Escolar Documentos
Profissional Documentos
Cultura Documentos
CL calculation
Q=0.5*rho*Vstall
q=1885.2864 N/m2
Now, the CLmax that we just calculated is the required value for
CLmax. Let us calculate the value of CLmax available from the airfoil
that we selected in previous sections of the report.
Our selected airfoil was BOEING 737 AIL
We calculated the value of Clmax and alphamax from the Cl vs alpha
curve.
Clmax = 1.5
alphamax = 15 degree(assumed)
for the calculation of Clmax for wing, we first need to calculate the
value of e(Ostwald efficiency factor) using the following
formulae:
AR=9
For tan tmax we use the following formulae:
1
1+
4 n
AR tan n= AR tan
Now,
= 0.33(from reference aircraft)
o= 26.37 degree(from reference aircraft)
n where n is 50%(0.5) for high speed airfoil
tmax = n where n is 50% for high speed airfoil
So,
n = tmax = 21.03 degree
And, e = 0.7023
Now we calculate available CLmax of the wing using the airfoil data by this
formulae:
By the above information, we can tell that for our wing SLOTTED FLAP can
be used since it increases the coefficient of lift by a factor of 1.65.