Escolar Documentos
Profissional Documentos
Cultura Documentos
Gi2 Features
Channelyser Function
The Channelyser allows the user to interrogate the local networks
and display the Broadcast information.
This information is used for the configuration of the system
Available
Networks
List of BCCH
detected and
broadcast details
Graphical
Representation of
the 900 MHz band
Graphical
Representation of
the 1800 MHz band
Channelyser Function
The Channelyser allows the user to interrogate the local networks
for the purpose of collecting and display the network information.
This information is used for the configuration of the system
Different Scans can be selected according to preference and the
installed hardware
Channelyser Function
The Channelyser allows the user to interrogate the local networks
for the purpose of collecting and display the network information.
This information is used for the configuration of the system
Different Scans can be selected according to preference and the
installed hardware
Logs of all scans are stored
Tx Output power
GSM Lists
The List overrides ANY Mode
i.e. If a Handset is in a List then ONLY the List rule applies to that Phone. The Mode
is ignored by the single handset but still applies to EVERYBODY else.
GSM Lists
Handset in
White List
GSM Lists
Handsets see our
Transmission
They attempt to
register (LAC Update)
System allows the
Registration &
HOLDS all Phones
EXCEPT those in the
Black List
Handset in
Black List
GSM Lists
Handset in
DoS List
Description
Intercepted (Can be Forwarded to Target)
System Only
System + Uni
System + BiDi
Outgoing SMS
To Captured Handset
From Captured Handset to any Recipient
Incoming Calls
Outgoing Calls
Fake Calls
Make Calls To
*Caller ID is Withheld
** must use 'Send Advertising'
RTX Control
RTX Control is the area where the user defines the transmission
parameters that will be sent to the BTS
Identities
MS captured by the Gi2 can be
viewed in the Identities window.
Much information can be readily
found for each captured Identity
Identity Manager
The Identity Manager allows the
user to define special identities.
These may be law enforcement
agents or known targets
Identity Manager
SMS Interception
The system can intercept SMS of
Captured MS and control the status
notification (No notification\ Fail\ Success)
SMS Alerts
Once a specific identity is captured, the
system can send an SMS alert to specific
phone number.
Scheduler
Scheduler Cont...
Silent Call
The Gi2 activates the Targets
Handset as a Beacon. The
changing signal strength can
then be used for Direction
Finding
In combination with
the ICOM or
Spectrum Analyser
this is a very useful
tool for Homing
Target Isolator
The benefit of using the
Target Isolator is that it
moves the Target to a Clear
Channel thus allowing the
Target to remain captured
even while on the move.
GCRs
Call
Recipient
Target
Phone
(Dialing)
Real
Network
GCR
Kit
Eavesdropper
Eavesdropper allows the user to
listen to and record audio from a
Captured Targets Handset
Multilingual
Interface is available in
multiple Languages
Wireless LAN
802.11B
LAN
The End