Escolar Documentos
Profissional Documentos
Cultura Documentos
CARRER OBJECTIVE
Graduate engineer in Electronics and Communication with almost 2.7 years of experience in cellular
industry with knowledge in GSM BSS & Network Implementation.
Being resourceful to the organization and to learn and grow with organization.
PROFESSIONAL QUALIFICATION
B. Tech with Electronic & Communication from Marathwada Institute of Technology, Bulandshahr
completed the Degree in May 2007.
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
SUMMARY OF SKILLS:
o Over 2 years of experience of Implementation, Quality assurance & Quality control, support and troubleshooting
(Operation & maintenance) of large scale Microwave networks that includes PDH, SDH & XPIC.
o Extensive skills of microwave installation & commissioning in NEC/Telenor Microwave Backbone project and
Huawei-Ufone project
o Success story of project start-up and close down, installation commissioning and Technical documentation, time
scheduling, QA/QC, issues and change requests as well as management reporting.
PROFFESSIONAL EXPERIENCE:
InterSES, a Telecom service providing company having expertise in LOS surveys, Microwave & BTS installations,
System support, NMS designing and Transmission Planning.
o Installation & commissioning of XPIC, SDH and PDH for NEC on Telenor Phase-II/SWAP project.
o Extensive reporting, Technical documentation, conducting PAT across Pakistan as a team lead.
o Coordination with Motorola on one of worlds largest WiMAX Network implementation on extensive reporting,
documentation, installation, commissioning and troubleshooting across the Pakistan as a team lead.
o Coordinating the technical team to improve and achieve the set targets with in the given time frame.
o Primarily responsible for Quality assurance/ Quality control for NEC-Telenor project, Huawei- Ufone project and
Alcatel`Lucent- China mobile Pak project.
o Coordination with NEC on NEC/Telenor Microwave Backbone project.
o Installation, configuration and troubleshooting of XPIC, SDH, PDH for Huawei-Ufone (Etisalat) and Mobilink
(Orascam).
o Transmission planning and Link budgeting for PTML (Ufone) phase-IV and critical expansions
o Hands on experience of microwave Installation & commissioning of NEC (Pasolink & NEO), Huawei (RTN) and
Motorola (Sagem).
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Work Experience
QC Communication Engineer
Nesma & Partners Contracting Co. Ltd
-
2013
Project: 2) Sewage Treatment Plant (STP),
Position: QC Communication Engineer
Client: Saudi Aramco
Location: Thuwal-KAUST, K.S.A
From: Dec 2013 Present
Responsibilities of all communication site Inspection, as per Inspection test Plant (ITP) Preparation of
punch list supporting with subcontractor and Client daily surveillance report to QC Manager.
Day by day Inspection all construction activities and witness all Installed communication in there correct
(Installation and Location) in accordance with the drawing and project specification, rework of
Communication like conduits, cable tray, cable laying and testing, during construction and preparation of
testing report and QC record.
As per Client requirement, attend Weekly QA/QC introduction for Improvement quality on site issue non
conformity report (NCR) to sub-contractor. Proper controlling of hand over document and Technical
document for handover to Client.
Site supervision and inspection for the implementation of Telecommunication system
based on Aramco & BICSI standards. Required for the construction of Site office
Building at KAUST which includes Outside Plant and Inside Plant engineering using
FOC cable and copper cable for Voice & Data connectivity.
Scope covers Installation of Alcatel Lucent 1642 Edge multiplexer, ISDN PRI (primary rate), patch panel
& switches Interface with 30 channels for the Connection to the PABX and to the 2x100 Pairs MDF.
Created Detail engineering design package for the installation / implementation of Inside
Plant communication system, which includes structured cabling system (Horizontal & vertical
Distribution system) for Voice and Data services, Video conferencing for the following
Industrial support facilities; Administration/Office buildings, Laboratory, chlorination building,
Biological building, Security office & security Gate buildings, Transportation and Integrated
Telecom room.
Periodic Inspection for the installation of low current systems. Systems such as FIRE ALARM
DETECTION, SECURITY AND ACCESS CONTROL, IP CCTV, IP TV, IP TELEPHONY, REAL TIME
LOCATING SYSTEM, NURSE CALL SYSTEM, AUDIO VISUAL SYSTEMS, VIDEO CONFERENCING
SYSTEM, PUBLIC ADDRESS SYSTEM, AUTOMATED STORAGE RETRIEVAL SYSTEM,
STRUCTURED CABLING FOR NETWORKING, BMS.
Ensure conformance of work on-site as per standards such as (NEC, BICSI, NFPA, IEEE, Project
Specifications and others.)Assure conformance of work as per Technical Specifications and Design
Scope. Assures Material delivery and Installation as per Approved Material Standards and Conformance
Standards.
