Você está na página 1de 8

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.08.

05 11:37:41 =~=~=~=~=~=~=~=~=~=~=~=
Format: Log Type - Time(microsec) - Message
Log type: B - since boot(excluding boot rom). D - delta
B 170952 - SBL1, Start
B 176229 - scatterload_region && ram_init, Start
D 0 - scatterload_region && ram_init, Delta
B 193187 - pm_device_init, Start
D 13267 - pm_device_init, Delta
B 206546 - boot_flash_init, Start
D 30 - boot_flash_init, Delta
B 210511 - boot_config_data_table_init, Start
D 73657 - boot_config_data_table_init, Delta
B 288865 - sbl1_ddr_set_params, Start
D 0 - sbl1_ddr_set_params, Delta
B 297375 - pm_driver_init, Start
D 12291 - pm_driver_init, Delta
B 310093 - cpr_init, Start
D 61305 - cpr_init, Delta
B 371429 - Pre_DDR_clock_init, Start
D 61 - Pre_DDR_clock_init, Delta
B 377651 - do_ddr_training, Start
D 915 - do_ddr_training, Delta
B 384574 - clock_init, Start
D 122 - clock_init, Delta
B 389912 - Image Load, Start
D 62769 - TZ Image Loaded, Delta
B 452742 - Tz Execution, Start
D 200903 - Tz Execution, Delta
B 664320 - Image Load, Start
D 19459 - RPM Image Loaded, Delta
B 685091 - Signal PBL to Jump to RPM FW
B 686524 - Image Load, Start
D 15128 - WDT Image Loaded, Delta
B 701683 - WDT Execution, Start
D 335 - WDT Execution, Delta
B 705526 - Image Load, Start
D 17263 - APPSBL Image Loaded, Delta
B 722789 - sbl1_efs_handle_cookies, Start
D 1586 - sbl1_efs_handle_cookies, Delta
B 728584 - RPM sync cookie updated
B 732213 - SBL1, End
D 563549 - SBL1, Delta
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk
[10] platform_init()
[10] target_init()
[60] Done initialization of the card
[80] Not able to search the panel:
[80] Display not enabled for 24 HW type
[90] Target panel init not found!
[90] fastboot_init()
[110] Loading keystore failed status 5 [870] fastboot: processing commands
[6620] fastboot: download:0004a000
[6660] fastboot: boot
[6660] Device tree's msm_id matches the board: <178 24 0 0x10001> == <178 24 0 0
x10001>
[6670] pm8x41_get_is_cold_boot: cold boot

[6670] cmdline: androidboot.bootdevice=msm_sdcc.1 androidboot.serialno=f00e0bcf


androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
[6680] Updating device tree: start
[6680] Updating device tree: done
[6690] booting linux @ 0x8000, ramdisk @ 0x2000000 (0), tags/device tree @ 0x1e0
0000
U-Boot 2016.03-03689-gb6979e7-dirty (May 31 2016 - 11:25:10 +0200)
Qualcomm-IFC6540
DRAM: 1.9 GiB
WARNING: Caches not enabled
MMC: sdhci@f9824900: 0, sdhci@f98a4900: 1
Using default environment
In:
serial@f995e000
Out: serial@f995e000
Err: serial@f995e000
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 2 1 0
reading ubldr
260459 bytes read in 81 ms (3.1 MiB/s)
## Starting application at 0x00100098 ...
Consoles: U-Boot console
Compatible U-Boot API signature found @0x79aa5950

FreeBSD/armv6 U-Boot loader, Revision 1.2


(miljan@miljan-freebsd, Tue May 31 09:31:41 CEST 2016)

DRAM: 1955MB
Number of U-Boot devices: 2
U-Boot env: loaderdev='mmc1:2'
Found U-Boot device: disk
Checking unit=1 slice=2 partition=<auto>... good.
Booting from disk1s2:

|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
|/boot/kernel/kernel data=0x5b85a4+0xa3a5c /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
-\|/-\|/-\|syms=[0x4+0x7f2e0/-\|+0x4+0x9361d/-\|]

Hit [Enter] to boot immediately, or any other key for command prompt.

