Escolar Documentos
Profissional Documentos
Cultura Documentos
CHAPTER # 1
2
INTRODUCTION
1.1 CERAMICS
The word ceramic is derived from the Greek word (keramikos)
meaning of pottery or for pottery. So, ceramic can be defined as an inorganic
nonmetallic solid prepared by the action of heat and subsequent cooling. Ceramic
materials may be crystalline, partially crystalline or amorphous material (Bello, 2003).
Elements of metals and non-metals as shown in Table 1.1 can be combined to form an
enormous range of ceramic materials.
In the old age human made ceramics uncovered by archeologist about 24000 BC.
These are found in the form of animal and human shapes, slabs and balls. First use of
ceramic was as pottery vessels is about 9000 BC. While second use was glazed and fired
to produce colored and smooth surfaces. About 1500 BC the glass was produced as a
separate item of ceramic and is closely related to the manufacturing of pottery vessels
(Richerson, 2000).
1.3 TYPES OF CERAMICS
Ceramic materials are grouped into different types according to their properties.
These properties of some ceramic compounds are discussed below. Classification scheme
of ceramics is given in Figure 1.1.
1.3.1 Alumina
Its chemical formula is Al2O3 and is called as Aluminum Oxide (Skinner et al.,
2013). It shows some distinct properties which are wear resistance, corrosion resistance
and strength (Kyocera, USA).
1.3.2 Silicon Nitride
Its chemical formula is Si3N4 (Mellor, 1947). Distinct properties are thermal
shock resistance, low density, high strength, low thermal expansion and good corrosion
resistance (Kyocera, USA).
1.3.3 Silicon Carbide
3
Its chemical formula is SiC and is also known as Carborundum (Weimer, 1997).
It has high corrosion resistance and show high strength at about 1400 (Kyocera,
USA).
Table 1.1 Periodic table with ceramics compounds indicated by a combination of one or more
metallic elements (in green color) with one or more nonmetallic elements (in blue color) (Altinoz
et al., 2009).
4
CERAMICS
Non-Oxide Ceramics
Oxides of Ceramics SiC, Si3N4, BN, B4C
Al2O3, MgO, Be2O3
Family of Oxides
3CaO.Al2O3
CaO.Al2O3 12CaO.7Al2O3
Aluminate Family
CaO.6Al2O3 CaO.2Al2O3
5
1.3.4 Zirconia
Chemical formula of Zirconia is ZrO 2 (Nielsen et al., 2005). It has high strength
and toughness at room temperature and fine grains give smooth surface and Sharpe edges
(Kyocera, USA).
1.3.5 Calcium Oxide
6
1.6 CHARACTERISTICS
Calcium Aluminate cement has a lot of characteristics in which some are given
below,
Rapid strength development at low temperature.
High chemical resistance.
Strength is maintained at high temperature.
Controlled expansion (Washingtonr, 1970).
It has cubic crystalline structure. It has smallest valance band width (VBW) 3.5
eV. It has lowest band gape E g 3.86 eV. It is also seem that non uniform distribution
comparable to pure alumina 2327 . It also has the largest valance band width
(VBW) 7.8 eV. It has hexagonal type crystal structure and has higher crystal symmetry
and provides larger overlap between the orbitals of neighboring atoms. It has largest
band gape E g 5.38 eV. Anisotropic value for (CA6) is large enough while the value of
hole effective mass is small. It is also seem that non uniform distribution of carrier
donors like as oxygen defects or aliovalent substitutional dopants occur by doping of this
structurally anisotropic material (Medvedeva et al., 2007).
1.7.5 12CaO.7Al2O3 (C12A7)
It has cubic crystalline structure. It has lowest melting point 1722 among
five lime alumina compounds. This material show opto-electronic property. Its
conductivity is about 1700 S/cm due to the presence of oxygen ions in cages of diameter
5.6 . Introduction of other ions like H , OH , Cl and F or reduction
CaO.Al2O3
or
CA
Figure 1.1 Phase diagram of calcium aluminates before hydration present in the
anhydrous calcium aluminate cement.
10
2
a three dimensional lattice framework containing 12 cages and two O ions
containing extra framework species occupying some cages. They are more loosely bound
than framework ones, so they are act as free ions. Different monovalent anions can be
replaced by these species but H and O ions gives novel properties to the
material such as oxidation power and persistent light induced electronic conduction
respectively. It was also reported that by replacing the free oxygen ions with electrons
the material will converted into n- type material using chemical reaction with Ca and Ti
metals.
When the concentration of free oxygen ions (replaced by electrons at room
temperature) is increased to 2 1021 cm3 then the conductivity changes from 10 -10
Scm-1 to1.5 103 Scm-1 and the critical concentration for metal-insulator transfer is about
1x1021 cm-3. As the temperature of C12A7.e- drops the resistivity of the material also
drops and it will show superconducting property at T c 0.14-0.4 K depending upon
concentration of free electron anions (McLeod et al., 2012).
Figure 1.2 Conduction setting in. Modals of solvated electrons in (A) Alkali metal
Ammonia Solution (B) C12A7.e- melt (C) C12A7.e- glass (Edwards, 2011).
12
temperature chemical reduction with Titanium. These introduced electrons are trapped at
+
oxygen ion vacancy in the melt with the cage structure is so called F like center.
