Escolar Documentos
Profissional Documentos
Cultura Documentos
INDUCTION LUMINAIRES
www.fulham.com
CANOPY
COBRAHEAD
4-6
7-11
SHOEBOX
28-31
TUNNEL LIGHTER
32-33
34-36
EXPLOSION PROOF
12-13
WALL PACK
FLOODLIGHT
14-16
MOUNTING OPTIONS
HIGHBAY
17-21
LINEAR HIGHBAY
22-23
IP RATING CHART
41
POST TOP
24-25
FREQUENTLY ASKED
QUESTIONS
42
SECURITY LIGHTER
26-27
WARRANTY
43
(323)
323 599
599-5000
5000
ACCESSORIES
37
38-40
The Induction Canopy Series can be used in a variety of commercial applications including parking
structures,
convenience
stores,
gas stations,
and
pharmacy
canopies.
The long
life
The Induction
Canopy
Series
can be banks
used in
a variety
of drive-thru
commercial
applications
including
and superior
lumen
maintenance
of
induction
significantly
reduce
maintenance
costs
and
provide
parking structures, convenience stores, gas stations, banks and pharmacy drive-thru acanopies.
considerable
the totallumen
cost ofmaintenance
ownership. of Induction significantly reduces maintenance
The longreduction
life and in
superior
APPLICATIONS
Parking Lots
APPLICATIONS
Parking
Structures
ParkingStores
Lots
Convenience
Parking Structures
Gas Stations
Banks Convenience Stores
GasDrive-Thru
Stations Canopies
Pharmacy
Banks
Intended
to Replace HID
Pharmacy Drive Thru Canopies
ELECTRICAL
ELECTRICAL
Universal
Voltage (120V
277V)
Universal
Voltage
High Power
Factor
(>.95)(120V 277V)
High
Power Factor
(>.95)
Ambient
Temperature
Rating:
-4F to 104F
Ambient
-20Cto
40C Temperature Rating: -20C to 40C
Input Frequency:
50/60 Hz
Input Frequency:
50/60 Hz
Constant
Wattage
WithThan
Less3%
Than
3% Variance
CONTACT FULHAM CLIENT SERVICES FOR:
Constant
Wattage
OutputOutput
With Less
Variance
Output
Frequency:
Luminaires with a full range of lamp color temperatures between 2700K 6500K
Operating
Frequency:
250250
kHzkHz
Generator
Type:PClass
1 Outdoor
Lamps specifically designed for use in extreme cold applications or environments
Generator
Type: Class
TypeP1Type
Outdoor
THD
%: < 10%
Dimming options
THD %:
<10%
Pre-Wired
Connector
Replacement components (generators & lamps) also sold separately
Pre-Wired
OutputOutput
Connector
(Plug and Play)
Color options for finish: Gray, Black, White, Dark Bronze, Green
Step Down Transformer Voltage: 347V/480V to 277V
CSA : 208V-347V
WARRANTY
CE : 208V-240V
Five-year limited warranty available for Induction Lighting System. See page 43.
fulham.com
www.fulham.com
CN01
CN01
CONSTRUCTION
CONSTRUCTION
Corrosion
Corrosion Resistant
Resistant Die
Die Cast
Cast Aluminum
Aluminum Housing
Low
Profile Design
Housing
Standard
Powder
Low Profile
DesignCoated Finish: Dark Bronze
Heat
and
UV
Resistant
Powder Coated
Finish: Prismatic
Dark Bronze
Lens
Polycarbonate
Heat and UV Resistant
Prismatic
Standard
Mounting
Polycarbonate
LensOption: Surface Mounted
OPTICS
Specular Generator
Polished Surface
Reflector
Finish
Separate
and Lamp
Compartment
is
Precision
Formed
Aluminumand
Reflector:
Engineered
for Reliability
Easy
Total Reflectivity of 87%
Maintenance
Glare Reduction
Lens
Universal
Mounting
Knockouts Allow for
Quick
Polycarbonate
Lens
and Straightforward
Installation
Type V Distribution
NOTE:
1
Consult
with your
salessales
representative
for lead
1
NOTE:
Consult
with your
representative
for time.
availability.
2
Application
option
is only
for the
70W,70W,
80W,80W
and 100W
2
Accessory
option
is available
only available
forCircular
the Circular
and 100W CN01.
PART NUMBERS
TYPE
TYPE
CN=CANOPY
PART NUMBERS
STEP DOWN
STEP DOWN
TRANSFORMER
35W-100W
SERIES
SERIES
01=01 SERIES
TRANSFORMER
FIREHORSE
35W-100W
HOTSPOT2
HH-ILS-SD1-125VA
FIREHORSE
2
DRIVER
HOTSPOT
LED CLUSTER
FHS5-AR-6W-CL
FHSBATT3-C3
FHSBATT3-D4
FHSBATT3-C3
FHSBATT3-F7(90min)
FHSBATT3-D4 (125min)
FHSBATT3-F7 (235min)
CN02
CN02
ACCESSORIES
ACCESSORIES
DESCRIPTION
PART NUMBERS
STEP DOWN
TRANSFORMER
35W-100W
WATTAGE
ORDERING OPTIONS
ORDERING OPTIONS
LAMP
C-CIRCULAR
WATTAGE
040=40W
B=BULB
C = CIRCULAR
070=70W
040
= 40W
070 = 70W
080=80W
080 = 80W
100 = 100W
100=100W
LENS
LENS
P=POLYCARBONATE
P = POLYCARBONATE
FHS1-UNV-3.6L
FHS5-AR-6W-CL
BATTERY OPTIONS
FHSBATT3-C3 (90min)
FHSBATT3-D4 (125min)
FHSBATT3-F7 (235min)
27=2700K
BLANK = 5000K
30=3000K
27 = 2700K
30 = 3000K
40=4000K
40 = 4000K
60 = 6000K
60=6000K
65 = 6500K
J = CSA1
65=6500K
MOUNTED
OPTICS
Separate Generator and Lamp Compartment
is
Specular
Polished
Surface Reflector
Engineered
for Reliability
and EasyFinish
Maintenance
Precision Formed Aluminum Reflector:
Reflectivity
of 87%
Total
Universal
Mounting
Knockouts Allow for
Quick
Glare Reduction
Lens
and Straightforward
Installation
Polycarbonate Lens
Type V Distribution
IP
IP RATING
RATING
IP43:
IP43: Suitable
Suitable for
for Damp
Damp Location
Location
NOTE:
NOTE: 1Consult with your sales representative for availability.
Consult
with your option
sales representative
forfor
lead
2
Accessory
is only available
thetime.
Circular 70W CN02.
2
Application option is only available for the Circular 70W, 80W, and 100W
1
TYPE
TYPE
CN = CANOPY
DRIVER
MOUNTED
OPTICS
Specular Reflector: Highly Polished Surface, Formed to Precision for a Total Reflectivity of 87%
Glare Reduction Lens
Polycarbonate Lens
SERIES
SERIES
01=01 SERIES
HH-ILS-SD1-125VA
LED CLUSTER
COLOR TEMP
BLANK=500K
Example: CN-01-C040-P (Canopy, 01 Series, Circular, 40W, Polycarbonate Lens, Surface Mounted, 5000K)
Example: CN-01-B085-P-E-60K (Canopy, 01 Series, Bulb, 85W, Polycarbonate Lens, Pendant Mounted, 6000K)
CN=CANOPY
FIREHORSE
HOTSPOT2
OPTIONS
MOUNTING
BLANK=SURFACE
E = PENDANT
MOUNTED1
085=85W
085 = 85W1
B = BULB
MOUNTING OPTIONS
BLANK = SURFACE
E=PENDANT
MOUNTED
CONSTRUCTION
CONSTRUCTION
Corrosion Resistant Die Cast Aluminum Housing
Corrosion Resistant Die Cast Aluminum Housing
Low Profile Design
Low Profile Design
Powder Coated Finish: Dark Bronze
Standard Powder Coated Finish: Dark Bronze
Standard Mounting Option: Surface Mounted
Standard Mounting Option: Surface Mounted
Heat and UV Resistant Prismatic
Heat and UV Resistant Prismatic
Polycarbonate Lens
Polycarbonate Lens
Universal Mounting Knockouts Allow for Quick
Universal Mounting Knockouts Allow for
and Straightforward Installation
Quick and Straightforward Installation
LAMP TYPE/WATTAGES
LAMP
Circular
Induction Lamp Available:
TYPE/WATTAGES
40W,
70W,
80W, 100W
Circular Induction
Lamps Available:
Bulb
Lamp Available: 85W1
40W,Induction
70W
LAMP
01 = 01 SERIES
FHS1-UNV-3.6L
FHS1-AR-6W-CL
BATTERY OPTIONS
BATTERY OPTIONS
CN = CANOPY
FHS1-UNV-3.6L
DRIVER
LED
CLUSTER
OPTICS
Specular Reflector: Highly Polished Surface, Formed to Precision for a Total Reflectivity of 87%
Glare Reduction Lens
Polycarbonate Lens
ACCESSORIES
DESCRIPTION
IP RATING
IP43: Suitable for Damp Location
02 = 02 SERIES
ORDERING OPTIONS
ORDERING OPTIONS
LAMP
WATTAGE
LENS
MOUNTING
LAMP
WATTAGE
LENS
MOUNTING OPTIONS
C-CIRCULAR
040=40W
P=POLYCARBONATE
BLANK=SURFACE
B=BULB
070=70W
C = CIRCULAR
040 = 40W
080=80W
070 = 70W
100=100W
085=85W
P = POLYCARBONATE
MOUNTED
BLANK
= SURFACE
MOUNTED
E=PENDANT
E = PENDANT
MOUNTED
MOUNTED1
COLOR TEMP
OPTIONS
BLANK=500K
BLANK
= 5000K
27=2700K
27 = 2700K
30 = 3000K
30=3000K
40 = 4000K
40=4000K
60 = 6000K
65 = 6500K
60=6000K
65=6500K
Example: CN-02-C040-P (Canopy, 02 Series, Circular, 40W, Polycarbonate Lens, Surface Mounted, 5000K)
Example: CN-02-C070-P-E-60 (Canopy, 02 Series, Circular, 70W, Polycarbonate Lens, Pendant Mounted, 6000K)
Actual performance
mayasdiffer
as aofresult
of end-user
environment
and application.
Specifications
to change
Actual performance
may differ
a result
end-user
environment
and application.
Specifications
subject subject
to change
without without
notice. notice.
323 599
5000
(323)
599-5000
CN03
OPTICS
Specular Polished Surface Reflector Finish
Precision Formed Aluminum Reflector:
Total Reflectivity of 87%
Glare Reduction Lens
Polycarbonate Lens
Type V Distribution
IP RATING
IP43: Suitable for Damp Location
ACCESSORIES
DESCRIPTION
PART NUMBERS
ORDERING OPTIONS
TYPE
SERIES
STEP DOWN
TRANSFORMER
35W-100W
HH-ILS-SD1-125VA
FIREHORSE
HOTSPOT2
DRIVER
FHS1-UNV-3.6L
LED CLUSTER
FHS5-AR-6W-CL
BATTERY OPTIONS
FHSBATT3-C3 (90min)
FHSBATT3-D4 (125min)
FHSBATT3-F7 (235min)
CN = CANOPY
03 = 03 SERIES
LAMP
WATTAGE
C = CIRCULAR
040 = 40W
055 = 55W
070 = 70W
080 = 80W1
B = BULB
035 = 35W1
055 = 55W1
LENS
P = POLYCARBONATE
MOUNTING
BLANK = SURFACE
MOUNTED
E = PENDANT
MOUNTED1
COLOR TEMP
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
Example: CN-03-C040-P (Canopy, 03 Series, Circular, 40W, Polycarbonate Lens, Surface Mounted, 5000K)
Example: CN-03-B55-P-E-60 (Canopy, 03 Series, Bulb, 55W, Polycarbonate Lens, Pendant Mounted, 6000K)
OPTICS
CONSTRUCTION
CN04
The Induction Canopy Series
can beResistant
used Die
in aCast
variety
ofHousing
commercial
applications
including
Specular
Polished Surface
Reflector Finish
Corrosion
Aluminum
Precision Formed Aluminum Reflector:
Low Profile Design
parking structures, convenience
stores, gas stations, banks and pharmacy
drive-thru canopies.
Total Reflectivity of 87%
Standard Powder Coated Finish: Gray
The long life and superior lumen
maintenance
of Induction significantly
reduces maintenance
Clear Polycarbonate
Lens or Clear
Heat and
UV Resistant Prismatic
Curved Glass Lens
Polycarbonate Lens
costs and provides a considerable
reduction
in
the
total
cost
of
ownership.
Type V Distribution
Universal Mounting Knockouts Allow for Quick
1
ELECTRICAL -
Universal
Voltage (120V 277V)
TUBULAR
INDUCTION
70W-High
150WPower Factor (>.95)
Ambient
Temperature Rating: -20C to 40C
MOUNTING
HEIGHT
8' to 20'
Input Frequency: 50/60 Hz
NOTE: 1Consult with your sales representative for availability.
Constant Wattage Output With Less Than 3% Variance
OutputACCESSORIES
Frequency: 250 kHz
DESCRIPTION
NUMBERS
Generator Type:PART
Class
P Type 1 Outdoor TYPE
SERIES
STEP
THDDOWN
%: < 10%
TRANSFORMER
Pre-Wired Output Connector
35W-100W
120W-200W
ORDERING OPTIONS
LAMP
WATTAGE
T = TUBULAR
070 = 70W
080 = 80W
100 = 100W
120 = 120W
150 = 150W
HH-ILS-SD1-125VA
HH-ILS-SD2-245VA
CN = CANOPY
04 = 04 SERIES
LENS
P = POLYCARBONATE
G = GLASS1
COLOR TEMP
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CS41
Z = CE1
Checksubject
with sales
representative
for availability.
Actual performance may differ as a result of end-user environment and application. Specifications
to change
without notice.
fulham.com
www.fulham.com
COBRAHEAD
COBRAHEAD
The Induction Cobrahead Series can be used in a variety of roadway lighting applications. All of the
luminaires
in thisCobrahead
Series operate
well can
in cold
with an
On/re-strike
capability and
The Induction
Series
betemperatures
used in a variety
of Instant
roadway
lighting applications.
are
use Induction
in wet locations
(IP65). Series
The long
life andwell
superior
lumen
maintenance
of induction
All suitable
fixtures for
in the
Cobrahead
operate
in cold
temperatures
with
an instant
significantly reduce maintenance costs and provide a considerable reduction in the total cost of ownership.
