Você está na página 1de 26

Capillary GC

Quadrex Capillary Columns


CRS offers capillary columns from Quadrex Corporation.
Quadrex offers a full range of bonded phases, all standard I.D.s and a wide range of film
thicknesses. Also available are specialty columns for environmental, petrochemical, high
temperature and triglycerides analysis, and columns for high speed analysis.

Capillary GC Columns

Stationary Phase

Quadrex Phase Designation

100% Methyl Silicone

007-1

Similar to: DB-1 (ms), HP-1 (ms), Ultra-1 RTx (ms),


SPB-1, MDN-1, BP-1, CP-Sil 5 CB, GB-1, AT-1, ZB-1

5% Phenyl / 95% Methyl Silicone

007-5

Similar to: DB-5 (ms), HP-5 (ms), Ultra-5, RTx-5 (ms)


SPB-5, MDN-5, BP-5, CP-Sil 8 CB, GB-5, AT-5, ZB-5

10% or 20% Phenyl / Methyl Silicone

007-10, -20

Similar to: RTx-20, SPB-20, AT-20

35% Phenyl / 60% Methyl Silicone

007-35

Similar to: DB-35 (ms), HP-35 (ms), AT-35, RTx-35,


RTx-35MS, Sup-Herb, MDN-35, BP-35, ZB-35

6% Cyanopropylphenyl / 94% Methyl Silicone

007-1301

Similar to: DB-624, HP-624, HP-VOC, Rtx-624, Rtx-Volatiles


BP-624, Vocol, NON-PAKD, 624, ZB-624

50% Phenyl / 50% Methyl Silicone

007-17

Similar to: DB-17, AT-50, SP-2250, DB-17ms, BPX-50,


SP-17, DB-608, SPB-608, HP-50+, SPB-50, CPSil-13CB

Proprietary Cyanopropylphenyl Methyl Silicone

007-502, -608, -624

Similar to: DB-624, Rtx-502, DB-608, SPB-6087, VOCOL,


Rtx-Volatiles, RTx-624, BP-624, CPSil-13CB

14% Cyanopropylphenyl / 86% Methyl Silicone

007-1701

Similar to: DB-1701, HP-1701, Rtx-1701, BP-10,


CP-Sil 19 CB, SPB-1701, ZB-1701

50% Cyanopropylphenyl / 50% Methyl Silicone

007-225

Similar to: DB-225ms, DB-225, HP-225, SPB-225, SP-2330,


Rtx-225, BP-225, CP-Sil 43 CB, ATT-225

78% Cyanopropyl / 22% Methyl Silicone

007-23

Similar to: DB-23, RTx-2330, BPx-70, SP2330, AT-SILAR,


CPSil88

Polyethylene Glycol, Acid Modified

007-FFAP

Similar to: DB-FFAP, HP-FFAP, CP-WAX 58 (FFAP) CB,


Stabilwax-DA, ZB-FFAP

Molecular Sieve 5A

PLT-5A

Similar to: GS-Molesieve 5A, HP-PLOT Molesieve,


CP-Molesieve 5A, MXT-Molsieve 5A

Chromatography Research Supplies, Inc.

Capillary GC
Quadrex Standard Phase Columns
To Build Catalog Numbers
0.1 mm ID Columns
Q (Phase Code) - NB (Length) - F (Film Thickness)
Available in 0.1, 0.25 and 0.5 m film thickness
0.1 mm ID/ 0.5 um film available in 15 m only
0.1 mm ID columns not available in 30 and 50 m
0.18 mm ID Columns
Q (Phase Code) - HS (Length) - F (Film Thickness)
Available in 0.1, 0.25 and 0.5 m film thickness
0.25 mm ID Columns
Q (Phase Code) - (Length) - F (Film Thickness)
Available in 0.1, 0.25, 0.5 and 1.0 mm film thickness
Example: Phase-5 Column, 30M x 0.25 mm ID x 1.0 m film thickness = Item Q5-30-1.0F

0.1 mm ID / 0.18 mm ID Columns


Phase
Code
1
5
5MS
5SVMS
10
20
35
1301
17
1701
CW
FFAP
225

Film Thickness
(microns)
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5
0.1 - 0.5

15

High efficiency; polyimide coated

25

Length (m)
30

50

0.25 mm ID Columns Polyimide coated


Phase
Code
1
5
5MS
5SVMS
10
20
35
1301
17
CW
BTR-CW
FFAP
225
23

Film Thickness
(microns)
0.1 - 1.0
0.1 - 1.0
0.1 - 0.5
0.1 - 0.5
0.1 - 1.0
0.1 - 1.0
0.1 - 1.0
0.1 - 0.5
0.1 - 1.0
0.1 - 1.0
0.1 - 1.0
0.1 - 1.0
0.1 - 1.0
0.1 - 0.25

www.chromres.com

15

25

30

Length (m)
50
60

75

100

Capillary GC
Quadrex Standard Phase Columns
To Build Catalog Numbers
0.32 mm ID Columns
Q (Phase Code) - W (Length) - F (Film Thickness)
Available in 0.1, 0.25, 0.5, 1.0, 2.0, 3.0, 4.0 and 5.0 m film thickness
Example: Phase 5, 30M x 0.32 mm ID x 1.0 m film thickness = Item Q5-30W-1.0F
Capillary GC Columns

0.32 mm ID Columns - Polyimide coated


Phase
Code
1
5
5MS
5SVMS
10
20
35
1301
17
1701
CW
BTR-CW
FFAP
225
23

Film Thickness
(microns)
0.1 - 1.0
2.0 - 5.0
0.1 - 1.0
2.0 - 5.0
0.1 - 1.0
0.1 - 1.0
0.1 - 1.0
2.0 - 5.0
0.1 - 1.0
2.0 - 5.0
0.1 - 1.0
2.0 - 5.0
0.1 - 5.0
0.1 - 1.0
2.0 - 3.0
0.1 - 1.0
2.0 - 3.0
0.1 - 1.0
2.0 - 3.0
0.1 - 1.0
2.0 - 3.0
0.1 - 1.0
2.0 - 3.0
0.1 - 1.0
0.1 - 0.25

15

25

30

Length (m)
50
60

75

100

Aluminum-Clad High Temperature Columns


(Al-Clad )
TM

400 C maximum, 440 C with ramp


50HT and 65HT have 370 C maximum, 390 C with ramp
O

0.25 mm ID Al-Clad Columns:


400 - (Phase Code) - (Length) - 0.1F
Phase
Code
1HT
5HT
50HT
65HT

Phase
Methyl Silicone
Methyl, 5% Phenyl Silicone
Methyl, 50% Phenyl Silicone
Methyl, 65% Phenyl Silicone

10

Length (m)
15

25

Chromatography Research Supplies, Inc.

Capillary GC
Specialty Columns
To Build Catalog Numbers
0.53 mm ID Columns
Q (Phase Code) - V (Length) - F (Film Thickness)
Available in 0.1, 0.25, 0.5, 1.0, 2.0, 3.0, 4.0, 5.0, 6.0*, 7.0*, and 8.0* m film thickness
Example: Phase 17, 50 m x 0.53 mm ID x 3.0 m film thickness = Item Q17-50V-3.0F

0.53 mm ID Column - Polyimide coated


Phase
Code
1
5
5MS
5SVMS
10
20
35
1301
17
1701
CW
BTR-CW
FFAP
225
23

Film Thickness
(microns)
0.1 - 8.0
0.1 - 8.0
0.1 - 1.5
0.1 - 1.5
0.1 - 5.0
0.1 - 5.0
0.1 - 5.0
0.1 - 1.0
0.1 - 3.0
0.1 - 3.0
0.1 - 5.0*
0.1 - 5.0*
0.1 - 5.0*
0.1 - 3.0
0.1 - 0.25

10

15

Length (m)
25

30

50

60

*The maximum length of 4.0 and 5.0 micron film CW and FFAP columns is 25 meters.

Phase
Description
Sulfur Gas Applications
007-SLFR
30 m x 0.32 mm ID x 4.0 m
EPA Method 624 - VOCs in Waste Water
007-624
30 m x 0.53 mm ID x 3.0 m
007-624
30 m x 0.32 mm ID x 3.0 m
007-624
50 m x 0.53 mm ID x 3.0 m
007-624
50 m x 0.53 mm ID x 5.0 m
007-624
30 m x 0.25 mm ID x 2.0 m
EPA Method 502 - VOCs in Drinking Water
007-502
75 m x 0.53 mm ID x 2.5 m
007-502
105 m x 0.53 mm ID x 2.0 m
EPA Method 608 - Pesticides
007-608
30 m x 0.53 mm ID x 0.8 m
007-608
15 m x 0.53 mm ID x 0.8 m for screening
007-5
30 m x 0.53 mm ID x 2.0 m for confirmation
007-17
30 m x 0.53 mm ID x 1.0 m for confirmation
Molecular Sieve Columns
Molecular Sieve 5A
30 m x 0.53 mm ID PLOT column

www.chromres.com

Item No.
QSLFR-30W-4.0F
Q624-30V-3.0F
Q624-30W-3.0F
Q624-50V-3.0F
Q624-50V-5.0F
Q624-30-2.0F
Q502-75V-2.5F
Q502-105V-2.0F
Q608-30V-0.8F
Q608-15V-0.8F
Q5-30V-2.0F
Q17-30V-1.0F
PLT-5A-30V

Capillary GC
Quadrex Extra Thick Phase Columns
New coating technology allows super thick non-polar phases
8 to 18 micron thickness possible
Ideal for low molecular weight compounds
007-1 is 100% methyl silicone
007-5 is 95% methyl 5% phenyl silicone

Phase

Length

Item No.

Capillary GC Columns
0.18 mm ID- Available extra thick films: 1.0, 3.0 and 5.0 m
007-1
15 m
Q1-15HS-(Film Thickness)F
007-1
30 m
Q1-30HS-(Film Thickness)F
007-5
15 m
Q5-15HS-(Film Thickness)F
007-5
30 m
Q5-30HS-(Film Thickness)F
0.25 mm ID- Available extra thick films: 3.0, 5.0 and 8.0 m
007-1
10 m
Q1-10-(Film Thickness)F
007-1
15 m
Q1-15-(Film Thickness)F
007-1
25 m
Q1-25-(Film Thickness)F
007-1
30 m
Q1-30-(Film Thickness)F
007-5
10 m
Q5-10-(Film Thickness)F
007-5
15 m
Q5-15-(Film Thickness)F
007-5
25 m
Q5-25-(Film Thickness)F
007-5
30 m
Q5-30-(Film Thickness)F
0.32 mm ID- Available extra thick films: 8.0, 10.0 and 12.0 m
007-1
10 m
Q1-10W-(Film Thickness)F
007-1
15 m
Q1-15W-(Film Thickness)F
007-1
25 m
Q1-25W-(Film Thickness)F
007-1
30 m
Q1-30W-(Film Thickness)F
007-5
10 m
Q5-10W-(Film Thickness)F
007-5
15 m
Q5-15W-(Film Thickness)F
007-5
25 m
Q5-25W-(Film Thickness)F
007-5
30 m
Q5-30W-(Film Thickness)F
0.53 mm ID - Available extra thick films: 6.0, 7.0 and 8.0 m
007-1
15 m
Q1-15V-(Film Thickness)F
007-1
25 m
Q1-25V-(Film Thickness)F
007-1
30 m
Q1-30V-(Film Thickness)F
007-1
60 m
Q1-60V-(Film Thickness)F
007-5
15 m
Q5-15V-(Film Thickness)F
007-5
25m
Q5-25V-(Film Thickness)F
007-5
30 m
Q5-30V-(Film Thickness)F
007-5
60 m
Q5-60V-(Film Thickness)F
0.53 mm ID - Available extra thick films: 10.0, 12.0, 15.0 and 18.0 m
007-1
10 m
Q1-10V-(Film Thickness)F
007-1
15 m
Q1-15V-(Film Thickness)F
007-1
25 m
Q1-25V-(Film Thickness)F
007-1
30 m
Q1-30V-(Film Thickness)F
007-5
10 m
Q5-10V-(Film Thickness)F
007-5
15 m
Q5-15V-(Film Thickness)F
007-5
25 m
Q5-25V-(Film Thickness)F
007-5
30 m
Q5-30V-(Film Thickness)F

Chromatography Research Supplies, Inc.

