Escolar Documentos
Profissional Documentos
Cultura Documentos
ALB15.03
Inner O
Dimensions 94.5x77x15
40
RWD (mm) >50
Weight 120g
IP rating IP50
Mounting holes (x2)M4`5
Modifiers2
Accessories3
iBlueDrive accessories3
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (3) Accessories are not-included. More information in accessories section.
respectively. (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
(2) Angles of emission of ALB series ringlights. If not indicated, default angle will be /AM. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
Please, consult the code to select a different angle of emission before ordering (additional please, consult product label when purchasing.
annex Z2.1).
(6) Values of maximum instantaneous consumption of Type i lighting systems in
Powered mode [Strobe mode / Continuous mode]
ALB15.02
ALB SERIES
(x4) FILTER 33
MOUNT POINTS
60.5
54 68
77
40
(2x) M3x0.5 5
11.4 4.5
POWER
CONNECTOR
60
STATUS LED
ALB0804A-E01B
630/AN
3cm 80.0 - 100% LUX vs LWD 630/AM
30000
630/AW
25000 W00/AN
60.0 - 80.0% W00/AM
20000 W00/AW
LUX
15000
40.0 - 60.0%
10000
5000
20.0 - 40.0%
0
50 100 150 200 250 300 350 400 450
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of ALB captured image Brightness distribution of ALB0804A-630i/AM@100mm ALB0804A-630i light intensity.
ZXA15.02
u Table Z1.1 - Environmental Specifications u Table Z1.3 - iBlueDrive control input wiring
All iBlueDrive products come together with a quick-start guide for connection
and working conditions. Refer to iBlueDrive Manual for extended information.
Max. Operating Humidity 85% non-condensing
Operating Temperature 0 - 40C
NPN wiring for strobe or ON/OFF mode
Storage Temperature 0 - 60C
Housing material Anodized aluminium OUT Device
1 = ON NPN OUTPUT
Standards CONTROL (GN) COM 0 = OFF (sinking)
BU
0V
RD
LIGHT 24VDC
BU
0V
[4V...24V] RD
LIGHT 24VDC
OFF ON Vcontrol
[0V...2,1V]
TTL wiring for strobe or ON/OFF mode
100%
Light Output OUT Device
25% 0 = ON TPL OUTPUT
1 = OFF
0% CONTROL (GN)
0 120 500 BU
0V
RD
Time delay of light output (S) LIGHT 24VDC
CONTROL (GN)
OUT Device
1 = ON NPN OUTPUT BU
0V
CONTROL (GN) COM 0 = OFF (sinking)
RD
LED LIGHT 24VDC
BU
LIGHTING 0V
SYSTEM RD
24VDC
10 Kohms
94
ADDITIONAL INFORMATION
ANNEX
ZXA15.02
OUT
iBlueDrive inline is the driver for iBlueDrive
Device
1 = ON NPN OUTPUT technology integrated as a box of 65x33mm
CONTROL (GN) COM 0 = OFF (sinking) to the cable that goes from the lighting
LED system to the connector. It is used when
BU
LIGHTING 0V iBlueDrive driver can not be integrated on
SYSTEM RD chassis. See diagram:
24VDC
Electrical specifications
0V to +6.8V Light ON A 11.5
x2 O4
(CONTROL) 60
Delay from OFF to ON state <5 s 33
Detail A TO THE
Delay from ON to OFF state <5 s LIGHTING
7.9V PIN 2
(0V)
Input impedance 7K9 ? R5
PIN 1
(+24VDC) 500 65 150
Input PNP
8
7 OFF ON
6
Icontrol (mA)
5
4
3
2
1
0
0 5 10 15 20 25 30
Vcontrol (Volts)
OUT Device
1 = ON PNP OUTPUT
CONTROL (GN) COM 0 = OFF (sourcing)
LED
BU
LIGHTING 0V
SYSTEM RD
24VDC
Electrical specifications
0V to +6.8V Light OFF
+7.2V to +24V Light ON
Working conditions 25C, VIN = 24V
Connection Direct to a PNP output
Delay from OFF to ON state <5 s
Delay from ON to OFF state <5 s
Bias voltage in control input 0V
Input impedance 4K ?
Compliance IEC1131-2 Type 1, 2 and 3
ZXA15.02
X
Collimater filter on x axis VCFx
Cloudy day lighting effect
Y Collimater filter on y axis VCFy
u Table Z2.3 - iBlueDrive Accessories legend u Table Z2.7 - Types of light legend
Ultra-diffuse light
96