Escolar Documentos
Profissional Documentos
Cultura Documentos
One is working in X-
dimension and other is working in Y-dimension. The joystick allow us to measure
the movement of the stick in 2-dimension. Potentiometers are variable resistors
and, in a way, they act as sensors providing us with a variable voltage drop
depending on the rotation of the device around its shaft. The kind of program
that we need to monitor the joystick has to make a polling to two of the analog
pins.
We can send these values back to the computer, Arduinos DAC (Digital to Analog
Converter) has a resolution of 10bits. In other words this means that our sensors
are characterized with a value between 0 and 1024.
Now this is a question that how joystick producing value. As I have explained that
there are specific resistance changes with change of direction (movement of
joystick). As resistance changes with movement along x-direction.
Flame Sensor:
The flame sensor use to detect the presence of flame or fire, when the flame sensor senses there are
key signal detected, LED lights, otherwise off.
Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive 60 degree
detection sensor.
Two outputs mode:
AO: analog output- real-time output voltage signal on the thermal resistance
DO: when the temperature reaches a certain threshold- the output high and low signal threshold
Projects:
1. Clubs , Market
2. Toys
3. Neopixal strips
4. Screen