Capillary GC
Accessories
Capillary Survival Kit

TM

Our Capillary Survival Kit was designed with the practicing chromatographer in mind. Each kit
includes:
Magnifier with built in light
Slide-Lok tweezers for holding small items; spacing the column proper distances into
the injection port, etc.
15 cm steel ruler
3 column scribes, for cleanly-cut columns
2 universal unions for joining broken capillary columns or connecting guard columns
Single-ended pinvise holds drill bits
3 drill bits, 0.4 mm, 0.5 mm and 0.8 mm
Multipurpose septum pick
Nylon brushes, 1/8, 3/16, and 1/4
Pipecleaners 5 each,1/8 OD and 1/4 OD
Open-end wrench, 1/4 + 5/16
High temperature string (>400 C) 25 ft.
Ferrule remover - 2
O

Description
Capillary Survival Kit

205625

Item No.
205625

Universal Fused Silica Connectors


These quartz connectors will join columns from 0.25 mm to 0.53 mm id. Procedure: cut the
capillary column with a ceramic column scribe (page 8); be sure the end is cut squarely. Insert
the column into the appropriate leg of the connector to make a snug fit. Heat in the GC oven
under carrier gas flow for one hour at 250 C, to fuse the columns polyimide coating to the wall
of the union. For a stronger physical attachment we recommend using polyimide sealing resin
(page 8).
O

Description
Universal Connector, 5/pk
Universal Y-Splitter, each

Item No.
207950
207960
Universal Connector;
Universal Y-Splitter

Fused Silica Guard Column Kits


Kits include one 5 meter length of deactivated fused silica tubing and 5 universal glass unions.
Connect a length of tubing from 1/2 to 5 meters to your column, by inserting one end of each
into a universal union snugly. Fuse at 125 C under carrier gas flow in the GC oven for one hour.
When the guard column becomes contaminated break off a 1/2 meter length.
O

Description
0.25 mm id Guard Column Kit
0.32 mm id Guard Column Kit
0.53 mm id Guard Column Kit

Item No.
207625
207632
207653
Fused Silica Guard Column Kit

www.chromres.com

Capillary GC
Accessories
Deactivated Fused Silica Tubing
Polyimide coated; supplied on a 7 diameter cage.
ID
0.25 mm
0.32 mm
0.53 mm

15 m
432116
433116
435116

30 m
432131
433131
435131

Deactivated Fused Silica Tubing

Deactivated Fused Silica Tubing


Supplied in 3-pack of 1 meter pieces. It is deactivated by the same treatment used for capillary
columns. Polyimide coated.
Description
0.25 mm ID Tubing, 3 x 1 m
0.32 mm ID Tubing, 3 x 1 m
0.53 mm ID Tubing, 3 x 1 m

Item No.
432100
433100
435100

Fused Silica Tubing- Not Deactivated


Polyimide coated; supplied on a 7 diameter cage.
ID
0.25 mm
0.32 mm
0.53 mm

15 m
432115
433115
435115

30 m
432130
433130
435130

60 m
432160
433160
435160

Column Scribe
Used to cut capillary tubing. Simply pull one smooth edge of the hard ceramic scribe (tilted
about 45 degrees) across the column to lightly score the fused silica. Bend the column
opposite the score and the column separates cleanly.
Description
Column Scribe, 10/pk

Item No.
205312

205312

Polyimide Sealing Resin


Permanently seal silica columns to capillary column connectors, to eliminate leaks or
premature separation of the column. It is also useful as a high temperature glue. Maximum
operating temperature is 300 C. 10 grams.
O

Description
Polyimide Sealing Resin

Item No.
204002

204002

Chromatography Research Supplies, Inc.

Capillary GC
Accessories
Split Vent Trap
When using a GC in the split injection mode, up to 99% of the sample is vented to the lab
atmosphere. The split vent trap contains 1200 mg of activated charcoal, a highly effective
scrubber of organics, in replaceable tubes. Simply attach the split vent trap to the split vent
fitting on your GC, and replace the activated charcoal tube periodically. The trap consists of
glass adsorbent tubes, nickel plated 1/8 end fittings and a clear plastic sleeve. Each trap is
shipped with 3 spare replaceable charcoal tubes (4 total); replacing tubes is quick and easy.
We recommend changing replacement tubes every one to two weeks, depending on GC use.
Description
Split Vent Trap
Replacement Charcoal Tubes, 3/pk

Item No.
202346
202348

202346, 202348

Injection Port Cleaning Kit


This is designed for cleaning all GC injection ports, including those in Shimadzu instruments.
Kit contains three stainless steel brushes, 5 mm for Shimadzu, 1/4 and 3/8, and one scraper
for removing septum residue.
Description
Injection Port Cleaning Kit

Item No.
206211
206211

FID Cleaning Kit


Use this kit to clean both the jet tip and collector. It includes three jet reamers, 0.016, 0.019,
and 0.024 OD; one mini-drill bit 0.0102 OD; two wire mini-brushes, one brass and one
stainless steel; and a dual-ended handle for the reamers and brushes.
Description
FID Cleaning Kit

Item No.
205220
205220

Injection Liner Cleaning Kit


This kit includes four different sizes of nylon brushes to clean most liners, and one foot of pipe
cleaner. The 4 mm and 2 mm diameter brushes clean standard liners; the 1 mm and 0.5 mm
diameter brushes can reach inside reversible tapered liners.
Description
Injection Liner Cleaning Kit

Item No.
205215

205215

www.chromres.com

Capillary GC
Accessories
Fused Silica Visi-Union, Quartz Lined
O

This fitting may be used at temperatures up to 400 C. It has a quartz liner and self
compensating nuts for correct sealing force as temperature varies. Ferrules may be re-used,
and must be purchased separately.

