Escolar Documentos
Profissional Documentos
Cultura Documentos
This is to certify that the undersigned did at the request of the above mentioned client, attended on 17 March
2015 to 17 February 2016 to carry out the scope of services described below.
2.0 Details:
Third party Inspection for manufacturing of Weld Overlayed Pipes and Pup Pieces with UNS 06625,
Weld Overlayed of Bend Mother Pipes With UNS N06625 was conducted at the PT. Cladtek Bi Metal
Manufacturing Jl. Tenggiri Batu Ampar, Batam Indonesia. The activities detailed below :
a. Witnessed actual Carbon Steel backing pipe materials for CT-293 Project. Found eight (8) pipes
consist of 8 pipes API 5L-X65Q PSL 2, 15.1 mm Wall Thickness with Inspection Certificate EN
10204 3.1 / ISO 10474 3.1.B were available at PT. Cladtek shop and supplied by Tenaris.
b. Witnessed actual Carbon Steel backing pipe materials for CT-293 Project. Found twelve (12) pipes
consist of 8 pipes API 5L-X65Q PSL 2, 22.2 mm Wall Thickness with Inspection Certificate EN
10204 3.1 / ISO 10474 3.1.B were available at PT. Cladtek shop and supplied by Tenaris.
c. Witnessed actual Carbon Steel backing pipe materials for CT-293 Project. Found twenty (20) pipes
consist of 14 pipes API 5L Steel Grade L450 Q/X65Q + Requests as per spec TD. 006 PSL 2, 31.8
mm Wall Thickness with Inspection Certificate EN 10204 3.1 / ISO 10474 3.1.B, the pipes ID.
machined to 28.6 mm Wall Thickness were available at PT. Cladtek shop and supplied by Tenaris.
d. Witnessed actual material for Nickel Alloy Wire UNS 06625. Found PT. Raajratna Wire consumable
with AWS A5.14/ASME SFA 5.14 grade ERNiCrMo-3. The UNS 06625 consumable wire were
available at PT. Cladtek Shop and supplied with Material Test Certificate EN 10204-3.1.
e. Reviewed project documents:
Subsea Structures Clad Pipe Specification, Technip Doc. Number 63785-000-SP-5231-007
ENI Doc. Number 220802DUST00110.
Subsea Structures Piping Material Specification, Technip Doc. Number 63875-000-SP-5103-
004, ENI Doc. Number 220802DUST03005.
CT-293-MIS-001 Rev. 2 Manufacturing and Inspection Specification for Weld Overlayed of
Pipes and Pup Pieces with UNS N06625.
CT-293-MIS-002 Rev. 1 Manufacturing and Inspection Specification for Weld Overlayed of
Bend Mother Pipes with UNS N06625.
These four (4) documents were available for guidance during Manufacturing Weld Overlayed of
Pipes, Pup Pieces and Bend Mother Pipes with UNS N06625.
f. Witnessed manufacturing weld overlayed 8 and 14 pipes with UNS N06625 in accordance with
requirements of documents mentioned in item 2.0 e and the results were found satisfactory. The
detail of acceptable and satisfactory weld overlayed 8 and 14 Pipes, Pup Pieces, Mother Bend
Pipes detailed in item 3.0 Identification of Item(s) verified.
g. Reviewed nine (9) Non Conformance Reports and one (1) Method Statement Doc No. CT-293-SOP-
001 Rev. 3 found during manufacturing Weld Overlayed of Pipes, Pup Pieces and Bend Mother Pipes
with UNS N06625. Found all nine (9) Non Conformance Reports and one (1) Method Statement had
been closed and approved by the Clients.
3 CT-293-1-1C NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 499
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
4 CT-293-1-1D NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 495
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
5 CT-293-1-1E NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 497
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
6 CT-293-1-1F NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 500
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
7 CT-293-1-1G NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 498
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
8 CT-293-1-1H NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 498
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
9 CT-293-1-1I NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 499
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
10 CT-293-1-1J NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 498
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
11 CT-293-1-1K NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 499
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
12 CT-293-1-1L NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 497
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
13 CT-293-1-1M NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 498
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
14 CT-293-1-1N NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 500
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
This Report is granted subject to the condition that it is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, express or implied and the liability of ABSG Consulting Inc. (hereinafter referred to as ABS Consulting) shall be limited to the
acts or omissions of its employees, agents or subcontractors. Under no circumstances whatsoever shall ABS Consulting be liable for any injury or damage to any person or
property occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than such defects ascertainable by normally
accepted testing standards and only upon those items actually inspected by ABS Consulting and which are covered by this Report.
