Escolar Documentos
Profissional Documentos
Cultura Documentos
We are required to develop the matlab program that will calculate various parameters of the given
transmission line. The following are the steps for this:
(i)
(ii)
(iii)
Display the User options for selecting Transmission line he/she wants to find its
parameters.
Displaying User Input option (1-3) for selecting transmission line
Displaying user option for user to input dimensions of the selected transmission line
CASE 1: If the user select 1 he/she will be prompted with the following:
The above inputs are for the given testing dimensions, the output for various parameters are given
in the snapshot below:
After the user see the output he/she will be prompted if he/she wants to proceed with other
transmission line or to quit the application. If the user enter y he/she will be returned to the home
screen and if he/she enters n he/she will quit the application.
CASE 2: If the user select 2, the user will be required to enter the following dimensions:
The output for various parameters of a parallel plate line are as follows:
CASE 3: If the user select 3, he/she will be prompted with the following to enter the required
dimensions for the two wire transmission line:
The source codes for the program are given in a file named parameters.m in the same folder.