Fused Silica Visi-Union

Description
Fused Silica Union
Replacement Liner
Replacement Nut

Item No.
FSKZU1
FSQ1
FSZN1

Ferrules for Fused Silica Visi-Union


For column ID 0.25 mm, 10/pk
For column ID 0.32 mm, 10/pk
For column ID 0.53 mm, 10/pk

FS1.35-R10
FS1.45-R10
FS1.75-R10

1/32 mm Ultra Low Mass External Unions


1/32 Union

For capillary tubing 0.1 mm to 0.32 mm ID. It has very low mass and can be hand-tightened to
seal. Use only with 1/32 fused silica adapters; metal ferrules cannot be used.
Description
1/32 Union, Bore 0.25 mm
1/32 Union, Bore 0.50 mm
1/32 Union, Bore 1/32 mm
1/32 Fused Silica Tubing Adapter
1/32 Fused Silica Tubing Adapter
1/32 Fused Silica Tubing Adapter

EU.5

Tubing OD

< 0.25 mm
0.25 - 0.4 mm
0.5 mm

Item No.
EU.5
EU.5L
EU.5T
FS.25
FS.4
FS.5

Ferrule Remover
Two tools are supplied for capillary ferrules from 0.4 mm to 0.8 mm ID. The tip has a spiral-cut
ratchet design that slides into the ferrule easily then grabs on the way out.
205315

Description
Ferrule Remover, 2/pk

Item No.
205315

Carbide- or Diamond-Tipped Pencils

205305

Used for cutting fused silica tubing, or special applications. Simple to use; score the tubing with
a single scratch, then bend opposite the scratch to separate the tubing.
Description
Carbide Tipped Pencil
Diamond Tipped Pencil

Item No.
205305
205310

205310

10

Chromatography Research Supplies, Inc.

Capillary GC
Accessories
Valco Removable Adapters
These provide direct connections of fused silica tubing within Valco fittings. The FSR adapter is
recommended for use in valves. It consists of two polyimide components: a liner which slides
over the fused silica tubing, and a ferrule. The liner and the capillary tubing will be removed
from the valve as the nut is unscrewed.
Description
1/32 Adapter with Removable Liner

1/32 Replacement Liner

1/32 Nut
1/32 Ferrule
1/16 Adapter with Removable Liner
1/16 Replacement Liner

Tubing OD
< 0.25 mm
0.25 - 0.4 mm
< 0.5 mm
< 0.25 mm
0.25 - 0.4 mm
< 0.5 mm

< 0.5 mm
0.6 - 0.8 mm
< 0.5 mm
0.6 - 0.8 mm

1/16 Nut
1/16 Ferrule

Item No.
FSR.25
FSR.4
FSR.5
FSL.25
FSL.4
FSL.5
ZN.5
ZN.5V
FS1R.5
FS1R.8
FS1L.5
FS1L.8
ZCN1
ZF1V

Valco Removable Adapters

Valco Fused Silica Adapters


These adapters permit easy use of capillary columns with Valco valves, and provide direct
connections of fused silica tubing within Valco fittings. Made from polyimide. The one-piece
fused silica adapter is not reusable; for reusable service use the Valco removable adapters.
Description
1/32 Fused Silica Tubing Adapter

1/32 Nut
1/32 Ferrule
1/16 Fused Silica Tubing Adapter

1/16 Nut
1/16 Ferrule

www.chromres.com

Tubing OD
< 0.25 mm
0.25 - 0.4 mm
0.5 mm

< 0.4 mm
0.5 mm
0.6 - 0.8 mm

Item No.
FS.25
FS.4
FS.5
ZN.5
ZF.5V
FS1.4
FS1.5
FS1.8
ZCN1
ZF1V

Valco Fused Silica Adapters

11

Capillary GC
Injection Port Liners
Polysiloxane deactivated borosilicate glass (quartz where noted)
Guaranteed inert for phenols, organic acids and bases
Glass wool is deactivated

Note the difference between a properly deactivated


liner and a non-deactivated liner, at right. Both
phenol runs were performed on the same column
and GC under identical conditions except for the
liners.
Column:

Non-Deactivated Liner

Deactivated Liner

Bonded Trifluoropropyl Polysiloxane


0.25 mm I.D. x 30 m x 0.2 mm film
Item No. Q210-30-0.2F

Temp: 50 (7/min)270C
Injector: 225C
Detector: MSD, Interface temp. 290C
Carrier: He, 30cm/sec
1.
2.
3.
4.
5.
6.

Phenol
2-chlorophenol
2,4-Dimethylphenol
2,4-Dichlorophenol
2-Nitrophenol
4-Chloro-3-methylphenol

7.
8.
9.
10.
11.

2,4,6-Trichlorophenol
4-Nitrophenol
Pentachlorophenol
2,4-Dinitrophenol
4,6-Dinitro-2-methyl phenol

