Escolar Documentos
Profissional Documentos
Cultura Documentos
Harken is pleased to present this new addition to our standard catalog. The pages contain block, traveler, winch, and hydraulic systems
specifically tailored for the larger yachts that are under construction or that are already sailing.
Harkens first introduction to the world of big boats came in 1977 when working with the 12 meters (large boats for the time) competing in
the 1980 Americas Cup. It was only four years from then that we equipped our first megayacht. Over the years, yachts have gotten bigger
and bigger, with Harken developing ever- stronger, high-performance equipment to handle the increasing loads on hulls and rigging.
During the 90s, Harken supplied the Whitbread boats, the French ocean-going trimarans, most of the new maxi racing yachts, and Americas
Cup yachts. We also expanded our winch range, and were able to offer full winch systems to yachts 100 and over. Roll the time line forward
20-plus years and the rumor mill is in overdrive about people looking at yachts with winch loads requiring up to 70 tons of pull. To meet
these new challenges, Harken constructed a full testing facility for 70 ton winches at its factory. Winches using hydraulic or electric motors
were built and have successfully met the 70-ton pull requirements! We are prepared and ready to go!
At Harken, we are very fortunate to have so many loyal, long-time customers that consistently lay down the gauntlet for us with new ideas
and opportunities. Were proud to have had the team and support we needed to meet these challenges.
Best Regards,
Corinne Rich
Custom Sales Manager
4 Megayacht Blocks
8 TTR2 Blocks
10 Wooden Blocks
20 Traveler Systems
30 Battcar Systems
34 Hydraulic Furling
38 Winches
48 Hydraulic Cylinders
Megayacht
BLOCKS
These powerful performers are sculpted and beautifully finished to
complement the aesthetics of the most elegant yachts. Offered in
strong, lightweight aluminum and lustrous stainless steel. Available
styles include single swivels, stand-ups, teardrops, flying runners,
mastbase leads, and single or double footblocks.
S/Y Christopher, 46 m Ketch, Builder: Pendennis Shipyard, Designer: Ron Holland, PM: Duane McPhail Tim Wright
Corrosion-resistant, maintaining
beauty and strength over time
Hardcoat-anodized, PTFE-coated aluminum, titanium,
or mirror-polished stainless steel finishes.
Torlon is a registered trademark of Solvay Advanced Polymers.
BLOCKS
HC9077
HC9082
HC9087
HC9092
C9247
Stainless Steel
Part
No.
Description
HC9078
HC9083
HC9088
HC9093
C9291
Sheave
mm
HC9076
HC9081
HC9086
HC9091
HC10102
Weight
kg
Max line
mm
C12242
C12243
C12244
C12245
C12246
Maximum
working load
kg
Breaking
load
kg
100 mm
HC9076
HC9077
HC12712
HC9078
HC9080
HC9079
C12242
Stand-up block
Swivel block
Single footblock/compact
Teardrop
Single footblock
Double footblock
Stud mastbase block
100
100
100
100
100
100
100
1.96
1.76
2.35
1.35
2.37
4.01
2.93
16
16
16
16
16
16
16
5000
5000
5000
5000
5000
3333
5000
10000
10000
10000
10000
10000
6666
10000
Stand-up block
Swivel block
Teardrop
Single footblock/compact
Single footblock
Double footblock
Stud mastbase block
125
125
125
125
125
125
125
3.23
2.76
2.11
4.08
4.20
7.10
4.11
19
19
19
19
19
19
19
7000
7000
7000
7000
7000
4620
7000
14000
14000
14000
14000
14000
9240
14000
150
6.27
25
150
5.12
25
150
4.20
25
150
3.68
25
150
6.73
25
Contact Harken for custom sizes.
10000
8800
10000
10000
10000
20000
17600
20000
20000
20000
150 mm
HC9086
Stand-up block
HC9087
Swivel block*
HC9598
Single for removable padeye
HC9088
Teardrop
HC12714 Single footblock/compact
*Maximum working load limited by shackle.
HC12712
HC12713
HC12714
HC12715
HC12716
Sheave
mm
Weight
kg
Max line
mm
Maximum
working load
kg
Breaking
load
kg
Single footblock
Double footblock
Stand-up block/U-bolt
Stud mastbase block
150
150
150
150
7.67
12.74
6.02
6.42
25
25
25
25
10000
6666
10000
10000
20000
13332
20000
20000
Stand-up block
Swivel block*
Single for removable padeye
Teardrop
Single footblock/compact
Single footblock
Double footblock
Stud mastbase block
175
175
175
175
175
175
175
175
8.90
8.59
6.40
5.45
9.11
9.76
16.50
9.47
25
25
25
25
25
25
25
25
15000
12800
15000
15000
15000
15000
10000
15000
30000
25600
30000
30000
30000
30000
20000
30000
Single footblock
Swivel block
Swivel block/toggle
Teardrop
Single footblock/compact
Stud mastbase block
200
200
200
200
200
200
12.40
10.32
12.30
8.44
15.90
23.67
30
30
30
30
30
30
24000
23000
23000
23000
24000
24000
48000
46000
46000
46000
48000
48000
Stand-up block
300
40.49
50
60000
120000
Description
125 mm
HC9081
HC9082
HC9083
HC12713
HC9085
HC9084
C12243
Part
No.
NEW
HC9080
HC9085
HC9090
HC9095
HC10667
HC9079
HC9084
HC9089
HC9094
NEW
HC9090
HC9089
HC10102
C12244
175 mm
HC9091
HC9092
HC9316
HC9093
HC12715
HC9095
HC9094
C12245
200 mm
C10667
C9247
C10123
C9291
C12716
C12246
300 mm
C10122
Aluminum Megayacht
BLOCKS
Aluminum
Part
No.
HC8667
HC8640
HC8633
HC8631
C9225
HC8670
HC8657
HC8639
HC8635
C9367
HC8673
HC8674
HC8675
HC10088
HC8932
HC9222
HC9289
mm
Weight
kg
Max line
mm
Maximum
working load
kg
Breaking
load
kg
Stand-up block
Swivel block
Teardrop
Single footblock/compact
Single footblock
Double footblock
Stud mastbase block
100
100
100
100
100
100
100
1.4
1.2
0.87
1.61
1.38
2.3
2.51
16
16
16
16
16
16
16
5000
5000
5000
5000
5000
3333
5000
10000
10000
10000
10000
10000
6666
10000
Stand-up block
Swivel block
Teardrop
Single footblock/compact
Single footblock
Double footblock
Stud mastbase block
Flying runner block**
125
125
125
125
125
125
125
125
2.34
1.87
1.35
2.68
2.39
4.02
3.36
1.42
19
19
19
19
19
19
19
19
7000
7000
7000
7000
7000
4620
7000
7000
14000
14000
14000
14000
14000
9240
14000
14000
Stand-up block
Swivel block*
Single for removable padeye
Teardrop
Single footblock/compact
Single footblock
Double footblock
Stand-up block/U-bolt
Stud mastbase
Flying runner block**
150
150
150
150
150
150
150
150
150
150
4.67
3.51
2.60
2.38
4.21
4.27
7.21
4.44
5.12
2.32
25
25
25
25
25
25
25
25
25
25
10000
8800
10000
10000
10000
10000
6666
10000
10000
10000
20000
17600
20000
20000
20000
20000
13332
20000
20000
20000
Description
Also available in
stainless steel
100 mm
HC8673
HC8670
HC8667
HC12587
HC8928
HC8671
C12236
NEW
150 mm
HC8675
HC8639
HC9222
HC8633
HC12710
HC8930
HC8661
HC10088
C12238
C9333
Part
No.
