Escolar Documentos
Profissional Documentos
Cultura Documentos
table with different values of the light levels at each point of local positioni
ng. Clicking on "next", the window of "Delivering Results" with the following:
Select outputs (results), show home project, luminaire data sheet, summary, pro
tocol input coordinate list of luminaries. Luminaire data sheet with the introdu
ction of polar diagram and diagram UGR. Classification of lights, with the ICD.
Other configurations (outputs standard values UGR)
If you click on "Next" on the last page, it opens the wizard completion window.
Clicking on "Finish", the window of "Start calculation". In the section on calcu
lating scenes can be selected from: Scene. Calculate also furniture. Calcu
late also luminaries.
In the buttons in this section you can: Select all precincts. Calcul
ations also furnished in all precincts. Perform calculations with lights in all
precincts. Deselect all precincts. Cancel the calculation furniture in all preci
ncts. Cancel the calculation with lights in all precincts.
At the option of "Calculus" can select from: Standard (calculus recommended)
. Very accurate (long calculation times.)
In the calculation procedure option, you can choose between:
9
The DIALux 4.2, has a large number tabs which has a fast access to the civil def
endants.
4.1.VENTANA CAD. The window lets you work with 3D CAD. and flat with a view (sid
e view, front view and view of the plant). The 3D view is solved with a conical
perspective of the subject of lighting design. CAD window is used to facilitate
interactive planning of lighting. Using the mouse cursor can: Identify
and activate local elements and lighting. Use the Zoom. Rotate the premises. Mo
ve it. Move around the room.
With the middle mouse button you have access to the "PAN" or "MOVE"wheel with t
he same access to the "ZOOM." 11
The right mouse button can be used for, if it is a click within the image of the
local: Resize. Turn the premises. Select local objects.
Also serves right, if it is a click off the image of the local: Inse
rt lamps. Develop local geometry. 3D views. Plan view. Save camera view. Reset c
amera view.
If you make a click with right mouse button in the project tree on the name of t
he project can access the following menu: Insert lamps. Develop lo
cal geometry. Edit building in daylight. Calculate. Insert light scene. Insert t
he control group. Standard view 3D. Plant. Duplicate local. Clear. Chang
e of name.
When you open multiple windows of CAD all can be ordered through the Window menu
command. OBJECTS. With the right mouse button can be on the menu that appears,
go to the order is select, then press 12
on the blue button, red or green, proceed to move the item that has been introdu
ced in the premises. The blue button allows a movement in the plane of the floor
of the premises. With the red button is a shift on the transverse vertical plan
e of the object. With the green button you can move the object on the longitudin
al vertical plane of the object. By a click on the gray axis system that appears
in the center of gravity of the object, you can move indoors. 4.2.ÁRBOLES. The
project tree allows quick work of the elements when planning your lighting. The
information in the project tree is complemented by the one in the Inspector. The
project tree is accessed by a click on the tab of "Pro .." In the project tree
provides information about: luminaires used. The name of the project.
NAME OF PROJECT. If you make a click on the name of the project the following me
nu appears: Plano useful. Soil. Ceiling. Wall surface. Luminaires. F
urniture.
At the same time under "Area of Walls" is broken down into: Wall 1. Wall
2. Wall 3. Wall 4.
When the local plant is square or rectangular, when the plant has more sides are
more walls. 13
In the section on "Lighting", the menu information on the disposition of the lig
hts (in the example "available in picture) and the type of luminaire used. In th
e section "Furniture", provides information on the furniture that have been made
on the premises. LUMINAIRES SELECTION. To select the luminaries of the project
is to resort to the use of tree lighting catalogs. The catalog tree is decompose
d into: User Database. If you double "click" on the poster for "User Database"
, a window where demand information on the fixture that we made to the lighting
project.
The window "User Database" devotes a tab for general information: a) Manufacture
r. b) Name of the luminaire. c) Type of the fixture. d) Image of the fixture and
photometric curves of the same. e) Report on whether it is or is not registered
. Also the window "User Database" tab has the "Lights" and "other things", which
calls for information about the type of lamps and the manufacturer, for example
. Catalogs DIALux. This section shows the list of catalogs which have already
been installed plugin in DIALux. This section also has a sub section with a list
of plugin that can be installed in the application. Catalogs On Line. Clicking
this paragraph, see the list of catalogs that have been installed in the applica
tion after making a "click" on "on line" and then on the drop-down menu on "upda
te on line. Archives of lights. With this order we can send data to a directory
on your hard drive. Latest appliances utilized. DIALux is taking note of the fix
tures we use and saves them in a list to facilitate their possible reuse.
14
When it comes to selecting a particular fixture, you can see how the plugin wind
ow of each manufacturer sets different ways of incorporating the fixture to the
project. Once upon such incorporation, the selected fixture is featured in the p
roject tree in the section "used lights." TREE OF FURNITURE. Mode using "Drag &
Drop" you can move furniture furniture tree window DIALux CAD of 4.2.In the tre
e of furniture has the following sections: Figure standard. This section provi
des a series of figures (cylinders, cones, etc..), With which it is possible to
construct a complex volumetric scene. Elements of the environment. Vaults, beams
, ramps, etc. can be added to the stage lighting to enhance the realism of it. W
indows and doors. This section is devoted to doors, windows and skylights. These
elements can be incorporated onto the stage to illuminate the way using "Drag &
Drop." Elements of exterior scene. Surface escape. Calculation points. Archives
of furniture.
TREE TEXTURES. You can use the tree textures to modify the appearance of surface
s using mode "Drag & Drop", in the same way that they move the furniture out the
window of DIALux CAD 4.2. In the tree textures can find predefined textures, co
lors and textures can also use personal. Custom Textures are loaded as follows:
In the menu "file" is going to the command "import", to appear in the dropdown
menu order of "texture file." Once in "texture file", or select one of the stor
ed or browse to find a proper texture. When the texture is located, is given the
order to go to menu "select destination directory." Selecting Indoor, and then
wall and accept the selected texture is stored. By the way "Drag & Drop" can be
loaded into the walls of the new texture.
In the inspector sets the value of reflection from the texture through RGB. Also
in the inspector can determine the actual size of the texture, in principle, by
default, the initial value is 1 mx 1 m. When you import a personal texture, giv
e the actual size (height and length), the texture once stuck in the representat
ion of the CAD window, you can paste, rotate, scale, etc. TREE OF OUTPUTS. Outpu
ts the tree only appears when you have made the calculation of lighting. 15
Outputs Tree opens when you click on the name of the project you are working. Th
is tree is divided between: Home project. Which provides information on the na
me the name of the project and several data as, contacts, number of commission,
company, customer number, date and editor of the project. Index project, with it
s different sections paginated. Parts of the fixtures. The fittings used to be b
roken down into the sections: