Escolar Documentos
Profissional Documentos
Cultura Documentos
OCTOBER 2013
SAMPLING PROCEDURES
AND TABLES FOR INSPECTION
BY ATTRIBUTES
This standard is a reaffirmation of ANSI/ASQ Z1.42003 (R2008)
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
00.Z1.4.fm(i-vi).qxd:00.Z1.4.fm(i-vi).qxd
10/9/13
10:01 COPYING
AM Page i
SINGLE-USER LICENSE
ONLY,
ABSTRACT
Sampling Procedures and Tables for Inspection by Attributes is an acceptance sampling system to be used with switching
rules on a continuing stream of lots for AQL specified. It provides tightened, normal, and reduced plans to be applied for
attributes inspection for percent nonconforming or nonconformities per 100 units.
A MERICA N NATIONA L STA NDA RD: An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An American National Standard is intended as a guide to aid the manufacturer, the
consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standard. American National Standards are subject to periodic review and users are
cautioned to obtain the latest edition.
CA UTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the
American National Standards Institute require that action be taken to reaffirm, revise, or withdraw this standard no later
than five years from the date of publication. Purchasers of American National Standards may receive current information
on all standards by calling or writing the American National Standards Institute.
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
00.Z1.4.fm(i-vi).qxd:00.Z1.4.fm(i-vi).qxd
10/9/13
10:01 COPYING
AM Page ii AND
SINGLE-USER LICENSE
ONLY,
NETWORKING PROHIBITED.
2013 by ASQ
Copyright protection notice for the A NSI/A SQ Z1.4-2003 (R2013) Standard.
This Standard is subject to copyright claims of ANSI, and ASQ. Not for resale. No part of this publication may be
reproduced in any form, including an electronic retrieval system, without the prior written permission of ASQ.
All requests pertaining to the ANSI/ASQ Z1.4-2003 (R2013) Standard should be submitted to ASQ.
ASQ will consider requests for change and information on the submittal of such requests regarding this Standard.
All requests should be in writing to the attention of the Standards Administrator at the address below.
A SQ Mission: The American Society for Quality advances individual and organizational performance
excellence worldwide by providing opportunities for learning, quality improvement, and knowledge exchange.
Published by:
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
00.Z1.4.fm(i-vi).qxd:00.Z1.4.fm(i-vi).qxd
10/9/13
10:01 COPYING
AM Page iii
SINGLE-USER LICENSE
ONLY,
AND
NETWORKING PROHIBITED.
Foreword
ANSI/ASQ Z1.4-2003 (R2013) is a very minor revision of ANSI/ASQ Z1.4-2003 (R2008),
Sampling Procedures and Tables for Inspection by A ttributes, also referred to as ANSI/ASQ Z1.4-2008.
Changes:
Table III A Double Sampling Plans for Normal Inspection (Master table)
In the title Acceptance Quality Limit, changed the word reduced to normal inspection.
Table VIII Limit Numbers for Reduced Inspection
In column 4.0 for 1250-1999, changed Acceptance Quality Limits from 49 to 40.
Table X-D-1 Tabulated Values for Operating Characteristic Curves for Single Sampling Plans
In column 1.5 for 95.0, changed 0639 to 0.639
Table X-H-1 Tabulated Values for Operating Characteristic Curves for Single Sampling Plans
In column 1.0 for 50.0, changed 33.3 to 3.33
Table X-N-2 Sampling Plans for Sample Size Codes
In column 0.040, changed Use Code Letter from N to M
In the first X column, changed Use Code Letter from R to Q
In column 0.065, changed Use Code Letter from Q to P
Suggestions for improvement of this standard are welcomed. Send your comments to the sponsor,
ASQ Standards, 600 North Plankinton Avenue, Milwaukee, WI 53203 or standards@asq.org.
iii
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
00.Z1.4.fm(i-vi).qxd:00.Z1.4.fm(i-vi).qxd
10/9/13
10:01 COPYING
AM Page iv AND
SINGLE-USER LICENSE
ONLY,
NETWORKING PROHIBITED.
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
00.Z1.4.fm(i-vi).qxd:00.Z1.4.fm(i-vi).qxd
10/9/13
10:01 COPYING
AM Page v
SINGLE-USER LICENSE
ONLY,
Table of Contents
Paragraph
Page
1. SCOPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. DEFINITIONS AND TERMINOLOGY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3. PERCENT NONCONFORMING AND NONCONFORMITIES PER
HUNDRED UNITS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4. ACCEPTANCE QUALITY LIMIT (AQL). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5. SUBMISSION OF PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6. ACCEPTANCE AND NON-ACCEPTANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
7. DRAWING OF SAMPLES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
8. NORMAL, TIGHTENED, AND REDUCED INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
9. SAMPLING PLANS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
10. DETERMINATION OF ACCEPTABILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
11. SUPPLEMENTARY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tables
Table I
Table II-A
Table II-B
Table II-C
Table III-A
Table III-B
Table III-C
Table IV-A
Table IV-B
Table IV-C
Table V-A
Table V-B
Table VI-A
Table VI-B
Table VII-A
Table VII-B
Table VIII
Table IX
Table X-A
Table X-B
Table X-C
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
00.Z1.4.fm(i-vi).qxd:00.Z1.4.fm(i-vi).qxd
10/9/13
10:01 COPYING
AM Page vi AND
SINGLE-USER LICENSE
ONLY,
NETWORKING PROHIBITED.
Table X-D
Table X-E
Table X-F
Table X-G
Table X-H
Table X-J
Table X-K
Table X-L
Table X-M
Table X-N
Table X-P
Table X-Q
Table X-R
Table X-S
Table XI
vi
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 1
SINGLE-USER LICENSE
ONLY,
COPYING
1.
SCOPE
2.
a. End items.
d. Materials in process.
e. Supplies in storage.
f. Maintenance operations.
NONCONFORMITY: A departure of a quality characteristic from its intended level or state that occurs
with severity sufficient to cause an associated product or service not to meet a specification requirement.
g. Data or records.
h. Administrative procedures.
These plans are intended primarily to be used for a continuing series of lots or batches. The plans may also be used for
the inspection of isolated lots or batches, but, in this latter
case, the user is cautioned to consult the operating characteristic curves to find a plan which will yield the desired protection (see 11.6).
1.3 INSPECTION. Inspection is the process of measuring, examining, testing, or otherwise comparing the unit of
product (see 1.5) with the requirements.
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 2
SINGLE-USER LICENSE
ONLY,
COPYING
3.2 PERCENT NONCONFORMING. The percent nonconforming of any given quantity of units of product is one
hundred times the number of nonconforming units divided
by the total number of units of product, i.e.:
Percent nonconforming =
Number nonconforming
100
Number of units inspected
The AQL alone does not describe the protection to the consumer for individual lots or batches, but more directly relates
to what is expected from a series of lots or batches provided
the provisions of this standard are satisfied.
4.1 USE. The AQL together with the Sample Size Code
Letter, is used for indexing the sampling plans provided herein.
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 3
SINGLE-USER LICENSE
ONLY,
COPYING
SUBMISSION OF PRODUCT
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 4
SINGLE-USER LICENSE
ONLY,
COPYING
The supplier may be required at the discretion of the responsible authority to inspect every unit of the lot or batch for
designated classes of nonconformities. The right is reserved
to inspect every unit submitted by the supplier for specified
nonconformities, and to reject the lot or batch immediately,
when a nonconformity of this class is found. The right is
reserved also to sample, for specified classes of nonconformities, lots or batches submitted by the supplier and to reject
any lot or batch if a sample drawn therefrom is found to contain one or more of these nonconformities.
8.3
SWITCHING PROCEDURES.
DRAWING OF SAMPLES
a. The preceding 10 lots or batches (or more, as indicated by the note to Table VIII) have been on normal inspection and all have been accepted on
original inspection; and
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 5
SINGLE-USER LICENSE
ONLY,
COPYING
b. The total number of nonconforming units (or nonconformities) in the samples from the preceding 10
lots or batches (or such other number as was used
for condition a above) is equal to or less than the
applicable limit number given in Table VIII (see
8.5). If double or multiple sampling is in use, all
samples inspected should be included, not first
samples only; and
9.2 INSPECTION LEVEL. The inspection level determines the relationship between the lot or batch size and the
sample size. The inspection level to be used for any particular requirement will be prescribed by the responsible
authority. Three inspection levels: I, II and III are given in
Table I for general use. Unless otherwise specified,
Inspection Level II will be used. However, Inspection Level
I may be specified when less discrimination is needed, or
Level III may be specified for greater discrimination. Four
additional special levels: S-1, S-2, S-3, and S-4, are given
in the same table and may be used where relatively small
sample sizes are necessary and large sampling risks can or
must be tolerated.
8.3.4 REDUCED TO NORMAL. When reduced inspection is in effect, normal inspection shall be instituted if any
of the following occur on original inspection:
SAMPLING PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 6
SINGLE-USER LICENSE
ONLY,
COPYING
DETERMINATION OF ACCEPTABILITY
11.
SUPPLEMENTARY INFORMATION
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 7
SINGLE-USER LICENSE
ONLY,
COPYING
11.6
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 8
SINGLE-USER LICENSE
ONLY,
COPYING
with the AQL and Inspection Level specified for the inspection of a series of lots or batches. For example, if an LQ of
5 percent is desired for individual lots with an associated Pa
of 10 percent or less, then if an AQL of 1.5 percent is designated for inspection of a series of lots or batches. Table VI
indicates that the minimum sample size must be that given
by Code Letter M.
Tables VI and VII give process levels for which the probabilities of lot acceptance under various sampling plans are
10 percent and 5 percent respectively. If a different value of
consumers risk is required, the O.C. curves and their tabulated values may be used. For individual lots with percents
nonconforming or nonconformities per 100 units equal to the
specified Limiting Quality (LQ) values, the probabilities of
lot acceptance are less than 10 percent in the case of plans
listed in Table VI and less than 5 percent in the case of
plans listed in Table VII. When there is reason for avoiding
more than a limiting percentage of nonconforming units (or
nonconformities) in a lot or batch, Tables VI and VII may be
useful for fixing minimum sample sizes to be associated
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
REDUCED
Preceding 10 Lots
Accepted, with
Total Nonconforming
less than Limit Number
(Optional), and
Production Steady,
and
Approved by
Responsible Authority
FIGURE 1
NORMAL
START
5 Consecutive
Lots Accepted
2 of 5 or fewer
Consecutive Lots are
Not Accepted
Discontinue
Inspection
Under Z1.4
TIGHTENED
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 9
SINGLE-USER LICENSE
ONLY,
COPYING
SWITCHING
RULES
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
to
to
to
to
to
to
to
to
and
151
281
501
1201
3201
10001
35001
150001
500001
to
to
to
to
to
to
CODE
LETTERS
26
51
91
2
9
16
3200
10000
35000
280
500
1200
50
90
150
8
15
25
150000
500000
over
D
D
D
C
C
C
B
B
C
A
B
B
A
A
A
S-1
E
E
E
D
D
D
C
C
C
B
B
B
A
A
A
S-2
G
G
H
E
F
F
D
D
E
B
C
C
A
A
B
S-3
J
J
K
G
G
H
E
E
F
C
C
D
A
A
B
S-4
L
M
N
H
J
K
E
F
G
C
C
D
A
A
B
N
P
Q
K
L
M
G
H
J
D
E
F
A
B
C
II
P
Q
R
L
M
N
H
J
K
E
F
G
B
C
D
III
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 10
SINGLE-USER LICENSE
ONLY,
COPYING
10
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
2
3
5
8
13
20
32
50
80
125
200
315
500
800
1250
2000
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
11
1 2
2 3
3 4
5 6
1 2
2 3 3 4 5 6 7 8 10 11 14 15 21 22 30 31 44 45
3 4 5 6 7 8 10 11 14 15 21 22 30 31 44 45
5 6 7 8 10 11 14 15 21 22
3 4 5 6 7 8 10 11 14 15 21 22
5 6 7 8 10 11 14 15 21 22
7 8 10 11 14 15 21 22
1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22 30 31
2 3 3 4 5 6 7 8 10 11 14 15 21 22 30 31 44 45
3 4 5 6 7 8 10 11 14 15 21 22 30 31 44 45
3 4 5 6 7 8 10 11 14 15 21 22
5 6 7 8 10 11 14 15 21 22
7 8 10 11 14 15 21 22
1 2
1 2 2 3
2 3 3 4
1 2
1 2 2 3
1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22
1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22
2 3 3 4 5 6 7 8 10 11 14 15 21 22
1 2
1 2 2 3
1 2 2 3 3 4
2 3 3 4 5 6 7 8 10 11 14 15 21 22
1 2 2 3
1 2 2 3 3 4
1 2 2 3 3 4 5 6
0 1
0 1
0 1
0 1
= Use the first sampling plan below the arrow. If sample size equals, or exceeds, lot size, carry out 100 percent inspection.
1 2
0 1
Re = Rejection number.
Ac = Acceptance number.
0 1
0 1
0 1
0 1
0 1
0 1
0 1
0 1
0 1
0 1
Sample
size
Sample 0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0
1.5
2.5
4.0
6.5
10
15
25
40
65
100 150 250 400 650 1000
code
size
letter
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
Acceptance Quality Limits, AQLs, in Percent Nonconforming Items and Nonconformities per 100 Items (Normal Inspection)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 11
SINGLE-USER LICENSE
ONLY,
COPYING
SINGLE
NORMAL
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
2
3
5
8
13
20
32
50
80
125
200
315
500
800
1250
2000
3150
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
1 2
1 2 2 3
1 2
2 3
3 4
1 2 2 3
2 3 3 4
3 4 5 6
8 9 12 13 18 19
2 3 3 4 5 6 8 9 12 13 18 19
3 4 5 6 8 9 12 13 18 19
5 6 8 9 12 13 18 19
3 4 5 6 8 9 12 13 18 19 27 28 41 42
5 6 8 9 12 13 18 19 27 28 41 42
8 9 12 13 18 19
2 3 3 4 5 6 8 9 12 13 18 19
3 4 5 6 8 9 12 13 18 19
5 6 8 9 12 13 18 19
1 2
1 2 2 3
1 2 2 3 3 4 5 6 8 9 12 13 18 19
1 2 2 3 3 4 5 6 8 9 12 13 18 19
1 2 2 3 3 4 5 6 8 9 12 13 18 19
0 1
0 1
1 2
1 2 2 3 3 4 5 6 8 9 12 13 18 19 27 28
1 2 2 3 3 4 5 6 8 9 12 13 18 19 27 28 41 42
2 3 3 4 5 6 8 9 12 13 18 19 27 28 41 42
= Use first sampling plan below arrow. If sample size equals or exceeds lot or batch size, do 100 percent inspection.
1 2
1 2
1 2 2 3
1 2 2 3 3 4
0 1
1 2 2 3 3 4 5 6
0 1
Re = Rejection number.
Ac = Acceptance number.
0 1
0 1
0 1
0 1
0 1
0 1
0 1
0 1
0 1
0 1
0 1
Sample
size
Sample 0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0
1.5
2.5
4.0
6.5
10
15
25
40
65
100 150 250 400 650 1000
code
size
letter
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
SINGLE
TIGHTENED
PLANS
Acceptance Quality Limits (tightened inspection)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 12
SINGLE-USER LICENSE
ONLY,
COPYING
12
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
2
2
2
3
5
8
13
20
32
50
80
125
200
315
500
800
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
13
0 2
1 3 1 4 2 5 3 6
0 2 1 3
0 2 1 3 1 4
0 2 1 3 1 4 2 5
0 1
0 2
0 2 1 3
0 2 1 3 1 4
5 8 7 10 10 13
1 4 2 5
2 5 3 6
3 6 5 8
0 2
0 2 1 3
1 3 1 4
2 5 3 6 5 8 7 10 10 13 14 17 21 24
3 6 5 8 7 10 10 13 14 17 21 24
5 8 7 10 10 13
1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22 30 31
1 3 2 4 3 5 5 6 7 8 10 11 14 15 21 22 30 31
1 4 2 5 3 6 5 8 7 10 10 13 14 17 21 24
3 6 5 8 7 10 10 13
5 8 7 10 10 13
7 10 10 13
1 3 1 4
1 4 2 5
2 5 3 6
0 2
0 2 1 3
3 6 5 8 7 10 10 13
5 8 7 10 10 13
7 10 10 13
1 3
1 4
2 5
0 2
1 4 2 5 3 6 5 8 7 10 10 13
2 5 3 6 5 8 7 10 10 13
3 6 5 8 7 10 10 13
0 2 1 3 1 4 2 5
0 2 1 3 1 4 2 5 3 6
1 3 1 4 2 5 3 6 5 8
0 1
0 1
0 1
= Use first sampling plan below arrow. If sample size equals or exceeds lot or batch size, do 100 percent inspection.
0 2
0 1
= If the acceptance number has been exceeded, but the rejection number has not been reached, accept the lot, but reinstate normal inspection (see 10.1.4).
Re = Rejection number.
Ac = Acceptance number.
0 1
0 1
0 1
0 1
0 1
0 1
0 1
0 1
0 1
0 1
Sample
size
Sample 0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0
1.5
2.5
4.0
6.5
10
15
25
40
65
100 150 250 400 650 1000
code
size
letter
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 13
SINGLE-USER LICENSE
ONLY,
COPYING
SINGLE
REDUCED
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
Sample size
code letter
DOUBLE
NORMAL
PLANS
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
Sample
Sample size
0.25
0.40
0.65
1.0
1.5
2.5
4.0
6.5
10
15
25
0
1
2
2
0
1
0
3
2
2
3
4
0
1
0
3
1
4
2
2
3
4
4
5
0
1
0
3
1
4
2
6
2
2
3
4
4
5
5
7
0
1
0
3
1
4
2
6
3
8
2
2
3
4
4
5
5
7
7
9
0 2
1 2
0 3
3 4
1 4
4 5
2 5
6 7
3 7
8 9
5 9
12 13
0 2
1 2
0 3
3 4
1 4
4 5
2 5
6 7
3 7
8 9
5 9
12 13
7 11
18 19
0
1
0
3
1
4
2
6
3
8
5
12
7
18
11
26
2
2
3
4
4
5
5
7
7
9
9
13
11
19
16
27
0
1
0
3
1
4
2
6
3
8
5
12
7
18
11
26
2
2
3
4
4
5
5
7
7
9
9
13
11
19
16
27
0
1
0
3
1
4
2
6
3
8
5
12
7
18
11
26
2
2
3
4
4
5
5
7
7
9
9
13
11
19
16
27
0
1
0
3
1
4
2
6
3
8
5
12
7
18
11
26
2
2
3
4
4
5
5
7
7
9
9
13
11
19
16
27
0
1
0
3
1
4
2
6
3
8
5
12
7
18
11
26
2
2
3
4
4
5
5
7
7
9
9
13
11
19
16
27
0
1
0
3
1
4
2
6
3
8
5
12
7
18
11
26
2
2
3
4
4
5
5
7
7
9
9
13
11
19
16
27
0
1
0
3
1
4
2
6
3
8
5
12
7
18
11
26
2
2
3
4
4
5
5
7
7
9
9
13
11
19
16
27
0
1
0
3
1
4
2
6
3
8
5
12
7
18
11
26
2
2
3
4
4
5
5
7
7
9
9
13
11
19
16
27
0
3
1
4
2
6
3
8
5
12
7
18
11
26
3
4
4
5
5
7
7
9
9
13
11
19
16
27
= Use first sampling plan below arrow. If sample size equals or exceeds lot or batch size, do 100 percent inspection.
2
4
3
6
5
10
8
16
13
26
20
40
32
64
50
100
80
160
125
250
200
400
315
630
500
1000
800
1600
1250
2500
Cumulative
sample size
+ = Use corresponding single sampling plan or double sampling plan for code letter B below.
Re = Rejection number.
Ac = Acceptance number.