Description
NEW
C12685
C9333
C9645
NEW
HC12587
HC12709
HC12710
HC12711
C12115
125 mm
HC8674
HC8657
HC8640
HC12709
HC8929
HC8663
C12237
C12685
HC8928
HC8929
HC8930
HC8931
HC8671
HC8663
HC8661
HC8636
C12236
C12237
C12238
C12239
C12240
Sheave
mm
Weight
kg
Max line
mm
Maximum
working load
kg
Breaking
load
kg
175
175
175
175
175
175
175
175
175
6.36
6.05
3.90
3.3
5.99
6.34
9.69
8.03
2.32
25
25
25
25
25
25
25
25
25
15000
12800
15000
15000
15000
15000
10000
15000
15000
30000
25600
30000
30000
30000
30000
20000
30000
20000
12.61
7.95
6.44
8.93
27.96
10.74
30
30
30
30
30
30
23000
23000
23000
23000
15000
23000
46000
46000
46000
46000
30000
46000
175 mm
HC8932
HC8635
HC9289
HC8631
HC12711
HC8931
HC8636
C12239
C9645
Stand-up block
Swivel block*
Single for removable padeye
Teardrop block
Single footblock/compact
Single footblock
Double footblock
Stud mastbase block
Flying runner block
200 mm
C9363
Stand-up block
200
C9367
Swivel block
200
C9225
Teardrop block
200
C12115 Single footblock/compact
200
C12332 Double footblock
200
C12240 Stud mastbase block
200
25 mm pin diameter and 25 mm max terminal width.
TTR2
BLOCKS
Harken TTR2 Air blocks rank #1 in efficiency, increasing trimming
speed by harnessing power other blocks lose to friction. Our
versatile soft-attach blocks can be used anywhere a lightweight,
high-load bearing block is needed: spinnaker, mainsheet, traveler
control systems, flying runners. Available in single, wide, and
footblock configurations; 1.5 18 metric ton working loads.
C10670
C10245
C10125
C10150
C10193
C10975
C12772
C10555
C10558
NEW
C10545
C11543
C10226
C10151
C10194
S/Y Magic Carpet3, Wally 100, Builder: Wally Yachts, Designer: Reichel/Pugh, PM: Bob Wiley Ingrid Abery
Options
Wide or narrow sheaves; wide sheaves
accommodate two sheets.
Soft attachments can be configured as becket
or fiddle blocks, and lash to the attachment
point, bypassing the load on the top of the block.
Opening footblocks allow for easy sheet changes.
Sheave
Length
Weight
Part
No.
Description
mm
mm
kg
C10670 1.5T single
47
68
.106
C10245 3.0T single
56
79
.127
C10125 5.0T single
62
86
.203
C10226 5.0T wide single
62
96
.282
C10555 5.0T footblock
62
90
.335
C10556 5.0T wide footblock
62
101
.431
C10150 6.5T single
82
113
.413
C10151 6.5T wide single
87
135
.740
C10545 6.5T opening footblock
100
156
3.480
C10557 6.5T footblock
82
112
.811
C10558 6.5T wide footblock
87
130
1.201
C10193 8.0T single
104
142
.768
C10194 8.0T wide single
110
157
1.121
C10559 8.0T footblock
104
144
1.281
C11543 8T opening wide footblock
110
165
4.1
C10975 10T single
120
162
1.140
C12772 18T single
200
242
3.0
Loops not included. Stand-alone sheaves are available. Contact Harken for more information.
Max line
mm
9
10
11
2 x 14
11
2 x 14
16
2 x 18
26
16
2 x 18
20
2 x 20
20
20
20
26
Maximum
working load
kg
1500
3000
5000
5000
5000
5000
6500
6500
6500
6500
6500
8000
8000
8000
8000
10000
18000
Breaking
load
kg
3000
6000
10000
10000
10000
10000
13000
13000
13000
13000
13000
16000
16000
16000
16000
20000
36000
Classic Wooden
BLOCKS
S/Y Doa Francisca, Designer: Javier Soto Acebal, Builder: Astillero Buquebus Matt Bridge
S/Y Doa Francisca, Designer: Javier Soto Acebal, Builder: Astillero Buquebus
Options:
60 to 150 mm; fit rope from 12 to 22 mm.
Bronze medallion for club or boat name.
11
Classic Wooden
BLOCKS
NEW
NEW
3305
3310
3315
3320
3325
3307
3311
3317
3322
3327
Description
Weight
kg
Max Line
mm
Max Working
Load
kg
Breaking
Load
kg
62 mm
3305
3306
3307
3308
3309
.58
.68
.65
.70
.63
12
12
12
12
12
1700
1150
1700
1700
1700
3400
2300
3400
3400
3400
.99
1.05
1.20
1.15
1.10
13
13
13
13
13
2900
2200
2900
2900
2900
5800
4400
5800
5800
5800
1.52
1.60
1.90
1.80
1.65
15
15
15
15
15
5500
2850
5500
5500
5500
11000
5700
11000
11000
11000
96 mm
3315
3316
3317
3318
3319
12
NEW
3308
3313
3318
3323
3328
Part
No.
3309
3314
3319
3324
3329
Weight
kg
Max Line
mm
Max Working
Load
kg
Breaking
Load
kg
2.55
2.65
3.00
2.65
2.73
17
17
17
17
17
8100
3900
8100
8100
8100
16200
7800
16200
16200
16200
3.67
3.92
4.56
4.00
3.82
22
22
22
22
22
10200
4500
10200
10200
10200
20400
9000
20400
20400
20400
Description
101 mm
76 mm
3310
3311
3312
3313
3314
NEW
NEW
3306
3311
3316
3321
3326
3320
3321
3322
3323
3324
127 mm
3325
3326
3327
3328
3329
Classic Wooden
BLOCKS
NEW
NEW
3330
3335
3340
3345
3350
Description
Weight
kg
Max Line
mm
3332
3337
3342
3347
3352
Max Working
Load
kg
Breaking
Load
kg
62 mm
3330
3331
3332
3333
3334
NEW
3333
3338
3343
3348
3353
Part
No.
3334
3339
3344
3349
3354
Weight
kg
Max Line
mm
Max Working
Load
kg
Breaking
Load
kg
2.10
2.20
2.55
2.20
2.28
17
17
17
17
17
8100
3900
8100
8100
8100
16200
7800
16200
16200
16200
3.01
3.26
3.90
3.34
3.16
22
22
22
22
22
10200
4500
10200
10200
10200
20400
9000
20400
20400
20400
Description
101 mm
Single fixed head
Single swivel
Single with becket
Double fixed head
Single foot
.45
.55
.52
.57
.50
12
12
12
12
12
1700
1150
1700
1700
1700
3400
2300
3400
3400
3400
.79
.85
1.00
.95
.90
13
13
13
13
13
2900
2200
2900
2900
2900
5800
4400
5800
5800
5800
1.18
1.25
1.55
1.45
1.30
15
15
15
15
15
5500
2850
5500
5500
5500
11000
5700
11000
11000
11000
76 mm
3335
3336
3337
3338
3339
NEW
NEW
3331
3336
3341
3346
3351
3345
3346
3347
3348
3349
127 mm
3350
3351
3352
3353
3354
96 mm
3340
3341
3342
3343
3344
13
High-Load
Snatch
BLOCKS
These versatile hard-working blocks are a must in every yachts inventory.