ON/re-strike capability and are suitable for use in wet locations (IP 65). The long life and superior lumen maintenance of Induction significantly reduces maintenance costs and provides a
considerable reduction in the total cost CHARACTERISTICS
of ownership.
APPLICATIONS
Freeways
Highways
APPLICATIONS Parking Lots
Freeways
Public Entrances
Highways
Off-Street Areas
Parking Lots
Roadway Lighting
Public Entrances
Intended to Replace HID
Off-Street Areas
Roadway Lighting
ELECTRICAL
Universal Voltage (120V 277V)
ELECTRICAL High Power Factor (>.95)
Universal Voltage (120V 277V)
Ambient Temperature Rating: -4F to 104F
High Power Factor (>.95)
-20C to 40C
Ambient Temperature Rating: -20C to 40C
Input Frequency: 50/60 Hz
Input Frequency: 50/60 Hz
Constant Wattage Output With Less Than 3% Variance
Constant Wattage Output With Less Than 3% Variance
Operating Frequency: 250 kHz
Output Frequency: 250 kHz
Generator Type: Class P Type 1 Outdoor
Generator Type: Class P Type 1 Outdoor
THD %: <10%
THD %: < 10%
Instant On
Instant On
No Noise Compared to HID Systems
No Noise Compared to HID Systems
No Lumen Output Variation Over a Wide Range of
No Variation Over a Wide Range of Temperatures
Temperatures and Through Voltage Fluctuations
and Through Voltage Fluctuations
Pre-Wired Output Connector (Plug and Play)
Constant Wattage Output With Less Than 3% Variance
CSA: 208V-347V
Pre-Wired Output Connector
CE: 208V-240V
fulham.com
(323)
323
599
599-5000
5000
CH01
CH01
DARK
SKY
FRIENDLY
CONSTRUCTION
CONSTRUCTION
Compact
Compact Structure
Structure, Corrosion Resistant
Standard
Powder Coated
Finish: Gray
Die Cast Aluminum
Alloy Housing
Corrosion
Resistant
Streamlined
Contour for High Wind Resistance
Adjustable
Die Cast Aluminum
Alloy
Housing
Projection
Angle
Streamlined
Contour
for High Wind Resistance
Sealed Die Cast
Generator
Adjustable
Projectionand
Angle
Separate Generator
Lamp Compartment
is
Sealed
Die Cast
Engineered
forGenerator
Reliability & Easy Maintenance
Separate
Generator
and 1.97-2.63
Lamp Compartment
Pole Mounted:
Diameter
for Reliability & Easy Maintenance
Engineered
Photocell (Optional)
Adjustable
Pole Mounted:
Diameter
1.97"-2.63"
Installation
Angle:
4-Step
Adjustable
Installation
Tempered Glass
Lens Angle: 4-Step
Gas-tight
Gas-tight Silicon
Silicon Rubber
Rubber Seal
Seal
Optional
Polycarbonate
Hydro-Formed
AluminumLens
Reflector
Preinstalled Photocell Receptacle
NOTE:
(Photocell
NOT
1
Consult with
yourincluded)
sales representative for lead time.
2
ACCESSORIES
ACCESSORIES
DESCRIPTION
DESCRIPTION
PART
PARTNUMBERS
NUMBERS
PHOTOCELL
(BLUE)
PHOTOCELL_BLUE
ILAPHCU
ILAPHCU
PHOTOCELL - 10
ILAPHCU10
CH02
CH02
40W - 100W
CIRCULAR
INDUCTION
BULB-INDUCTION
40W
100W
85W1
MOUNTING
HEIGHT
MOUNTING
10'
to 18' HEIGHT
8 to 15
CE WATTAGE OPTIONS
TYPE
SERIES
LAMP
WATTAGE
LENS
OPTIONS
G=GLASS
BLANK=500K
P=POLYCARBONATE
27=2700K
1
CH=COBRAHEAD
01=01
SERIES
T-TUBULAR
040=40W
NOTE:
Consult with
your
sales representative
for availability.
055=55W
ORDERING OPTIONS
CH = COBRAHEAD
SERIES
LAMP
01 = 01 SERIES
T = TUBULAR
070=70W
WATTAGE
080=80W
040 = 40W
100=100W
055 = 55W
070 = 70W
120=120W
080 = 80W
100 = 100W
150=150W
120 = 120W
150 = 150W
200=200W
200 = 200W
250 = 250W
250=250W
LENS
G = GLASS
P = POLYCARBONATE
OPTICS
LAMP TYPE/WATTAGES
Circular
Clear Flat
Tempered
Glass
Lens
Induction
Lamp
Available:
40W,
High Reflectivity
70W, 80W, Vacuum
100W Coated
Inner Surface Finish
IPSymmetric
RATING Hydroformed Aluminum Reflector
Type
Distribution
IP43: VSuitable
for Damp Location
IP RATING
IP65: Suitable for Wet Location
CE WATTAGE OPTIONS
CE: 40W, 70W, 80W,100W
ORDERING
OPTIONS
ORDERING
OPTIONS
SERIES
TYPE
SERIES
CH=COBRAHEAD 02=02 SERIES
LAMP
LAMP
C-CIRCULAR
WATTAGE
WATTAGE
040=40W
LENS
LENS
G=GLASS
070=70W
ACCESSORIES
ACCESSORIES
PART NUMBERS
PHOTOCELL (BLUE)
ILAPHCU
PHOTOCELL - 10
ILAPHCU10
60=6000K
BLANK
= 5000K
27 = 2700K
65=6500K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
Z = CE1
NOTE:
1
Consult with your sales representative for lead time.
2
Application option is only available for the Circular 70W, 80W, and 100W
NOTE: 1Consult with your sales representative for availability.
TYPE
DESCRIPTION
30=3000K
COLOR TEMP
40=4000K
Example:CH-01-T040-G
CH-01-T040-G(Cobrahead,
(Cobrahead,0101Series,
Series,Tubular,
Tubular,40W,
40W,Glass
GlassLens,
Lens,5000K)
5000K)
Example:
Example:
Example:CH-01-T250-P-60
CH-01-T250-P-60(Cobrahead,
(Cobrahead,0101Series,
Series,Tubular,
Tubular,250W,
250W,Polycarbonate
PolycarbonateLens,
Lens,6000K)
6000K)
CONSTRUCTION
CONSTRUCTION
Compact
CompactStructure,
Structure Corrosion Resistant
Die
Cast Aluminum
Alloy Housing
Standard
Powder Coated
Finish: Gray
Stainless
Screw and Clamp
CorrosionSteel
Resistant
Aluminum
Reflector Alloy Housing
Die Cast Aluminum
Curved
Tempered
Glassand
Lens
Stainless
Steel Screw
Clamp
Gas-tight
Gas-tightSilicon
SiliconRubber
RubberSeal
Seal
Pole
PoleMounted:
Mounted:Diameter
Diameter1.50-2.36
1.50"-2.36"
Photocell
(Optional)
Preinstalled
Photocell Receptacle
(Photocell NOT included)
OPTICS
Clear Curved Tempered Glass Lens
LAMP TYPE/WATTAGES
Vacuum Coated Aluminum Reflector
Circular Induction Lamps Available:
40W, 70W, 80W, 100W
IP RATING
IP65: Suitable for Wet Location
ORDERING OPTIONS
TYPE
TUBULAR INDUCTION
40W - 250W
MOUNTING HEIGHT
12' to 40'
OPTICS
OPTICS
Clear
Tempered
Glass
Lens
ClearFlat
Tempered
Glass
Lens
or
Curved
Polycarbonate
Lens
High
Purity
Hydro-Formed
Aluminum Reflector
High Reflectivity Vacuum Coated
Inner Surface Finish
IP RATING Hydroformed Aluminum Reflector
Symmetric
IP65:
Suitable for Wet Location
Type
II Distribution
CE: and
40W,
55W, 70W, 80W, 100W,
Application option is only available for the Circular 70W,80W,
100W
LAMP
TYPE/WATTAGES
LAMP
TYPE/WATTAGES
Tubular
TubularInduction
InductionLamps
LampAvailable:
Available:40W,
40W,55W,
55W,
70W,
70W,80W,
80W,100W,
100W,120W,
120W,150W,
150W,200W,
200W,250W
250W
CH = COBRAHEAD
02 = 02 SERIES
040 = 40W
080=80W
070 = 70W
C = CIRCULAR
080 = 80W
100=100W
100 = 100W
G = GLASS
OPTIONS
COLOR TEMP
BLANK=500K
BLANK = 5000K
27=2700K
27 = 2700K
30=3000K
30 = 3000K
40 = 4000K
40=4000K
60 = 6000K
65 = 6500K
60=6000K
Z = CE1
65=6500K
Actual performance
mayasdiffer
as aofresult
of end-user
environment
and application.
Specifications
to change
Actual performance
may differ
a result
end-user
environment
and application.
Specifications
subject subject
to change
without without
notice. notice.
CH03
CONSTRUCTION
Compact Structure
Standard Powder Coated Finish: Gray
Corrosion Resistant
Die Cast Aluminum Alloy Housing
Seal Die Cast Generator
Hydro-Formed Aluminum Reflector
Tempered Glass Lens
Gas-tight Silicon Rubber Seal
Pole Mounted: Diameter 1.97"
OPTICS
Clear Tempered Glass Lens
High Reflectivity Vacuum Coated
Inner Surface Finish
Symmetric Hydroformed Aluminum Reflector
Type V Distribution
IP RATING
IP65: Suitable for Wet Location
LAMP TYPE/WATTAGES
Circular Induction Lamps Available:
40W, 70W, 80W
Bulb Induction Lamp Available: 55W1
ORDERING OPTIONS
TYPE
SERIES
CH = COBRAHEAD
03 = 03 SERIES
LAMP
WATTAGE
B = BULB
055 = 55W
C = CIRCULAR
040 = 40W
070 = 70W
080 = 80W
LENS
COLOR TEMP
G = GLASS
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
Example: CH-03-C040-G (Cobrahead, 03 Series, Circular, 40W, Lamp with Glass Lens)
Example: CH-03-C080-G-60 (Cobrahead, 03 Series, Circular, 80W, Glass Lens, 6000K)
CONSTRUCTION
OPTICS
CH04
The Induction Canopy Series Compact
can beStructure
used in a variety of commercial
applications
including
Polycarbonate
Lens
High
Reflectivity Vacuum
Coatedcanopies.
Standard
Powder
Coated
Finish: Gray
parking structures, convenience
stores,
gas
stations,
banks and
pharmacy
drive-thru
Inner Surface Finish
Corrosion Resistant
The long life and superior lumen
maintenance
of Induction significantly
reduces maintenance
Die Cast
Aluminum Alloy Housing
Symmetric Hydroformed
Aluminum Reflector
ownership.
Type V Distribution
Seal Diereduction
Cast Generator
costs and provides a considerable
in
the
total
cost
of
Hydro-Formed Aluminum Reflector
APPLICATIONS Parking Lots
Parking Structures
Convenience Stores
Gas Stations
Banks
Pharmacy Drive Thru Canopies
IP RATING
Polycarbonate Lens
CHARACTERISTICS IP65: Suitable for Wet Location
Gas-tight Silicon Rubber Seal
Low Lumen Depreciation, >70% at 60,000 Hours
Pole Mounted: Diameter 1.97"
Standard Kevin Temperature is 5000K: Provides a Cooler Temperature
Wide Range of Color Temperature Options Available: 2720K 6500K1
LAMP TYPE/WATTAGES
Pre-Wired Input Connector
Circular Induction Lamps Available:
40W, 70W, 80W
COMPLIANCE Bulb Induction Lamp Available: 55W1
UL listed UL 1598 (E363375)
cUL listed UL 1598 (E363375)
FCC Part 18-A
Surge Immunity IEC 61000-4-5: Class 4
THD
%:
<
10%
BULB INDUCTION
B = BULB
055 = 55W
55W1 Pre-Wired Output Connector
MOUNTING HEIGHT
10' to 18'
CH = COBRAHEAD
04 = 04 SERIES
C = CIRCULAR
040 = 40W
070 = 70W
080 = 80W
LENS
COLOR TEMP
P = POLYCARBONATE
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
Example: CH-04-C040-P (Cobrahead, 04 Series, Circular, 40W, Lamp with Polycarbonate Lens)
Example: CH-04-C080-P-65 (Cobrahead, 04 Series, Circular, 80W, Lamp with Polycarbonate Lens, 6500K)
Checksubject
with sales
representative
for availability.