2
2
3
3
5
5
8
8
13
13
20
20
32
32
50
50
80
80
125
125
200
200
315
315
500
500
800
800
1250
1250
0.15
40
65
100
150
250
400
650
1000
1
4
2
6
3
8
5
12
7
18
11
26
4
5
5
7
7
9
9
13
11
19
16
27
2
6
3
8
5
12
7
18
11
26
5
7
7
9
9
13
11
19
16
27
+
3
8
5
12
7
18
11
26
7
9
9
13
11
19
16
27
5
12
7
18
11
26
17
37
9
13
11
19
16
27
22
38
7
18
11
26
17
37
25
56
11
19
16
27
22
38
31
57
11
26
17
37
25
56
16
27
22
38
31
57
17
37
25
56
22 25 31
38 56 57
31
57
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 14
SINGLE-USER LICENSE
ONLY,
COPYING
14
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
Sample size
code letter
15
A
2
4
3
6
5
10
8
16
13
26
20
40
32
64
50
100
80
160
125
250
200
400
315
630
500
1000
800
1600
1250
2500
2000
4000
Sample size
2
2
3
3
5
5
8
8
13
13
20
20
32
32
50
50
80
80
125
125
200
200
315
315
500
500
800
800
1250
1250
2000
2000
Sample
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
0.15
0.25
0.40
0.65
1.0
1.5
2.5
4.0
6.5
10
15
25
40
65
100
150
250
400
650
1000
0
1
2
2
0
1
2
2
0
1
0
3
2
2
3
4
0
1
0
3
1
4
2
2
3
4
4
5
0
1
0
3
1
4
2
6
2
2
3
4
4
5
5
7
0 2
1 2
0 3
3 4
1 4
4 5
2 5
6 7
3 7
11 12
0 2
1 2
0 3
3 4
1 4
4 5
2 5
6 7
3 7
11 12
6 10
15 16
0
1
0
3
1
4
2
6
3
11
6
15
9
23
2
2
3
4
4
5
5
7
7
12
10
16
14
24
0
1
0
3
1
4
2
6
3
11
6
15
9
23
2
2
3
4
4
5
5
7
7
12
10
16
14
24
0
1
0
3
1
4
2
6
3
11
6
15
9
23
2
2
3
4
4
5
5
7
7
12
10
16
14
24
0
1
0
3
1
4
2
6
3
11
6
15
9
23
2
2
3
4
4
5
5
7
7
12
10
16
14
24
0
1
0
3
1
4
2
6
3
11
6
15
9
23
2
2
3
4
4
5
5
7
7
12
10
16
14
24
0
1
0
3
1
4
2
6
3
11
6
15
9
23
2
2
3
4
4
5
5
7
7
12
10
16
14
24
0
1
0
3
1
4
2
6
3
11
6
15
9
23
2
2
3
4
4
5
5
7
7
12
10
16
14
24
0
1
0
3
1
4
2
6
3
11
6
15
9
23
2
2
3
4
4
5
5
7
7
12
10
16
14
24
0
1
0
3
1
4
2
6
3
11
6
15
9
23
2 0 3 1
2 3 4 4
3 1 4 2
4 4 5 6
4 2 5 3
5 6 7 11
5 3 7 6
7 11 12 15
7 6 10 9
12 15 16 23
10 9 14
16 23 24
14
24
+ = Use corresponding single sampling plan or double sampling plan for code letter B below.
Re = Rejection number.
Ac = Acceptance number.
4 2 5 3 7 6
5 6 7 11 12 15
5 3 7 6 10 9
7 11 12 15 16 23
7 6 10 9 14 15
12 15 16 23 24 34
10 9 14 15 20 23
16 23 24 34 35 52
14
24
10
16
14
24
20
35
29
53
9
23
15
34
23
52
14
24
20
35
29
53
15
34
23
52
20 23 29
35 52 53
29
53
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
= Use first sampling plan below arrow. If sample size equals or exceeds lot or batch size, do 100 percent inspection.
Cumulative
sample size
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 15
SINGLE-USER LICENSE
ONLY,
COPYING
DOUBLE
TIGHTENED
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
Sample size
code letter
DOUBLE
REDUCED
PLANS
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
First
Second
Sample
Sample size
0.25
0.40
0.65
1.0
1.5
2.5
4.0
6.5
10
15
25
0
0
2
2
0
0
0
0
2
2
3
4
0
0
0
0
0
1
2
2
3
4
4
5
0
0
0
0
0
1
0
3
2
2
3
4
4
5
4
6
0
0
0
0
0
1
0
3
1
4
2
2
3
4
4
5
4
6
5
7
0
0
0
0
0
1
0
3
1
4
2
6
2
2
3
4
4
5
4
6
5
7
7
9
0 2
0 2
0 3
0 4
0 4
1 5
0 4
3 6
1 5
4 7
2 7
6 9
3 8
8 12
0 2
0 2
0 3
0 4
0 4
1 5
0 4
3 6
1 5
4 7
2 7
6 9
3 8
8 12
5 10
12 16
0 2
0 2
0 3
0 4
0 4
1 5
0 4
3 6
1 5
4 7
2 7
6 9
3 8
8 12
5 10
12 16
0 2
0 2
0 3
0 4
0 4
1 5
0 4
3 6
1 5
4 7
2 7
6 9
3 8
8 12
5 10
12 16
0 2
0 2
0 3
0 4
0 4
1 5
0 4
3 6
1 5
4 7
2 7
6 9
3 8
8 12
5 10
12 16
0 2
0 2
0 3
0 4
0 4
1 5
0 4
3 6
1 5
4 7
2 7
6 9
3 8
8 12
5 10
12 16
40
65
100
150
+
+
+ = Use corresponding single sampling plan or double sampling plan for code letter D below.
= If, after the second sample, the acceptance number has been exceeded, but the rejection number has not been reached,
accept the lot, but reinstate normal inspection (see 10.1.4).
Re = Rejection number.
+
+
0 2 0 3 0 4 0 4 1 5 2 7 3 8 5
0 2 0 4 1 5 3 6 4 7 6 9 8 12 12
0 3 0 4 0 4 1 5 2 7 3 8 5 10 7
0 4 1 5 3 6 4 7 6 9 8 12 12 16 18
0 4 0 4 1 5 2 7 3 8 5 10
1 5 3 6 4 7 6 9 8 12 12 16
0 4 1 5 2 7 3 8 5 10
3 6 4 7 6 9 8 12 12 16
1 5 2 7 3 8 5 10
4 7 6 9 8 12 12 16
2 7 3 8 5 10
6 9 8 12 12 16
3 8 5 10
8 12 12 16
5 10
12 16
= Use first sampling plan below arrow. If sample size equals or exceeds lot or batch size, do 100 percent inspection.
2
4
3
6
5
10
8
16
13
26
20
40
32
64
50
100
80
160
125
250
200
400
315
630
500
1000
Cumulative
sample size
Ac = Acceptance number.
2
2
3
3
5
5
8
8
13
13
20
20
32
32
50
50
80
80
125
125
200
200
315
315
500
500
0.15
250
400
650
1000
10 7 12 11 17
16 18 22 26 30
12 11 17
22 26 30
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 16
SINGLE-USER LICENSE
ONLY,
COPYING
16
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
Sample size
code letter
17
A
B
C
2
4
6
8
10
12
14
3
6
9
12
15
18
21
5
10
15
20
25
30
35
8
16
24
32
40
48
56
13
26
39
52
65
78
91
20
40
60
80
100
120
140
Sample size
2
2
2
2
2
2
2
3
3
3
3
3
3
3
5
5
5
5
5
5
5
8
8
8
8
8
8
8
13
13
13
13
13
13
13
20
20
20
20
20
20
20
Sample
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
0.15
0.25
0.40
0.65
1.0
1.5
2.5
4.0
6.5
10
15
25
40
65
100
150
250
400
650
1000
#
#
0
0
1
1
2
2
2
2
3
3
3
3
#
#
0
0
1
1
2
#
0
0
1
2
3
4
2
2
2
3
3
3
3
2
3
3
4
4
5
5
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
# 2
# 2
0 2
0 3
1 3
1 3
2 3
# 2
0 3
0 3
1 4
2 4
3 5
4 5
# 3
0 3
1 4
2 5
3 6
4 6
6 7
# 4
1 5
2 6
3 7
5 8
7 9
9 10
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
6
8
10
11
12
14
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
++ = Use corresponding double sampling plan or multiple sampling plan for code letter D below.
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
8
10
13
15
17
19
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
8
10
13
15
17
19
7
10
13
17
20
23
26
++
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
1
4
8
12
17
21
25
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
1
4
8
12
17
21
25
2
7
13
19
25
31
37
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
8
10
13
15
17
19
7
10
13
17
20
23
26
9
14
19
25
29
33
38
++
++
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
1
4
8
12
17
21
25
2
7
13
19
25
31
37
0
1
3
5
7
10
13
0
3
6
8
11
14
18
1
4
8
12
17
21
25
2
7
13
19
25
31
37
4
6
8
10
11
12
14
5
8
10
13
15
17
19
7
10
13
17
20
23
26
9
14
19
25
29
33
38
++
++
0
3
6
8
11
14
18
1
4
8
12
17
21
25
2
7
13
19
25
31
37
5
8
10
13
15
17
19
7
10
13
17
20
23
26
9
14
19
25
29
33
38
++
++
1
4
8
12
17
21
25
2
7
13
19
25
31
37
7
10
13
17
20
23
26
9
14
19
25
29
33
38
++
++
2
7
13
19
25
31
37
4
11
19
27
36
45
53
9
14
19
25
29
33
38
12
19
27
34
40
47
54
++
++
4
11
19
27
36
45
53
6
17
29
40
53
65
77
12
19
27
34
40
47
54
16
27
39
49
58
68
78
++
++
6
17
29
40
53
65
77
16
27
39
49
58
68
78
++
++
##
##
##
Re = Rejection number.
Ac = Acceptance number.
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
8
10
13
15
17
19
7
10
13
17
20
23
26
9
14
19
25
29
33
38
++
++
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
= Use first sampling plan below arrow (refer to continuation of table on following page,
when necessary). If sample size equals or exceeds lot or batch size, do 100 percent inspection.
Cumulative
sample size
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 17
SINGLE-USER LICENSE
ONLY,
COPYING
MULTIPLE
NORMAL
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
Sample size
code letter
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
32
64
96
128
160
192
224
50
100
150
200
250
300
350
80
160
240
320
400
480
560
125
250
375
500
625
750
875
200
400
600
800
1000
1200
1400
315
630
945
1260
1575
1890
2205
500
1000
1500
2000
2500
3000
3500
Cumulative
sample size
0.15
0.25
0.40
0.65
1.0
1.5
2.5
4.0
6.5
10
15
(Continued)
25
40
65
100
150
250
400
650
1000
#
#
0
0
1
1
2
2
2
2
3
3
3
3
#
#
0
0
1
1
2
#
0
0
1
2
3
4
2
2
2
3
3
3
3
2
3
3
4
4
5
5
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
# 2
# 2
0 2
0 3
1 3
1 3
2 3
# 2
0 3
0 3
1 4
2 4
3 5
4 5
# 2
0 3
1 4
2 5
3 6
4 6
6 7
# 4
1 5
2 6
3 7
5 8
7 9
9 10
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
6
8
10
11
12
14
Re = Rejection number.
Ac = Acceptance number.
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
1
4
8
12
17
21
25
2
7
13
19
25
31
37
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
8
10
13
15
17
19
7
10
13
17
20
23
26
9
14
19
25
29
33
38
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
1
4
8
12
17
21
25
2
7
13
19
25
31
37
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
8
10
13
15
17
19
7
10
13
17
20
23
26
9
14
19
25
29
33
38
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
1
4
8
12
17
21
25
2
7
13
19
25
31
37
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
8
10
13
15
17
19
7
10
13
17
20
23
26
9
14
19
25
29
33
38
0
1
3
5
7
10
13
0
3
6
8
11
14
18
1
4
8
12
17
21
25
2
7
13
19
25
31
37
4
6
8
10
11
12
14
5
8
10
13
15
17
19
7
10
13
17
20
23
26
9
14
19
25
29
33
38
0
3
6
8
11
14
18
1
4
8
12
17
21
25
2
7
13
19
25
31
37
5
8
10
13
15
17
19
7
10
13
17
20
23
26
9
14
19
25
29
33
38
1
4
8
12
17
21
25
2
7
13
19
25
31
37
7
10
13
17
20
23
26
9
14
19
25
29
33
38
2
7
13
19
25
31
37
9
14
19
25
29
33
38
= Use first sampling plan above arrow (refer to preceding page, when necessary).
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
8
10
13
15
17
19
7
10
13
17
20
23
26
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
8
10
13
15
17
19
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
1
4
8
12
17
21
25
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
32
32
32
32
32
32
32
50
50
50
50
50
50
50
80
80
80
80
80
80
80
125
125
125
125
125
125
125
200
200
200
200
200
200
200
315
315
315
315
315
315
315
500
500
500
500
500
500
500
Sample
MULTIPLE
NORMAL
PLANS
Sample size
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 18
SINGLE-USER LICENSE
ONLY,
COPYING
18
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
Sample size
code letter
19
A
B
C
2
4
6
8
10
12
14
3
6
9
12
15
18
21
5
10
15
20
25
30
35
8
16
24
32
40
48
56
13
26
39
52
65
78
91
20
40
60
80
100
120
140
Sample size
2
2
2
2
2
2
2
3
3
3
3
3
3
3
5
5
5
5
5
5
5
8
8
8
8
8
8
8
13
13
13
13
13
13
13
20
20
20
20
20
20
20
Sample
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
0.15
0.25
0.40
0.65
1.0
1.5
2.5
4.0
6.5
10
15
25
40
65
100
150
250
400
650
1000
#
#
0
0
1
1
2
2
2
2
3
3
3
3
#
#
0
0
1
1
2
#
0
0
1
2
3
4
2
2
2
3
3
3
3
2
3
3
4
4
5
5
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
# 2
# 2
0 2
0 3
1 3
1 3
2 3
# 2
0 3
0 3
1 4
2 4
3 5
4 5
# 3
0 3
1 4
2 5
3 6
4 6
6 7
# 4
1 5
2 6
3 7
5 8
7 9
9 10
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
2
4
6
9
12
14
++ = Use corresponding double sampling plan or multiple sampling plan for code letter D below.
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
7
9
11
12
14
15
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
2
4
6
9
12
14
0
3
7
10
14
18
21
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
7
9
11
12
14
15
6
9
12
15
17
20
22
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
7
9
11
12
14
15
6
9
12
15
17
20
22
8
12
17
22
25
29
33
++
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
2
4
6
9
12
14
0
3
7
10
14
18
21
1
6
11
16
22
27
32
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
2
4
6
9
12
14
0
3
7
10
14
18
21
1
6
11
16
22
27
32
#
1
2
3
5
7
9
0
2
4
6
9
12
14
0
3
7
10
14
18
21
1
6
11
16
22
27
32
4
5
6
7
8
9
10
4
7
9
11
12
14
15
6
9
12
15
17
20
22
8
12
17
22
25
29
33
++
++
0
2
4
6
9
12
14
0
3
7
10
14
18
21
1
6
11
16
22
27
32
4
7
9
11
12
14
15
6
9
12
15
17
20
22
8
12
17
22
25
29
33
++
++
0
3
7
10
14
18
21
1
6
11
16
22
27
32
6
9
12
15
17
20
22
8
12
17
22
25
29
33
++
++
1
6
11
16
22
27
32
3
10
17
24
32
40
48
8
12
17
22
25
29
33
10
17
24
31
37
43
49
++
++
3
10
17
24
32
40
48
6
16
26
37
49
61
72
10
17
24
31
37
43
49
15
25
36
46
55
64
73
++
++
6
16
26
37
49
61
72
15
25
36
46
55
64
73
++
++
##
##
##
Re = Rejection number.
Ac = Acceptance number.
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
7
9
11
12
14
15
6
9
12
15
17
20
22
8
12
17
22
25
29
33
++
++
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
= Use first sampling plan below arrow (refer to continuation of table on following page,
when necessary). If sample size equals or exceeds lot or batch size, do 100 percent inspection.
Cumulative
sample size
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 19
SINGLE-USER LICENSE
ONLY,
COPYING
MULTIPLE
TIGHTENED
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
Sample size
code letter
500
1000
1500
2000
2500
3000
3500
800
1600
2400
3200
4000
4800
5600
32
32
32
32
32
32
32
50
50
50
50
50
50
50
80
80
80
80
80
80
80
125
125
125
125
125
125
125
200
200
200
200
200
200
200
315
315
315
315
315
315
315
500
500
500
500
500
500
500
800
800
800
800
800
800
800
Sample
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
0.15
0.25
0.40
0.65
1.0
1.5
2.5
4.0
6.5
10
15
(Continued)
25
40
65
100
150
250
400
650
1000
#
#
0
0
1
1
2
2
2
2
3
3
3
3
#
#
0
0
1
1
2
2
2
2
3
3
3
3
#
#
0
0
1
1
2
#
0
0
1
2
3
4
2
2
2
3
3
3
3
2
3
3
4
4
5
5
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
2
2
2
3
3
3
3
2
3
3
4
4
5
5
2
3
4
5
6
6
7
# 2
# 2
0 2
0 3
1 3
1 3
2 3
# 2
0 3
0 3
1 4
2 4
3 5
4 5
# 2
0 3
1 4
2 5
3 6
4 6
6 7
# 4
1 5
2 6
3 7
5 8
7 9
9 10
2
2
2
3
3
3
3
2
3
3
4
4
5
5
2
3
4
5
6
6
7
4
5
6
7
8
9
10
4
7
9
11
12
14
15
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
7
9
11
12
14
15
6
9
12
15
17
20
22
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
7
9
11
12
14
15
6
9
12
15
17
20
22
8
12
17
22
25
29
33
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
2
4
6
9
12
14
0
3
7
10
14
18
21
1
6
11
16
22
27
32
= Use first sampling plan above arrow (refer to preceding page, when necessary).
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
2
4
6
9
12
14
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
2
4
6
9
12
14
0
3
7
10
14
18
21
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
2
4
6
9
12
14
0
3
7
10
14
18
21
1
6
11
16
22
27
32
2
3
3
4
4
5
5
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
7
9
11
12
14
15
6
9
12
15
17
20
22
8
12
17
22
25
29
33
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
2
4
6
9
12
14
0
3
7
10
14
18
21
1
6
11
16
22
27
32
3
3
4
5
6
6
7
4
5
6
7
8
9
10
4
7
9
11
12
14
15
6
9
12
15
17
20
22
8
12
17
22
25
29
33
4
5
6
7
8
9
10
4
7
9
11
12
14
15
6
9
12
15
17
20
22
8
12
17
22
25
29
33
0
2
4
6
9
12
14
0
3
7
10
14
18
21
1
6
11
16
22
27
32
4
7
9
11
12
14
15
6
9
12
15
17
20
22
8
12
17
22
25
29
33
0
3
7
10
14
18
21
1
6
11
16
22
27
32
6
9
12
15
17
20
22
8
12
17
22
25
29
33
1
6
11
16
22
27
32
8
12
17
22
25
29
33
Re = Rejection number.
Ac = Acceptance number.