Their opening sideplates and simple operation allow crew to quickly fasten
them wherever needed. Harken Snatch blocks excel in static applications that
require small adjustments: tack-line leads, barberhaulers, halyard leads.
Bella Mente, Judel/Vrolijk & Co., New England Boatworks Billy Black photo
S/Y Freya, Swan 90, Builder: Oy Nautor, Designer: German Frers Ingrid Abery
Part
No.
3299
3300
3301
3302
3303
Description
2.3T snatch
5T snatch
8T snatch
12T snatch
15T snatch
Sheave
mm
38.5
56
75
100
125
Length
mm
60
86
114
148
184
Weight*
g
107
245
575
1350
2146
Max line
mm
11
16
18
30
26
Maximum
working load
kg
2300
5000
8000
12000
15000
Breaking
load
kg
4600
9800
16400
24000
30000
Available
January 2016
15
HIGH-LOAD
PADEYES
Our padeyes are mirror-polished, high-strength stainless steel to
complement design details in both modern and classic yachts.
Developed with meticulous attention to detail, our fixed and
removable padeyes are perfect for mounting blocks, or as deflection
points for sheets and control lines. Custom sizes available.
Gazelle, Gunboat 66, Morrelli and Melvin, Gunboat (Pty) Ltd. Michael Eudenbach
In-Deck Loops
To attach high-load soft-attachment blocks such
as Snatch, Loop, TTR, and Black Magic blocks.
Recessed in decks for smooth, clean look.
Low profile, compact design.
S/Y Nilaya, 112 Sloop, Builder: Baltic Yachts, Designer: Reichel/Pugh, PM: Nigel Ingram at MCM Guido Cantini
U-Bolts
Handles high loads as bail transfers loads to deck.
Small mounting footprint allows
fitting into small areas.
Works with both soft and hard
attachmentsloop, lashing, shackles.
Removable
Bases swivel to align to load to prevent
loss in maximum working load.
Tops unscrew from recessed
cups to reduce deck clutter.
Removable toggle
U-bolt
Removable bail
In-deck loop
17
PADEYES
C9064
C8997
C10267
In-deck loop
18
C6779
C9374
C9761
Bolt-down
bail padeye
U-Bolt padeye
C9584
627
648
629
C11173
Removable soft-attach
C8905
C7359
C11003
C9153
C9057
C10063
HC8207
HC7327
HC7388
HC7224
HC7340
Removable bail padeye
with deck cup
Removable padeye,
to suit bail padeyes
HC7340
HC7389
HC7403
PADEYES
Bail padeye
Removable Padeyes
Part
No.
HC7340
C10768
HC7389
HC7403
C11177
C9512
C9775
C9511
C9760
C9240
Description
Bolt-Down deck cup
Stud deck cup
Bolt-Down deck cup
Bolt-Down deck cup
Stud deck cup
Stud deck cup
Bolt-Down deck cup
Stud deck cup
Stud deck cup
Bolt-Down deck cup
Above deck
mm
57
83
83
108
90
95
139
100
114
165
Weight
deck cup
kg
0.127
1.275
0.362
1.179
3.62
1.524
1.8
2.02
4.17
2.52
Fasteners
4 x M6
1 x M39
4 x M10
4 x M12
1 x M60
1 x M48
6 x M16
1 x M56
1 x M76
6 x M20
Use
with top
HC8207, HC7327
HC7388
HC7388
HC7224, C6779, C9584
C11173, C11334
C6779, HC7224
C9374, C11003
C9374, C11003
C9761
C9761
Stud deck
cup
Bolt-down
deck cup
Fixed Padeyes
Removable Tops
Above deck
Part
No.
Description
mm
HC8207 Small padeye bail non swiveling
57
HC7327 Swivel bolt attach
57
HC7388 Swivel bolt attach
83
HC7224 Swivel bolt attach
108
C6779 Toggle Assy
108
C9584 Soft attach bail w/lock
108
C11173 Soft attach swivel
90
C11334 Soft attach swivel jaw
90
C9374 Toggle Assy
100
C11003 Soft attach
100
C9761 Toggle assy
111
DO NOT use Harken equipment for human suspension.
Maximum
working load
kg
2000
5000
5358
9070
10000
12000
15032
15032
25053
23048
Weight
kg
0.201
0.272
0.635
0.807
1.553
0.544
1.589
1.82
2.44
1.55
5.01
Maximum
working load
kg
2000
2270
5358
9070
9091
9019
10021
10021
15032
15032
23048
Use with
deck cup
HC7340
HC7340
C10768, HC7389
HC7403, C9512
HC7403, C9512
HC7403
C11177
C11177
C9775, C9511
C9775, C9511
C9760, C9240
Use
with accessory
627 padeye
648 padeye
629 padeye
150 mm megayacht block
13 mm loop
17 mm loop
20 mm loop
175 mm megayacht block
19 mm loop
200 mm megayacht block
Part
No.
627
C9064
C9153
648
C9057
629
C8997
C10063
C8905
C7359
C10267
Description
Small round
5T In-deck loop
5T U-bolt
Medium round
9T U-bolt
Large round
12T In-deck loop
12T U-bolt
Runner tail
Toggle base
23T In-deck loop
Above deck
mm
57
85
76
95
106
140
200
167
Weight
kg
.118
1.18
0.50
.312
1.02
.652
2.50
2.22
1.68
4.97
5.74
19
Traveler
SYSTEMS
Harken traveler systems deliver increased performance and make handling the
large mainsail systems found on Mini-Maxi to Megayachts much easier. These
travelers can be operated with winches for fine adjustment when racing, and by
hydraulic systems for megayachts. Custom configurations for vertical or horizontal
curved track are easily achieved with Harkens advanced bearing systems.
C10937
C10642
Rambler 88, Designer: Juan Kouyoumdjian, Builder: New England Boatworks, PM: Mick Harvey George Bekris
Mainsheet winch
2:1
ma
insh
1:3
r
trav everse
eler
p
con urcha
se
trol
eet
Dou
Trav
eler
ble
pul
l cy
car
lind
er
21
Mainsheet Travelers
CARS
Cars
Part
No.
C9701
C10747
Description
C10976
Sheave
Length
mm
Width
mm
Height
mm
Weight
kg
Maximum
working load
kg
Breaking
load
kg
100
125
406
406
111
111
243
278
5.44
6.27
4808
5670
9616
11340
137
191
305
203
292
384
411
514
617
678
77
77
77
82
77
77
77
77
84
57
138
67
77
141
119
142
160
209
.827
6.62
.957
1.65
2.72
3.22
4.5
5.47
10.6
3600
6804
4500
6500
6500
9000
10000
12500
13400
7200
13608
9000
13000
13000
1800
20000
25000
26800
150
150
125
718
686
686
686
132
132
132
132
327
138
327
295
15.24
11.85
14.97
15.86
9600
12000
13636
13636
19200
24000
27272
27272
413
515
515
683
685
108
108
108
108
157
165
165
165
241
287
7.46
8.55
11.5
17.55
18.96
12000
15000
15000
22000
20000
24040
30000
30000
44000
40000
C9563
42 mm Mini-Maxi Traveler
C5231
C5280
C11563
64 mm Maxi Traveler
C8583
C10976
C8441
C10937
22
C10642
Mainsheet Travelers
CARS
C8583
C8955
C9642
C10413
C10937
C5160
Ends
Part
No.