The transparent and insulator oxide is transferred into a highly colored and
electron doped conducting liquid. These solvated electrons survive and indeed thrive at
high temperature up to 1873 K. Solvated electrons in the cages of mayenite results
partially filled conduction band. As the concentration of solvated electrons increases
above to a critical concentration turning liquid cement into a liquid metal.
The rapid quenching of the high temperature melt leads to C12A7.e- glassy
materials but the high majority exist as a diamagnetic spin paired state. Carefully study
show that glass transition temperature for highly conducting C12A7.e - electride melt is
160 K lower than that for the parent C12A7 glass. Thats why; the network structure of
13
the electride glass is fundamentally different from that of the parent cement glass (Kim et
al., 2011).
REFERENCES
1 Altaf Hussain, Sitaram Aryal, Paul Rulis, M. Arshad Choudhary, and W.Y. Ching,
(2008) Density functional calculations of the electronic structure and optical
properties of the ternary carbides Al4SiC4 and Al4Si2C5 Physical Review B 78,
195102.
2 ALTINZ Duygu., Emine ZTA, Melodi HASUHADAR, Merve AY,
(2009) Ceramics Hacettepe University. KMU.
4 Altaf Hussain, Sitaram Aryal, Paul Rulis, M. Arshad Choudhary, Jun Chen, and
W. Y. Ching, (2011) Ab initio electronic structure calculations and optical
properties of ordered and disordered Ni3Al Journal of Alloys and Compounds
509.
5 Akola Jaakko., S. Kohara, K. Ohara, A. Fujiwara, Y. Watanabe, A. Masuno, T.
Usuki, T. Kubo, A. Nakahira, K. Nitta, T. Uruga, J. K. R. Weber, C. J. Benmore,
(2013) Network Topology and Formation of Solvated Electrons in Binary CaO-
Al2O3 Composition Glasses Early Edition, Proc. Natl. Acad. Sci. U.S.A.
6 Blmer Nits, (2002) Mott-Hubbard Metal-Insulator Transition and Optical
Conductivity in High Dimensions Dissertation Doctor of Philosophy,
Universitt Augsburg.
7 Bello F. B., (2003) Ceramic techniques for Post-primary Institutions in Kaduna
state M.A Thesis, Department of Industrial Design, ABU Zaria. Pp. 30, 66,
73.
8 Ching W. Y., and Paul Rulis, (2012) Electronic Structure Methods for Complex
Materials, Edition 1st, Oxford University Press.
9 Dresselhaus M. S., (2011). Solid State Physics (Part II): Optical Properties of
Solids URL. http://web.mit.edu/course/6/6.732/www/6.732-pt2.pdf.
10 Edwards Peter P., (2011) Electrons in Cements, Science B 333.
11 Hohenberg P., and W. Kohn, (1964) Inhomogeneous electron gas, Phys. Rev.
136 (3B), 864.
12 Hewlett Peter., (2006) Lea's Chemistry of Cement and Concrete Edition 4th,
ELSEVIER Jordan Hill UK.
13 Hussein M. N. Assadi, and Dorian A. H. Hanaor, (2013) Theoretical study on
copper's energetics and magnetism in TiO 2 polymorphs, Journal of Applied
Physics 113 [23] 233913.
14 Koch W., and M.C. Holthausen, (2001) A Chemists Guide to Density
Functional Theory Wiley, VCH.
15 Kim Sung Wing., Terumasa Shimoyama, and Hideo Hosono, (2011) Solvated
electrons in high temperature melt and glasses of the room temperature stable
electride [Ca24Al28O64]4+.4e-, Science B 333.
16 Kyocera, USA, http://americas.kyocera.com/kicc/industrial/types.html
17 Li Zhenyu, Julong Yang, J.G. Hou, and Qingshi Zhu, (2004) Is Maynite without
clathered oxygen is an Inorganic Electride, Willey-VCH KGaA, Welnheim.
15
25 Parr R.G., and W. Yang, (1989) Density Functional Theory of Atoms and
Molecules Oxford University Press, New York.
26 Richerson David W., (2000) The Magic of ceramic, Wiley.
27 Rulis Paul., (2005) Computational studies of bioceramic crystals and related
materials University of Missouri, Kansas City.
28 Rollett Prof. A.D., (2007) Microstructure properties 1 Lecture 4B: Anisotropic
elasticity E-Print Network. 27-301.
29 Roylance David., (2008) Mechanical properties of materials MIT.
1. Skinner Lawrie B., Adrian C. Barnes, Philip S. Salmon, Louis Hennet, Henry E.
Fischer, Chris J. Benmore, Shinji Kohara, J. K. Richard Weber, Aleksei
Bytchkov, Martin C. Wilding, John B. Parise, Thomas O. Farmer, Irina
Pozdnyakova, Sonia K. Tumber, and Koji Ohara, (2013) Joint diffraction and
modeling approach to the structure of liquid alumina Phys. Rev. B 87, 024201.
2. Sushko Peter V., Alexander L. Shluger, Yoshitake Toda, Masahiro Hirano, and
Hideo Hosono, (2013) Models of stoichiometric and oxygen-deficient surfaces
of subnano-porous 12CaO.7Al2O3 THE ROYAL SOCIETY.
16