Actual performance may differ as a result of end-user environment and application. Specifications
to change
without notice.
fulham.com
(323)
323
599
599-5000
5000
CH05
DARK
SKY
FRIENDLY
CONSTRUCTION
Compact Structure
Corrosion Resistant
Standard Powder Coated Finish: Gray
Die Cast Aluminum Alloy Housing
Profile Generator
Gas-tight Silicon Rubber Seal
Stainless Steel Screw and Cap
Pole Mounted: Diameter 1.5"-2.36"
Preinstalled Photocell Receptacle
(Photocell NOT included)
OPTICS
Clear Curved Tempered Glass Lens
High Reflectivity Vacuum Coated
Inner Surface Finish
Symmetric Hydroformed Aluminum Reflector
Type V Distribution
IP RATING
IP65: Suitable for Wet Location
LAMP TYPE/WATTAGES
Circular Induction Lamps Available:
40W, 70W
ORDERING OPTIONS
TYPE
SERIES
LAMP
WATTAGE
ACCESSORIES
DESCRIPTION
PART NUMBERS
PHOTOCELL (BLUE)
ILAPHCU
PHOTOCELL - 10
ILAPHCU10
CH06
CH = COBRAHEAD
05 = 05 SERIES
C = CIRCULAR
COLOR TEMP
G = GLASS
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
DARK
SKY
FRIENDLY
CONSTRUCTION
Corrosion Resistant
Standard Powder Coated Finish: Gray
Die Cast Aluminum Alloy Housing
Profile Generator
Gas-tight Silicon Rubber Seal
Pole Mounted: Diameter 2.63"
OPTICS
Tempered Glass Lens: Up to 90%
Light Transmission Rate
High Reflectivity Vacuum Coated
Inner Surface Finish
Symmetric Hydroformed Aluminum Reflector
Type II Distribution
LAMP TYPE/WATTAGES
Tubular Induction Lamps Available:
70W, 80W, 100W, 120W,150W
IP RATING
IP65: Suitable for Wet Location
040 = 40W
070 = 70W
LENS
ORDERING OPTIONS
TYPE
CH = COBRAHEAD
SERIES
06 = 06 SERIES
LAMP
WATTAGE
T = TUBULAR
070 = 70W
080 = 80W
100 = 100W
120 = 120W
150 = 150W
LENS
COLOR TEMP
G = GLASS
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
10
10
CH07
CONSTRUCTION
Slim Structure
Corrosion Resistant
Standard Powder Coated Finish: Gray
Die Cast Aluminum Alloy Housing
Streamlined Contour for High Wind Resistance
Sealed Die Cast Generator
Gas-tight Silicon Rubber Seal
Generator Directly Mounted to Housing for
Reliability and Easy Maintenance
Pole Mounted: Diameter 1.50"-2.36"
Preinstalled Photocell Receptacle
(Photocell NOT included)
OPTICS
Clear Flat Tempered Glass Lens
High Reflectivity Vacuum Coated
Inner Surface Finish
Symmetric Hydroformed Aluminum Reflector
Type II Distribution
IP RATING
IP65: Suitable for Wet Location
CE/CSA WATTAGE OPTIONS
CE: 200W, 250W
CSA: 100W, 150W, 200W, 250W
LAMP TYPE/WATTAGES
Tubular Induction Lamps Available:
70W, 80W, 100W, 120W, 150W, 200W, 250W
TUBULAR INDUCTION
70W - 250W
MOUNTING HEIGHT
12' to 40'
ACCESSORIES
DESCRIPTION
PART NUMBERS
PHOTOCELL (BLUE)
ILAPHCU
PHOTOCELL - 10
ILAPHCU10
CH08
SERIES
CH = COBRAHEAD
07 = 07 SERIES
LAMP
WATTAGE
T = TUBULAR
070 = 70W
080 = 80W
100 = 100W
120 = 120W
150 = 150W
200 = 200W
250 = 250W
LENS
COLOR TEMP
G = GLASS
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
Z = CE1
CONSTRUCTION
Slim Structure
Corrosion Resistant
Standard Powder Coated Finish: Gray
Die Cast Aluminum Alloy Housing
Streamlined Contour for High Wind Resistance
Sealed Die Cast Generator
Gas-tight Silicon Rubber Seal
Generator Directly Mounted to Housing
for Reliability and Easy Maintenance
Pole Mounted: Diameter 1.50"-2.36"
Preinstalled Photocell Receptacle
(Photocell NOT included)
OPTICS
Clear Curved Polycarbonate Lens
High Reflectivity Vacuum Coated
Inner Surface Finish
Symmetric Hydroformed Aluminum Reflector
Type II Distribution
IP RATING
IP65: Suitable for Wet Location
CE/CSA WATTAGE OPTIONS
CE: 200W, 250W
CSA: 150W, 200W, 250W
LAMP TYPE/WATTAGES
Tubular Induction Lamps Available:
120W, 150W, 200W, 250W
ACCESSORIES
DESCRIPTION
PART NUMBERS
PHOTOCELL (BLUE)
ILAPHCU
PHOTOCELL - 10
ILAPHCU10
SERIES
CH = COBRAHEAD
08 = 08 SERIES
LAMP
T = TUBULAR
WATTAGE
120 = 120W
150 = 150W
200 = 200W
250 = 250W
LENS
COLOR TEMP
P = POLYCARBONATE
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
Z = CE1
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
(323)
323 599
599-5000
5000
11
11
NOTE:
Consult with your sales representative for lead time.
2
Application option is only available for the Circular 70W, 80W, and 100W
1
ORDERING OPTIONS
CIRCULAR INDUCTION
40W - 80W
BULB INDUCTION
55W
MOUNTING HEIGHT
10' to 18'
TYPE
SERIES
ACCESSORIES
DESCRIPTION
PART NUMBERS
PHOTOCELL_BLUE
ILAPHCU
LAMP
WATTAGE
LENS
OPTIONS
C-CIRCULAR
040=40W
G=GLASS
BLANK=500K
055=55W
27=2700K
070=70W
30=3000K
080=80W
40=4000K
60=6000K
65=6500K
The Induction Explosion Proof Series can be used in environments in which hazardous dust or vapors may
APPLICATIONS
Generator Stations
Steel Working Facilities
Water Treatment Plants
Other Buildings
PROFILE INDUCTION GENERATOR
Intended to Replace HID
TUBULAR INDUCTION
ELECTRICAL
70W
- 150W
MOUNTING
HEIGHT
Universal
Voltage (120V 277V)
10'
to 25'
High
Power Factor (>.95)
CHARACTERISTICS
Low Lumen Depreciation: >70% Lumen Maintenance at 60,000 Hours
Standard Kevin Temperature is 5000K: Provides a Cooler Color Temperature
Wide Range of Color Temperature Options Available: 2700K 6500K1
NOTE:
Pre-Wired Input Connector
1
Consult with your
sales
representative for lead time.
CRI
> 80
2
Application option
is only available
for the
Circular 70W,
80W, and 100W
Vibration
and Shock
Resistant:
No Filament
COMPLIANCE
UL listed UL 1598 (E363375)
cUL listed UL 1598 (E363375)
FCC Part 18-A
Surge Immunity IEC 61000-4-5: Class 4
CONTACT FULHAM CLIENT SERVICES FOR:
Luminaires with a full range of lamp color temperatures between 2700K 6500K
Lamps specifically designed for use in extreme cold applications or environments
Dimming options
Replacement components (generators & lamps) also sold separately
Color options for finish: Gray, Black, White, Dark Bronze, Green
WARRANTY
Five-year limited warranty available for Induction Lighting System. See page 43.
1
12
fulham.com
www.fulham.com
EP01
OPTICS
Prismatic Tempered Glass Lens
High Reflectance Aluminum Housing
Type V Distribution
CONSTRUCTION
Die Cast Aluminum Housing
Corrosion Resistant Coating
Standard Powder Coated Finish: Gray
Aluminum Finish
Prismatic Glass Lens
Pendant Mount
IP RATING
IP65: Suitable for Wet Location
LAMP TYPE/WATTAGES
Circular Induction Lamps Available:
70W, 80W
NOTE: See spec sheet or contact Fulham for class/division rating information.
ORDERING OPTIONS
TYPE
SERIES
EP = EXPLOSION
PROOF
01 = 01 SERIES
LAMP
C = CIRCULAR
WATTAGE
070 = 70W
080 = 80W
LENS
G = GLASS
MOUNTING
COLOR TEMP
E = PENDANT MOUNTED
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
Example: EP-01-C070-G-E (Explosion Proof, 01 Series, Circular, 70W, Glass Lens, Pendant Mounted, 5000K)
Example: EP-01-C080-G-E-60 (Explosion Proof, 01 Series, Circular, 80W, Glass Lens, Pendant Mounted, 6000K)
Actual performance
mayasdiffer
as aofresult
of end-user
environment
and application.
Specifications
to change
Actual performance
may differ
a result
end-user
environment
and application.
Specifications
subject subject
to change
without without
notice. notice.
323 599
5000
(323)
599-5000
13
NOTE:
Consult with your sales representative for lead time.
2
Application option is only available for the Circular 70W, 80W, and 100W
1
ORDERING OPTIONS
CIRCULAR INDUCTION
40W - 80W
BULB INDUCTION
55W
MOUNTING HEIGHT
10' to 18'
TYPE
SERIES
ACCESSORIES
DESCRIPTION
PART NUMBERS
PHOTOCELL_BLUE
ILAPHCU
LAMP
WATTAGE
LENS
OPTIONS
C-CIRCULAR
040=40W
G=GLASS
BLANK=500K
055=55W
27=2700K
070=70W
30=3000K
080=80W
40=4000K
60=6000K
65=6500K
The Induction Floodlight Series can be used in a variety of applications including billboards, parking lots,
CONSTRUCTION LAMP TYPE/WATTAGES area lighting, tennis courts, scenic
lighting,
and
industrial
It features
a fully
adjustable
Powder
Coated
Finish,
Corrosionenvironments.
Resistant
Tubular
Induction Lamp
Available:
mounting bracket, which allows the
to be aimed
and directed where
needed
most,
and a die cast
Dielight
Cast Aluminum
Alloy Housing
70W,it's
80W,
100W, 120W,
150W
Profile Generator
aluminum housing that provides superior
corrosion resistance. All luminaires in the Induction Floodlight
Hydro-Formed Aluminum Reflector
OPTICS Collection operate well in cold temperatures
with
capability
and Up
areto suitable
for
Tempered Glass
Lensan Instant On/re-strike
Tempered
Glass Lens:
90%
Gas-tight
Siliconsuperior
Rubber Seal
Light Transmission
Ratesignificantly reduce
use in wet locations (IP65). The long
life and
lumen maintenance
of induction
Mounted: Diameter 2.63
High Purity Hydro-Formed Aluminum Reflector
maintenance costs and provide a Pole
considerable
reduction in the total cost
of ownership.
CH06
APPLICATIONS
Billboards
Parking Lots
Area Lighting
Scenic Lighting
INDUCTION
GENERATOR
PROFILE
Industrial
Applications
Tennis Courts
TUBULAR INDUCTION
70W
Intended
to Replace HID
- 150W
ORDERING OPTIONS
COMPLIANCE
MOUNTING HEIGHT
ELECTRICAL
TYPE
SERIES
LAMP
WATTAGE
LENS
OPTIONS
UL
listed
UL
1598
(E363375)
to 25'
10'
Universal
Voltage (120V 277V)
cULSERIES
listed T-TUBULAR
UL 1598 (E363375)
CH=COBRAHEAD 06=06
070=70W
G=GLASS
BLANK=500K
High Power Factor (>.95)
FCC Part 18-A
080=80W
27=2700K
Ambient Temperature Rating: -4F to 104F
Surge Immunity IEC 61000-4-5: Class 4
100=100W
30=3000K
-20C to 40C
CSA/CE: Refer to Product's CSA/CE Wattage Options
ACCESSORIES
Input Frequency:
50/60 Hz
120=120W
40=4000K
Constant
Wattage Output
With Less Than 3% Variance
DESCRIPTION
PART NUMBERS
CONTACT FULHAM CLIENT
SERVICES
FOR:
150=150W
60=6000K
Operating Frequency: 250 kHz
Luminaires with a full range of lamp color temperatures between
2700K 6500K
PHOTOCELL_BLUE
65=6500K
Generator
Type: ClassILAPHCU
P Type 1 Outdoor
Lamps specifically designed for use in extreme cold applications or environments
THD %: <10%
Example: CH-06-T070-G
Dimming(Cobrahead,
options 06 Series, Tubular, 70W, Glass Lens, 5000K)
Instant On
Example: CH-06-T150-G-60
(Cobrahead,
06 Series,
Tubular,&150W,
Glass
Replacement
components
(generators
lamps)
alsoLens,
sold6000K)
separately
No Noise Compared to HID Systems
Color options for finish: Gray, Black, White, Dark Bronze, Green
No Lumen Output Variation Over a Wide Range of
Temperatures and Through Voltage Fluctuations
WARRANTY
Pre-Wired Output Connector (Plug and Play)
Five-year limited warranty available for Induction Lighting System. See page 43.
CSA: 208V-347V, CE: 208V-240V
Check with sales representative for availability.
1
14
fulham.com
www.fulham.com
FL01
CONSTRUCTION
Corrosion Resistant
Die Cast Aluminum Alloy Housing
Standard Powder Coated Finish: Dark Bronze
Universal Mounting Bracket
Separate Generator and Lamp
Compartment Engineered for Reliability
and Easy Maintenance
Gas-tight Silicon Rubber Seal
LAMP TYPE/WATTAGES
Tubular Induction Lamps Available:
70W, 80W, 100W
OPTICS
Hammertone Aluminum Reflector Finish
Precision Formed Anodized Reflector
Flat Tempered Glass Lens
Type V Distribution
IP RATING
IP65: Suitable for Wet Location
CE/CSA WATTAGE OPTIONS
CE: 70W, 80W, 100W
CSA: 70W, 80W, 100W
ORDERING OPTIONS
TYPE
FL =
FLOODLIGHT
SERIES
01 = 01 SERIES
LAMP
T = TUBULAR
WATTAGE
070 = 70W
080 = 80W
100 = 100W
LENS
G = GLASS
LIGHT DIRECTION
COLOR TEMP
BLANK = DOWNWARD
U = UPWARD
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
Z = CE1
Example: FL-01-T070-G (Floodlight, 01 Series, Tubular, 70W, Glass Lens, Downward Lighting, 5000K)
Example: FL-01-T100-G-U-60 (Floodlight, 01 Series, Tubular, 100W, Glass Lens, Upward Lighting, 6000K)
FL02
CONSTRUCTION
Corrosion Resistant
Die Cast Aluminum Alloy Housing
Standard Powder Coated Finish: Black
Universal Mounting Bracket
Separate Generator and Lamp
Compartment Engineered for Reliability
and Easy Maintenance
Gas-tight Silicon Rubber Seal
LAMP TYPE/WATTAGES
Tubular Induction Lamps Available:
120W1, 150W, 200W
OPTICS
Specular Polished Surface Reflector Finish
Precision Formed Anodized Finish
Flat Tempered Glass Lens
Type V Distribution
IP RATING
IP65: Suitable for Wet Location
CE/CSA WATTAGE OPTIONS
CE: 120W, 150W, 200W
CSA: 120W, 150W, 200W
ORDERING OPTIONS
TYPE
FL =
FLOODLIGHT
SERIES
02 = 02 SERIES
LAMP
T = TUBULAR
WATTAGE
120 = 120W1
150 = 150W
200 = 200W
LENS
G = GLASS
LIGHT DIRECTION
COLOR TEMP
BLANK = DOWNWARD
U = UPWARD
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
Z = CE1
Example: FL-02-T120-G (Floodlight, 02 Series, Tubular, 120W, Glass Lens, Downward Lighting, 5000K)
Example: FL-02-T200-G-U-60 (Floodlight, 02 Series, Tubular, 200W, Glass Lens, Upward Lighting, 6000K)
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
323 599
5000
(323)
599-5000
15
FL03
CONSTRUCTION
Compact Structure
Corrosion Resistant
Die Cast Aluminum Alloy Housing
Low Profile Design
Standard Powder Coated Finish: Dark Bronze
Gas-tight Silicon Rubber Seal
Slip Fitter Round Pole,
Optional U Shape Bracket
LAMP TYPE/WATTAGES
Tubular Induction Lamps Available:
40W1, 70W1, 80W1, 100W1, 120W,
150W, 200W, 250W
OPTICS
Clear Tempered Glass Lens
Hammertone Aluminum Reflector Finish
Precision Formed Anodized Reflector
Type V Distribution
IP RATING
IP65: Suitable for Wet Location
CSA WATTAGE OPTIONS
CSA: 40W, 70W, 80W, 100W
ORDERING OPTIONS
TYPE
FL =
FLOODLIGHT
SERIES
03 = 03 SERIES
LAMP
WATTAGE
T = TUBULAR
040 = 40W1
070 = 70W1
080 = 80W1
100 = 100W1
120 = 120W
150 = 150W
200 = 200W
250 = 250W
LENS
G = GLASS
MOUNTING
I = SLIPFITTER
(ROUND POLE)
V = SWIVEL
BRACKET1
COLOR TEMP
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
Example: FL-03-T040-G-I (Floodlight, 03 Series, Tubular, 40W, Glass Lens, Slipfitter (Round Pole), 5000K)
Example: FL-03-T250-G-V-60 (Floodlight, 03 Series, Tubular, 250W, Glass Lens, Swivel Bracket, 6000K)
Checksubject
with sales
representative
for availability.