Description
Length
mm
Width
mm
Height
mm
Weight
kg
Maximum
working load
kg
Breaking
load
kg
90
70
31.75
56.5
11
29.5
0.17
0.4
2500
3800
5000
7600
121
98
133
171.5
108
95
95
95
95
95
51
64
65
94
47.4
0.8
0.73
1.07
3.95
1.35
4300
3000
8618
9072
4800
8600
6000
17236
18144
9600
108
79
95
89
47.4
44.7
1.35
0.544
4800
3600
9600
7200
C8378
C11183
64 mm Maxi Ends
662
664
C5160
C7932
C11183
Endstop
Pinstop
Double pinstop
Endstop with 629 padeye
Low profile endstop
Track
42 mm Mini-Maxi
42 mm Mini-Maxi CRX
64 mm Maxi
62 mm Mega CRX
Typical Fastener
Spacing (mm)
75
75
100
Fastener
Size (FH)
M10
M10
M12
Pinstop Hole
Spacing (mm)
37.5
37.5
37.5
Weight per
Meter (kg)
1.54
1.36
2.99
100
M12
37.5
3.12
23
SYSTEMS
Whether you prefer a traditional fore and aft track layout or the
athwartship track systems currently favored by racers, performance
matters! Low-friction bearings allow cars to be compact and lightweight.
-deck
Throughcar
r
fo
d
a
le
r
adjuste
ar
ad c
Genoa le
nsioner
-deck te
Throughoa sheeet
for gen
r
r cylinde
ste
Car adju
r
winch fo
Captive heet
s
a
geno
S/Y Elfie, Builder: Royal Huisman, Designer: Andre Hoek, PM: Allan Prior Ingrid Abery
wn
p/do
inch
To w g block U
n
loati
2:1 F
1:3 In/
rol
cont
n
w
p/do
out co
ntrol
1:2 U
25
High-Performance
Fore and Aft
CARS
Car bodies available with
multiple attachment options
C9297
C7513
Description
C7082
Sheave
mm
Length
mm
Width
mm
Height
mm
Weight
kg
Maximum
working load
kg
Breaking
load
kg
75
75
254
254
59.5
59.5
143.4
143.4
1.61
1.68
6000*
6000*
12000
12000
C10232
C9743
75
75
254
254
59.5
59.5
143.4
143.4
1.74
1.57
6000*
6000*
12000
12000
100
150
150
305
305
356
88
89.5
75
173
308
271
3.91
10.7
6.39
9000*
9000
9000
18000
18000
18000
57
56
100
152.4
128.59
190.5
62.62
65
59.92
55.16
102.8
63.5
57
41.71
61.61
49.25
28.55
33
0.590
0.553
1.247
0.249
0.227
902
1818
3409
960
1804
3636
6818
1920
57
75
75
57
95.5
160.25
158.8
143.25
112.5
92.07
97.9
130.15
67.41
77.6
71.1
67.4
42.98
67.41
96.52
67.4
63.4
69.14
102.9
83.8
22.2
68.11
79.25
55
0.663
0.981
1.380
0.840
0.181
0.513
0.924
0.764
2005
2385
2305
5011
1955
3409
4450
4010
4770
4610
10022
3910
6818
6675
C9743
C6224
C7082
C8561
C9297
3212
Mini-Maxi Ends
C10741
26
C10944
High-Performance
Athwartship
CARS
C10613
C10584
C10914
C11403
C10585
C11201
Part
No.
Description
Sheave
mm
Length
mm
Width
mm
Height
mm
Weight
kg
Maximum
working load
kg
Breaking
load
kg
60
66
90
75
292
254
305
113.7
64.5
63
80.2
81.4
107
109
165.4
74
2.04
2.1
4.33
.862
8000
8000
12000
7000
16000
16000
24000
14000
67.3
90
117
47.2
65.9
42.9
166
193.4
153.7
1.12
1.46
.89
8000
12000
12000
16000
24000
24000
Floating Blocks
C10914
C11403
C12343
Track
Typical
Fastener
Fastener
Pinstop Hole
Weight
Spacing
Size
Spacing
per Meter
mm
(FH)
mm
kg
32 mm Big Boat, Pinstop
100
M10
100
1.47
42 mm Mini-Maxi, Pinstop
75
M10
37.5
1.54
40 mm Aluminum T-Track
75
M12
50
1.03
Tracks are customized to application, and fastener size and spacing may vary. Additional
pinstop or lightening holes may be possible. Weight listed is for standard hole drilling.
27
Superyacht
CARS
Cars available with a plain body,
pinstops, or puller tangs
Pinstops lock in place; double pinstops for higher load capacity.
Harken recommends remote pinstops for sheet loads above 9T.
Puller tangs for powered adjustments.
Hardcoat-anodized aluminum or polished 316 stainless steel.
C10101
C9869
C9242
C9879
C11288
C9491
C8785
C10901
28
C11231
C10948
C11142
Superyacht
CARS
Cars
Part
No.
Weight
kg
Maximum
working
load
kg
Breaking
load
kg
273
289
290.5
8.82
12.63
12.84
7000
13000
13000
20000
26000
26000
94
94
94
102
94
94
321
346
346
395
355
359
19.54
18.40
18.67
42.22
12.54
12.94
23000
23000
23000
30000
15000
23000
46000
46000
46000
60000
30000
46000
86
76.2
101.6
40
665.1
63.19
20.7
49.48
60.88
0.47
1.043
1.678
7000
2468
13000
14000
4936
26000
101.6
177.8
84.99
101.6
101.6
85.75
85.75
50.29
85.75
85.75
61.42
71
27.81
58.5
65.94
1.50
1.620
0.785
2.268
2.313
1615
5011
3175
6804
13000
3230
10022
6350
13608
26000
Sheave
mm
Length
mm
Width
mm
Height
mm
150
175
175
279
356
356
65
63
63
200
200
200
200
175
200
356
356
356
533
356
406.4
Description
1889
C5834
C8774
C9043
C9577
C9869
C11288
40 mm Ends
1889
C6109
C9043
50 mm Ends
C10950
C6109
C6448
C5833
C10950
C5834
C6448
C8774
Track
Typical fastener
spacing
Fastener size
Pinstop hole spacing
mm
(FH)
mm
40 mm Stainless Steel T-Track
100
M12
50
50 mm Aluminum T-Track
50
M12
50
50 mm Stainless T-Track
50
M12
50
Tracks are customized to application, and fastener size and spacing may vary. Additional pinstop or lightening holes may be possible.
Weight listed is for standard hole drilling.
29
BATTCAR
SWITCH SYSTEM
Our simple, but sophisticated award-winning switch systems have put the word manageable
back into mainsail control. These innovative systems offer smooth, low-friction operation
under the highest loads, and flake the sail automatically as cars are lowered.
Available in clear (silver) or black-anodized finishes.
FPO
Trysail
switch
Halyard Locks
New design handles high halyard loads
High-strength stainless steel pawls integrated
into car, fit into high-load machined track wells.
Trysail
loading
Main
switch
Cross-section of
halyard locking car
Easy to inspect
Locking mechanics in car, not mast.
Main
storage
31
Battcar
SWITCH
HC8076
C9313
Cars
Part
No.