#
1
2
3
5
7
9
0
2
4
6
9
12
14
0
3
7
10
14
18
21
1
6
11
16
22
27
32
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
32
64
96
128
160
192
224
50
100
150
200
250
300
350
80
160
240
320
400
480
560
125
250
375
500
625
750
875
200
400
600
800
1000
1200
1400
315
630
945
1260
1575
1890
2205
Sample size
MULTIPLE
TIGHTENED
PLANS
Cumulative
sample size
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 20
SINGLE-USER LICENSE
ONLY,
COPYING
20
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
Sample size
code letter
21
A
B
C
D
E
Sample
Sample size
3
3
3
3
3
3
3
5
5
5
5
5
5
5
8
8
8
8
8
8
8
13
13
13
13
13
13
13
3
6
9
12
15
18
21
5
10
15
20
25
30
35
8
16
24
32
40
48
56
13
26
39
52
65
78
91
Cumulative
sample size
0.25
0.40
0.65
1.0
1.5
2.5
#
#
0
0
0
0
1
2
2
2
3
3
3
3
#
#
0
0
0
0
1
#
#
0
0
0
1
1
2
2
2
3
3
3
3
2
3
3
4
4
5
5
#
#
0
0
0
0
1
#
#
0
0
0
1
1
#
#
0
0
1
1
2
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
#
#
0
0
0
0
1
#
#
0
0
0
1
1
#
#
0
0
1
1
2
#
0
0
1
2
3
4
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
3
4
5
6
7
7
8
# 2
# 2
0 2
0 3
0 3
0 3
1 3
# 2
# 3
0 3
0 4
0 4
1 5
1 5
# 3
# 3
0 4
0 5
1 6
1 6
2 7
# 3
0 4
0 5
1 6
2 7
3 7
4 8
# 4
0 5
1 6
2 7
3 8
4 9
6 10
= Use first sampling plan below arrow (refer to continuation of table on following page,
when necessary). If sample size equals or exceeds lot or batch size, do 100 percent inspection.
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
0.15
4.0
6.5
10
15
25
40
65
100
150
250
400
650
1000
MULTIPLE
REDUCED
PLANS
++ = Use corresponding double sampling plan or multiple sampling plan for code letter F below.
++
++
=
=
=
=
=
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
3
4
5
6
7
7
8
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
7
9
12
13
15
17
6
9
12
15
17
20
22
++
++
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
7
9
12
13
15
17
6
9
12
15
17
20
22
++
++
0
3
6
8
11
14
18
#
1
2
3
5
7
9
0
1
3
5
7
10
13
6
9
12
15
17
20
22
4
6
8
10
11
12
14
5
7
9
12
13
15
17
++
++
0
1
3
5
7
10
13
0
3
6
8
11
14
18
++
++
5 0 6
7 3 9
9 6 12
12 8 15
13 11 17
15 14 20
17 18 22
6
9
12
15
17
20
22
++
++
##
##
##
##
##
##
##
Acceptance number.
Rejection number.
Acceptance not permitted at this sample size.
Use corresponding double sampling plan.
If, after the final sample, the acceptance number has been exceeded,
but the rejection number has not been reached, accept the lot but
reinstate normal inspection (see 10.1.4).
2 # 3
3 # 3
3 0 4
4 0 5
4 1 6
5 1 6
5 2 7
3 # 3
3 0 4
4 0 5
5 1 6
6 2 7
6 3 7
7 4 8
3 # 4
4 0 5
5 1 6
6 2 7
7 3 8
7 4 9
8 6 10
4 # 4
5 1 6
6 2 8
7 3 10
8 5 11
9 7 12
10 9 14
4 0 5
6 1 7
8 3 9
10 5 12
11 7 13
12 10 15
14 13 17
Ac
Re
#
##
#
#
0
0
0
1
1
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
++
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 21
SINGLE-USER LICENSE
ONLY,
COPYING
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
Sample size
code letter
32
32
32
32
32
32
32
50
50
50
50
50
50
50
80
80
80
80
80
80
80
125
125
125
125
125
125
125
200
200
200
200
200
200
200
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
First
Second
Third
Fourth
Fifth
Sixth
Seventh
50
100
150
200
250
300
350
80
160
240
320
400
480
560
125
250
375
500
625
750
875
200
400
600
800
1000
1200
1400
32
64
96
128
160
192
224
20
40
60
80
100
120
140
Cumulative
sample size
0.15
0.25
0.40
0.65
1.0
1.5
2.5
4.0
6.5
10
15
(Continued)
25
40
65
100
150
250
400
650
1000
#
#
0
0
0
0
1
2
2
2
3
3
3
3
#
#
0
0
0
0
1
#
#
0
0
0
1
1
2
2
2
3
3
3
3
2
3
3
4
4
5
5
#
#
0
0
0
0
1
#
#
0
0
0
1
1
#
#
0
0
1
1
2
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
#
#
0
0
0
0
1
#
#
0
0
0
1
1
#
#
0
0
1
1
2
#
0
0
1
2
3
4
2
2
2
3
3
3
3
2
3
3
4
4
5
5
3
3
4
5
6
6
7
3
4
5
6
7
7
8
# 2
# 2
0 2
0 3
0 3
0 3
1 3
# 2
# 3
0 3
0 4
0 4
1 5
1 5
# 3
# 3
0 4
0 5
1 6
1 6
2 7
# 3
0 4
0 5
1 6
2 7
3 7
4 8
# 4
0 5
1 6
2 7
3 8
4 9
6 10
#
#
0
0
0
1
1
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
#
#
0
0
0
0
1
#
#
0
0
1
1
2
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
#
#
0
0
0
1
1
3
3
4
5
6
6
7
3
4
5
6
7
7
8
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
7
9
12
13
15
17
2
3
3
4
4
5
5
#
0
0
1
2
3
4
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
#
#
0
0
1
1
2
3
4
5
6
7
7
8
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
7
9
12
13
15
17
6
9
12
15
17
20
22
3
3
4
5
6
6
7
#
0
1
2
3
4
6
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
#
0
0
1
2
3
4
4
5
6
7
8
9
10
4
6
8
10
11
12
14
5
7
9
12
13
15
17
6
9
12
15
17
20
22
3
4
5
6
7
7
8
#
1
2
3
5
7
9
0
1
3
5
7
10
13
0
3
6
8
11
14
18
4
6
8
10
11
12
14
5
7
9
12
13
15
17
6
9
12
15
17
20
22
# 4
0 5
1 6
2 7
3 8
4 9
6 10
0
1
3
5
7
10
13
0
3
6
8
11
14
18
#
1
2
3
5
7
9
Re = Rejection number.
Ac = Acceptance number.
5 0 6
7 3 9
9 6 12
12 8 15
13 11 17
15 14 20
17 18 22
6
9
12
15
17
20
22
4 0 5 0 6
6 1 7 3 9
8 3 9 6 12
10 5 12 8 15
11 7 13 11 17
12 10 15 14 20
14 13 17 18 22
= If, after the final sample, the acceptance number has been exceeded, but the rejection number has not been reached, accept the lot, but reinstate normal inspection (see 10.1.4).
2
3
3
4
4
5
5
3
3
4
5
6
6
7
3
4
5
6
7
7
8
4
5
6
7
8
9
10
4
6
8
10
11
12
14
2
2
2
3
3
3
3
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
20
20
20
20
20
20
20
Sample
MULTIPLE
REDUCED
PLANS
Sample size
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 22
SINGLE-USER LICENSE
ONLY,
COPYING
22
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
23
500
800
1250
2000
125
80
315
50
200
32
20
13
Sample
size
Code
Letter
0.067 0.11
0.11
0.16
0.17
0.17
0.074
0.18
1.8
1.2
1.2
0.82
0.75
0.73
0.40 0.56
0.36 0.52
0.33 0.47
0.24
0.25
0.22
Sample size
Lot or Batch size
2.9
1.9
1.3
0.90
0.39 0.63
0.27
4.7
3.0
2.1
1.4
(See 11.4)
7.3
4.7
3.3
2.2
1.6
1.00
12
7.5
5.2
3.6
2.5
1.6
1.1
0.67
0.97
18
12
8.2
5.6
4.0
2.4
1.7
1.1
0.44 0.62
29
19
13
9.0
6.3
46
29
21
14
9.9
6.1
3.9
73
47
33
22
16
9.7
6.9
4.2
4.3
250
170
110
72
50
34
24
410
270
180
120
82
56
40
24
15
660
430
290
190
130
90
63
39
17
720 1100
490
310
220
150
110
63
46
730 1100
470
330
220
160
97
69
42
27
650 1000
400
250
150
100
65
40
25
28
15
(See 11.4)
17
10
11
18
6.5
11
12
4.0
6.5
7.4
2.5
2.7
4.6
1.5
2.6
2.8
1.0
1.7
1.2
1.8
0.65
0.42 0.69
0.74
0.25 0.40
0.27
0.46
0.15
Note: For a more accurate AOQL, the above values must be multiplied by
0.029
0.046
0.12
0.29
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 23
SINGLE-USER LICENSE
ONLY,
COPYING
AOQL
NORMAL
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
AOQL
TIGHTENED
PLANS
315
500
800
1250
2000
3150
125
200
80
50
32
20
13
Sample
size
Code
Letter
0.027
0.067 0.11
0.11
0.16
0.17
0.17
0.074
0.18
0.29
0.15
6.2
4.0
3.9
2.6
2.5
2.5
1.6
1.6
1.6
1.6
0.97
1.0
1.0
0.99
0.99
0.69
0.62
0.63
0.64
0.64
0.62
0.42
0.27 0.44
0.27 0.39
0.24 0.40
0.25 0.41
0.26 0.40
(See 11.4)
9.9
6.4
4.1
2.5
1.6
1.1
0.67
Sample size
Lot or Batch size
16
9.9
6.4
4.0
2.4
1.7
1.1
25
16
0.46
25
16
9.9
10
39
62
40
26
16
9.7
6.9
6.3
240
150
95
61
40
24
15
380
240
160
99
64
40
24
17
610
390
250
160
100
63
39
11
650 1100
410
270
170
110
65
46
970
620
400
260
160
97
69
42
27
650 1000
400
250
150
100
65
40
28
25
(See 11.4)
17
15
11
10
6.5
12
6.5
6.1
4.2
7.4
4.0
3.9
4.6
2.5
4.3
2.8
1.5
2.7
1.8
1.0
2.6
1.2
0.65
1.7
0.74
0.25 0.40
Note: For a more accurate AOQL, the above values must be multiplied by
0.018
0.029
0.046
0.12
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 24
SINGLE-USER LICENSE
ONLY,
COPYING
24
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
32
50
80
125
200
315
500
G
H
J
K
L
M
N
2000
20
13
800
1250
Sample
size
Code
Letter
0.18
0.29
0.20
0.46
0.27
0.31
0.73
0.33
0.43
0.49
1.2
0.46
0.53
0.67
0.78
1.8
14
10
9.0
7.7
6.4
5.6
5.9
4.9
4.0
3.5
4.6
3.7
3.1
2.5
2.3
2.9
2.4
1.9
1.6
1.4
2.1
1.9
1.5
1.2
1.0
1.7
1.3
1.2
0.94
0.77
1.2
1.1
0.84
0.74
0.59
23
16
12
9.4
7.4
5.4
24
19
14
11
8.2
6.5
4.8
3.3
29
22
18
13
4.3
34
27
20
16
42
30
10
44
36
25
54
58
10
41
68
6.5
27
54
4.0
18
37
2.5
12
25
1.5
7.6
16
1.0
2.7
6.9
11
0.65
3.1
4.5
0.25 0.40
2.0
2.8
0.15
(See 11.6)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 25
SINGLE-USER LICENSE
ONLY,
COPYING
LQ (Nonconforming Units)
10% PLANS
25
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
LQ (Nonconformities)
10% PLANS
32
50
80
125
200
315
500
2000
20
13
800
1250
Sample
size
Code
Letter
0.18
0.29
0.20
0.46
0.27
0.31
0.73
0.33
0.43
0.49
1.2
0.46
0.53
0.67
0.78
1.8
770
670
560
480
410
590
510
400
350
300
460
390
310
250
220
330
310
240
190
190
150
130
120
110
84
78
67
49
14
10
9.0
7.7
6.4
5.6
5.9
4.9
4.0
3.5
4.6
3.7
3.1
2.5
2.3
2.9
2.4
1.9
1.6
1.4
2.1
1.9
1.5
1.2
1.0
1.7
1.3
1.2
0.94
0.77
1.2
1.1
0.84
0.74
0.59
23
16
12
9.4
7.4
5.4
3.3
35
25
19
15
12
8.4
6.7
4.9
4.3
56
40
31
24
19
13
88
63
48
37
29
21
17
140
100
77
59
46
33
11
160
120
91
71
51
41
27
120
220
650 1000
270
400
250
150
100
65
40
25
180
15
200
10
(See 11.6)
130
6.5
30
77
4.0
20
46
2.5
12
29
1.5
7.8
18
1.0
2.7
7.2
12
0.65
3.1
4.6
0.25 0.40
2.0
2.9
0.15
Table VI-BLimiting Quality (in nonconformities per hundred units) for Which Pa = 10 Percent
(for Normal Inspection, Single Sampling)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 26
SINGLE-USER LICENSE
ONLY,
COPYING
26
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
32
50
80
125
200
315
500
G
H
J
K
L
M
N
2000
20
13
800
1250
Sample
size
Code
Letter
0.24
0.38
0.24
0.60
0.32
0.38
0.95
0.39
0.50
0.59
1.5
0.53
0.62
0.79
0.95
2.4
15
11
9.6
8.5
7.0
6.1
6.6
5.4
4.4
3.8
5.3
4.2
3.4
2.7
2.4
3.3
2.6
2.1
1.8
1.5
2.5
2.1
1.6
1.4
1.1
2.0
1.6
1.3
1.1
0.85
1.5
1.3
0.97
0.84
0.66
24
18
14
11
8.4
6.2
26
20
16
13
9.4
7.7
5.8
3.9
32
25
20
15
5.0
37
30
23
18
46
34
12
50
41
28
60
66
10
47
78
6.5
32
63
4.0
22
45
2.5
14
31
1.5
9.1
21
1.0
3.2
8.9
14
0.65
3.8
5.8
0.25 0.40
2.4
3.7
0.15
(See 11.6)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 27
SINGLE-USER LICENSE
ONLY,
COPYING
LQ (Nonconforming Units)
5% PLANS
27
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
LQ (Nonconformities)
5% PLANS
32
50
80
125
200
315
500
2000
20
13
800
1250
Sample
size
Code
Letter
0.24
0.38
0.24
0.60
0.32
0.38
0.95
0.39
0.50
0.59
1.5
0.53
0.62
0.79
0.95
2.4
850
730
610
510
440
660
570
440
380
310
530
440
340
270
230
390
350
260
210
210
160
160
130
130
97
95
79
59
15
11
9.6
8.5
7.0
6.1
6.6
5.4
4.4
3.8
5.3
4.2
3.4
2.7
2.4
3.3
2.6
2.1
1.8
1.5
2.5
2.1
1.6
1.4
1.1
2.0
1.6
1.3
1.1
0.85
1.5
1.3
0.97
0.84
0.66
24
18
14
11
8.4
6.2
5.0
38
27
21
16
13
9.7
7.9
5.9
3.9
61
44
34
26
21
16
95
68
53
41
33
24
20
150
110
85
66
53
39
13
170
130
100
81
60
48
32
150
260
650 1000
320
400
250
150
100
65
40
25
210
15
240
10
(See 11.6)
160
6.5
37
100
4.0
24
60
2.5
15
38
1.5
9.5
23
1.0
3.2
9.4
15
0.65
3.8
6.0
0.25 0.40
2.4
3.8
0.15
Table VII-BLimiting Quality (in nonconformities per hundred units) for Which Pa = 5 Percent
(for Normal Inspection, Single Sampling)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 28
SINGLE-USER LICENSE
ONLY,
COPYING
28
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
*
*
*
*
*
0
*
*
*
*
*
*
0
0
2000031499
7
14
24
40
67
7
13
22
38
14
24
8
14
4
8
2
4
111
68
40
24
14
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
0.25 0.40
*
*
*
*
*
*
*
*
*
0.15
186
115
69
42
25
14
*
*
*
*
*
181
110
68
40
24
14
169
105
63
38
22
181
110
67
40
24
181
111
68
40
186
115
69
181
110
169
105
68
42
24
14
4
13
181
63
40
25
113
181
68
110
39
24
14
8
14
189
471
277
181
115
68
40
22
14
490
301
177
72
42
25
297
181
105
68
115
42
24
14
7
13
110
63
40
25
14
277
301
181
63
36
22
181
115
178
68
105
40
22
14
8
650 1000
13
400
250
150
100
65
40
25
15
10
6.5
*
*
4.0
*
*
*
2.5
*
*
*
1.5
*
*
*
1.0
*
*
*
0.65
(See 4.7.3)
LIMIT
NUMBERS
* = Denotes that the number of sample units from the last ten lots or batches is not sufficient for reduced inspection for this AQL. Is this instance, more than ten lots or batches
may be used for the calculation, provided that the lots or batches used are the most recent ones in sequence, that they have all been on normal inspection, and that none has
been rejected while on original inspection.
1250019999
800012499
50007999
31504999
20003149
12501999
8001249
*
*
*
*
*
*
*
*
*
500799
320499
200319
*
*
*
*
*
*
*
*
*
*
*
*
130199
80129
5079
3049
2029
*
*
*
*
*
*
Number of
sample units
from last 10
lots or batches
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 29
SINGLE-USER LICENSE
ONLY,
COPYING
29
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
AVERAGE
SAMPLE SIZE
PLANS
5
10
15
le
tip
l
30
18
i pl
c = 10
ul t
uble
Do
Doub
le
12
c=2
c = 27
27
16
36
M
ul
ti
e
c=3
pl
12
15
18
10
20
tip
le
30
40
n proportion nonconforming
ul
le
c = 30
Dou
b
n proportion nonconforming
le
c = 12
Mu
lti
p
Doub
le
n proportion nonconforming
le
tip
25
c = 21
14
l tipl
ul
20
ul
13
10
27
15
Dou
b
le
12
pl
18
39
52
c = 41
36
Double
Double
20
45
c = 44
54
25
c = 18
le
c = 14
0
ti p
c=7
M
ul
Dou
ble
pl
e
Mu
l ti
Dou
ble
10
12 15 18 21
26
c=5
le
c=8
ti p
ble
Do
ub
M
ul
Do
u
Mu
Dou
ble
M
ul t
i pl
e
ul t
c=1
ipl
Do
ub
le
l ti p
1/4 n
u lt
Do
ubl
e
Mu
1/2 n
3/4 n
Doub
le
(See 11.5)
le
tip
ul
1/4 n
1/2 n
3/4 n
1/4 n
1/2 n
3/4 n
Table IXAverage sample size curves for double and multiple sampling plans
(normal and tightened inspection)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 30
SINGLE-USER LICENSE
ONLY,
COPYING
30
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
31
1.0
5.0
10.0
25.0
50.0
75.0
90.0
95.0
99.0
Pa
10
20
30
40
50
60
70
80
90
100
25
200
40
300
65
400
100
500
150
600
700
250
800
900
400
1000
1100
1200
1300
650
1400
1500
1600
INDIVIDUAL PLANS
1700
1800
1000
1900
6.5
526
655
388
502
315
420
237
332
150
230
77.6
90.0
250
800
657
589
484
383
298
233
199
145
250
870
722
650
540
433
342
272
235
175
1007
848
770
651
533
431
351
308
239
2270
2088
1718
1529
1272
1000
2035
1862
1512
1335
1094
1916
1748
1409
1238
1006
650
1728
1568
1248
1533
1383
1083
933
1214
934
795
612
1087
1354
1073
812
684
515
870
1206
995
745
733
977
1122
859
629
622
X
517
625
462
X
374
400
Note: Binomial distribution used for percent nonconforming computations; Poisson for nonconformities per hundred units.
400
1141
972
889
761
633
521
432
384
305
150
150
464
334
266
194
115
68.4
100
371
255
196
69.3
50.0
65
284
184
134
83.9
135
34.7
29.3
40
211
86.4
48.1
158
87.2
127
55.1
26.6
5.27
14.4
5.13
68.3
40.9
13.4
89.3
131
41.2
21.8
100
17.8
65
0.503
40
2.56
7.43
25
0.501
6.5
2.53
p (in percent
nonconforming)
TABLE X-A-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
1000
2000
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
100
6.5
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 31
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
A
2
X
10
15
25
40
65
100
150
X
250
X
400
10
Use
Code
Letter
D
15
Use
Code
Letter
C
25
Use
Code
Letter
B
65
(*)
100
(*)
150
(*)
(*)
250
(*)
650
1000
(*)
400
(*)
(*)
Use single sampling plan (or alternatively use code letter B).
