Escolar Documentos
Profissional Documentos
Cultura Documentos
MaINSSIDER
InSSIDer is modified to show the signal strength of the AP.
Here are the steps we followed to do the survey
1. Run the insider.exe file.
This will open the following GUI, this is Landing page.
Inssider
Page 1
Inssider
3. Select the Survey Tab:
Inssider
Page 2
Inssider
Page 3
Inssider
Once you are done with placing all the APs in the apt location,
click on Done Button. This does the following 2 tasks:
a. Creates a folder under #inSSIDer#/Survey/FloorPlanName.
Example if inSSIDer is running under C:\inssider and you
have selected floorplan1.jpg as the floorplan,
C:\inssider\Survey\floorplan folder gets created
dynamically and the floor plan image is copied to this
folder.
Inssider
Page 4
Inssider
Inssider
Page 5
Inssider
After entering the IP Address click on Connect button, if the
server is not running then anerror message will be shown.
Inssider
Page 6
Inssider
Select the AP for which you want to do the survey, If the user
clicks on floor without selecting the AP from the combo box, the
message Please Select the AP will be displayed.
Inssider
Page 7
Inssider
Below image shows the data collected from STA and written to
the files created dynamically.
Inssider
Page 8
Inssider
Inssider
Page 9
Inssider
Inssider
Page 10
Inssider
Inssider
Page 11