C10834
HC7493
C8476
HC9045
HC9046
C9475
Breaking
Load
kg
120
120
120
120
120
120
2045
455
682
955
1727
454
4090
910
1364
1910
3454
908
350
350
350
350
350
350
350
350
350
350
225
225
225
225
225
225
225
225
225
225
3635
1273
1814
1818
1818
2722
1818
3590
1818
1270
7270
2546
3628
3628
3628
5444
3636
7180
3636
2540
350 +
350 +
350 +
350 +
350 +
350 +
350 +
275 +
275 +
275 +
275 +
275 +
275 +
275 +
2045
3408
3408
5670
9000
7500
2041
4090
6816
6816
11340
18000
15000
4082
Weight
g
Headboard car*
Intermediate car
Batten car/12 mm stud
Reef car*
Tack car
Trysail car*
270
60
75
90
90
60
60
60
60
60
111.2
26
973
159
250
205
409
143
160
160
160
160
160
160
Headboard car*
Intermediate car
Quick pin batten car
Batten car/12 mm stud
Batten car/14 mm stud
Reef car*
Reef/Batten combo car*
Tack car
Batten car/16 mm stud
Trysail car*
280
75
90
90
90
115
127
115
90
75
70
70
70
70
70
70
70
132
70
77
1266
297
457
319
319
409
669
830
601
309
Intermediate car
Batten car/16 mm stud
Batten car/18 mm stud
Reef car
Tack car
Headboard car
Trysail car*
100
141
141
200
200
450
100
110
110
110
110
205.3
110
120
1043
1724
1782
4763
4763
6078
1658
Description
HC9045
HC7493
HC7324
HC7325
HC8125
C9494
32 mm
HC9046
HC7322
C11443
HC8098
HC7316
HC8076
C10834
HC8099
C9782
C9342
C9494
C9342
C9338
50 mm
32
Maximum
working load
kg
Width
mm
26 mm
HC7322
C7811
HC8125
HC8099
C9314
Length
mm
HC7316
C7814
C9299
C9782
C10959
C7811
C7814
C9299
C9313
C9314
C9475
C9338
*May increase MWL by using track with closer hole spacing; contact Harken.
Battcar
SWITCH
Length
mm
Width
mm
Weight
g
Fasteners
mm
Fastener spacing
mm
Switch*
500 mm storage track*
725 mm storage track*
725 mm double storage track*
3 m T-Track*
2 m T-Track/high-load*
Gate track*
Port Trysail Switch*
Starboard Trysail Switch*
Splice link
Endstop
Push-button endstop
641
500
725
725
3000
2000
300
368
368
55
100
102
26
26
93.3
26
26
26
121
121
26
39
26
1225
291
419
1623
1736
1141
174
762
762
3
29
79
6
6
6
6
6
6
6
6
6
6
6
50
50
50
75
50
75
22
60
Switch*
800 mm storage track*
1025 mm storage track*
3 m T-Track*
2 m T-Track/high-load*
Gate track*
Splice link
Endstop
Port Trysail Switch*
Starboard Trysail Switch*
Push-button endstop
724
800
1025
3000
2000
300
72
406
406
150
127
32
32
32
32
32
52
149
149
32
2068
728
933
2734
1790
273
5
146
1222
1222
130
8
8
8
8
8
8
8
8
8
8
50
50
75
50
75
27
75
Switch*
3 m T-Track*
6 m T-Track*
Gate track*
Port Trysail Switch*
Starboard Trysail Switch*
Splice link
Endstop*
1134
3000
6000
300
635
635
70
198.44
50
50
50
223
223
94
7838
6589
13173
659
4465
4465
13
537
12
12
12
12
12
12
12
75
75
75
Description
HC11662
26 mm
HC8220
HC8147
HC8148
HC10060
HC7466
HC8879
HC8221
C9493
C9492
HC8222
1522ASSY
C10539
C9673
3876
C10539
C10419
3877
32 mm
HC7382
HC8149
HC8150
HC7391
HC8880
HC8226
HC8227
548ASSY
C9341
C9340
C10419
50 mm
C7807
C7808
C8196
C8228
C9337
C9336
C8229
C8217
C9493
C9341
C9337
C9492
C9340
C9336
Description
High-load track
32 mm x 3.9 m*
Headboard plates
Part
No.
3876
3877
C9673
Description
Web-on headboard plate
Web-on headboard plate/flat-top
Web-on headboard plate
Length
mm
1899
3900
Length
mm
268
273
394
Width
mm
32
40
Width
mm
201
282
416
Weight
g
1760
3860
Weight
g
828
1343
5498
Fasteners
mm
Fastener
spacing
mm
Fits
HC9045/HC9046
HC9045/HC9046
C9475
33
MKIV Hydraulic
FURLING
S/Y Quintessential, Builder: Yachting Developments, Designer: Warwick Yacht Design, PM: Peter Wilson at MCM Chris Lewis
35
MKIV Hydraulic
FURLING
Features
Manual override winch handle with safety lockout.
Easy headstay adjustment with over-the-turnbuckle design.
Lower toggle fixes at 90-degree intervals to accept chainplate direction.
Fewer deck holes with two hoses plumbed on
boat and the case drain line eliminated.
Standard transmission replaces diverter valve to engage motor
and manual gear socket for reduced pressure losses.
Optional hydraulic cylinder offloads the swivels to keep
luff tension constant when adjusting headstay.
Halyard/tack swivels on units 4 and larger lashed on.
36
MKIV Hydraulic
Part
No.
Wire
mm
Rod
- size
Clevis pin
mm
Standard
headstay length
m
Max
headstay length
m
7413.15
11, 12
-22, -30
19, 22.2
22.77
24.91
12
14, 16
-30, -40
-48
22.93
22.93
29.33
29.33
16
19, 22
-48, -60
-76
28.6, 31.8
28.6, 31.8
28.6, 31.8
23.8
26.5
26.5
34.7
34.7
34.7
22, 25
-76
-91
-115
28.8
28.8
28.8
38.8
38.8
38.8
FURLING
Unit 3
Unit 4
7414.15S
7414.15L
Unit 5
7415.15S
7415.15M
7415.15L
Unit 6
7416.15S
7416.15M
7416.15L
Unit 7
7417.15S
-115,
7417.15M
-150
7417.15L
-170
7417.15 X.XXX* All other rigging: Customer-supplied dimensions
Unit 8
-170, -195, -220, -260,
-320
7418.15 X.XXX* All other rigging: Customer-supplied dimensions
*Specify rigging dimensions when ordering.
7418.15
37
WINCHES
Harken winches are kings of power and speed and will set
you on the path to fast, efficient sail handling. Harken project
managers are available to work with you on gear ratios, motor
selection, and power settings, ensuring your winches perform
at full potentialfrom superfast line speeds when gybing,
to hoisting a wet MPS to the top of the mast in fast gear.
Options
Offered in corrosion-resistant aluminum, chrome,
stainless steel, bronze, carbon fiber, and combinations.
Multiple motor options are available to ensure
necessary pull loads and optimal line speed.
Standard three forward speeds with an optional
fourth speed on some winch models.
S/Y Lionheart, 43.4 m, J-Class, Builder: Classen Jachtbouw, Designer: Andre Hoek, PM: Nigel Ingram at MCM Ingrid Abery
Options (continued)
Backwind available for some models.
Self-tailing, top-cleat, plain top configurations.
Winches are offered with first gear options. 1:1 first gear for
extremely high line speeds at lower loads, or a reduced first gear
option to pull high loads for longer duration of speed.
Free-spinning or ratcheting base sheaves available for most winch models.
Programmable Harken valve controller (Smart Valve)
provides optimal pull force in each gear.
39
WINCHES
B990STGGG
B1235STSSS
B1111STSSS
B1145STGGG
70STCCC
B1130STGGG
Drum
Base
Materials
Part
AAA
ASA
BBB
SSS
CAC
mm
mm
No.
