Escolar Documentos
Profissional Documentos
Cultura Documentos
Atlas Copco wireline drill rods of the highest quality, are manufactured to exacting specifications using advanced machining
technology. Combined with the industrys highest raw material specification standards and subsequent enhancement through
sophisticated heat treatment, Atlas Copco MO wireline rods provide the balance you need to deliver top level economic
performance and a superior productivity advantage at your deep hole drill site every time.
Quality to perform
Deep hole core drilling is disproportio-
nately costlier than for shallow holes.
The cost of quality can have enormous
consequences on the profitability at
a drill site. With this in mind, we are
offering the MO thread, manufactured
to exacting specifications using the
industry's highest quality raw materials
and advanced machining. Atlas Copco
has zero tolerance towards compro-
mising on material and workmanship
quality in the design and manufacture
of its products.
Rated Maximum Depth (m) 1800* 2100 2400* 2700 2700* 3000
Outer Diameter (mm) 88.9 88.9 69.9 69.9 55.6 55.6
Mid Body Inner Diameter (mm) - 80.9 - 61.8 - 47.5
Inner (Tool joint) Diameter (mm) 77.8 77.8 60.3 60.3 46.1 46.1
Rod Weight per kg/3m 34.7 27.4 23.8 20.7 17.9 15.9
Yield strength Min 740 Mpa
Tensile strength Min 880 Mpa
Joint traction to failure 102,033 kgf (NMO)
Joint torque to failure 72,200 kgf/m (NMO)
Factor of safety applied to depth capacities, which are based on straight vertical fluid filled holes.
Third party destructive testing figures conducted on non heat treated drill rods are used for the baseline figures above. Atlas Copco also produce non
heat treated rods when requested. Customers having their personal experiences using the products, particularly with heat treated tool joints, regularly
exceed these ratings. Ensure that accessories, core barrels and other threaded connections properly mate with the selected tubular products.
Atlas Copco internally upset 'CMO' series wireline rods maintain the normal outside diameter over its entire length and standard
wall thickness at the threaded ends where it is required. The inside diameter gradually increases achieving a thinner wall
thickness in the mid-body.
The weight decrease offered by internally upset rod is as much as up to 21% for H, 13-11% for N and B sizes.
The benefits for the end user are primarily that greater depths can be achieved in a nominal diameter. This provides greater
flexibility in rig utilization and core barrel selection when the limitations of depth are determined by machine pull back force.
Lighter drill rods are easier on people and machinery. A thinner mid body design provides a more flexible wireline drill rod when
end users require the same.
120 000
100 000
80 000
Traction Test (lbs/in)
60 000
Torsion Test (lbs/ft)
40 000
20 000
0
Traction (lbs/ft) Torsion (lbs/in)
The tests were conducted to provide a clear illustration of the high performance level of the MO drill rod.
3 000
Drilling depth, vertical down (m)
2 500
2 000
MO Drill Rod
1 500
CMO Drill Rod
1 000
500
0
HMO HCMO NMO NCMO BMO BCMO
Recommended maximum depth (m) using an MO or CMO rod. A factor of safety applies to depth capacities.
These are based on straight verticle and fluid filled holes.
Material and design in harmony
Critical balance
Atlas Copco deep hole MO wireline drill rods provide you with the optimum balance of design and practical features to keep
your operating costs down.
MO rods are for use in all conditions and applications where long service life is expected with trouble free reliability, ease of use
and inherent strength.
Just like with the 3300m field proven NMO thread, all MO drill rod threads provide a high-strength, high-pressure threaded
connection as a minimum.
MO series wireline rods are strong and robust to survive the pressures in repetitive deep drill holes.
Acting as the conduit for the flushing medium, mating MO thread profiles provide a leak proof joint over changing depths with
ease of use and long service life.
The MO thread design is forgiving to the end user and makes it easy to stab, start, make and maintain joint pre-torque, and with
a flat learning curve it is easy to learn to work with.
Occurring at the molecular level on the drill rod pin end, without imparting additional risk of embrittlement, the Atlas Copco anti
galling process completes the MO drill rod.
Critical design
Atlas Copco threads share sound general thread design characteristics. They are coarse,
tapered, require pre-torque to overcome joint stand off and have multiple sealing and
interference surfaces.
The MO thread is a modified buttress designed thread with a positive yet almost
perpendicular pressure flank angle that provides exceptional leak proof sealing and
elevated pull back strength.
The thread form ensures ease in keeping the joint clean, and maintains a consistent pre-
torque requirement with depth.
The MO clearance flank angle is shallow, providing for thread joint durability. Its large
manufacturing radii eases fatigue concentration, and the rods are as such well suited to
higher bend radii found in deep deviated drilling.
The MO thread and related MO adapters have a unique identification groove that will
make identification easy, avoid mixing rods and adapters with others that may look
similar but are incompatible.
These two groove markings on the rod pin will also give an indication of the rod body
wear. In addition, it will make it easier to identify joint location when breaking the
joints.
Wireline drill rods
Length Weight
Description Part number
m kg lbs
Parallel Wall Tubing - Metric system
HMO Drill Rod 3m 34.7 76.4 3760 0134 38
NMO Drill Rod 3m 23.8 52.4 3760 0152 07
BMO Drill Rod 3m 17.9 39.4 3760 0134 25
Internally Upset Wall Tubing
HCMO Drill Rod 3m 27.4 60.4 3760 0134 39
NCMO Drill Rod 3m 20.7 45.6 3760 0126 36
BCMO Drill Rod 3m 15.9 35.1 3760 0134 44
Parallel Wall Tubing - Imperial system
HMO Drill Rod 10ft 35.3 78.0 3760 0132 22
NMO Drill Rod 10ft 24.2 53.5 3760 0103 36
BMO Drill Rod 10ft 18.2 40.3 3760 0134 27
Internally Upset Wall Tubing
HCMO Drill Rod 10ft 27.9 61.6 3760 0047 67
NCMO Drill Rod 10ft 21.1 46.5 3760 0101 32
BCMO Drill Rod 10ft 16.2 35.8 3760 0134 45