Page 4 of 15
Report no. Project no. Report date: Office:
16-32287-SG 3353829 22 February 2016 Singapore
15 CT-293-1-1O NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 500
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
16 CT-293-1-1P NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 500
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
17 CT-293-1-1Q NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 495
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
18 CT-293-1-1R NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 499
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
19 CT-293-1-1S NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 500
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
20 CT-293-1-2A NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 497
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
21 CT-293-1-2B NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 500
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
22 CT-293-1-2C NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 497
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
23 CT-293-1-2D NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 499
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
24 CT-293-1-2E NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 496
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
25 CT-293-1-2F NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 500
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
26 CT-293-1-2G NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 500
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
This Report is granted subject to the condition that it is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, express or implied and the liability of ABSG Consulting Inc. (hereinafter referred to as ABS Consulting) shall be limited to the
acts or omissions of its employees, agents or subcontractors. Under no circumstances whatsoever shall ABS Consulting be liable for any injury or damage to any person or
property occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than such defects ascertainable by normally
accepted testing standards and only upon those items actually inspected by ABS Consulting and which are covered by this Report.
Page 5 of 15
Report no. Project no. Report date: Office:
16-32287-SG 3353829 22 February 2016 Singapore
27 CT-293-1-2H NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967 IRN 006
PSL2 with min. 3.5 mm thickness weld 01/13/11309 500
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 1.
28 CT-293-1-2I NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 005
PSL2 with min. 3.5 mm thickness weld 01/13/11309 535
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
29 CT-293-1-2J NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 005
PSL2 with min. 3.5 mm thickness weld 01/13/11309 540
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
30 CT-293-1-2K NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 005
PSL2 with min. 3.5 mm thickness weld 01/13/11309 532
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
31 CT-293-1-2L NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 005
PSL2 with min. 3.5 mm thickness weld 01/13/11309 522
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
32 CT-293-1-2M NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 005
PSL2 with min. 3.5 mm thickness weld 01/13/11309 542
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
33 CT-293-1-2N NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 004
PSL2 with min. 3.5 mm thickness weld 01/13/11309 1,542
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
34 CT-293-1-2O NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 004
PSL2 with min. 3.5 mm thickness weld 01/13/11309 1,540
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
35 CT-293-1-3A NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 004
PSL2 with min. 3.5 mm thickness weld 01/13/11309 1,549
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
36 CT-293-1-3B NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 004
PSL2 with min. 3.5 mm thickness weld 01/13/11309 1,540
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
37 CT-293-1-3C NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 008
PSL2 with min. 3.5 mm thickness weld 01/13/11309 2,539
overlay UNS N06625 for FLET Straight
Pipe
38 CT-293-1-3D NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 008
PSL2 with min. 3.5 mm thickness weld 01/13/11309 2,543
overlay UNS N06625 for FLET Straight
Pipe
This Report is granted subject to the condition that it is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, express or implied and the liability of ABSG Consulting Inc. (hereinafter referred to as ABS Consulting) shall be limited to the
acts or omissions of its employees, agents or subcontractors. Under no circumstances whatsoever shall ABS Consulting be liable for any injury or damage to any person or
property occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than such defects ascertainable by normally
accepted testing standards and only upon those items actually inspected by ABS Consulting and which are covered by this Report.