Reports Progress of work to Site management. Prepares all the Inspections and Commissioning
Procedures Documentation. Assist and Advise Site Project Engineers and Subcontractors (Technical).
Technical Review for Engineering Design and As-built. Assist and Support Project Consultant and End-
USER. Handle testing and Commissioning for all the LOW CURRENT SYSTEM. Prepares All Manuals
(Operation, Maintenance and Emergency Manuals) Required by Project.
QC Telecommuincation Engineer
Nesma & Partners contracting co ltd
-
Al Khober
2012
Responsibilities
To monitoring the ongoing daily construction activities and reviewing the construction method
statements and making comments per project specifications, procedures & ITPs.
Regular site visits for foreseeing the potential deficiencies based on his physical experience to share
with construction crew and close supervision with regards to installation, testing & precommissioning of
Communication scope of works.
Monitoring and updating the calibration of all Communication testing Equipment
And organize the preparation of communication cable test result and Instrument Loop Packages.
Imitating internal Log Book Entries/NCRs to construction crew for effective implementation of project
quality plan, ITPs, written procedures, project specifications, IFC drawings etc.
Coordination with Clients inspectors for getting the feedback for open log book entries and preparations
of corrective actions to close those violations.
Emphasizing on the control of documents and records by advising the document controllers, QC
inspectors and conducting routine internal meetings with QC Manager for further vigilance to the potential
problems which must be tackled accordingly to avoid nonconformities.
Complies with the highest level of safety during all stages of work to avoid any type of incidents and or
accidents. Take reasonable care of own health and safety and that of others in the workplace. Complies
with all statutory requirements connected with the implementation of project.
To provide leadership for inspection, testing and determining if products are conforming to the project.
Ensure that quality inspection activities are conducted, documented and communicated in
accordance with OEM manuals, ISO requirements and plant operating procedure.
Contributes to the companys quality objective in accordance with the established Quality system
And policy and also monitor the work in progress highlight any critical activity thats need particular
attention and discuss with O&M team to identify mitigating measures.
Establish the sequence of requirement for the quality of materials, quality of work, its inspection and
records. To ensure execution of work and comply fully as per standard and approved specification and to
prepare the required basic documents are ITP, WP, Calibration reports, wiring diagram, ILD, ISS, RFI, QR
and NCR.
Accomplishments
Familiar with ISO-9001 Quality control system and through knowledge of NEC, NETA, NFPA, NEMA,
ANSI/TIA/EIA, PIP, BICSI and Saudi Aramco standard related to Instrument and telecommunication QC
activities.
With excellent ability in report writing, business and technical correspondence and data analysis.
Possess team leadership, management and business administration capability and with very good
negotiation and communication skill
Skills Used
Total Experience of 7.2 years In Telecommunication Field
Well Knowledge on QA/QC activities as a QC Engineer
Excellent Management Skills and Team Work.
To supervise the operation of the QA/QC functions at project site by implementing the Project
Quality Controls Plans and Procedures in accordance with the Company QC procedures,
International standards and specific contract requirements.
QC Communication Engineer
Nesma & Partners Contracting Co. Ltd
-
Al khober
2012 2012
Project: 1) Industrial Security & control system Upgrade Program
(Haradh GOSP, Jeddah Bulk & Refinery plant)
Responsibilities:
Familiarization with the job specification and review all documentation associated with communication
including Inspection & Test Plans (ITP), Procedures, Method of Statements, Vendor Documentation and
Maintenance and Operations Manuals relative to the topsides modules.
Periodic inspection for the Installation of underground and above ground conduits, cable trays, duct
banks, power, communication, control and instrument cables.
As a QC Communication Engineer with project management experience, enjoy tackling and completing
challenging assignments independently or as part of a team and review the Design, Integration, and
Implementation, construction and Commissioning of various communication & Security systems (voice,
data, and Audio &Video Conference and other low-voltage control). Responsible for the FEED & Detailed
engineering of new & or the integration of existing system, LAN/WAN, SDH, Siemens OTN, VSAT system,
PABX system & installation of Optical Fiber & Copper cables and Security Systems (CCTV, Access
control, IDAS, LRC, RADAR, Radio frequency identification system-RFID).
Thorough knowledge of ANSI/TIA/EIA, ISO standards as well as BICSI standards ast they relate to the
Communications Infrastructure and Establish the sequence of requirement for the quality of materials,
quality of work, its inspection and records.
Project proposal & detail design engineering for the installation of new IDAS (Intrusion
Detection and assessment system), CCTV system and Radio Frequency Identification system (RFID).
The scope will cover the installation of Optical fiber cable and Data communication facilities to the various
Security facilities / Buildings Replace existing non functional FIDS (Fence intrusion detection system) with
a new IDAS (Intrusion detection and assessment system).
The scope will cover the installation of all field devices (Microwave intrusion detection system (MIDS),
CCTV & Fiber optic fence sensor system (FOFSS) cable within the 4&10km perimeter & demolition of
existing Fence intrusion detection system (FIDS). Detail design of communication facilities at IDAS
building, Equipment shelters & Field. Equipment cabinets and connecting it to the Field devices using
Single-mode & Multimode Optical fiber cables.
Detail design for the impletion of structured cabling system for Guardhouses, SACS
Equipment rooms (Security Access Control system) visitor office, Break Rooms & DCO, Based on
ARAMCO and BICSI standards. Scope includes installations of FOC and Copper cables for
Voice and Data connectivity and provides new CCTV Long range cameras and RADAR.
QC Communication Engineer
Al-Khaldi Est
2011 2008
Project: 4) King Abdullah University Science & Technology (KAUST), K.S.A
Client: Saudi Aramco/ Saudi Bin Laden Group (SBG)
Familiar with international standards like IEC, IEEE, NEMA, NFPA 70 / NEC, UL standards. Conducts
/inspects all voice/data communication outlet inside the building. Conducts/inspects all
telecommunications conduit inside the building. Conducts/inspects all telecommunication pull box ad
cable rays.
periodic inspection for the installation of structured cabling system for Guardhouses,
SACS Equipment rooms (Security Access Control system) visitor office, Based on
ARAMCO and BICSI standards. Scope includes installations of FOC and Copper
cables for Voice and Data connectivity and provides new CCTV cameras and RADAR.
Site supervision and inspection for the implementation of Telecommunication system
Based on Aramco & BICSI standards. Required for the construction of Site office
Building at KAUST which includes Outside Plant and Inside Plant engineering using
FOC cable and copper cable for Voice & Data connectivity. Scope covers Installation of Alcatel Lucent
1642 Edge multiplexer, ISDN PRI (primary rate), patch panel & switches
Interface with 30 channels for the Connection to the PABX and to the 4x100 Pairs MDF.
Review the engineering designing package for the installation / implementation of Inside
Plant communication system, which includes structured cabling system (Horizontal & vertical
Distribution system) for Voice and Data services, Video conferencing and Audio Visual system,
Public Address (PA) and fire alarm system for the following Industrial support facilities;
Administration/Office building, Research Park, Theatre building, Galleria, Morc building, School, Yatch
Club, Security office & security Gate buildings, Transportation and Integrated Telecom room.
QC Telecom site Inspector
Scubes inc India pvt ltd
2008 2007
Inspection of all kind communication equipment Installation verifying all activity carried out according to
approved Installation IFC drawing/ Standard. Preparing surveillance reports for all types communication
activities at site inspection for the cable Installation includes trench and tray Installation, preparation
punch list for vendor package items/skid. Witnessing all kinds of testing and configuration of
communication switches and server etc.
Periodic inspection of structured cabling system and installation of ground base and Building telecom
tower (H-Pole, Delta pole and wall mount pole) materials and inspect the installation of tower and antenna
(RF, Microwave). Inspect the termination of RF and Co-axial cables with the RF and Micro wave antenna.
Inspect the cables tray and inspect the grounding and bounding of cables tray, antenna and telecom
tower and equipment. Inspect the BTS (Base trans receiver station), battery backup, power supply, cable
ladder, cables runway, lighting system, fire alarm system, access door and TMGB inside the FES(field
equipment shelter). To supervise the works, working with the foreman(without getting directly involved
with the site work) to ensure that all activity relative to his discipline are constructed in accordance with
Client's requirement. To discuss any specification concessions required with the project Manager/project
engineer prior to the formal submission to client.
General
Inside Plant (ISP) & Data Communication System:
Detail engineering design to effect the construction and implementation of the
Voice/Data network system (Horizontal & vertical distribution system) / structured
Cabling system (Belden/CDT, NORDX & Avaya) as per Saudi Aramco telecom standard
SAES-T-916, EIA/TIA-568, EIA/TIA-569, BICSI-TDM Manual.
Provide, develop and implement all facets of the Network Infrastructure-physical layer.
Detailed design of Telecommunication rooms / enclosures, in compliance with BICSI TDM
manual code, as per Saudi Aramco standards.
Detail design of LAN / WAN which includes Logical diagrams/Wiring diagrams for Data
Connectivity using Alcatel, Cisco, Marconi switches (ATM).
VSAT system connectivity.
Develop detail engineering design and installation of Alcatel Lucent 1511BA Multiplexer
(PDH) and Alcatel Lucent 1642 Edge multiplexer (STM-1 Optical multi-service Node) to function as a
multiplexer to handle fast Ethernet and E1 connection and to interface with
existing SDH systems (Alcatel-1660SM).