Booting
Booting
Booting
Booting
Booting
Booting
Booting
Booting
Booting
Booting

[/boot/kernel/kernel] in
[/boot/kernel/kernel] in
[/boot/kernel/kernel] in
[/boot/kernel/kernel] in
[/boot/kernel/kernel] in
[/boot/kernel/kernel] in
[/boot/kernel/kernel] in
[/boot/kernel/kernel] in
[/boot/kernel/kernel] in
[/boot/kernel/kernel]...

9
8
7
6
5
4
3
2
1

seconds...
seconds...
seconds...
seconds...
seconds...
seconds...
seconds...
seconds...
second...

Using DTB compiled into kernel.


/-\|/Kernel entry at 0x200100...
Kernel args: (null)
ARM Debug Architecture v7.1
4 watchpoints and 6 breakpoints supported
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-BETA3 #3 0d5e1b6(ifc6540-stable)-dirty: Fri Aug 5 11:30:45 CEST 20
16
root@pcbsd-miljan:/usr/obj/arm.armv6/usr/home/miljan/Qualcomm/FreeBSD/usr/sr
c/sys/IFC6540 arm
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0
)
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0973000.
CPU: Krait 450 rev 1 (Krait core)
Supported features: ARM_ISA THUMB2 THUMBEE ARMv4 Security_Ext
WB enabled LABT branch prediction disabled
LoUU:2 LoC:3 LoUIS:2
Cache level 1:
16KB/64B 4-way data cache WT Read-Alloc
16KB/64B 4-way instruction cache Read-Alloc
Cache level 2:
2048KB/128B 8-way unified cache WT WB Read-Alloc Write-Alloc
real memory = 2049961984 (1954 MB)

avail memory = 1994031104 (1901 MB)


Physical memory chunk(s):
0x00001000 - 0x7a2fffff, 1954 MB ( 500479 pages)
Excluded memory regions:
0x00200000 - 0x00a44fff,
8 MB ( 2117 pages) NoAlloc
Static device mappings:
0xf9900000 - 0xf99fffff mapped at VA 0xffe00000
ULE: setup cpu 0
random: entropy device external interface
mem: <memory>
nfslock: pseudo-device
crypto: <crypto core>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
random: harvesting attach, 8 bytes (4 bits) from nexus0
ofwbus0: <Open Firmware Device Tree>
qcom_smem0: <Qualcomm Shared Memory Manager> on ofwbus0
qcom_smem0: Found SMEM resource: base 0xfa00000, size 0x200000
qcom_smem0: Found SMEM resource: base 0xfc428000, size 0x4000
random: harvesting attach, 8 bytes (4 bits) from qcom_smem0
simplebus0: <Flattened device tree simple bus> on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from simplebus0
random: harvesting attach, 8 bytes (4 bits) from ofwbus0
syscon0: <syscon> mem 0xf9011000-0xf9011fff on simplebus0
random: harvesting attach, 8 bytes (4 bits) from syscon0
syscon1: <syscon> mem 0xfd484000-0xfd485fff on simplebus0
random: harvesting attach, 8 bytes (4 bits) from syscon1
gic0: <ARM Generic Interrupt Controller> mem 0xf9000000-0xf9000fff,0xf9002000-0x
f9002fff on simplebus0
simplebus0: no default resources for rid = 0, type = 1
gic0: pn 0x0, arch 0x2, rev 0x0, implementer 0x70 irqs 416
random: harvesting attach, 8 bytes (4 bits) from gic0
apq8084_gcc0: <Qualcomm GCC Driver> mem 0xfc400000-0xfc403fff on simplebus0
apq8084_gcc0: PCIE1 GDSC enabled
random: harvesting attach, 8 bytes (4 bits) from apq8084_gcc0
generic_timer0: <ARMv7 Generic Timer> on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
random: harvesting attach, 8 bytes (4 bits) from generic_timer0
gpio0: <Qualcomm APQ8084 pin control and GPIO configuration driver> mem 0xfd5100
00-0xfd513fff on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
random: harvesting attach, 8 bytes (4 bits) from gpiobus0
random: harvesting attach, 8 bytes (4 bits) from gpio0
qcom_spmi0: <APQ8084 SPMI arbiter driver> mem 0xfc4cf000-0xfc4cffff,0xfc4cb000-0
xfc4cbfff,0xfc4ca000-0xfc4cafff on simplebus0
qcom_spmi0: SPMI Arbiter: Found HW Version-1 (0x20000002)
qcom_spmi0: SPMI Arbiter: found pmic with usid 00
qcom_spmi0: SPMI Arbiter: found pmic with usid 01
random: harvesting attach, 8 bytes (4 bits) from qcom_spmi0
qcom_pma80840: <Qualcomm PMA8084 placeholder driver> on qcom_spmi0
qcom_pma80840: 6: qcom,pma8084 v2.1
random: harvesting attach, 8 bytes (4 bits) from qcom_pma80840
qcom_pma80841: <Qualcomm PMA8084 placeholder driver> on qcom_spmi0
random: harvesting attach, 8 bytes (4 bits) from qcom_pma80841
pma8084_gpio0: <PMA8084 pin configuration and GPIO> on qcom_pma80840
pma8084_gpio0: PMA8084 gpio controller is using usid 0
random: harvesting attach, 8 bytes (4 bits) from pma8084_gpio0
qcom-spmi-regulator0: <PMA8084 regulator> on qcom_pma80841
qcom-spmi-regulator0: PMA8084 regulator is using usid 1

random: harvesting attach, 8 bytes (4 bits) from qcom-spmi-regulator0


qcom_sataphy0: <Qualcomm 6Gbps SATA PHY driver> mem 0xfc581000-0xfc5813ff,0xfd4a
b20c-0xfd4ab20f on simplebus0
apq8084_gcc0: RCG updated 0x00001C5C
apq8084_gcc0: Clock branch 0x00001C4C enabled
random: harvesting attach, 8 bytes (4 bits) from qcom_sataphy0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: missing 'clock-frequency' property
random: harvesting attach, 8 bytes (4 bits) from cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu1: missing 'clock-frequency' property
random: harvesting attach, 8 bytes (4 bits) from cpu1
cpu2: <Open Firmware CPU> on cpulist0
cpu2: missing 'clock-frequency' property
random: harvesting attach, 8 bytes (4 bits) from cpu2
cpu3: <Open Firmware CPU> on cpulist0
cpu3: missing 'clock-frequency' property
random: harvesting attach, 8 bytes (4 bits) from cpu3
random: harvesting attach, 8 bytes (4 bits) from cpulist0
pmu0: <Performance Monitoring Unit> on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from pmu0
simplebus0: <timer@f9020000> mem 0xf9020000-0xf9020fff compat arm,armv7-timer-me
m (no driver attached)
simplebus0: <power-controller@f9089000> mem 0xf9089000-0xf9089fff,0xf9009000-0xf
9009fff compat qcom,apq8084-saw2-v2.1-cpu (no driver attached)
simplebus0: <power-controller@f9099000> mem 0xf9099000-0xf9099fff,0xf9009000-0xf
9009fff compat qcom,apq8084-saw2-v2.1-cpu (no driver attached)
simplebus0: <power-controller@f90a9000> mem 0xf90a9000-0xf90a9fff,0xf9009000-0xf
9009fff compat qcom,apq8084-saw2-v2.1-cpu (no driver attached)
simplebus0: <power-controller@f90b9000> mem 0xf90b9000-0xf90b9fff,0xf9009000-0xf
9009fff compat qcom,apq8084-saw2-v2.1-cpu (no driver attached)
simplebus0: <power-controller@f9012000> mem 0xf9012000-0xf9012fff compat qcom,sa
w2 (no driver attached)
simplebus0: <clock-controller@f9088000> mem 0xf9088000-0xf9088fff,0xf9008000-0xf
9008fff compat qcom,kpss-acc-v2 (no driver attached)
simplebus0: <clock-controller@f9098000> mem 0xf9098000-0xf9098fff,0xf9008000-0xf
9008fff compat qcom,kpss-acc-v2 (no driver attached)
simplebus0: <clock-controller@f90a8000> mem 0xf90a8000-0xf90a8fff,0xf9008000-0xf
9008fff compat qcom,kpss-acc-v2 (no driver attached)
simplebus0: <clock-controller@f90b8000> mem 0xf90b8000-0xf90b8fff,0xf9008000-0xf
9008fff compat qcom,kpss-acc-v2 (no driver attached)
simplebus0: <restart@fc4ab000> mem 0xfc4ab000-0xfc4ab003 compat qcom,pshold (no
driver attached)
simplebus0: <hwlock> compat qcom,tcsr-mutex (no driver attached)
simplebus0: <memory@fc428000> mem 0xfc428000-0xfc42bfff compat qcom,rpm-msg-ram
(no driver attached)
gpioc0: <GPIO controller> on gpio0
random: harvesting attach, 8 bytes (4 bits) from gpioc0
uart0: <Qualcomm HSUART> mem 0xf995e000-0xf995efff on simplebus0
uart0: console (-1,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCDinvalid
random: harvesting attach, 8 bytes (4 bits) from uart0
ahci0: <SATA AHCI Glue Layer> mem 0xfc580000-0xfc58017f on simplebus0
apq8084_gcc0: Clock branch 0x00001C44 enabled
apq8084_gcc0: Clock branch 0x00001C48 enabled
apq8084_gcc0: RCG updated 0x00001C80
apq8084_gcc0: Clock branch 0x00001C50 enabled
apq8084_gcc0: RCG updated 0x00001C5C