Actual performance may differ as a result of end-user environment and application. Specifications
to change
without notice.
16
fulham.com
www.fulham.com
HIGHBAY
The Induction Highbay Series can be used in a variety of applications including manufacturing
facilities, gymnasiums, warehouses, exhibition halls, industrial environments, and commercial
environments. It provides a soft light with no glare or flickering, and operates well in cold
temperatures with an Instant On/re-strike capability. The long life and superior lumen
maintenance of induction significantly reduce maintenance costs and provide a considerable
reduction in the total cost of ownership.
CHARACTERISTICS
Low Lumen Depreciation: >70% Lumen Maintenance at 60,000 Hours
Standard Kevin Temperature is 5000K: Provides a Cooler Color Temperature
Wide Range of Color Temperature Options Available: 2700K 6500K1
Pre-Wired Input Connector
CRI > 80
Vibration and Shock Resistant: No Filament
APPLICATIONS
Manufacturing
Gymnasiums
Warehouses
Exhibition Halls
Large Area Retail
Industrial Environments
Intended to Replace HID
ELECTRICAL
Universal Voltage (120V 277V)
High Power Factor (>.95)
Ambient Temperature Rating: -4F to 104F
-20C to 40C
Input Frequency: 50/60 Hz
Constant Wattage Output With Less Than 3% Variance
Operating Frequency: 250 kHz
Generator Type: Class P Type 1 Outdoor
THD %: <10%
Instant On
No Noise Compared to HID Systems
No Lumen Output Variation Over a Wide Range of
Temperatures and Through Voltage Fluctuations
Pre-Wired Output Connector (Plug and Play)
Step Down Transformer Voltage: 347V/480V to 277V
CSA: 208V-347V, CE: 208V-240V
17
COMPLIANCE
UL listed UL 1598 (E363375)
cUL listed UL 1598 (E363375)
FCC Part 18-A
Surge Immunity IEC 61000-4-5: Class 4
CSA/CE: Refer to Product's CSA/CE Wattage Options
CONTACT FULHAM CLIENT SERVICES FOR:
Luminaires with a full range of lamp color temperatures between 2700K 6500K
Lamps specifically designed for use in extreme cold applications or environments
Dimming options
Replacement components (generators & lamps) also sold separately
Color options for Finish: Gray, Black, White, Dark Bronze, Green
WARRANTY
Five-year limited warranty available for Induction Lighting System. See page 43.
1
fulham.com
(323)
323
599
599-5000
5000
17
17
BASIC
BASIC COLLECTION
COLLECTION -- HIGHBAY
COBRAHEAD
SERIES
SERIES
HB01
CH07
CONSTRUCTION CONSTRUCTION
Polycarbonate
Slim
Structure, Refractor
Corrosion Resistant
(High
Temperature
Die
Cast
Aluminum Resistance)
Alloy Housing
Disc Generator
Externally
(IP43),
Streamlined
Contour
for HighMounted
Wind Resistance
Powder
Coated
White
(Standard)
Sealed Die Cast Generator
Clear PrismaticAluminum
Polycarbonate
Lens
Hydro-Formed
Reflector
(Available(Optional)
Without Lens Upon Request)
Photocell
Pendant Mount or Hook
OPTICS
LAMP
TYPE/WATTAGES Clear Induction
Prismatic Lamp
Polycarbonate
for
Tubular
Available:Refractor
70W, 80W,
Horizontal,
Vertical,
and 250W
Up-light Illumination
100W,
120W, 150W,
200W,
Type V Distribution
OPTICS IP RATING
Clear
Curved Tempered Glass Lens
IP20:
For Hydro-Formed
use in Dry Locations
OnlyReflector
High
Purity
Aluminum
CSA:
200W,
250W
Directly
Mounted
to Housing for Reli1
1
70W1and
, 80W
, 100W
, 120W, 150W,
ability
Easy
Maintenance
200W,
250W, 300W
Pole
Mounted:
Diameter 1.50-2.36
NOTE:
Consult with your sales representative for lead time.
2
Application option is only available for the Circular 70W, 80W, and 100W
1
ORDERING OPTIONS
CIRCULAR
TUBULAR INDUCTION
INDUCTION
70W
20W- -300W
250W
MOUNTING
MOUNTINGHEIGHT
HEIGHT
8'12'
to to
40'40'
TYPE
SERIES
LAMP
WATTAGE
1
NOTE:
Consult with
your
sales representative
for availability.
CH=COBRAHEAD
07=07
SERIES
T=TUBULAR
070=70W
ORDERING OPTIONS
WATTAGE
PART NUMBERS
35W-100W
STEP DOWN
120W-200W
ACCESSORIES
TRANSFORMER
250W-400W
HH-ILS-SD1-125VA
HH-ILS-SD2-245VA
HH-ILS-SD3-460VA
DESCRIPTION
STEP DOWN
TRANSFORMER
PHOTOCELL_BLUE
HOUSING KIT
OPTIONS
BLANK=500K
080=80W
ACCESSORIES
DESCRIPTION
LENS
G=GLASS
TYPE
SERIES
100=100W
WATTAGE
120=120W
070 = 70W1
080150=150W
= 80W1
100 = 100W1
200=200W
LAMP
PART NUMBERS
DISC
HHILPQ32840
GENERATOR
ILAPHCU
WIRE GUARD
150W
200W
250W
300W
ILASGAL
HIGHBAY
PERFORMANCE
REFLECTOR
150W
200W
250W
HHILPF00020
HB02
CH08
HB = HIGHBAY
Example:
Example:
01 = 01 SERIES
BLANK = NO LENS
P = POLYCARBONATE
30=3000K
SIZE OF REFRACTOR
40=4000K
16"
60=6000K
16"
16"
65=6500K
C = CIRCULAR
120 = 120W
22"
250=250W
150 = 150W
22"
200 = 200W
BLANK = NO LENS
22"
CH-07-T070-G (Cobrahead, 07250
Series,
Tubular,
70W,
Glass
Lens,
5000K)
= 250W
P = POLYCARBONATE
22"
300
=
300W
CH-07-T250-G-60 (Cobrahead, 07 Series, Tubular, 250W, Glass Lens,22"
6000K)
COLOR TEMP
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
Z = CE1
Example: HB-01-C070-16 (Highbay, 01 Series, Circular, 70W, No Lens, 16" Refractor, 5000K)
Example: HB-01-C300-P-22-60 (Highbay, 01 Series, Circular, 300W, Polycarbonate Lens, 22" Refractor, 6000K)
CONSTRUCTION Aluminum
Housing
Slim
Structure,
Corrosion Resistant
DiscCast
Generator
Externally
Mounted (IP43),
Die
Aluminum
Alloy Housing
Powder Coated
Whitefor
(Standard)
Streamlined
Contour
High
Wind
Aluminum
Finish
Resistance
Clear Prismatic
Lens
Sealed
Die CastAcrylic
Generator
(Available Without
Lens Upon
Request)
Hydro-Formed
Aluminum
Reflector
Pendant MountLens
or Hook
Polycarbonate
TYPE/WATTAGES
LAMP
Gas-tight
Silicon Rubber Seal
Circular Induction
Available:
Generator
Directly Lamps
Mounted
to Housing
250W,
300W,and
400W
for
Reliability
Easy Maintenance
Pole Mounted: Diameter 1.50-2.36
Photocell (Optional)
LENS
27=2700K
OPTICS
LAMP
TYPE/WATTAGES High Reflectance
Aluminum
Housing
Tubular
Induction Lamp
Available:
Acrylic
Lens200W, 250W
120W,
150W,
Type V Distribution
OPTICS IP RATING
Clear
Polycarbonate Lens
IP43:
Suitable
for Damp Aluminum
Location Reflector with
High
Purity
Hydro-Formed
Vacuum Coated Inner Surface
CSA WATTAGE OPTIONS
CSA: 400W
IP RATING
IP65: Suitable for Wet Location
NOTE:
Consult with your sales representative for lead time.
Application option is only available for the Circular 70W, 80W, and 100W
1
2
250W - 400W
TUBULAR INDUCTION
MOUNTING
HEIGHT
120W
- 250W
15'
to 40'
MOUNTING HEIGHT
ACCESSORIES
12' to 40'
ORDERING OPTIONS
DESCRIPTION
WATTAGE
PART NUMBERS
STEP DOWN
TRANSFORMER
35W-100W
120W-200W
250W-400W
HH-ILS-SD1-125VA
HH-ILS-SD2-245VA
HH-ILS-SD3-460VA
STEP DOWN
TRANSFORMER
HOUSING KIT
DISC
GENERATOR
HHILPQ32840
WIRE GUARD
200W
250W
300W
400W
ILASGCW
HIGHBAY
PERFORMANCE
REFLECTOR
150W
200W
250W
HHILPF00020
SERIES
LAMP
T=TUBULAR
LAMP
WATTAGE
LENS
ORDERING OPTIONS
120=120W
WATTAGE
150=150W
200=200W
HB = HIGHBAY
02 = 02 SERIES
C = CIRCULAR
250=250W
250 = 250W
300 = 300W
400 = 400W
OPTIONS
P=POLYCARBONATE
BLANK=500K
LENS
SIZE OF REFRACTOR
27=2700K
30=3000K
BLANK = NO LENS
A = ACRYLIC
40=4000K
30"
60=6000K
65=6500K
COLOR TEMP
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
Actual performance
may differ
a result
end-user
environment
and application.
Specifications
subject subject
to change
without without
notice. notice.
Actual performance
mayasdiffer
as aofresult
of end-user
environment
and application.
Specifications
to change
18
18
BASIC
BASIC COLLECTION
COLLECTION -- HIGHBAY
INDUCTION
SERIES
CANOPY SERIES
HB03
CN01
CONSTRUCTION
CONSTRUCTION
Aluminum
Corrosion Housing,
ResistantVacuum
Die CastCoated
Aluminum
Inner
Surface
Housing
Disc
Externally Mounted (IP43),
Low Generator
Profile Design
Powder
Powder Coated
Coated White
Finish:(Standard)
Dark Bronze
Aluminum
Finish
Heat and UV
Resistant Prismatic
Pendant
MountLens
or Hook
Polycarbonate
Standard Mounting Option: Surface Mounted
LAMP TYPE/WATTAGES
Circular Induction Lamps Available:
120W,150W, 200W, 250W
CIRCULAR
INDUCTION
DISC
INDUCTION
GENERATOR
40W - 100W
CIRCULAR
INDUCTION
BULB INDUCTION
120W
85W1 - 250W
MOUNTING
MOUNTINGHEIGHT
HEIGHT
10'
to 15
40'
8 to
NOTE:
Consult with your sales representative for lead time.
2
1
Application
option
only
available
for the Circular
70W, 80W, and 100W
NOTE:
Consult
with is
your
sales
representative
for availability.
1
ACCESSORIES
ACCESSORIES
DESCRIPTION
DESCRIPTION
PART NUMBERS
WATTAGE
PART NUMBERS
STEP DOWN
STEP
DOWN
TRANSFORMER
TRANSFORMER
HH-ILS-SD1-125VA
35W-100W
35W-100W
120W-200W
HH-ILS-SD2-245VA
250W-400W
HH-ILS-SD3-460VA
WIRE GUARD
LED CLUSTER
HIGHBAY
PERFORMANCE
BATTERY OPTIONS
REFLECTOR
DISC
GENERATOR
ORDERING
OPTIONS
ORDERING
OPTIONS
TYPE
SERIES
TYPE
CN=CANOPY
LAMP
SERIES
01=01 SERIES
HHILPQ32840
HB = HIGHBAY
03 = 03 SERIES
150W
200W
ILASGBL
FHS1-AR-6W-CL
250W
FHSBATT3-C3
150W
200W
FHSBATT3-D4HHILPF00020
250W
FHSBATT3-F7
WATTAGE
LAMP
C-CIRCULAR
WATTAGE
040=40W
B=BULB
FHS1-UNV-3.6L
CN02
HB04
LENS
LENS
P=POLYCARBONATE
070=70W
120 = 120W
080=80W
150 = 150W
C = CIRCULAR 100=100W
200 = 200W
250 = 250W
085=85W
BLANK = NO LENS
P = POLYCARBONATE
E=PENDANT
22"
MOUNTED
OPTIONS
COLOR TEMP
BLANK=500K
27=2700K
BLANK = 5000K
27 = 2700K
30=3000K
30 = 3000K
40 = 4000K
40=4000K
60 = 6000K
65 = 6500K
60=6000K
Z = CE1
65=6500K
Example:
Polycarbonate
Surface
Mounted, 5000K)
Example: CN-01-C040-P
HB-03-C120-22(Canopy,
(Highbay,0103Series,
Series,Circular,
Circular,40W,
120W,
No Lens, 22"Lens,
Refractor,
5000K)
HB-03-C250-P-22-60 (Highbay,
03 Series, Bulb,
Circular,
250W,
Polycarbonate
22" Refractor,
Example: CN-01-B085-P-E-60K
(Canopy, 01
85W,
Polycarbonate
Lens,Lens,
Pendant
Mounted, 6000K)
OPTICS
Separate
Generator
and Lamp
Compartment
High
Reflectivity
Aluminum
Housing
is Engineered for
Reliability
andWithout
Easy
Polycarbonate
Lens
(Available
Maintenance
Lens Upon Request)
Universal
Mounting Knockouts Allow for
Type
V Distribution
Quick and Straightforward Installation
IP RATING
IP20: For use in Dry Locations only
IP RATING
CE
WATTAGE
OPTIONS
IP43:
Suitable
for Damp Location
CE: 70W, 80W, 100W
OPTICS
Specular Reflector: Highly Polished Surface, Formed to Precision for a Total Reflectivity of 87%
Glare Reduction Lens
Polycarbonate Lens
DISC
INDUCTION
GENERATOR
CIRCULAR
INDUCTION
40W - 100W
CIRCULAR INDUCTION
BULB INDUCTION
70W1- 100W
85W
MOUNTING HEIGHT
MOUNTING HEIGHT
8' to 14'
8 to 15
NOTE:
Consult with your sales representative for lead time.