Page 6 of 15
Report no. Project no. Report date: Office:
16-32287-SG 3353829 22 February 2016 Singapore
39 CT-293-1-3E NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 008
PSL2 with min. 3.5 mm thickness weld 01/13/11309 2,533
overlay UNS N06625 for FLET Straight
Pipe
40 CT-293-1-4A NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967, IRN 007
PSL2 with min. 3.5 mm thickness weld QS034
overlay UNS N06625 for FLET Welding 01/13/11309 345
Test Ring
41 CT-293-1-4B NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 001
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for FLET Welding 01/13/11309 346.5
Test Ring
42 CT-293-1-4C NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 007
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for FLET Welding 01/13/11309 330
Test Ring
43 CT-293-1-4D NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967 IRN 007
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for FLET Welding 01/13/11309 348
Test Ring
44 CT-293-1-4E NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967 IRN 007
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for FLET Welding 01/13/11309 349
Test Ring
45 CT-293-1-4F NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967 IRN 009
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for FLET Welding 01/13/11309 346
Test Ring
46 CT-293-1-4G NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 009
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for FLET Welding 01/13/11309 348
Test Ring
47 CT-293-1-4H NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967, IRN 009
PSL2 with min. 3.5 mm thickness weld QS034
overlay UNS N06625 for FLET Welding 01/13/11309 347
Test Ring
48 CT-293-1-4I NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967, IRN 009
PSL2 with min. 3.5 mm thickness weld QS034
overlay UNS N06625 for FLET Welding 01/13/11309 348.7
Test Ring
49 CT-293-1-4J NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR967, QS034 IRN 009
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for FLET Welding 01/13/11309 349
Test Ring
50 CT-293-1-4K NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 009
PSL2 with min. 3.5 mm thickness weld
This Report is granted subject to the condition that it is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, express or implied and the liability of ABSG Consulting Inc. (hereinafter referred to as ABS Consulting) shall be limited to the
acts or omissions of its employees, agents or subcontractors. Under no circumstances whatsoever shall ABS Consulting be liable for any injury or damage to any person or
property occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than such defects ascertainable by normally
accepted testing standards and only upon those items actually inspected by ABS Consulting and which are covered by this Report.
Page 7 of 15
Report no. Project no. Report date: Office:
16-32287-SG 3353829 22 February 2016 Singapore
62 CT-293-1-4W NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 009
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for FLET Welding 01/13/11309 349
Test Ring
63 CT-293-1-4X NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 009
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for FLET Welding 01/13/11309 348
Test Ring
54 CT-293-1-5A NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 009
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for FLET Welding 01/13/11309 2,563
Test Ring
65 CT-293-1-5B NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 009
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for FLET Welding 01/13/11309 2,547
Test Ring
66 CT-293-1-5C NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 009
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for FLET Welding 01/13/11309 2,544
Test Ring
67 CT-293-1-2N NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 004
PSL2 with min. 3.5 mm thickness weld 01/13/11309 1,542
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
68 CT-293-1-2O NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 004
PSL2 with min. 3.5 mm thickness weld 01/13/11309 1,540
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
69 CT-293-1-3A NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 004
PSL2 with min. 3.5 mm thickness weld 01/13/11309 1,549
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
70 CT-293-1-3B NPS 8 x 15.1 mm WT, API 5L-X65Q- 933965 QR 967 IRN 004
PSL2 with min. 3.5 mm thickness weld 01/13/11309 1,540
overlay UNS N06625 for FLET Inboard
Hub Connector Pup Piece Type 2
71 CT-293-1-5D NPS 8 x 15.09 mm WT, API 5L-X65Q- 933965 QR 967 IRN 015
PSL2 with min. 3.7 mm thickness weld 01/13/11309 N/A
overlay UNS N06625 for FLET Pipe Bend
(3D)
72 CT-293-1-6A NPS 8 x 15.09 mm WT, API 5L-X65Q- 933965 QR 967 IRN 015
PSL2 with min. 3.7 mm thickness weld 01/13/11309 N/A
overlay UNS N06625 for FLET Pipe Bend
(3D)
73 CT-293-1-6B NPS 8 x 15.09 mm WT, API 5L-X65Q- 933965 QR 967 IRN 015
PSL2 with min. 3.7 mm thickness weld 01/13/11309 N/A
overlay UNS N06625 for FLET Pipe Bend
This Report is granted subject to the condition that it is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, express or implied and the liability of ABSG Consulting Inc. (hereinafter referred to as ABS Consulting) shall be limited to the
acts or omissions of its employees, agents or subcontractors. Under no circumstances whatsoever shall ABS Consulting be liable for any injury or damage to any person or
property occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than such defects ascertainable by normally
accepted testing standards and only upon those items actually inspected by ABS Consulting and which are covered by this Report.