Use single sampling plan above (or alternatively use code letter D).
Re = Rejection number.
Ac = Acceptance number.
650
(*)
(*)
1000
(*)
(*)
10 11 12 13 14 15 18 19 21 22 27 28 30 31
40
(*)
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
Less than
10
* =
(*) =
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
6.5
Ac Re
Cumulative
sample
size
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 32
SINGLE-USER LICENSE
ONLY,
COPYING
32
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
33
200
40
65
300
100
400
150
500
600
250
700
800
400
900
1000
1100
1200
650
1300
1400
1500
1600
INDIVIDUAL PLANS
1700
1000
1800
1900
2000
4.0
20.6
37.0
53.6
63.2
78.5
75.0
50.0
25.0
10.0
5.0
1.0
6.5
3.45
9.14
90.0
0.33
1.70
95.0
150
141
189
247
309
350
437
100
122
170
223
258
335
65
57.6
89.1
131
177
210
280
40
32.0
55.9
89.8
130
158
221
23.1
46.2
76.8
99.9
154
481
433
360
289
228
181
671
565
514
434
356
287
234
250
761
648
593
507
422
347
288
256
203
1886
2069
1773
1951
1356
1513
1165
1241
1392
939
1008
1145
825
890
1019
671
730
848
1793
1683
1277
1000
1644
1539
1152
832
724
580
1489
1389
1022
922
1045
722
622
489
650
1344
1249
903
809
623
530
408
1222
1131
804
716
541
456
343
400
1152
748
663
1029
947
1065
651
572
1000
495
X
419
650
415
X
345
400
308
X
249
438
392
323
256
199
155
206
159
250
Note: Binomial distribution used for percent nonconforming computations; Poisson for nonconformities per hundred units.
25
580
533
105
58.2
84.5
36.7
17.7
9.59
157
117
3.51
96.9
133
59.5
87.1
45.5
6.5
150
100
27.4
65
27.3
40
14.5
25
11.8
4.95
15
1.71
0.335
4.0
TABLE X-B-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
100
15 25
p (in percent
nonconforming)
4.0
99.0
Pa
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 33
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
6.5
X
10
15
25
40
65
100
X
150
X
250
X
400
650
1000
6.5
0
1
Use
Code
Letter
A
10
Use
Code
Letter
D
15
Use
Code
Letter
C
3 4
0 3
2 3
4 5
1 4
3 4
6 7
2 5
5 6
8 9
3 7
7 8
5 9
6 10
7 11
25
65
100
150
250
40
Use double sampling plan above (or alternatively use code letter D).
Use single sampling plan above (or alternatively use code letter E).
Re = Rejection number.
Ac = Acceptance number.
9 14
11 16 15 20 17 22 23 29 25 31
10 11 12 13 14 15 18 19 21 22 27 28 30 31 41 42 44 45
11 12 12 13 15 16 18 19 23 24 26 27 34 35 37 38 52 53 56 57
3 7
8 9
400
650
1000
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
1 2
0 2
1 2
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
4.0
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
Less than
6.5
* =
+ +=
Ac Re
Cumulative
sample
size
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 34
SINGLE-USER LICENSE
ONLY,
COPYING
34
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
35
10
100
40
200
65
300
100
150
400
500
250
600
700
400
800
900
1000
650
1100
1200
185
210
262
134
155
201
106
126
168
77.8
94.9
133
46.1
59.9
92.1
4.0
58.4
65.7
77.8
36.9
45.1
60.2
4.0
10.0
5.0
1.0
100
320
263
235
194
153
119
93.1
79.6
58.1
100
348
289
260
216
173
137
109
93.9
70.1
403
339
308
260
213
172
140
123
95.4
150
456
389
356
304
253
208
173
154
122
65
1131
1241
1064
1171
814
908
745
835
564
605
687
495
534
612
403
438
509
Note: Binomial distribution used for percent nonconforming computations; Poisson for nonconformities per hundred units.
1076
1010
766
699
650
986
923
691
627
499
435
348
893
833
613
553
433
373
293
400
806
749
542
485
374
318
245
733
679
482
429
325
273
206
250
691
639
449
398
618
568
391
343
650
298
X
251
400
249
X
207
250
185
X
150
150
65
148
53.9
27.7
45.4
24.2
25.0
40
113
73.4
102
53.5
78.4
33.6
13.9
31.4
12.9
50.0
25
84.4
34.5
19.2
5.75
15
63.0
34.9
50.7
22.0
10.6
2.11
11.2
19.4
2.09
5.59
75.0
27.3
7.11
90.0
37.5
52.3
16.5
8.72
16.4
2.97
0.201
1.03
40
3.27
25
7.64
15
0.201
10
1.02
2.5
TABLE X-C-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
95.0
p (in percent
nonconforming)
2.5
2.5 10 15 25
99.0
Pa
10
20
30
40
50
60
70
80
90
100
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
INDIVIDUAL PLANS
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 35
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
4.0
X
6.5
10
15
25
40
65
X
100
X
150
X
250
X
400
650
1000
4.0
0
1
Use
Code
Letter
B
6.5
Use
Code
Letter
E
10
Use
Code
Letter
D
3 4
0 3
2 3
4 5
1 4
3 4
6 7
2 5
5 6
8 9
3 7
7 8
5 9
6 10
7 11
15
25
65
100
150
40
Use double sampling plan above (or alternatively use code letter D).
Use single sampling plan above (or alternatively use code letter F).
Re = Rejection number.
Ac = Acceptance number.
9 14
250
400
650
1000
Use
Code
Letter
11 16 15 20 17 22 23 29 25 31
B
10 11 12 13 14 15 18 19 21 22 27 28 30 31 41 42 44 45
11 12 12 13 15 16 18 19 23 24 26 27 34 35 37 38 52 53 56 57
3 7
8 9
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
1 2
0 2
1 2
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
2.5
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
Less than
4.0
* =
+ +=
Ac Re
Cumulative
sample
size
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 36
SINGLE-USER LICENSE
ONLY,
COPYING
36
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
37
59.0
10
31.2
43.8
2.5
5.0
1.0
47.1
40.6
25.0
30.3
20.1
10.0
8.30
6.88
12.1
15.9
50.0
1.97
4.64
25.0
1.32
3.53
75.0
0.639
95.0
90.0
0.126
99.0
50
15
100
25
40
150
65
200
100
250
300
150
350
400
450
250
500
550
INDIVIDUAL PLANS
600
400
650
700
60.0
2.5
78.7
59.3
37.4
53.8
131
96.9
66.5
48.6
28.8
43.3
15
25
65
100
65
218
180
162
135
108
85.5
67.9
58.7
43.8
252
212
193
163
133
108
87.8
77.1
59.6
100
285
243
222
190
158
130
108
96.1
76.2
672
707
776
631
665
732
479
509
568
437
465
522
352
378
429
309
334
382
252
274
318
617
577
432
392
312
272
217
400
558
521
383
346
271
233
183
504
468
339
303
234
199
153
250
458
424
301
268
203
171
129
432
399
281
150
386
355
244
93.5
249
450
215
X
186
250
157
X
156
150
129
X
116
40
200
164
147
121
95.9
74.5
58.2
49.8
36.3
40
Note: Binomial distribution used for percent nonconforming computations; Poisson for nonconformities per hundred units.
10
164
116
83.5
49.0
33.7
17.3
32.1
126
92.8
63.9
33.4
21.0
8.66
105
70.9
45.9
21.6
3.60
83.0
52.7
21.8
31.7
13.8
6.65
12.0
1.31
14.7
22.1
57.6
39.4
17.1
70.7
22.3
32.7
10.3
5.45
10.2
1.86
25
4.44
15
0.126
10
0.641
6.5
6.08
1.5
11.1
10
TABLE X-D-1TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
6.5
1.5 6.5 10
p (in percent
nonconforming)
1.5
Pa
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 37
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
D
X
4.0
6.5
10
1 3
2 3
12
14
15
25
40
X
65
X
100
15
4 5
40
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
= Use single sampling plan above (or alternatively use code letter G).
Re = Rejection number.
Ac = Acceptance number.
*
#
X
150
X
250
400
5 9
6 10
7 11
9 14
11 16 15 20 17 22 23 29 25 31
10 11 12 13 14 15 18 19 21 22 27 28 30 31 41 42 44 45
9 12
6 11
4 9
2 7
0 4
8 13
4 10
7 14
2 9
4 12
6 15
6 16
10 17 11 19 16 25 17 26
3 10
11 17 13 19 17 24 19 27 26 36 29 39
6 12
10 15 12 17 16 22 19 25 24 31 27 34 37 46 40 49
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29 32 37 36 40 49 55 53 58
8 13
6 10
3 8
0 5
11 12 12 13 15 16 18 19 23 24 26 27 34 35 37 38 52 53 56 57
3 7
8 9
65
100
150
250
400
13 14 14 15 18 19 21 22 25 26 32 33 37 38 48 49 53 54 72 73 77 78
10 12 12 14 14 17 18 20 21 23 27 29 31 33 40 43 45 47 61 64 65 68
7 11
5 10
0 4
8 9
3 7
7 8
25
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
10
2 4
1 3
10
3 5
1 4
0 3
2.5
Less than
2.5
0 3
0 2
0 3
2 3
0 2
1 2
0 3
6.5
Use
Code
Letter
E
# 2
4.0
Use
Code
Letter
F
Use
Code
Letter
C
# 2
# 2
3 4
2.5
Higher
than
400
14
12
10
10
size
Cumu-
Higher lative
than
sample
400
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
1.5
1 2
10
Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 38
SINGLE-USER LICENSE
ONLY,
COPYING
38
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
39
25
50
75
25
100
40
125
65
150
175
200
100
225
250
275
150
300
325
350
375
250
INDIVIDUAL PLANS
400
425
450
475
3.58
6.60
1.18
2.81
0.077
0.394
99.0
95.0
6.5
20.0
28.0
36.0
41.0
50.6
10
12.6
19.4
26.8
31.6
41.3
6.5
16.2
20.6
29.8
1.5
10.0
5.0
1.0
5.19
50.0
10.1
75.0
25.0
8.80
13.4
4.17
7.41
0.807
2.19
90.0
p (in percent
nonconforming)
4.0
101
77.3
64.7
51.1
35.4
1.5
58.8
40
65
123
101
90.5
74.5
59.0
45.8
35.8
30.6
22.4
40
134
111
100
83.1
66.7
52.6
41.8
36.1
27.0
155
130
119
100
82.1
66.3
54.0
47.5
36.7
65
176
150
137
117
97.4
80.2
66.5
59.2
46.9
435
477
409
450
313
349
286
321
233
264
190
205
235
155
168
196
Note: Binomial distribution used for percent nonconforming computations; Poisson for nonconformities per hundred units.
414
388
295
269
217
250
379
355
266
241
192
167
134
344
321
236
213
167
144
113
150
310
288
208
187
144
122
94.1
282
261
185
165
125
105
79.2
100
266
246
173
153
238
219
150
132
150
96.7
X
115
150
95.7
X
79.6
100
71.1
X
57.5
25
25
80.9
59.6
48.4
36.5
23.0
49.5
15
71.3
51.4
40.9
29.9
17.7
44.4
10
57.1
39.3
20.7
6.5
43.6
28.2
20.6
30.2
12.9
5.33
10.7
36.1
32.5
27.5
24.2
13.4
19.5
8.48
13.3
4.09
7.39
0.810
2.21
14.2
6.29
19.9
13.7
20.1
6.33
10.5
3.35
1.15
15
2.73
10
0.077
6.5
0.395
4.0
6.95
1.0
11.3
10
TABLE X-E-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
15
1.0
Pa
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 39
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
E
X
2.5
4.0
6.5
1 3
2 3
18
21
10
15
25
X
40
X
65
10
4 5
25
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
= Use single sampling plan above (or alternatively use code letter H).
Re = Rejection number.
Ac = Acceptance number.
*
#
X
100
X
150
250
5 9
6 10
7 11
9 14
11 16 15 20 17 22 23 29 25 31
10 11 12 13 14 15 18 19 21 22 27 28 30 31 41 42 44 45
9 12
6 11
4 9
2 7
0 4
8 13
4 10
9
7 14
4 12
6 15
6 16
10 17 11 19 16 25 17 27
3 10
11 17 13 19 17 24 19 27 26 36 29 39
6 12
10 15 12 17 16 22 19 25 24 31 27 34 37 46 40 49
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29 32 37 36 40 49 55 53 58
8 13
6 10
3 8
0 5
11 12 12 13 15 16 18 19 23 24 26 27 34 35 37 38 52 53 56 57
3 7
8 9
40
65
100
150
250
13 14 14 15 18 19 21 22 25 26 32 33 37 38 48 49 53 54 72 73 77 78
10 12 12 14 14 17 18 20 21 23 27 29 31 33 40 43 45 47 61 64 65 68
7 11
5 10
0 4
8 9
3 7
7 8
15
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
6.5
2 4
1 3
15
3 5
1 4
0 3
1.5
12
Less than
1.5
0 3
0 2
0 3
2 3
0 2
1 2
0 3
4.0
Use
Code
Letter
F
# 2
2.5
Use
Code
Letter
G
Use
Code
Letter
D
# 2
# 2
3 4
1.5
Higher
than
250
21
18
15
12
13
13
size
Cumu-
Higher lative
than
sample
250
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
1.0
1 2
13
13
Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 40
SINGLE-USER LICENSE
ONLY,
COPYING
40
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
41
10
20
4.0
6.5
30
10
40
50
15
60
25
70
80
90
40
100
110
120
65
130
140
150
0.0503
0.256
0.527
1.44
9.75
14.0
16.6
21.6
4.36
7.14
9.03
12.8
4.22
5.64
8.70
2.69
4.81
20.6
1.0
1.0
13.9
25.0
10.9
6.70
50.0
5.0
3.41
75.0
10.0
0.525
1.43
90.0
41.5
45.6
30.4
34.4
42.1
24.5
28.3
35.8
6.5
18.1
21.6
28.9
4.0
33.2
23.0
1.0
53.2
6.5
42.0
31.5
26.6
19.6
13.4
8.65
5.51
4.09
2.18
4.0
10
50.2
38.8
33.4
25.5
18.4
12.7
8.72
6.83
4.12
6.5
15
25
15
65.5
52.6
46.4
37.1
28.4
21.1
15.8
13.1
8.93
151
172
153
109
127
88.9
97.2
114
77.0
84.8
101
65.0
72.2
87.0
58.9
65.7
80.0
141
133
101
65
125
124
87.0
76.1
65.1
54.0
48.4
108
93.3
109
73.3
63.3
53.3
43.3
38.3
40
93.4
79.5
61.2
52.1
43.1
34.2
29.8
81.2
68.4
51.5
43.2
35.1
27.2
23.3
25
74.5
62.2
46.2
38.4
30.8
62.9
51.7
37.4
30.5
23.9
65
23.5
X
17.5
40
19.9
160
14.5
10
4.0
23.7
15.0
19.4
13.5
8.39
4.81
2.66
1.78
0.743
2.5
Note: Binomial distribution used for percent nonconforming computations; Poisson for nonconformities per hundred units.
10
6.93
24.2
18.7
11.5
3.47
27.9
34.8
18.1
13.1
8.25
12.9
0.65
2.27
10
0.759
95.0
6.5
1.80
0.0502
0.256
99.0
4.0
p (in percent
nonconforming)
2.5
TABLE X-F-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
2.5
0.65
0.65
INDIVIDUAL PLANS
Pa
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 41
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
X
1.5
2.5
4.0
1 3
2 3
30
35
6.5
10
15
X
25
6.5
4 5
10
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
15
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
X
40
65
5 9
6 10
7 11
= Use single sampling plan above (or alternatively use code letter H).
Re = Rejection number.
Ac = Acceptance number.
9 14
11 16
10 11 12 13 14 15 18 19 21 22
9 12
6 11
4 9
2 7
0 4
8 13
4 10
9
7 14
11 17 13 19
6 12
10 15 12 17 16 22 19 25
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29
8 13
6 10
3 8
0 5
11 12 12 13 15 16 18 19 23 24 26 27
3 7
8 9
25
40
65
13 14 14 15 18 19 21 22 25 26 32 33 37 38
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
*
#
10 12 12 14 14 17 18 20 21 23 27 29 31 33
7 11
5 10
3 8
1 6
0 4
8 9
3 7
7 8
4.0
2 4
1 3
25
3 5
1 4
0 3
1.0
20
Less than
1.0
0 3
0 2
0 3
2 3
15
0 2
1 2
0 3
2.5
Use
Code
Letter
G
# 2
1.5
Use
Code
Letter
H
10
Use
Code
Letter
E
# 2
# 2
3 4
1.0
Higher
than
65
35
30
25
20
15
10
26
13
20
size
Cumu-
Higher lative
than
sample
65
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
0.65
1 2
26
13
20
Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 42
SINGLE-USER LICENSE
ONLY,
COPYING
42
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
0.40
10
1.5
2.5
4.0
20
6.5
30
10
43
70
4.0
36.0
28.1
6.5
23.8
4.0
19.0
2.5
80
90
100
20.7
14.4
0.65
43.2
4.0
26.3
19.7
16.6
12.3
8.36
5.40
3.44
2.56
1.36
2.5
6.5
31.4
24.2
20.9
16.0
11.5
7.92
5.45
4.26
2.57
4.0
10
15
10
41.0
32.9
29.0
23.2
17.7
13.2
9.85
8.17
5.58
94.5
107
95.6
68.4
79.5
55.6
60.8
71.3
48.1
53.0
63.0
40.6
45.1
54.4
36.8
41.1
50.0
88.1
83.4
62.9
40
78.0
77.4
54.4
47.6
33.8
30.3
67.7
58.3
67.9
45.8
39.6
33.3
40.7
27.1
24.0
25
58.4
49.7
38.2
32.6
26.9
21.4
18.6
50.8
42.7
32.2
27.0
21.9
17.0
14.6
15
46.5
38.9
28.9
24.0
19.3
39.3
32.3
23.4
19.1
14.9
40
14.7
X
11.0
25
9.08
X
12.4
6.5
2.5
14.8
9.36
12.2
8.41
5.24
3.00
1.66
1.11
0.464
1.5
Note: Binomial distribution used for percent nonconforming computations; Poisson for nonconformities per hundred units.
10
37.2
30.1
22.5
18.4
7.20
34.1
27.1
19.7
15.8
14.0
8.94
11.6
6.94
5.0
4.33
10.0
2.17
23.7
29.0
8.19
4.24
25.0
22.3
8.27
5.19
2.14
50.0
17.5
0.899
19.0
13.4
7.98
3.01
0.895
75.0
15.4
0.329
15.1
10.2
5.56
3.49
5.42
1.67
0.329
90.0
11.4
0.160
8.50
4.38
11.9
0.0314
9.73
13.1
5.88
2.67
1.40
0.40
2.60
10
0.471
6.5
1.12
p (in percent
nonconforming)
2.5
0.0314
1.5
0.160
0.65
60
40
TABLE X-G-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
95.0
13.4
50
25
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
99.0
0.40
Pa
1.0
40
15
INDIVIDUAL PLANS
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 43
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
X
1.0
1.5
2.5
1 3
2 3
48
56
4.0
6.5
10
X
15
4.0
4 5
6.5
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
10
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
X
25
40
5 9
6 10
7 11
= Use single sampling plan above (or alternatively use code letter K).
Re = Rejection number.
Ac = Acceptance number.
