Samsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0

Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 results Samsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or

WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.

On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.

Enable Developer Mode

Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names

Click the + at the top right

APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked

Default Access = [Grant]

Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,

Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu

Select [1] Setting

Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.

5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None

APN Type = default,mms,supl

APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging

Disable Verify apps :

Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation

Enable SIP and Disable Encryption

In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup

Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup

Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e

Press the "Start" button on the Odin window

Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.

3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3

At repeated errors, contact Ascom global help desk (See below).

Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption

Algorithm" (scroll to bottom) Set to "none"

Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting

Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.

c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.

3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService

s have loaded (this process can take a few moments to load

all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat

ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],

however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear

Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.

iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:

Download the Installer file from Confluence-TEMS Files

Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930

Reference: 4551133939, SO-00007911

Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF

Select [5] LTE B12 ON/OFF

Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.

9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or

connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :

Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)

Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d

isable Samsung Knox

Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.

a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.

If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)

Select IMS Information -> VoLTE Call (Turn On)

YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:

Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.

a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot

her settings remaining on default:

i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com

be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.

Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"

Power off Device

Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.

vii.
viii.
Name = TMO Testing
IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope

ning the application a few times) now click "install". The

application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:

Product NameTEMS Investigation - Device ODM

SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.

3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.

3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC

Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if

doesn't work attempt others in new shortcut)

Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.

3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung

Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.

3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU
Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t

Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati

onMenu" (There may be 3 listed, select the one with no

spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.

a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New

Additional APN
The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.

iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco

m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00

00 (four zeros) and hit OK

Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"

Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com

MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
SuperSU Suggested to change the settings on SuperSU to the following with the ot
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:

Go to Settings -> General -> About phone

Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files
but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.
3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup

Samsung Avant (G386T) TEMS Investigation Setup

Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad
ed via latest OTA to NK3 or higher
instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M

ode". It should show in the Odin menu as a

"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
AnyCut
This is a simple application to create shortcuts on the screen for menus
and activities
ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.

a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.
b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.
Suggested to change the settings on SuperSU to the following with the ot
SuperSU
her settings remaining on default:
i.
ii.
iii.
iv.
v.
Enable Superuser = Checked
Re-Authentication = Un-Checked
Default Access = [Grant]
Enable su during boot = Checked
Trust sytem user = Checked
Install ODM call control Software:
Download the Installer file from Confluence-TEMS Files
Run the installer file "Samsung_Galaxy_Avant_SM-G386T_installer-1.0.0.7"
Put the device is mode
The device will be detected (if it is not detected, please retry closing and ope
ning the application a few times) now click "install". The
application will prompt when the Installation is complete
Configure the device with required settings:
If not already enabled, enable developer options menu and USB debugging by:
Go to Settings -> General -> About phone
Click on Build number until developer mode is enabled (click ~7 times)
If not already enabled, enable USB debugging by
Go to Settings -> General -> Developer options and enable USB debugging
Disable Verify apps :
Go to Settings -> General -> Security
Uncheck Verify apps
Disable Collect Diagnostics :
Go to Settings -> General -> Backup and reset -> Collect diagnostics
Uncheck Allow Diagnostics
Temsify the device:
Connect only one device to the PC
Ensure Device is MTP+ADB (On device dialer *#0808# Then MTP+ADB and reboot)
Accept in the device (a popup) to connect ADB to the PC
Run the wanted version of the installer and follow instructions. The device reboot
s after successful TemsificationConfluence-TEMS Files

