
expecting a
response from
the UE to the RB
reconfiguration
process. In this
99
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
scenario, 1: This
switch is turned
on. The RNC
preferentially
processes the
CELL UPDATE
message. It is
recommended
that this switch
be used together
with the
RB_RLREEST
_AM_TRB_RL
C_REEST_SWI
TCH in the
"OptimizationSwitch4"
parameter in the
"SET
URRCTRLSWI
TCH"
command. 0:
This switch is
turned off. The
RNC does not
preferentially
process the
CELL UPDATE
message in the
preceding
scenario. This
parameter takes
effect only when
the
RB_RECFG_R
L_REEST_SWI
TCH check box
under the
"OptimizationSwitch"
parameter in the
"SET
URRCTRLSWI
TCH" command
is selected. 26)
SMC_STOP_R
LC_SWITCH
Whether to stop
100
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RLC entities
(except RLC
entities used by
SRB2) for
security-modeenabled UEs
whose user
signaling
(except cellrelated
signaling) is
processed by
their overflow
RNCs due to
load sharing and
that are in the
security mode.
1: This switch is
turned on. The
RNC stops RLC
entities (except
RLC entities
used by SRB2)
for such UEs.
This prevents
call drops that
are caused by the
ciphering
activation time
inconsistency
between the UEs
and RNC. 0:
This switch is
turned off. The
RNC suspends
RLC entities
(except RLC
entities used by
SRB2) for such
UEs. 27)
GTP_SN_IN_R
AB_REL_INIT
_BY_UTRAN_
SWITCH
Whether the
RAB RELEASE
REQUEST or
IU RELEASE
101
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
COMPLETE
message carries
the IE GTP PDU
SN during the
release
procedure
initiated by the
UTRAN of the
PS domain. 1:
This switch is
turned on. The
RAB RELEASE
REQUEST or
IU RELEASE
COMPLETE
message carries
the IE GTP PDU
SN. For details,
see 3GPP TS
25.413. 0: This
switch is turned
off. The RAB
RELEASE
REQUEST or
IU RELEASE
COMPLETE
message does
not carry the IE
GTP PDU SN.
28)
CMP_IU_QOS
_GTP_PDU_S
N_SWITCH
Whether to
allow the
compatibility
processing of
reordering the
GTP-U DL
transmission if
the RAB
ASSIGNMENT
REQUEST
message carries
the IE Delivery
Order with the
value of
delivery-order-
102
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
requested. 1:
This switch is
turned on. The
GTP-U DL
transmission is
not reordered. 0:
This switch is
turned off. The
GTP-U DL
transmission
uses the DL GTP
PDU SN carried
by the RAB
ASSIGNMENT
REQUEST
message as the
first SN for
reordering. 29)
DL_TRB_RES
ET_BUFF_SWI
TCH Whether
not to
immediately
process a TRB
RESET message
if the
corresponding
TRB resets
when an RRCrelated process
is in progress.
Note that the
RRC-related
process is a
process that is
initiated after
the UE in
question has set
up a service. 1:
This switch is
turned on. The
RNC processes
the message
after the RRCrelated process
is complete. 0:
This switch is
turned off. The
103
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RNC
immediately
processes the
message,
releases the
RAB of the UE,
and notifies the
CN that the
release is an
abnormal
release. 30)
RRC_CELLFA
CH_DL_TRB_
RESET_TO_F2
D_SWITCH
Whether to
trigger a
CELL_FACHto-CELL_DCH
state transition
for a UE not
performing any
RRC-related
process if the
RNC detects a
TRB reset. 1:
This switch is
turned on. The
RNC triggers a
CELL_FACHto-CELL_DCH
state transition
for such a UE
upon detecting a
TRB reset. 0:
This switch is
turned off. The
RNC directly
releases the
service of the
UE and notifies
the CN that the
release is an
abnormal
release. 31)
RAB_ASS_MO
D_TNL_ADDR
_SUP_SWITC
104
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
H Whether to
allow data
transmission
when the RNC
receives a RAB
ASSIGNMENT
REQUEST
message that
carries the
transport layer
information
after the PS
service has been
established. 1:
This switch is
turned on. The
RNC
reconfigures the
transport layer
information and
continues with
data
transmission.
For details, see
3GPP TS
25.413. 0: This
switch is turned
off. The RNC
does not
reconfigure the
transport layer
information and
data cannot be
transmitted.
GUI Value
Range:PS_F2D
_OVERLAP_C
ELLUPT_SWI
TCH,
AMR_HHO_F
AIL_ROLLBA
CK_SWITCH,
PHY_RECFG_
REEST_SWIT
CH,
IUR_RL_REES
T_SWITCH,
105
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RB_SETUP_R
L_REEST_SWI
TCH,
RRC_CONN_S
ETUP_OPT_S
WITCH,
TCP_ACK_AC
CELERATOR_
SWITCH,
RRC_CELLFA
CH_TRB_RES
ET_TO_F2D_S
WITCH,
SEND_MSG_N
ULL_SWITCH,
FD_PCH_IUR_
CS_OPT_SWIT
CH,
CELLUPT_T31
4_T315_TIME
OUT_OPT_SW
ITCH,
CS_HHO_ASY
NC_CTRL_SW
ITCH,
PS_HHO_ASY
NC_CTRL_SW
ITCH,
IUR_HHO_AS
YNC_CTRL_S
WITCH,
F2P_DATATR
ANS_OPTIMIZ
E_SWITCH,
IRATHO_HOC
ANCEL_RL_R
EEST_SWITC
H,
TRB_RESET_
RL_REEST_S
WITCH,
RB_REL_RL_
REEST_SWIT
CH,
RB_SETUP_E
NHANCE_RL_
REEST_SWIT
CH,
106
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RAB_SETUPM
OD_CNT_FIX_
SWITCH,
PCH_UE_RLC
_UNRECOVER
ABLEERROR_
SWITCH,
FAST_RETUR
N_LTE_BY_C
ELL_SELECT_
SWITCH,
UL_DUAL_M
ODE_UE_D2P
_OR_D2I_SWI
TCH,
PHYCHRECFG
_ENH_RL_RE
EST_SWITCH,
RBRECFG_EN
H_RL_REEST_
SWITCH,
SMC_STOP_R
LC_SWITCH,
GTP_SN_IN_R
AB_REL_INIT
_BY_UTRAN_
SWITCH,
CMP_IU_QOS
_GTP_PDU_S
N_SWITCH,
DL_TRB_RES
ET_BUFF_SWI
TCH,
RRC_CELLFA
CH_DL_TRB_
RESET_TO_F2
D_SWITCH,
RAB_ASS_MO
D_TNL_ADDR
_SUP_SWITC
H
Unit:None
Actual Value
Range:PS_F2D
_OVERLAP_C
ELLUPT_SWI
TCH,
107
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
AMR_HHO_F
AIL_ROLLBA
CK_SWITCH,
PHY_RECFG_
REEST_SWIT
CH,
IUR_RL_REES
T_SWITCH,
RB_SETUP_R
L_REEST_SWI
TCH,
RRC_CONN_S
ETUP_OPT_S
WITCH,
TCP_ACK_AC
CELERATOR_
SWITCH,
RRC_CELLFA
CH_TRB_RES
ET_TO_F2D_S
WITCH,
SEND_MSG_N
ULL_SWITCH,
FD_PCH_IUR_
CS_OPT_SWIT
CH,
CELLUPT_T31
4_T315_TIME
OUT_OPT_SW
ITCH,
CS_HHO_ASY
NC_CTRL_SW
ITCH,
PS_HHO_ASY
NC_CTRL_SW
ITCH,
IUR_HHO_AS
YNC_CTRL_S
WITCH,
F2P_DATATR
ANS_OPTIMIZ
E_SWITCH,
IRATHO_HOC
ANCEL_RL_R
EEST_SWITC
H,
TRB_RESET_
RL_REEST_S
108
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
WITCH,
RB_REL_RL_
REEST_SWIT
CH,
RB_SETUP_E
NHANCE_RL_
REEST_SWIT
CH,
RAB_SETUPM
OD_CNT_FIX_
SWITCH,
PCH_UE_RLC
_UNRECOVER
ABLEERROR_
SWITCH,
FAST_RETUR
N_LTE_BY_C
ELL_SELECT_
SWITCH,
UL_DUAL_M
ODE_UE_D2P
_OR_D2I_SWI
TCH,
PHYCHRECFG
_ENH_RL_RE
EST_SWITCH,
RBRECFG_EN
H_RL_REEST_
SWITCH,
SMC_STOP_R
LC_SWITCH,
GTP_SN_IN_R
AB_REL_INIT
_BY_UTRAN_
SWITCH,
CMP_IU_QOS
_GTP_PDU_S
N_SWITCH,
DL_TRB_RES
ET_BUFF_SWI
TCH,
RRC_CELLFA
CH_DL_TRB_
RESET_TO_F2
D_SWITCH,
RAB_ASS_MO
D_TNL_ADDR
109
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
_SUP_SWITC
H
Default
Value:PS_F2D_
OVERLAP_CE
LLUPT_SWIT
CH:
0,AMR_HHO_
FAIL_ROLLB
ACK_SWITCH
:
0,PHY_RECFG
_REEST_SWIT
CH:
0,IUR_RL_RE
EST_SWITCH:
0,RB_SETUP_
RL_REEST_S
WITCH:
0,RRC_CONN_
SETUP_OPT_S
WITCH:
0,TCP_ACK_A
CCELERATOR
_SWITCH:
0,RRC_CELLF
ACH_TRB_RE
SET_TO_F2D_
SWITCH:
0,SEND_MSG_
NULL_SWITC
H:
0,FD_PCH_IU
R_CS_OPT_S
WITCH:
0,CELLUPT_T
314_T315_TIM
EOUT_OPT_S
WITCH:
0,CS_HHO_AS
YNC_CTRL_S
WITCH:
0,PS_HHO_AS
YNC_CTRL_S
WITCH:
0,IUR_HHO_A
SYNC_CTRL_
110
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
SWITCH:
0,F2P_DATAT
RANS_OPTIMI
ZE_SWITCH:
0,IRATHO_HO
CANCEL_RL_
REEST_SWIT
CH:
0,TRB_RESET
_RL_REEST_S
WITCH:
0,RB_REL_RL
_REEST_SWIT
CH:
0,RB_SETUP_
ENHANCE_RL
_REEST_SWIT
CH:
0,RAB_SETUP
MOD_CNT_FI
X_SWITCH:
0,PCH_UE_RL
C_UNRECOVE
RABLEERROR
_SWITCH:
0,FAST_RETU
RN_LTE_BY_
CELL_SELEC
T_SWITCH:
0,UL_DUAL_
MODE_UE_D2
P_OR_D2I_SW
ITCH:
0,PHYCHREC
FG_ENH_RL_
REEST_SWIT
CH:
0,RBRECFG_E
NH_RL_REES
T_SWITCH:
0,SMC_STOP_
RLC_SWITCH:
1,GTP_SN_IN_
RAB_REL_INI
T_BY_UTRAN
_SWITCH:
1,CMP_IU_QO
S_GTP_PDU_S
111
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
N_SWITCH:
0,DL_TRB_RE
SET_BUFF_S
WITCH:
0,RRC_CELLF
ACH_DL_TRB
_RESET_TO_F
2D_SWITCH:
0,RAB_ASS_M
OD_TNL_ADD
R_SUP_SWITC
H:1
112
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
CellUpdtCause
BSC6900
SET
UCELLUPDTC
TRLSWITCH
None
None
Meaning:This
parameter is
used to set the
causes of cell
updates. The
cause of a cell
update is carried
in the cell update
message
reported by the
UE.
GUI Value
Range:CELLRE
SELECTION
(CELL
RESELECTIO
N),
PERIODICALC
ELLUPDATE
(PERIODICAL
CELL
UPDATE),
UPLINKDATA
TRANSMISSI
ON(UPLINK
DATA
TRANSMISSI
ON),
PAGINGRESP
ONSE
(PAGING
RESPONSE),
RE_ENTERED
SERVICEARE
A
(RE_ENTERE
D SERVICE
AREA),
RADIOLINKF
AILURE
(RADIO LINK
FAILURE),
RLCUNRECO
VERABLEERR
OR(RLC
UNRECOVER
ABLE
113
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
ERROR),
OTHER
(OTHER)
Unit:None
Actual Value
Range:CELLRE
SELECTION,
PERIODICALC
ELLUPDATE,
UPLINKDATA
TRANSMISSI
ON,
PAGINGRESP
ONSE,
RE_ENTERED
SERVICEARE
A,
RADIOLINKF
AILURE,
RLCUNRECO
VERABLEERR
OR, OTHER
Default
Value:None
114
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
CellUpdtCause
BSC6910
SET
UCELLUPDTC
TRLSWITCH
None
None
Meaning:This
parameter is
used to set the
causes of cell
updates. The
cause of a cell
update is carried
in the cell update
message
reported by the
UE.
GUI Value
Range:CELLRE
SELECTION
(CELL
RESELECTIO
N),
PERIODICALC
ELLUPDATE
(PERIODICAL
CELL
UPDATE),
UPLINKDATA
TRANSMISSI
ON(UPLINK
DATA
TRANSMISSI
ON),
PAGINGRESP
ONSE
(PAGING
RESPONSE),
RE_ENTERED
SERVICEARE
A
(RE_ENTERE
D SERVICE
AREA),
RADIOLINKF
AILURE
(RADIO LINK
FAILURE),
RLCUNRECO
VERABLEERR
OR(RLC
UNRECOVER
ABLE
115
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
ERROR),
OTHER
(OTHER)
Unit:None
Actual Value
Range:CELLRE
SELECTION,
PERIODICALC
ELLUPDATE,
UPLINKDATA
TRANSMISSI
ON,
PAGINGRESP
ONSE,
RE_ENTERED
SERVICEARE
A,
RADIOLINKF
AILURE,
RLCUNRECO
VERABLEERR
OR, OTHER
Default
Value:None
116
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
FachPowerCellUpdtEcNoThd
BSC6900
SET
UCELLUPDTC
TRLSWITCH
None
None
Meaning:Ec/No
threshold, which
is used to
determine
whether to
append the
transmit power
on the FACH
during the
retransmission
of the CELL
UPDATE
CONFIRM
message. When
the RNC
retransmits a
CELL UPDATE
CONFIRM
message to a
UE, the transmit
power on the
FACH is
appended during
the message
retransmission if
the downlink
coverage Ec/No
carried in the
CELL UPDATE
message on the
RACH is lower
than this
threshold. If the
downlink
coverage Ec/No
is greater than or
equal to this
threshold, the
transmit power
on the FACH is
not appended
during the
message
retransmission.
When this
threshold is set
to -24, the
FACH transmit
117
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
power
appending
function is
disabled during
CELL UPDATE
CONFIRM
message
retransmission.
The default
value for this
threshold is -24.
When this
parameter is set
to a large value,
signals in weak
coverage areas
are considered
as strong.
GUI Value
Range:-24~0
Unit:dB
Actual Value
Range:-24~0
Default
Value:-24
118
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
FachPowerCellUpdtEcNoThd
BSC6910
SET
UCELLUPDTC
TRLSWITCH
None
None
Meaning:Ec/No
threshold, which
is used to
determine
whether to
append the
transmit power
on the FACH
during the
retransmission
of the CELL
UPDATE
CONFIRM
message. When
the RNC
retransmits a
CELL UPDATE
CONFIRM
message to a
UE, the transmit
power on the
FACH is
appended during
the message
retransmission if
the downlink
coverage Ec/No
carried in the
CELL UPDATE
message on the
RACH is lower
than this
threshold. If the
downlink
coverage Ec/No
is greater than or
equal to this
threshold, the
transmit power
on the FACH is
not appended
during the
message
retransmission.
When this
threshold is set
to -24, the
FACH transmit
119
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
power
appending
function is
disabled during
CELL UPDATE
CONFIRM
message
retransmission.
The default
value for this
threshold is -24.
When this
parameter is set
to a large value,
signals in weak
coverage areas
are considered
as strong.
GUI Value
Range:-24~0
Unit:dB
Actual Value
Range:-24~0
Default
Value:-24
120
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
OptimizationSwitch3
BSC6900
SET
URRCTRLSWI
TCH
WRFD-010901
Meaning:1)
SYS_RELOC_
OUT_SUCC_S
TAT_OPT_SW
ITCH Whether
the RNC
measures one
successful
handover or
relocation when
receiving an Iu
release
command
message with
the cause value
"Network
Optimization"
from the CN
during an
outgoing
relocation or
outgoing interRAT handover
procedure. 1:
This switch is
turned on. The
RNC measures
one successful
handover or
relocation. 0:
This switch is
turned off. The
RNC measures
one failed
handover or
relocation. 2)
RL_REEST_PS
_ON_FACH_S
WITCH
Whether PS
services are
established on
the FACH upon
call
reestablishment.
1: This switch is
turned on. PS
services are
WRFD-010610
06
WRFD-020203
WRFD-010902
WRFD-010101
WRFD-010510
WRFD-020202
WRFD-010801
WRFD-010802
HSDPA
Mobility
Management
Inter RNC Soft
Handover
Inter RNC URA
Update
3GPP R9
Specifications
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Intra RNC Soft
Handover
Intra RNC Cell
Update
Inter RNC Cell
Update
121
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
established on
the FACH upon
a call
reestablishment
triggered by
either of the
following
factors: - All
downlink radio
links for a UE
are out of
synchronization
. - The SRB over
the Uu interface
is reset. 0: This
switch is turned
off. PS services
are established
on the DCH
upon a call
reestablishment
triggered by
either of the
preceding
factors. 3)
CELLUPDATE
_MEASUREM
ENT_OPT_SW
ITCH Whether
the RNC
repeatedly
calculates the
number of cell
update attempts.
A UE sends a
CELL UPDATE
message in cell 1
and then sends
another in cell 2
before receiving
a CELL
UPDATE
CONFIRM
message from
the RNC or
responding to
the CELL
UPDATE
122
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CONFIRM
message. The
UE completes
the cell update
procedure in cell
2. In the
preceding
scenario, 1: This
switch is turned
on. The RNC
measures one
cell update
attempt only. 0:
This switch is
turned off. The
RNC repeatedly
measures cell
update attempts.
4)
D2F_PROCED
URE_OPTIMIZ
ATION_SWIT
CH Whether the
optimized D2F
procedure takes
effect. 1: This
switch is turned
on. An expired
D2F procedure
is considered as
successful if
either of the
following
conditions is
met: - The RB
reconfiguration
message is sent
in
unacknowledge
d mode (UM),
and all the RLs
in the active set
receive an RL
Fail indication. The RB
reconfiguration
message is sent
in the
123
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
acknowledged
mode (AM), and
an ACK
response is
received from
the UE. If
neither of the
preceding
conditions is
met, the D2F
procedure is
considered as
expired. 0: This
switch is turned
off. The
optimized D2F
procedure does
not take effect.
This switch is set
to 0 by default.
5)
F2D_PROCED
URE_OPTIMIZ
ATION_SWIT
CH Whether the
optimized F2D
procedure takes
effect. 1: This
switch is turned
on. An expired
F2D procedure
is considered as
successful if the
RL status is
normal. If the
RL status is not
normal, the F2D
procedure is
considered as
expired. 0: This
switch is turned
off. The
optimized F2D
procedure does
not take effect.
This switch is set
to 0 by default.
6)
124
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
FOREVER_PC
H_CTRL_PLA
NE_SHARE_O
PT 1: This
switch is turned
on. Load sharing
of UEs in the
CELL_PCH
state is not
triggered among
SPU subsystems
and the UEs in
the CELL_PCH
state are
periodically
released on this
SPU subsystem
if the following
conditions are
met: - The CPU
usage of the SPU
subsystem
exceeds a
specified
threshold and
exceeds the
average CPU
usage of the SPU
subsystems
under the RNC. The number of
online UEs in
the CELL_PCH
state on this SPU
subsystem
exceeds the
average number
of UEs in the
CELL_PCH
state on the SPU
subsystems
under the RNC.
0: This switch is
turned off. Load
sharing of UEs
in the
CELL_PCH
state is triggered
125
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
among SPU
subsystems if
the following
conditions are
met: - The CPU
usage of the SPU
subsystem
exceeds a
specified
threshold and
exceeds the
average CPU
usage of the SPU
subsystems
under the RNC. The number of
online UEs in
the CELL_PCH
state on this SPU
subsystem
exceeds the
average number
of UEs in the
CELL_PCH
state on the SPU
subsystems
under the RNC.
7)
FOREVER_PC
H_USER_PLA
NE_SHARE_O
PT 1: This
switch is turned
on. The RNC
selects another
DSP to perform
load sharing on
the user plane
when always
online users are
activated. 0:
This switch is
turned off. The
RNC does not
perform load
sharing on the
user plane when
always online
126
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
users are
activated. 8)
RAB_REL_SR
V_CELL_CHG
_CROSS_SWIT
CH Whether the
serving cell
change
procedure is
allowed during
the release of all
PS RABs. 1:
This switch is
turned on. The
serving cell
change
procedure is not
allowed during
the release of all
PS RABs. 0:
This switch is
turned off. The
serving cell
change
procedure is
allowed during
the release of all
PS RABs. 9)
SCRIWITHCA
USE_OVERLA
P_SWITCH
How the RNC
will react if it
receives an
SCRI message
with the cause
value "UE
Requested PS
Data session
end" in the
middle of
another
procedure. 1:
This switch is
turned on. The
RNC maintains
the original
RRC state and
127
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
does not release
the connection
of the related UE
if the RNC
receives an
SCRI message
with the
preceding cause
value in the
middle of
another
procedure. 0:
This switch is
turned off. The
RNC releases
the connection
of the UE if both
of the following
conditions are
met: The RNC
receives an
SCRI message
with the
preceding cause
value in the
middle of
another
procedure. The
TAC of the UE
does not belong
to the TACs that
are enabled with
fast dormancy.