9 14
11 16
10 11 12 13 14 15 18 19 21 22
9 12
6 11
4 9
2 7
0 4
8 13
4 10
9
7 14
11 17 13 19
6 12
10 15 12 17 16 22 19 25
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29
8 13
6 10
3 8
0 5
11 12 12 13 15 16 18 19 23 24 26 27
3 7
8 9
15
25
40
13 14 14 15 18 19 21 22 25 26 32 33 37 38
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
*
#
10 12 12 14 14 17 18 20 21 23 27 29 31 33
7 11
5 10
3 8
1 6
0 4
8 9
3 7
7 8
2.5
2 4
1 3
40
3 5
1 4
0 3
0.65
32
Less than
0.65
0 3
0 2
0 3
2 3
24
0 2
1 2
0 3
1.5
Use
Code
Letter
H
# 2
1.0
Use
Code
Letter
J
16
Use
Code
Letter
F
# 2
# 2
3 4
0.65
Higher
than
40
56
48
40
32
24
16
40
20
32
size
Cumu-
Higher lative
than
sample
40
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
0.40
1 2
40
20
32
Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 44
SINGLE-USER LICENSE
ONLY,
COPYING
44
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
0.25
1.0
1.5
10
2.5
15
4.0
20
6.5
25
10
30
35
15
40
45
50
25
55
INDIVIDUAL PLANS
60
65
45
12.6
1.5
4.50
5.82
8.80
0.40
10.0
5.0
1.0
9.14
7.56
5.29
3.33
1.38
2.73
25.0
1.92
1.07
0.715
0.300
1.0
50.0
0.211
0.574
0.103
95.0
75.0
0.0201
99.0
90.0
0.25
Pa
2.5
15.8
12.1
10.3
7.69
5.31
3.46
2.22
1.66
0.886
1.5
4.0
10
0.40
1.5
2.5
16.8
12.6
10.6
7.84
5.35
3.45
2.20
1.64
0.872
1.5
4.0
6.5
10
4.0
20.1
15.5
13.4
10.2
7.34
5.07
3.49
2.73
1.65
6.5
26.2
21.0
18.5
14.8
11.3
8.44
6.30
5.23
3.57
56.4
60.5
68.7
49.5
53.4
61.1
40.3
43.8
50.9
35.6
38.9
45.6
30.8
33.9
40.3
26.0
28.9
34.8
23.5
26.3
34.8
49.9
43.5
34.8
30.4
26.0
21.6
19.4
25
43.3
37.3
29.3
25.3
21.3
17.3
15.3
37.4
31.8
24.5
20.8
17.2
13.7
15
32.5
27.3
20.6
17.3
14.0
10.9
9.31
11.9
10
29.8
24.9
18.5
15.4
25.1
20.7
15.0
12.2
9.54
12.3
25
9.39
X
7.01
15
7.96
X
5.81
2.5
13.3
9.49
7.78
5.39
3.36
1.92
1.06
0.711
0.297
1.0
Note: Binomial distribution used for percent nonconforming computations; Poisson for nonconformities per hundred units.
6.5
5.99
31.6
27.0
24.7
19.9
14.8
4.0
4.61
29.1
24.7
22.4
17.8
12.9
9.21
2.77
25.2
21.0
18.8
14.5
7.29
10.0
36.3
1.39
21.2
17.2
15.2
11.3
31.7
0.575
8.51
29.2
0.210
14.5
17.5
11.2
13.8
9.54
12.0
6.43
3.53
5.10
24.2
0.103
12.9
9.72
18.7
0.0201
10.1
7.36
6.07
8.22
3.69
0.25
5.36
10
1.68
6.5
2.78
p (in percent
nonconforming)
2.5
TABLE X-H-1TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 45
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
X
0.65
1.0
1.5
1 3
2 3
78
91
2.5
4.0
6.5
X
10
2.5
4 5
4.0
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
6.5
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
X
15
25
5 9
6 10
7 11
= Use single sampling plan above (or alternatively use code letter L).
Re = Rejection number.
Ac = Acceptance number.
9 14
11 16
10 11 12 13 14 15 18 19 21 22
9 12
6 11
4 9
2 7
0 4
8 13
4 10
9
7 14
11 17 13 19
6 12
10 15 12 17 16 22 19 25
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29
8 13
6 10
3 8
0 5
11 12 12 13 15 16 18 19 23 24 26 27
3 7
8 9
10
15
25
13 14 14 15 18 19 21 22 25 26 32 33 37 38
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
*
#
10 12 12 14 14 17 18 20 21 23 27 29 31 33
7 11
5 10
3 8
1 6
0 4
8 9
3 7
7 8
1.5
2 4
1 3
65
3 5
1 4
0 3
0.40
52
Less than
0.40
0 3
13
0 2
0 3
2 3
39
0 2
1 2
0 3
1.0
Use
Code
Letter
J
# 2
0.65
Use
Code
Letter
K
26
Use
Code
Letter
G
# 2
# 2
3 4
0.40
Higher
than
25
91
78
65
52
39
26
13
64
32
50
size
Cumu-
Higher lative
than
sample
25
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
0.25
1 2
64
32
50
Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 46
SINGLE-USER LICENSE
ONLY,
COPYING
46
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
47
1.0
1.5
2.5
10
12
4.0
14
16
6.5
18
20
10
22
24
26
28
30
32
15
INDIVIDUAL PLANS
34
36
38
1.39
2.16
3.33
4.84
6.52
7.66
10.1
1.5
0.667
1.201
2.09
3.33
4.78
5.79
8.01
1.0
0.132
0.359
0.863
1.72
2.84
3.68
5.59
0.25
75.0
50.0
25.0
10.0
5.0
1.0
1.03
0.0641 0.446
90.0
0.550
0.0126 0.187
95.0
1.0
99.0
0.65
4.0
8.95
6.90
8.61
5.91
7.50
3.99
5.30
2.20
3.18
21.4
23.2
26.6
18.6
20.3
23.6
15.7
17.3
20.5
6.5
14.3
15.8
18.9
11.3
12.7
15.6
4.0
8.16
9.41
12.0
2.5
29.5
26.0
24.2
21.3
18.3
15.5
13.2
11.9
9.76
10
0.65
0.25
5.76
3.74
2.88
1.73
0.866
0.360
0.132
0.064
1.0
8.30
5.93
4.86
3.37
2.10
1.20
0.665
0.444
0.0126 0.186
0.15
1.5
10.5
7.87
6.65
4.90
3.34
2.16
1.38
1.02
0.545
1.0
2.5
4.0
6.5
2.5
12.6
Note: Binomial distribution used for percent nonconforming computations; Poisson for nonconformities per hundred units.
6.5
10
31.8
28.5
25.2
21.8
20.0
16.4
27.4
4.0
25.2
24.3
21.2
18.0
16.4
13.1
11.6
22.2
19.3
16.2
14.7
9.69
21.7
19.0
16.3
8.35
18.3
15.8
13.3
13.5
9.28
10.8
9.59
12.1
7.09
6.39
15.3
4.59
12.9
8.55
7.45
5.27
13.0
8.78
6.79
5.82
3.94
2.18
3.17
10.8
9.61
7.71
5.87
3.27
10.8
9.35
11.6
7.62
5.96
4.38
3.63
4.98
2.23
10
1.71
X
1.03
1.5
10
18.6
16.0
6.30
15.8
13.3
10.8
13.3
9.55
11.9
7.06
9.14
4.57
13.2
11.0
7.91
6.00
10.9
7.93
9.89
6.17
4.51
3.73
5.07
2.28
6.5
3.32
1.04
p (in percent
nonconforming)
2.5
1.73
1.5
TABLE X-J-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
40
15
38.2
33.4
30.9
27.2
23.3
19.9
17.1
15.6
12.9
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
0.15
0.65
0.15
Pa
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
42.9
37.8
35.2
31.2
27.1
23.4
20.3
18.6
15.7
15
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 47
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
X
0.40
0.65
1.0
1 3
2 3
120
140
1.5
2.5
4.0
X
6.5
1.5
4 5
2.5
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
4.0
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
X
10
15
5 9
6 10
7 11
= Use single sampling plan above (or alternatively use code letter M).
Re = Rejection number.
Ac = Acceptance number.
9 14
11 16
10 11 12 13 14 15 18 19 21 22
9 12
6 11
4 9
2 7
0 4
8 13
4 10
9
7 14
11 17 13 19
6 12
10 15 12 17 16 22 19 25
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29
8 13
6 10
3 8
0 5
11 12 12 13 15 16 18 19 23 24 26 27
3 7
8 9
6.5
10
15
13 14 14 15 18 19 21 22 25 26 32 33 37 38
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
*
#
10 12 12 14 14 17 18 20 21 23 27 29 31 33
7 11
5 10
3 8
1 6
0 4
8 9
3 7
7 8
1.0
2 4
1 3
100
3 5
1 4
0 3
0.25
80
Less than
0.25
0 3
20
0 2
0 3
2 3
60
0 2
1 2
0 3
0.65
Use
Code
Letter
K
# 2
0.40
Use
Code
Letter
L
40
Use
Code
Letter
H
# 2
# 2
3 4
0.25
Higher
than
15
140
120
100
80
60
40
20
100
50
80
size
Cumu-
Higher lative
than
sample
15
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
0.15
1 2
100
50
80
Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 48
SINGLE-USER LICENSE
ONLY,
COPYING
48
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
0.0
2.5
5.0
1.5
7.5
2.5
10.0
4.0
12.5
6.5
15.0
17.5
20.0
10
22.5
25.0
49
1.0
1.5
2.5
4.0
6.5
8.41
6.20
5.04
6.72
1.0
3.80
5.31
0.65
2.40
3.68
0.15
5.0
1.0
2.5
13.9
4.0
11.5
10.4
8.64
6.94
5.47
4.35
12.8
10.5
2.81
3.76
3.82
16.1
13.6
12.3
10.4
8.53
6.90
5.62
4.94
4.88
6.5
18.3
15.6
14.2
12.2
10.1
8.34
6.92
6.15
20.0
22.54
24.2
27.5
17.4
19.8
21.4
24.5
13.9
16.1
17.5
20.4
17.3
14.9
11.7
10
14.9
12.7
13.0
10.9
9.79
11.9
9.95
8.24
10.1
8.28
5.98
10
7.40
Note: Values given in the table above are based on the Poisson distribution as an approximation to the binomial distribution (See 11.1 for details)
1.5
10.5
7.42
5.34
4.26
3.11
1.84
10.0
8.04
7.75
4.09
3.14
2.15
9.42
6.14
4.54
5.94
2.94
2.14
1.34
0.555
1.11
25.0
3.38
2.03
1.38
50.0
3.72
4.76
2.52
1.40
0.882
0.425
0.769
0.0843
0.230
75.0
2.09
1.09
0.654
90.0
2.32
3.18
1.43
0.659
0.349
0.119
0.284
0.00804
0.0410
95.0
0.65
99.0
0.40
0.10
Pa
TABLE X-K-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
10
20
30
40
50
60
70
80
90
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
100
INDIVIDUAL PLANS
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 49
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
X
0.25
0.40
0.65
1 3
2 3
192
224
1.0
1.5
2.5
X
4.0
1.0
4 5
1.5
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
2.5
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
X
6.5
10
5 9
6 10
7 11
= Use single sampling plan above (or alternatively use code letter N).
Re = Rejection number.
Ac = Acceptance number.
9 14
11 16
10 11 12 13 14 15 18 19 21 22
9 12
6 11
4 9
2 7
0 4
8 13
4 10
9
7 14
11 17 13 19
6 12
10 15 12 17 16 22 19 25
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29
8 13
6 10
3 8
0 5
11 12 12 13 15 16 18 19 23 24 26 27
3 7
8 9
4.0
6.5
10
13 14 14 15 18 19 21 22 25 26 32 33 37 38
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
*
#
10 12 12 14 14 17 18 20 21 23 27 29 31 33
7 11
5 10
3 8
1 6
0 4
8 9
3 7
7 8
0.65
2 4
1 3
160
3 5
1 4
0 3
0.15
128
Less than
0.15
0 3
32
0 2
0 3
2 3
96
0 2
1 2
0 3
0.40
Use
Code
Letter
L
# 2
0.25
Use
Code
Letter
M
64
Use
Code
Letter
J
# 2
# 2
3 4
0.15
Higher
than
10
224
192
160
128
96
64
32
160
80
125
size
Cumu-
Higher lative
than
sample
10
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
0.10
1 2
160
80
125
Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 50
SINGLE-USER LICENSE
ONLY,
COPYING
50
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
10
20
30
40
50
60
70
80
90
100
0.0
0.25
2.0
0.40
0.65
3.0
4.0
1.0
5.0
1.5
6.0
2.5
7.0
8.0
9.0
4.0
10.0
11.0
12.0
6.5
INDIVIDUAL PLANS
13.0
14.0
15.0
51
0.65
1.0
1.5
2.5
4.0
5.26
3.88
3.15
4.20
0.65
2.37
3.32
0.40
1.50
2.30
1.0
5.0
1.0
2.5
2.39
10.1
8.48
7.70
6.51
5.33
4.31
3.51
3.08
3.05
4.0
11.4
9.72
8.89
7.61
6.33
5.21
4.32
3.84
1.5
8.70
7.22
6.50
5.40
4.33
3.42
2.72
8.00
6.57
1.75
2.35
7.45
8.12
9.34
6.22
6.84
7.95
9.33
5.15
6.12
7.33
15.3
12.7
17.2
13.3
10.9
6.5
14.1
15.1
12.4
10.1
12.5
10.9
8.70
10.8
6.29
5.17
3.74
6.5
4.62
Note: Values given in the table above are based on the Poisson distribution as an approximation to the binomial distribution (See 11.1 for details)
1.0
6.55
4.64
3.34
2.66
1.94
1.15
10.0
5.02
4.84
2.55
1.96
5.89
3.83
2.84
3.71
1.84
1.34
0.839
1.35
0.347
2.98
2.11
1.27
0.144
75.0
0.693
2.33
1.58
0.872
0.551
0.864
0.266
0.481
0.0527
90.0
25.0
1.99
0.409
0.178
50.0
1.45
0.893
1.31
0.412
0.683
0.218
0.0743
0.00503
0.0256
95.0
0.40
99.0
0.25
0.065
Pa
TABLE X-L-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
1.0
0.065
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
16.0
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 51
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
L
0.15
0.25
0.40
1 3
2 3
300
350
0.65
1.0
1.5
X
2.5
0.65
4 5
1.0
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
1.5
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
X
4.0
6.5
5 9
6 10
7 11
= Use single sampling plan above (or alternatively use code letter P).
Re = Rejection number.
Ac = Acceptance number.
9 14
11 16
10 11 12 13 14 15 18 19 21 22
9 12
6 11
4 9
2 7
0 4
8 13
4 10
9
7 14
11 17 13 19
6 12
10 15 12 17 16 22 19 25
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29
8 13
6 10
3 8
0 5
11 12 12 13 15 16 18 19 23 24 26 27
3 7
8 9
2.5
4.0
6.5
13 14 14 15 18 19 21 22 25 26 32 33 37 38
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
*
#
10 12 12 14 14 17 18 20 21 23 27 29 31 33
7 11
5 10
3 8
1 6
0 4
8 9
3 7
7 8
0.40
2 4
1 3
250
3 5
1 4
0 3
0.10
200
Less than
0.10
0 3
50
0 2
0 3
2 3
150
0 2
1 2
0 3
0.25
Use
Code
Letter
M
# 2
0.15
Use
Code
Letter
N
100
Use
Code
Letter
K
# 2
# 2
3 4
Higher
than
6.5
350
300
250
200
150
100
50
250
125
200
size
Cumu-
Higher lative
than
sample
6.5
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
0.10
1 2
250
125
200
Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 52
SINGLE-USER LICENSE
ONLY,
COPYING
52
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
10
20
30
40
50
60
70
80
90
100
0.0
0.040
1.0
2.0
0.65
3.0
1.0
4.0
1.5
5.0
2.5
6.0
7.0
8.0
4.0
9.0
10.0
53
0.40
0.65
1.0
1.5
2.5
3.34
2.46
2.00
2.67
0.40
1.51
2.11
0.25
0.951
1.46
0.065
5.0
1.0
1.0
5.52
1.5
4.58
4.13
3.43
2.75
2.17
1.72
5.08
4.17
1.11
1.49
1.51
6.40
5.38
4.89
4.13
3.39
2.74
2.23
1.96
1.94
2.5
7.24
6.17
5.64
4.83
4.02
3.31
2.74
2.44
10.9
8.47
9.71
6.95
8.08
8.95
9.60
7.86
6.39
4.0
7.92
6.88
5.93
5.93
5.05
3.89
6.90
5.16
4.34
3.27
5.52
4.73
3.95
4.66
3.99
3.28
2.37
4.0
2.94
Note: Values given in the table above are based on the Poisson distribution as an approximation to the binomial distribution (See 11.1 for details)
0.65
4.16
2.94
2.12
1.69
1.23
0.731
10.0
3.19
3.07
1.62
3.74
2.43
1.80
2.36
1.17
0.849
1.24
0.533
0.855
0.220
0.440
25.0
1.89
1.34
50.0
1.48
1.00
0.554
0.805
0.350
0.548
0.169
0.305
0.0335
0.0913
75.0
0.830
0.260
0.113
90.0
0.923
1.26
0.567
0.261
0.434
0.138
0.0472
0.0039
0.0163
95.0
0.25
99.0
0.15
0.040
Pa
TABLE X-M-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
INDIVIDUAL PLANS
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 53
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
M
0.15
0.25
1 3
2 3
480
560
0.40
0.65
1.0
X
1.5
0.40
4 5
0.65
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
1.0
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
X
2.5
4.0
5 9
6 10
7 11
= Use single sampling plan above (or alternatively use code letter Q).
Re = Rejection number.
Ac = Acceptance number.
9 14
11 16
10 11 12 13 14 15 18 19 21 22
9 12
6 11
4 9
2 7
0 4
8 13
4 10
9
7 14
11 17 13 19
6 12
10 15 12 17 16 22 19 25
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29
8 13
6 10
3 8
0 5
11 12 12 13 15 16 18 19 23 24 26 27
3 7
8 9
1.5
2.5
4.0
13 14 14 15 18 19 21 22 25 26 32 33 37 38
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
*
#
10 12 12 14 14 17 18 20 21 23 27 29 31 33
7 11
5 10
3 8
1 6
0 4
8 9
3 7
7 8
0.25
2 4
1 3
400
3 5
1 4
0 3
320
Less than
0.065
0.065
0 3
80
0 2
0 3
2 3
240
0 2
1 2
0 3
0.15
Use
Code
Letter
N
# 2
0.10
Use
Code
Letter
P
160
Use
Code
Letter
L
# 2
# 2
3 4
0.10
Higher
than
4.0
560
480
400
320
240
160
80
400
200
315
size
Cumu-
Higher lative
than
sample
4.0
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
1 2
400
200
315
Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 54
SINGLE-USER LICENSE
ONLY,
COPYING
54
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
0.0
0.10
0.5
0.025
0.25
1.0
0.15
1.5
0.40
2.0
0.65
2.5
1.0
3.0
3.5
1.5
4.0
4.5
5.0
2.5
5.5
INDIVIDUAL PLANS
6.0
6.5
55
0.581
0.796
0.357
0.523
0.165
0.273
0.087
0.164
0.0297
0.0711
0.00201
0.0103
0.65
95.0
0.40
99.0
0.25
1.0
1.5
2.10
1.55
1.26
1.68
0.25
0.949
1.33
0.15
0.599
0.921
0.040
5.0
1.0
0.65
3.48
1.0
2.89
2.60
3.20
2.63
2.16
1.73
1.37
1.09
4.03
3.39
3.08
2.60
2.13
1.72
1.40
1.23
0.954
1.22
1.5
4.56
3.89
3.56
3.04
2.53
2.08
1.73
1.54
6.87
5.34
6.12
4.38
5.09
5.64
6.05
4.95
4.03
2.5
4.99
4.33
3.73
3.74
3.18
2.45
4.35
3.25
2.73
2.06
3.48
2.98
2.49
2.93
2.51
2.07
1.50
2.5
1.85
Note: Values given in the table above are based on the Poisson distribution as an approximation to the binomial distribution (See 11.1 for details)
0.40
2.62
1.85
1.34
1.06
0.778
0.461
10.0
2.01
1.94
1.02
2.35
1.53
1.13
1.48
0.734
0.535
0.784
0.336
0.539
0.139
0.277
25.0
1.19
0.844
75.0
50.0
0.931
0.630
0.349
0.507
0.220
0.345
0.106
0.192
0.0211
0.0575
90.0
0.939
0.701
0.15
0.10
0.025
Pa
TABLE X-N-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 55
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
N
0.10
X
0.065
Use
Code
Letter
Q
0.10
Use
Code
Letter
P
# 2
1 2
0 2
1 2
1 3
1 3
2 3
625
750
875
0.15
0.25
0.40
0.65
X
1.0
0.25
4 5
3 5
2 4
1 4
0 3
0 3
# 2
3 4
0 3
2 3
0.40
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
0.65
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
X
1.5
2.5
5 9
6 10
7 11
= Use single sampling plan above (or alternatively use code letter R).