2
1
Application
option
onlysales
available
for the Circular
70W, 80W, and 100W
NOTE:
Consult
withisyour
representative
for availability.
1
ACCESSORIES
ACCESSORIES
DESCRIPTION
DESCRIPTION
PART NUMBERS
WATTAGE
PART NUMBERS
STEPDOWN
DOWN
STEP
TRANSFORMER
TRANSFORMER
HH-ILS-SD1-125VA
35W-100W
35W-100WHH-ILS-SD2-245VA
120W-200W
250W-400W
HH-ILS-SD3-460VA
DISC
GENERATOR
MOUNTING OPTIONS
SIZE OF REFRACTOR
BLANK=SURFACE
MOUNTED
CONSTRUCTION
CONSTRUCTION
Corrosion
Cast Coated
Aluminum Housing
AluminumResistant
Housing, Die
Vacuum
Low
Design
InnerProfile
Surface
Powder
Coated Finish:
Dark Bronze
Disc Generator
Externally
Mounted (IP43),
Standard
Mounting
Option:
Surface Mounted
Powder Coated
White
(Standard)
Heat
and UV
Resistant Prismatic
Aluminum
Finish
Polycarbonate
Pendant MountLens
or Hook
Universal Mounting Knockouts Allow for Quick
and
Straightforward
Installation
LAMP
TYPE/WATTAGES
LAMP
TYPE/WATTAGES
Circular
Induction Lamps Available:
Circular
Induction
70W, 80W,
100W Lamp Available:
40W, 70W, 80W, 100W
Bulb Induction Lamp Available: 85W1
FIREHORSE
STEP
DOWN
HOTSPOT2
TRANSFORMER
HOUSING KIT
DRIVER
CEIPWATTAGE
RATING OPTIONS
CE:
120W,
150W,
IP43:
Suitable
for200W,
Damp250W
Location
OPTICS
Specular Reflector: Highly Polished Surface, Formed to Precision for a Total Reflectivity of 87%
Glare Reduction Lens
Polycarbonate Lens
FIREHORSE
STEP
DOWN 2
HOTSPOT
TRANSFORMER
HOUSING KIT
DRIVER
OPTICS
High
Reflectance
Aluminum
Housing
Separate
Generator
and Lamp
Compartment
Polycarbonate
is EngineeredLens
for Reliability and Easy
(Available
Without Lens Upon Request)
Maintenance
Type
V Distribution
Universal
Mounting Knockouts Allow for
Quick and Straightforward Installation
IP RATING
IP20: For use in Dry Locations Only
HHILPQ32840
FHS1-UNV-3.6L
LED CLUSTER
FHS1-AR-6W-CL
BATTERY OPTIONS
FHSBATT3-C3
FHSBATT3-D4
FHSBATT3-F7
ORDERINGOPTIONS
OPTIONS
ORDERING
TYPE
TYPE
CN=CANOPY
SERIES
SERIES
01=01 SERIES
HB = HIGHBAY
LAMP
LAMP
WATTAGE
WATTAGE
C-CIRCULAR
040=40W
B=BULB
070=70W
04 = 04 SERIES
C = CIRCULAR
070 = 70W
080=80W
080 = 80W
100=100W
100 = 100W
085=85W
LENS
LENS
P=POLYCARBONATE
OPTIONS
SIZEMOUNTING
OF REFRACTOR
BLANK=SURFACE
MOUNTED
BLANK = NO LENS
P = POLYCARBONATE
E=PENDANT
16"
16"
MOUNTED
16"
OPTIONS
COLOR TEMP
BLANK=500K
BLANK =27=2700K
5000K
27 = 2700K
30=3000K
30 = 3000K
40 = 4000K
40=4000K
60 = 6000K
65 =60=6000K
6500K
Z = CE1
65=6500K
Example:CN-01-C040-P
HB-04-C040-10
(Highbay,
Series,
Circular,
40W,
No Lens, 10"Lens,
Refractor,
5000K)
Example:
(Canopy,
01 04
Series,
Circular,
40W,
Polycarbonate
Surface
Mounted, 5000K)
Example:CN-01-B085-P-E-60K
HB-04-C100-P-16-60(Canopy,
(Highbay,01
04Series,
Series,Bulb,
Circular,
Polycarbonate
16" Mounted,
Refractor,6000K)
6000K)
Example:
85W,100W,
Polycarbonate
Lens,Lens,
Pendant
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
323 599
5000
(323)
599-5000
19
HB05
CONSTRUCTION
Aluminum Housing, Vacuum Coated
Inner Surface
Disc Generator Externally Mounted (IP43),
Powder Coated White (Standard)
Aluminum Finish
Pendant Mount or Hook
OPTICS
High Reflectance Aluminum Housing
Acrylic Lens (Available Without Lens
Upon Request)
Type V Distribution
IP RATING
IP20: For use in Dry Locations only
LAMP TYPE/WATTAGES
Circular Induction Lamps Available:
70W1, 80W1, 100W1, 120W1, 150W, 200W
ACCESSORIES
ORDERING OPTIONS
DESCRIPTION
WATTAGE
PART NUMBERS
STEP DOWN
TRANSFORMER
35W-100W
120W-200W
250W-400W
HH-ILS-SD1-125VA
HH-ILS-SD2-245VA
HH-ILS-SD3-460VA
STEP DOWN
TRANSFORMER
HOUSING KIT
DISC
GENERATOR
HHILPQ32840
HIGHBAY
PERFORMANCE
REFLECTOR
150W
200W
TYPE
HB = HIGHBAY
SERIES
05 = 05 SERIES
LAMP
C = CIRCULAR
HHILPF00020
WATTAGE
LENS
SIZE OF REFRACTOR
COLOR TEMP
070 = 70W1
080 = 80W1
100 = 100W1
BLANK = NO LENS
A = ACRYLIC
19"
19"
19"
120 = 120W1
150 = 150W
200 = 200W
BLANK = NO LENS
A = ACRYLIC
22"
22"
22"
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
Z = CE1
Example: HB-05-C070-19 (Highbay, 05 Series, Circular, 70W, No Lens, 19" Refractor, 5000K)
Example: HB-05-C200-A-22-60 (Highbay, 05 Series, Circular, 200W, Acrylic Lens, 22" Refractor, 6000K)
HB06
CONSTRUCTION
Aluminum Housing, Vacuum Coated
Inner Surface
Disc Generator Externally Mounted (IP43),
Powder Coated White (Standard)
Aluminum Finish
Pendant Mount or Hook
OPTICS
High Reflectivity Aluminum Housing
Polycarbonate Lens (Available Without
Lens Upon Request)
Type V Distribution
IP RATING
IP20: For use in Dry Locations only
LAMP TYPE/WATTAGES
Circular Induction Lamps Available:
70W1, 80W1, 100W1, 120W1, 150W, 200W
ACCESSORIES
ORDERING OPTIONS
DESCRIPTION
WATTAGE
PART NUMBERS
STEP DOWN
TRANSFORMER
35W-100W
120W-200W
250W-400W
HH-ILS-SD1-125VA
HH-ILS-SD2-245VA
HH-ILS-SD3-460VA
STEP DOWN
TRANSFORMER
HOUSING KIT
DISC
GENERATOR
HHILPQ32840
WIRE GUARD
150W
200W
ILASGBL
HIGHBAY
PERFORMANCE
REFLECTOR
150W
200W
HHILPF00020
TYPE
HB = HIGHBAY
SERIES
06 = 06 SERIES
LAMP
C = CIRCULAR
WATTAGE
LENS
SIZE OF REFRACTOR
COLOR TEMP
070 = 070W1
080 = 080W1
100 = 100W1
BLANK = NO LENS
P = POLYCARBONATE
19"
19"
19"
120 = 120W1
150 = 150W
200 = 200W
BLANK = NO LENS
P = POLYCARBONATE
22"
22"
22"
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
Z = CE1
Example: HB-06-C070-19 (Highbay, 06 Series, Circular, 70W, No Lens, 19" Refractor, 5000K)
Example: HB-06-C200-P-22-60 (Highbay, 06 Series, Circular, 200W, Polycarbonate Lens, 22" Refractor, 6000K)
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
20
fulham.com
www.fulham.com
HB07
CONSTRUCTION
Aluminum Housing, Vacuum Coated
Inner Surface
Disc Generator Externally Mounted (IP43),
Powder Coated White (Standard)
Aluminum Finish
Pendant Mount or Hook
OPTICS
High Reflectance Aluminum Housing
Polycarbonate Lens
Type V Distribution
LAMP TYPE/WATTAGES
Circular Induction Lamps Available:
150W, 200W, 250W
CE WATTAGE OPTIONS
CE: 200W, 250W
IP RATING
IP20: For use in Dry Locations only
ACCESSORIES
ORDERING OPTIONS
DESCRIPTION
WATTAGE
PART NUMBERS
STEP DOWN
TRANSFORMER
120W-200W
250W-400W
HH-ILS-SD2-245VA
HH-ILS-SD3-460VA
STEP DOWN
TRANSFORMER
HOUSING KIT
DISC
GENERATOR
HHILPQ32840
TYPE
HB = HIGHBAY
SERIES
07 = 07 SERIES
LAMP
C = CIRCULAR
WATTAGE
150 = 150W
200 = 200W
250 = 250W
LENS
P = POLYCARBONATE
SIZE OF REFRACTOR
COLOR TEMP
24"
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
Z = CE1
Example: HB-07-C150-P-24 (Highbay, 07 Series, Circular, 150W, Polycarbonate Lens, 24" Refractor, 5000K)
Example: HB-07-C250-P-24-60 (Highbay, 07 Series, Circular, 250W, Polycarbonate Lens, 24" Refractor, 6000K)
HB10
CONSTRUCTION
Strong Die-cast Aluminum Housing
with Powder Coating
Disc Generator Externally Mounted,
Powder Coated White (Standard)
Corrosion Resistant, Vandal Proof, and Durable
Heat Resistant Seal Ring
Aluminum Finish
Pendant Mount or Hook
Pure Anodized Aluminum Reflector
OPTICS
High Reflectance Anodized Aluminum Housing
Flat Glass Lens
Type V Distribution
IP RATING
IP65: Suitable for Wet Location
CE/CSA WATTAGE OPTIONS
CE: 120W, 150W, 200W
CSA: 100W, 120W, 150W, 200W
LAMP TYPE/WATTAGES
Circular Induction Lamps Available:
100W, 120W, 150W, 200W
DISC INDUCTION GENERATOR
CIRCULAR INDUCTION
100W - 200W
MOUNTING HEIGHT
10' to 30'
ACCESSORIES
ORDERING OPTIONS
DESCRIPTION
WATTAGE
PART NUMBERS
HIGHBAY
PERFORMANCE
REFLECTOR
150W
200W
HHILPF00020
TYPE
HB = HIGHBAY
SERIES
10 = 10 SERIES
LAMP
C = CIRCULAR
WATTAGE
100 = 100W
120 = 120W
150 = 150W
200 = 200W
LENS
BLANK = NO LENS
G = GLASS
SIZE OF REFRACTOR
24"
COLOR TEMP
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
Z = CE1
Example: HB-10-C100-24 (Highbay, 10 Series, Circular, 100W, No Lens, 24" Refractor, 5000K)
Example: HB-10-C200-G-24-60 (Highbay, 10 Series, Circular, 200W, Glass Lens, 24" Refractor, 6000K)
Checksubject
with sales
representative
for availability.
Actual performance may differ as a result of end-user environment and application. Specifications
to change
without notice.
21
fulham.com
(323)
599-5000
21
LINEAR HIGHBAY
The Induction Linear Highbay Series can be used in a variety of ceiling or wall mount
applications including warehouse facilities, factories, stadiums, highbay/lowbay applications, and
exhibition halls. It provides optimal light distribution with an anodized aluminum reflector and open
lamp compartment. The LH01 induction system operates well in cold temperatures and reduces
on-site glare compared to HID while outputting effective security light levels. The long life and
superior lumen maintenance of induction significantly reduce maintenance costs and provide a
considerable reduction in the total cost of ownership.
APPLICATIONS
Stadiums
Factories
Warehouse Facilities
Exhibition Halls
Airports
Supermarkets
Highbay/Lowbay Applications
Intended to Replace HID
ELECTRICAL
Universal Voltage (120V 277V)
High Power Factor (>.95)
Ambient Temperature Rating: -4F to 104F
-20C to 40C
Input Frequency: 50/60 Hz
Constant Wattage Output With Less Than 3% Variance
Operating Frequency: 250 kHz
Generator Type: Class P Type 1 Outdoor
THD %: <10%
Pre-Wired Output Connector (Plug and Play)
CSA: 208V-347V
CE: 208V-240V
CHARACTERISTICS
Low Lumen Depreciation: >70% Lumen Maintenance at 60,000 Hours
Standard Kevin Temperature is 5000K: Provides a Cooler Color Temperature
Wide Range of Color Temperature Options Available: 2700K 6500K1
Pre-Wired Input Connector
CRI > 80
Vibration and Shock Resistant: No Filament
COMPLIANCE
UL listed UL 1598 (E363375)
cUL listed UL 1598 (E363375)
FCC Part 18-A
Surge Immunity IEC 61000-4-5: Class 4
CSA/CE: Refer to Product's CSA/CE Wattage Options
CONTACT FULHAM CLIENT SERVICES FOR
Luminaires with a full range of lamp color temperatures between 2700K 6500K
Lamps specifically designed for use in extreme cold applications or environments
Dimming options
Replacement components (generators & lamps) also sold separately
Color options for finish: Gray, Black, White, Dark Bronze, Green
WARRANTY
Five-year limited warranty available for Induction Lighting System. See page 43.