but may also reboot in the middle of the process. The process takes a few minute
s. If for some reason nothing happens check the screen
on the device and accept the device request.
If the error in the picture below happens, start again from step 3
At repeated errors, contact Ascom global help desk (See below).
Verify Temsification:
On the device, go to Home -> Apps and look up TEMS Firmware Version app.
Start the TEMS Firmware Version app.
If it does not exist of if the app does not display the firmware version number,
please repeat step 3 Temsify the device above.
If the verification fails in spite of one repetition, please contact TEMS Suppor
t
Licensing
Ascom GHD will administer the licensing for ODM and assign the device to the lic
ense server. To ensure the device is registered, please restart
the device multiple times while the device is connected to either the network or
WiFi with data. Browse the internet after each reboot to verify.
Email Ascom as per the template below to create a ticket. Once you have received n
otice that the license/s the device/s are ready to go. Once
the device has booted (make sure data services are working). The OnDeviceService
s have loaded (this process can take a few moments to load
all of the services) open the TEMS License application.
Email Customer Care TEMS and CC with the following. The HostID needed maycustom
ercare.tems@ascom.com RFAssurance@T-Mobile.com
be found on the device by going to the TEMS License application and expanding the I
nfo section.
Note
This must come from a Email address. Any other email will not be processed by Asco
m.XXXXXX@T-Mobile.com
Email Template
Subject: TMO ODM License Request
Hello GHD,
Please open a ticket for T-Mobile USA. CC: on this SR as well as the people on the
CC: line of this email.rawle.smith@ascom.com
Included is the IMEI of the device.
Account: T-Mobile USA (89429) -- 85usSO-*7930
Reference: 4551133939, SO-00007911
Name:
Email:
Phone:
Product NameTEMS Investigation - Device ODM
SR Summary: TMO ODM License Request
SR Details: Please register the following for TEMS Pocket Standard Devices

IMEI
Model#
352829061233444 SM-G386T
Device Configuration to fully utilize G386T with TEMS Investigation
Enable SIP and Disable Encryption
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
Install a shortcut installation tool. " " works and is available in the Google P
layStoreAnyCut
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTE Configurat
ion Menu" (There may be 3 listed, select 2nd one, if
doesn't work attempt others in new shortcut)
Open the newly created shortcut into the VoLTE Configuration Menu" screen
1.
2.

3.
4.
5.
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> "Encryption
Algorithm" (scroll to bottom) Set to "none"
Select "IMS VoLTE Settings" -> "Bearer Settings" -> "LTE IMS PDN" -> Check the b
ox for "IPSec
Select IMS Information -> Registration (Enable)
Select IMS Information -> VoLTE Call (Turn On)
YOU MUST BACK ALL THE WAY OUT OF THE MENU AND REBOOT TO IMPLEMENT THE SETTINGS
Now you should be able to connect the device to TEMS for successful testing
Open AnyCut and create "New Shortcut" -> Activity -> Scroll to "VoLTEConfigurati
onMenu" (There may be 3 listed, select the one with no
spaces between words)
This menu allows you enable and disable VoLTE calling quickly. Use if on engineer
ing special builds to get to the menu.
On user NK3 build this is not required as can enable/disable in the Settings ->
Call menu
Enable Band 12 (LTE 700)
In order to enable the SIP messages and disable encryption, the VoLTE Configurat
ion Menu needs to be accessed. (Used to be *#IMS# [*#467#],
however may be disabled depending on build)
To Get to Main Menu, follow this process:
Open Phone, go to the dialer.
Enter *#197328640# to enter the service mode. You will land at "DEBUG SCREEN"
Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capita
l letter) and hit OK
Hit the menu key again, select "Key Input", and in the Input value box, enter 00
00 (four zeros) and hit OK
Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Enable Band 12 (From Main Menu)
Select [2] UE Setting & Info Menu
Select [1] Setting
Select [2] System
Select [9] Next Page
Select [7] LTE BAND ON/OFF
Select [5] LTE B12 ON/OFF
Select B12 Enable or Disable as desired
Back all the way out to save
Please contact RF assurance for further questions RFAssurance@T-Mobile.com

