Escolar Documentos
Profissional Documentos
Cultura Documentos
ACCESSORIES
1.0 INTRODUCCION:3
2.0 CONSIDERACIONES GENERALES:3
3.0 CODIGOS Y NORMAS:3
4.0 ESPECIFICACIONES TECNICAS:3- 5
5.0 LISTADO DE MATERIALES:5
6.0 INSTALACION A PROTEGER - EDIFICIO:6
7.0 CALCULO DEL SISTEMA DE PROTECCION:7-8
8.0 SISTEMA DE PROTECCION CONTRA DESCARGA DE RAYOS:9-13
9.0 LISTADO DE MATERIALES:14-16
1.0INTRODUCTION
2.0GENERAL CONSIDERATIONS
3.0CODES AND STANDARDS
4.0TECHNICAL SPECIFICATIONS
5.0LIST OF MATERIALS
6.0INSTALLATION TO PROTECT- BUILDING
7.0CALCULATION OF PROTECTION SYSTEM
8.0PROTECTION SYSTEM LIGHTNING DISCHARGE
9.0LIST OF MATERIALS
1.0 INTRODUCTION:
This paper describes the calculation memory system lightning protection
and description of materials for the project Insectaria downloads - Iquitos.
2.0 GENERAL:
These calculations are applicable only for the system lightning protection for
building protection considered the Insectaria Project - Iquitos and does not
apply to other facilities and / or staff that may be located near it.
The materials described herein, will be used in the system type Building
Faraday cage protection, they have been selected according to the rules and
calculations in this document.
For the distribution of air terminals and area calculation system protection
against lightning, it will continue as indicated in the regulations for
installation of lightning protection systems: NFPA 780, UNE EN62305.
Fastening clamp
ITEM
DESCRIPTION
QUANTITY
CODE
1
air terminal
08 pcs
572
2
articulated base
08 pcs
30
3
Fastening clamp
10 pcs
613
4
Bare copper wire 70 mm2
85 m
N/A
5
Pivoting adapter p / pararrayo
08 und
N/A
6
Clamp w / tube 1 "" Screw
06 und
N/A
7
Conduit adapter tube - corrugated tube
02 und
N/A
The building to be protected within the project has the following dimensions:
Length: 13,818 m.
Width: 8.36 m.
Height: 9.75 m (approx.)
Equipment to be protected:
- Lab.
- Electronic equipment.
- Switchboard.