Escolar Documentos
Profissional Documentos
Cultura Documentos
Software
Version 2.4.5673.1
Company:
Engineer:
Project:
Address:
Phone:
E-mail:
GAD AMBATO
Date:
ING. ALEX ALBUJA ESPINOSA
Page:
CENTRO COMERCIAL JUAN CAJAS
15/10/2016
1/4
1.Project information
Customer company:
Customer contact name:
Customer e-mail:
Comment:
Base Material
Concrete: Normal-weight
Concrete thickness, h (mm): 1300
State: Cracked
Compressive strength, fc (MPa): 24.13
c,V: 1.4
Reinforcement condition: A tension, A shear
Supplemental reinforcement: Not applicable
Reinforcement provided at corners: Yes
Do not evaluate concrete breakout in tension: No
Do not evaluate concrete breakout in shear: No
Ignore 6do requirement: No
Build-up grout pad: No
Base Plate
Length x Width x Thickness (mm): 600 x 600 x 30
Yield stress: 248.00 N/mm
Profile type/size: HSS16X16X5/8
<Figure 1>
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc.
5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com
Anchor Designer
Software
Version 2.4.5673.1
Company:
Engineer:
Project:
Address:
Phone:
E-mail:
GAD AMBATO
Date:
ING. ALEX ALBUJA ESPINOSA
Page:
CENTRO COMERCIAL JUAN CAJAS
15/10/2016
2/4
<Figure 2>
Recommended Anchor
Anchor Name: Heavy Hex Bolt - 3/4" Heavy Hex Bolt, F1554 Gr. 36
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc.
5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com
Company:
Engineer:
Project:
Address:
Phone:
E-mail:
Anchor Designer
Software
Version 2.4.5673.1
GAD AMBATO
Date:
ING. ALEX ALBUJA ESPINOSA
Page:
CENTRO COMERCIAL JUAN CAJAS
15/10/2016
3/4
Shear load x,
V uax (kN)
Shear load y,
V uay (kN)
1
2
3
4
5
6
7
8
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
-0.2
-0.2
-0.2
-0.2
-0.2
-0.2
-0.2
-0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Sum
0.0
-1.5
1.9
2.4
1.0
0.65
33.61
da (mm)
105
19
la
1.00
fc (MPa)
ca1 (mm)
V bx (kN)
24.13
125
24.49
A Vco (mm2)
140625
70313
Yec,V
0.983
Yed,V
0.900
Yc,V
1.400
Yh,V
1.000
V bx (kN)
24.49
f
0.75
fVcbgx (kN)
45.49
f
0.75
fVcbgy (kN)
45.65
da (mm)
105
19
la
1.00
fc (MPa)
ca1 (mm)
V by (kN)
24.13
125
24.49
A Vco (mm2)
140625
70313
Yec,V
0.986
Yed,V
0.900
Yc,V
1.400
Yh,V
1.000
V by (kN)
24.49
da (mm)
la
fc (MPa)
ca1 (mm)
V by (kN)
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc.
5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com
Company:
Engineer:
Project:
Address:
Phone:
E-mail:
Anchor Designer
Software
Version 2.4.5673.1
105
19
1.00
24.13
125
GAD AMBATO
Date:
ING. ALEX ALBUJA ESPINOSA
Page:
CENTRO COMERCIAL JUAN CAJAS
15/10/2016
4/4
24.49
A Vco (mm2)
140625
70313
Yec,V
1.000
Yed,V
1.000
Yc,V
1.400
Yh,V
1.000
V by (kN)
24.49
f
0.75
fVcbgx (kN)
102.87
f
0.75
fVcbgy (kN)
102.87
da (mm)
105
19
la
1.00
fc (MPa)
ca1 (mm)
V bx (kN)
24.13
125
24.49
A Vco (mm2)
140625
70313
Yec,V
1.000
Yed,V
1.000
Yc,V
1.400
Yh,V
1.000
V bx (kN)
24.49
A Nc (mm2)
A Nco (mm2)
2.0
500000
62500
Yec,N
0.955
11. Results
Interaction of Tensile and Shear Forces (Sec. D.7)
Factored Load, V ua (kN)
Shear
Steel
0.31
T Concrete breakout x1.52
T Concrete breakout y+ 1.90
|| Concrete breakout y0.58
|| Concrete breakout x0.72
Concrete breakout,
combined
Pryout
2.43
Yed,N
1.000
Yc,N
1.000
Ycp,N
1.000
Nb (kN)
37.53
f
0.70
fVcpg (kN)
401.59
33.61
45.49
45.65
102.87
102.87
-
Ratio
0.01
0.03
0.04
0.01
0.01
0.05
Status
Pass
Pass
Pass
Pass
Pass
Pass (Governs)
401.59
0.01
Pass
3/4" Heavy Hex Bolt, F1554 Gr. 36 with hef = 105 mm meets the selected design criteria.
12. Warnings
- Per designer input, ductility requirements for tension have been determined to be satisfied designer to verify.
- Per designer input, ductility requirements for shear have been determined to be satisfied designer to verify.
- Designer must exercise own judgement to determine if this design is suitable.
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc.
5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com