Related articles
Samsung Avant (G386T) TEMS Pocket Setup
Samsung Avant (G386T) TEMS Investigation Setup
Samsung Note4 (N910T) TEMS Investigation Setup
Samsung Note3 (N900T) TEMS Pocket Setup
Samsung Note3 (N900T) TEMS Investigation Setup
Showing first 5 of 12 resultsSamsung Avant (G386T) TEMS Investigation Setup
Setup and Licensing Instructions V1.0
Prerequisites

.
All Steps must be followed:
1.
2.
3.
4.
Updated Firmware
The Samsung Avant Device has been firmware and rooted. This document is anupgrad

ed via latest OTA to NK3 or higher

instruction how to TEMSify Samsung Avant SM-G386T UEs
OTA
Rooting
Temsfication
Root Device or Flash SAMSUNG firmware: (This information and files also availabl
e from )RFAssurance@T-Mobile.com
Root the device:
Download and install the latest Samsung device drivers to the PC from Samsung if
not already installed: <http://www.samsung.com/us/s
>upport/owners/product/SM386TZKATMB
a.
a.
Please note there have been reports of inability to download the driver from Sam
sung website with IE8. Try Firefox or Chrome
instead in this case.
Enable Developer Mode
Go to Settings -> General -> About Phone/Device
Scroll down to "Build number" and touch 7 times, message "Developer enabled" wil
l appear
Go back to Settings -> General -> Developer Options and enable "USB Debugging"
Go to Settings -> General -> Security and enable "Unknown sources" installation
Go to Settings -> General -> Security and disable "Verify apps" (uncheck)
Place the UE (G386T) into "Download Mode"
Power off Device
Restart pressing the Power+Home+Volume down button until the Download Mode is en
tered (8-10s)
Press the "Volume Up" key to verify you want to go into "Download Mode"
Download and unzip the root files from: Device Root The following files will be p
resent:
4.
a.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
Run the "Odin3-v3.07.exe" file to open the Odin Window
Connect the Samsung Avant (G386T) device to the USB cable already in "Download M
ode". It should show in the Odin menu as a
"Com" device
Select the "PDA" option on the Odin window and choose the "CF-Auto-Root.tar" fil
e
Press the "Start" button on the Odin window
Go to the device -> Applications and open the SuperSU app
If SuperSU is not in the application list, you can download from the PlayStore
Complete the rooting in the application by allowing it to install binaries and d
isable Samsung Knox
Other Useful Settings/Applications to Install
Although not required, there are some useful applications and settings that may
improve the general performance and usability of the Samsung
Avant device for TEMS and TEMS Pocket installations. There are the recommend apps
to install from the Google Play Store.
This is a simple application to create shortcuts on the screen for menus
AnyCut
and activities

ES File Explorer
This application is a file browser as well as a decent FTP prog
ram for verification of FTP Servers.
a.
b.
c.
a.
b.
c.
a.
Enable Root Browser
Settings Menu -> Tools -> Root Explorer On
Show Hidden Files
Settings Menu -> Tools -> Show hidden files On
Add T-Mobile FTP Servers
Settings Menu -> FTP -> New
Additional APN The T-Mobile FTP servers currently do not support IPv6 protocol. D
ue to this, the default APN can not be used for
data. You will need to create a new APN in the Avant and select it for use.
Go to Settings -> More networks -> Mobile networks -> Access Point Names
Click the + at the top right
APN Settings (Set only the listed, the rest are blank/default)
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
Name = TMO Testing IPv4
APN = fast.t-mobile.com
MMSC = http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC = 310
MNC = 260
Authentication Type = None
APN Type = default,mms,supl
APN protocol = IPv4/IPv6
Lookout
Suggested to complete disable lookout application. Essentially acts as a
firewall application that can stop TEMS processes or
connectivity.
4.
1.
2.
3.
a.
b.
1.
a.
b.
2.
a.
3.
a.
b.
4.
a.
b.
1.
2.
3.
4.
5.
a.

b.
1.
a.
2.
3.
Select the application in the menu and drag to disable. Agree to disable or unins
tall application.