Escolar Documentos
Profissional Documentos
Cultura Documentos
Certification
Tyfo SCH systems have been certified by Stress Engineering
Services (SES) per the requirements published by ASME
PCC-2, the ASME standard for repair of pressure equipment and
piping. This certification is based on structural, durability and
material testing and is unique to gas, liquid and process piping
applications. The application of the Tyfo SCH systems
is applicable to pipelines originally designed in accordance with
ASME B31.1, B31.3, B31.4 and B31.8 and ISO 15649 and 13623.
The Tyfo SCH systems were tested in compliance with ASME
PCC-2 and ISO 24817. Structural and durability testing included:
Static pressure test on control and strengthened specimen
Pressure cycle testing on control and strengthened specimen
Long-term shear strength and cathodic disbondment testing
Solution Tested
Product Result
Excellent
Hydrochloric acid
15%
Excellent
Gasoline
Excellent
Property
Test Method
Test Results
Toluene
Not recommended
Tensile strength
ASTM D3039
Xylene
Tensile modulus
ASTM D3039
Mineral spirits
Excellent
Water
Excellent
Hardness
ASTM D224/D2583
78-82 Shore D
Coefficient of thermal
expansion
ASTM E831
Warp (0C):
3.6 x 10-6 / F
Glass Transition
Temperature (Tg)
ASTM D831/E1640/
E6604
Weft (90C):
20.3 x 10-6 / F
Heat Distortion
Temperature (HDT)
ASTM D648
188F (87C)
ASTM D316/D5868
Structural
strengthening
Appendix III
Exceeded required
pressure of 3,182 psi
(220 bar) by 25% at
3,979 psi (274 bar)
Cathodic
disbondment
No blistering
observed
ASTM G8/G42/G95