Escolar Documentos
Profissional Documentos
Cultura Documentos
Product Specifications
PSS 21H-2X7 B4
The G06 I/A Series system metal industrial wall-mounted enclosure provides mild or severe environmental
protection and houses DIN rail mounted modules, power modules, terminals and connectors for field wiring.
FEATURES
Features of the G06 enclosure include:
Environmental protection for location in mild to
severe environments
INTRODUCTION
The G06 enclosure is specially designed for DIN rail
mounted equipment. Each enclosure can be
configured with vertically mounted Modular
PSS 21H-2X7 B4
Page 2
ENVIRONMENTAL PROTECTION
The enclosure is available with several levels of
environmental protection, allowing it to be used in a
variety of locations: indoors, outdoors, sheltered, and
harsh.
NEMA 4 Version Painted steel enclosure with
PSS 21H-2X7 B4
Page 3
ENCLOSURE OPTIONS
The G06 enclosure can be configured with the
following options:
A combination of 4 or 8-position Modular
power distribution
Bus bars for field cable shields with or without rail
isolation
A general purpose or hazardous (Class 1,
Division II and Zone 2) area certification.
A general purpose or Class 1, Division II area
designation
NEMA 4 or NEMA 4X rating
Print pocket inside front door
Ergo form S handle with push button lock.
PSS 21H-2X7 B4
Page 4
Left Interior
View
Optional
Baseplate
2-position
FCM or FCP*
Right Interior
View
Front Interior
View
Power Supply
Secondary
(P0922YU/YC)
Primary
(P0922YU/YC)
Baseplates
4 or 8-position
FBM/FCM*
PolyCarbon
Cover
Wireway
Termination
Assemblies*
* Ordered Separately
Cable
Optional I/O Shield
Entry
Earth Bus Bars
NEMA 4
Enclosure
Termination
Assemblies*
Wireway
Power Entry
Terminal Blocks (2)
(P0926DZ)
PSS 21H-2X7 B4
Page 5
Left Interior
View
Termination
Assemblies*
Wireway
Optional
Baseplate
2-position
FCM or FCP*
* Ordered Separately
Front Interior
View
Cable
Entry
NEMA 4
Enclosure
Right Interior
View
Power Entry
Termination
Optional I/O Shield Assemblies*
Terminal Blocks (2)
Earth Bus Bars
(P0926DZ)
Wireway
Baseplates
4 or 8-position
FBM/FCM*
PolyCarbon
Cover
Power Supply
Primary
(P0922YU/YC)
Power Supply
Secondary
(P0922YU/YC)
PSS 21H-2X7 B4
Page 6
F U N C T I O N A L S P E C I F I C AT I O N S
Enclosure
E N V I R O N M E N TA L S P E C I F I C AT I O N S
Ingress Protection
Altitude
OPERATING
-300 to +3,000 m (-1,000 to +10,000 ft)
STORAGE
-300 to +12,000 m (-1,000 to +40,000 ft)
Temperature
-20 to +60C
(-4 to +140F)
-20 to +50C
(-4 to +122F)
Average Loading,
166 Watts
Maximum Loading,
227 Watts
Contamination Class
NEMA 4 ENCLOSURE
Class G3 (Harsh) as defined in
ISA Standard, S71.04.
NEMA 4X ENCLOSURE
Class GX (Severe) as defined in
ISA Standard, S71.04.
Relative Humidity
5 to 95% (condensing)
Agency Certification
UL/UL-C listed and CENELEC certified.
Enclosure meets all applicable European Union
directives and bears the CE mark.
Area Designation
Per customer order, designed for General Purpose or
Hazardous area (Class 1, Division II, Zone 2).
Storage Temperature
-40 to 70C (-40 to 158F)
P H Y S I C A L S P E C I F I C AT I O N S
Construction
NEMA 4 RATED ENCLOSURE
Sheet steel with light gray, powder-coated finish
(RAL 7035).
NEMA 4X RATED ENCLOSURE
Stainless steel
Panel Thickness
DOORS - 14 GAUGE (2 MM)
HousinG - 16 Gauge (1.5 mm)
Mounting
Wall-mounting
Cable Entry
NEMA 4 RATED ENCLOSURE
Bottom or top cable entry (as shipped) plate.
NEMA 4X RATED ENCLOSURE
User must provide access ports (for top or
bottom cable entry) in keeping with maintenance
of the enclosures protection classification.
PSS 21H-2X7 B4
Page 7
P H Y S I C A L S PE CI F I C AT I O N S ( C O N T I N U E D )
Field-Wire Termination
DIN RAILS
Four DIN rails for mounting TAs. One
110 cm (43.3 in) long, two 52.5 cm (20.5 in) long,
one 20 cm (8 in) long
WIRE WAY
Two wire ways 38 mm x 75 mm (1.5 x 3.0 in) for
routing of cables.
Mass
The mass of the enclosure is dependent upon the
particular configuration. Consult with an Invensys
representative if precise mass figures are required.
MASS (EMPTY)
70 kg (154 lb)
MASS (FULLY LOADED)
Up to 91 kg (up to 200 lb) without termination
assemblies and field wiring.
D I M EN SI ON S N OM I N AL
PSS 21H-2X7 B4
Page 8
PSS Number
Description
PSS 21H-2X8 B3
PSS 21H-2W1 B3
PSS 21H-2W6 B4
PSS 21H-2W3 B4
PSS 21H-2W2 B3
MB 21A
1111