Page 9 of 15
Report no. Project no. Report date: Office:
16-32287-SG 3353829 22 February 2016 Singapore
(3D)
74 CT-293-1-6C NPS 8 x 15.09 mm WT, API 5L-X65Q- 933965 QR 967 IRN 015
PSL2 with min. 3.7 mm thickness weld 01/13/11309 N/A
overlay UNS N06625 for FLET Pipe Bend
(3D)
75 CT-293-1-6D NPS 8 x 15.09 mm WT, API 5L-X65Q- 933965 QR 967 IRN 015
PSL2 with min. 3.7 mm thickness weld 01/13/11309 N/A
overlay UNS N06625 for FLET Pipe Bend
(3D)
76 CT-293-2-12A NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 010
PSL2 with min. 3.5 mm thickness weld 01/12/13713 347.8
overlay UNS N06625 for Gooseneck
Welding Test Ring
77 CT-293-2-12B NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 010
PSL2 with min. 3.5 mm thickness weld 01/12/13713 337
overlay UNS N06625 for Gooseneck
Welding Test Ring
78 CT-293-2-12C NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 010
PSL2 with min. 3.5 mm thickness weld 01/12/13713 347
overlay UNS N06625 for Gooseneck
Welding Test Ring
79 CT-293-2-12D NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 010
PSL2 with min. 3.5 mm thickness weld 01/12/13713 344.3
overlay UNS N06625 for Gooseneck
Welding Test Ring
80 CT-293-2-12E NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 002
PSL2 with min. 3.5 mm thickness weld 01/12/13713 337.0
overlay UNS N06625 for Gooseneck
Welding Test Ring
81 CT-293-2-12F NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 010
PSL2 with min. 3.5 mm thickness weld 01/12/13713 348.3
overlay UNS N06625 for Gooseneck
Welding Test Ring
82 CT-293-2-12G NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 010
PSL2 with min. 3.5 mm thickness weld 01/12/13713 348
overlay UNS N06625 for Gooseneck
Welding Test Ring
83 CT-293-2-12H NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 002
PSL2 with min. 3.5 mm thickness weld 01/12/13713 346
overlay UNS N06625 for Gooseneck
Welding Test Ring
84 CT-293-2-12I NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 010
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for Gooseneck 01/12/13713 346
Welding Test Ring
85 CT-293-2-12J NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 010
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for Gooseneck 01/12/13713 348
Welding Test Ring
This Report is granted subject to the condition that it is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, express or implied and the liability of ABSG Consulting Inc. (hereinafter referred to as ABS Consulting) shall be limited to the
acts or omissions of its employees, agents or subcontractors. Under no circumstances whatsoever shall ABS Consulting be liable for any injury or damage to any person or
property occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than such defects ascertainable by normally
accepted testing standards and only upon those items actually inspected by ABS Consulting and which are covered by this Report.
Page 10 of 15
Report no. Project no. Report date: Office:
16-32287-SG 3353829 22 February 2016 Singapore
86 CT-293-2-12K NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 010
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for Gooseneck 01/12/13713 349
Welding Test Ring
87 CT-293-2-12L NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 010
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for Gooseneck 01/12/13713 348.2
Welding Test Ring
88 CT-293-2-1A NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 017
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
89 CT-293-2-1B NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 014
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
90 CT-293-2-1C NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 023
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
91 CT-293-2-1D NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 018
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
92 CT-293-2-2A NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 023
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
93 CT-293-2-2C NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 017
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
94 CT-293-2-2D NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 024
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
95 CT-293-2-3A NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 017
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
96 CT-293-2-3B NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 018
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
97 CT-293-2-3C NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 023
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
This Report is granted subject to the condition that it is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, express or implied and the liability of ABSG Consulting Inc. (hereinafter referred to as ABS Consulting) shall be limited to the
acts or omissions of its employees, agents or subcontractors. Under no circumstances whatsoever shall ABS Consulting be liable for any injury or damage to any person or
property occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than such defects ascertainable by normally
accepted testing standards and only upon those items actually inspected by ABS Consulting and which are covered by this Report.