CRS injection port liners provide a clean, nonadsorptive surface for your sample. Regular
replacement of liners protect your capillary column from potentially harmful non-volatiles that
might otherwise deposit on your column.
All liners help protect the vaporized sample from contacting the metal wall of the inlet as
sample flows onto the column. Deactivated glass wool may be used as an aid for sample
vaporization, to minimize discrimination based on boiling point, and to provide a surface on
which non-volatiles can be trapped. The simplest liner is a straight tube, which gives all-around
good performance at low cost. Single-taper liners improve on a straight tube by minimizing
sample vapor contact with metal at the bottom of the injection port, although they are
somewhat more expensive. Liner designs are further optimized for specific injection
techniques.
Splitless Liners These are designed to lead the sample vapor onto the column with the least
hindrance possible, so they are usually without baffles or restrictions. Tapered ends can be
used to minimize sample breakdown, and confine the sample vapor to the liner. Glass wool can
be used to protect the column from non-volatiles and as an aid to complete vaporization.
Split Liners During split injections it is important that the sample is both completely vaporized
and well mixed, to minimize discrimination in the fraction of sample entering the column.
Designs to accomplish this include the cup splitter, that completely reverses flow of the carrier
gas in one section, and liners with integral glass frits. Deactivated glass wool can also be
helpful. The outside diameter of split liners are slightly smaller than splitless liners, about 0.2
mm, for easy flow of carrier gas outside the liner at higher split ratios. For this reason there are
two different ID graphite seals for some lines of split and splitless liners.
Direct Liners This term is used by some manufacturers for liners in which the sample passes
from an outside sampler such as headspace or purge and trap, directly through the inlet onto
the column. These are also liners used with wide-bore capillaries or packed columns. The
internal volume is typically low.

12

Chromatography Research Supplies, Inc.

Capillary GC
Injection Port Liners
For Agilent Capillary GCs
Style
2 mm Splitless

Length x OD (mm)
x OD (mm)
79 x 6.5

2 mm Splitless, Quartz

Similar
Item No.

79 x 6.5
5181-8818
18740-80220

4 mm Split/ Splitless

79 x 6.3
210-3003

4 mm Split/ Splitless
Quartz

79 x 6.3

4 mm Split/ Splitless with


Deactivated Glass Wool

79 x 6.3

Split Liner, 4 mm ID with


Cup

79 x 6.3

19251-60540

18740-80190

Split Cup Liner, 4 mm ID


79 x 6.3
with Deactivated Glass Wool
Split Cup Liner, 4 mm ID,
79 x 6.3
OV-1/ Chromosorb W-HP
80/100
Single Taper Liner, 2 mm ID 79 x 6.5

18740-60840

Single Taper Liner, 4 mm ID 79 x 6.5


5181-3316
Single Taper Liner, 4 mm ID 79 x 6.5
with Deactivated Glass Wool

5062-3587

Double Taper Liner, 4 mm ID 79 x 6.5


5181-3315

Qty
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10

Item No.
208110
208110-5
208110-10
208111
208111-5
208111-10
208112
208112-5
208112-10
208122
208122-5
208122-10
208113
208113-5
208113-10
208114
208114-5
208114-10
208124
208124-5
208124-10
208115
208115-5
208115-10
208129
208129-5
208129-10
208119
208119-5
208119-10
208120
208120-5
208120-10
208116
208116-5
208116-10

208110

208111

208112

208122

208113

208114

208124

208115

208129

208119

208120

208116

Liner Seals; O-ring for Agilent Instruments


Graphite liner seals are designed for Agilent-style liners, in two different IDs. The O-ring seal is
made of Viton .

Description
Graphite Liner Seal, 6.35 mm ID
Graphite Liner Seal, 6.52 mm ID
O-ring made of Viton

www.chromres.com

Similar Item No.


5180-4168
5180-4173

Qty
10/pk
10/pk
12/pk

Item No.
216635
216652
216973

216973

13

Capillary GC
Injection Port Liners
For Agilent Packed Column GCs

208130
208132

Style
Universal Packed Injection
Liner, Deactivated
Universal Packed Injection
Liner, Not Deactivated

Length
93 mm

Similar
Item No.
5181-3382

93 mm

5080-8732

Qty
1
25
1
25

Item No.
208130
208130-25
208132
208132-25

Qty
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10

Item No.
208232
208232-5
208232-10
208233
208233-5
208233-10
208234
208234-5
208234-10
208212
208212-5
208212-10
208214
208214-5
208214-10

For PerkinElmer Capillary GCs


Style
Split Liner for Autosystem
4 mm ID

Length
92 mm

Split Liner for Autosystem,


4 mm ID, Deactivated Glass
Wool
Splitless Liner, Autosystem
2 mm ID

92 mm

Similar
Item No.
N610-1052

208232

208233

92 mm
N612-1372

208234
Dimple Splitter

100 mm
0330-5181

208212
Splitless

100 mm
0330-5180

208214

For PerkinElmer Packed Column GCs


Style
Glass Liner for Autosystem

Length
112 mm

Similar
Item No.
N610-1048

208240

208242

14

Glass Liner for 8000 Series; 101 mm


Sigma 2000

0330-2221

Qty
1
5
10
1
5
10

Item No.
208240
208240-5
208240-10
208242
208242-5
208242-10

Chromatography Research Supplies, Inc.

Capillary GC
Injection Port Liners
For Thermo Instrument Capillary GCs
Style
Split, 3 mm ID

Similar
Item No.

Length
105 mm

453 50031
Split, 5 mm ID

105 mm
453 50030

Splitless, 3 mm ID

105 mm
453 50032

Splitless, 5 mm ID

105 mm
453 50033

For Wide Bore Columns

105 mm
453 00310

Cup Liner

105 mm
453 00320

PTV Liner, 2 mm ID

120 mm
453 22045

Qty
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10

Item No.
208611
208611-5
208611-10
208612
208612-5
208612-10
208615
208615-5
208615-10
208616
208616-5
208616-10
208617
208617-5
208617-10
208618
208618-5
208618-10
208620
208620-5
208620-10

208611

208612

208615

208616

208617

208618

208620

Graphite Liner Seal; Thermo Instrument Trace GC


Description
8 mm Graphite Liner Seal, each

Similar Item No.


290 334 06

Item No.
216948
8 mm Graphite Liner Seal for Trace GC

For Shimadzu Capillary GC


Style
Split Liner 14A

Length
99 mm

Similar
Item No.
221-32544-01

Splitless Liner 14A

99 mm
221-32544-00

www.chromres.com

Qty
1
5
10
1
5
10

Item No.
208414
208414-5
208414-10
208416
208416-5
208416-10

208414

208416

15

Capillary GC
Injection Port Liners
For Varian Capillary GCs
Style
2 mm Splitless

For
Injector
1177

Length
x OD, mm
79 x 6.5

1177

79 x 6.5

Similar
Item No.