10)
P2F_CUC_REP
EAT_SWITCH
Whether the
RNC
retransmits a
CELL UPDATE
CONFIRM
message to a UE
that is
transitioning
from the
CELL_PCH or
URA_PCH state
to the
128
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CELL_FACH
state. 1: This
switch is turned
on. The RNC
retransmits a
CELL UPDATE
CONFIRM
message to a UE
that is
transitioning
from the
CELL_PCH or
URA_PCH state
to the
CELL_FACH
state. 0: This
switch is turned
off. The RNC
does not
retransmit a
CELL UPDATE
CONFIRM
message to a UE
that is
transitioning
from the
CELL_PCH or
URA_PCH state
to the
CELL_FACH
state. 11)
UU_ABN_REL
_INFO_NOTIF
Y_NODEB_S
WITCH
Whether to
notify the
NodeB of the
abnormal RL
release due to
poor Uu
interface
quality. 1: This
switch is turned
on. The RNC
notifies the
NodeB of the
abnormal RL
129
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
release due to
poor Uu
interface
quality. 0: This
switch is turned
off. The RNC
does not notify
the NodeB of the
abnormal RL
release due to
poor Uu
interface
quality. 12)
D2F_AM_PRO
CEDURE_OPT
IMIZATION_S
WITCH
Whether the
RNC considers
the D2F state
transition as
successful if the
RNC does not
receive a
response
message from
the UE within
the specified
period after
sending a
RADIO
BEARER
RECONFIGUR
TION message
to the UE in
acknowledged
mode (AM). 1:
This switch is
turned on. The
RNC considers
the D2F state
transition as
successful if the
following
conditions are
met: The RNC
does not receive
a response from
130
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
the UE within
the specified
period after
sending a
RADIO
BEARER
RECONFIGUR
ATION
message to the
UE in AM. All
radio links
(RLs) for the UE
are out of
synchronization
. The RLCs for
all TRBs are in
AM. If any of
the preceding
conditions is not
met, the RNC
undoes the D2F
state transition.
0: This switch is
turned off. The
RNC undoes the
D2F state
transition if the
RNC does not
receive a
response from
the UE within
the specified
period after
sending a
RADIO
BEARER
RECONFIGUR
ATION
message to the
UE in AM. 13)
AM_D2F_F2D
_RESTMR_OP
TIMIZATION_
SWITCH
(Response
Timer
Optimization
Switch for D2F
131
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
and F2D
Procedures in
AM) Length
policy for the
timer set for the
RNC to wait for
a response
message from
the UE after the
RNC sends a
RADIO
BEARER
RECONFIGUR
ATION
message to the
UE in AM
during the D2F
and F2D state
transitions. 1:
This switch is
turned on. The
length of the
timer equals its
configured
value (value of
the
"RbRecfgRspT
mr" parameter in
the "SET
USTATETIME
R" command)
plus four
seconds. 0: This
switch is turned
off. The length
of this timer
equals its
configured
value. 14)
D2P_DT_MSG
_BUFFER_SWI
TCH (DT
Message Buffer
Switch During
D2P) Whether
the RNC buffers
the DIRECT
TRANSFER
132
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
message sent by
the CN during
the D2P state
transition. 1:
This switch is
turned on. The
RNC buffers the
DIRECT
TRANSFER
message. The
RNC sends a
paging message
to the UE after
the D2P state
transition is
complete and
then sends the
buffered
DIRECT
TRANSFER
message to the
UE. 0: This
switch is turned
off. The RNC
forwards the
DIRECT
TRANSFER
message to the
UE immediately
after receiving
it. 15)
CM_CODE_C
ONFLICT_OPT
_SWITCH Used
to solve code
resource
conflicts in
compressed
mode. 1: This
switch is turned
on. Code
resource
conflicts in
compressed
mode are solved.
0: This switch is
turned off. Code
resource
133
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
conflicts in
compressed
mode are not
solved. 16)
H_SERV_CEL
L_CHANGE_
MSG_OPT_SW
ITCH(Enable H
Serving Cell
Change MSG
Size Reduction)
Whether to
reduce the size
of the HSDPA
serving cell
change message.
1: This switch is
turned on. The
size of the
HSDPA serving
cell change
message is
reduced. 0: This
switch is turned
off. The size of
the HSDPA
serving cell
change message
is not reduced.
17)
FAST_HSDPA
_SERV_CELL_
CHANGE_SWI
TCH (Fast
HSDPA Serving
Cell Change
Optimization
Switch)
Whether to
enable the fast
HSDPA serving
cell change
optimization
function. 1: This
switch is turned
on. The RNC
includes the IE
Delay restriction
134
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
flag in the
PHYSICAL
CHANNEL
RECONFIGUR
ATION
message. For
details about the
IE Delay
restriction flag,
see section
10.2.22 in 3GPP
TS25.331. 0:
This switch is
turned off. The
RNC does not
include the IE
Delay restriction
flag in the
PHYSICAL
CHANNEL
RECONFIGUR
ATION
message. 18)
RLRST_ASU_
SUCC_COUNT
ERS_CORREC
T_SWITCH
(SHO Counting
Correction
Switch in RL
Reestablish)
When the RL
reestablishment
function is
enabled, a soft
handover
procedure is
considered as
successful even
if the ASU CMP
message is not
received if RL
reestablishment
is triggered
during the soft
handover. This
parameter
specifies
135
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
whether to
correct the
counting of
successful soft
handovers when
RL
reestablishment
is triggered
during the soft
handover. 1:
This switch is
turned on. Such
a soft handover
procedure is
considered as
failed. 0: This
switch is turned
off. Such a soft
handover
procedure is
considered as
successful. 19)
COUNT_STAT
E_CHG_BY_R
AB_EHN_SWI
TCH Whether to
enable certain
state transitionrelated counters
to be
incremented on
a PS RAB basis.
These counters
include the
VS.DCCC.P2D.
Att,
VS.DCCC.P2D.
Succ,
VS.DCCC.Att.
D2U, and
VS.DCCC.Succ
.D2U counters.
1: This switch is
turned on. These
counters are
incremented on
a PS RAB basis.
0: This switch is
136
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
turned off.
These counters
are incremented
on a UE basis.
20)
RAB_RELATE
D_COUNTER_
OPT_SWITCH
(RAB Setup
Failure
Statistical
Optimization
Switch)
Whether to
optimize the
statistics of
counters
measuring RAB
setup failures
and abnormal
RAB releases. 1:
This switch is
turned on. Under
this
circumstance,
the statistics of
counters
measuring RAB
setup failures
and abnormal
RAB releases
are optimized. 0:
This switch is
turned off.
Under this
circumstance,
the statistics of
counters
measuring RAB
setup failures
and abnormal
RAB releases
are not
optimized. 21)
CELLUPDATE
_PROCEDURE
_OPT_SWITC
H (Cell Update
137
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Procedure
Optimization
Switch)
Whether to
enable the
optimized
processing for
the cell update
procedure. 1:
This switch is set
to on. The RNC
supports the
overlapping of
these two
procedures: cell
update
procedure
caused by RL
failure and P2D/
D2P/D2F state
transition
procedure. For
UEs in the
CELL_DCH
state, the RNC
performs a cell
update
procedure based
on the
retransmitted
CELL UPDATE
message if the
retransmitted
message carries
an SRB or TRB
reset indication.
For UEs in the
CELL_PCH or
URA_PCH
state, when the
number of
CELL UPDATE
messages with
the cause value
paging response
or UL data
transmission
exceeds the
138
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
value specified
by N381, the
RNC sends an
RRC connection
release message
to the UE in the
cell where the
UE sends the last
CELL UPDATE
message. For
UEs in states
other than
CELL_DCH or
in the middle of
state transitions
other than P2D,
if the SRNC
receives a CELL
UPDATE
message with
HRNTI from a
UE through the
DRNC while
waiting for the
UE's response to
the CELL
UPDATE
CONFIRM
message, the
SRNC considers
the message as a
retransmitted
one. 0. This
switch is set to
off. The
optimized
processing for
the cell update
procedure is not
supported. 22)
PTT_PAGING_
PRD_CRRCT_
SWITCH
(Correct the
Paging
Retransmission
for PTT
Services over
139
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Uu) Whether to
correct the
retransmission
period of paging
messages for
push to talk
(PTT) services
over the Uu
interface. 1: This
switch is set to
on, the
retransmission
period of PTT
services is
corrected. That
is, if the RNC
does not receive
a paging
response within
320 ms after
sending a paging
message, the
RNC
retransmits the
paging message.
0: This switch is
set to off, the
retransmission
period of PTT
services is not
corrected. That
is, the RNC
retransmits a
paging message
only when it
does not receive
a paging
response within
640 ms after
sending a paging
message. 23)
RRC_REL_ST
ATUS_RSP_R
AB_ASS_REQ
_SWITCH
(Respond to
RAB
Assignment
140
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Request upon
RRC Release)
Whether the
RNC processes
the RAB
ASSIGNMENT
REQUEST
message and
returns a RAB
ASSIGNMENT
RESPONSE
message to the
CN in the
following
scenario: After
receiving a RAB
RELEASE
REQUEST
message from
the RNC to
release the last
RAB of a UE,
the CN does not
return an IU
RELEASE
COMMAND
message but
returns a RAB
ASSIGNMENT
REQUEST
instead. 1: This
switch is set to
on. The RNC
processes the
RAB
ASSIGNMENT
REQUEST
message and
returns a RAB
ASSIGNMENT
RESPONSE
message to the
CN in the
preceding
scenario. 0: This
switch is set to
off. The RNC
does not process
141
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
the RAB
ASSIGNMENT
REQUEST
message in the
preceding
scenario. 24)
L2U_UP_DEL
AY_OPT_SWI
TCH (L2U UP
Delay
Optimization
Switch)
Whether the
RNC returns a
RELOCATION
COMPLETE
message to the
CN to start UP
data
transmission
immediately
after receiving a
HANDOVER
TO UTRAN
COMPLETE
message during
a LTE-toUMTS
handover. 1:
This switch is set
to on. The RNC
immediately
returns a
RELOCATION
COMPLETE
message to the
CN in the
preceding
scenario. 0: This
switch is set to
off. After the
RNC queries the
UE's capability
and the security
mode procedure
is complete, the
RNC returns a
RELOCATION
142
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
COMPLETE
message to the
CN. 25)
PRI_LDR_SYS
HO_OUT_USE
_SELECT_OPT
_SWITCH
(Optimize UE
Selection for
Outgoing InterRAT Handover
in Basic
Congestion)
Whether the
LDR algorithm
on the RNC side
updates the
attribute of
outgoing interRAT handover
for a UE after an
F2D, P2D, or
D2D state
transition
procedure. 1:
This switch is set
to on. The LDR
algorithm on the
RNC side
updates the
attribute of
outgoing interRAT handover
for a UE after an
F2D, P2D, or
D2D state
transition
procedure. In
this way, the
LDR algorithm
on the RNC side
can select
appropriate UEs
for outgoing
inter-RAT
handovers when
the cell is in
basic congestion
143
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
state. 0: This
switch is set to
off. The LDR
algorithm on the
RNC side does
not update the
attribute of
outgoing interRAT handover
for a UE after an
F2D, P2D, or
D2D state
transition
procedure.
GUI Value
Range:SYS_RE
LOC_OUT_SU
CC_STAT_OP
T_SWITCH
(SYS_RELOC_
OUT_SUCC_S
TAT_OPT_SW
ITCH),
RL_REEST_PS
_ON_FACH_S
WITCH
(RL_REEST_P
S_ON_FACH_
SWITCH),
CELLUPDATE
_MEASUREM
ENT_OPT_SW
ITCH
(CELLUPDAT
E_MEASURE
MENT_OPT_S
WITCH),
D2F_PROCED
URE_OPTIMIZ
ATION_SWIT
CH
(D2F_PROCED
URE_OPTIMIZ
ATION_SWIT
CH),
F2D_PROCED
URE_OPTIMIZ
144
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
ATION_SWIT
CH
(F2D_PROCED
URE_OPTIMIZ
ATION_SWIT
CH),
FOREVER_PC
H_CTRL_PLA
NE_SHARE_O
PT
(FOREVER_PC
H_CTRL_PLA
NE_SHARE_O
PT),
FOREVER_PC
H_USER_PLA
NE_SHARE_O
PT
(FOREVER_PC
H_USER_PLA
NE_SHARE_O
PT),
RAB_REL_SR
V_CELL_CHG
_CROSS_SWIT
CH
(RAB_REL_SR
V_CELL_CHG
_CROSS_SWIT
CH),
SCRIWITHCA
USE_OVERLA
P_SWITCH
(SCRIWITHCA
USE_OVERLA
P_SWITCH),
P2F_CUC_REP
EAT_SWITCH
(P2F_CUC_RE
PEAT_SWITC
H),
UU_ABN_REL
_INFO_NOTIF
Y_NODEB_S
WITCH
(UU_ABN_RE
L_INFO_NOTI
FY_NODEB_S
145
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
WITCH),
D2F_AM_PRO
CEDURE_OPT
IMIZATION_S
WITCH
(D2F_AM_PR
OCEDURE_OP
TIMIZATION_
SWITCH),
AM_D2F_F2D
_RESTMR_OP
TIMIZATION_
SWITCH
(AM_D2F_F2D
_RESTMR_OP
TIMIZATION_
SWITCH),
D2P_DT_MSG
_BUFFER_SWI
TCH
(D2P_DT_MSG
_BUFFER_SWI
TCH),
CM_CODE_C
ONFLICT_OPT
_SWITCH
(CM_CODE_C
ONFLICT_OPT
_SWITCH),
H_SERV_CEL
L_CHANGE_
MSG_OPT_SW
ITCH
(H_SERV_CEL
L_CHANGE_
MSG_OPT_SW
ITCH),
FAST_HSDPA
_SERV_CELL_
CHANGE_SWI
TCH
(FAST_HSDPA
_SERV_CELL_
CHANGE_SWI
TCH),
RLRST_ASU_
SUCC_COUNT
ERS_CORREC
146
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
T_SWITCH
(RLRST_ASU_
SUCC_COUNT
ERS_CORREC
T_SWITCH),
COUNT_STAT
E_CHG_BY_R
AB_EHN_SWI
TCH
(COUNT_STA
TE_CHG_BY_
RAB_EHN_SW
ITCH),
RAB_RELATE
D_COUNTER_
OPT_SWITCH
(RAB_RELAT
ED_COUNTER
_OPT_SWITC
H),
CELLUPDATE
_PROCEDURE
_OPT_SWITC
H
(CELLUPDAT
E_PROCEDUR
E_OPT_SWITC
H),
PTT_PAGING_
PRD_CRRCT_
SWITCH
(PTT_PAGING
_PRD_CRRCT
_SWITCH),
RRC_REL_ST
ATUS_RSP_R
AB_ASS_REQ
_SWITCH
(RRC_REL_ST
ATUS_RSP_R
AB_ASS_REQ
_SWITCH),
L2U_UP_DEL
AY_OPT_SWI
TCH
(L2U_UP_DEL
AY_OPT_SWI
TCH),
147
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
PRI_LDR_SYS
HO_OUT_USE
_SELECT_OPT
_SWITCH
(PRI_LDR_SY
SHO_OUT_US
E_SELECT_OP
T_SWITCH)
Unit:None
Actual Value
Range:SYS_RE
LOC_OUT_SU
CC_STAT_OP
T_SWITCH,
RL_REEST_PS
_ON_FACH_S
WITCH,
CELLUPDATE
_MEASUREM
ENT_OPT_SW
ITCH,
D2F_PROCED
URE_OPTIMIZ
ATION_SWIT
CH,
F2D_PROCED
URE_OPTIMIZ
ATION_SWIT
CH,
FOREVER_PC
H_CTRL_PLA
NE_SHARE_O
PT,
FOREVER_PC
H_USER_PLA
NE_SHARE_O
PT,
RAB_REL_SR
V_CELL_CHG
_CROSS_SWIT
CH,
SCRIWITHCA
USE_OVERLA
P_SWITCH,
P2F_CUC_REP
EAT_SWITCH,
UU_ABN_REL
148
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
_INFO_NOTIF
Y_NODEB_S
WITCH,
D2F_AM_PRO
CEDURE_OPT
IMIZATION_S
WITCH,
AM_D2F_F2D
_RESTMR_OP
TIMIZATION_
SWITCH,
D2P_DT_MSG
_BUFFER_SWI
TCH,
CM_CODE_C
ONFLICT_OPT
_SWITCH,
H_SERV_CEL
L_CHANGE_
MSG_OPT_SW
ITCH,
FAST_HSDPA
_SERV_CELL_
CHANGE_SWI
TCH,
RLRST_ASU_
SUCC_COUNT
ERS_CORREC
T_SWITCH,
COUNT_STAT
E_CHG_BY_R
AB_EHN_SWI
TCH,
RAB_RELATE
D_COUNTER_
OPT_SWITCH,
CELLUPDATE
_PROCEDURE
_OPT_SWITC
H,
PTT_PAGING_
PRD_CRRCT_
SWITCH,
RRC_REL_ST
ATUS_RSP_R
AB_ASS_REQ
_SWITCH,
L2U_UP_DEL
149
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
AY_OPT_SWI
TCH,
PRI_LDR_SYS
HO_OUT_USE
_SELECT_OPT
_SWITCH
Default
Value:SYS_RE
LOC_OUT_SU
CC_STAT_OP
T_SWITCH:
1,RL_REEST_
PS_ON_FACH
_SWITCH:
0,CELLUPDAT
E_MEASURE
MENT_OPT_S
WITCH:
0,D2F_PROCE
DURE_OPTIM
IZATION_SWI
TCH:
0,F2D_PROCE
DURE_OPTIM
IZATION_SWI
TCH:
0,FOREVER_P
CH_CTRL_PL
ANE_SHARE_
OPT:
0,FOREVER_P
CH_USER_PL
ANE_SHARE_
OPT:
0,RAB_REL_S
RV_CELL_CH
G_CROSS_SW
ITCH:
0,SCRIWITHC
AUSE_OVERL
AP_SWITCH:
0,P2F_CUC_R
EPEAT_SWIT
CH:
0,UU_ABN_RE
L_INFO_NOTI
FY_NODEB_S
150
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
WITCH:
0,D2F_AM_PR
OCEDURE_OP
TIMIZATION_
SWITCH:
0,AM_D2F_F2
D_RESTMR_O
PTIMIZATION
_SWITCH:
0,D2P_DT_MS
G_BUFFER_S
WITCH:
0,CM_CODE_
CONFLICT_O
PT_SWITCH:
1,H_SERV_CE
LL_CHANGE_
MSG_OPT_SW
ITCH:
0,FAST_HSDP
A_SERV_CEL
L_CHANGE_S
WITCH:
0,RLRST_ASU
_SUCC_COUN
TERS_CORRE
CT_SWITCH:
0,COUNT_STA
TE_CHG_BY_
RAB_EHN_SW
ITCH:
0,RAB_RELAT
ED_COUNTER
_OPT_SWITC
H:
0,CELLUPDAT
E_PROCEDUR
E_OPT_SWITC
H:
1,PTT_PAGIN
G_PRD_CRRC
T_SWITCH:
0,RRC_REL_S
TATUS_RSP_
RAB_ASS_RE
Q_SWITCH:
0,L2U_UP_DE
LAY_OPT_SW
151
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
ITCH:
1,PRI_LDR_SY
SHO_OUT_US
E_SELECT_OP
T_SWITCH:0
152
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
OptimizationSwitch3
BSC6910
SET
URRCTRLSWI
TCH
WRFD-010901
Meaning:1)
SYS_RELOC_
OUT_SUCC_S
TAT_OPT_SW
ITCH Whether
the RNC
measures one
successful
handover or
relocation when
receiving an Iu
release
command
message with
the cause value
"Network
Optimization"
from the CN
during an
outgoing
relocation or
outgoing interRAT handover
procedure. 1:
This switch is
turned on. The
RNC measures
one successful
handover or
relocation. 0:
This switch is
turned off. The
RNC measures
one failed
handover or
relocation. 2)
RL_REEST_PS
_ON_FACH_S
WITCH
Whether PS
services are
established on
the FACH upon
call
reestablishment.
1: This switch is
turned on. PS
services are
WRFD-010610
06
WRFD-020203
WRFD-010902
WRFD-010101
WRFD-010510
WRFD-020202
WRFD-010801
WRFD-010802
HSDPA
Mobility
Management
Inter RNC Soft
Handover
Inter RNC URA
Update
3GPP R9
Specifications
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Intra RNC Soft
Handover
Intra RNC Cell
Update
Inter RNC Cell
Update
153
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
established on
the FACH upon
a call
reestablishment
triggered by
either of the
following
factors: - All
downlink radio
links for a UE
are out of
synchronization
. - The SRB over
the Uu interface
is reset. 0: This
switch is turned
off. PS services
are established
on the DCH
upon a call
reestablishment
triggered by
either of the
preceding
factors. 3)
CELLUPDATE
_MEASUREM
ENT_OPT_SW
ITCH Whether
the RNC
repeatedly
calculates the
number of cell
update attempts.
A UE sends a
CELL UPDATE
message in cell 1
and then sends
another in cell 2
before receiving
a CELL
UPDATE
CONFIRM
message from
the RNC or
responding to
the CELL
UPDATE
154
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CONFIRM
message. The
UE completes
the cell update
procedure in cell
2. In the
preceding
scenario, 1: This
switch is turned
on. The RNC
measures one
cell update
attempt only. 0:
This switch is
turned off. The
RNC repeatedly
measures cell
update attempts.
4)
D2F_PROCED
URE_OPTIMIZ
ATION_SWIT
CH Whether the
optimized D2F
procedure takes
effect. 1: This
switch is turned
on. An expired
D2F procedure
is considered as
successful if
either of the
following
conditions is
met: - The RB
reconfiguration
message is sent
in
unacknowledge
d mode (UM),
and all the RLs
in the active set
receive an RL
Fail indication. The RB
reconfiguration
message is sent
in the
155
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
acknowledged
mode (AM), and
an ACK
response is
received from
the UE. If
neither of the
preceding
conditions is
met, the D2F
procedure is
considered as
expired. 0: This
switch is turned
off. The
optimized D2F
procedure does
not take effect.
This switch is set
to 0 by default.
5)
F2D_PROCED
URE_OPTIMIZ
ATION_SWIT
CH Whether the
optimized F2D
procedure takes
effect. 1: This
switch is turned
on. An expired
F2D procedure
is considered as
successful if the
RL status is
normal. If the
RL status is not
normal, the F2D
procedure is
considered as
expired. 0: This
switch is turned
off. The
optimized F2D
procedure does
not take effect.
This switch is set
to 0 by default.
6)
156
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
FOREVER_PC
H_CTRL_PLA
NE_SHARE_O
PT 1: This
switch is turned
on. Load sharing
of UEs in the
CELL_PCH
state is not
triggered among
SPU subsystems
and the UEs in
the CELL_PCH
state are
periodically
released on this
SPU subsystem
if the following
conditions are
met: - The CPU
usage of the SPU
subsystem
exceeds a
specified
threshold and
exceeds the
average CPU
usage of the SPU
subsystems
under the RNC. The number of
online UEs in
the CELL_PCH
state on this SPU
subsystem
exceeds the
average number
of UEs in the
CELL_PCH
state on the SPU
subsystems
under the RNC.
0: This switch is
turned off. Load
sharing of UEs
in the
CELL_PCH
state is triggered
157
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
among SPU
subsystems if
the following
conditions are
met: - The CPU
usage of the SPU
subsystem
exceeds a
specified
threshold and
exceeds the
average CPU
usage of the SPU
subsystems
under the RNC. The number of
online UEs in
the CELL_PCH
state on this SPU
subsystem
exceeds the
average number
of UEs in the
CELL_PCH
state on the SPU
subsystems
under the RNC.
7)
FOREVER_PC
H_USER_PLA
NE_SHARE_O
PT 1: This
switch is turned
on. The RNC
selects another
DSP to perform
load sharing on
the user plane
when always
online users are
activated. 0:
This switch is
turned off. The
RNC does not
perform load
sharing on the
user plane when
always online
158
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
users are
activated. 8)
RAB_REL_SR
V_CELL_CHG
_CROSS_SWIT
CH Whether the
serving cell
change
procedure is
allowed during
the release of all
PS RABs. 1:
This switch is
turned on. The
serving cell
change
procedure is not
allowed during
the release of all
PS RABs. 0:
This switch is
turned off. The
serving cell
change
procedure is
allowed during
the release of all
PS RABs. 9)
SCRIWITHCA
USE_OVERLA
P_SWITCH
How the RNC
will react if it
receives an
SCRI message
with the cause
value "UE
Requested PS
Data session
end" in the
middle of
another
procedure. 1:
This switch is
turned on. The
RNC maintains
the original
RRC state and
159
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
does not release
the connection
of the related UE
if the RNC
receives an
SCRI message
with the
preceding cause
value in the
middle of
another
procedure. 0:
This switch is
turned off. The
RNC releases
the connection
of the UE if both
of the following
conditions are
met: The RNC
receives an
SCRI message
with the
preceding cause
value in the
middle of
another
procedure. The
TAC of the UE
does not belong
to the TACs that
are enabled with
fast dormancy.
10)
P2F_CUC_REP
EAT_SWITCH
Whether the
RNC
retransmits a
CELL UPDATE
CONFIRM
message to a UE
that is
transitioning
from the
CELL_PCH or
URA_PCH state
to the
160
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CELL_FACH
state. 1: This
switch is turned
on. The RNC
retransmits a
CELL UPDATE
CONFIRM
message to a UE
that is
transitioning
from the
CELL_PCH or
URA_PCH state
to the
CELL_FACH
state. 0: This
switch is turned
off. The RNC
does not
retransmit a
CELL UPDATE
CONFIRM
message to a UE
that is
transitioning
from the
CELL_PCH or
URA_PCH state
to the
CELL_FACH
state. 11)
UU_ABN_REL
_INFO_NOTIF
Y_NODEB_S
WITCH
Whether to
notify the
NodeB of the
abnormal RL
release due to
poor Uu
interface
quality. 1: This
switch is turned
on. The RNC
notifies the
NodeB of the
abnormal RL
161
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
release due to
poor Uu
interface
quality. 0: This
switch is turned
off. The RNC
does not notify
the NodeB of the
abnormal RL
release due to
poor Uu
interface
quality. 12)
D2F_AM_PRO
CEDURE_OPT
IMIZATION_S
WITCH
Whether the
RNC considers
the D2F state
transition as
successful if the
RNC does not
receive a
response
message from
the UE within
the specified
period after
sending a
RADIO
BEARER
RECONFIGUR
TION message
to the UE in
acknowledged
mode (AM). 1:
This switch is
turned on. The
RNC considers
the D2F state
transition as
successful if the
following
conditions are
met: The RNC
does not receive
a response from
162
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
the UE within
the specified
period after
sending a
RADIO
BEARER
RECONFIGUR
ATION
message to the
UE in AM. All
radio links
(RLs) for the UE
are out of
synchronization
. The RLCs for
all TRBs are in
AM. If any of
the preceding
conditions is not
met, the RNC
undoes the D2F
state transition.
0: This switch is
turned off. The
RNC undoes the
D2F state
transition if the
RNC does not
receive a
response from
the UE within
the specified
period after
sending a
RADIO
BEARER
RECONFIGUR
ATION
message to the
UE in AM. 13)
AM_D2F_F2D
_RESTMR_OP
TIMIZATION_
SWITCH
(Response
Timer
Optimization
Switch for D2F
163
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
and F2D
Procedures in
AM) Length
policy for the
timer set for the
RNC to wait for
a response
message from
the UE after the
RNC sends a
RADIO
BEARER
RECONFIGUR
ATION
message to the
UE in AM
during the D2F
and F2D state
transitions. 1:
This switch is
turned on. The
length of the
timer equals its
configured
value (value of
the
"RbRecfgRspT
mr" parameter in
the "SET
USTATETIME
R" command)
plus four
seconds. 0: This
switch is turned
off. The length
of this timer
equals its
configured
value. 14)
D2P_DT_MSG
_BUFFER_SWI
TCH (DT
Message Buffer
Switch During
D2P) Whether
the RNC buffers
the DIRECT
TRANSFER
164
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
message sent by
the CN during
the D2P state
transition. 1:
This switch is
turned on. The
RNC buffers the
DIRECT
TRANSFER
message. The
RNC sends a
paging message
to the UE after
the D2P state
transition is
complete and
then sends the
buffered
DIRECT
TRANSFER
message to the
UE. 0: This
switch is turned
off. The RNC
forwards the
DIRECT
TRANSFER
message to the
UE immediately
after receiving
it. 15)
CM_CODE_C
ONFLICT_OPT
_SWITCH Used
to solve code
resource
conflicts in
compressed
mode. 1: This
switch is turned
on. Code
resource
conflicts in
compressed
mode are solved.
0: This switch is
turned off. Code
resource
165
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
conflicts in
compressed
mode are not
solved. 16)
H_SERV_CEL
L_CHANGE_
MSG_OPT_SW
ITCH(Enable H
Serving Cell
Change MSG
Size Reduction)
Whether to
reduce the size
of the HSDPA
serving cell
change message.
1: This switch is
turned on. The
size of the
HSDPA serving
cell change
message is
reduced. 0: This
switch is turned
off. The size of
the HSDPA
serving cell
change message
is not reduced.
17)
FAST_HSDPA
_SERV_CELL_
CHANGE_SWI
TCH (Fast
HSDPA Serving
Cell Change
Optimization
Switch)
Whether to
enable the fast
HSDPA serving
cell change
optimization
function. 1: This
switch is turned
on. The RNC
includes the IE
Delay restriction
166
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
flag in the
PHYSICAL
CHANNEL
RECONFIGUR
ATION
message. For
details about the
IE Delay
restriction flag,
see section
10.2.22 in 3GPP
TS25.331. 0:
This switch is
turned off. The
RNC does not
include the IE
Delay restriction
flag in the
PHYSICAL
CHANNEL
RECONFIGUR
ATION
message. 18)
RLRST_ASU_
SUCC_COUNT
ERS_CORREC
T_SWITCH
(SHO Counting
Correction
Switch in RL
Reestablish)
When the RL
reestablishment
function is
enabled, a soft
handover
procedure is
considered as
successful even
if the ASU CMP
message is not
received if RL
reestablishment
is triggered
during the soft
handover. This
parameter
specifies
167
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
whether to
correct the
counting of
successful soft
handovers when
RL
reestablishment
is triggered
during the soft
handover. 1:
This switch is
turned on. Such
a soft handover
procedure is
considered as
failed. 0: This
switch is turned
off. Such a soft
handover
procedure is
considered as
successful. 19)
COUNT_STAT
E_CHG_BY_R
AB_EHN_SWI
TCH Whether to
enable certain
state transitionrelated counters
to be
incremented on
a PS RAB basis.
These counters
include the
VS.DCCC.P2D.
Att,
VS.DCCC.P2D.
Succ,
VS.DCCC.Att.
D2U, and
VS.DCCC.Succ
.D2U counters.
1: This switch is
turned on. These
counters are
incremented on
a PS RAB basis.
0: This switch is
168
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
turned off.
These counters
are incremented
on a UE basis.
20)
RAB_RELATE
D_COUNTER_
OPT_SWITCH
(RAB Setup
Failure
Statistical
Optimization
Switch)
Whether to
optimize the
statistics of
counters
measuring RAB
setup failures
and abnormal
RAB releases. 1:
This switch is
turned on. Under
this
circumstance,
the statistics of
counters
measuring RAB
setup failures
and abnormal
RAB releases
are optimized. 0:
This switch is
turned off.
Under this
circumstance,
the statistics of
counters
measuring RAB
setup failures
and abnormal
RAB releases
are not
optimized. 21)
CELLUPDATE
_PROCEDURE
_OPT_SWITC
H (Cell Update
169
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Procedure
Optimization
Switch)
Whether to
enable the
optimized
processing for
the cell update
procedure. 1:
This switch is set
to on. The RNC
supports the
overlapping of
these two
procedures: cell
update
procedure
caused by RL
failure and P2D/
D2P/D2F state
transition
procedure. For
UEs in the
CELL_DCH
state, the RNC
performs a cell
update
procedure based
on the
retransmitted
CELL UPDATE
message if the
retransmitted
message carries
an SRB or TRB
reset indication.
For UEs in the
CELL_PCH or
URA_PCH
state, when the
number of
CELL UPDATE
messages with
the cause value
paging response
or UL data
transmission
exceeds the
170
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
value specified
by N381, the
RNC sends an
RRC connection
release message
to the UE in the
cell where the
UE sends the last
CELL UPDATE
message. For
UEs in states
other than
CELL_DCH or
in the middle of
state transitions
other than P2D,
if the SRNC
receives a CELL
UPDATE
message with
HRNTI from a
UE through the
DRNC while
waiting for the
UE's response to
the CELL
UPDATE
CONFIRM
message, the
SRNC considers
the message as a
retransmitted
one. 0. This
switch is set to
off. The
optimized
processing for
the cell update
procedure is not
supported. 22)
PTT_PAGING_
PRD_CRRCT_
SWITCH
(Correct the
Paging
Retransmission
for PTT
Services over
171
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Uu) Whether to
correct the
retransmission
period of paging
messages for
push to talk
(PTT) services
over the Uu
interface. 1: This
switch is set to
on, the
retransmission
period of PTT
services is
corrected. That
is, if the RNC
does not receive
a paging
response within
320 ms after
sending a paging
message, the
RNC
retransmits the
paging message.
0: This switch is
set to off, the
retransmission
period of PTT
services is not
corrected. That
is, the RNC
retransmits a
paging message
only when it
does not receive
a paging
response within
640 ms after
sending a paging
message. 23)
RRC_REL_ST
ATUS_RSP_R
AB_ASS_REQ
_SWITCH
(Respond to
RAB
Assignment
172
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Request upon
RRC Release)
Whether the
RNC processes
the RAB
ASSIGNMENT
REQUEST
message and
returns a RAB
ASSIGNMENT
RESPONSE
message to the
CN in the
following
scenario: After
receiving a RAB
RELEASE
REQUEST
message from
the RNC to
release the last
RAB of a UE,
the CN does not
return an IU
RELEASE
COMMAND
message but
returns a RAB
ASSIGNMENT
REQUEST
instead. 1: This
switch is set to
on. The RNC
processes the
RAB
ASSIGNMENT
REQUEST
message and
returns a RAB
ASSIGNMENT
RESPONSE
message to the
CN in the
preceding
scenario. 0: This
switch is set to
off. The RNC
does not process
173
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
the RAB
ASSIGNMENT
REQUEST
message in the
preceding
scenario. 24)
L2U_UP_DEL
AY_OPT_SWI
TCH (L2U UP
Delay
Optimization
Switch)
Whether the
RNC returns a
RELOCATION
COMPLETE
message to the
CN to start UP
data
transmission
immediately
after receiving a
HANDOVER
TO UTRAN
COMPLETE
message during
a LTE-toUMTS
handover. 1:
This switch is set
to on. The RNC
immediately
returns a
RELOCATION
COMPLETE
message to the
CN in the
preceding
scenario. 0: This
switch is set to
off. After the
RNC queries the
UE's capability
and the security
mode procedure
is complete, the
RNC returns a
RELOCATION
174
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
COMPLETE
message to the
CN. 25)
PRI_LDR_SYS
HO_OUT_USE
_SELECT_OPT
_SWITCH
(Optimize UE
Selection for
Outgoing InterRAT Handover
in Basic
Congestion)
Whether the
LDR algorithm
on the RNC side
updates the
attribute of
outgoing interRAT handover
for a UE after an
F2D, P2D, or
D2D state
transition
procedure. 1:
This switch is set
to on. The LDR
algorithm on the
RNC side
updates the
attribute of
outgoing interRAT handover
for a UE after an
F2D, P2D, or
D2D state
transition
procedure. In
this way, the
LDR algorithm
on the RNC side
can select
appropriate UEs
for outgoing
inter-RAT
handovers when
the cell is in
basic congestion
175
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
state. 0: This
switch is set to
off. The LDR
algorithm on the
RNC side does
not update the
attribute of
outgoing interRAT handover
for a UE after an
F2D, P2D, or
D2D state
transition
procedure.
GUI Value
Range:SYS_RE
LOC_OUT_SU
CC_STAT_OP
T_SWITCH
(SYS_RELOC_
OUT_SUCC_S
TAT_OPT_SW
ITCH),
RL_REEST_PS
_ON_FACH_S
WITCH
(RL_REEST_P
S_ON_FACH_
SWITCH),
CELLUPDATE
_MEASUREM
ENT_OPT_SW
ITCH
(CELLUPDAT
E_MEASURE
MENT_OPT_S
WITCH),
D2F_PROCED
URE_OPTIMIZ
ATION_SWIT
CH
(D2F_PROCED
URE_OPTIMIZ
ATION_SWIT
CH),
F2D_PROCED
URE_OPTIMIZ
176
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
ATION_SWIT
CH
(F2D_PROCED
URE_OPTIMIZ
ATION_SWIT
CH),
FOREVER_PC
H_CTRL_PLA
NE_SHARE_O
PT
(FOREVER_PC
H_CTRL_PLA
NE_SHARE_O
PT),
FOREVER_PC
H_USER_PLA
NE_SHARE_O
PT
(FOREVER_PC
H_USER_PLA
NE_SHARE_O
PT),
RAB_REL_SR
V_CELL_CHG
_CROSS_SWIT
CH
(RAB_REL_SR
V_CELL_CHG
_CROSS_SWIT
CH),
SCRIWITHCA
USE_OVERLA
P_SWITCH
(SCRIWITHCA
USE_OVERLA
P_SWITCH),
P2F_CUC_REP
EAT_SWITCH
(P2F_CUC_RE
PEAT_SWITC
H),
UU_ABN_REL
_INFO_NOTIF
Y_NODEB_S
WITCH
(UU_ABN_RE
L_INFO_NOTI
FY_NODEB_S
177
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
WITCH),
D2F_AM_PRO
CEDURE_OPT
IMIZATION_S
WITCH
(D2F_AM_PR
OCEDURE_OP
TIMIZATION_
SWITCH),
AM_D2F_F2D
_RESTMR_OP
TIMIZATION_
SWITCH
(AM_D2F_F2D
_RESTMR_OP
TIMIZATION_
SWITCH),
D2P_DT_MSG
_BUFFER_SWI
TCH
(D2P_DT_MSG
_BUFFER_SWI
TCH),
CM_CODE_C
ONFLICT_OPT
_SWITCH
(CM_CODE_C
ONFLICT_OPT
_SWITCH),
H_SERV_CEL
L_CHANGE_
MSG_OPT_SW
ITCH
(H_SERV_CEL
L_CHANGE_
MSG_OPT_SW
ITCH),
FAST_HSDPA
_SERV_CELL_
CHANGE_SWI
TCH
(FAST_HSDPA
_SERV_CELL_
CHANGE_SWI
TCH),
RLRST_ASU_
SUCC_COUNT
ERS_CORREC
178
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
T_SWITCH
(RLRST_ASU_
SUCC_COUNT
ERS_CORREC
T_SWITCH),
COUNT_STAT
E_CHG_BY_R
AB_EHN_SWI
TCH
(COUNT_STA
TE_CHG_BY_
RAB_EHN_SW
ITCH),
RAB_RELATE
D_COUNTER_
OPT_SWITCH
(RAB_RELAT
ED_COUNTER
_OPT_SWITC
H),
CELLUPDATE
_PROCEDURE
_OPT_SWITC
H
(CELLUPDAT
E_PROCEDUR
E_OPT_SWITC
H),
PTT_PAGING_
PRD_CRRCT_
SWITCH
(PTT_PAGING
_PRD_CRRCT
_SWITCH),
RRC_REL_ST
ATUS_RSP_R
AB_ASS_REQ
_SWITCH
(RRC_REL_ST
ATUS_RSP_R
AB_ASS_REQ
_SWITCH),
L2U_UP_DEL
AY_OPT_SWI
TCH
(L2U_UP_DEL
AY_OPT_SWI
TCH),
179
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
PRI_LDR_SYS
HO_OUT_USE
_SELECT_OPT
_SWITCH
(PRI_LDR_SY
SHO_OUT_US
E_SELECT_OP
T_SWITCH)
Unit:None
Actual Value
Range:SYS_RE
LOC_OUT_SU
CC_STAT_OP
T_SWITCH,
RL_REEST_PS
_ON_FACH_S
WITCH,
CELLUPDATE
_MEASUREM
ENT_OPT_SW
ITCH,
D2F_PROCED
URE_OPTIMIZ
ATION_SWIT
CH,
F2D_PROCED
URE_OPTIMIZ
ATION_SWIT
CH,
FOREVER_PC
H_CTRL_PLA
NE_SHARE_O
PT,
FOREVER_PC
H_USER_PLA
NE_SHARE_O
PT,
RAB_REL_SR
V_CELL_CHG
_CROSS_SWIT
CH,
SCRIWITHCA
USE_OVERLA
P_SWITCH,
P2F_CUC_REP
EAT_SWITCH,
UU_ABN_REL
180
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
_INFO_NOTIF
Y_NODEB_S
WITCH,
D2F_AM_PRO
CEDURE_OPT
IMIZATION_S
WITCH,
AM_D2F_F2D
_RESTMR_OP
TIMIZATION_
SWITCH,
D2P_DT_MSG
_BUFFER_SWI
TCH,
CM_CODE_C
ONFLICT_OPT
_SWITCH,
H_SERV_CEL
L_CHANGE_
MSG_OPT_SW
ITCH,
FAST_HSDPA
_SERV_CELL_
CHANGE_SWI
TCH,
RLRST_ASU_
SUCC_COUNT
ERS_CORREC
T_SWITCH,
COUNT_STAT
E_CHG_BY_R
AB_EHN_SWI
TCH,
RAB_RELATE
D_COUNTER_
OPT_SWITCH,
CELLUPDATE
_PROCEDURE
_OPT_SWITC
H,
PTT_PAGING_
PRD_CRRCT_
SWITCH,
RRC_REL_ST
ATUS_RSP_R
AB_ASS_REQ
_SWITCH,
L2U_UP_DEL
181
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
AY_OPT_SWI
TCH,
PRI_LDR_SYS
HO_OUT_USE
_SELECT_OPT
_SWITCH
Default
Value:SYS_RE
LOC_OUT_SU
CC_STAT_OP
T_SWITCH:
1,RL_REEST_
PS_ON_FACH
_SWITCH:
0,CELLUPDAT
E_MEASURE
MENT_OPT_S
WITCH:
0,D2F_PROCE
DURE_OPTIM
IZATION_SWI
TCH:
0,F2D_PROCE
DURE_OPTIM
IZATION_SWI
TCH:
0,FOREVER_P
CH_CTRL_PL
ANE_SHARE_
OPT:
0,FOREVER_P
CH_USER_PL
ANE_SHARE_
OPT:
0,RAB_REL_S
RV_CELL_CH
G_CROSS_SW
ITCH:
0,SCRIWITHC
AUSE_OVERL
AP_SWITCH:
0,P2F_CUC_R
EPEAT_SWIT
CH:
0,UU_ABN_RE
L_INFO_NOTI
FY_NODEB_S
182
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
WITCH:
0,D2F_AM_PR
OCEDURE_OP
TIMIZATION_
SWITCH:
0,AM_D2F_F2
D_RESTMR_O
PTIMIZATION
_SWITCH:
0,D2P_DT_MS
G_BUFFER_S
WITCH:
0,CM_CODE_
CONFLICT_O
PT_SWITCH:
1,H_SERV_CE
LL_CHANGE_
MSG_OPT_SW
ITCH:
0,FAST_HSDP
A_SERV_CEL
L_CHANGE_S
WITCH:
0,RLRST_ASU
_SUCC_COUN
TERS_CORRE
CT_SWITCH:
0,COUNT_STA
TE_CHG_BY_
RAB_EHN_SW
ITCH:
0,RAB_RELAT
ED_COUNTER
_OPT_SWITC
H:
0,CELLUPDAT
E_PROCEDUR
E_OPT_SWITC
H:
1,PTT_PAGIN
G_PRD_CRRC
T_SWITCH:
0,RRC_REL_S
TATUS_RSP_
RAB_ASS_RE
Q_SWITCH:
0,L2U_UP_DE
LAY_OPT_SW
183
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
ITCH:
1,PRI_LDR_SY
SHO_OUT_US
E_SELECT_OP
T_SWITCH:0
184
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
T305
BSC6900
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:Timer
305. T305 starts
when a UE
enters the
CELL_FACH,
URA_PCH, or
CELL_PCH
state. If the UE
receives a CELL
UPDATE
CONFIRM/
URA UPDATE
CONFIRM
message and the
UE enters the
CELL_FACH,
URA_PCH, or
CELL_PCH
state after state
transition, T305
also starts. T305
stops when the
UE enters
another state.
When T305
expires, the UE
sends a CELL
UPDATE
message if the
UE detects "in
service area"
and T307 does
not start. If the
UE detects "out
of service area"
when T305
expires, T307
starts. The
protocoldefined default
value is 30.
When this
parameter is set
to INFINITY,
the value will
not be updated.
The value of this
parameter is
WRFD-010801
WRFD-010802
WRFD-010902
WRFD-010901
185
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
contained in
SIB1 messages.
GUI Value
Range:INFINIT
Y, D5, D10,
D30, D60,
D120, D360,
D720
Unit:min
Actual Value
Range:INFINIT
Y, 5, 10, 30, 60,
120, 360, 720
Default
Value:D30
186
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
T305
BSC6910
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:Timer
305. T305 starts
when a UE
enters the
CELL_FACH,
URA_PCH, or
CELL_PCH
state. If the UE
receives a CELL
UPDATE
CONFIRM/
URA UPDATE
CONFIRM
message and the
UE enters the
CELL_FACH,
URA_PCH, or
CELL_PCH
state after state
transition, T305
also starts. T305
stops when the
UE enters
another state.
When T305
expires, the UE
sends a CELL
UPDATE
message if the
UE detects "in
service area"
and T307 does
not start. If the
UE detects "out
of service area"
when T305
expires, T307
starts. The
protocoldefined default
value is 30.
When this
parameter is set
to INFINITY,
the value will
not be updated.
The value of this
parameter is
WRFD-010801
WRFD-010802
WRFD-010902
WRFD-010901
187
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
contained in
SIB1 messages.
GUI Value
Range:INFINIT
Y, D5, D10,
D30, D60,
D120, D360,
D720
Unit:min
Actual Value
Range:INFINIT
Y, 5, 10, 30, 60,
120, 360, 720
Default
Value:D30
188
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
T302
BSC6900
SET
UCONNMODE
TIMER
WRFD-010901
Meaning:Timer
302. T302 starts
when a UE sends
a CELL
UPDATE/URA
UPDATE
message and
stops when the
UE receives a
CELL UPDATE
CONFIRM/
URA UPDATE
CONFIRM
message. When
T302 expires,
the UE resends a
CELL
UPDATE/URA
UPDATE
message if the
value of the
counter V302 is
smaller than or
equal to that of
the parameter
N302. If the
value of V302 is
larger than that
of N302 when
T302 expires,
the UE enters the
idle mode. The
protocoldefined default
value is 4000.
The value of this
parameter is
contained in
SIB1 messages.
WRFD-010902
WRFD-010101
WRFD-040100
WRFD-140103
3GPP R9
Specifications
WRFD-010801
Flow Control
WRFD-010802
Call
Reestablishment
Intra RNC Cell
Update
Inter RNC Cell
Update
GUI Value
Range:D100,
D200, D400,
D600, D800,
D1000, D1200,
D1400, D1600,
D1800, D2000,
189
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
D3000, D4000,
D6000, D8000
Unit:ms
Actual Value
Range:100, 200,
400, 600, 800,
1000, 1200,
1400, 1600,
1800, 2000,
3000, 4000,
6000, 8000
Default
Value:D2000
190
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
T302
BSC6910
SET
UCONNMODE
TIMER
WRFD-010901
Meaning:Timer
302. T302 starts
when a UE sends
a CELL
UPDATE/URA
UPDATE
message and
stops when the
UE receives a
CELL UPDATE
CONFIRM/
URA UPDATE
CONFIRM
message. When
T302 expires,
the UE resends a
CELL
UPDATE/URA
UPDATE
message if the
value of the
counter V302 is
smaller than or
equal to that of
the parameter
N302. If the
value of V302 is
larger than that
of N302 when
T302 expires,
the UE enters the
idle mode. The
protocoldefined default
value is 4000.
The value of this
parameter is
contained in
SIB1 messages.
WRFD-010902
WRFD-010101
WRFD-040100
WRFD-140103
3GPP R9
Specifications
WRFD-010801
Flow Control
WRFD-010802
Call
Reestablishment
Intra RNC Cell
Update
Inter RNC Cell
Update
GUI Value
Range:D100,
D200, D400,
D600, D800,
D1000, D1200,
D1400, D1600,
D1800, D2000,
191
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
D3000, D4000,
D6000, D8000
Unit:ms
Actual Value
Range:100, 200,
400, 600, 800,
1000, 1200,
1400, 1600,
1800, 2000,
3000, 4000,
6000, 8000
Default
Value:D2000
T307
BSC6900
SET
UCONNMODE
TIMER
WRFD-010101
WRFD-010801
WRFD-010802
WRFD-010902
WRFD-010901
3GPP R9
Specifications
Intra RNC Cell
Update
Inter RNC Cell
Update
Inter RNC URA
Update
Intra RNC URA
Update
Meaning:Timer
307. T307 starts
when T305
expires and the
UE detects "out
of service area."
T307 stops
when the UE
detects "in
service area."
When T307
expires, the UE
enters the idle
mode. The
protocoldefined default
value is 30. The
value of this
parameter is
contained in
SIB1 messages.
GUI Value
Range:D5, D10,
D15, D20, D30,
D40, D50
Unit:s
Actual Value
Range:5, 10, 15,
20, 30, 40, 50
Default
Value:D30
192
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
T307
BSC6910
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:Timer
307. T307 starts
when T305
expires and the
UE detects "out
of service area."
T307 stops
when the UE
detects "in
service area."
When T307
expires, the UE
enters the idle
mode. The
protocoldefined default
value is 30. The
value of this
parameter is
contained in
SIB1 messages.
WRFD-010801
WRFD-010802
WRFD-010902
WRFD-010901
GUI Value
Range:D5, D10,
D15, D20, D30,
D40, D50
Unit:s
Actual Value
Range:5, 10, 15,
20, 30, 40, 50
Default
Value:D30
193
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
N302
BSC6900
SET
UCONNMODE
TIMER
WRFD-010901
Meaning:Maxi
mum number of
retransmissions
of the CELL
UPDATE/URA
UPDATE
message. The
protocoldefined default
value is 3. The
value of this
parameter is
contained in
SIB1 messages.
WRFD-010902
WRFD-010101
WRFD-140103
WRFD-010801
WRFD-010802
GUI Value
Range:0~7
Unit:None
Actual Value
Range:0~7
Default Value:3
N302
BSC6910
SET
UCONNMODE
TIMER
WRFD-010901
WRFD-010902
WRFD-010101
WRFD-140103
WRFD-010801
WRFD-010802
Meaning:Maxi
mum number of
retransmissions
of the CELL
UPDATE/URA
UPDATE
message. The
protocoldefined default
value is 3. The
value of this
parameter is
contained in
SIB1 messages.
GUI Value
Range:0~7
Unit:None
Actual Value
Range:0~7
Default Value:3
194
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
URAId
BSC6900
ADD
UCELLURA
WRFD-010101
3GPP R9
Specifications
Meaning:Identit
y of the UTRAN
registration area.
The URA is only
used by the
UTRAN and the
CN does not
know the URA.
The URA
consists of
multiple cells.
When the UE
enters the URAPCH state, the
location of the
UE is identified
with the URA
ID.The URA is
an area covered
by cells. In this
area, a UE in the
URA_PCH state
does not need to
frequently
perform cell
update. One cell
can belong to
multiple URAs.
The RNC
identifies a URA
by using the
URA ID. Each
URA ID is
uniquely
numbered
within a RNC.
The URA IDs
range from 0 to
65535. For
details about this
parameter, see
3GPP TS 25.331
protocol.
RMV
UCELLURA
GUI Value
Range:0~65535
Unit:None
195
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Actual Value
Range:0~65535
Default
Value:None
196
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
URAId
BSC6910
ADD
UCELLURA
WRFD-010101
3GPP R9
Specifications
Meaning:Identit
y of the UTRAN
registration area.
The URA is only
used by the
UTRAN and the
CN does not
know the URA.
The URA
consists of
multiple cells.
When the UE
enters the URAPCH state, the
location of the
UE is identified
with the URA
ID.The URA is
an area covered
by cells. In this
area, a UE in the
URA_PCH state
does not need to
frequently
perform cell
update. One cell
can belong to
multiple URAs.
The RNC
identifies a URA
by using the
URA ID. Each
URA ID is
uniquely
numbered
within a RNC.
The URA IDs
range from 0 to
65535. For
details about this
parameter, see
3GPP TS 25.331
protocol.
RMV
UCELLURA
GUI Value
Range:0~65535
Unit:None
197
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Actual Value
Range:0~65535
Default
Value:None
ConnQhyst1s
BSC6900
ADD
UCELLSELRE
SEL
MOD
UCELLSELRE
SEL
WRFD-010901
WRFD-010801
WRFD-010802
WRFD-010902
Meaning:Hyster
esis value of the
serving cell in
connected mode
when
"QualMeas" is
set to
CPICH_RSCP
(CPICH
RSCP).The sum
of the
measurement
value of the
serving cell and
the hysteresis
value is used in
the R criteria for
cell reselection.
For details about
this parameter,
see 3GPP TS
25.304.
GUI Value
Range:0~20
Unit:2dB
Actual Value
Range:0~40
Default Value:2
198
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
ConnQhyst1s
BSC6910
ADD
UCELLSELRE
SEL
WRFD-010901
Meaning:Hyster
esis value of the
serving cell in
connected mode
when
"QualMeas" is
set to
CPICH_RSCP
(CPICH
RSCP).The sum
of the
measurement
value of the
serving cell and
the hysteresis
value is used in
the R criteria for
cell reselection.
For details about
this parameter,
see 3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010801
WRFD-010802
WRFD-010902
GUI Value
Range:0~20
Unit:2dB
Actual Value
Range:0~40
Default Value:2
199
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
ConnQhyst2s
BSC6900
ADD
UCELLSELRE
SEL
WRFD-010901
Meaning:Hyster
esis value of the
serving cell in
connected mode
when
"QualMeas" is
set to
CPICH_ECNO
(CPICH Ec/N0).
The sum of the
measurement
value of the
serving cell and
the hysteresis
value is used in
the R criteria for
cell reselection.
For details about
this parameter,
see 3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010801
WRFD-010802
WRFD-010902
GUI Value
Range:
0~20;255
Unit:2dB
Actual Value
Range:0~40,
255
Default Value:1
200
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
ConnQhyst2s
BSC6910
ADD
UCELLSELRE
SEL
WRFD-010901
Meaning:Hyster
esis value of the
serving cell in
connected mode
when
"QualMeas" is
set to
CPICH_ECNO
(CPICH Ec/N0).
The sum of the
measurement
value of the
serving cell and
the hysteresis
value is used in
the R criteria for
cell reselection.
For details about
this parameter,
see 3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010801
WRFD-010802
WRFD-010902
GUI Value
Range:
0~20;255
Unit:2dB
Actual Value
Range:0~40,
255
Default Value:1
201
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
QualMeas
BSC6900
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:Measu
rement quantity
of cell selection
and reselection.
For details about
this parameter,
see 3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010802
GUI Value
Range:CPICH_
ECNO(CPICH
Ec/N0),
CPICH_RSCP
(CPICH RSCP)
Unit:None
Actual Value
Range:CPICH_
ECNO,
CPICH_RSCP
Default
Value:CPICH_
ECNO(CPICH
Ec/N0)
202
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
QualMeas
BSC6910
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:Measu
rement quantity
of cell selection
and reselection.
For details about
this parameter,
see 3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010802
GUI Value
Range:CPICH_
ECNO(CPICH
Ec/N0),
CPICH_RSCP
(CPICH RSCP)
Unit:None
Actual Value
Range:CPICH_
ECNO,
CPICH_RSCP
Default
Value:CPICH_
ECNO(CPICH
Ec/N0)
203
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
Qqualmin
BSC6900
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:The
minimum
required quality
threshold
corresponding
to CPICH Ec/
No. When the
measured
CPICH Ec/No is
larger than the
value of this
parameter, the
cell meets the S
criteria of
quality level for
cell selection/
reselection. The
RNC decides
whether the UE
can camp on the
cell according to
the cell
selection/
reselection
criteria. For
details about this
parameter, see
3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010802
GUI Value
Range:-24~0
Unit:dB
Actual Value
Range:-24~0
Default
Value:-18
204
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
Qqualmin
BSC6910
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:The
minimum
required quality
threshold
corresponding
to CPICH Ec/
No. When the
measured
CPICH Ec/No is
larger than the
value of this
parameter, the
cell meets the S
criteria of
quality level for
cell selection/
reselection. The
RNC decides
whether the UE
can camp on the
cell according to
the cell
selection/
reselection
criteria. For
details about this
parameter, see
3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010802
GUI Value
Range:-24~0
Unit:dB
Actual Value
Range:-24~0
Default
Value:-18
205
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
Qhyst1spch
BSC6900
ADD
UCELLSELRE
SEL
WRFD-010901
Meaning:Measu
rement
hysteresis 1 of a
UE in the
CELL_PCH or
URA_PCH
state. This
parameter is not
used when its
value is 255. For
details about this
parameter, see
3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010801
WRFD-010802
WRFD-010902
GUI Value
Range:
0~40;255
Unit:dB
Actual Value
Range:0~40,
255
Default Value:
255
206
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
Qhyst1spch
BSC6910
ADD
UCELLSELRE
SEL
WRFD-010901
Meaning:Measu
rement
hysteresis 1 of a
UE in the
CELL_PCH or
URA_PCH
state. This
parameter is not
used when its
value is 255. For
details about this
parameter, see
3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010801
WRFD-010802
WRFD-010902
GUI Value
Range:
0~40;255
Unit:dB
Actual Value
Range:0~40,
255
Default Value:
255
Qhyst1sfach
BSC6900
ADD
UCELLSELRE
SEL
MOD
UCELLSELRE
SEL
WRFD-010801
WRFD-010802
Meaning:Measu
rement
hysteresis 1 of a
UE in the
CELL_FACH
state. This
parameter is not
used when its
value is 255. For
details about this
parameter, see
3GPP TS
25.304.
GUI Value
Range:
0~40;255
Unit:dB
Actual Value
Range:0~40,
255
Default Value:
255
207
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
Qhyst1sfach
BSC6910
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:Measu
rement
hysteresis 1 of a
UE in the
CELL_FACH
state. This
parameter is not
used when its
value is 255. For
details about this
parameter, see
3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010802
GUI Value
Range:
0~40;255
Unit:dB
Actual Value
Range:0~40,
255
Default Value:
255
208
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
Qhyst2spch
BSC6900
ADD
UCELLSELRE
SEL
WRFD-010901
Meaning:Measu
rement
hysteresis 2 of a
UE in the
CELL_PCH or
URA_PCH
state. When this
parameter is set
to 255, the value
of "Qhyst1spch"
is used. For
details about this
parameter, see
3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010801
WRFD-010802
WRFD-010902
GUI Value
Range:
0~40;255
Unit:dB
Actual Value
Range:0~40,
255
Default Value:
255
209
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
Qhyst2spch
BSC6910
ADD
UCELLSELRE
SEL
WRFD-010901
Meaning:Measu
rement
hysteresis 2 of a
UE in the
CELL_PCH or
URA_PCH
state. When this
parameter is set
to 255, the value
of "Qhyst1spch"
is used. For
details about this
parameter, see
3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010801
WRFD-010802
WRFD-010902
GUI Value
Range:
0~40;255
Unit:dB
Actual Value
Range:0~40,
255
Default Value:
255
210
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
Qhyst2sfach
BSC6900
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:Measu
rement
hysteresis 2 of a
UE in the
CELL_FACH
state. When this
parameter is set
to 255, the value
of "Qhyst1spch"
is used. For
details about this
parameter, see
3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010802
GUI Value
Range:
0~40;255
Unit:dB
Actual Value
Range:0~40,
255
Default Value:
255
211
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
Qhyst2sfach
BSC6910
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:Measu
rement
hysteresis 2 of a
UE in the
CELL_FACH
state. When this
parameter is set
to 255, the value
of "Qhyst1spch"
is used. For
details about this
parameter, see
3GPP TS
25.304.
WRFD-010802
MOD
UCELLSELRE
SEL
GUI Value
Range:
0~40;255
Unit:dB
Actual Value
Range:0~40,
255
Default Value:
255
Treselectionspc
h
BSC6900
ADD
UCELLSELRE
SEL
MOD
UCELLSELRE
SEL
WRFD-010801
WRFD-010802
Meaning:Resele
ction delay of a
UE in the
CELL_PCH or
URA_PCH
state. This
parameter is not
used when its
value is 255. For
details about this
parameter, see
3GPP TS
25.304.
GUI Value
Range:
0~31;255
Unit:s
Actual Value
Range:0~31,
255
Default Value:
255
212
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
Treselectionspc
h
BSC6910
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:Resele
ction delay of a
UE in the
CELL_PCH or
URA_PCH
state. This
parameter is not
used when its
value is 255. For
details about this
parameter, see
3GPP TS
25.304.
WRFD-010802
MOD
UCELLSELRE
SEL
GUI Value
Range:
0~31;255
Unit:s
Actual Value
Range:0~31,
255
Default Value:
255
Treselectionsfach
BSC6900
ADD
UCELLSELRE
SEL
MOD
UCELLSELRE
SEL
WRFD-010801
WRFD-010802
Meaning:Resele
ction delay of a
UE in the
CELL_FACH
state. This
parameter is not
used when its
value is 255. For
details about this
parameter, see
3GPP TS
25.304.
GUI Value
Range:
0~31;255
Unit:0.2s
Actual Value
Range:0~6.2,
255
Default Value:
255
213
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
Treselectionsfach
BSC6910
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:Resele
ction delay of a
UE in the
CELL_FACH
state. This
parameter is not
used when its
value is 255. For
details about this
parameter, see
3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010802
GUI Value
Range:
0~31;255
Unit:0.2s
Actual Value
Range:0~6.2,
255
Default Value:
255
214
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
T313
BSC6900
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:Timer
313. T313 stars
when a UE
detects N313
successive "out
of sync"
indications from
Layer 1 and
stops when the
UE detects
N315 successive
"in sync"
indications form
Layer 1. When
T313 expires,
the radio link
setup fails. The
protocoldefined default
value is 3. The
value of this
parameter is
contained in
SIB1 messages.
WRFD-140103
WRFD-010802
WRFD-010801
Call
Reestablishment
Inter RNC Cell
Update
Intra RNC Cell
Update
GUI Value
Range:0~15
Unit:s
Actual Value
Range:0~15
Default Value:3
215
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
T313
BSC6910
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:Timer
313. T313 stars
when a UE
detects N313
successive "out
of sync"
indications from
Layer 1 and
stops when the
UE detects
N315 successive
"in sync"
indications form
Layer 1. When
T313 expires,
the radio link
setup fails. The
protocoldefined default
value is 3. The
value of this
parameter is
contained in
SIB1 messages.
WRFD-140103
WRFD-010802
WRFD-010801
Call
Reestablishment
Inter RNC Cell
Update
Intra RNC Cell
Update
GUI Value
Range:0~15
Unit:s
Actual Value
Range:0~15
Default Value:3
216
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
N313
BSC6900
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:Maxi
mum number of
successive "out
of sync"
indications
received from
Layer 1. The
protocoldefined default
value is 20. The
value of this
parameter is
contained in
SIB1 messages.
WRFD-140103
WRFD-010802
WRFD-010801
Call
Reestablishment
Inter RNC Cell
Update
Intra RNC Cell
Update
GUI Value
Range:D1, D2,
D4, D10, D20,
D50, D100,
D200
Unit:None
Actual Value
Range:1, 2, 4,
10, 20, 50, 100,
200
Default
Value:D50
217
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
N313
BSC6910
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:Maxi
mum number of
successive "out
of sync"
indications
received from
Layer 1. The
protocoldefined default
value is 20. The
value of this
parameter is
contained in
SIB1 messages.
WRFD-140103
WRFD-010802
WRFD-010801
Call
Reestablishment
Inter RNC Cell
Update
Intra RNC Cell
Update
GUI Value
Range:D1, D2,
D4, D10, D20,
D50, D100,
D200
Unit:None
Actual Value
Range:1, 2, 4,
10, 20, 50, 100,
200
Default
Value:D50
218
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
N315
BSC6900
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:Maxi
mum number of
successive "in
sync"
indications
received from
Layer 1 after
T313 starts. The
protocoldefined default
value is 1. The
value of this
parameter is
contained in
SIB1 messages.
WRFD-140103
WRFD-010802
WRFD-010801
Call
Reestablishment
Inter RNC Cell
Update
Intra RNC Cell
Update
GUI Value
Range:D1, D2,
D4, D10, D20,
D50, D100,
D200, D400,
D600, D800,
D1000
Unit:None
Actual Value
Range:1, 2, 4,
10, 20, 50, 100,
200, 400, 600,
800, 1000
Default
Value:D1
219
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
N315
BSC6910
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:Maxi
mum number of
successive "in
sync"
indications
received from
Layer 1 after
T313 starts. The
protocoldefined default
value is 1. The
value of this
parameter is
contained in
SIB1 messages.
WRFD-140103
WRFD-010802
WRFD-010801
Call
Reestablishment
Inter RNC Cell
Update
Intra RNC Cell
Update
GUI Value
Range:D1, D2,
D4, D10, D20,
D50, D100,
D200, D400,
D600, D800,
D1000
Unit:None
Actual Value
Range:1, 2, 4,
10, 20, 50, 100,
200, 400, 600,
800, 1000
Default
Value:D1
220
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
T316
BSC6900
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:Timer
316. T316 starts
when a UE is in
the URA_PCH
or CELL_PCH
state and detects
"out of service
area." T316
stops when the
UE detects "in
service area."
When T316
expires, the UE
initiates the cell
update
procedure if it
detects "in
service area." If
the UE detects
"out of service
area" when
T316 expires,
the UE starts
T317. Then, the
UE will enter the
CELL_FACH
state and initiate
cell update
procedure when
the UE detects
"in service
area." The
protocoldefined default
value is 30. The
value of this
parameter is
contained in
SIB1 messages.
WRFD-010801
WRFD-010802
WRFD-010902
WRFD-010901
GUI Value
Range:D0, D10,
D20, D30, D40,
D50, INFINITY
Unit:s
Actual Value
Range:0, 10, 20,
221
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
30, 40, 50,
INFINITY
Default
Value:D30
222
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
T316
BSC6910
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:Timer
316. T316 starts
when a UE is in
the URA_PCH
or CELL_PCH
state and detects
"out of service
area." T316
stops when the
UE detects "in
service area."
When T316
expires, the UE
initiates the cell
update
procedure if it
detects "in
service area." If
the UE detects
"out of service
area" when
T316 expires,
the UE starts
T317. Then, the
UE will enter the
CELL_FACH
state and initiate
cell update
procedure when
the UE detects
"in service
area." The
protocoldefined default
value is 30. The
value of this
parameter is
contained in
SIB1 messages.
WRFD-010801
WRFD-010802
WRFD-010902
WRFD-010901
GUI Value
Range:D0, D10,
D20, D30, D40,
D50, INFINITY
Unit:s
Actual Value
Range:0, 10, 20,
223
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
30, 40, 50,
INFINITY
Default
Value:D30
224
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
OptimizationSwitch
BSC6900
SET
URRCTRLSWI
TCH
WRFD-021101
Dynamic
Channel
Configuration
Control (DCCC)
Meaning:1.
PAGGING_NU
M_CTRL_SWI
TCH Maximum
number of
paging attempts
in the RAN
network when
no response is
received after a
paging message
is sent. 1: This
switch is turned
on. The paging
message is sent
for a maximum
of 5 times. 0:
This switch is
turned off. The
paging message
is sent for a
maximum of 10
times. 2.
ASU_RL_RES
ET_SWITCH
(Switch for RL
Reestablishment
During Soft
Handover)
Whether to
trigger radio link
(RL)
reestablishment
during a soft
handover. 1:
This switch is
turned on. A UE
sends a CELL
UPDATE
message to the
RNC and
subsequently the
RNC
reestablishes the
RL for the UE
when both of the
following
conditions are
WRFD-010510
WRFD-010651
WRFD-140103
WRFD-040100
WRFD-010507
WRFD-140226
WRFD-020500
WRFD-010301
WRFD-010615
02
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
HSDPA over Iur
WRFD-010801
Call
Reestablishment
WRFD-010802
Flow Control
WRFD-011402
Rate
Negotiation at
Admission
Control
WRFD-010615
04
Fast Return
from UMTS to
LTE
Enhanced Fast
Dormancy
Paging UE in
Idle,
CELL_PCH,
URA_PCH
State (Type 1)
Combination of
One CS Service
and Two PS
Services
Intra RNC Cell
Update
Inter RNC Cell
Update
Encryption
Combination of
One CS Service
and Three PS
Services
225
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
met: -The RNC
is waiting for the
UE's response to
the ACTIVE
SET UPDATE
message. -The
RNC detects
that downlink
transmission on
signaling radio
bearer (SRB2) is
disconnected or
the NodeB
reports that all
RLs for the UE
are out of
synchronization
. 0: This switch
is turned off.
The RNC does
not reestablish
the RL for the
UE when the
preceding
conditions are
met. 3.
MC_RL_RESE
T_SWITCH
(Switch for RL
Reestablishment
During Meas
Control)
Whether to
trigger RL
reestablishment
during
measurement
control. 1: This
switch is turned
on. A UE sends a
CELL UPDATE
message to the
RNC and
subsequently the
RNC
reestablishes the
RL for the UE
when both of the
226
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
following
conditions are
met: -The RNC
has sent a
MEASUREME
NT CONTROL
message to the
UE. -The RNC
detects that
downlink
transmission on
SRB2 is
disconnected
when the UE
state is stable. 0:
This switch is
turned off. The
RNC does not
reestablish the
RL for the UE
when the
preceding
conditions are
met. 4.
FD_PCH_REE
NTERSA_FOR
CE_RRC_REL
_SWITCH.
Whether to
enable the RNC
to release the
RRC connection
of an EFDcapable UE that
received an
SCRI message
from the PS
domain of the
CN if the UE
sends the RNC a
CELL UPDATE
message after
reentering a
service area.
When this
switch is turned
on, the RNC
releases the
227
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RRC connection
of such a UE in
the preceding
scenario. This
solves the
problem that a
network
becomes
inaccessible
when such a UE
reenters a
service area. 1:
This switch is
turned on. The
RNC directly
releases the
RRC connection
after receiving
the CELL
UPDATE
message from
the Enhanced
Fast Dormancycapable that
leaves and then
reenters the
service area. 0:
This switch is
turned off. The
RNC processes
the CELL
UPDATE
message
received from
the Enhanced
Fast Dormancycapable UE that
leaves and then
reenters the
service area. 5.
UE_CRC_COM
PATIBLE_SWI
TCH. Whether
the RNC
normally
releases
connections
when it detects
228
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
failed cyclic
redundancy
check (CRC) on
RB SETUP
COMPLETE or
RB
RECONFIGUR
ATION
COMPLETE
messages
received from
HSDPA UEs. 1:
This switch is
turned on. The
RNC normally
releases the
connections
when it detects
the failed CRC.
0: This switch is
turned off. The
RNC
abnormally
releases the
connections
when it detects
the failed CRC.
6.
RNC_P2D_DR
D_SWITCH.
Whether the
RNC performs
the directed
retry decision
(DRD) when it
receives a CELL
UPDATE
message with
the cause value
"uplink data
transmission" or
" paging
response"
during UEs'
state transition
from
CELL_PCH or
URA_PCH to
229
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CELL_DCH. 1:
This switch is
turned on. The
RNC performs
the DRD in the
preceding
scenario. 0: This
switch is turned
off. The RNC
does not
perform the
DRD in the
preceding
scenario. 7.
P2D_SWITCH
Whether the
RNC switches a
UE from the
CELL_PCH or
URA_PCH state
to the
CELL_DCH
state when the
following
conditions are
met: The UE
sends the RNC a
CELL UPDATE
message with
the cause value
"uplink data
transmission" or
"paging
response." The
number of UEs
on the FACH
reaches the
upper limit or
the UE is to set
up a CS service
but the common
channel is
congested. 1:
This switch is set
to on. The RNC
switches the UE
from the
CELL_PCH or
230
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
URA_PCH state
to the
CELL_DCH
state in the
preceding
scenario. 0: This
switch is set to
off. The RNC
does not switch
the UE from the
CELL_PCH or
URA_PCH state
to the
CELL_DCH
state in the
preceding
scenario. This
parameter can
be set in both the
"SET
URRCTRLSWI
TCH" and
"ADD
UCELLCONN
ALGOPARA"
commands. The
value of this
parameter in the
"ADD
UCELLCONN
ALGOPARA"
command
prevails. 8.
AMR_F2D_OV
ERLAP_CELL
UPT_SWITCH
Whether the
RNC proceeds
with CS service
setups involving
state transitions
from
CELL_FACH to
CELL_DCH if
the UEs in
question report
cell updates
during the setup
231
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
procedure. 1:
This switch is
turned on. The
RNC first
processes the
CELL UPDATE
message and
then proceeds
with the CS
service setup
procedure. 0:
This switch is
turned off. The
RNC processes
the CELL
UPDATE
message and
does not proceed
with the CS
service setup.
This results in
service setup
failures. 9.
SRB_RESET_R
L_SETUP_SWI
TCH Whether
the RNC
reestablishes a
radio link (RL)
when it detects
an SRB reset
reported on
Layer 2 for
decreasing the
number of UE
call drops 1:
This switch is
turned on. The
RNC
reestablishes an
RL when it
detects the SRB
reset. 0: This
switch is turned
off. The RNC
does not
reestablish an
RL when it
232
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
detects the SRB
reset. 10.
RLFAIL_RL_S
ETUP_SWITC
H Whether
active link reestablishment is
allowed after the
radio link fails 1:
This switch is
turned on.
Active link reestablishment is
allowed after the
RNC receives a
RADIO LINK
FAILURE
INDICATION
message and the
timer used to
wait for a
RADIO LINK
RESTORE
INDICATION
message from
the NodeB
expires. 0: This
switch is turned
off. Active link
re-establishment
is not allowed
after the RNC
receives a
RADIO LINK
FAILURE
INDICATION
message and the
timer used to
wait for a
RADIO LINK
RESTORE
INDICATION
message from
the NodeB
expires. 11.
CS_RL_SETUP
_SWITCH
Whether the
233
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RNC
reestablishes a
radio link (RL)
when SRBs of a
CS service reset
or all its RLs are
out of
synchronization
. 1: This switch
is turned on. The
RNC
reestablishes an
RL in the
preceding
scenario. 0: This
switch is turned
off. The RNC
does not
reestablish an
RL in the
preceding
scenario. 12.
PS_RL_SETUP
_SWITCH
Whether PS
services can
trigger active
link reestablishment 1:
This switch is
turned on. PS
services can
trigger active
link reestablishment.
0: This switch is
turned off. PS
services cannot
trigger active
link reestablishment.
13.
UE_SRB_RES
ET_SWITCH
Whether the
RNC
reestablishes a
radio link (RL)
234
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
when it receives
a CELL
UPDATE
message
carrying SRB
reset
information. 1:
This switch is
turned on. The
RNC does not
release the RRC
connection and
it reestablishes
an RL. 0: This
switch is turned
off. The RNC
releases the
RRC
connection. 14.
RL_RESTORE
_SWITCH
Switch for the
radio link
restoration timer
1: This switch is
turned on. If
there are CS
services and the
last radio link
fails, the RNC
waits for the
radio link to
restore before
the timer T313
expires. 0: This
switch is turned
off. If there are
CS services and
the last radio
link fails, the
RNC waits for
the radio link to
restore before
the original
timer expires.
15.
RNC_EFD_D2
F_SWITCH
235
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Whether to
enable RNClevel UE state
transition from
CELL_DCH to
CELL_FACH
(D2F) for fast
dormancycapable UEs. 1:
This switch is
turned on. The
D2F state
transition is
enabled for the
fast dormancycapable UEs.. 0:
This switch is
turned off. The
state transition
from
CELL_DCH to
CELL_PCH
(D2P) is enabled
for the fast
dormancycapable UEs 16.
RNC_RB_SCRI
_NOT_DROP_
SWITCH
Whether the RB
release due to
SCRI during RB
reconfiguration
is calculated as a
call drop 1: This
switch is turned
on. The RB
release due to
SCRI during
reconfiguration
is not calculated
as a call drop. 0:
This switch is
turned off. The
RB release due
to SCRI during
reconfiguration
is calculated as a
236
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
call drop. 17.
RRC_RECONN
_SWITCH
Switch for the
RNC to process
the RRC
connection
setup requests
from a UE. 1:
This switch is
turned on. The
RNC releases
the established
RRC connection
when the UE
retransmits RRC
connection
setup requests.
0: This switch is
turned off.
When the UE
retransmits the
RRC connection
setup request to
access the same
cell, the RNC
rejects the new
RRC connection
setup requests.
When the UE
retransmits the
RRC connection
setup request to
access different
cells, the RNC
releases the
established RRC
connection. It is
recommended
that this
parameter be set
to its default
value and the
parameter value
be not changed.
If you need to
change the value
of this
237
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
parameter, ask
for assistance
from Huawei
technical
support
personnel. 18.
RRC_REPEAT
_PFM_SWITC
H Whether the
RNC counts the
number of
retransmitted
RRC connection
setup requests in
the
measurement of
the
RRC.AttConnE
stab.Reg and
RRC.AttConnE
stab.Detac
performance
counters. 1: This
switch is turned
on. The RNC
counts the
number of
retransmitted
RRC connection
setup requests in
the
measurement of
the two
preceding
performance
counters. 0: This
switch is turned
off. The RNC
does not count
the number of
retransmitted
RRC connection
setup requests in
the
measurement of
the two
preceding
performance
238
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
counters. 19.
F2D_NO_RSP_
RRCREL_SWI
TCH Whether
the RNC
releases the
RRC connection
of a UE if the UE
does not respond
to the RNC after
its three failed
attempts at the
state transition
from
CELL_FACH to
CELL_DCH. 1:
This switch is
turned on. The
RRC connection
is released with
the cause "User
Inactive" after
the UE fails in
the state
transition from
CELL_FACH to
CELL_DCH for
three times. The
connection
release is
measured in the
VS.MBMS.RB.
PTP.Loss.Abno
rm counter. 0:
This switch is
turned off. The
RRC connection
is not released
after the UE fails
in the state
transition from
CELL_FACH to
CELL_DCH
three times, and
the UE remains
in the
CELL_FACH
state. 20.
239
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CS_SETUP_P2
D_SWITCH
Whether a UE in
the CELL_PCH
or URA_PCH
state
preferentially
performs a state
transition from
CELL_PCH or
URA_PCH to
CELL_DCH or
CELL_FACH
before initiating
a CS service. 1:
This switch is
turned on. The
RNC first
performs a state
transition from
CELL_PCH or
URA_PCH to
CELL_DCH
and then
initiates the CS
service. 0: This
switch is turned
off. The UE first
performs a state
transition from
CELL_PCH or
URA_PCH to
CELL_FACH
and then
initiates the CS
service. 21.
SYSHO_CIPH
ER_IE_SWITC
H Whether the
relocation
command sent
from a UMTS
network to an
unencrypted
GSM network
carries the
UEA0
encryption
240
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
information
element (IE)
when a UE
complying with
3GPP Release 6
or later is handed
over from the
GSM network to
the UMTS
network. 1: This
switch is turned
on. The
relocation
command does
not carry any
encryption IE. 0:
This switch is
turned off. The
relocation
command
carries the
UEA0
encryption IE.
22.
P2P_GTPU_N
OT_CFG_SWI
TCH Whether to
reconfigure the
GPRS
Tunneling
Protocol User
plane (GTP-U)
when a UE in the
CELL_PCH
state performs a
cell update. 1:
This switch is
turned on. The
GTP-U is not
reconfigured in
the preceding
scenario. 0: This
switch is turned
off. The GTP-U
is reconfigured
in the preceding
scenario. 23.
RB_SETUP_CI
241
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
PHER_TIME_
ADJ_SWITCH
Whether the
RNC adjusts the
activation time
for encryption
parameters
based on an RB
SETUP
COMPLETE
message 1: This
switch is turned
on. The RNC
does not adjust
the activation
time for
encryption
parameters as
long as the
difference
between the
activation times
specified in an
RB SETUP
COMPLETE
message and in
the
corresponding
RB SETUP
message is
smaller than 200
connection
frame numbers
(CFNs). 0: This
switch is turned
off. The RNC
always adjusts
the activation
time for
encryption
parameters
based on an RB
SETUP
COMPLETE
message,
regardless of the
preceding
difference. 24.
242
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CS_PRI_MOD_
NOT_INT_SWI
TCH Whether
the RNC
reinitiates CS
services upon
receiving a RAB
ASSIGNMENT
REQUEST
message in
which only the
CS allocation/
retention
priority (CARP)
is changed. 1:
This switch is
turned on. The
RNC does not
reinitiate CS
services, which
prevents CS call
drops. 0: This
switch is turned
off. The RNC
reinitiates CS
services, which
results in CS call
drops. 25.
RAB_SETUP_
TMSI_REALL
OC_BUF_SWI
TCH Whether
the RNC buffers
a TMSI
REALLOCATI
ON
COMMAND
message
received during
an RAB setup. 1:
This switch is
turned on. The
RNC buffers the
TMSI
REALLOCATI
ON
COMMAND
message
243
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
received during
the RAB setup
and then
forwards the
message to a UE
after the RAB
setup. 0: This
switch is turned
off. The RNC
does not buffer
the TMSI
REALLOCATI
ON
COMMAND
message
received during
the RAB setup.
The RNC
directly
forwards the
message to a
UE. 26.
IU_FAULT_RE
L_PS_RES_SW
ITCH Whether
an UCP
subsystem sends
a PS service
release message
to an Iu-PS
interface board
in case of a
faulty IP path, a
faulty Signaling
Connection
Control Part
(SCCP) link, or
a reset on the Iu
interface 1: This
switch is turned
on. The UCP
subsystem sends
the PS service
release message
to the Iu-PS
interface board.
0: This switch is
turned off. The
244
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
UCP subsystem
does not send
any PS service
release message
to the Iu-PS
interface board.
27.
RB_RECFG_R
L_REEST_SWI
TCH Whether
the RNC
initiates radio
link (RL)
reestablishment
during a radio
bearer (RB)
reconfiguration
when the RNC
detects that a
signaling radio
bearer (SRB) is
reset or all RLs
for a UE are out
of
synchronization
1: This switch is
turned on. The
RNC initiates
RL
reestablishment
during the RB
reconfiguration.
0: This switch is
turned off. The
RNC does not
initiate RL
reestablishment
during the RB
reconfiguration.
28.
F2P_DT_MSG_
BUFFER_SWI
TCH Whether
the RNC buffers
a DIRECT
TRANSFER
message
received from
245
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
the CN and
sends a
PAGING
message after
the RNC
receives a
RADIO
BEARER
RECONFIGUR
ATION
COMPLETE
message from a
UE moving
from the
CELL_FACH to
CELL_PCH
state (F2P for
short) 1: This
switch is turned
on. The RNC
buffers the
DIRECT
TRANSFER
message and
sends the
PAGING
message to the
UE. 0: This
switch is turned
off. The RNC
does not buffer
the DIRECT
TRANSFER
message. 29.
SCRI_COMPA
TIBLE_SWITC
H Whether the
RNC performs
compatibility
processing upon
receiving a
Signalling
Connection
Release
Indication
message with
the cause value
"UE Requested
246
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
PS Data Session
End" when CS
+PS combined
services are
performed. 1:
This switch is
turned on. The
RNC performs
compatibility
processing. It
sends an RB
RELEASE
message
containing the
Signalling
Connection
Release
Indication
information
element (IE) to
instruct a UE to
release the
signaling
connection in
the
corresponding
domain. 0: This
switch is turned
off. The RNC
does not
perform
compatibility
processing and it
discards the
SCRI message.
30.
GTPU_ERR_IN
D_DEF_SWIT
CH Whether the
RNC measures
the number of
call drops when
it receives a
GTPU Error
Indication
message
pertaining to a
UE from the CN
247
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
and releases the
RRC
connection. 1:
This switch is
turned on. The
RNC does not
measure the
number of call
drops in the
preceding
scenario. 0: This
switch is turned
off. The RNC
measures the
number of call
drops when
releasing PS
services. 31.
IUR_SRV_CEL
L_CHG_MAC
HS_RESET_S
WITCH
Whether the
RNC contains
the MAC-hs
reset indicator
information
element (IE) in
the PHYSICAL
CHANNEL
RECONFIGUR
ATION and
RADIO
BEARER
RECONFIGUR
ATION
messages for a
reset of the
MAC-hs entity.
The two
messages are
sent to a UE
when a service
link over the Iur
interface
changes. 1: This
switch is turned
on. The RNC
248
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
contains the
MAC-hs reset
indicator IE in
the two
preceding
messages. 0:
This switch is
turned off. The
RNC does not
contain the
MAC-hs reset
indicator IE in
the two
preceding
messages. 32.
UL_INTEG_A
LGO_COMPA
T_SWITCH(UL
Integrity
Compatibility
Optimization
Switch)
Whether the
RNC performs
integrity check
on uplink RRC
messages that do
not contain
integrity
protection
information
after the security
mode is started.
1: This switch is
turned on. When
this switch is set
to on, the RNC
does not
perform
integrity check
on three
messages that do
not contain
integrity
protection
information and
are subsequent
to the security
249
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
mode complete
message. If
other messages
do not contain
integrity
protection
information, the
RNC determines
that these
messages fail
the integrity
check. If a
message
contains
integrity
protection
information but
its subsequent
messages do not,
the RNC
determines that
the subsequent
messages fail
the integrity
check. 0: This
switch is turned
off. When this
switch is set to
off, the RNC
determines that
the messages
subsequent to
the security
mode complete
message fail the
integrity check
if these
messages do not
contain integrity
protection
information.
GUI Value
Range:PAGGIN
G_NUM_CTRL
_SWITCH
(PAGGING_N
UM_CTRL_S
250
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
WITCH),
ASU_RL_RES
ET_SWITCH
(ASU_RL_RES
ET_SWITCH),
MC_RL_RESE
T_SWITCH
(MC_RL_RESE
T_SWITCH),
FD_PCH_REE
NTERSA_FOR
CE_RRC_REL
_SWITCH
(FD_PCH_REE
NTERSA_FOR
CE_RRC_REL
_SWITCH),
UE_CRC_COM
PATIBLE_SWI
TCH
(UE_CRC_CO
MPATIBLE_S
WITCH),
RNC_P2D_DR
D_SWITCH
(RNC_P2D_DR
D_SWITCH),
P2D_SWITCH
(P2D_SWITCH
),
AMR_F2D_OV
ERLAP_CELL
UPT_SWITCH
(AMR_F2D_O
VERLAP_CEL
LUPT_SWITC
H),
SRB_RESET_R
L_SETUP_SWI
TCH
(SRB_RESET_
RL_SETUP_S
WITCH),
RLFAIL_RL_S
ETUP_SWITC
H
(RLFAIL_RL_
SETUP_SWIT
251
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CH),
CS_RL_SETUP
_SWITCH
(CS_RL_SETU
P_SWITCH),
PS_RL_SETUP
_SWITCH
(PS_RL_SETU
P_SWITCH),
UE_SRB_RES
ET_SWITCH
(UE_SRB_RES
ET_SWITCH),
RL_RESTORE
_SWITCH
(RL_RESTORE
_SWITCH),
RNC_EFD_D2
F_SWITCH
(RNC_EFD_D2
F_SWITCH),
RNC_RB_SCRI
_NOT_DROP_
SWITCH
(RNC_RB_SCR
I_NOT_DROP_
SWITCH),
RRC_RECONN
_SWITCH
(RRC_RECON
N_SWITCH),
RRC_REPEAT
_PFM_SWITC
H
(RRC_REPEAT
_PFM_SWITC
H),
F2D_NO_RSP_
RRCREL_SWI
TCH
(F2D_NO_RSP
_RRCREL_SW
ITCH),
CS_SETUP_P2
D_SWITCH
(CS_SETUP_P
2D_SWITCH),
SYSHO_CIPH
252
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
ER_IE_SWITC
H
(SYSHO_CIPH
ER_IE_SWITC
H),
P2P_GTPU_N
OT_CFG_SWI
TCH
(P2P_GTPU_N
OT_CFG_SWI
TCH),
RB_SETUP_CI
PHER_TIME_
ADJ_SWITCH
(RB_SETUP_C
IPHER_TIME_
ADJ_SWITCH)
,
CS_PRI_MOD_
NOT_INT_SWI
TCH
(CS_PRI_MOD
_NOT_INT_S
WITCH),
RAB_SETUP_
TMSI_REALL
OC_BUF_SWI
TCH
(RAB_SETUP_
TMSI_REALL
OC_BUF_SWI
TCH),
IU_FAULT_RE
L_PS_RES_SW
ITCH
(IU_FAULT_R
EL_PS_RES_S
WITCH),
RB_RECFG_R
L_REEST_SWI
TCH
(RB_RECFG_R
L_REEST_SWI
TCH),
F2P_DT_MSG_
BUFFER_SWI
TCH
(F2P_DT_MSG
253
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
_BUFFER_SWI
TCH),
SCRI_COMPA
TIBLE_SWITC
H
(SCRI_COMPA
TIBLE_SWITC
H),
GTPU_ERR_IN
D_DEF_SWIT
CH
(GTPU_ERR_I
ND_DEF_SWI
TCH),
IUR_SRV_CEL
L_CHG_MAC
HS_RESET_S
WITCH
(IUR_SRV_CE
LL_CHG_MAC
HS_RESET_S
WITCH),
UL_INTEG_A
LGO_COMPA
T_SWITCH
(UL_INTEG_A
LGO_COMPA
T_SWITCH)
Unit:None
Actual Value
Range:PAGGIN
G_NUM_CTRL
_SWITCH,
ASU_RL_RES
ET_SWITCH,
MC_RL_RESE
T_SWITCH,
FD_PCH_REE
NTERSA_FOR
CE_RRC_REL
_SWITCH,
UE_CRC_COM
PATIBLE_SWI
TCH,
RNC_P2D_DR
D_SWITCH,
P2D_SWITCH,
254
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
AMR_F2D_OV
ERLAP_CELL
UPT_SWITCH,
SRB_RESET_R
L_SETUP_SWI
TCH,
RLFAIL_RL_S
ETUP_SWITC
H,
CS_RL_SETUP
_SWITCH,
PS_RL_SETUP
_SWITCH,
UE_SRB_RES
ET_SWITCH,
RL_RESTORE
_SWITCH,
RNC_EFD_D2
F_SWITCH,
RNC_RB_SCRI
_NOT_DROP_
SWITCH,
RRC_RECONN
_SWITCH,
RRC_REPEAT
_PFM_SWITC
H,
F2D_NO_RSP_
RRCREL_SWI
TCH,
CS_SETUP_P2
D_SWITCH,
SYSHO_CIPH
ER_IE_SWITC
H,
P2P_GTPU_N
OT_CFG_SWI
TCH,
RB_SETUP_CI
PHER_TIME_
ADJ_SWITCH,
CS_PRI_MOD_
NOT_INT_SWI
TCH,
RAB_SETUP_
TMSI_REALL
OC_BUF_SWI
TCH,
255
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
IU_FAULT_RE
L_PS_RES_SW
ITCH,
RB_RECFG_R
L_REEST_SWI
TCH,
F2P_DT_MSG_
BUFFER_SWI
TCH,
SCRI_COMPA
TIBLE_SWITC
H,
GTPU_ERR_IN
D_DEF_SWIT
CH,
IUR_SRV_CEL
L_CHG_MAC
HS_RESET_S
WITCH,
UL_INTEG_A
LGO_COMPA
T_SWITCH
Default
Value:PAGGIN
G_NUM_CTRL
_SWITCH:
0,ASU_RL_RE
SET_SWITCH:
0,MC_RL_RES
ET_SWITCH:
0,FD_PCH_RE
ENTERSA_FO
RCE_RRC_RE
L_SWITCH:
0,UE_CRC_CO
MPATIBLE_S
WITCH:
0,RNC_P2D_D
RD_SWITCH:
0,P2D_SWITC
H:
0,AMR_F2D_O
VERLAP_CEL
LUPT_SWITC
H:
0,SRB_RESET
_RL_SETUP_S
256
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
WITCH:
0,RLFAIL_RL_
SETUP_SWIT
CH:
0,CS_RL_SET
UP_SWITCH:
0,PS_RL_SET
UP_SWITCH:
0,UE_SRB_RE
SET_SWITCH:
0,RL_RESTOR
E_SWITCH:
0,RNC_EFD_D
2F_SWITCH:
1,RNC_RB_SC
RI_NOT_DRO
P_SWITCH:
0,RRC_RECO
NN_SWITCH:
0,RRC_REPEA
T_PFM_SWIT
CH:
1,F2D_NO_RS
P_RRCREL_S
WITCH:
0,CS_SETUP_P
2D_SWITCH:
0,SYSHO_CIP
HER_IE_SWIT
CH:
0,P2P_GTPU_
NOT_CFG_SW
ITCH:
1,RB_SETUP_
CIPHER_TIME
_ADJ_SWITC
H:
1,CS_PRI_MO
D_NOT_INT_S
WITCH:
0,RAB_SETUP
_TMSI_REALL
OC_BUF_SWI
TCH:
0,IU_FAULT_
REL_PS_RES_
SWITCH:
0,RB_RECFG_
257
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RL_REEST_S
WITCH:
0,F2P_DT_MS
G_BUFFER_S
WITCH:
0,SCRI_COMP
ATIBLE_SWIT
CH:
0,GTPU_ERR_
IND_DEF_SWI
TCH:
0,IUR_SRV_C
ELL_CHG_MA
CHS_RESET_S
WITCH:
1,UL_INTEG_
ALGO_COMP
AT_SWITCH:0
258
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
OptimizationSwitch
BSC6910
SET
URRCTRLSWI
TCH
WRFD-021101
Dynamic
Channel
Configuration
Control (DCCC)
Meaning:1.
PAGGING_NU
M_CTRL_SWI
TCH Maximum
number of
paging attempts
in the RAN
network when
no response is
received after a
paging message
is sent. 1: This
switch is turned
on. The paging
message is sent
for a maximum
of 5 times. 0:
This switch is
turned off. The
paging message
is sent for a
maximum of 10
times. 2.
ASU_RL_RES
ET_SWITCH
(Switch for RL
Reestablishment
During Soft
Handover)
Whether to
trigger radio link
(RL)
reestablishment
during a soft
handover. 1:
This switch is
turned on. A UE
sends a CELL
UPDATE
message to the
RNC and
subsequently the
RNC
reestablishes the
RL for the UE
when both of the
following
conditions are
WRFD-010510
WRFD-010651
WRFD-140103
WRFD-040100
WRFD-010507
WRFD-140226
WRFD-020500
WRFD-010301
WRFD-010615
02
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
HSDPA over Iur
WRFD-010801
Call
Reestablishment
WRFD-010802
Flow Control
WRFD-011402
Rate
Negotiation at
Admission
Control
WRFD-010615
04
Fast Return
from UMTS to
LTE
Enhanced Fast
Dormancy
Paging UE in
Idle,
CELL_PCH,
URA_PCH
State (Type 1)
Combination of
One CS Service
and Two PS
Services
Intra RNC Cell
Update
Inter RNC Cell
Update
Encryption
Combination of
One CS Service
and Three PS
Services
259
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
met: -The RNC
is waiting for the
UE's response to
the ACTIVE
SET UPDATE
message. -The
RNC detects
that downlink
transmission on
signaling radio
bearer (SRB2) is
disconnected or
the NodeB
reports that all
RLs for the UE
are out of
synchronization
. 0: This switch
is turned off.
The RNC does
not reestablish
the RL for the
UE when the
preceding
conditions are
met. 3.
MC_RL_RESE
T_SWITCH
(Switch for RL
Reestablishment
During Meas
Control)
Whether to
trigger RL
reestablishment
during
measurement
control. 1: This
switch is turned
on. A UE sends a
CELL UPDATE
message to the
RNC and
subsequently the
RNC
reestablishes the
RL for the UE
when both of the
260
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
following
conditions are
met: -The RNC
has sent a
MEASUREME
NT CONTROL
message to the
UE. -The RNC
detects that
downlink
transmission on
SRB2 is
disconnected
when the UE
state is stable. 0:
This switch is
turned off. The
RNC does not
reestablish the
RL for the UE
when the
preceding
conditions are
met. 4.
FD_PCH_REE
NTERSA_FOR
CE_RRC_REL
_SWITCH.
Whether to
enable the RNC
to release the
RRC connection
of an EFDcapable UE that
received an
SCRI message
from the PS
domain of the
CN if the UE
sends the RNC a
CELL UPDATE
message after
reentering a
service area.
When this
switch is turned
on, the RNC
releases the
261
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RRC connection
of such a UE in
the preceding
scenario. This
solves the
problem that a
network
becomes
inaccessible
when such a UE
reenters a
service area. 1:
This switch is
turned on. The
RNC directly
releases the
RRC connection
after receiving
the CELL
UPDATE
message from
the Enhanced
Fast Dormancycapable that
leaves and then
reenters the
service area. 0:
This switch is
turned off. The
RNC processes
the CELL
UPDATE
message
received from
the Enhanced
Fast Dormancycapable UE that
leaves and then
reenters the
service area. 5.
UE_CRC_COM
PATIBLE_SWI
TCH. Whether
the RNC
normally
releases
connections
when it detects
262
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
failed cyclic
redundancy
check (CRC) on
RB SETUP
COMPLETE or
RB
RECONFIGUR
ATION
COMPLETE
messages
received from
HSDPA UEs. 1:
This switch is
turned on. The
RNC normally
releases the
connections
when it detects
the failed CRC.
0: This switch is
turned off. The
RNC
abnormally
releases the
connections
when it detects
the failed CRC.
6.
RNC_P2D_DR
D_SWITCH.
Whether the
RNC performs
the directed
retry decision
(DRD) when it
receives a CELL
UPDATE
message with
the cause value
"uplink data
transmission" or
" paging
response"
during UEs'
state transition
from
CELL_PCH or
URA_PCH to
263
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CELL_DCH. 1:
This switch is
turned on. The
RNC performs
the DRD in the
preceding
scenario. 0: This
switch is turned
off. The RNC
does not
perform the
DRD in the
preceding
scenario. 7.
P2D_SWITCH
Whether the
RNC switches a
UE from the
CELL_PCH or
URA_PCH state
to the
CELL_DCH
state when the
following
conditions are
met: The UE
sends the RNC a
CELL UPDATE
message with
the cause value
"uplink data
transmission" or
"paging
response." The
number of UEs
on the FACH
reaches the
upper limit or
the UE is to set
up a CS service
but the common
channel is
congested. 1:
This switch is set
to on. The RNC
switches the UE
from the
CELL_PCH or
264
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
URA_PCH state
to the
CELL_DCH
state in the
preceding
scenario. 0: This
switch is set to
off. The RNC
does not switch
the UE from the
CELL_PCH or
URA_PCH state
to the
CELL_DCH
state in the
preceding
scenario. This
parameter can
be set in both the
"SET
URRCTRLSWI
TCH" and
"ADD
UCELLCONN
ALGOPARA"
commands. The
value of this
parameter in the
"ADD
UCELLCONN
ALGOPARA"
command
prevails. 8.
AMR_F2D_OV
ERLAP_CELL
UPT_SWITCH
Whether the
RNC proceeds
with CS service
setups involving
state transitions
from
CELL_FACH to
CELL_DCH if
the UEs in
question report
cell updates
during the setup
265
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
procedure. 1:
This switch is
turned on. The
RNC first
processes the
CELL UPDATE
message and
then proceeds
with the CS
service setup
procedure. 0:
This switch is
turned off. The
RNC processes
the CELL
UPDATE
message and
does not proceed
with the CS
service setup.
This results in
service setup
failures. 9.
SRB_RESET_R
L_SETUP_SWI
TCH Whether
the RNC
reestablishes a
radio link (RL)
when it detects
an SRB reset
reported on
Layer 2 for
decreasing the
number of UE
call drops 1:
This switch is
turned on. The
RNC
reestablishes an
RL when it
detects the SRB
reset. 0: This
switch is turned
off. The RNC
does not
reestablish an
RL when it
266
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
detects the SRB
reset. 10.
RLFAIL_RL_S
ETUP_SWITC
H Whether
active link reestablishment is
allowed after the
radio link fails 1:
This switch is
turned on.
Active link reestablishment is
allowed after the
RNC receives a
RADIO LINK
FAILURE
INDICATION
message and the
timer used to
wait for a
RADIO LINK
RESTORE
INDICATION
message from
the NodeB
expires. 0: This
switch is turned
off. Active link
re-establishment
is not allowed
after the RNC
receives a
RADIO LINK
FAILURE
INDICATION
message and the
timer used to
wait for a
RADIO LINK
RESTORE
INDICATION
message from
the NodeB
expires. 11.
CS_RL_SETUP
_SWITCH
Whether the
267
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RNC
reestablishes a
radio link (RL)
when SRBs of a
CS service reset
or all its RLs are
out of
synchronization
. 1: This switch
is turned on. The
RNC
reestablishes an
RL in the
preceding
scenario. 0: This
switch is turned
off. The RNC
does not
reestablish an
RL in the
preceding
scenario. 12.
PS_RL_SETUP
_SWITCH
Whether PS
services can
trigger active
link reestablishment 1:
This switch is
turned on. PS
services can
trigger active
link reestablishment.
0: This switch is
turned off. PS
services cannot
trigger active
link reestablishment.
13.
UE_SRB_RES
ET_SWITCH
Whether the
RNC
reestablishes a
radio link (RL)
268
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
when it receives
a CELL
UPDATE
message
carrying SRB
reset
information. 1:
This switch is
turned on. The
RNC does not
release the RRC
connection and
it reestablishes
an RL. 0: This
switch is turned
off. The RNC
releases the
RRC
connection. 14.
RL_RESTORE
_SWITCH
Switch for the
radio link
restoration timer
1: This switch is
turned on. If
there are CS
services and the
last radio link
fails, the RNC
waits for the
radio link to
restore before
the timer T313
expires. 0: This
switch is turned
off. If there are
CS services and
the last radio
link fails, the
RNC waits for
the radio link to
restore before
the original
timer expires.
15.
RNC_EFD_D2
F_SWITCH
269
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
Whether to
enable RNClevel UE state
transition from
CELL_DCH to
CELL_FACH
(D2F) for fast
dormancycapable UEs. 1:
This switch is
turned on. The
D2F state
transition is
enabled for the
fast dormancycapable UEs.. 0:
This switch is
turned off. The
state transition
from
CELL_DCH to
CELL_PCH
(D2P) is enabled
for the fast
dormancycapable UEs 16.
RNC_RB_SCRI
_NOT_DROP_
SWITCH
Whether the RB
release due to
SCRI during RB
reconfiguration
is calculated as a
call drop 1: This
switch is turned
on. The RB
release due to
SCRI during
reconfiguration
is not calculated
as a call drop. 0:
This switch is
turned off. The
RB release due
to SCRI during
reconfiguration
is calculated as a
270
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
call drop. 17.
RRC_RECONN
_SWITCH
Switch for the
RNC to process
the RRC
connection
setup requests
from a UE. 1:
This switch is
turned on. The
RNC releases
the established
RRC connection
when the UE
retransmits RRC
connection
setup requests.
0: This switch is
turned off.
When the UE
retransmits the
RRC connection
setup request to
access the same
cell, the RNC
rejects the new
RRC connection
setup requests.
When the UE
retransmits the
RRC connection
setup request to
access different
cells, the RNC
releases the
established RRC
connection. It is
recommended
that this
parameter be set
to its default
value and the
parameter value
be not changed.
If you need to
change the value
of this
271
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
parameter, ask
for assistance
from Huawei
technical
support
personnel. 18.
RRC_REPEAT
_PFM_SWITC
H Whether the
RNC counts the
number of
retransmitted
RRC connection
setup requests in
the
measurement of
the
RRC.AttConnE
stab.Reg and
RRC.AttConnE
stab.Detac
performance
counters. 1: This
switch is turned
on. The RNC
counts the
number of
retransmitted
RRC connection
setup requests in
the
measurement of
the two
preceding
performance
counters. 0: This
switch is turned
off. The RNC
does not count
the number of
retransmitted
RRC connection
setup requests in
the
measurement of
the two
preceding
performance
272
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
counters. 19.
F2D_NO_RSP_
RRCREL_SWI
TCH Whether
the RNC
releases the
RRC connection
of a UE if the UE
does not respond
to the RNC after
its three failed
attempts at the
state transition
from
CELL_FACH to
CELL_DCH. 1:
This switch is
turned on. The
RRC connection
is released with
the cause "User
Inactive" after
the UE fails in
the state
transition from
CELL_FACH to
CELL_DCH for
three times. The
connection
release is
measured in the
VS.MBMS.RB.
PTP.Loss.Abno
rm counter. 0:
This switch is
turned off. The
RRC connection
is not released
after the UE fails
in the state
transition from
CELL_FACH to
CELL_DCH
three times, and
the UE remains
in the
CELL_FACH
state. 20.
273
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CS_SETUP_P2
D_SWITCH
Whether a UE in
the CELL_PCH
or URA_PCH
state
preferentially
performs a state
transition from
CELL_PCH or
URA_PCH to
CELL_DCH or
CELL_FACH
before initiating
a CS service. 1:
This switch is
turned on. The
RNC first
performs a state
transition from
CELL_PCH or
URA_PCH to
CELL_DCH
and then
initiates the CS
service. 0: This
switch is turned
off. The UE first
performs a state
transition from
CELL_PCH or
URA_PCH to
CELL_FACH
and then
initiates the CS
service. 21.
SYSHO_CIPH
ER_IE_SWITC
H Whether the
relocation
command sent
from a UMTS
network to an
unencrypted
GSM network
carries the
UEA0
encryption
274
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
information
element (IE)
when a UE
complying with
3GPP Release 6
or later is handed
over from the
GSM network to
the UMTS
network. 1: This
switch is turned
on. The
relocation
command does
not carry any
encryption IE. 0:
This switch is
turned off. The
relocation
command
carries the
UEA0
encryption IE.
22.
P2P_GTPU_N
OT_CFG_SWI
TCH Whether to
reconfigure the
GPRS
Tunneling
Protocol User
plane (GTP-U)
when a UE in the
CELL_PCH
state performs a
cell update. 1:
This switch is
turned on. The
GTP-U is not
reconfigured in
the preceding
scenario. 0: This
switch is turned
off. The GTP-U
is reconfigured
in the preceding
scenario. 23.
RB_SETUP_CI
275
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
PHER_TIME_
ADJ_SWITCH
Whether the
RNC adjusts the
activation time
for encryption
parameters
based on an RB
SETUP
COMPLETE
message 1: This
switch is turned
on. The RNC
does not adjust
the activation
time for
encryption
parameters as
long as the
difference
between the
activation times
specified in an
RB SETUP
COMPLETE
message and in
the
corresponding
RB SETUP
message is
smaller than 200
connection
frame numbers
(CFNs). 0: This
switch is turned
off. The RNC
always adjusts
the activation
time for
encryption
parameters
based on an RB
SETUP
COMPLETE
message,
regardless of the
preceding
difference. 24.
276
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CS_PRI_MOD_
NOT_INT_SWI
TCH Whether
the RNC
reinitiates CS
services upon
receiving a RAB
ASSIGNMENT
REQUEST
message in
which only the
CS allocation/
retention
priority (CARP)
is changed. 1:
This switch is
turned on. The
RNC does not
reinitiate CS
services, which
prevents CS call
drops. 0: This
switch is turned
off. The RNC
reinitiates CS
services, which
results in CS call
drops. 25.
RAB_SETUP_
TMSI_REALL
OC_BUF_SWI
TCH Whether
the RNC buffers
a TMSI
REALLOCATI
ON
COMMAND
message
received during
an RAB setup. 1:
This switch is
turned on. The
RNC buffers the
TMSI
REALLOCATI
ON
COMMAND
message
277
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
received during
the RAB setup
and then
forwards the
message to a UE
after the RAB
setup. 0: This
switch is turned
off. The RNC
does not buffer
the TMSI
REALLOCATI
ON
COMMAND
message
received during
the RAB setup.
The RNC
directly
forwards the
message to a
UE. 26.
IU_FAULT_RE
L_PS_RES_SW
ITCH Whether
an UCP
subsystem sends
a PS service
release message
to an Iu-PS
interface board
in case of a
faulty IP path, a
faulty Signaling
Connection
Control Part
(SCCP) link, or
a reset on the Iu
interface 1: This
switch is turned
on. The UCP
subsystem sends
the PS service
release message
to the Iu-PS
interface board.
0: This switch is
turned off. The
278
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
UCP subsystem
does not send
any PS service
release message
to the Iu-PS
interface board.
27.
RB_RECFG_R
L_REEST_SWI
TCH Whether
the RNC
initiates radio
link (RL)
reestablishment
during a radio
bearer (RB)
reconfiguration
when the RNC
detects that a
signaling radio
bearer (SRB) is
reset or all RLs
for a UE are out
of
synchronization
1: This switch is
turned on. The
RNC initiates
RL
reestablishment
during the RB
reconfiguration.
0: This switch is
turned off. The
RNC does not
initiate RL
reestablishment
during the RB
reconfiguration.
28.
F2P_DT_MSG_
BUFFER_SWI
TCH Whether
the RNC buffers
a DIRECT
TRANSFER
message
received from
279
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
the CN and
sends a
PAGING
message after
the RNC
receives a
RADIO
BEARER
RECONFIGUR
ATION
COMPLETE
message from a
UE moving
from the
CELL_FACH to
CELL_PCH
state (F2P for
short) 1: This
switch is turned
on. The RNC
buffers the
DIRECT
TRANSFER
message and
sends the
PAGING
message to the
UE. 0: This
switch is turned
off. The RNC
does not buffer
the DIRECT
TRANSFER
message. 29.
SCRI_COMPA
TIBLE_SWITC
H Whether the
RNC performs
compatibility
processing upon
receiving a
Signalling
Connection
Release
Indication
message with
the cause value
"UE Requested
280
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
PS Data Session
End" when CS
+PS combined
services are
performed. 1:
This switch is
turned on. The
RNC performs
compatibility
processing. It
sends an RB
RELEASE
message
containing the
Signalling
Connection
Release
Indication
information
element (IE) to
instruct a UE to
release the
signaling
connection in
the
corresponding
domain. 0: This
switch is turned
off. The RNC
does not
perform
compatibility
processing and it
discards the
SCRI message.
30.
GTPU_ERR_IN
D_DEF_SWIT
CH Whether the
RNC measures
the number of
call drops when
it receives a
GTPU Error
Indication
message
pertaining to a
UE from the CN
281
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
and releases the
RRC
connection. 1:
This switch is
turned on. The
RNC does not
measure the
number of call
drops in the
preceding
scenario. 0: This
switch is turned
off. The RNC
measures the
number of call
drops when
releasing PS
services. 31.
IUR_SRV_CEL
L_CHG_MAC
HS_RESET_S
WITCH
Whether the
RNC contains
the MAC-hs
reset indicator
information
element (IE) in
the PHYSICAL
CHANNEL
RECONFIGUR
ATION and
RADIO
BEARER
RECONFIGUR
ATION
messages for a
reset of the
MAC-hs entity.
The two
messages are
sent to a UE
when a service
link over the Iur
interface
changes. 1: This
switch is turned
on. The RNC
282
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
contains the
MAC-hs reset
indicator IE in
the two
preceding
messages. 0:
This switch is
turned off. The
RNC does not
contain the
MAC-hs reset
indicator IE in
the two
preceding
messages. 32.
UL_INTEG_A
LGO_COMPA
T_SWITCH(UL
Integrity
Compatibility
Optimization
Switch)
Whether the
RNC performs
integrity check
on uplink RRC
messages that do
not contain
integrity
protection
information
after the security
mode is started.
1: This switch is
turned on. When
this switch is set
to on, the RNC
does not
perform
integrity check
on three
messages that do
not contain
integrity
protection
information and
are subsequent
to the security
283
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
mode complete
message. If
other messages
do not contain
integrity
protection
information, the
RNC determines
that these
messages fail
the integrity
check. If a
message
contains
integrity
protection
information but
its subsequent
messages do not,
the RNC
determines that
the subsequent
messages fail
the integrity
check. 0: This
switch is turned
off. When this
switch is set to
off, the RNC
determines that
the messages
subsequent to
the security
mode complete
message fail the
integrity check
if these
messages do not
contain integrity
protection
information.