B990.3
203
280
4
4
4
4
B1111.3
280
360
4
4
4
4
B1111.3-HL
280
351
4
4
4
4
B1120.3-HL R
298
418
4
4
4
4
B1130.3
324
409
4
4
4
4
B1235.3
324
409
4*
4
4
4*
B1145.3
362
538
4
4
4
4
4
B1150
410
640
4
4
4
*B1235 drum is always supplied with a stainless steel ring. See standard catalog for complete range.
40
Max
Line Line entry
Line
ASA
SSS
CAC
MWL
min-max
height
Gear ratio
Speed3
kg
kg
kg
mm
mm
1
2
3
m/min
kg
37
39
27
11 - 19
150
1
9.9
40.1
127
5000
55
33
11 - 19
94
1
9.7
44.7
140
5500
54
63
46
11 - 19
94
1
9.7
44.7
140
7000
80
102
66
14 - 25
163
2.6
10.8
55.2
104
8800
68
69
50
16 - 25
115
1
10.8
55.2
163
9000
72
73
52
16 - 25
115
1
9.38
48.04
163
11000
139
166
115
16 - 22
208
2.9
11.6
53.5
62
13760
204
204
14 - 25
225
3.4
15.3
64.9
62
15000
1
Heights listed are for ST models.
2
Weights include standard hydraulic motors, and assume self-tailing.
3
Line speeds listed are with standard hydraulic motors and typical settings. Contact Harken for more information.
Weight2
Height
mm
294
236
263
367
308
308
419
502
AAA
kg
31
35
48
67
51
55
118
WINCHES
B1145STAAA
70STA
B1130STAAA
B990STAAA
B1111PTBBB
B980PTBBB
AAA*
70STBBB
Letter code
AAA
ASA
BBB
CAC
GGG
SSS
ASA*
BBB*
1st Letter: Base
Aluminum
Aluminum
Polished bronze
Carbon
Grey-anodized aluminum
Stainless steel
CAC*
GGG*
SSS*
3rd Letter: Top
Aluminum
Aluminum
Polished bronze
Carbon
Grey-anodized aluminum
Stainless steel
41
Captive Reel
WINCHES
Designed for luxury sailing yachts, Harken captive winches are compact
powerhouses that fit neatly into small belowdeck spaces. Traditionally,
hydraulic motors have been preferred for their small size and high torque
output. But as industry drives motor and battery development forward, new
options have become available. Variable displacement hydraulic motors allow
finer control. Electric motors with the same performance output as hydraulic
are also available. Before shipping, each winch is calibrated and tested to its
maximum working load, instilling confidence in every captive we supply.
Features
Hydraulic motor
Captives are driven by industrial-sealed hydraulic motors.
S/Y Ganesha, 46m Sloop, Builder: Vitters Shipyard, Designer: Dubois, PM: Klaus & Sebastian Allebrodt Ingrid Abery
Synchronized transmission
Synchronized transmission uses two gear sets (four gears) to drive the twin feeder screws.
Changing line diameters requires a simple change-out of gear sets.
Feeder transmissions twin feeder screws balance the load on the feeder.
Reduce the load on the nut and feeder guide, allowing moother
movement and higher speed.
Electric motor
Captives are also available with electric motors.
Capable of matching hydraulic performance.
Dual sensors
Double electric sensors control the stroke of the feeder.
Double back-up mechanical sensors.
A laser sensor detects line overrides on the drum.
Optional load pin measures static and dynamic line loads.
Manifolds
Our manifolds feature counterbalance valve circuits to control loads
while easing. Units can be customized to meet your specifications.
Timing optimized between winch and tensioner
Solenoid directional cartridge.
Smooth brake engagement
Flow-control valve.
Manual override
Brake valve supplied with a manual override knob.
43
Captive Reel
WINCHES
Power/Sheet Size Guide
1.5T
3T
Line
Maximum
Maximum
dynamic pull
holding load
Min
Max
Max pressure
Flow rate
Part
No.
kg
kg
mm
mm
Bar
L/min
1.5T
1500
2500
12
18
120
50
3T
3000
5000
12
18
190
50
6T
6000
9000
14
22
240
70
9T
9000
12000
16
26
250
80
12T
12000
15000
18
28
250
100
16T
16000
19000
24
32
250
120
18T
18000
21000
24
32
285
120
25T
25000
30000
32
40
280
200
50T
50000
60000
40
66
325
170
70T
70000
80000
48
66
350
200
Loads and converted sizes are guides only. Winches are customized to application. Line speeds can vary with each winch and power configuration.
*Larger winches may be driven by different displacement motors. Contact Harken for max pressure details.
Line
12 mm
m
Line
14 mm
m
Line
16 mm
m
Line
18 mm
m
Line
20 mm
m
Line
22 mm
m
Line
24 mm
m
Line
26 mm
m
420
520
14.9
20.1
13.4
18.1
11.8
16.0
10.2
13.8
420
520
720
920
1120
14.9
20.1
30.6
41.0
51.5
12.5
16.9
25.7
34.5
43.3
11.8
16.0
24.2
32.5
40.8
10.2
13.8
21.0
28.1
35.3
810
1010
1210
1410
21.2
33.5
45.8
58.1
18.6
29.4
40.2
51.0
17.1
27.0
36.9
46.8
14.9
23.6
32.3
41.0
13.9
22.0
30.1
38.2
29.2
42.0
55.1
68.1
81.0
26.6
38.4
50.2
62.0
73.8
23.9
34.6
45.2
55.9
66.5
23.1
33.4
43.7
54.0
64.3
21.3
30.7
40.2
49.7
59.1
1.5T
3T
6T
6T
9T
12T
16T
18T
25T
44
9T
930
32.7
1130
47.0
1330
61.7
1530
76.2
1730
90.7
Line storage lengths are guides only. Winches are customized to application.
Captive Reel
WINCHES
Open-ended design
reduces weight.
Line
18 mm
m
Line
20 mm
m
Line
22 mm
m
Line
24 mm
m
Line
26 mm
m
Line
28 mm
m
Line
30 mm
m
Line
32 mm
m
Line
34 mm
m
Line
36 mm
m
Line
38 mm
m
Line
40 mm
m
26.2
39.2
51.7
64.5
77.3
23.8
35.5
47.1
58.7
70.4
21.5
32.0
42.4
52.9
63.4
20.8
30.9
41.0
51.1
61.3
19.2
28.5
37.9
47.3
56.6
18.4
27.3
36.3
45.2
54.2
28.0
45.6
57.3
68.9
25.1
40.9
51.3
61.8
24.3
39.5
49.6
59.7
22.4
36.4
45.8
55.1
21.5
35.0
44.0
53.0
28.0
45.6
57.3
68.9
25.1
40.9
51.3
61.8
24.3
39.5
49.6
59.7
22.4
36.4
45.8
55.1
21.5
35.0
44.0
53.0
20.7
34.7
44.1
53.4
62.7
Line
40 mm
39.0
49.4
59.9
70.4
80.8
91.3
101.8
112.2
18.9
31.6
40.1
48.6
57.1
Line
42 mm
36.5
46.3
56.0
65.8
75.6
85.4
95.2
105.0
17.0
28.5
36.1
43.7
51.4
Line
46 mm
34.1
43.3
52.5
61.6
70.8
80.0
89.2
98.3
16.4
27.5
34.8
42.2
49.6
Line
50 mm
31.8
40.3
48.9
57.4
65.9
74.5
83.0
91.6
15.2
25.4
32.2
39.0
45.8
Line
54 mm
29.4
37.3
45.2
53.1
61.0
68.9
76.8
84.7
12T
930
1130
1330
1530
1730
16T
1030
1330
1530
1730
18T
1030
1330
1530
1730
25T
1030
1330
1530
1730
1930
50T
1670
1870
2070
2270
2470
2670
2870
3070
Line storage lengths are guides only. Winches are customized to application.