208110
2 mm Splitless, Quartz

392611924
208111

4 mm Split/ Splitless

1177

79 x 6.3

4 mm Split/ Splitless
Quartz

1177

79 x 6.3

4 mm Split/ Splitless with


Deactivated Glass Wool

1177

79 x 6.3

Split Liner, 4 mm ID with


Cup

1177

Split Cup Liner, 4 mm ID


with Deactivated Glass Wool

1177

Split Cup Liner, 4 mm ID,


OV-1/ Chromosorb W-HP
80/100
Single Taper Liner, 2 mm ID

1177

208112

208122
392611934

208113
79 x 6.3
392611931

208114
79 x 6.3
392611932

208124

208115

79 x 6.3
392611933

1177

79 x 6.5
392611926

208129
Single Taper Liner, 4 mm ID

1177

79 x 6.5
392611927

208119
Single Taper Liner, 4 mm ID
with Deactivated Glass Wool

1177

Double Taper Liner, 4 mm ID

1177

79 x 6.5
392611936

208120
79 x 6.5
392611929
208116

16

Qty
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10

Item No.
208110
208110-5
208110-10
208111
208111-5
208111-10
208112
208112-5
208112-10
208122
208122-5
208122-10
208113
208113-5
208113-10
208114
208114-5
208114-10
208124
208124-5
208124-10
208115
208115-5
208115-10
208129
208129-5
208129-10
208119
208119-5
208119-10
208120
208120-5
208120-10
208116
208116-5
208116-10

Chromatography Research Supplies, Inc.

Capillary GC
Injection Port Liners
For Varian Capillary GCs
Style
4 mm Open Split Liner

For
Injector
1075/1077

Length
72 mm

Similar
Item No.
16-000830-00

4 mm Open Split Liner


with Glass Wool

1075/1077

Frit Split Liner

1075/1077

72 mm
01-900109-01
72 mm

Splitless, Borosilicate Glass 1075/1077

74 mm

Splitless, Quartz

74 mm

1075/1077

01-900109-03
16-000830-01
01-900109-05
03-949437-90
03-949437-00
392611934

0.5 mm SPI

1093/1094

54 mm
301-900109-06
03-918332-01

0.8 mm SPI

1093/1094

54 mm
01-900109-07
03-918332-02

3.4 mm ID x 5 mm OD

1078/1079

54 mm
392611933

www.chromres.com

Qty
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10
1
5
10

Item No.
208311
208311-5
208311-10
208313
208313-5
208313-10
208312
208312-5
208312-10
208314
208314-5
208314-10
208315
208315-5
208315-10
208316
208316-5
208316-10
208318
208318-5
208318-10
208346
208346-5
208346-10

208311

208313

208312

208314

208315

208316

208318

208346

17

Capillary GC
Ferrules
Capillary Column Ferrules

CRS provides ferrules for capillary columns made from Graphite, Vespel , Vespel /Graphite and
PTFE. For more information see pages 46 - 50.

Graphite Ferrules

Graphite For high temperature use. This is also the softest ferrule material, so it seals gas tight
with finger-tight pressures, without the risk of breaking the column. May be reused several
times if not over-tightened. The one-piece design fits standard fittings, and does not need a
back ferrule. Upper temperature limit is 450 C.
O

Vespel/Graphite Ferrules made from a polyimide/graphite blend are recommended for GC/MS
interface applications. Our one-piece design requires no back ferrule, and can be reused if not
over-tightened. Upper temperature limit is 400 C.
O

Ferrules/ Capillary Columns


0.25 mm ID columns use 0.4 mm ID ferrules
0.32 mm ID columns use 0.5 mm ID ferrules
0.53 mm ID columns use 0.8 mm ID ferrules

Note: Most capillary GCs use 1/16 ferrules; for PerkinElmer Sigma Series use 1/8 ferrules.
Agilent style are reducing ferrules designed to fit all inlets and detectors on the Agilent 5890,
6890 and 7890 except the MSD. The MSD should be used with standard 1/16 ferrules,
preferably made from Vespel/Graphite.

Ferrule Sizes
A 1/16 ferrule actually measures 1/8 in diameter, while 1/8 ferrules measure 1/4 in diameter.
Ferrule terminology arose because a 1/16 ferrule was normally used with 1/16 OD tubing, and
so required a ferrule about twice a width. Capillary chromatographers use the same 1/16
fittings, even though capillary columns are much narrower than 1/16 tubing. 1/16 ferrules are
standard for most GCs except the Agilent Split/Splitless injector, which uses 1/16 ferrules of a
special shape. Other exceptions include PerkinElmer, Shimadzu and Thermo Instrument GCs.

Ferrules - Sold in packages of 10


Size
1/16 mm to 0.3 mm
1/16 mm to 0.4 mm
1/16 mm to 0.5 mm
1/16 mm to 0.8 mm
1/16 mm two-hole 0.4 mm / 0.4 mm
1/16 mm two-hole 0.5 mm / 0.5 mm
Agilent Style
1/16 mm to 0.4 mm
1/16 mm to 0.5 mm
1/16 mm to 0.8 mm
1/16 mm to 1.0 mm

Graphite
211104
211105
211108
211124
211125

211164
211165
211168
211160

Vespel/Graphite
213103
213104
213105
213108
213124
213125

213164
213165
213168

*For Thermo Instrument ferrules, see pages 24 and 48.

18

Chromatography Research Supplies, Inc.

