Escolar Documentos
Profissional Documentos
Cultura Documentos
accordance with Item 401.1.1 and shall of the size 450 x 450 x 650 mm for
category 1 & 2 and 600 x 600 x 750 mm for category 3.
The road posts and hazard markers used as permanent safety devices shall
conform fully with the requirements of the statutory instruments, current
British standards and chapter four (4) of the Traffic signs manual. The safety
devices shall consist of delineators and detours of verge master, flex
607-6
master, edge master, passing place post, and chevroflex etc. and will be
manufactured from highly durable tough plastic material with standing
vehicular impact. These shall be of High Intensity Grade reflective sheeting
for maximum visibility by both day and night and consequently be resistant
to impact, damage and vandalism.
Holes shall be excavated to the required depth of the bottom of the concrete
foundation as shown on the Drawing.
The posts shall be erected vertically in position inside the formwork of the
foundation block prior to the placing of the concrete and shall be adequately
supported by bracing to prevent movement of the post during the setting
process of the concrete. The posts shall be located at the positions shown
on the Drawings.
The exposed portion of the fastening hardware on the face of the sign shall
be painted with enamels matching the background colour.
All newly erected traffic road signs shall be covered with burlap or other
material until their uncovering is ordered by the Engineer.