Escolar Documentos
Profissional Documentos
Cultura Documentos
System:
All conditions of the certification report has to be respected.
The procedures for the changes in the System (either HW or
SW) should be referred to maintenance manual (B-63005).
When safety related components are exchanged, confirmation
test regarding safety functions can be performed accoding to
Chapter 8.
Programming in ladder logic should be referred to programming
manual (B-61863E).
Training
FANUC Training Center provides versatile training course for the
person who is concerned with hardware installation, maintenance and
operation. FANUC recommend studying and learning in the training
center how efficiently operate FANUC products.
There are 3 CNC training course.
[CNC ELEMENTARY COURSE]
Provides basics of CNC functions, operation and programming. The
course is recommended before taking more specialized training
courses to gain best effects.
MAIN ITEMS OF TRAINING
CNC functions
Configuration of CNC
Configuration and function of servo system
Basic programming of CNC
Part programming of milling machine
Part programming of turning machine
Introduction of Custom Macro function
[CNC MAINTENANCE COURSE]
To master maintenance technique that permits you to maintain and
inspect CNC, also how to restore it promptly if a trouble should
occur.
MAIN ITEMS OF TRAINING
Function and configuration of Power Unit
Function and configuration of CNC system
Include AC servo and AC spindle
Self-diagnosis function
Interface between CNC and the machine tools
Data saving and restoring operation
Trouble shooting
B-63494EN/01 1.OVERVIEW
SYSTEM CONFIGURATION
Applicable CNC
FANUC Series 16i/18i/20i/21i/160is/180is/210is/160i/180i/210i
(LCD-mounted type)
FANUC Series 16i/18i/21i/160is/180is/210is/160i/180i/210i
(stand-alone type)
Amplif