Page 11 of 15
Report no. Project no. Report date: Office:
16-32287-SG 3353829 22 February 2016 Singapore
98 CT-293-2-3D NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 018
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
99 CT-293-2-4A NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 024
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
100 CT-293-2-4B NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 014
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
101 CT-293-2-4C NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967, IRN 023
PSL2 with min. 3.7 mm thickness weld QS034
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
102 CT-293-2-4D NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 024
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
103 CT-293-2-5A NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967, IRN 024
PSL2 with min. 3.7 mm thickness weld QS034
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
104 CT-293-2-5B NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 023
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
105 CT-293-2-5C NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 023
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
106 CT-293-2-5D NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 023
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
107 CT-293-2-6A NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 018
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
108 CT-293-2-6B NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 018
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
109 CT-293-2-6C NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 024
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
This Report is granted subject to the condition that it is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, express or implied and the liability of ABSG Consulting Inc. (hereinafter referred to as ABS Consulting) shall be limited to the
acts or omissions of its employees, agents or subcontractors. Under no circumstances whatsoever shall ABS Consulting be liable for any injury or damage to any person or
property occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than such defects ascertainable by normally
accepted testing standards and only upon those items actually inspected by ABS Consulting and which are covered by this Report.
Page 12 of 15
Report no. Project no. Report date: Office:
16-32287-SG 3353829 22 February 2016 Singapore
110 CT-293-2-6D NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 023
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
111 CT-293-2-7D NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 025
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
112 CT-293-2-10A NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 017
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
113 CT-293-2-10B NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 014
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
114 CT-293-2-10C NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967, IRN 014
PSL2 with min. 3.7 mm thickness weld QS034
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
115 CT-293-2-10D NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 018
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
116 CT-293-2-11A NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 014
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
117 CT-293-2-11B NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 014
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
118 CT-293-2-11C NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 023
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
119 CT-293-2-11D NPS 8 x 22.2 mm WT, API 5L-X65Q- 924346 QR 967 IRN 014
PSL2 with min. 3.7 mm thickness weld
overlay UNS N06625 for Gooseneck Pipe 01/12/13713 N/A
Bend (3D)
120 CT-293-3-1B2 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 012
PSL2 with min. 3.5 mm thickness weld 01/14/08499 349
overlay UNS N06625 for Welding Test
Ring
121 CT-293-3-2A2 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 011
PSL2 with min. 3.5 mm thickness weld 01/14/08499 349.5
overlay UNS N06625 for Welding Test
Ring
This Report is granted subject to the condition that it is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, express or implied and the liability of ABSG Consulting Inc. (hereinafter referred to as ABS Consulting) shall be limited to the
acts or omissions of its employees, agents or subcontractors. Under no circumstances whatsoever shall ABS Consulting be liable for any injury or damage to any person or
property occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than such defects ascertainable by normally
accepted testing standards and only upon those items actually inspected by ABS Consulting and which are covered by this Report.
Page 13 of 15
Report no. Project no. Report date: Office:
16-32287-SG 3353829 22 February 2016 Singapore
122 CT-293-3-3A-2 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 003
PSL2 with min. 3.5 mm thickness weld
overlay UNS N06625 for Welding Test 01/14/08499 348.7
Ring
123 CT-293-3-2B2 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 011
PSL2 with min. 3.5 mm thickness weld 01/14/08499 343
overlay UNS N06625 for Welding Test
Ring
124 CT-293-3-2B3 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 011
PSL2 with min. 3.5 mm thickness weld 01/14/08499 347.7
overlay UNS N06625 for Welding Test
Ring
125 CT-293-3-3B2 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 011
PSL2 with min. 3.5 mm thickness weld 01/14/08499 349
overlay UNS N06625 for Welding Test
Ring
126 CT-293-3-3B3 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 011
PSL2 with min. 3.5 mm thickness weld 01/14/08499 345
overlay UNS N06625 for Welding Test
Ring
127 CT-293-3-4A2 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 011
PSL2 with min. 3.5 mm thickness weld 01/14/08499 349.7
overlay UNS N06625 for Welding Test
Ring
128 CT-293-3-4B-2 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 003
PSL2 with min. 3.5 mm thickness weld 01/14/08499 349.2
overlay UNS N06625 for Welding Test
Ring
129 CT-293-3-4B3 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 011
PSL2 with min. 3.5 mm thickness weld 01/14/08499 336
overlay UNS N06625 for Welding Test
Ring
130 CT-293-3-5A2 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 011
PSL2 with min. 3.5 mm thickness weld 01/14/08499 341,7
overlay UNS N06625 for Welding Test
Ring
131 CT-293-3-5B2 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 011
PSL2 with min. 3.5 mm thickness weld 01/14/08499 337.7
overlay UNS N06625 for Welding Test
Ring
132 CT-293-3-2B1 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 022
PSL2 with min. 3.7 mm thickness weld 01/14/08499 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (3D)
133 CT-293-3-3B1 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 022
PSL2 with min. 3.7 mm thickness weld 01/14/08499 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (3D)
This Report is granted subject to the condition that it is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, express or implied and the liability of ABSG Consulting Inc. (hereinafter referred to as ABS Consulting) shall be limited to the
acts or omissions of its employees, agents or subcontractors. Under no circumstances whatsoever shall ABS Consulting be liable for any injury or damage to any person or
property occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than such defects ascertainable by normally
accepted testing standards and only upon those items actually inspected by ABS Consulting and which are covered by this Report.