Captive
Length Size
Line
48 mm
Line
52 mm
Line
56 mm
Line
60 mm
Line
64 mm
mm
1670.0
1870.0
2070.0
2270.0
2470.0
2670.0
2870.0
3070.0
35.8
46.0
56.2
66.4
76.6
86.9
97.1
107.3
33.5
43.0
52.6
62.1
71.7
81.3
90.8
100.4
31.3
40.2
49.2
58.1
67.1
76.0
84.9
93.9
29.1
37.4
45.8
54.1
62.4
70.7
79.0
87.3
26.9
34.6
42.3
50.0
57.7
65.4
73.0
80.7
70T
45
TENSIONERS
CT2
CT1
Carbon cover on CT3 tensioner
CT3
CT4
CT6
46
CT5
CT7
47
Hydraulic
CYLINDERS
Harken hydraulic cylinders transform raw power into fast forward. Our
lightweight, high-strength materials and reengineered components
have made them impressively smaller, with higher load capacities
than other models. Cylinders are offered in hardcoat-anodized
aluminum or stainless steel, with corrosion resistant stainless
steel rods and pins. Low friction seals provide smooth control.
S/Y Christopher, 46 m Ketch, Builder: Pendennis Shipyard, Designer: Ron Holland, PM: Duane McPhail
S/Y Inou, 33.44 m (109.7'), Builder: Vitters Shipyard, Designer: Philippe Briand Yacht Design, PM: Stephane Luca Ingrid Abery
Single-Acting Cylinders
Control backstays, outhauls, cunninghams,
inner forestays, and more.
Oil on one end, air-spring return; hydraulic force
directed in one direction to extend cylinder.
Custom stroke lengths available.
Variety of end fitting available.
49
Single-Acting
CYLINDERS
- Size
Stroke
mm
-6
265
474
0.97
-6
360
569
1.13
HYCS025110530
-6
530
739
HYCS035130230
-10
230
HYCS035130350
-10
HYCS035130510
Diameter
Pull force***
@ 3626 psi
250 bar
kg
@ 5000 psi
345 bar
kg
Breaking
load
kg
Volume
L
Gap/pin
mm
Bore
mm
Rod
mm
Max OD
mm
@ 2000 psi
140 bar
kg
2.03
0.11
11.1
25
11
38
576
1047
1440
2903
2.36
0.15
11.1
25
11
38
576
1047
1440
2903
1.42
2.96
0.22
11.1
25
11
38
576
1047
1440
2903
494
1.54
3.44
0.19
12.7
35
13
46
1169
2125
2922
5851
350
609
1.88
4.20
0.29
12.7
35
13
46
1169
2125
2922
5851
-10
510
789
2.37
5.36
0.42
12.7
35
13
46
1169
2125
2922
5851
HYCS040160260
-12
260
508
2.08
4.41
0.24
15.9
40
16
50
1325
2409
3312
6622
HYCS040160375
-12
375
629
2.53
5.39
0.35
15.9
40
16
50
1325
2409
3312
6622
HYCS040160625
-12
625
905
3.54
7.62
0.59
15.9
40
16
50
1325
2409
3312
6622
HYCS045160260
-17
260
507
2.47
5.46
0.35
15.9
45
16
58
1904
3461
4759
9525
HYCS045160375
-17
375
634
3.01
6.69
0.51
15.9
45
16
58
1904
3461
4759
9525
HYCS045160800
-17
800
1095
4.96
11.19
1.08
15.9
45
16
58
1904
3461
4759
9525
Part
No.
HYCS025110265
HYCS025110360
*For pin center length open add stroke length to pin center length closed.
50
Weight**
6061-T6
316
aluminum
stainless
kg
kg
Pin center
length
(closed)*
mm
Maximum air return force ratio is 10:1, not included in pull force calculation.
Single-Acting
CYLINDERS
Part
No.
- Size
Stroke
mm
Pin center
length
(closed)*
mm
Weight**
6061-T6
316
aluminum
stainless
kg
kg
Diameter
Volume
L
Gap/pin
mm
Bore
mm
Rod
mm
Max OD
mm
@ 2000 psi
140 bar
kg
Pull force***
@ 3626 psi
250 bar
kg
@ 5000 psi
345 bar
kg
Breaking
load
kg
HYCS055190275
-22
275
568
4.23
9.63
0.59
19.1
55
19
73
3009
5470
7522
15059
HYCS055190400
-22
400
693
5.09
11.62
0.86
19.1
55
19
73
3009
5470
7522
15059
HYCS055190900
-22
900
1263
8.84
20.50
1.93
19.1
55
19
73
3009
5470
7522
15059
HYCS065220300
-30
300
637
5.83
13.12
0.83
22.2
65
22
81
3908
7105
9769
19550
HYCS065220450
-30
450
787
7.06
15.87
1.25
22.2
65
22
81
3908
7105
9769
19550
HYCS065221025
-30
1025
1407
12.03
27.12
2.85
22.2
65
22
81
3908
7105
9769
19550
HYCS075250300
-40
300
700
9.29
21.23
1.22
25.4
75
25
97
5700
10364
14250
28486
HYCS075250475
-40
475
874
11.28
25.74
1.93
25.4
75
25
97
5700
10364
14250
28486
HYCS075251150
-40
1150
1606
19.40
44.51
4.66
25.4
75
25
97
5700
10364
14250
28486
HYCS080250300
-48
300
719
10.73
25.55
1.33
28.6
80
25
103
6246
11356
15614
31207
HYCS080250475
-48
475
892
13.05
31.04
2.11
28.6
80
25
103
6246
11356
15614
31207
HYCS080251150
-48
1150
1626
22.56
53.87
5.11
28.6
80
25
103
6246
11356
15614
31207
HYCS090320375
-60/-76
375
796
15.64
36.60
2.03
31.8
90
32
116
7615
13846
19037
38056
HYCS090320550
-60/-76
550
999
19.11
44.72
2.98
31.8
90
32
116
7615
13846
19037
38056
HYCS100320425
-90
425
889
23.15
54.5
3.11
34.9
100
32
132
10287
18703
25717
51437
HYCS100320625
-90
625
1099
28.14
66.4
4.39
34.9
100
32
132
10287
18703
25717
51437
HYCS115350475
-110
475
1014
31.82
74.3
4.43
38.1
115
35
147
13081
23784
32703
65408
HYCS115350700
-110
700
1255
38.86
91.2
6.51
38.1
115
35
147
13081
23784
32703
65408
HYCS130380475
-150
475
1090
47.11
109.0
5.79
44.5
130
38
165
17111
31111
42778
85548
HYCS130380700
-150
700
1315
55.30
129.2
8.52
44.5
130
38
165
17111
31111
42778
85548
HYCS145480500
-195
500
1014
64.25
144.5
7.49
54
145
48
188
21052
38276
52630
105279
HYCS145480750
-195
750
1384
76.43
173.5
11.23
54
145
48
188
21052
38276
52630
105279
*For pin center length open add stroke length to pin center length closed.
Maximum air return force ratio is 10:1, not included in pull force calculation.
51
CYLINDERS
Double-Pull Cylinders
Adjust mainsheet travelers/jib sheet cars.
Rods at both ends; hydraulic force directed with
equal force and speed in two directions.