1
22
www.fulham.com
LH01
CONSTRUCTION
Square Profile Aluminum Housing
Standard Powder Coated Finish: White
Open Lamp Compartment
Die Cast Generator, Externally Mounted
for Thermal Management
Lamp and Generator are Easily Accessible
Horizontal Mount with Pendant Mount
Optional: L Bracket for Ceiling Mount
LAMP TYPE/WATTAGES
Tubular Induction Lamp Available:
400W
OPTICS
Specular Polished Surface Reflector Finish
Precision Formed Anodized Reflector
Type II Distribution
IP RATING
IP20. For use in Dry Locations only
CE WATTAGE OPTIONS
CE: 400W
CSA: 400W
LH = LINEAR
HIGHBAY
SERIES
01 = 01 SERIES
LAMP
T = TUBULAR
WATTAGE
400 = 400W
LENS
BLANK = NO LENS
MOUNTING
E = PENDANT
MOUNTED
Q = "L" BRACKET
COLOR TEMP
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
Z = CE1
Example: LH-01-T400-E (Linear Highbay, 01 Series, Tubular, 400W, No Lens, Pendant Mounted, 5000K)
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
323 599
5000
(323)
599-5000
23
POST TOP
The Induction Post Top Series can be used in a variety of applications. It features an
exclusive alloy housing with powder coated finish for corrosion resistance. The Induction Post
Top Series operates well in cold temperatures with an Instant On/re-strike capability. The long
life and superior lumen maintenance of induction significantly reduce maintenance costs and
provide a considerable reduction in the total cost of ownership.
APPLICATIONS
Plazas
Sidewalks
Walkways
Parks
Historical Areas
City Halls
Gardens
Retail Outlets
Intended to Replace HID
ELECTRICAL
Universal Voltage (120V 277V)
High Power Factor (>.95)
Ambient Temperature Rating: -4F to 104F
-20C to 40C
Input Frequency: 50/60 Hz
Constant Wattage Output With Less Than 3% Variance
Operating Frequency: 250 kHz
Generator Type: Class P Type 1 Outdoor
THD %: <10%
Instant On
No Noise Compared to HID Systems
No Lumen Output Variation Over a Wide Range of
Temperatures and Through Voltage Fluctuations
Pre-Wired Output Connector (Plug and Play)
CHARACTERISTICS
Low Lumen Depreciation: >70% Lumen Maintenance at 60,000 Hours
Standard Kevin Temperature is 5000K: Provides a Cooler Color Temperature
Wide Range of Color Temperature Options Available: 2700K 6500K1
Pre-Wired Input Connector
CRI > 80
Vibration and Shock Resistant: No Filament
COMPLIANCE
UL listed UL 1598 (E363375)
cUL listed UL 1598 (E363375)
FCC Part 18-A
Surge Immunity IEC 61000-4-5: Class 4
CONTACT FULHAM CLIENT SERVICES FOR:
Luminaires with a full range of lamp color temperatures between 2700K 6500K
Lamps specifically designed for use in extreme cold applications or environments
Dimming options
Replacement components (generators & lamps) also sold separately
Color options for finish: Gray, Black, White, Dark Bronze, Green
WARRANTY
Five-year limited warranty available for Induction Lighting System. See page 43.
24
fulham.com
www.fulham.com
BASIC
SERIES
BASIC
BASICCOLLECTION
COLLECTION
COLLECTION---COBRAHEAD
COBRAHEAD
POST TOP SERIES
SERIES
PT04
CH05
OPTICS
LAMP
TYPE/WATTAGES Frosted
Glass Lens
Circular
Induction
Lamp Available: 40W, 70W, 80W
Type
V Distribution
Bulb
Induction
Lamp Available: 55W
CONSTRUCTIONCONSTRUCTION
StandardStructure,
Powder Coated
Finish:
Black
Compact
Corrosion
Resistant
Corrosion
Resistant
Die
Cast Aluminum
Alloy Housing
Aluminum
Alloy Housing
Profile
Generator
Linear
Profile
GeneratorReflector
Hydro-Formed Aluminum
Frosted Glass
Lens
Photocell
is Optional
Gas-tight Silicon Rubber Seal
Pole Mounted:
Outer
Diameter
Curved
Tempered
Glass
Lens 2.99"
- Inner Diameter
2.76" Seal
Gas-tight
Silicon Rubber
IP RATING
OPTICS
IP65:
Suitable
for Wet Glass
Location
Clear
Curved
Tempered
Lens
High Purity Hydro-Formed Aluminum Reflector
IP RATING IP65: Suitable for Wet Location
NOTE:
Consult with your sales representative for lead time.
2
Application option is only available for the Circular 70W, 80W, and 100W
1
ORDERING OPTIONS
CIRCULAR INDUCTION
40W - 80W
BULB INDUCTION
55W
MOUNTING HEIGHT
10' to 18'
TYPE
SERIES
WATTAGE
LENS
OPTIONS
C-CIRCULAR
040=40W
G=GLASS
BLANK=500K
055=55W
27=2700K
070=70W
30=3000K
ORDERING OPTIONS
ACCESSORIES
BULB
INDUCTION
DESCRIPTION
35W - 85W
PHOTOCELL_BLUE
MOUNTING
HEIGHT
8' to 15'
LAMP
TYPE
PART NUMBERS
SERIES
080=80W
WATTAGE
LAMP
40=4000K
COLOR TEMP
60=6000K
LENS
ILAPHCU
65=6500K
BLANK = 5000K
27 = 2700K
Example: CH-05-C040-G (Cobrahead, 05 035
Series,
= 35W Circular, 40W, Glass Lens, 5000K)
30 = 3000K
PT = POST TOP
04 = 04 SERIES
B = BULB
055
55W
= GLASS
Example:
CH-05-B055-G-60
(Cobrahead,
05 =Series,
Bulb, G55W,
Glass Lens, 6000K)
40 = 4000K
085 = 85W
60 = 6000K
65 = 6500K
Example: PT-04-B035-G (Post Top, 04 Series, Bulb, 35W, Glass Lens, 5000K)
Example: PT-04-B085-G-60 (Post Top, 04 Series, Bulb, 85W, Glass Lens, 6000K)
CH06
PT05
CONSTRUCTION CONSTRUCTION
Powder Coated Finish, Corrosion Resistant
Standard
Powder Coated
Finish: Gray
Die Cast Aluminum
Alloy Housing
Compact
Structure
Profile Generator
Corrosion
Resistant
Hydro-Formed
Aluminum Reflector
Die
Cast Aluminum
Alloy Housing
Tempered
Glass Lens
Profile
Generator
Gas-tight
Silicon Rubber Seal
Gas-tight
Silicon
Rubber 2.63
Seal
Pole Mounted:
Diameter
Pole Mounted: Diameter 3.03"
LAMP TYPE/WATTAGES
Circular Induction Lamps Available:
40W, 70W, 80W
PART NUMBERS
PHOTOCELL_BLUE
ILAPHCU
NOTE:
Consult with your sales representative for lead time.
Application option is only available for the Circular 70W, 80W, and 100W
1
2
ORDERING OPTIONS
TYPE
SERIES
LAMP
WATTAGE
ORDERING OPTIONS
T-TUBULAR
LAMP
070=70W
WATTAGE
080=80W
LENS
G=GLASS
LENS
100=100W
PT = POST TOP
05 = 05 SERIES
C = CIRCULAR
120=120W
040 = 40W
070 150=150W
= 70W
P = POLYCARBONATE
080 = 80W
OPTIONS
BLANK=500K
COLOR TEMP
27=2700K
30=3000K
BLANK = 5000K
40=4000K
27 = 2700K
30 = 3000K
60=6000K
40 = 4000K
0 = 6000K
65=6500K
65 = 6500K
Actual performance
may
as aofresult
of end-user
environment
and application.
Specifications
to change
Actual performance
may differ
asdiffer
a result
end-user
environment
and application.
Specifications
subject subject
to change
without without
notice. notice.
323 599
5000
(323)
599-5000
25
SECURITY LIGHTERS
The Induction Security Lighter Series can be used in a variety of applications including parking
lots, parks, area lighting, gardens, and security areas. It is ideal for areas of high security and
safety, producing a high S/P ratio that increases visibility levels. Its cast aluminum housing
provides superior corrosion resistance. These systems operate well in cold temperatures with an
Instant On/re-strike capability and are suitable for use in wet locations (IP55). The long life and
superior lumen maintenance of induction significantly reduce maintenance costs and provide a
considerable reduction in the total cost of ownership.
APPLICATIONS
Parking Lots
Buildings
Area Lighting
Parks
Gardens
Security Areas
Intended to Replace HID
ELECTRICAL
Universal Voltage (120V 277V)
High Power Factor (>.95)
Ambient Temperature Rating: -4F to 104F
-20C to 40C
Input Frequency: 50/60 Hz
Constant Wattage Output With Less Than 3% Variance
Operating Frequency: 250 kHz
Generator Type: Class P Type 1 Outdoor
THD %: <10%
Instant On
No Noise Compared to HID Systems
No Lumen Output Variation Over a Wide Range of
Temperatures and Through Voltage Fluctuations
Pre-Wired Output Connector (Plug and Play)
26
CHARACTERISTICS
Low Lumen Depreciation: >70% Lumen Maintenance at 60,000 Hours
Standard Kevin Temperature is 5000K: Provides a Cooler Color Temperature
Wide Range of Color Temperature Options Available: 2700K 6500K1
Pre-Wired Input Connector
CRI > 80
Vibration and Shock Resistant: No Filament
COMPLIANCE
UL listed UL 1598 (E363375)
cUL listed UL 1598 (E363375)
FCC Part 18-A
Surge Immunity IEC 61000-4-5: Class 4
CONTACT FULHAM CLIENT SERVICES FOR:
Luminaires with a full range of lamp color temperatures between 2700K 6500K
Lamps specifically designed for use in extreme cold applications or environments
Dimming options
Replacement components (generators & lamps) also sold separately
Color options for finish: Gray, Black, White, Dark Bronze, Green
WARRANTY
Five-year limited warranty available for Induction Lighting System. See page 43.
1
www.fulham.com
fulham.com
SL01
OPTICS
Die Cast Aluminum Reflector Hood
Acrylic Hood, High Heat Resistance
Type V Distribution
CONSTRUCTION
Die Cast Aluminum Housing
Corrosion Resistant
Low Profile Design
Aluminum Finish Housing
Generator IP55 Rated
Powder Coated White
Generator (Standard)
Pole Mounted (Diameter 1.57")
Preinstalled Photocell Receptacle
(Photocell NOT included)
IP RATING
Generator IP55: Suitable for Wet Location
LAMP TYPE/WATTAGES
Circular Induction Lamp Available:
40W1, 70W1, 80W, 100W
Bulb Induction Lamps Available:
35W1, 55W1, 85W
SECURITY DISC INDUCTION GENERATOR
NOTE: 1Consult with your sales representative for availability.
CIRCULAR INDUCTION
40W - 100W
BULB INDUCTION
35W - 85W
MOUNTING HEIGHT
8' to 20'
ORDERING OPTIONS
TYPE
SERIES
DESCRIPTION
PART NUMBERS
PHOTOCELL (BLUE)
ILAPHCU
PHOTOCELL - 10
ILAPHCU10
WATTAGE
C = CIRCULAR
040 = 40W
070 = 70W1
080 = 80W
100 = 100W
LENS
COLOR TEMP
A = ACRYLIC
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
ACCESSORIES
ACCESSORIES
LAMP
SL = SECURITY
LIGHTER
01 = 01 SERIES
B = BULB
035 = 35W1
055 = 55W1
085 = 85W
Example: SL-01-C040-A (Security Lighter, 01 Series, Circular, 40W, Acrylic Lens, 5000K)
Example: SL-01-B085-A-60 (Security Lighter, 01 Series, Bulb, 85W, Acrylic Lens, 6000K)
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
323
599
5000
fulham.com
(323)
599-5000
27
SHOEBOX
The Induction Shoebox Series can be used in a variety of applications including parking lots,
tennis courts, public areas, and car dealerships. It features a squared welded aluminum housing
with superior corrosion resistance. All luminaires in the Induction Shoebox Series operate well in
cold temperatures with an Instant On/re-strike capability and are suitable for use in wet locations
(IP54). The long life and superior lumen maintenance of induction significantly reduce maintenance
costs and provide a considerable reduction in the total cost of ownership.
APPLICATIONS
Parking Lots
Tennis Courts
Car Dealerships
Public Areas
Intended to Replace HID
ELECTRICAL
Universal Voltage (120V 277V)
High Power Factor (>.95)
Ambient Temperature Rating: -4F to 104F
-20C to 40C
Input Frequency: 50/60 Hz
Constant Wattage Output With Less Than 3% Variance
Operating Frequency: 250 kHz
Generator Type: Class P Type 1 Outdoor
THD %: <10%
Instant On
No Noise Compared to HID Systems
No Lumen Output Variation Over a Wide Range of
Temperatures and Through Voltage Fluctuations
Pre-Wired Output Connector (Plug and Play)
Step Down Transformer Voltage: 347V/480V to 277V
CSA: 208V-347V, CE: 208V-240V
28
CHARACTERISTICS
Low Lumen Depreciation: >70% Lumen Maintenance at 60,000 Hours
Standard Kevin Temperature is 5000K: Provides a Cooler Color Temperature
Wide Range of Color Temperature Options Available: 2700K 6500K1
Pre-Wired Input Connector
CRI > 80
Vibration and Shock Resistant: No Filament
COMPLIANCE
UL listed UL 1598 (E363375)
cUL listed UL 1598 (E363375)
FCC Part 18-A
Surge Immunity IEC 61000-4-5: Class 4
CSA/CE: Refer to Product's CSA/CE Wattage Options
CONTACT FULHAM CLIENT SERVICES FOR:
Luminaires with a full range of lamp color temperatures between 2700K 6500K
Lamps specifically designed for use in extreme cold applications or environments
Dimming options
Replacement components (generators & lamps) also sold separately
Color options for finish: Gray, Black, White, Dark Bronze, Green
WARRANTY
Five-year limited warranty available for Induction Lighting System. See page 43.
1
www.fulham.com
SB01
DARK
SKY
FRIENDLY
CONSTRUCTION
Squared Welded Aluminum Housing
Corrosion Resistant
Profile Generator
Standard Powder Coated Finish: Dark Bronze
Flat Clear Tempered Glass Lens
Integrated Structure for Lamp and Generator
4" Square Mounting Arm (Standard)
Optional: Slipfitter (Round Pole),
6" Square Arm and 8 Square Arm
OPTICS
Clear Glass Lens with High Light Penetration
High Reflectivity Vacuum Coated
Inner Surface Finish
Symmetric Hydroformed Aluminum Reflector
Type V Distribution
IP RATING
IP54: Suitable for Wet Location
LAMP TYPE/WATTAGES
Circular Induction Lamps Available:
40W1, 55W1, 70W1, 80W1, 100W
NOTE:
Consult with your sales representative for availability.