Capillary GC
Shimadzu Supplies
Supplies for Shimadzu Instruments
Liners
Style
Split Liner 14A
Splitless Liner 14A

Length
99 mm
99 mm

Qty
10/pk
10/pk

Item No.
208414-10
208416-10

Graphite Ferrules - Sold in packages of 10


Style
5 mm, Shimadzu 5 mm OD columns

Item No.
211500

211500

Premium Septa

BTO - Maximum temperature 400 C, low bleed


O

Description
Plug Septa

Qty
50/pk

Item No.
298735
298735

TM

Advanced Green 3 - Maximum temperature 400 C, low bleed


O

Description
Plug Septa

Qty
50/pk

TM

Item No.
246424
246424

Marathon - Maximum temperature 400 C, outstanding lifetime


Description
Plug Septa

Qty
50/pk

Item No.
239498
239498

www.chromres.com

19

Capillary GC
Agilent Supplies
Supplies for Agilent Instruments
Liners
Style
2 mm Splitless, Quartz
4 mm Split/ Splitless
4 mm Split/ Splitless Quartz
Split Liner, 4 mm ID with Cup
Single Taper, 4 mm ID
with Deactivated Glass Wool

Length x OD (mm)
x OD (mm)
79 x 6.5
79 x 6.3
79 x 6.3
79 x 6.3
79 x 6.5

Qty
10/pk
10/pk
10/pk
10/pk
10/pk

Item No.
208111-10
208112-10
208122-10
208114-10
208120-10

Ferrules - Graphite - Sold in packages of 10


Description

211105

Item No.

Capillary Column Ferrules


1/16 to 0.4 mm
1/16 to 0.5 mm
1/16 to 0.8 mm
1/16 to 1.0 mm
1/16 to 1.2 mm

For Capillary Sizes - ID


0.25 mm
0.32 mm
0.53 mm
0.65 mm
0.75 mm

Short Ferrules for Agilent Inlets*


1/16 to 0.4 mm
1/16 to 0.5 mm
1/16 to 0.8 mm
1/16 to 1.0 mm

0.18 mm
0.25 - 0.32 mm
0.53 mm
0.53 - 0.65 mm

211104
211105
211108
211110
211112

211164
211165
211168
211160

Ferrules - Vespel /Graphite - 40% Vespel/ 60% Graphite


Sold in packages of 10
Description

213105

213164

Capillary Column Ferrules


1/16 to 0.3 mm
1/16 to 0.4 mm
1/16 to 0.5 mm
1/16 to 0.8 mm
1/16 to 1.0 mm
1/16 to 1.2 mm

Item No.
For Capillary Sizes - ID

Short Ferrules for Agilent Inlets*


1/16 to 0.3 mm
1/16 to 0.4 mm
1/16 to 0.5 mm
1/16 to 0.8 mm

0.25 mm
0.32 mm
0.53 mm
0.65 mm
0.75 mm

213103
213104
213105
213108
213110
213112

0.10 mm
0.25 mm
0.32 mm
0.53 mm

213163
213164
213165
213168

*Short ferrule for Agilent inlet systems: 5890, 6890 and 7890.

20

Chromatography Research Supplies, Inc.

Capillary GC
Agilent Supplies
Supplies for Agilent Instruments
Liner Seals; O-ring
Graphite liner seals are designed for Agilent-style liners, in two different IDs. The O-ring seal is
made of Viton .

Description
Graphite Liner Seal, 6.4 mm ID
Graphite Liner Seal, 6.5 mm ID
O-ring made of Viton

Qty
10/pk
10/pk
12/pk

Item No.
216635
216652
216973

216973

Premium Septa
Agilent Instrument
5880A, 5890, 6890, 6850, 7890 PVT
On-column injection

Septum Size
11 mm
5 mm

BTO - Maximum temperature 400 C, low bleed


O

Description
5 mm with CenterGuide
11 mm with CenterGuide
11 mm with CenterGuide

Qty
50/pk
50/pk
100/pk

TM

Item No.
298787
298717
298718
298717

TM

Advanced Green 3 - Maximum temperature 400 C, low bleed


O

Description
5 mm with CenterGuide
11 mm with CenterGuide
11 mm with CenterGuide

TM

Qty
50/pk
50/pk
100/pk

Item No.
246525
246225
246228

Marathon - Maximum temperature 400 C, outstanding lifetime


Description
5 mm with CenterGuide
11 mm with CenterGuide
11 mm with CenterGuide

246225

Qty
50/pk
50/pk
100/pk

Item No.
239597
239297
239888

239297

www.chromres.com

21

Capillary GC
PerkinElmer Supplies
Supplies for PerkinElmer Instruments
Liners
Style
4 mm ID Split for Autosystem
4 mm ID Split for Autosystem,
Deactivated Glass Wool
2 mm ID Splitless for
Autosystem
Dimple Splitter
Splitless

Length
92 mm
92 mm

Qty
10/pk
10/pk

Item No.
208232-10
208233-10

92 mm

10/pk

208234-10

100 mm
100 mm

10/pk
10/pk

208212-10
208214-10

Ferrules - Graphite - Sold in packages of 10


Description

Item No.

Reducing Ferrules
1/8 to 0.4 mm
1/8 to 0.5 mm
1/8 to 0.8 mm
1/8, two-hole, 0.5 mm each

For Capillary Sizes - ID


0.25 mm
0.32 mm
0.53 mm
0.32 mm

211204
211205
211208
211222

1/8 to 1/16

For Capillary Sizes - OD


1/16

211210

Ferrules - Vespel /Graphite - 40% Vespel/ 60% Graphite


Sold in packages of 10
Description

213105

22

Item No.

Reducing Ferrules
1/8 to 0.4 mm
1/8 to 0.5 mm
1/8 to 0.8 mm
1/8, two-hole, 0.5 mm each
1/8, two-hole, 0.8 mm each

For Capillary Sizes - ID


0.25 mm
0.32 mm
0.53 mm
0.32 mm
0.53 mm

213204
213205
213208
213222
213228

1/8 to 1/16

For Capillary Sizes- OD


1/16

212210

Chromatography Research Supplies, Inc.