Page 14 of 15
Report no. Project no. Report date: Office:
16-32287-SG 3353829 22 February 2016 Singapore
134 CT-293-3-4B1 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 022
PSL2 with min. 3.7 mm thickness weld 01/14/08499 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (3D)
135 CT-293-3-8B NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 026
PSL2 with min. 3.7 mm thickness weld 01/14/08499 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (3D)
136 CT-293-3-3A1 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 013
PSL2 with min. 3.7 mm thickness weld 01/14/08499 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (5D)
137 CT-293-3-4A1 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 019
PSL2 with min. 3.7 mm thickness weld 01/14/08499 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (5D)
138 CT-293-3-5A1 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 013
PSL2 with min. 3.7 mm thickness weld 01/14/08499 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (5D)
138 CT-293-3-5B1 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 016
PSL2 with min. 3.7 mm thickness weld 01/14/08499 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (3D)
140 CT-293-3-6A1 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 021
PSL2 with min. 3.7 mm thickness weld 01/14/08499 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (5D)
141 CT-293-3-7A1 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 020
PSL2 with min. 3.7 mm thickness weld 01/14/08499 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (5D)
142 CT-293-3-8A1 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 013
PSL2 with min. 3.7 mm thickness weld 01/14/08499 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (5D)
143 CT-293-3-9A1 NPS 14 x 28.60 mm WT, API 5L-X65Q- 943649 QR 967 IRN 013
PSL2 with min. 3.7 mm thickness weld 01/14/08499 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (5D)
144 CT-293-3-10A NPS 14 x 28.60 mm WT, API 5L-X65Q- 924688 QR 967 IRN 026
PSL2 with min. 3.7 mm thickness weld 01/2/14401 N/A
overlay UNS N06625 for Gooseneck Pipe
Bend (5D)
This Report is granted subject to the condition that it is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, express or implied and the liability of ABSG Consulting Inc. (hereinafter referred to as ABS Consulting) shall be limited to the
acts or omissions of its employees, agents or subcontractors. Under no circumstances whatsoever shall ABS Consulting be liable for any injury or damage to any person or
property occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than such defects ascertainable by normally
accepted testing standards and only upon those items actually inspected by ABS Consulting and which are covered by this Report.
Page 15 of 15
Report no. Project no. Report date: Office:
16-32287-SG 3353829 22 February 2016 Singapore
4.0 Conclusion:
In Summary, the Cladtek Item No. mentioned on above table were manufactured and inspected following
the requirements of CT-293-MIS-001 Rev. 2 Manufacturing and Inspection Specification for Weld
Overlayed of Pipes and Pup Pieces with UNS N06625 and CT-293-MIS-002 Rev. 1 Manufacturing and
Inspection Specification for Weld Overlayed of Bend Mother Pipes with UNS N06625.
The results of the above inspection and testing were accordance to 3.2 EN10204:2004.
The 3rd party inspection results of the above Cladtek Item No. were found satisfactory.
Etmon Hanofiar
Technical Representative
ABSG Consulting Inc.
This Report is granted subject to the condition that it is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, express or implied and the liability of ABSG Consulting Inc. (hereinafter referred to as ABS Consulting) shall be limited to the
acts or omissions of its employees, agents or subcontractors. Under no circumstances whatsoever shall ABS Consulting be liable for any injury or damage to any person or
property occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than such defects ascertainable by normally
accepted testing standards and only upon those items actually inspected by ABS Consulting and which are covered by this Report.