ORDERING OPTIONS
TYPE
CIRCULAR INDUCTION
40W - 100W
MOUNTING HEIGHT
8' to 15'
ACCESSORIES
DESCRIPTION
PART NUMBERS
SERIES
SB = SHOEBOX
01 = 01 SERIES
LAMP
C = CIRCULAR
WATTAGE
040 = 40W1
055 = 55W1
070 = 70W1
080 = 80W1
100 = 100W
LENS
MOUNTING
COLOR TEMP
G = GLASS
BLANK =
4" SQUARE ARM
6 = 6" SQUARE ARM1
8 = 8" SQUARE ARM1
I = SLIPFITTER
(ROUND POLE)1
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
HH-ILS-SD1-125VA
Example: SB-01-C040-G (Shoebox, 01 Series, Circular, 40W, Glass Lens, 4" Square Arm, 5000K)
Example: SB-01-C100-G-I-60 (Shoebox, 01 Series, Circular, 100W, Glass Lens, Slipfitter (Round Pole), 6000K)
SB02
DARK
SKY
FRIENDLY
CONSTRUCTION
Squared Welded Aluminum Housing
Corrosion Resistant
Profile Generator
Standard Powder Coated Finish: Dark Bronze
Separate Generator and Lamp Compartment
Engineered for Reliability and Easy
Maintenance
Flat Clear Tempered Glass Lens
4" Square Mounting Arm (Standard),
Optional: Slipfitter (Round Pole),
6" Square Arm and 8" Square Arm
OPTICS
Clear Glass Lens with High Light Penetration
High Reflectivity Vacuum Coated
Inner Surface Finish
Symmetric Hydroformed Aluminum Reflector
Type V Distribution
IP RATING
IP54: Suitable for Wet Location
CSA WATTAGE OPTIONS
CSA: 150W, 200W, 250W
LAMP TYPE/WATTAGES
Circular Induction Lamps Available:
150W, 200W, 250W
ORDERING OPTIONS
TYPE
ACCESSORIES
DESCRIPTION
NOTE:
1
Consult with your sales representative for availability.
PART NUMBERS
SERIES
SB = SHOEBOX
02 = 02 SERIES
LAMP
C = CIRCULAR
WATTAGE
150 =150W
200 = 200W
250 = 250W
LENS
MOUNTING
COLOR TEMP
G = GLASS
BLANK =
4" SQUARE ARM
6 = 6" SQUARE ARM1
8 = 8" SQUARE ARM1
I = SLIPFITTER
(ROUND POLE)1
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
HH-ILS-SD3-460VA
Example: SB-02-C150-G (Shoebox, 02 Series, Circular, 150W, Glass Lens, 4" Square Arm, 5000K)
Example: SB-02-C250-G-I-60 (Shoebox, 02 Series, Circular, 250W, Glass Lens, Slipfitter (Round Pole), 6000K)
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
323 599
5000
(323)
599-5000
29
SB03
DARK
SKY
FRIENDLY
CONSTRUCTION
Squared Welded Aluminum Housing
Corrosion Resistant
Sealed Die Cast Generator
Standard Mounting (Luminaire mounts
directly without any of the mounting
options descibed below)
Standard Powder Coated Finish: Dark Bronze
Separate Generator and Lamp Compartment
Engineered for Reliability and Easy
Maintenance
Polycarbonate Lens
4" Square Mounting Arm (Standard)
Optional: Slipfitter (Round Pole),
6" Square Arm and 8" Square Arm
LAMP TYPE/WATTAGES
Circular Induction Lamps Available:
250W, 300W
OPTICS
Polycarbonate Lens
High Reflectivity Vacuum Coated
Inner Surface Finish
Symmetric Hydroformed Aluminum Reflector
Type V Distribution
IP RATING
IP54: Suitable for Wet Location
CIRCULAR INDUCTION
250W - 300W
MOUNTING HEIGHT
15' to 40'
ORDERING OPTIONS
TYPE
SERIES
LAMP
WATTAGE
LENS
MOUNTING
COLOR TEMP
P = POLYCARBONATE
X = STANDARD3
BLANK =
4" SQUARE ARM
6 = 6" SQUARE ARM1
8 = 8" SQUARE ARM1
I = SLIPFITTER
(ROUND POLE)1
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
ACCESSORIES
DESCRIPTION
PART NUMBERS
SB = SHOEBOX
03 = 03 SERIES
C = CIRCULAR
250 = 250W
300 = 300W
HH-ILS-SD3-460VA
Example: SB-03-C250-P (Shoebox, 03 Series, Circular, 250W, Polycarbonate Lens, 4" Square Arm, 5000K)
Example: SB-03-C300-P-I-60 (Shoebox, 03 Series, Circular, 300W, Polycarbonate Lens, Slipfitter (Round Pole),6000K)
SB04
DARK
SKY
FRIENDLY
CONSTRUCTION
Squared Welded Aluminum Housing
Corrosion Resistant
Profile Generator
Standard Powder Coated Finish: Dark Bronze
Flat Clear Tempered Glass Lens
Integrated Structure for Lamp and Generator
4" Square Mounting Arm (Standard)
Optional: Slipfitter (Round Pole),
6" Square Arm and 8" Square Arm
OPTICS
Glare Reduction Lens
Specular Polished Surface Reflector Finish
Precision Formed Anodized Reflector
Type V Distribution
IP RATING
IP54: Suitable for Wet Location
LAMP TYPE/WATTAGES
Tubular Induction Lamps Available:
300W, 400W
ACCESSORIES
DESCRIPTION
PART NUMBERS
ORDERING OPTIONS
TYPE
SERIES
LAMP
WATTAGE
LENS
MOUNTING
COLOR TEMP
G = GLASS
BLANK =
4" SQUARE ARM
6 = 6" SQUARE ARM1
8 = 8" SQUARE ARM1
I = SLIPFITTER
(ROUND POLE)1
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
HH-ILS-SD3-460VA
SB = SHOEBOX
04 = 04 SERIES
T = TUBULAR
300 = 300W
400 = 400W
Example: SB-04-T300-G (Shoebox, 04 Series, Tubular, 300W, Glass Lens, 4" Square Arm, 5000K)
Example: SB-04-T400-G-I-60 (Shoebox, 04 Series, Tubular, 400W, Glass Lens, Slipfitter (Round Pole), 6000K)
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
30
fulham.com
www.fulham.com
BASIC COLLECTION
COLLECTION -- SHOEBOX
INDUCTIONSERIES
CANOPY SERIES
BASIC
SB05
DARK
SKY
FRIENDLY
CONSTRUCTION
Die Cast Aluminum Housing
Corrosion Resistant
Low Profile Design
Standard Powder Coated Finish:
Dark Bronze
Gas-tight Silicon Rubber Seal
Slipfitter Round Pole (Standard)
Optional: Swivel Bracket
OPTICS
Flat Clear Tempered Glass Lens
Specular Polished Surface Reflector Finish
Precision Formed Anodized Reflector
Type V Distribution
IP RATING
IP54: Suitable for Wet Location
LAMP TYPE/WATTAGES
Tubular Induction Lamp Available:
300W (2 x 150W)
ACCESSORIES
DESCRIPTION
PART NUMBERS
TYPE
SERIES
LAMP
WATTAGE
LENS
HH-ILS-SD3-460VA
SB = SHOEBOX
05 = 05 SERIES
T = TUBULAR
300 = 300W
G = GLASS
MOUNTING
I = SLIPFITTER
(ROUND POLE)
V = SWIVEL
BRACKET1
COLOR TEMP
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
Example: SB-05-T300-G-I (Shoebox, 05 Series, Tubular, 300W, Glass Lens, Slipfitter (Round Pole), 5000K)
Example: SB-05-T300-G-V-60 (Shoebox, 05 Series, Tubular, 300W, Glass Lens, Swivel Bracket, 6000K)
Checksubject
with sales
representative
for availability.
Actual performance may differ as a result of end-user environment and application. Specifications
to change
without notice.
323 599
5000
(323)
599-5000
31
TUNNEL LIGHTER
The Induction Tunnel Lighter Series can be used in a variety of ceiling or wall mount applications
including tunnels, warehouse facilities, factories, stadiums, highbay/lowbay applications, and exhibition
halls. It provides optimal light distribution with its anodized aluminum reflector and clear tempered glass
lens. Its gas-tight silicon rubber seal makes it suitable for wet locations (IP65). These reliable induction
systems operate well in cold temperatures, output effective security light levels, and reduce on-site glare
compared to HID. The long life and superior lumen maintenance of induction significantly reduce maintenance costs and provide a considerable reduction in the total cost of ownership.
APPLICATIONS
Tunnels
Stadiums
Factories
Warehouse Facilities
Exhibition Halls
Airports
Supermarkets
Highbay/Lowbay Applications
Amusement Parks
Intended to Replace HID
ELECTRICAL
Universal Voltage (120V 277V)
High Power Factor (>.95)
Ambient Temperature Rating: -4F to 104F
-20C to 40C
Input Frequency: 50/60 Hz
Constant Wattage Output With Less Than 3% Variance
Operating Frequency: 250 kHz
Generator Type: Class P Type 1 Outdoor
THD %: <10%
Pre-Wired Output Connector (Plug and Play)
CSA: 208V-347V, CE: 208V-240V
32
CHARACTERISTICS
Low Lumen Depreciation: >70% Lumen Maintenance at 60,000 Hours
Standard Kevin Temperature is 5000K: Provides a Cooler Color Temperature
Wide Range of Color Temperature Options Available: 2700K 6500K1
Pre-Wired Input Connector
CRI > 80
Vibration and Shock Resistant: No Filament
COMPLIANCE
UL listed UL 1598 (E363375)
cUL listed UL 1598 (E363375)
FCC Part 18-A
CSA/CE: Refer to Product's CSA/CE Wattage Options
CONTACT FULHAM CLIENT SERVICES FOR:
Luminaires with a full range of lamp color temperatures between 2700K 6500K
Lamps specifically designed for use in extreme cold applications or environments
Dimming options
Replacement components (generators & lamps) also sold separately
Color options for finish: Gray, Black, White, Dark Bronze, Green
WARRANTY
Five-year limited warranty available for Induction Lighting System. See page 43.
1
fulham.com
www.fulham.com
TL01
CONSTRUCTION
Square Profile Aluminum Housing
Standard Powder Coated Finish: White
Die Cast Generator, Externally Mounted
for Thermal Management
Gas-tight Silicon Rubber Seal
Easy Maintenance with Front Glass Lens
Horizontal Mount with U Bracket
(Optional: L Bracket)
OPTICS
Specular Polished Surface Reflector Finish
Precision Formed Anodized Reflector
Clear Tempered Glass Lens
Type II Distribution
IP RATING
IP65: Suitable for Wet Location
CE/CSA WATTAGE OPTIONS
CE: 70W, 80W, 100W, 120W, 150W, 200W
CSA: 70W, 80W, 100W, 120W, 150W, 200W
LAMP TYPE/WATTAGES
Tubular Induction Lamps Available:
100W1, 120W, 150W, 200W
ORDERING OPTIONS
TYPE
SERIES
TL = TUNNEL
LIGHTER
01 = 01 SERIES
LAMP
WATTAGE
T = TUBULAR
100 = 100W1
120 = 120W
150 = 150W
200 = 200W
LENS
G = GLASS
MOUNTING
COLOR TEMP
BLANK = U BRACKET
Q = L BRACKET
BLANK = 5000K
27= 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
Z = CE1
Example: TL-01-T100-G (Tunnel Lighter, 01 Series, Tubular, 100W, Glass Lens, U Bracket, 5000K)
Example: TL-01-T200-G-Q-60 (Tunnel Lighter, 01 Series, Tubular, 200W, Glass Lens, L Bracket, 6000K)
TL02
CONSTRUCTION
Square Profile Aluminum Housing
Standard Powder Coated Finish: White
Die Cast Generator, Externally Mounted
for Thermal Management
Gas-tight Silicon Rubber Seal
Easy Maintenance with Front Glass Lens
Horizontal Mount with U Bracket
Optional: L Bracket)
LAMP TYPE/WATTAGES
Tubular Induction Lamps Available:
250W, 300W, 400W
OPTICS
Specular Polished Surface Reflector Finish
Precision Formed Anodized Reflector
Clear Tempered Glass Lens
Type II Distribution
IP RATING
IP65: Suitable for Wet Location
CE/CSA WATTAGE OPTIONS
CE: 250W, 300W, 400W
CSA: 250W, 300W, 400W
SERIES
TL = TUNNEL
LIGHTER
02 = 02 SERIES
LAMP
T = TUBULAR
WATTAGE
250 = 250W
300 = 300W
400 = 400W
LENS
G = GLASS
MOUNTING
COLOR TEMP
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
Z = CE1
Example: TL-02-T250-G (Tunnel Lighter, 02 Series, Tubular, 250W, Glass Lens, U Bracket, 5000K)
Example: TL-02-T400-G-Q-60 (Tunnel Lighter, 02 Series, Tubular, 400W, Glass Lens, L Bracket, 6000K)
323 599
5000
(323)
599-5000
33
WALL PACK
WALLPACK
The Induction Wall Pack Series can be used in a variety of wall mount applications including warehouse facilities, shipping and receiving areas, commercial buildings, area lighting, and city halls. These
reliable induction systems operate well in cold temperatures and are suitable for use in wet locations (IP54). The Induction Wall Pack Series provides uniformity, reduces on-site glare compared
to HID and outputs effective security light levels. The long life and superior lumen maintenance of induction
reduce maintenance costs and provide a considerable reduction in the total cost of ownership.
APPLICATIONS
Wall Mounted
Site Lighting
Area Lighting
Warehouse Facilities
Shipping & Receiving Areas
Industrial Plants
Commercial Buildings
Parks
Plazas
City Halls
Intended to Replace HID
ELECTRICAL
Universal Voltage (120V 277V)
High Power Factor (>.95)
Ambient Temperature Rating: -4F to 104F
-20C to 40C
Input Frequency: 50/60 Hz
Constant Wattage Output With Less Than 3% Variance
Operating Frequency: 250 kHz
Generator Type: Class P Type 1 Outdoor
THD %: <10%
Pre-Wired Output Connector (Plug and Play)
Step Down Transformer Voltage: 347V/480V to 277V
CSA: 208V-347V, CE: 208V-240V
CHARACTERISTICS
Low Lumen Depreciation: >70% Lumen Maintenance at 60,000 Hours
Standard Kevin Temperature is 5000K: Provides a Cooler Color Temperature
Wide Range of Color Temperature Options Available: 2700K 6500K1
Pre-Wired Input Connector
CRI > 80
Vibration and Shock Resistant: No Filament
COMPLIANCE
UL listed UL 1598 (E363375)
cUL listed UL 1598 (E363375)
FCC Part 18-A
Surge Immunity IEC 61000-4-5: Class 4
CSA/CE: Refer to Product's CSA/CE Wattage Options
CONTACT FULHAM CLIENT SERVICES FOR:
Luminaires with a full range of lamp color temperatures between 2700K 6500K
Lamps specifically designed for use in extreme cold applications or environments
Dimming options
Replacement components (generators & lamps) also sold separately
Color options for finish: Gray, Black, White, Dark Bronze, Green
WARRANTY
Five-year limited warranty available for Induction Lighting System. See page 43.