GUI Value
Range:PAGGIN
G_NUM_CTRL
_SWITCH
(PAGGING_N
UM_CTRL_S
284
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
WITCH),
ASU_RL_RES
ET_SWITCH
(ASU_RL_RES
ET_SWITCH),
MC_RL_RESE
T_SWITCH
(MC_RL_RESE
T_SWITCH),
FD_PCH_REE
NTERSA_FOR
CE_RRC_REL
_SWITCH
(FD_PCH_REE
NTERSA_FOR
CE_RRC_REL
_SWITCH),
UE_CRC_COM
PATIBLE_SWI
TCH
(UE_CRC_CO
MPATIBLE_S
WITCH),
RNC_P2D_DR
D_SWITCH
(RNC_P2D_DR
D_SWITCH),
P2D_SWITCH
(P2D_SWITCH
),
AMR_F2D_OV
ERLAP_CELL
UPT_SWITCH
(AMR_F2D_O
VERLAP_CEL
LUPT_SWITC
H),
SRB_RESET_R
L_SETUP_SWI
TCH
(SRB_RESET_
RL_SETUP_S
WITCH),
RLFAIL_RL_S
ETUP_SWITC
H
(RLFAIL_RL_
SETUP_SWIT
285
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
CH),
CS_RL_SETUP
_SWITCH
(CS_RL_SETU
P_SWITCH),
PS_RL_SETUP
_SWITCH
(PS_RL_SETU
P_SWITCH),
UE_SRB_RES
ET_SWITCH
(UE_SRB_RES
ET_SWITCH),
RL_RESTORE
_SWITCH
(RL_RESTORE
_SWITCH),
RNC_EFD_D2
F_SWITCH
(RNC_EFD_D2
F_SWITCH),
RNC_RB_SCRI
_NOT_DROP_
SWITCH
(RNC_RB_SCR
I_NOT_DROP_
SWITCH),
RRC_RECONN
_SWITCH
(RRC_RECON
N_SWITCH),
RRC_REPEAT
_PFM_SWITC
H
(RRC_REPEAT
_PFM_SWITC
H),
F2D_NO_RSP_
RRCREL_SWI
TCH
(F2D_NO_RSP
_RRCREL_SW
ITCH),
CS_SETUP_P2
D_SWITCH
(CS_SETUP_P
2D_SWITCH),
SYSHO_CIPH
286
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
ER_IE_SWITC
H
(SYSHO_CIPH
ER_IE_SWITC
H),
P2P_GTPU_N
OT_CFG_SWI
TCH
(P2P_GTPU_N
OT_CFG_SWI
TCH),
RB_SETUP_CI
PHER_TIME_
ADJ_SWITCH
(RB_SETUP_C
IPHER_TIME_
ADJ_SWITCH)
,
CS_PRI_MOD_
NOT_INT_SWI
TCH
(CS_PRI_MOD
_NOT_INT_S
WITCH),
RAB_SETUP_
TMSI_REALL
OC_BUF_SWI
TCH
(RAB_SETUP_
TMSI_REALL
OC_BUF_SWI
TCH),
IU_FAULT_RE
L_PS_RES_SW
ITCH
(IU_FAULT_R
EL_PS_RES_S
WITCH),
RB_RECFG_R
L_REEST_SWI
TCH
(RB_RECFG_R
L_REEST_SWI
TCH),
F2P_DT_MSG_
BUFFER_SWI
TCH
(F2P_DT_MSG
287
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
_BUFFER_SWI
TCH),
SCRI_COMPA
TIBLE_SWITC
H
(SCRI_COMPA
TIBLE_SWITC
H),
GTPU_ERR_IN
D_DEF_SWIT
CH
(GTPU_ERR_I
ND_DEF_SWI
TCH),
IUR_SRV_CEL
L_CHG_MAC
HS_RESET_S
WITCH
(IUR_SRV_CE
LL_CHG_MAC
HS_RESET_S
WITCH),
UL_INTEG_A
LGO_COMPA
T_SWITCH
(UL_INTEG_A
LGO_COMPA
T_SWITCH)
Unit:None
Actual Value
Range:PAGGIN
G_NUM_CTRL
_SWITCH,
ASU_RL_RES
ET_SWITCH,
MC_RL_RESE
T_SWITCH,
FD_PCH_REE
NTERSA_FOR
CE_RRC_REL
_SWITCH,
UE_CRC_COM
PATIBLE_SWI
TCH,
RNC_P2D_DR
D_SWITCH,
P2D_SWITCH,
288
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
AMR_F2D_OV
ERLAP_CELL
UPT_SWITCH,
SRB_RESET_R
L_SETUP_SWI
TCH,
RLFAIL_RL_S
ETUP_SWITC
H,
CS_RL_SETUP
_SWITCH,
PS_RL_SETUP
_SWITCH,
UE_SRB_RES
ET_SWITCH,
RL_RESTORE
_SWITCH,
RNC_EFD_D2
F_SWITCH,
RNC_RB_SCRI
_NOT_DROP_
SWITCH,
RRC_RECONN
_SWITCH,
RRC_REPEAT
_PFM_SWITC
H,
F2D_NO_RSP_
RRCREL_SWI
TCH,
CS_SETUP_P2
D_SWITCH,
SYSHO_CIPH
ER_IE_SWITC
H,
P2P_GTPU_N
OT_CFG_SWI
TCH,
RB_SETUP_CI
PHER_TIME_
ADJ_SWITCH,
CS_PRI_MOD_
NOT_INT_SWI
TCH,
RAB_SETUP_
TMSI_REALL
OC_BUF_SWI
TCH,
289
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
IU_FAULT_RE
L_PS_RES_SW
ITCH,
RB_RECFG_R
L_REEST_SWI
TCH,
F2P_DT_MSG_
BUFFER_SWI
TCH,
SCRI_COMPA
TIBLE_SWITC
H,
GTPU_ERR_IN
D_DEF_SWIT
CH,
IUR_SRV_CEL
L_CHG_MAC
HS_RESET_S
WITCH,
UL_INTEG_A
LGO_COMPA
T_SWITCH
Default
Value:PAGGIN
G_NUM_CTRL
_SWITCH:
0,ASU_RL_RE
SET_SWITCH:
0,MC_RL_RES
ET_SWITCH:
0,FD_PCH_RE
ENTERSA_FO
RCE_RRC_RE
L_SWITCH:
0,UE_CRC_CO
MPATIBLE_S
WITCH:
0,RNC_P2D_D
RD_SWITCH:
0,P2D_SWITC
H:
0,AMR_F2D_O
VERLAP_CEL
LUPT_SWITC
H:
0,SRB_RESET
_RL_SETUP_S
290
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
WITCH:
0,RLFAIL_RL_
SETUP_SWIT
CH:
0,CS_RL_SET
UP_SWITCH:
0,PS_RL_SET
UP_SWITCH:
0,UE_SRB_RE
SET_SWITCH:
0,RL_RESTOR
E_SWITCH:
0,RNC_EFD_D
2F_SWITCH:
1,RNC_RB_SC
RI_NOT_DRO
P_SWITCH:
0,RRC_RECO
NN_SWITCH:
0,RRC_REPEA
T_PFM_SWIT
CH:
1,F2D_NO_RS
P_RRCREL_S
WITCH:
0,CS_SETUP_P
2D_SWITCH:
0,SYSHO_CIP
HER_IE_SWIT
CH:
0,P2P_GTPU_
NOT_CFG_SW
ITCH:
1,RB_SETUP_
CIPHER_TIME
_ADJ_SWITC
H:
1,CS_PRI_MO
D_NOT_INT_S
WITCH:
0,RAB_SETUP
_TMSI_REALL
OC_BUF_SWI
TCH:
0,IU_FAULT_
REL_PS_RES_
SWITCH:
0,RB_RECFG_
291
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
RL_REEST_S
WITCH:
0,F2P_DT_MS
G_BUFFER_S
WITCH:
0,SCRI_COMP
ATIBLE_SWIT
CH:
0,GTPU_ERR_
IND_DEF_SWI
TCH:
0,IUR_SRV_C
ELL_CHG_MA
CHS_RESET_S
WITCH:
1,UL_INTEG_
ALGO_COMP
AT_SWITCH:0
292
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
T381
BSC6900
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:T381
is started after
the RNC send
message "RRC
CONNECTION
SETUP"(or
"CELL
UPDATE
CONFIRM"). If
T381 expire and
RNC does not
receive "RRC
CONNECTION
SETUP
COMPLETE"(o
r the response of
"CELL
UPDATE
CONFIRM")
and V381 is
smaller than
N381, RNC
resend "RRC
CONNECTION
SETUP"(or
"CELL
UPDATE
CONFIRM")
and restart timer
T381 and
increase V381.
If RNC receive
"RRC
CONNECTION
SETUP
COMPLETE"(o
r the response of
"CELL
UPDATE
CONFIRM"),
T381 will be
stopped. Default
value is 600ms.
WRFD-040100
Flow Control
GUI Value
Range:D0,
D100, D200,
D300, D400,
293
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
D500, D600,
D700, D800,
D900, D1000,
D1200, D1500,
D2000
Unit:ms
Actual Value
Range:0, 100,
200, 300, 400,
500, 600, 700,
800, 900, 1000,
1200, 1500,
2000
Default
Value:D600
294
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
T381
BSC6910
SET
UCONNMODE
TIMER
WRFD-010101
3GPP R9
Specifications
Meaning:T381
is started after
the RNC send
message "RRC
CONNECTION
SETUP"(or
"CELL
UPDATE
CONFIRM"). If
T381 expire and
RNC does not
receive "RRC
CONNECTION
SETUP
COMPLETE"(o
r the response of
"CELL
UPDATE
CONFIRM")
and V381 is
smaller than
N381, RNC
resend "RRC
CONNECTION
SETUP"(or
"CELL
UPDATE
CONFIRM")
and restart timer
T381 and
increase V381.
If RNC receive
"RRC
CONNECTION
SETUP
COMPLETE"(o
r the response of
"CELL
UPDATE
CONFIRM"),
T381 will be
stopped. Default
value is 600ms.
WRFD-040100
Flow Control
GUI Value
Range:D0,
D100, D200,
D300, D400,
295
WCDMA RAN
URA-Cell Update Feature Parameter Description
Parameter ID
NE
MML
Command
5 Parameters
Feature ID
Feature Name
Description
D500, D600,
D700, D800,
D900, D1000,
D1200, D1500,
D2000
Unit:ms
Actual Value
Range:0, 100,
200, 300, 400,
500, 600, 700,
800, 900, 1000,
1200, 1500,
2000
Default
Value:D600
MaxFachPower
BSC6900
ADD UFACH
MOD UFACH
WRFD-020501
Open Loop
Power Control
Meaning:The
offset between
the FACH
transmit power
and P-CPICH
transmit power
in a cell. For
detailed
information of
this parameter,
see 3GPP TS
25.433.
GUI Value
Range:-350~15
0
Unit:0.1dB
Actual Value
Range:-35~15
Default Value:
10
296
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
MaxFachPower
BSC6910
ADD UFACH
WRFD-020501
Open Loop
Power Control
Meaning:The
offset between
the FACH
transmit power
and P-CPICH
transmit power
in a cell. For
detailed
information of
this parameter,
see 3GPP TS
25.433.
MOD UFACH
GUI Value
Range:-350~15
0
Unit:0.1dB
Actual Value
Range:-35~15
Default Value:
10
297
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
OffsetFACHPo
wer
BSC6900
ADD UFACH
WRFD-010510
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
MOD UFACH
GUI Value
Range:0~255
Unit:0.1dB
Actual Value
Range:0~25.5
Default Value:0
298
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
OffsetFACHPo
wer
BSC6910
ADD UFACH
WRFD-010510
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
MOD UFACH
GUI Value
Range:0~255
Unit:0.1dB
Actual Value
Range:0~25.5
Default Value:0
299
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
DlOlcTrigThd
BSC6900
ADD
UCELLLDM
WRFD-020102
Load
Measurement
Meaning:Thresh
old for
triggering
downlink OLC.
If the ratio of the
downlink load to
the downlink
capacity is
higher than or
equal to this
threshold for a
duration longer
than that
specified by the
"DlLdTrnsHysT
ime" parameter,
downlink OLC
(overload state)
is triggered and
OLC actions are
performed to
reduce the cell
load. The
recommended
value difference
between
"DlOlcRelThd"
and
"DlOlcTrigThd"
is higher than
10% because the
load fluctuates.
Otherwise, a cell
frequently
enters and
leaves the
overload state.
MOD
UCELLLDM
WRFD-020107
Overload
Control
GUI Value
Range:0~100
Unit:%
Actual Value
Range:0~100
Default Value:
95
300
WCDMA RAN
URA-Cell Update Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
DlOlcTrigThd
BSC6910
ADD
UCELLLDM
WRFD-020102
Load
Measurement
Meaning:Thresh
old for
triggering
downlink OLC.
If the ratio of the
downlink load to
the downlink
capacity is
higher than or
equal to this
threshold for a
duration longer
than that
specified by the
"DlLdTrnsHysT
ime" parameter,
downlink OLC
(overload state)
is triggered and
OLC actions are
performed to
reduce the cell
load. The
recommended
value difference
between
"DlOlcRelThd"
and
"DlOlcTrigThd"
is higher than
10% because the
load fluctuates.
Otherwise, a cell
frequently
enters and
leaves the
overload state.
MOD
UCELLLDM
WRFD-020107
Overload
Control
GUI Value
Range:0~100
Unit:%
Actual Value
Range:0~100
Default Value:
95
301
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counters
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67179057
VS.AttCommTr
ChResIur.Tx
Number of
Common
Transport
Channel
Resource
Requests Sent
by SRNC on Iur
Interface
BSC6900
WRFD-010802
67179058
VS.SuccComm
TrChResIur.Rx
Number of
Common
Transport
Channel
Resource
Responses
Received by
SRNC on Iur
Interface
BSC6900
WRFD-010802
67179059
VS.FailCommT
rChResIur.NotS
upp.Rx
Number of
Common
Transport
Channel
Resource
Failures Due to
Transport
Resource
Unavailable on
Iur Interface for
SRNC
BSC6900
WRFD-010802
302
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67179060
VS.AttRelCom
mTrChResIur.T
x
Number of
Common
Transport
Channel
Resource
Release
Requests on Iur
Interface from
SRNC
BSC6900
WRFD-010802
67179119
VS.IUR.AttCo
mTraChResDR
NC
Number of
Common
Transport
Channel
Resource
Requests on Iur
Interface for
DRNC
BSC6900
WRFD-010802
67179120
VS.IUR.SuccCo
mTraChResDR
NC
Number of
Common
Transport
Channel
Resource
Responses on
Iur Interface for
DRNC
BSC6900
WRFD-010802
67179121
VS.IUR.FailCT
CRDRNC.NotS
upp
Number of
Common
Transport
Channel
Resource
Failures Due to
Transport
Resource
Unavailable on
Iur Interface for
DRNC
BSC6900
WRFD-010802
67179122
VS.IUR.AttRelCoTrChResDR
NC
Number of
Common
Transport
Channel
Resource
Release
Requests on Iur
Interface for
DRNC
BSC6900
WRFD-010802
303
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67180370
VS.CellUpdt.Co
nfirm
Number of
CELL UPDATE
CONFIRM
Messages from
SRNC for Cell
BSC6900
WRFD-010801
Number of
Successful Cell
Updates for Cell
BSC6900
Number of
Periodical Cell
Updates for Cell
BSC6900
Number of Cell
Updates Due to
Cell Reselection
for Cell
BSC6900
Number of Cell
Updates Due to
Re-Entering
Service Area for
Cell
BSC6900
Number of Cell
Updates Due to
Paging
Response for
Cell
BSC6900
Number of Cell
Updates Due to
Uplink Data
Transmission
for Cell
BSC6900
Number of Cell
Updates Due to
Radio Link
Failure for Cell
BSC6900
Number of
Successful
Periodical Cell
Updates for Cell
BSC6900
67180371
67180372
67180373
67180374
67180375
67180376
67180378
67180379
VS.SuccCellUp
dt
VS.AttCellUpdt
.Prd
VS.AttCellUpdt
.Resel
VS.AttCellUpdt
.RSA
VS.AttCellUpdt
.PageRsp
VS.AttCellUpdt
.ULDataTrans
VS.AttCellUpdt
.RLFail
VS.SuccCellUp
dt.Prd
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
304
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67180380
VS.SuccCellUp
dt.Resel
Number of
Successful Cell
Updates Due to
Cell Reselection
for Cell
BSC6900
WRFD-010801
Number of
Successful Cell
Updates Due to
Re-Entering
Service Area for
Cell
BSC6900
Number of
Successful Cell
Updates Due to
Paging
Response for
Cell
BSC6900
Number of
Successful Cell
Updates Due to
Uplink Data
Transmission
for Cell
BSC6900
Number of RRC
Connection
Releases Due to
Cell Update
Failure for Cell
BSC6900
Number of RRC
Connection
Releases due to
Cell Update
Failure in the
Case of RL
Failure for Cell
BSC6900
67180381
67180382
67180383
67180386
67180387
VS.SuccCellUp
dt.Rsa
VS.SuccCellUp
dt.PageRsp
VS.SuccCellUp
dt.ULDataTrans
VS.CellUpdt.R
RCRel
VS.RRC.ConnR
el.CellUpd
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010510
WRFD-010510
WRFD-010801
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Intra RNC Cell
Update
305
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67180451
VS.AttURAUp
d.Chg
Number of URA
Updates Due to
Change of URA
for Cell
BSC6900
WRFD-010202
UE State in
Connected
Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
WRFD-010901
WRFD-010902
VS.AttURAUp
d.Prd
Number of URA
Updates Due to
Periodic URA
Update for Cell
BSC6900
WRFD-010202
WRFD-010901
WRFD-010902
UE State in
Connected
Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
Intra RNC URA
Update
Inter RNC URA
Update
67180453
VS.SuccURAU
pd.Chg
Number of
Successful URA
Updates Due to
Change of URA
for Cell
BSC6900
WRFD-010901
WRFD-010902
WRFD-010202
306
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67180454
VS.SuccURAU
pd.Prd
Number of
Successful URA
Updates Due to
Periodic URA
Update for Cell
BSC6900
WRFD-010901
Number of
Successful Cell
Updates Due to
Radio Link
Failure for Cell
BSC6900
VS.FailCellUpd
t.RLFail.NoRep
ly
Number of
Failed Cell
Updates Due to
No Response
from UE for Cell
(Cell Update
Caused by RL
Failure)
BSC6900
VS.AttCellUpdt
Number of Cell
Updates for Cell
BSC6900
67189767
67189768
67192569
VS.SuccCellUp
dt.RLFail
WRFD-010902
WRFD-010202
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
67192570
67192571
VS.AttCellUpdt
.ErrSRB
VS.AttCellUpdt
.ErrTRB
Number of Cell
Updates Due to
SRB RLC
Unrecoverable
Error for Cell
BSC6900
Number of Cell
Updates Due to
TRB RLC
Unrecoverable
Error for Cell
BSC6900
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
307
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67192572
VS.SuccCellUp
dt.ErrTRB
Number of
Successful Cell
Updates Due to
TRB RLC
Unrecoverable
Error for Cell
BSC6900
WRFD-010801
Number of Cell
Updates Due to
MBMS
Reception for
Cell
BSC6900
Number of
Successful Cell
Updates Due to
MBMS
Reception for
Cell
BSC6900
Number of Cell
Updates Due to
MBMS PtP RB
Request for Cell
BSC6900
67192573
67192574
67192575
VS.AttCellUpdt
.MbmsRecv
VS.SuccCellUp
dt.MbmsRecv
VS.AttCellUpdt
.MbmsPtpRbRe
q
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010616
WRFD-010801
WRFD-010802
WRFD-010616
WRFD-010801
WRFD-010802
WRFD-010616
67192576
73423781
VS.SuccCellUp
dt.MbmsPtpRb
Req
VS.SuccCellUp
dt.ErrSRB
Number of
Successful Cell
Updates Due to
MBMS PtP RB
Request for Cell
BSC6900
Number of
Successful Cell
Updates Due to
SRB RLC
Unrecoverable
Error for Cell
BSC6900
WRFD-010801
WRFD-010802
WRFD-010616
WRFD-010801
WRFD-010802
308
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73424125
VS.FailCellUpd
t.ErrSRB.NoRe
ply.FACH
Number of Cell
Update Failures
due to No
Response from
UEs in the
CELL_FACH
State (SRB RLC
ERROR) for
Cell
BSC6900
WRFD-010801
VS.FailCellUpd
t.ErrTRB.NoRe
ply.FACH
Number of Cell
Update Failures
due to No
Response from
UEs in the
CELL_FACH
State (TRB RLC
ERROR)for
Cell
BSC6900
VS.AttCellUpdt
.OrgConvCall.P
CH
Number of Cell
Update
Attempts for
Cell
(Originating
Conversational
Call)
BSC6900
VS.AttCellUpdt
.TmConvCall.P
CH
Number of Cell
Update
Attempts for
Cell
(Terminating
Conversational
Call)
BSC6900
VS.AttCellUpdt
.EmgCall.PCH
Number of Cell
Update
Attempts for
Cell
(Emergency
Call)
BSC6900
Number of
Successful Cell
Updates for Cell
(Originating
Conversational
Call)
BSC6900
73424126
73426327
73426328
73426329
73426330
VS.SuccCellUp
dt.OrgConvCall
.PCH
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
309
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426331
VS.SuccCellUp
dt.TmConvCall.
PCH
Number of
Successful Cell
Updates for Cell
(Terminating
Conversational
Call)
BSC6900
WRFD-010801
VS.SuccCellUp
dt.EmgCall.PC
H
Number of
Successful Cell
Updates for Cell
(Emergency
Call)
BSC6900
VS.AttCellUpdt
.OrgStrCall.PC
H
Number of Cell
Update
Attempts for
Cell
(Originating
Streaming Call)
BSC6900
VS.AttCellUpdt
.OrgInterCall.P
CH
Number of Cell
Update
Attempts for
Cell
(Originating
Interactive Call)
BSC6900
VS.AttCellUpdt
.OrgBkgCall.PC
H
Number of Cell
Update
Attempts for
Cell
(Originating
Background
Call)
BSC6900
VS.AttCellUpdt
.OrgSubCall.PC
H
Number of Cell
Update
Attempts for
Cell
(Originating
Subscribed
traffic Call)
BSC6900
VS.AttCellUpdt
.OrgHhPrSig.P
CH
Number of Cell
Update
Attempts for
Cell
(Originating
High Priority
Signalling)
BSC6900
73426332
73426812
73426813
73426814
73426815
73426816
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
310
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426817
VS.AttCellUpdt
.OrgLwPrSig.P
CH
Number of Cell
Update
Attempts for
Cell
(Originating
Low Priority
Signalling)
BSC6900
WRFD-010801
VS.AttCellUpdt
.TmStrCall.PC
H
Number of Cell
Update
Attempts for
Cell
(Terminating
Streaming Call)
BSC6900
VS.AttCellUpdt
.TmInterCall.P
CH
Number of Cell
Update
Attempts for
Cell
(Terminating
Interactive Call)
BSC6900
VS.AttCellUpdt
.TmBkgCall.PC
H
Number of Cell
Update
Attempts for
Cell
(Terminating
Background
Call)
BSC6900
VS.AttCellUpdt
.TmHhPrSig.PC
H
Number of Cell
Update
Attempts for
Cell
(Terminating
High Priority
Signalling)
BSC6900
VS.AttCellUpdt
.TmLwPrSig.P
CH
Number of Cell
Update
Attempts for
Cell
(Terminating
Low Priority
Signalling)
BSC6900
73426818
73426819
73426820
73426821
73426822
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
311
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426823
VS.AttCellUpdt
.Unknown.PCH
Number of Cell
Update
Attempts for
Cell
(Terminating cause unknown)
BSC6900
WRFD-010801
Number of Cell
Update
Attempts for
Cell
(Registration)
BSC6900
Number of Cell
Update
Attempts for
Cell (Detach)
BSC6900
Number of Cell
Update
Attempts for
Cell (Other)
BSC6900
VS.SuccCellUp
dt.OrgStrCall.P
CH
Number of
Successful Cell
Updates for Cell
(Originating
Streaming Call)
BSC6900
VS.SuccCellUp
dt.OrgInterCall.