Re = Rejection number.
Ac = Acceptance number.
9 14
11 16
10 11 12 13 14 15 18 19 21 22
9 12
6 11
4 9
2 7
0 4
8 13
4 10
9
7 14
11 17 13 19
6 12
10 15 12 17 16 22 19 25
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29
8 13
6 10
3 8
0 5
11 12 12 13 15 16 18 19 23 24 26 27
3 7
8 9
1.0
1.5
2.5
13 14 14 15 18 19 21 22 25 26 32 33 37 38
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
*
#
10 12 12 14 14 17 18 20 21 23 27 29 31 33
7 11
5 10
0 4
8 9
3 7
7 8
0.15
0 3
500
Less than
0.040
0.040
Use
Code
Letter
M
0 2
375
# 2
0.065
Higher
than
2.5
875
750
625
500
375
250
125
630
315
500
size
Cumu-
Higher lative
than
sample
2.5
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
250
125
630
315
500
Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 56
SINGLE-USER LICENSE
ONLY,
COPYING
56
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
0.0
0.5
0.15
1.0
0.25
0.40
1.5
0.65
2.0
1.0
2.5
3.0
1.5
3.5
INDIVIDUAL PLANS
4.0
57
0.15
0.25
0.40
0.65
1.0
0.969
0.787
1.05
0.15
0.593
0.830
0.10
0.374
0.576
0.025
5.0
1.0
0.40
2.18
0.65
1.80
1.62
1.35
1.08
0.855
0.679
2.00
1.64
0.438
0.587
2.52
2.12
1.93
1.63
1.33
1.08
0.878
0.771
0.596
0.762
1.0
2.85
2.43
2.22
1.90
1.58
1.30
1.08
0.961
4.29
3.34
3.82
2.74
3.18
3.52
3.78
3.09
2.52
1.5
3.12
2.71
2.33
2.34
1.99
1.53
2.72
2.03
1.71
1.29
2.17
1.86
1.56
1.83
1.57
1.29
0.935
1.5
1.16
Note: Values given in the table above are based on the Poisson distribution as an approximation to the binomial distribution (See 11.1 for details)
0.25
1.64
1.31
0.835
0.665
0.486
0.288
10.0
1.26
1.16
0.630
1.47
0.959
1.21
0.709
0.928
0.459
0.334
0.490
0.210
0.337
0.0866
0.173
25.0
0.745
0.527
0.120
50.0
0.582
0.394
0.218
0.317
0.138
0.216
0.0665
0.0132
0.0360
75.0
0.498
0.327
0.102
0.0444
90.0
0.363
0.223
0.103
0.171
0.0545
0.0186
0.00126
0.00641
95.0
0.10
99.0
0.065
0.015
Pa
TABLE X-P-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 57
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
Double
Single
Type of
sampling
plan
P
0.065
0.10
1 3
2 3
1200
1400
0.15
0.25
0.40
X
0.65
0.15
4 5
0.25
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
0.40
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
X
1.0
1.5
5 9
6 10
7 11
Re = Rejection number.
Ac = Acceptance number.
9 14
11 16
10 11 12 13 14 15 18 19 21 22
9 12
6 11
4 9
2 7
0 4
8 13
4 10
9
7 14
11 17 13 19
6 12
10 15 12 17 16 22 19 25
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29
8 13
6 10
3 8
0 5
11 12 12 13 15 16 18 19 23 24 26 27
3 7
8 9
0.65
1.0
1.5
13 14 14 15 18 19 21 22 25 26 32 33 37 38
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
= Use next subsequent sample size code letter for which acceptance and rejection numbers are available.
*
#
10 12 12 14 14 17 18 20 21 23 27 29 31 33
7 11
5 10
3 8
1 6
0 4
8 9
3 7
7 8
0.10
2 4
1 3
1000
3 5
1 4
0 3
800
Less than
0.025
0.025
0 3
200
0 2
0 3
2 3
600
0 2
1 2
0 3
0.065
Use
Code
Letter
Q
# 2
0.040
Use
Code
Letter
R
400
Use
Code
Letter
N
# 2
# 2
3 4
0.040
Higher
than
1.5
1400
1200
1000
800
600
400
200
1000
500
800
size
Cumu-
Higher lative
than
sample
1.5
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
1 2
1000
500
800
Ac Re
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 58
SINGLE-USER LICENSE
ONLY,
COPYING
58
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
0.0
0.2
0.4
0.6
0.15
0.8
0.25
1.0
0.40
1.2
1.4
0.65
1.6
1.8
2.0
1.0
2.2
INDIVIDUAL PLANS
2.4
2.6
59
0.10
0.15
0.25
0.40
0.65
0.620
0.504
0.672
0.10
0.380
0.531
0.065
0.240
0.368
0.015
5.0
1.0
0.25
1.39
0.40
1.15
1.04
0.864
0.694
0.547
0.435
1.28
1.05
0.281
0.376
0.382
1.61
1.36
1.23
1.04
0.853
0.690
0.562
0.494
0.824
0.979
1.17
1.39
1.61
1.75
2.04
0.692
0.834
1.01
1.22
1.42
1.56
1.83
1.0
2.75
2.00
2.45
1.73
1.49
1.74
2.25
1.49
1.27
2.42
1.30
1.09
2.14
1.19
1.98
1.01
0.995
1.0
0.828
Note: Values given in the table above are based on the Poisson distribution as an approximation to the binomial distribution (See 11.1 for details)
0.740
0.65
0.598
0.488
0.615
0.15
1.05
0.841
0.534
0.426
0.311
0.184
10.0
0.804
0.742
0.409
0.942
0.614
0.775
0.454
0.594
0.294
0.214
0.314
0.134
0.215
0.0555
0.111
25.0
0.476
0.338
0.0769
50.0
0.372
0.252
0.140
0.203
0.0882
0.138
0.0425
0.00843
0.0230
75.0
0.318
0.209
0.109
0.0654
0.0284
90.0
0.232
0.143
0.0659
0.0349
0.0119
0.000804
0.00410
95.0
0.065
99.0
0.040
0.010
Pa
TABLE X-Q-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 59
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
0.015
X
0..025
0.040
0.065
0.10
0.15
0.25
X
0.40
X
0.65
0.040
Use
Code
Letter
R
3 4
# 2
# 2
0 3
2 3
1 2
0 2
1 2
1 3
2 3
1890
2205
0.10
4 5
0.15
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
0.25
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
1.0
5 9
6 10
7 11
9 12
6 11
4 9
2 7
0 4
Re = Rejection number.
11 16
8 13
4 10
9
7 14
11 17 13 19
6 12
10 15 12 17 16 22 19 25
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29
8 13
6 10
3 8
0 5
0.40
0.65
1.0
13 14 14 15 18 19 21 22 25 26 32 33 37 38
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
Ac = Acceptance number.
9 14
10 11 12 13 14 15 18 19 21 22
11 12 12 13 15 16 18 19 23 24 26 27
3 7
8 9
10 12 12 14 14 17 18 20 21 23 27 29 31 33
7 11
5 10
3 8
1 6
0 4
8 9
3 7
7 8
0.065
2 4
1 3
1575
3 5
1 4
0 3
1260
0 3
0.025
Use
Code
Letter
S
0 2
Use
Code
Letter
P
945
0.015
0 3
*
#
Higher
than
1.0
2205
1890
1575
1260
945
630
315
1600
800
1250
size
Cumu-
Higher lative
than
sample
1.0
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
0.010
# 2
0.010
Use
Code
Letter
R
Ac Re
630
315
1600
800
Single
Double
1250
Type of
sampling
plan
Q
Cumulative
sample
size
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 60
SINGLE-USER LICENSE
ONLY,
COPYING
60
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
10
20
30
40
50
60
70
80
90
100
0.1
0.025
0.2
0.040
0.3
0.065
0.4
0.10
0.5
0.15
0.6
0.25
0.7
0.8
0.9
0.40
1.0
1.1
1.2
INDIVIDUAL PLANS
0.65
1.3
1.4
1.5
61
0.10
0.15
0.25
0.40
0.657
0.464
0.526
0.334
0.388
0.502
0.10
0.266
0.315
0.420
0.065
0.194
0.237
0.332
0.040
10.0
5.0
1.0
0.870
0.25
0.800
0.722
0.432
0.521
0.633
0.761
0.889
0.972
1.14
0.351
0.431
0.533
0.651
0.770
0.848
1.01
0.40
0.384
0.305
0.239
0.308
1.72
1.53
1.09
1.27
Note: Values given in the table above are based on the Poisson distribution as an approximation to the binomial distribution (See 11.1 for details)
1.41
1.51
1.33
1.01
0.65
1.25
1.24
1.08
0.933
0.934
0.795
0.612
1.09
0.812
0.684
0.515
0.733
0.745
0.622
0.870
0.629
0.517
0.462
0.65
0.374
0.15
0.655
0.589
0.371
0.650
0.433
0.540
0.383
0.484
0.284
0.184
0.255
0.134
0.196
0.0839
0.298
0.0864
0.0481
75.0
0.135
0.342
0.233
0.158
0.211
0.0872
0.127
0.0551
0.0266
90.0
25.0
0.272
0.199
0.131
0.0683
0.0409
50.0
0.175
0.235
0.145
0.0893
0.0412
0.0218
0.00743
0.0178
95.0
0.065
99.0
0.040
0.025
Pa
TABLE X-R-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR SINGLE SAMPLING PLANS
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
0.0
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 61
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
PLANS
Multiple
0.010
0.015
X
0.025
0.040
0 3
1 3
2 3
3000
3500
0.10
0.15
X
0.25
0.065
4 5
.010
6 7
4 6
3 6
2 5
1 4
0 3
# 3
4 5
1 4
3 4
0.15
9 10
7 9
5 8
3 7
2 6
1 5
# 4
6 7
2 5
5 6
X
0.40
5 9
6 10
7 11
9 14
Re = Rejection number.
Ac = Acceptance number.
11 16
10 11 12 13 14 15 18 19 21 22
9 12
6 11
4 9
2 7
0 4
8 13
4 10
9
7 14
11 17 13 19
6 12
10 15 12 17 16 22 19 25
7 12
3 9
0 6
11 15 14 17 17 20 22 25 25 29
8 13
6 10
3 8
0 5
11 12 12 13 15 16 18 19 23 24 26 27
3 7
8 9
0.25
0.40
0.65
13 14 14 15 18 19 21 22 25 26 32 33 37 38
= Use next preceding sample size code letter for which acceptance and rejection numbers are available.
*
#
0.65
10 12 12 14 14 17 18 20 21 23 27 29 31 33
7 11
5 10
0 4
8 9
3 7
7 8
0.040
2 4
1 3
2500
3 5
1 4
0 3
2000
0.010
*
0 2
0 3
2 3
1500
0 2
1 2
0 3
0.025
Use
Code
Letter
S
# 2
Use
Code
Letter
P
1000
0.015
Use
Code
Letter
Q
# 2
# 2
3 4
500
0.065
Higher
than
0.65
3500
3000
2500
2000
1500
1000
500
2500
1250
2000
size
Cumu-
Higher lative
than
0.65 sample
Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re
1 2
2500
1250
Single
Double
2000
Type of
sampling
plan
R
Cumulative
sample
size
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 62
SINGLE-USER LICENSE
ONLY,
COPYING
62
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
63
2
2
3
3
3
3
#
0
0
1
1
2
1600
2400
3200
4000
4800
5600
800
0.025
4000
2000
Re = Rejection number.
Ac = Acceptance number.
Multiple
Double
2000
Single
X
Re
Type of
sampling
plan
Ac
Cumulative
sample
size
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 63
SINGLE-USER LICENSE
ONLY,
COPYING
PLANS
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
AOQL
SCHEME
PERFORMANCE
Code
Letter
.019
.030
.048
.046
.078
.077
.072
.13
.13
.12
.12
0.25
0.40
(1.2)
1.2
0.65
(1.9)
1.9
1.0
(2.8)
2.9
1.5
(4.4)
4.7
2.5
.20
.21
.20
.20
.18
.31
.32
.32
.31
.31
.29
.45
.49
.49
.51
.50
.48
.46
.71
.72
.76
.78
.80
.78
.77
1.2
1.2
1.3
1.3
1.3
1.3
1.8
1.8
2.0
2.0
2.1
2.9
2.9
3.1
3.2
(2.9)
2.9
(.74)
(1.8) (3.0)
.75
1.8
3.0
(.47)
(1.2) (2.0) (3.2)
.47
1.2
2.0
3.1
(.30)
(.72) (1.2) (2.0) (3.2)
.30
.72
1.2
2.0
3.2
0.15
4.5
4.5
4.9
(4.5)
4.5
(4.9)
4.8
(4.9)
4.9
(5.1)
5.1
(5.0)
4.9
(6.8)
7.5
4.0
6.5
7.1
7.2
(7.0)
7.0
(7.5)
7.4
(7.9)
7.8
(8.7)
7.9
(8.0)
7.8
(7.7)
7.6
(11)
13
12
(12)
12
(13)
12
(13)
12
(14)
13
(13)
13
(13)
13
(12)
12
10
29
18
45
45
47
49
51
52
48
40
71
69
76
78
84
78
65
110
120
130
130
130
100
170
180
180
210
200
150
28
18
18
31
30
32
31
32
30
25
20
20
20
20
19
15
Note: For a better approximation to the AOQL, the above values must be multiplied by 1
.029
.047
.075
.12
.19
260
270
290
300
310
250
(In nonconformities per hundred units, also applicable to percent nonconforming for AQL less than 15
with specific values for percent nonconforming shown in parentheses)
Table XIAverage Outgoing Quality Limit Factors for ANSI/ASQ Z1.4 Scheme Performance
410
430
480
450
400
660
710
710
650
1100
1100
1000
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:45 AM
Page 64
SINGLE-USER LICENSE
ONLY,
COPYING
64
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
65
Code
Letter
.115
.184
.123
.288
.194
.194
.460
.266
.311
.311
.731
.334
.426
.486
.486
1.15
.464
.534
.665
.778
.778
(1.83)
1.84
0.15
.650
.742
.835
1.06
1.23
1.23
(2.84)
2.88
0.25
.889
1.04
1.16
1.34
1.69
1.94
1.94
(4.50)
4.60
0.40
(10.9)
11.5
1.0
1.24
1.42
1.62
1.85
2.12
2.66
3.11
1.98
2.22
2.60
2.94
3.34
4.26
(4.77)
4.86
(3.08) (4.77)
3.11 4.86
(6.94)
7.19
0.65
3.09
3.56
4.13
4.64
5.34
(7.56)
7.78
(7.56)
7.78
(6.52)
6.65
(16.2)
17.7
1.5
4.95
5.64
6.50
7.42
(11.6)
12.2
(11.6)
12.2
(10.3)
10.6
(8.16)
8.35
(25.0)
28.8
2.5
7.86
8.89
10.4
(18.1)
19.4
(18.1)
19.4
(15.8)
16.6
(12.9)
13.4
(11.3)
11.6
(36.9)
46.0
4.0
12.4
14.2
(26.8)
29.9
(26.8)
29.9
(24.5)
26.6
(19.7)
20.9
(17.8)
18.5
(15.7)
16.2
(53.6)
76.7
6.5
10
19.8
(40.6)
48.6
(40.6)
48.6
(36.0)
40.9
(30.4)
33.4
(27.1)
29.0
(24.7)
26.0
(21.4)
22.2
30.9
35.6
40.6
46.4
51.4
66.5
77.8
77.8
15
49.5
55.6
65.0
71.3
83.5
106
130
130
25
77.4
88.9
100
116
134
177
194
40
124
137
162
185
223
266
65
190
222
260
309
334
100
269
309
356
433
464
150
388
437
495
593
650
250
(In nonconformities per hundred units, also applicable to percent nonconforming for AQL less than 15
with specific values for percent nonconforming shown in parentheses)
631
699
825
889
400
Table XIILimiting Quality for ANSI/ASQ Z1.4 Scheme Performance for Which Pa = 10 Percent
1000
1010
1170 1680
1240 1750
650
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 65
SINGLE-USER LICENSE
ONLY,
COPYING
LQ 10%
SCHEME
PERFORMANCE
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
LQ 5%
SCHEME
PERFORMANCE
Code
Letter
.150
.240
.151
.374
.237
.237
.599
.315
.379
.379
.951
.388
.504
.593
.593
1.50
.526
.620
.787
.949
.949
(2.37)
2.40
0.15
.722
.841
.969
1.26
1.51
1.51
(3.68)
3.74
0.25
.972
1.15
1.31
1.55
2.00
2.37
2.37
(5.81)
5.99
0.40
(13.9)
15.0
1.0
1.33
1.56
1.80
2.10
2.46
3.15
3.79
2.14
2.43
2.89
3.34
3.88
5.04
(5.79)
5.93
(3.74) (5.79)
3.79 5.93
(8.94)
9.36
0.65
3.34
3.89
4.58
5.26
6.20
(9.14)
9.49
(9.14)
9.49
(7.66)
7.87
(20.6)
23.0
1.5
5.34
6.17
7.22
8.41
(14.0)
14.8
(14.0)
14.8
(12.1)
12.6
(9.41)
9.69
(31.2)
37.4
2.5
8.47
9.72
11.5
(21.6)
23.7
(21.6)
23.7
(18.4)
19.7
(14.8)
15.5
(12.7)
13.1
(45.1)
59.9
4.0
13.3
15.6
(31.6)
36.5
(31.6)
36.5
(28.3)
31.5
(22.5)
24.2
(19.9)
21.0
(17.3)
18.0
(63.2)
99.8
6.5
10
21.4
(47.1)
59.3
(47.1)
59.3
(41.0)
48.4
(34.4)
38.8
(30.1)
32.9
(27.0)
28.9
(23.2)
24.3
33.4
38.9
45.1
52.6
59.6
78.7
94.9
94.9
15
53.4
60.8
72.2
80.9
96.9
126
158
158
25
83.4
97.2
111
131
155
210
237
40
133
150
180
210
258
315
65
205
243
289
350
388
100
286
334
389
481
526
150
409
465
534
648
722
250
(In nonconformities per hundred units, also applicable to percent nonconforming for AQL less than 15
with specific values for percent nonconforming shown in parentheses)
665
745
890
972
400
Table XIIILimiting Quality for ANSI/ASQ Z1.4 Scheme Performance for Which Pa = 5 Percent
1000
1060
1240 1770
1340 1860
650
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 66
SINGLE-USER LICENSE
ONLY,
COPYING
66
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 67
SINGLE-USER LICENSE
ONLY,
COPYING
Table XIVAverage Sample Size Tables for ANSI/ASQ-Z1.4 Scheme Performance (Single Sampling)
TABLE XIVA Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
Code A
6.5
6.5
25
40
65
100
150
250
400
650
1000
*
99.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
95.0
2.1
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
90.0
2.1
2.1
2.2
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
75.0
2.5
2.5
2.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
50.0
2.9
2.9
2.9
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
25.0
3.0
3.0
3.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
10.0
3.0
3.0
3.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
5.0
3.0
3.0
3.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
1.0
3.0
3.0
3.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