1
34
fulham.com
www.fulham.com
WP01
OPTICS
Specular Reflector: Uniformity
and Vertical Light Distribution
Glare Reduction Lens
Prismatic Glass Lens
Type IV Distribution
LAMP TYPE/WATTAGES
Tubular Induction Lamps Available:
40W, 55W, 70W, 80W, 100W
IP RATING
IP54: Suitable for Wet Location
ORDERING OPTIONS
TUBULAR INDUCTION
40W - 100W
MOUNTING HEIGHT
8' to 15'
TYPE
ACCESSORIES
PART NUMBERS
SERIES
WP = WALL PACK
01 = 01 SERIES
LAMP
WATTAGE
T = TUBULAR
040 = 40W
055 = 55W
070 = 70W
080 = 80W
100 = 100W
DESCRIPTION
CONSTRUCTION
Die Cast Aluminum Housing
Corrosion Resistant
Standard Powder Coated Finish: Dark Bronze
Gas-tight Silicon Rubber Seal
Vertical Wall Mount
LENS
COLOR TEMP
G = GLASS
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
HH-ILS-SD1-125VA
Example: WP-01-T040-G (Wall Pack, 01 Series, Tubular, 40W, Glass Lens, 5000K)
Example: WP-01-T100-G-60 (Wall Pack, 01 Series, Tubular, 100W, Glass Lens, 6000K)
WP02
DARK
SKY
FRIENDLY
CONSTRUCTION
Die Cast Aluminum Housing
Corrosion Resistant
Standard Powder Coated Finish: Dark Bronze
Gas-tight Silicon Rubber Seal
LAMP TYPE/WATTAGES
Tubular Induction Lamps Available:
IP RATING
CHARACTERISTICS 40W, 55W, 70W, 80W, 100W
IP54: Suitable for Wet Location
Low Lumen Depreciation, >70% at 60,000 Hours
Standard Kevin Temperature is 5000K: Provides a Cooler Temperature
Wide Range of Color Temperature Options Available: 2720K 6500K1
Pre-Wired Input Connector
DESCRIPTION
PART NUMBERS
WP = WALL PACK
02 = 02 SERIES
LAMP
WATTAGE
T = TUBULAR
040 = 40W
055 = 55W
070 = 70W
080 = 80W
100 =100W
OPTICS
Specular Reflector: Uniformity and
Vertical Light Distribution
Glare Reduction Lens
Prismatic Glass Lens
Type IV Distribution
LENS
G = GLASS
COLOR TEMP
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
HH-ILS-SD1-125VA
Example: WP-02-T040-G (Wall Pack, 02 Series, Tubular, 40W, Glass Lens, 5000K)
Example: WP-02-T100-G-60 (Wall Pack, 02 Series, Tubular, 100W, Glass Lens, 6000K)
Check
sales
representative
for availability.
performance
mayas
differ
as a of
result
of end-user
environment
and application.
Specifications
subject
to change
without
Actual Actual
performance
may differ
a result
end-user
environment
and application.
Specifications
subject
towith
change
without
notice.notice.
323 599
5000
(323)
599-5000
35
WP03
CONSTRUCTION
Die Cast Aluminum Housing
Corrosion Resistant
Standard Powder Coated Finish: Dark Bronze
Low Profile Design
Heat and UV Resistant Prismatic
Polycarbonate Lens
Gas-tight Silicon Rubber Seal
Vertical Wall Mount
OPTICS
Specular Reflector: Provides Uniformity
Polycarbonate Glare Reduction Lens
Type IV Distribution
IP RATING
IP54: Suitable for Wet Location
LAMP TYPE/WATTAGES
Tubular Induction Lamps Available:
40W, 55W
ORDERING OPTIONS
TYPE
PART NUMBERS
WP = WALL PACK
SERIES
03 = 03 SERIES
LAMP
WATTAGE
T = TUBULAR
040 = 40W
055 = 55W
LENS
COLOR TEMP
P = POLYCARBONATE
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
HH-ILS-SD1-125VA
Example: WP-03-T040-P (Wall Pack, 03 Series, Tubular, 40W, Polycarbonate Lens, 5000K)
Example: WP-03-T055-P-60 (Wall Pack, 03 Series, Tubular, 55W, Polycarbonate Lens, 6000K)
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
36
fulham.com
www.fulham.com
MOUNTING OPTIONS
PART
NUMBER
ILMSLTD
MATERIAL
RANGE OF
ANGLES
GRADE
TENSILE STRENGTH
OF METAL
CORROSION
RESISTANT
FINISH
ALUMINUM
60 MAX
ZI102
145MPA
YES
DARK BRONZE
ORDERING OPTIONS
COMPATIBLE SERIES:
TYPE
MOUNTING TYPE
COLOR
ILM = INDUCTION
LUMINAIRE MOUNTING
SLT = SLIPFITTER
D = DARK BRONZE
MATERIAL
GAUGE
(mm)
GRADE
TENSILE STRENGTH
OF METAL
CORROSION
RESISTANT
FINISH
ALUMINUM
2 mm
6063T5
160MPA
YES
DARK BRONZE
ORDERING OPTIONS
COMPATIBLE SERIES:
TYPE
MOUNTING TYPE
LENGTH
COLOR
A = ARM
04 = 4"
06 = 6"
08 = 8"
10 = 10"
D = DARK BRONZE
ILM = INDUCTION
LUMINAIRE MOUNTING
SWIVEL BRACKET
The Swivel Bracket is composed of high strength steel (SPHC) and
has an adjustable aiming over 180 degree arc. Assembly is suitable
for mounting to pole without requiring access to luminaire. Swivel
Bracket comes in an elegant Dark Bronze finish.
MOUNTING OPTIONS
PART
NUMBER
ILMSWBD
MATERIAL
GAUGE
(mm)
GRADE
TENSILE STRENGTH
OF METAL
CORROSION
RESISTANT
FINISH
STEEL
N/A
Q235
215MPA
YES
DARK BRONZE
ORDERING OPTIONS
COMPATIBLE SERIES:
TYPE
MOUNTING TYPE
COLOR
ILM = INDUCTION
LUMINAIRE MOUNTING
SWB = SWIVEL
D = DARK BRONZE
(323)
323 599
599-5000
5000
37
37
COMPATIBLE SERIES:
MODEL
NO.
VAC
TUNGSTEN
(WATTS)
GENERATOR
(VA)
TURN ON
FOOT CANDLES
TURN OFF
FOOT CANDLES
COLOR
ILAPHCU
105-305
1000
1800
1.5fc
2.25 +/-.2fc
2-5 second delay
Blue
ORDERING OPTIONS
TYPE
ACCESSORY
COLOR
ILA = INDUCTION
LUMINAIRE ACCESSORY
PHC = PHOTOCELL
U = BLUE
PHOTOCELL-10
The Photocell-10 has a three blade plug-in locking electrical connection
and is available with user specified switch on illumination levels, specified
switch on/switch off levels and user specified time delays. Photocell-10
has a North facing window. It incorporates a state of the art microcontroller
and a silicon integrated photodiode and amplifier with spectral and angular
response. Meets RoHS and WEEE Standards.
TECHNICAL SPECIFICATIONS
COMPATIBLE SERIES:
TEMPERATURE
RANGE
COMPLIANCE
IP RATING
MATERIAL
-40F to 158F
(-40C to 76C)
CE and UL
IP67
ACRYLIC
SWITCH
TYPE
LIGHT
SENSOR
COLOR CORRECTED
RELAY ASSISTED
SILICON PHOTODIODE
TRIAC (RAT)
+ AMPLIFIER
ELECTRICAL SPECIFICATIONS
ORDERING OPTIONS
TYPE
ACCESSORY
COLOR
ILA = INDUCTION
LUMINAIRE ACCESSORY
PHC = PHOTOCELL
U = BLUE
WARRANTY
10 = 10 YEARS
POWER
CONSUMPTION
VAC
>350mW nominal
@230V AC
105-305
TUNGSTEN
LOAD
(WATTS)
RATING (VA)
1000
1800VA
1000W
TURN ON
FOOT
CANDLES
TURN OFF
FOOT
CANDLES
LOAD CURRENT
CONTINUOUS
3.0 fc
1+/- 0.5 fc
2-5 second delay
16 amps
50/60Hz AC
COMPATIBLE SERIES:
38
MODELS
FOR USE
WITH WATTAGES
ACRYLIC REFRACTOR
DIAMETER
HH-ILPF00020
HH-ILPF00022
300W, 400W
www.fulham.com
PART
NUMBER
MATERIAL
WIRE
THICKNESS
(mm)
OVERALL
DIAMETER
(In.)
HEIGHT
(In.)
CORROSION
RESISTANT
FINISH
ILASGAL
STEEL
2mm
24.44"
1.97"
YES
METAL
ORDERING OPTIONS
COMPATIBLE SERIES:
TYPE
ACCESSORY
TYPE
FINISH
ILA = INDUCTION
LUMINAIRE ACCESSORY
SG = SAFE/WIRE GUARD
A = TYPE A
L = METAL FINISH
WIRE GUARD B
Fulham wire guards are designed to protect luminaires from inadvertent
damage while maintaining optimum visibility. Wire Guard B helps protect
Highbay luminaires from physical damage such as vandalism and tampering.
It is designed to easily attach to Fulhams HB03 and HB06 Luminaire Series.
Wire Guard B has a metallic, neat, no cold-jointed and distortionless finish.
The wire is 2.5mm in diameter and is made of high quality steel.
PART
NUMBER
MATERIAL
WIRE
THICKNESS
(mm)
OVERALL
DIAMETER
(In.)
HEIGHT
(In.)
CORROSION
RESISTANT
FINISH
ILASGBL
STEEL
2.50mm
21.09"
4.59"
YES
METAL
ORDERING OPTIONS
COMPATIBLE SERIES:
TYPE
ACCESSORY
TYPE
FINISH
ILA = INDUCTION
LUMINAIRE ACCESSORY
SG = SAFE/WIRE GUARD
B = TYPE B
L = METAL FINISH
WIRE GUARD C
Fulham wire guards are designed to protect luminaires from inadvertent damage
while maintaining optimum visibility. Wire Guard C helps protect Highbay luminaires from physical damage such as vandalism and tampering. It is designed
to easily attach to Fulhams HB02 Luminaire Series. Wire Guard C has a white,
neat, no cold-jointed and distortionless finish. The wire is 4mm in diameter and is
made of high quality steel.
PART
NUMBER
MATERIAL
WIRE
THICKNESS
(mm)
OVERALL
DIAMETER
(In.)
HEIGHT
(In.)
CORROSION
RESISTANT
FINISH
ILASGCW
STEEL
4.00mm
30.23"
5.35"
YES
WHITE
ORDERING OPTIONS
COMPATIBLE SERIES:
TYPE
ACCESSORY
TYPE
FINISH
ILA = INDUCTION
LUMINAIRE ACCESSORY
SG = SAFE/WIRE GUARD
C = TYPE C
W = WHITE FINISH
(323)
323 599
599-5000
5000
39
39
INDUCTION
SYSTEM WATTAGE
TRANSFORMER
MODEL
LOSSES
INPUT CURRENT
MAX LOAD
INPUT CURRENT
NO LOAD
WEIGHT
LBS
35W-100W
120W-200W
250W-400W
HH-ILS-SD-1-125VA*
HH-ILS-SD-2-245VA*
HH-ILS-SD-3-460VA*
7W
10W
18W
0.26A
0.57A
0.96A
0.070A
0.080A
0.220A
2.3
5.3
7.2
40
TRANSFORMER
MODEL
GENERATOR
TYPE
HHILPQ32840
HHILPQ-125VA
HHILPQ-245VA
HHILPQ-460VA
DISC
www.fulham.com
1st DIGIT
SOLID OBJECT
PROTECTION
2nd DIGIT
WATER
PROTECTION
Not protected
Not protected
Protected against
solid objects greater
than 50mm
Protected against
solid objects greater
than 12.5mm
Protected against
solid objects greater
than 2.5mm
Protected against
solid objects greater
than 1.0mm
Protected from the
amount of dust
required to prevent
operation
1
2
3
4
5
Completely
dust tight
IP
CODE LETTERS
1st DIGIT
2nd DIGIT
1
2
3
Protected against
vertically dripping
water
Protected against
dripping water when
tilted up to 15
Protected against
water spraying
from above
Protected against
splashing water
Protected against
jetting water
6
7
8
Protected against
powerfully jetting
water
Protected against
temporary immersion
in water
Protected against
continuous immersion in water
EXAMPLES:
IP 20: Protected against solid objects greater than 12.5mm, no protection from water.
IP 43: Protected against solid objects greater than 1mm, protected from spraying water.
IP 65: Completely protected against solid objects and dust, protected from water jets
from any direction.
(323)
323 599
599-5000
5000
41
41
How does Induction work, and why do Induction lamps and luminaires
last so long?
Conventional gas discharge lamps rely on an electrode (the filament) for
ignition and operation. The electrode is similar to a spark plug in a car, that
will eventually fail to produce an effective spark in the combustion chamber.
By contrast, Induction is a hybrid fluorescent technology that operates
without the use of electrodes. Instead, an electrical current is used to create
an electromagnetic field and invisible UV radiation within an Induction lamp.
This energy is then converted to visible light by the phosphor that coats the
glass inside the lamp.
By eliminating the electrode, and by using high efficiency electronic power
management, the life of the induction lamp is lengthened dramatically rated
at 100,000 hours.
Visible Light
UV Light
Glass Envelope/Tube
Phosphor Coating
Inert Gas Fill
Magnetic Field
Inductor Assembly
Induction Coil
Inert Gas Fill
Wires to Generator
Mercury Amalgam
Visible Light
42
www.fulham.com
(323)
323 599
599-5000
5000
43
43
V145