Develop configuration and layout design of Telecom and Voice/Data equipment cabinets,
Frames relay racks and pathways and spaces.
Detail design and installation of Telecommunication grounding system, in compliance
With Saudi Aramco Telecommunication standard-795 and EIA/TIA-607.
Preparation of project proposals, Construction scope of work & specifications, material
take off, site surveys for various communication projects.
Paging system:
Created design drawings, installation and test procedures for In-plant party paging system
(Gai-tronics) as per SAES-T-481 (Powered in-plant communications system).
////////////////////////////////////////////////////////////////////////////////////////////////////////////
To May 2012
To January 2009
India
Worked as a telecom engineer in I & C department for ASTER TELE SERVICE PVT LTD, KOCHI
and BANGALORE from 2007 to 2009.
This project includes the installation of new manholes in the Aramco community to provide proper
underground communication facilities.
It includes proper lying and pulling of new fiber and copper cables those are playing key role in the
communication facilities.
It includes installation of different fiber optic equipments which are required for the voice and data
communications.
The major activities of this project are telecommunication of new fiber and copper cables at
manholes and the communication control rooms.
This project includes the laying of new fiber optic cable and construction of new concrete
encasements at outside the plant as per the drawings provided by the Saudi Aramco.
This project includes the installation of mini exchange and installation of different Tele
Communication equipments for a proper voice transmission between the central control office
haradh GAS PLANT and different divisions of haradh PMT office.
The key role of communication engineer in this project is to verify all required communication
equipment to be used for installation and maintain the Saudi aramco standards like SAES-T-911, for
the communication construction activities and SAES-T-913 for the inside communication facilities
like placing underground manhole facilities to place cable trays, equipment racks, grounding
facilities. SAES-T-624, SAES-T-628, SAES-T-634 standards for splicing and testing of new fiber
cable and copper cable.
3. COMMUNICATION FACILITIES FOR THE HAWIAH GOSP-2 CCR BUILDING -SAUDI ARAMCO
This project includes the laying of new direct buried fiber optic cable between the CCR buildings to
the adjacent buildings.
The main scope of work in this project is termination of the copper and fiber cables at the existing
pedestals placed at the different locations in the GOSP PLANT.
Installation of required new equipment at CCR building and the adjacent buildings, termination and
testing of new fiber cable.
The key role of communication engineer is to assure the quality management in the project and
maintain the required quality management documents as per the Saudi aramco telecommunication
standards like SAES-T-911, for the outside communication construction activities and SAES-T-913
for the inside communication facilities like placing underground manhole facilities to place cable
trays, equipment racks, ground facilities.SAES-T-624, SAES-T-628, SAES-T-634 splicing and testing
of new fiber cable.
4. COMMUNICATION FACILITIES FOR THE KHUFF AND JAUFF GAS WELLS-SAUDI ARAMCO
In this project the main scope of work is to provide the communication facilities for KHUFF gas and
JAUFF gas wells in the different production areas of the Saudi Arabia.
This project includes the both outside and inside communication facilities which are necessary to
provide the data and voice communication between the CCR of GAS PLANTS and the different GAS
WELLS.
In this system fiber optic cable is working as a backbone communication media by which a GAS
WELL can operate automatically through the SCADA, RTU AND PLC system.
In outside the major activities are installation of concrete encasement, direct buried fiber cable
lying, marker post installation as per the standards SAES -T-911, SAES-T-624 and insatallation of
pedestal and the telephone box together with the telephone handset at choke valve well head area
of the gas wells and the lying of underground 6 pairs copper cable as per the standards SAES-T-
628.
In inside the major activities are installation of communication cabinet and the conduitsystems for
proper arrangement of fiber cables, equipment like OTN (Multiplexer), MOXA (Ethernet switching
device), ATA (analog telephone adapter) & splicing testing of a fiber cables as per the standard
SAES-T-624, SAES-T-628, SAES-T-634.
This scope of work is done for the more than 150 wells in my presence under the base of
subcontracting from CAT, RHM, FMQ, SRB, MACE companies.
The main scope of work for this company is installation and commissioning of GSM communication
system for airtel, hutch, reliance and idea.
Installation of GSM towers, GSM indoor and outdoor requirements like BTS, GSM antenna and
microwave antennas, rectifiers and power generator and dc battery system..etc.
Installation of ground base tower and roof top tower for implementation of both GSM and CDMA
techniques.
Installation of BTS (Base terminal station), power supply and DC battery and rectifier systems,
outdoor microwave antenna with microwave radio system by using RF & IF cables.
Analysis and trouble shoot the BTS related problems and microwave frequency link processing and
network fault finding analysis.
Installation and rectify the BTS alarm and rectifier alarm system