TABLE XIVB Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
Code B
4.0
4.0
15
25
40
65
100
150
250
400
650
1000
*
99.0
2.1
2.1
2.7
2.6
2.5
2.7
2.4
2.7
2.5
2.7
2.4
2.7
95.0
2.6
2.6
3.1
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
90.0
3.1
3.1
3.3
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
75.0
4.0
4.0
4.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
50.0
4.8
4.8
4.8
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
25.0
5.0
5.0
5.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
10.0
5.0
5.0
5.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5.0
5.0
5.0
5.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
1.0
5.0
5.0
5.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
TABLE XIVC Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
Code C
2.5
10
2.5
10
15
25
p (in percent
nonconforming)
40
65
100
150
250
400
650
99.0
2.4
3.7
2.4
3.6
3.5
4.0
4.2
4.1
4.1
4.2
4.3
4.0
3.4
95.0
3.6
4.8
3.6
4.8
4.8
4.9
5.0
5.0
5.0
5.0
5.0
5.0
5.0
90.0
4.7
5.4
4.7
5.4
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
75.0
6.5
6.5
6.5
6.6
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
50.0
7.8
7.7
7.8
7.7
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
25.0
8.0
8.0
8.0
8.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
10.0
8.0
8.0
8.0
8.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
8.0
8.0
8.0
8.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
1.0
8.0
8.0
8.0
8.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
TABLE XIVD Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
Code D
1.5
6.5
10
1.5
6.5
10
p (in percent
nonconforming)
15
25
40
65
100
150
250
400
99.0
3.7
5.8
5.3
3.7
5.7
5.1
6.2
6.6
6.6
5.9
5.8
7.0
6.1
5.4
95.0
5.7
7.7
7.4
5.7
7.6
7.2
7.8
7.9
8.0
7.9
7.9
8.0
8.0
7.9
90.0
7.4
8.6
7.9
7.4
8.6
7.8
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
75.0
11
11
8.0
11
11
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
50.0
13
13
8.0
13
13
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
25.0
13
13
8.0
13
13
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
10.0
13
13
8.0
13
13
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
5.0
13
13
8.0
13
13
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
1.0
13
13
8.0
13
13
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
67
D
AVERAGE
SAMPLE
SIZE SCHEME
PERFORMANCE
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 68
SINGLE-USER LICENSE
ONLY,
COPYING
Table XIVAverage Sample Size Tables for ANSI/ASQ Z1.4 Scheme Performance (Single Sampling)
TABLE XIVE Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
Code E
1.0
4.0
6.5
10
1.0
4.0
6.5
99.0
6.0
95.0
9.2
9.4
8.6
10
15
25
40
65
100
150
11
6.0
12
12
13
9.2
10
11
10
10
11
12
9.3
12
8.4
13
13
13
13
9.8
13
8.9
13
13
13
12
14
13
13
12
14
13
13
13
13
13
13
13
13
13
75.0
17
17
13
13
17
17
13
13
13
13
13
13
13
13
13
50.0
19
19
13
13
19
19
13
13
13
13
13
13
13
13
13
25.0
20
20
13
13
20
20
13
13
13
13
13
13
13
13
13
10.0
20
20
13
13
20
20
13
13
13
13
13
13
13
13
13
5.0
20
20
13
13
20
20
13
13
13
13
13
13
13
13
13
1.0
20
20
13
13
20
20
13
13
13
13
13
13
13
13
13
Code F
.65
2.5
4.0
6.5
10
.65
2.5
4.0
6.5
10
15
25
40
65
9.5
14.6
13.4
15.7
17.9
9.5
14.5
13.2
15.3
16.8
17.8
16.2
15.1
15.7
95.0
14.4
19.1
18.5
19.5
19.0
14.4
19.0
18.3
19.3
19.8
20.0
19.9
19.8
19.9
90.0
18.6
21.5
19.7
19.9
20.0
18.6
21.5
19.6
19.9
20.0
20.0
20.0
20.0
20.0
75.0
26.1
26.2
20.0
20.0
20.0
26.0
26.2
20.0
20.0
20.0
20.0
20.0
20.0
20.0
50.0
31.0
30.9
20.0
20.0
20.0
31.0
30.9
20.0
20.0
20.0
20.0
20.0
20.0
20.0
25.0
32.0
32.0
20.0
20.0
20.0
32.0
32.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
10.0
32.0
32.0
20.0
20.0
20.0
32.0
32.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
5.0
32.0
32.0
20.0
20.0
20.0
32.0
32.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
1.0
32.0
32.0
20.0
20.0
20.0
32.0
32.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
TABLE XIVG Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
8.6
90.0
TABLE XIVF Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
250
Code G
.4
1.5
2.5
4.0
6.5
10
.4
1.5
2.5
4.0
6.5
10
15
25
40
15.5
25.1
21.4
25.0
28.1
28.6
15.5
24.9
21.3
24.6
27.1
27.0
26.8
24.4
26.3
95.0
23.1
31.7
29.5
31.2
31.9
32.0
23.1
31.7
29.4
31.0
31.7
31.8
31.9
31.8
31.9
90.0
29.7
34.6
31.4
31.9
32.0
32.0
29.7
34.6
31.4
31.8
32.0
32.0
32.0
32.0
32.0
75.0
41.1
41.4
32.0
32.0
32.0
32.0
41.1
41.4
32.0
32.0
32.0
32.0
32.0
32.0
32.0
50.0
48.6
48.3
32.0
32.0
32.0
32.0
48.6
48.3
32.0
32.0
32.0
32.0
32.0
32.0
32.0
25.0
50.0
50.0
32.0
32.0
32.0
32.0
50.0
50.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
10.0
50.0
50.0
32.0
32.0
32.0
32.0
50.0
50.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
5.0
50.0
50.0
32.0
32.0
32.0
32.0
50.0
50.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
1.0
50.0
50.0
32.0
32.0
32.0
32.0
50.0
50.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
TABLE XIVH Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
Code H
.25
1.0
1.5
2.5
4.0
6.5
10
.25
1.0
1.5
2.5
4.0
6.5
10
15
25
23.8
36.3
35.6
40.3
43.1
42.4
43.4
23.8
36.2
35.3
39.8
42.1
40.8
40.5
41.9
42.7
95.0
36.0
47.7
47.8
49.2
49.7
49.8
50.0
36.0
47.6
47.7
49.0
49.6
49.6
49.8
49.9
50.0
90.0
46.5
53.7
49.6
49.9
50.0
50.0
50.0
46.5
53.7
49.6
49.9
49.9
50.0
50.0
50.0
50.0
75.0
65.1
65.6
50.0
50.0
50.0
50.0
50.0
65.1
65.6
50.0
50.0
50.0
50.0
50.0
50.0
50.0
50.0
77.6
77.1
50.0
50.0
50.0
50.0
50.0
77.6
77.2
50.0
50.0
50.0
50.0
50.0
50.0
50.0
25.0
79.9
79.9
50.0
50.0
50.0
50.0
50.0
79.9
79.9
50.0
50.0
50.0
50.0
50.0
50.0
50.0
10.0
80.0
80.0
50.0
50.0
50.0
50.0
50.0
80.0
80.0
50.0
50.0
50.0
50.0
50.0
50.0
50.0
5.0
80.0
80.0
50.0
50.0
50.0
50.0
50.0
80.0
80.0
50.0
50.0
50.0
50.0
50.0
50.0
50.0
80.0
80.0
50.0
50.0
50.0
50.0
50.0
80.0
80.0
50.0
50.0
50.0
50.0
50.0
50.0
50.0
AVERAGE
1.0
SAMPLE
SIZE SCHEME
PERFORMANCE
68
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 69
SINGLE-USER LICENSE
ONLY,
COPYING
Table XIVAverage Sample Size Tables for ANSI/ASQ Z1.4 Scheme Performance (Single Sampling)
TABLE XIVJ Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
Code J
.15
.65
1.0
1.5
2.5
4.0
6.5
10
.15
.65
1.0
1.5
2.5
4.0
6.5
10
15
38.3
58.0
52.9
64.2
68.3
68.7
64.2
64.7
38.3
57.9
52.8
63.7
67.3
67.1
61.7
60.5
73.5
95.0
57.5
76.2
73.4
78.6
79.5
79.7
79.6
79.8
57.5
76.1
73.2
78.5
79.3
79.6
79.3
79.3
80.0
90.0
74.0
85.5
78.5
79.8
79.9
80.0
80.0
80.0
74.0
85.4
78.4
79.8
79.9
80.0
80.0
80.0
80.0
75.0
103
103
80.0
80.0
80.0
80.0
80.0
80.0
103
103
80.0
80.0
80.0
80.0
80.0
80.0
80.0
50.0
121
121
80.0
80.0
80.0
80.0
80.0
80.0
121
121
80.0
80.0
80.0
80.0
80.0
80.0
80.0
25.0
125
125
80.0
80.0
80.0
80.0
80.0
80.0
125
125
80.0
80.0
80.0
80.0
80.0
80.0
80.0
10.0
125
125
80.0
80.0
80.0
80.0
80.0
80.0
125
125
80.0
80.0
80.0
80.0
80.0
80.0
80.0
5.0
125
125
80.0
80.0
80.0
80.0
80.0
80.0
125
125
80.0
80.0
80.0
80.0
80.0
80.0
80.0
1.0
125
125
80.0
80.0
80.0
80.0
80.0
80.0
125
125
80.0
80.0
80.0
80.0
80.0
80.0
80.0
TABLE XIVK Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
Code K
.10
.40
.65
1.0
1.5
2.5
4.0
6.5
10
59.6
95.0
90.1
109
105
101
119
90.5
114
82.4
123
99.6
124
124
124
124
92.6
125
107
90.0
116
134
123
125
125
125
125
125
125
75.0
163
164
125
125
125
125
125
125
125
50.0
194
193
125
125
125
125
125
125
125
25.0
200
200
125
125
125
125
125
125
125
10.0
200
200
125
125
125
125
125
125
125
5.0
200
200
125
125
125
125
125
125
125
1.0
200
200
125
125
125
125
125
125
125
TABLE XIVL Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
Code L
.065
.25
.40
.65
1.0
1.5
2.5
4.0
6.5
132
153
168
178
162
151
157
95.0
144
190
183
193
198
200
199
198
199
90.0
185
214
196
199
200
200
200
200
200
75.0
258
260
200
200
200
200
200
200
200
50.0
306
304
200
200
200
200
200
200
200
25.0
315
315
200
200
200
200
200
200
200
10.0
315
315
200
200
200
200
200
200
200
5.0
315
315
200
200
200
200
200
200
200
1.0
315
315
200
200
200
200
200
200
200
99.0
95.6
TABLE XIVM Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
Acceptance Quality Limits (normal inspection)
Pa
.04
.15
.25
.40
.65
1.0
1.5
2.5
4.0
149
244
207
240
264
263
268
242
263
95.0
226
312
288
304
312
313
314
313
315
90.0
292
342
309
313
315
315
315
315
315
75.0
408
411
315
315
315
315
315
315
315
50.0
485
483
315
315
315
315
315
315
315
25.0
500
499
315
315
315
315
315
315
315
10.0
500
500
315
315
315
315
315
315
315
5.0
500
500
315
315
315
315
315
315
315
1.0
500
500
315
315
315
315
315
315
315
69
Code M
M
AVERAGE
SAMPLE
SIZE SCHEME
PERFORMANCE
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 70
SINGLE-USER LICENSE
ONLY,
COPYING
Table XIVAverage Sample Size Tables for ANSI/ASQ Z1.4 Scheme Performance (Single Sampling)
TABLE XIVN Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
.025
.10
.15
.25
.40
.65
1.0
1.5
2.5
238
362
353
398
421
407
405
419
427
95.0
360
476
477
490
496
496
498
499
499
90.0
465
537
496
499
499
500
500
500
500
75.0
651
656
500
500
500
500
500
500
500
50.0
776
772
500
500
500
500
500
500
500
25.0
799
799
500
500
500
500
500
500
500
10.0
800
800
500
500
500
500
500
500
500
5.0
800
800
500
500
500
500
500
500
500
1.0
800
800
500
500
500
500
500
500
500
TABLE XIVP Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
.015
.065
.10
.15
.25
.40
.65
1.0
1.5
378
576
523
634
670
667
610
598
730
95.0
572
759
730
784
793
795
792
793
800
90.0
738
854
784
798
799
800
800
800
800
75.0
1027
1035
800
800
800
800
800
800
800
50.0
1214
1208
800
800
800
800
800
800
800
25.0
1249
1249
800
800
800
800
800
800
800
10.0
1250
1250
800
800
800
800
800
800
800
5.0
1250
1250
800
800
800
800
800
800
800
1.0
1250
1250
800
800
800
800
800
800
800
Code Q
.01
.04
.065
.10
.15
.25
.40
.65
1.0
596
905
824
996
1090
1050
1010
926
1070
95.0
901
1190
1140
1230
1240
1240
1250
1240
1250
90.0
1160
1340
1230
1250
1250
1250
1250
1250
1250
75.0
1630
1640
1250
1250
1250
1250
1250
1250
1250
50.0
1940
1930
1250
1250
1250
1250
1250
1250
1250
25.0
2000
2000
1250
1250
1250
1250
1250
1250
1250
10.0
2000
2000
1250
1250
1250
1250
1250
1250
1250
5.0
2000
2000
1250
1250
1250
1250
1250
1250
1250
1.0
2000
2000
1250
1250
1250
1250
1250
1250
1250
TABLE XIVR Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
Code P
TABLE XIVQ Tabulated Values for Average Sample Size for ANSI/ASQ Z1.4 Scheme Performance
Code N
Code R
.025
.040
.065
.10
.15
.25
.40
.65
1450
1320
1530
1680
1780
1620
1510
1570
95.0
1900
1830
1930
1980
2000
1990
1980
1990
90.0
2140
1960
1990
2000
2000
2000
2000
2000
75.0
2600
2000
2000
2000
2000
2000
2000
2000
50.0
3040
2000
2000
2000
2000
2000
2000
2000
25.0
3150
2000
2000
2000
2000
2000
2000
2000
10.0
3150
2000
2000
2000
2000
2000
2000
2000
5.0
3150
2000
2000
2000
2000
2000
2000
2000
3150
2000
2000
2000
2000
2000
2000
2000
AVERAGE
1.0
SAMPLE
SIZE SCHEME
PERFORMANCE
70
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
40
200
65
300
100
400
150
500
250
600
700
800
400
900
1000
1100
650
1200
1300
1400
1500
1600
1000
1700
1800
1900
2000
6.5
154
221
332
420
502
655
526
63.2
1.0
5.0
388
130
76.7
53.6
10.0
315
464
334
266
194
89.9
46.3
37.0
237
372
256
196
135
57.8
23.8
21.2
25.0
50.0
158
294
195
138
88.5
99.8
248
75.0
78.4
214
138
162
79.9
103
63.7
4.84
47.9
66.1
38.0
145
192
89.1
123
41.2
38.7
90.0
250
400
650
871
722
650
540
443
380
333
302
239
1140
972
889
761
642
560
497
456
374
1530
1340
1240
1090
948
855
783
734
628
150
21.8
100
17.5
65
0.502
40
2.53
7.43
25
0.501
6.5
2.50
p (in percent
nonconforming)
24.6
95.0
99.0
Pa
2090
1860
1750
1570
1400
1270
1180
1110
977
1000
TABLE XV-A-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
100
25
4.96
6.5
11.4
71
10.8
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 71
SINGLE-USER LICENSE
ONLY,
COPYING
SCHEME
PERFORMANCE
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
SCHEME
PERFORMANCE
10
20
30
40
50
60
70
80
90
100
0.0
200
65
300
100
400
150
500
250
600
700
400
800
900
1000
1100
650
1200
1300
1400
1500
1600
1000
1700
1800
1900
2000
4.0
6.94
13.4
24.2
36.9
45.1
60.2
25.0
10.0
5.0
1.0
3.40
90.0
50.0
1.96
95.0
75.0
0.467
p (in percent
nonconforming)
99.0
Pa
309
350
223
258
177
210
130
158
77.8
94.9
46.0
59.9
437
248
171
131
89.9
53.9
27.8
335
196
130
59.0
35.1
280
165
108
68.8
92.0
42.4
23.8
7.19
14.4
221
143
92.2
53.3
31.9
133
128
81.9
44.4
25.8
15.9
92.5
11.6
92.2
150
250
400
581
481
433
360
295
253
222
201
154
761
648
593
507
428
373
332
304
244
1020
890
825
725
632
570
522
489
401
100
60.2
65
31.4
40
16.2
25
1.98
5.46
15
3.46
0.468
4.0
1390
1240
1170
1050
931
850
785
742
637
650
1950
1770
1680
1540
1400
1290
1200
1150
1010
1000
TABLE XV-B-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
100
4.0 15 25 40
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 72
SINGLE-USER LICENSE
ONLY,
COPYING
72
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
73
100
40
150
65
200
250
300
10
20
30
0.0
100
200
100
300
150
400
250
500
600
400
700
800
900
650
1000
1100
58.9
57.6
37.4
83.0
59.3
133
94.9
168
126
201
155
31.2
1.0
5.0
47.1
134
77.8
48.6
43.7
102
78.5
106
53.9
33.07
8.98
20.9
8.58
28.8
77.8
55.2
35.4
21.8
17.3
64.7
41.3
4.46
40.6
55.3
32.0
19.2
25.5
9.79
14.6
2.29
10.2
14.7
4.36
49.2
26.6
15.7
7.29
2.26
37.7
18.4
10.8
3.83
0.416
1.43
4.16
7.73
25.0
65
100
150
250
262
210
185
149
117
99.0
85.7
76.9
61.3
348
289
260
216
177
152
133
121
100
457
389
356
304
257
224
199
183
154
612
534
495
435
379
342
313
294
256
40
0.416
25
15
10
2.5
1.42
2.5
10
p (in percent
nonconforming)
30.3
50.0
75.0
90.0
95.0
99.0
Pa
835
745
699
627
559
510
471
445
399
400
1170
1060
1010
924
838
774
722
689
640
650
TABLE XV-C-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
50
25
25.0
0.0
2.5 10 15
40
50
60
70
80
90
100
15.9
SCHEME
PERFORMANCE
10.0
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
1200
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 73
SINGLE-USER LICENSE
ONLY,
COPYING
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
SCHEME
PERFORMANCE
0
0
0.0
100
65
200
100
300
150
400
250
500
600
400
0.911
1.43
2.73
5.38
10.1