apq8084_gcc0: Clock branch 0x00001C4C enabled


qcom_sataphy0: SATA PHY powered up in functional mode
apq8084_gcc0: RCG updated 0x00001C94
apq8084_gcc0: Clock branch 0x00001C54 enabled
apq8084_gcc0: RCG updated 0x00001CA8
ahci0: Max available SATA ports: 1
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported
ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 6Gbps PM PMD SSC PSC 32cmd CCC 1ports
ahci0: Caps2: SADM SDS APST
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
random: harvesting attach, 8 bytes (4 bits) from ahcich0
random: harvesting attach, 8 bytes (4 bits) from ahci0
msm_sdhci0: <Qualcomm SDHCI controller> mem 0xf98a4900-0xf98a4a1b,0xf98a4000-0xf
98a47ff on simplebus0
msm_sdhci0: Host Version: 0x45020000 Vendor Version 0x45
msm_sdhci0: MCI Version: 0x00000045, major: 0x0000, minor: 0x45
msm_sdhci0: Enabling 4BIT caps
msm_sdhci0-slot0: 200MHz HS 8bits 3.3V 3.0V PIO
msm_sdhci0-slot0: ============== REGISTER DUMP ==============
msm_sdhci0-slot0: Sys addr: 0x00000000 | Version: 0x00004502
msm_sdhci0-slot0: Blk size: 0x00004000 | Blk cnt: 0x00000000
msm_sdhci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
msm_sdhci0-slot0: Present: 0x01f90000 | Host ctl: 0x00000000
msm_sdhci0-slot0: Power:
0x00000000 | Blk gap: 0x00000000
msm_sdhci0-slot0: Wake-up: 0x00000000 | Clock:
0x00000003
msm_sdhci0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
msm_sdhci0-slot0: Int enab: 0x01ff80fb | Sig enab: 0x01ff00fb
msm_sdhci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
msm_sdhci0-slot0: Caps:
0x3329c8b2 | Max curr: 0x00000000
msm_sdhci0-slot0: ===========================================
msm_sdhci0: Set gpio pin for card detection
mmc0: <MMC/SD bus> on msm_sdhci0
random: harvesting attach, 8 bytes (4 bits) from mmc0
random: harvesting attach, 8 bytes (4 bits) from msm_sdhci0
qcom_pma80840: <rtc@6000> compat qcom,pm8941-rtc (no driver attached)
qcom_pma80840: <mpps@a000> compat qcom,pma8084-mpp (no driver attached)
simplebus0: <pci@fc528000> mem 0xfbffe000-0xfbffefff,0xfbfff000-0xfbffffff,0xfc5
28000-0xfc528fff type pci compat qcom,pcie-apq8084 (no driver attached)
ofwbus0: <smd> compat qcom,smd (no driver attached)
cryptosoft0: <software crypto>
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0


crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
procfs registered
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
IPsec: Initialized Security Association Processing.
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
msm_sdhci0-slot0: Divider 250 for freq 400000 (base 200000000)
mmc0: Probing bus
ahcich0: AHCI reset...
ahcich0: SATA connect timeout time=10000us status=00000000
ahcich0: AHCI reset: device not found
mmc0: SD 2.0 interface conditions: OK
mmc0: SD probe: OK (OCR: 0x40ff8000)
mmc0: Current OCR: 0x00ff8000
mmc0: Probing cards
mmc0: New card detected (CID 4134325344313647305b552a4300f700)
mmc0: New card detected (CSD 400e00325b590000751f7f800a400000)
mmc0: Card at relative address 0x0001 added:
mmc0: card: SDHC SD16G 3.0 SN 5B552A43 MFG 07/2015 by 65 42
mmc0: bus: 4bit, 50MHz, high speed timing
mmc0: memory: 30703616 blocks, erase sector 8192 blocks
mmc0: setting transfer rate to 50.000MHz (high speed timing)
msm_sdhci0-slot0: Divider 2 for freq 50000000 (base 200000000)
mmcsd0: 16GB <SDHC SD16G 3.0 SN 5B552A43 MFG 07/2015 by 65 42> at mmc0 50.0MHz/4
bit/65535-block
random: harvesting attach, 8 bytes (4 bits) from mmcsd0
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/mmcsd0s2 [rw]...
GEOM: new disk mmcsd0
mmc0: setting bus width to 4 bits
GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-5B552A43, MBR) is not aligned on 4194304
bytes
GEOM_PART: partition 2 on (diskid/DISK-5B552A43, MBR) is not aligned on 4194304
bytes
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
Setting hostuuid: 180b54c5-3229-11e6-9d1c-29c34bce7799.
Setting hostid: 0x12188381.
No suitable dump device was found.
Starting file system checks:
/dev/mmcsd0s2: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mmcsd0s2: clean, 3549453 free (181 frags, 443659 blocks, 0.0% fragmentation
)
GEOM_PART: partition 1 on (diskid/DISK-5B552A43, MBR) is not aligned on 4194304
bytes
GEOM_PART: partition 2 on (diskid/DISK-5B552A43, MBR) is not aligned on 4194304
bytes

Mounting local file systems:.


Setting hostname: ifc6540.
gic0: Spurious interrupt detected: last irq: 19 on CPU0
Setting up harvesting:[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MO
USE,KEYBOARD,ATTACH,CACHED
Feeding entropy:random: unblocking device.
.
Starting Network: lo0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Soft Float compatibility ldconfig path:
Starting devd.
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Performing sanity check on sshd configuration.
Fssh_key_load_public: invalid format
Could not load host key: /etc/ssh/ssh_host_rsa_key
Starting sshd.
Fssh_key_load_public: invalid format
Could not load host key: /etc/ssh/ssh_host_rsa_key
Starting cron.
Starting background file system checks in 60 seconds.
Fri Aug 5 09:39:31 UTC 2016
FreeBSD/arm (ifc6540) (ttyu0)

login:

Você também pode gostar