Capillary GC
PerkinElmer Supplies
Supplies for PerkinElmer Instruments
Premium Septa
PerkinElmer Instrument
Sigma Series, 900, 990, 8000 Series
Auto SYS , Auto SYS XL

Septum Size
11 mm
11 mm

TM

BTO - Maximum temperature 400 C, low bleed


O

Description
11 mm with CenterGuide
11 mm with CenterGuide

Qty
50/pk
100/pk

TM

Item No.
298717
298718

Advanced Green 3 - Maximum temperature 400 C, low bleed


Description
11 mm with CenterGuide
11 mm with CenterGuide

TM

Qty
50/pk
100/pk

Item No.
246225
246228
246225

Marathon - Maximum temperature 400 C, outstanding lifetime


Description
11 mm with CenterGuide
11 mm with CenterGuide

298717

Qty
50/pk
100/pk

Item No.
239297
239888

239297

www.chromres.com

23

Capillary GC
Thermo Instrument Supplies
Supplies for Thermo Instruments
Liners
Style
Split, 3 mm ID
Split, 5 mm ID
Splitless, 3 mm ID
Splitless, 5 mm ID
For Wide Bore Columns
Cup Liner
PTV Liner, 2 mm ID

Length
105 mm
105 mm
105 mm
105 mm
105 mm
105 mm
120 mm

Qty
10/pk
10/pk
10/pk
10/pk
10/pk
10/pk
10/pk

Item No.
208611-10
208612-10
208615-10
208616-10
208617-10
208618-10
208620-10

Graphite Liner Seal - Thermo Instruments Trace GC


Description
8 mm Graphite Liner Seal, each

Item No.
216948

216948

Graphite Ferrules - Sold in packages of 10

211905

Style
Thermo Instrument Ferrules
M8 Nut
0.5 mm ID
0.8 mm ID
Cup Ferrules - M4 Nut
0.25 mm ID
0.35 mm ID
0.45 mm ID
0.8 mm ID

Item No.

211905
211908

211982-10
211983-10
211984-10
211988-10

211983

24

Chromatography Research Supplies, Inc.

Capillary GC
Thermo Instrument Supplies
Supplies for Thermo Instruments
Premium Septa
Thermo Instrument
9001, GCQ
PTV Injector
Fisons / Carlo Erba 8000 Series, Trace, Focus Split/Splitless

Septum Size
3/8 (9.5 mm)
1/2 (12.7 mm)
17 mm

BTO - Maximum temperature 400 C, low bleed


O

Description
3/8 (9.5 mm) with CenterGuide
1/2 (12.7 mm) with CenterGuide
17 mm with CenterGuide

Qty
50/pk
50/pk
50/pk

TM

Item No.
298713
298727
298817

Advanced Green 3 - Maximum temperature 400 C, low bleed


O

Description
3/8 (9.5 mm) with CenterGuide
1/2 (12.7 mm) with CenterGuide
17 mm with CenterGuide

TM

Qty
50/pk
50/pk
50/pk

Item No.
246713
246325
246624
246624

Marathon - Maximum temperature 400 C, outstanding lifetime


Description
3/8 (9.5 mm) with CenterGuide
1/2 (12.7 mm) with CenterGuide
17 mm with CenterGuide

www.chromres.com

Qty
50/pk
50/pk
50/pk

Item No.
239779
239397
239698

239698

25

Capillary GC
Varian Supplies
Supplies for Varian Instruments
Liners
Style
2 mm Splitless, Quartz
4 mm Split/ Splitless
4 mm Split/ Splitless, Quartz
Split Liner, 4 mm ID with Cup
Single Taper Liner, 4 mm ID
with Deactivated Glass Wool

For
Injector
1177
1177
1177
1177
1177

Length
x OD, mm
79 x 6.5
79 x 6.3
79 x 6.3
79 x 6.3
79 x 6.5

Qty
10/pk
10/pk
10/pk
10/pk
10/pk

Item No.
208111-10
208112-10
208122-10
208114-10
208120-10

Ferrules - Graphite - Sold in packages of 10


Description

211105

Item No.

Capillary Column Ferrules


1/16 to 0.4 mm
1/16 to 0.5 mm
1/16 to 0.8 mm
1/16 to 1.0 mm
1/16 to 1.2 mm

For Capillary Sizes - ID


0.25 mm
0.32 mm
0.53 mm
0.65 mm
0.75 mm

211104
211105
211108
211110
211112

Ferrules - Vespel /Graphite - 40% Vespel/ 60% Graphite


Sold in packages of 10
Description

213105

26

Capillary Column Ferrules


1/16 to 0.3 mm
1/16 to 0.4 mm
1/16 to 0.5 mm
1/16 to 0.8 mm
1/16 to 1.0 mm
1/16 to 1.2 mm

Item No.
For Capillary Sizes - ID
0.25 mm
0.32 mm
0.53 mm
0.65 mm
0.75 mm

213103
213104
213105
213108
213110
213112

Chromatography Research Supplies, Inc.

Capillary GC
Varian Supplies
Supplies for Varian Instruments
Premium Septa
Varian Instrument
Packed Column
Split/Splitless 1078/1078
1177
1075 / 1077

Septum Size
10 mm
10 mm; 11 mm
9mm
11 mm

BTO - Maximum temperature 400 C, low bleed


O

Description
9 mm with CenterGuide
9.5 mm with CenterGuide
10 mm
11 mm with CenterGuide
11 mm with CenterGuide

Qty
50/pk
50/pk
50/pk
50/pk
100/pk

TM

TM

Item No.
298713
298705
298745
298717
298718

298717

Advanced Green 3 - Maximum temperature 400 C, low bleed


O

Description
9 mm with CenterGuide
9.5 mm with CenterGuide
11 mm with CenterGuide
11 mm with CenterGuide

Qty
50/pk
50/pk
50/pk
100/pk

Item No.
246713
246124
246225
246228
246225

TM

Marathon - Maximum temperature 400 C, outstanding lifetime


Description
9 mm with CenterGuide
9.5 mm
11 mm with CenterGuide
11 mm with CenterGuide

Qty
50/pk
50/pk
50/pk
100/pk

Item No.
239597
239198
239297
239888
239297

www.chromres.com

27

Você também pode gostar