The flashlight circuit board is an experiment that we built the
basic form of the normal circuit that we usually see in the daily life. By doing it, we use the knowledge from the physic about the electricity to make it working. For example, we use the parallel and series circuit and some formula for making this cycle. This experiment give the student the new experience in learning the electrical, and it can adapt to be the useful skill for the student in the future. Procedure
1. Prepare the materials: 2 resister, 1 switch, and 1 LED
2. Tape the circuit model paper with the future board 3. Bore the future board for each material. 4. Put two resister in the end of circuit 5. Put the switch in the top right hole, and place in the LED light in the top left hole. 6. Turn to the back of future board and connect all of them together. 7. Charge the electricity from the battery into the circuit. Place the black line with the switch and place the red line with the third hole under the switch.
Physic
In this experiment, the circuit use part of physic to make it
working. First, we charge the electricity from the battery into the circuit. In term of physic, when we say open it mean the light will turn off, but when we close the metal that make the current flow will touch each other and make the light turn up. So, charging the electricity in the circuit will make the current start to flow around, and the light will light up. Moreover, missing just one part of the element will make the circuit cant perform. For example, if the voltage equal zero, the current will mean zero too. (V=IR)
Summary
From the experiment, it gives me a lot of information about
the electrical that we can easily see in our real life. So, it makes me more understand the way formula come from and how different type of circuit working. Moreover, building this experiment help me to be more careful and patient.