16.2
20.6
29.8
90.0
75.0
50.0
25.0
10.0
5.0
1.0
0.272
99.0
95.0
1.5
Pa
41.3
35.5
51.1
83.0
105
78.7
59.3
36.5
23.0
58.9
66.5
48.6
29.9
17.7
47.1
31.6
40.6
26.8
49.0
33.7
20.7
10.7
30.3
19.4
34.5
5.53
21.3
25.8
9.07
2.77
16.2
9.10
13.1
22.1
20.0
12.1
6.10
12.7
6.26
15.9
16.6
10.1
4.57
0.915
1.44
10.7
4.73
13.5
11.6
7.20
2.43
0.273
7.86
15
10
6.5
1.5
2.55
6.5
10
p (in percent
nonconforming)
40
65
100
126
96.9
83.5
64.0
48.6
40.4
34.6
30.8
23.7
164
131
116
92.9
73.4
61.9
53.5
48.0
38.3
218
180
162
135
111
95.0
83.2
75.7
64.1
285
243
222
190
161
140
124
114
99.7
25
382
334
309
272
237
214
196
184
160
150
522
465
437
392
349
319
294
278
252
250
732
665
631
577
524
484
451
431
403
400
TABLE XV-D-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
10
10
20
30
30
20
40
40
40
50
50
25
60
60
15
70
70
10
80
80
6.5
90
90
1.5
100
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
700
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 74
SINGLE-USER LICENSE
ONLY,
COPYING
74
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
75
0.0
50
15 25
100
40
65
150
100
200
250
150
300
350
250
400
450
500
51.1
36.5
33.2
23.7
23.1
15.0
50.6
41.0
41.3
31.6
21.6
13.9
5.0
1.0
28.9
29.9
36.0
20.6
20.7
13.5
19.4
6.94
11.5
28.0
6.70
25.0
26.8
13.3
8.55
3.51
19.4
13.6
8.70
3.58
20.7
18.1
9.80
5.76
1.75
9.88
12.9
7.42
3.80
0.893
12.9
16.2
7.64
3.86
5.77
1.74
6.19
2.82
0.560
0.889
4.41
1.48
0.165
7.62
10.9
4.64
6.42
1.53
2.88
0.165
6.5
4.0
1.0
10
0.558
4.0
6.5
p (in percent
nonconforming)
1.0
10.9
SCHEME
PERFORMANCE
10.0
50.0
75.0
90.0
95.0
99.0
Pa
15
25
40
65
64.7
48.4
40.9
30.2
21.2
15.9
12.3
10.2
7.13
77.3
59.6
51.4
39.4
29.9
24.9
21.3
18.9
14.4
101
80.9
71.3
57.2
45.2
38.1
32.9
29.6
23.7
134
111
100
83.1
68.1
58.4
51.2
46.6
39.3
176
150
137
117
98.8
86.2
76.5
70.6
62.2
10
235
205
190
167
146
132
120
113
100
100
321
286
269
241
215
196
181
171
153
150
450
409
388
355
322
298
278
265
248
250
TABLE XV-E-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
0
10 15 20 25 30 35 40 45 50 55 60
0
0.0 5
10
30
30
10
40
40
20
50
50
10
60
60
6.5
70
70
4.0
80
80
1.0
90
90
20
100
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 75
SINGLE-USER LICENSE
ONLY,
COPYING
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
SCHEME
PERFORMANCE
30
40
50
0.0
20
40
15
60
25
80
40
100
65
120
140
160
0.357
0.571
1.11
2.22
4.24
6.94
8.94
95.0
90.0
75.0
50.0
25.0
10.0
5.0
13.4
0.104
99.0
1.0
.65
Pa
12.2
14.8
7.19
9.36
30.4
34.4
24.5
28.3
18.1
21.6
11.6
14.0
20.7
8.43
4.34
24.3
18.7
12.9
8.21
14.4
5.46
2.24
13.6
8.71
5.40
42.1
3.66
1.11
16.5
19.2
10.4
6.40
3.66
35.8
2.45
0.572
14.4
8.24
4.91
2.47
28.9
1.82
0.358
13.0
6.94
4.11
1.85
19.0
.958
0.104
10.1
4.93
2.94
2.5
.65
10
4.0
6.5
p (in percent
nonconforming)
.978
2.5
33.2
23.7
19.4
13.5
8.85
6.37
4.82
4.02
2.84
4.0
10
15
25
42.0
31.5
26.6
19.6
13.8
10.3
8.00
6.69
4.72
50.2
38.8
33.4
25.6
19.5
16.2
13.8
12.3
9.41
65.5
52.6
46.4
37.2
29.4
24.8
21.4
19.2
15.0
87.1
72.2
65.0
54.0
44.3
38.0
33.3
30.2
25.0
6.5
114
97.2
88.9
76.1
64.2
56.0
49.7
45.7
39.5
40
153
133
124
109
94.8
85.5
78.3
73.4
64.9
65
TABLE XV-F-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
20
0
10
0
0.0
10
10
30
30
20
40
40
20
50
50
10
60
60
6.5
70
70
4.0
80
80
2.5
90
90
0.65
100
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 76
SINGLE-USER LICENSE
ONLY,
COPYING
76
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
77
0.0
0.4
1.5
2.5
10
4.0
15
6.5
20
10
25
30
35
40
10
20
30
40
50
60
70
80
90
100
0.0
20
15
40
25
60
40
80
100
12.5
19.0
14.0
23.8
18.4
28.1
22.5
36.0
30.1
9.22
5.99
5.81
1.0
5.0
9.14
4.60
15.8
8.80
2.78
22.3
27.1
15.5
19.7
11.9
8.21
25.0
11.6
5.48
3.46
1.42
5.30
1.43
18.2
12.1
8.54
7.56
0.706
15.7
3.99
2.74
0.358
13.9
8.87
10.2
5.09
6.49
3.05
0.223
12.6
7.96
1.53
0.0643
10.0
6.12
3.02
4.28
1.80
2.54
2.32
1.12
0.223
0.357
0.571
0.0643
.4
10
6.5
2.5
4.0
p (in percent
nonconforming)
0.703
1.5
.4
4.50
SCHEME
PERFORMANCE
10.0
50.0
75.0
90.0
95.0
99.0
Pa
13.3
9.49
7.78
5.39
3.48
2.32
1.52
1.11
.564
1.5
4.0
6.5
10
15
20.7
14.8
12.2
8.43
5.53
3.98
3.01
2.51
1.77
26.3
19.7
16.6
12.3
8.63
6.45
5.00
4.18
2.95
31.4
24.2
20.9
16.0
12.2
10.1
8.64
7.69
5.88
41.0
32.9
29.0
23.2
18.3
15.5
13.4
12.0
9.49
54.4
45.1
40.6
33.8
27.7
23.7
20.8
18.9
15.5
2.5
71.4
60.8
55.6
47.6
40.1
35.0
31.1
28.6
24.6
25
95.6
83.4
77.4
67.9
59.2
53.4
48.9
45.9
40.3
40
TABLE XV-G-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 77
SINGLE-USER LICENSE
ONLY,
COPYING
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
SCHEME
PERFORMANCE
0
10
20
30
40
50
60
70
80
90
100
0.0
.25
10
4.0
15
6.5
20
10
25
30
15
35
40
45
25
50
55
60
65
0.445
1.72
2.84
3.68
5.59
25.0
10.0
5.0
1.0
0.229
90.0
0.893
0.143
95.0
50.0
0.0416
99.0
75.0
.25
Pa
21.0
24.7
27.0
14.5
17.8
19.9
10.0
12.9
14.8
7.70
10.3
12.1
5.30
7.56
9.14
3.34
4.77
5.79
31.6
17.6
11.7
5.49
3.52
2.17
24.1
15.4
10.0
6.52
7.74
4.15
2.55
1.46
18.7
13.7
8.76
5.62
3.23
1.93
0.983
15.8
12.6
7.92
5.03
2.70
1.59
0.733
12.5
10.4
6.33
3.86
1.87
1.09
0.386
8.01
10
6.5
2.5
4.0
p (in percent
nonconforming)
1.5
1.0
5.76
3.74
2.88
1.73
0.898
0.446
0.229
0.143
0.0416
.25
8.30
5.93
4.86
3.37
2.18
1.46
0.979
0.729
0.383
1.0
2.5
4.0
6.5
13.3
9.49
7.78
5.39
3.54
2.55
1.92
1.57
1.08
16.8
12.6
10.6
7.85
5.52
4.13
3.20
2.66
1.84
20.1
15.5
13.4
10.2
7.78
6.47
5.53
4.92
3.77
26.2
21.0
18.5
14.9
11.7
9.90
8.57
7.69
6.14
1.5
34.8
28.9
26.0
21.6
17.7
15.2
13.3
12.1
10.0
10
45.7
38.9
35.6
30.4
25.7
22.4
19.9
18.3
15.4
15
TABLE XV-H-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
25
61.2
53.4
49.5
43.5
37.9
34.2
31.3
29.4
25.6
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 78
SINGLE-USER LICENSE
ONLY,
COPYING
78
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
79
2
.65
1.0
1.5
SCHEME
PERFORMANCE
6.5
10
15
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
1.10
1.83
2.37
25.0
10.0
5.0
0.571
50.0
3.62
17.3
20.5
12.7
15.6
9.41
12.0
7.66
10.1
5.79
3.74
8.01
15.7
6.52
5.19
13.3
9.15
11.3
6.32
8.16
4.85
3.34
2.20
1.39
4.77
11.0
7.31
4.85
3.44
3.08
9.58
1.59
2.14
8.48
5.43
6.23
3.49
4.06
2.01
2.59
1.21
0.617
75.0
7.74
4.89
3.12
0.928
0.144
0.282
90.0
6.49
3.88
2.39
1.16
1.01
0.458
0.0896
95.0
1.68
0.715
0.240
0.0260
99.0
6.5
4.0
1.5
2.5
p (in percent
nonconforming)
1.0
.65
.15
26.6
23.2
21.4
18.6
16.0
14.2
12.7
11.8
10.2
10
3.69
2.40
1.84
1.11
0.573
0.282
0.144
0.0897
0.0260
.15
5.31
3.79
3.11
2.16
1.39
0.928
0.615
0.457
0.239
.65
2.5
4.0
8.30
5.93
4.86
3.37
2.21
1.59
1.20
1.00
0.710
10.5
7.87
6.65
4.90
3.45
2.58
2.00
1.66
1.15
12.6
9.69
8.35
6.40
4.86
4.04
3.46
3.08
2.35
16.4
13.1
11.6
9.29
7.34
6.19
5.35
4.80
3.80
1.0
21.8
18.0
16.2
13.5
11.1
9.50
8.32
7.56
6.35
6.5
28.5
24.3
22.2
19.0
16.1
14.0
12.4
11.4
9.87
10
15
38.2
33.4
30.9
27.2
23.7
21.4
19.6
18.4
15.9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
4.0
TABLE XV-J-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
1.0
2.5
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
0.0 1
.15
Pa
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 79
SINGLE-USER LICENSE
ONLY,
COPYING
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
SCHEME
PERFORMANCE
2.0
3.0
4.0
5.0
6.0
7.0
0.0
1.5 2.5
10
4.0
6.5
15
10
20
25
.10
0.0167
0.0573
0.0916
0.178
0.359
0.694
1.15
1.50
2.31
Pa
99.0
95.0
90.0
75.0
50.0
25.0
10.0
5.0
1.0
6.08
7.08
8.65
10.4
11.5
3.96
4.70
5.94
7.42
8.41
2.59
3.11
4.10
5.34
6.20
1.65
2.21
3.14
4.26
5.04
1.02
1.42
2.16
3.11
3.79
0.586
0.873
1.35
1.94
2.37
6.73
5.33
3.43
2.21
1.28
0.771
5.31
4.84
3.07
1.97
1.06
0.643
0.292
0.392
3.32
4.01
2.43
1.49
0.738
6.5
10
8.04
10.5
13.9
18.3
15.6
14.2
12.2
10.3
8.96
7.96
7.32
6.34
24.5
21.4
19.8
17.4
15.2
13.7
12.5
11.7
10.3
4.0
0.153
2.5
1.0
.65
.40
1.5
TABLE XV-K-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
1.0
0
0.0
10
30
30
10
40
40
20
50
50
20
60
60
1.0
70
70
0.65
80
80
0.40
90
90
0.10
100
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 80
SINGLE-USER LICENSE
ONLY,
COPYING
80
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
2.0
0.65
3.0
1.0
4.0
1.5
5.0
2.5
6.0
7.0
8.0
4.0
9.0
10.0
11.0
6.5
12.0
13.0
14.0
15.0
1.5
2.5
7.22
8.71
1.51
0.951
5.0
1.0
6.55
5.26
3.88
3.15
2.37
1.23
0.731
10.0
5.02
4.64
3.34
2.66
1.94
0.856
0.441
4.20
6.50
3.72
2.56
1.96
0.885
1.35
0.554
0.228
25.0
50.0
3.32
4.43
5.40
2.94
1.95
1.38
2.11
3.80
2.48
75.0
1.46
3.33
2.14
1.38
1.62
0.800
1.03
0.482
3.02
1.92
1.23
0.669
0.637
2.50
1.50
0.941
0.472
0.284
0.402
0.0957
0.183
0.0358
90.0
4.0
6.5
11.4
9.72
8.89
7.61
6.42
5.60
4.97
4.57
3.95
15.3
13.3
12.4
10.9
9.48
8.55
7.83
7.34
6.49
1.0
0.0104
.65
.40
.25
.065
0.246
95.0
99.0
Pa
TABLE XV-L-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
1.0
0.40
0.369
0.0
.065 0.25
0.0574
81
0.112
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
16.0
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 81
SINGLE-USER LICENSE
ONLY,
COPYING
SCHEME
PERFORMANCE
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
SCHEME
PERFORMANCE
0
10
20
30
40
50
60
70
80
90
100
0.0
1.0
2.0
.40 .65
1.0
3.0
1.5
4.0
5.0
2.5
6.0
7.0
4.0
8.0
9.0
10.0
0.0711
0.278
0.460
0.599
0.922
25.0
10.0
5.0
1.0
0.0364
90.0
0.143
0.0228
95.0
50.0
0.00665
99.0
75.0
.04
Pa
2.41
2.81
3.43
4.13
4.58
1.57
1.86
2.36
2.94
3.34
1.03
1.23
1.63
2.12
2.46
0.655
0.876
1.25
1.69
2.00
0.404
0.562
0.856
1.23
1.51
0.233
0.349
0.539
0.778
0.949
2.67
2.11
1.36
0.878
0.508
0.306
2.11
1.92
1.22
0.781
0.425
0.255
0.113
0.154
1.33
1.57
0.967
0.598
0.300
2.5
4.0
3.19
4.16
5.53
7.25
6.17
5.64
4.83
4.08
3.56
3.16
2.90
2.50
9.71
8.47
7.86
6.90
6.02
5.43
4.97
4.66
4.08
1.5
0.0574
1.0
.40
.25
.15
.65
TABLE XV-M-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 82
SINGLE-USER LICENSE
ONLY,
COPYING
82
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
0.0
0.5
.025 .10
.15
1.0
.25
.40
1.5
.65
2.0
1.0
2.5
3.0
1.5
3.5
4.0
4.5
2.5
5.0
5.5
6.0
6.5
.65
1.0
0.830
1.33
1.68
2.01
2.62
3.48
2.89
0.374
5.0
1.0
2.10
0.778
0.486
0.288
10.0
1.55
1.85
1.34
1.06
0.539
0.337
0.174
1.26
2.60
1.49
1.02
0.785
0.354
0.218
0.0898
25.0
50.0
0.949
1.77
2.16
1.17
0.778
0.552
0.593
1.52
0.990
0.413
75.0
0.576
1.33
0.857
0.553
0.647
0.320
0.192
0.255
0.0979
1.21
0.266
0.146
1.00
0.613
0.769
0.377
0.492
0.184
0.108
0.157
0.0383
0.0729
0.00416
90.0
1.5
2.5
4.57
3.89
3.56
3.04
2.57
2.24
1.99
1.83
1.54
6.12
5.34
4.95
4.35
3.79
3.42
3.13
2.94
2.56
.40
0.0143
.25
.15
.10
.025
0.0446
95.0
99.0
Pa
TABLE XV-N-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
0.0229
83
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 83
SINGLE-USER LICENSE
ONLY,
COPYING
SCHEME
PERFORMANCE
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
SCHEME
PERFORMANCE
0
10
20
30
40
50
60
70
80
90
100
0.0
0.5
.015 .10
.25
.065 .15
1.0
.40
1.5
.65
2.0
1.0
2.5
1.5
3.0
3.5
4.0
0.00901
0.0144
0.0283
0.0573
0.111
0.184
0.240
0.369
90.0
75.0
50.0
25.0
10.0
5.0
1.0
0.00263
99.0
95.0
.015
Pa
0.950
1.11
1.35
1.62
1.80
0.619
0.734
0.929
1.16
1.31
0.404
0.486
0.640
0.835
0.969
0.258
0.345
0.490
0.665
0.787
0.159
0.221
0.337
0.486
0.593
0.0928
0.139
0.216
0.311
0.379
1.05
0.832
0.535
0.346
0.200
0.121
0.830
0.757
0.480
0.308
0.166
0.101
0.0457
0.0616
0.531
0.636
0.381
0.236
0.116
1.0
1.5
1.26
1.64
2.18
2.85
2.43
2.22
1.90
1.61
1.40
1.24
1.14
0.989
3.82
3.34
3.09
2.72
2.37
2.14
1.96
1.84
1.59
.65
0.0240
.40
.15
.10
.065
.25
TABLE XV-P-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 84
SINGLE-USER LICENSE
ONLY,
COPYING
84
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
85
10
20
30
40
50
60
70
80
90
100
0.15
0.25
0.40
0.65
1.0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6
.010
.065 0.10
.040
.25
.40
0.332
0.531
0.379
0.673
0.504
0.804
0.620
1.05
0.841
1.39
1.15
0.150
1.0
5.0
0.237
1.04
0.742
0.534
0.426
0.311
0.194
0.115
10.0
25.0
0.231
0.708
0.865
0.594
0.410
0.314
0.216
0.311
0.221
0.142
0.608
0.396
0.165
0.0586
0.0873
0.533
0.343
0.221
0.259
0.128
0.0771
0.102
0.0392
0.00915
0.0178
0.135
0.484
0.106
0.0643
0.0694
0.401
0.243
0.307
0.149
0.197
0.0738
0.0455
0.0153
0.0292
0.00573
50.0
.65
1.0
1.83
1.56
1.42
1.22
1.03
0.896
0.796
0.732
0.634
2.45
2.14
1.98
1.74
1.52
1.37
1.25
1.17
1.03
.15
0.00167
.10
.065
.04
.01
0.0358
SCHEME
PERFORMANCE
0.470
75.0
90.0
95.0
99.0
Pa
TABLE XV-Q-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 85
SINGLE-USER LICENSE
ONLY,
COPYING
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
SCHEME
PERFORMANCE
0.0
0.1
.025
.040
0.2
.065
0.3
0.10
0.4
0.15
0.5
0.25
0.6
0.7
0.8
0.40
0.9
1.0
1.1
0.65
1.2
1.3
1.4
1.5
.025
0.00957
0.0183
0.0246
0.0369
0.0554
0.0856
0.123
0.151
0.211
Pa
99.0
95.0
90.0
75.0
50.0
25.0
10.0
5.0
1.0
0.560
0.642
0.761
0.889
0.972
0.380
0.443
0.540
0.650
0.722
0.248
0.294
0.372
0.464
0.526
0.162
0.195
0.256
0.334
0.388
0.103
0.138
0.196
0.266
0.315
0.0637
0.0885
0.135
0.194
0.237
0.502
0.497
0.333
0.214
0.138
0.0800
0.420
0.457
0.302
0.192
0.123
0.0669
0.0402
0.0482
0.332
0.395
0.250
0.150
0.0941
.65
0.656
0.871
1.14
1.53
1.33
1.24
1.09
0.948
0.855
0.783
0.734
0.649
.40
0.0284
.25
.10
.065
.040
.15
TABLE XV-R-1 TABULATED VALUES FOR OPERATING CHARACTERISTIC CURVES FOR ANSI/ASQ Z1.4 SCHEME PERFORMANCE
Note: Figures on curves are Acceptance Quality Limits (AQLs) for normal inspection.
Quality of submitted product (p, in percent nonconforming for AQLs 10; in nonconformities per hundred units for AQLs >10)
10
20
30
40
50
60
70
80
90
100
PERCENT OF LOTS
EXPECTED TO BE
ACCEPTED (Pa)
(Curves for double and multiple sampling are matched as closely as practicable)
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 86
SINGLE-USER LICENSE
ONLY,
COPYING
86
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 87
SINGLE-USER LICENSE
ONLY,
COPYING
Term
87
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
01.Z1.4(001-088).qxd:01.Z1.4(001-088).qxd
10/8/13
9:46 AM
Page 88
SINGLE-USER LICENSE
ONLY,
COPYING
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014
T964E
Printed in the United States of America
Licensed to Laboratorios Grossman S.A/Gerardo Gutierrez by ASQ (www.asq.org) Order# 7000520061 Downloaded: 4/3/2014