PCH
Number of
Successful Cell
Updates for Cell
(Originating
Interactive Call)
BSC6900
VS.SuccCellUp
dt.OrgBkgCall.
PCH
Number of
Successful Cell
Updates for Cell
(Originating
Background
Call)
BSC6900
VS.SuccCellUp
dt.OrgSubCall.P
CH
Number of
Successful Cell
Updates for Cell
(Originating
Subscribed
traffic Call)
BSC6900
73426824
73426825
73426826
73426827
73426828
73426829
73426830
VS.AttCellUpdt
.Reg.PCH
VS.AttCellUpdt
.Detach.PCH
VS.AttCellUpdt
.Other.PCH
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
312
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426831
VS.SuccCellUp
dt.OrgHhPrSig.
PCH
Number of
Successful Cell
Updates for Cell
(Originating
High Priority
Signalling)
BSC6900
WRFD-010801
VS.SuccCellUp
dt.OrgLwPrSig.
PCH
Number of
Successful Cell
Updates for Cell
(Originating
Low Priority
Signalling)
BSC6900
VS.SuccCellUp
dt.TmStrCall.P
CH
Number of
Successful Cell
Updates for Cell
(Terminating
Streaming Call)
BSC6900
VS.SuccCellUp
dt.TmInterCall.
PCH
Number of
Successful Cell
Updates for Cell
(Terminating
Interactive Call)
BSC6900
VS.SuccCellUp
dt.TmBkgCall.P
CH
Number of
Successful Cell
Updates for Cell
(Terminating
Background
Call)
BSC6900
VS.SuccCellUp
dt.TmHhPrSig.
PCH
Number of
Successful Cell
Updates for Cell
(Terminating
High Priority
Signalling)
BSC6900
VS.SuccCellUp
dt.TmLwPrSig.
PCH
Number of
Successful Cell
Updates for Cell
(Terminating
Low Priority
Signalling)
BSC6900
73426832
73426833
73426834
73426835
73426836
73426837
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
313
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426838
VS.SuccCellUp
dt.Unknown.PC
H
Number of
Successful Cell
Updates for Cell
(Terminating cause unknown)
BSC6900
WRFD-010801
VS.SuccCellUp
dt.Reg.PCH
Number of
Successful Cell
Updates for Cell
(Registration)
BSC6900
Number of
Successful Cell
Updates for Cell
(Detach)
BSC6900
Number of
Successful Cell
Updates for Cell
(Other)
BSC6900
VS.CellUpdt.Co
nfirm.PageAnd
UlData.PCH
Number of
CELL UPDATE
CONFIRM
Messages Sent
by the RNC for
Cell (for the
CELL UPDATE
Messages with
the Cause Value
"uplink data
transmission" or
"paging
response")
BSC6900
VS.RRC.AttCo
nnEstab.CellUp
d.DSCR.CS
Number of CS
RRC
Connection
Setup Requests
in the DSCR
Procedure
Triggered by
Process
Overlapping for
Cell
BSC6900
73426839
73426840
73426841
73426843
73427913
VS.SuccCellUp
dt.Detach.PCH
VS.SuccCellUp
dt.Other.PCH
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010510
WRFD-010801
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Intra RNC Cell
Update
314
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73427914
VS.RRC.AttCo
nnEstab.CellUp
d.DSCR.PS
Number of PS
RRC
Connection
Setup Requests
in the DSCR
Procedure
Triggered by
Process
Overlapping for
Cell
BSC6900
WRFD-010510
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Number of RRC
Connection
Setup Requests
in the DSCR
Procedure
Triggered by
Process
Overlapping for
Cell (Others)
BSC6900
Number of RRC
Connection
Setup Requests
in the DSCR
Procedure
Triggered by
Process
Overlapping for
Cell (Service)
BSC6900
73427915
73427916
VS.RRC.AttCo
nnEstab.CellUp
d.DSCR.Other
VS.RRC.AttCo
nnEstab.CellUp
d.DSCR.Service
WRFD-010801
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Intra RNC Cell
Update
WRFD-010510
WRFD-010801
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Intra RNC Cell
Update
73428051
VS.Cell.Updt.E
cNo.0
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 0 for
Cell
BSC6900
WRFD-010801
73428052
VS.Cell.Updt.E
cNo.1
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 1 for
Cell
BSC6900
WRFD-010801
315
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73428053
VS.Cell.Updt.E
cNo.2
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 2 for
Cell
BSC6900
WRFD-010801
73428054
VS.Cell.Updt.E
cNo.3
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 3 for
Cell
BSC6900
WRFD-010801
73428055
VS.Cell.Updt.E
cNo.4
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 4 for
Cell
BSC6900
WRFD-010801
73428056
VS.Cell.Updt.E
cNo.5
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 5 for
Cell
BSC6900
WRFD-010801
73428057
VS.Cell.Updt.E
cNo.6
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 6 for
Cell
BSC6900
WRFD-010801
73428058
VS.Cell.Updt.E
cNo.7
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 7 for
Cell
BSC6900
WRFD-010801
316
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73428059
VS.Cell.Updt.E
cNo.8
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 8 for
Cell
BSC6900
WRFD-010801
67179057
VS.AttCommTr
ChResIur.Tx
Number of
Common
Transport
Channel
Resource
Requests Sent
by SRNC on Iur
Interface
BSC6910
WRFD-010802
67179058
VS.SuccComm
TrChResIur.Rx
Number of
Common
Transport
Channel
Resource
Responses
Received by
SRNC on Iur
Interface
BSC6910
WRFD-010802
67179059
VS.FailCommT
rChResIur.NotS
upp.Rx
Number of
Common
Transport
Channel
Resource
Failures Due to
Transport
Resource
Unavailable on
Iur Interface for
SRNC
BSC6910
WRFD-010802
67179060
VS.AttRelCom
mTrChResIur.T
x
Number of
Common
Transport
Channel
Resource
Release
Requests on Iur
Interface from
SRNC
BSC6910
WRFD-010802
317
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67179119
VS.IUR.AttCo
mTraChResDR
NC
Number of
Common
Transport
Channel
Resource
Requests on Iur
Interface for
DRNC
BSC6910
WRFD-010802
67179120
VS.IUR.SuccCo
mTraChResDR
NC
Number of
Common
Transport
Channel
Resource
Responses on
Iur Interface for
DRNC
BSC6910
WRFD-010802
67179121
VS.IUR.FailCT
CRDRNC.NotS
upp
Number of
Common
Transport
Channel
Resource
Failures Due to
Transport
Resource
Unavailable on
Iur Interface for
DRNC
BSC6910
WRFD-010802
67179122
VS.IUR.AttRelCoTrChResDR
NC
Number of
Common
Transport
Channel
Resource
Release
Requests on Iur
Interface for
DRNC
BSC6910
WRFD-010802
67180370
VS.CellUpdt.Co
nfirm
Number of
CELL UPDATE
CONFIRM
Messages from
SRNC for Cell
BSC6910
WRFD-010801
WRFD-010802
318
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67180371
VS.SuccCellUp
dt
Number of
Successful Cell
Updates for Cell
BSC6910
WRFD-010801
Number of
Periodical Cell
Updates for Cell
BSC6910
Number of Cell
Updates Due to
Cell Reselection
for Cell
BSC6910
Number of Cell
Updates Due to
Re-Entering
Service Area for
Cell
BSC6910
Number of Cell
Updates Due to
Paging
Response for
Cell
BSC6910
Number of Cell
Updates Due to
Uplink Data
Transmission
for Cell
BSC6910
Number of Cell
Updates Due to
Radio Link
Failure for Cell
BSC6910
Number of
Successful
Periodical Cell
Updates for Cell
BSC6910
Number of
Successful Cell
Updates Due to
Cell Reselection
for Cell
BSC6910
67180372
67180373
67180374
67180375
67180376
67180378
67180379
67180380
VS.AttCellUpdt
.Prd
VS.AttCellUpdt
.Resel
VS.AttCellUpdt
.RSA
VS.AttCellUpdt
.PageRsp
VS.AttCellUpdt
.ULDataTrans
VS.AttCellUpdt
.RLFail
VS.SuccCellUp
dt.Prd
VS.SuccCellUp
dt.Resel
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
319
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67180381
VS.SuccCellUp
dt.Rsa
Number of
Successful Cell
Updates Due to
Re-Entering
Service Area for
Cell
BSC6910
WRFD-010801
Number of
Successful Cell
Updates Due to
Paging
Response for
Cell
BSC6910
Number of
Successful Cell
Updates Due to
Uplink Data
Transmission
for Cell
BSC6910
Number of RRC
Connection
Releases Due to
Cell Update
Failure for Cell
BSC6910
Number of RRC
Connection
Releases due to
Cell Update
Failure in the
Case of RL
Failure for Cell
BSC6910
67180382
67180383
67180386
67180387
VS.SuccCellUp
dt.PageRsp
VS.SuccCellUp
dt.ULDataTrans
VS.CellUpdt.R
RCRel
VS.RRC.ConnR
el.CellUpd
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010510
WRFD-010510
WRFD-010801
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Intra RNC Cell
Update
320
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67180451
VS.AttURAUp
d.Chg
Number of URA
Updates Due to
Change of URA
for Cell
BSC6910
WRFD-010202
UE State in
Connected
Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
WRFD-010901
WRFD-010902
VS.AttURAUp
d.Prd
Number of URA
Updates Due to
Periodic URA
Update for Cell
BSC6910
WRFD-010202
WRFD-010901
WRFD-010902
UE State in
Connected
Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
Intra RNC URA
Update
Inter RNC URA
Update
67180453
VS.SuccURAU
pd.Chg
Number of
Successful URA
Updates Due to
Change of URA
for Cell
BSC6910
WRFD-010901
WRFD-010902
WRFD-010202
321
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67180454
VS.SuccURAU
pd.Prd
Number of
Successful URA
Updates Due to
Periodic URA
Update for Cell
BSC6910
WRFD-010901
Number of
Successful Cell
Updates Due to
Radio Link
Failure for Cell
BSC6910
VS.FailCellUpd
t.RLFail.NoRep
ly
Number of
Failed Cell
Updates Due to
No Response
from UE for Cell
(Cell Update
Caused by RL
Failure)
BSC6910
VS.AttCellUpdt
Number of Cell
Updates for Cell
BSC6910
67189767
67189768
67192569
VS.SuccCellUp
dt.RLFail
WRFD-010902
WRFD-010202
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
67192570
67192571
VS.AttCellUpdt
.ErrSRB
VS.AttCellUpdt
.ErrTRB
Number of Cell
Updates Due to
SRB RLC
Unrecoverable
Error for Cell
BSC6910
Number of Cell
Updates Due to
TRB RLC
Unrecoverable
Error for Cell
BSC6910
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
322
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67192572
VS.SuccCellUp
dt.ErrTRB
Number of
Successful Cell
Updates Due to
TRB RLC
Unrecoverable
Error for Cell
BSC6910
WRFD-010801
Number of Cell
Updates Due to
MBMS
Reception for
Cell
BSC6910
Number of
Successful Cell
Updates Due to
MBMS
Reception for
Cell
BSC6910
Number of Cell
Updates Due to
MBMS PtP RB
Request for Cell
BSC6910
67192573
67192574
67192575
VS.AttCellUpdt
.MbmsRecv
VS.SuccCellUp
dt.MbmsRecv
VS.AttCellUpdt
.MbmsPtpRbRe
q
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010616
WRFD-010801
WRFD-010802
WRFD-010616
WRFD-010801
WRFD-010802
WRFD-010616
67192576
73423781
VS.SuccCellUp
dt.MbmsPtpRb
Req
VS.SuccCellUp
dt.ErrSRB
Number of
Successful Cell
Updates Due to
MBMS PtP RB
Request for Cell
BSC6910
Number of
Successful Cell
Updates Due to
SRB RLC
Unrecoverable
Error for Cell
BSC6910
WRFD-010801
WRFD-010802
WRFD-010616
WRFD-010801
WRFD-010802
323
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73424125
VS.FailCellUpd
t.ErrSRB.NoRe
ply.FACH
Number of Cell
Update Failures
due to No
Response from
UEs in the
CELL_FACH
State (SRB RLC
ERROR) for
Cell
BSC6910
WRFD-010801
VS.FailCellUpd
t.ErrTRB.NoRe
ply.FACH
Number of Cell
Update Failures
due to No
Response from
UEs in the
CELL_FACH
State (TRB RLC
ERROR)for
Cell
BSC6910
VS.AttCellUpdt
.OrgConvCall.P
CH
Number of Cell
Update
Attempts for
Cell
(Originating
Conversational
Call)
BSC6910
VS.AttCellUpdt
.TmConvCall.P
CH
Number of Cell
Update
Attempts for
Cell
(Terminating
Conversational
Call)
BSC6910
VS.AttCellUpdt
.EmgCall.PCH
Number of Cell
Update
Attempts for
Cell
(Emergency
Call)
BSC6910
Number of
Successful Cell
Updates for Cell
(Originating
Conversational
Call)
BSC6910
73424126
73426327
73426328
73426329
73426330
VS.SuccCellUp
dt.OrgConvCall
.PCH
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
324
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426331
VS.SuccCellUp
dt.TmConvCall.
PCH
Number of
Successful Cell
Updates for Cell
(Terminating
Conversational
Call)
BSC6910
WRFD-010801
VS.SuccCellUp
dt.EmgCall.PC
H
Number of
Successful Cell
Updates for Cell
(Emergency
Call)
BSC6910
VS.AttCellUpdt
.OrgStrCall.PC
H
Number of Cell
Update
Attempts for
Cell
(Originating
Streaming Call)
BSC6910
VS.AttCellUpdt
.OrgInterCall.P
CH
Number of Cell
Update
Attempts for
Cell
(Originating
Interactive Call)
BSC6910
VS.AttCellUpdt
.OrgBkgCall.PC
H
Number of Cell
Update
Attempts for
Cell
(Originating
Background
Call)
BSC6910
VS.AttCellUpdt
.OrgSubCall.PC
H
Number of Cell
Update
Attempts for
Cell
(Originating
Subscribed
traffic Call)
BSC6910
VS.AttCellUpdt
.OrgHhPrSig.P
CH
Number of Cell
Update
Attempts for
Cell
(Originating
High Priority
Signalling)
BSC6910
73426332
73426812
73426813
73426814
73426815
73426816
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
325
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426817
VS.AttCellUpdt
.OrgLwPrSig.P
CH
Number of Cell
Update
Attempts for
Cell
(Originating
Low Priority
Signalling)
BSC6910
WRFD-010801
VS.AttCellUpdt
.TmStrCall.PC
H
Number of Cell
Update
Attempts for
Cell
(Terminating
Streaming Call)
BSC6910
VS.AttCellUpdt
.TmInterCall.P
CH
Number of Cell
Update
Attempts for
Cell
(Terminating
Interactive Call)
BSC6910
VS.AttCellUpdt
.TmBkgCall.PC
H
Number of Cell
Update
Attempts for
Cell
(Terminating
Background
Call)
BSC6910
VS.AttCellUpdt
.TmHhPrSig.PC
H
Number of Cell
Update
Attempts for
Cell
(Terminating
High Priority
Signalling)
BSC6910
VS.AttCellUpdt
.TmLwPrSig.P
CH
Number of Cell
Update
Attempts for
Cell
(Terminating
Low Priority
Signalling)
BSC6910
73426818
73426819
73426820
73426821
73426822
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
326
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426823
VS.AttCellUpdt
.Unknown.PCH
Number of Cell
Update
Attempts for
Cell
(Terminating cause unknown)
BSC6910
WRFD-010801
Number of Cell
Update
Attempts for
Cell
(Registration)
BSC6910
Number of Cell
Update
Attempts for
Cell (Detach)
BSC6910
Number of Cell
Update
Attempts for
Cell (Other)
BSC6910
VS.SuccCellUp
dt.OrgStrCall.P
CH
Number of
Successful Cell
Updates for Cell
(Originating
Streaming Call)
BSC6910
VS.SuccCellUp
dt.OrgInterCall.
PCH
Number of
Successful Cell
Updates for Cell
(Originating
Interactive Call)
BSC6910
VS.SuccCellUp
dt.OrgBkgCall.
PCH
Number of
Successful Cell
Updates for Cell
(Originating
Background
Call)
BSC6910
VS.SuccCellUp
dt.OrgSubCall.P
CH
Number of
Successful Cell
Updates for Cell
(Originating
Subscribed
traffic Call)
BSC6910
73426824
73426825
73426826
73426827
73426828
73426829
73426830
VS.AttCellUpdt
.Reg.PCH
VS.AttCellUpdt
.Detach.PCH
VS.AttCellUpdt
.Other.PCH
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
327
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426831
VS.SuccCellUp
dt.OrgHhPrSig.
PCH
Number of
Successful Cell
Updates for Cell
(Originating
High Priority
Signalling)
BSC6910
WRFD-010801
VS.SuccCellUp
dt.OrgLwPrSig.
PCH
Number of
Successful Cell
Updates for Cell
(Originating
Low Priority
Signalling)
BSC6910
VS.SuccCellUp
dt.TmStrCall.P
CH
Number of
Successful Cell
Updates for Cell
(Terminating
Streaming Call)
BSC6910
VS.SuccCellUp
dt.TmInterCall.
PCH
Number of
Successful Cell
Updates for Cell
(Terminating
Interactive Call)
BSC6910
VS.SuccCellUp
dt.TmBkgCall.P
CH
Number of
Successful Cell
Updates for Cell
(Terminating
Background
Call)
BSC6910
VS.SuccCellUp
dt.TmHhPrSig.
PCH
Number of
Successful Cell
Updates for Cell
(Terminating
High Priority
Signalling)
BSC6910
VS.SuccCellUp
dt.TmLwPrSig.
PCH
Number of
Successful Cell
Updates for Cell
(Terminating
Low Priority
Signalling)
BSC6910
73426832
73426833
73426834
73426835
73426836
73426837
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
328
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426838
VS.SuccCellUp
dt.Unknown.PC
H
Number of
Successful Cell
Updates for Cell
(Terminating cause unknown)
BSC6910
WRFD-010801
VS.SuccCellUp
dt.Reg.PCH
Number of
Successful Cell
Updates for Cell
(Registration)
BSC6910
Number of
Successful Cell
Updates for Cell
(Detach)
BSC6910
Number of
Successful Cell
Updates for Cell
(Other)
BSC6910
VS.CellUpdt.Co
nfirm.PageAnd
UlData.PCH
Number of
CELL UPDATE
CONFIRM
Messages Sent
by the RNC for
Cell (for the
CELL UPDATE
Messages with
the Cause Value
"uplink data
transmission" or
"paging
response")
BSC6910
VS.RRC.AttCo
nnEstab.CellUp
d.DSCR.CS
Number of CS
RRC
Connection
Setup Requests
in the DSCR
Procedure
Triggered by
Process
Overlapping for
Cell
BSC6910
73426839
73426840
73426841
73426843
73427913
VS.SuccCellUp
dt.Detach.PCH
VS.SuccCellUp
dt.Other.PCH
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010801
WRFD-010802
WRFD-010510
WRFD-010801
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Intra RNC Cell
Update
329
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73427914
VS.RRC.AttCo
nnEstab.CellUp
d.DSCR.PS
Number of PS
RRC
Connection
Setup Requests
in the DSCR
Procedure
Triggered by
Process
Overlapping for
Cell
BSC6910
WRFD-010510
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Number of RRC
Connection
Setup Requests
in the DSCR
Procedure
Triggered by
Process
Overlapping for
Cell (Others)
BSC6910
Number of RRC
Connection
Setup Requests
in the DSCR
Procedure
Triggered by
Process
Overlapping for
Cell (Service)
BSC6910
73427915
73427916
VS.RRC.AttCo
nnEstab.CellUp
d.DSCR.Other
VS.RRC.AttCo
nnEstab.CellUp
d.DSCR.Service
WRFD-010801
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Intra RNC Cell
Update
WRFD-010510
WRFD-010801
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Intra RNC Cell
Update
73428051
VS.Cell.Updt.E
cNo.0
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 0 for
Cell
BSC6910
WRFD-010801
73428052
VS.Cell.Updt.E
cNo.1
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 1 for
Cell
BSC6910
WRFD-010801
330
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73428053
VS.Cell.Updt.E
cNo.2
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 2 for
Cell
BSC6910
WRFD-010801
73428054
VS.Cell.Updt.E
cNo.3
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 3 for
Cell
BSC6910
WRFD-010801
73428055
VS.Cell.Updt.E
cNo.4
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 4 for
Cell
BSC6910
WRFD-010801
73428056
VS.Cell.Updt.E
cNo.5
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 5 for
Cell
BSC6910
WRFD-010801
73428057
VS.Cell.Updt.E
cNo.6
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 6 for
Cell
BSC6910
WRFD-010801
73428058
VS.Cell.Updt.E
cNo.7
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 7 for
Cell
BSC6910
WRFD-010801
331
WCDMA RAN
URA-Cell Update Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73428059
VS.Cell.Updt.E
cNo.8
Number of
Times the Ec/No
Indicated in a
CELL UPDATE
Message Falls
into Range 8 for
Cell
BSC6910
WRFD-010801
332
WCDMA RAN
URA-Cell Update Feature Parameter Description
7 Glossary
Glossary
For the acronyms, abbreviations, terms, and definitions, see the Glossary.
333
WCDMA RAN
URA-Cell Update Feature Parameter Description
8 Reference Documents
Reference Documents
1.
2.
3.
4.
5.
6.
334