Cylinder easily removes from mounting brackets for
service; unscrew four screws, brackets left in place.
Selection of rod end fittings to suit
various purchase options.
Locking Cylinders
Used on backstays of large cruisers
during long passages; mast set-up.
Adjustable mechanical lock threaded onto the
rod prevents it from moving. This fixed position
is independent of the boats pressure system.
Acts as safety backup for hydraulic system.
52
Part
No.
- Size
Zero stroke
length (A)*
mm
Zero stroke
bracket spacing
(B)**
mm
Mounting retainer
(C)
mm
Outside
(D)
mm
Rod
thread size
UNF 2A
Weight
kg @ zero stroke
length + kg/mm
stroke
Double-Pull Cylinders
HYCP02511xxxxBNN
-6
300.8
217.0
HYCP03513xxxxBNN
-10
349.9
236.9
HYCP04016xxxxBNN
-12
344.5
229.5
HYCP04516xxxxBNN
-17
351.9
236.4
HYCP05519xxxxBNN
-22
401.6
259.7
HYCP06522xxxxBNN
-30
441.0
298.8
HYCP07525xxxxBNN
-40
566.7
359.5
*Overall cylinder length equals zero stroke length plus two times the desired stroke.
41
51
7/16" -20
23
0.87 + .003
47
57
1/2" -20
38
1.39 + .004
47
57
5/8" -18
33
1.60 + .005
47
58
5/8" -18
33
1.85 + .006
55
73
3/4" -16
51
3.11 + .009
55
81
7/8" -14
50
4.15 + .011
76
97
1" -12
82
7.28 + .015
**Overall bracket spacing equals zero stroke bracket spacing plus the desired stroke.
Weight***
Pin center
length
6061-T6
316
(closed)** aluminum (B/C stainless (S)
mm
kg
kg
- Size
Stroke
mm
HYCL045160375
HYCL055190400
HYCL065220450
HYCL075250475
-17
-22
-30
-40
375
400
450
475
1116
1210
1362
1487
5.42
8.71
12.36
18.86
HYCL080250475
-48
475
1505
22.52
Diameter
Volume
L
Gap/pin
mm
Bore
mm
Rod
mm
Max OD
mm
11.65
18.76
26.25
39.31
0.51
0.86
1.25
1.93
15.9
19.1
22.2
25.4
45
55
65
75
16
19
22
25
58
73
81
97
49.54
2.11
28.6
80
25
103
HYCL090320550
-60
550
1701
31.82
66.00
2.98
31.8
HYCL100320625
-90
625
1889
44.85
99.29
4.57
34.9
For pull forces, see cylinder with corresponding bore and rod diameter on page 50-51.
*Specify material choice and rod and clevis end fittings by adding appropriate 3-letter code to end of part number.
**For pin center length open add stroke length to pin center length closed. ***Rod ends (clevis) included in weights.
90
100
32
32
116
132
Part
No.*
Locking Cylinders
Megayacht
VANGS
Adjustable lock prevents rod
movement during pressure release.
Vang Cylinders
40000
35000
Options
Boom angle indicator keeps boom angle correct while furling.
HYCG165640450
HYCG145640330
HYCG130640330
HYCG115540285
30000
25000
20000
15000
10000
5000
7000
6000
5000
2000
4000
3000
-Size
@ 1000psi /
69 bar
kg
@ 2000 psi /
138 bar
kg
Pull force
@ 3000 psi /
207 bar
kg
@ 4000 psi /
276 bar
kg
@ 5000 psi /
345 bar
kg
Breaking
load
kg
5605
7131
11211
14261
16816
21392
22,422
28,522
28,027
35,653
56054
71306
9552
13057
19104
26115
28656
39172
38,208
52,230
47,760
95520
104460
-110
-150
HYCG145640515
-195
HYCG165640515
-260
*Return force varies based on oil pressure.
Part
No.
-Size
Stroke
mm
Volume
Diameter
Weight
Base weight
kg + (PCLC x kg/mm)
Retracted
L
Extended
L
Gap/pin
mm
Bore
mm
Rod
mm
Housing OD
mm
Extension tube OD
mm
41.27 + 0.01722
59.64 + 0.02154
60.23 + 0.02939
75.57 + 0.03634
2.29
3.35
4.49
8.29
4.82
7.57
9.00
14.73
34.9
38.1
44.5
50.8
115
130
145
166
54
64
64
64
178
203
222
240
136
152
173
201
515
515
515
515
1778
1905
2286
2489
4826
4953
5080
6604
53
Rod End
BLOCKS
Rod End Blocks
Reverse purchase blocks reduce cylinder
length and weight; increase space.
Cunninghams, stay deflectors,
travelers, athwartship jib systems.
Available in single, single w/becket or
double sheave; 1:2 1:4 purchases.
HYCBS11
HYCBS13
HYCBS16
HYCBS19
HYCBS22
C10586
C10922
C11457
HYCBB16
HYCBB19
HYCBB22
HYCBD11
HYCBD13
HYCBD16
HYCBD19
HYCBD22
C10761
C11028
C11144
C12071
C12140
Rod End
BLOCKS
Lashing eye
Clevis
No fitting
Marine eye
Rod End
Fittings
Part
No.
Description
Fits Rod
Rod Thread
Sheave
11
11
13
13
16
16
16
19
19
19
22
22
22
25
25
25
25
32
32
32
32
38
38
7/16'' -20
7/16'' -20
1/2'' -20
1/2'' -20
5/8'' -18
5/8'' -18
5/8'' -18
3/4'' -16
3/4'' -16
3/4'' -16
7/8'' -14
7/8'' -14
7/8'' -14
1'' -12
1'' -12
1'' -12
1'' -12
1 1/4'' -12
1 1/4'' -12
1 1/4'' -12
1 1/4'' -12
1 1/2'' -12
1 1/2'' -12
52
52/33
52
52/33
82
82
82/52
82
82
82/52
108
108
108/82
125
125/82
125
175
125
125
100/60
125
190
190/125
Length
Reverse
Purchase
Weight
kg
Max Line
mm
Maximum
working load
kg
Breaking
load
kg
101
139
101
139
132
188
189
144
200
201
189
275
278
226
316
316
275
240
250
262
305
350
480
1:2
1:3, 1:4
1:2
1:3, 1:4
1:2
1:3
1:4
1:2
1:3
1:4
1:2
1:3
1:4
1:2
1:4
1:3
1:3
1:2
1:2
1:4
1:3
1:2
1:4
.466
.580
.463
1.655
.801
.996
1.069
1.000
1.244
1.315
1.701
2.192
2.202
3.040
4.210
4.210
3.930
3.190
3.300
2.224
4.030
8.090
10.520
14
14
14
14
16
16
16
16
16
16
18
18
18
20
20
20
25
20
30
19
20
25
30
1440
1440
2922
2922
4759
4759
4759
7522
7522
7522
9769
9769
9769
15614
15614
15614
15614
15614
18700
10000
15000
25000
25667
2903
2903
5851
5851
9525
9525
9525
15059
15059
15059
19550
19550
19550
31228
31228
31228
31228
31228
37400
20000
30000
50000
51334
Single
Double*
Single
Double*
Single
Single/becket
Double
Single
Single/becket
Double
Single
Single/becket
Double
Single
Double
Single/becket
Single/center becket
Single
Single
Double
Single/becket/hycs090 cylinders
Single/sliding block
Double
Maximum working load is equal to maximum pull force for appropriately sized cylinder.
55
C UST OM YAC HT