Escolar Documentos
Profissional Documentos
Cultura Documentos
551
FEATURES
The solenoid operated spool valves 3/2-5/2 have threaded port connections and
NAMUR interface
The spool valve can be used as 3/2 NC or 5/2 by turning the selector plate (located
on the bottom of the valve) 180
The valves offer environmental protection against the ingress of liquids, dust or any
other foreign matter (environmental protected execution)
Manual operator as standard
GENERAL
Differential pressure 2 - 10 bar [1 bar = 100 kPa]
Maximum allowable pressure 10 bar
Flow (Qv at 6 bar) 700 l/min (ANR)
fluids temperature range sealings
air, neutral gas, filtered -25C to +60C (1) + NBR (nitrile)
PUR (polyurethane)
CONSTRUCTION
Body Aluminium, black anodized
End covers + selector plate Glass-filled polyamide (PA/FG)
Internal parts Zamak, steel, acetal (POM), aluminium
Sealing NBR + PUR
Core and core tube Stainless steel
Shading coil Copper
Pilot exhaust Connectable (M5) 3
Coil insulation class F 2
Coil Epoxy resin
Spade plug connection coil 3 x DIN 46244 1 4
Connector Type 22, spade plug (Pg 9P)
Electrical safety VDE 0580
ELECTRICAL CHARACTERISTICS 5
Standard voltages DC (=) : 24V
(Other voltages and 60 Hz on request) AC (~) : 24V - 115V - 230V / 50 Hz
power ratings ambient
coil inrush holding hot/cold temperature protection
type ~ ~ = range (1) 3/2 5/2
(VA) (VA) (W) (W) (C)
CM22-2,5W 6 3,5 2,5 2,5 / 3 -25 to +60 moulded IP65
3/2 5/2
pipe orifice
exhaust
differential (bar)
reducer
manual
The codes in the grey shaded areas correspond to commonly used products which can be supplied rapidly
9 3
NAMUR 3/2-5/2 SOLENOID OPERATED SPOOL VALVES SERIES 551
INSTALLATION
The solenoid spool valves can be mounted in any position
Solenoid operated spool valves have 3/2-5/2 selector plate, with mounting interface according to NAMUR recommendations
Selector plate to be positionned with 3/2 or 5/2 function before mounting valve on actuator
Dowel pin (if necessary), bolts and gaskets are standard supplied
Pipe connections have standard thread according to ISO 228/1
The third digit in the catalogue number indicates the standard pipe connection
Other pipe threads are available on request
Installation/maintenance instructions are included with each solenoid spool valve
Replacement coils are available
95 2 3
2
10
A2
1 3
1 4
45
32
360
2 4
72*
49*
1
5
A1 5
ASCO/JOUCOMATIC reserves the right to alter the availability, design and specifications without notice.
24
3 4 5 == Port 1 : G1/4
Ports 3 and 5 : G1/8
7 6 8
33
19
7