Você está na página 1de 2
ulletin ayu/Day ‘CAUTION Failure to remove the terminal nut from the spark plug for C8.3G and C Gas Plus applications with straight harness connector coils wil result in ‘severe misfire causing reduced spark piug ie or possible engine damage. For C8.3G and C Gas Plus with stright hamess connector cols, Remove and discard the terminal nu from the spark plug. CAUTION Do nt remove the terminal ut from the spark plug for C8.9G, C Gas Plus and L Gas Plus applications with angled hamess connector cols. ‘Angled harness connector coils use the terminal nut as a connection point from the spark plug to the angled hamess connector cals. Boots for angled harness connector coils for C8.3G and C Gas Plus ‘applications "MUST BE ORDERED SEPARATELY’. They are“NOT™ ‘part of the plug kit for this application, ‘Mechanical overtightening can damage the spark plug and cylinder head for adapter. ‘CAUTION Proper spark plug torque is required for heat transfer from the spark plug tom cided orapr tor wilted spa fro, ‘Ssconnectod spark pug wires, and possible engine damage. Magnetic Spark Plug Socket, Part Number 3824876 Inspect he cinder head ug cvly fo ei, Clean a auras. NomborS684676 and tveadn hand rake sre ath treads ‘re smooth and the plug isnot cross-threaded. Tighten te sparkplug Torque Valu: 32mm (28 (ub) Engine Family, PlugeN | Kren | inital Gap Specification | Final Setings om inch B556-1s0and swe andes | sess | eoeo029 | 0.33010 0883 | a013 10018 | Do Net Adust Gan 8 Gos Pus 195 HP 3964408 | 4089629 [0330100889 | qors 00010 | Do Net Adust Gap 8596-250 4025295 | aos00es | 0.356100483 | 0014 0.019 | Agust Gop 05080 020%) 8 Gas Plus 200 and 230 HP 4o2szas | 4000066 | 0356100483 | 0.014 100019 | adjust Gap 0.50émn0020in) BLPG Pus 2961400 | aoe0s29 [03000489 | 0013100010 | Oo Not Adjust Gan 836 and G Gas Pus 4o2s205 | a025416 | 0356100483 | 0.014 0.019 | Do Not Aust Gap (C896 and C Gas Pius Extended le aa7aria | a02090« | 0.27810408 | 001110015 | Adjust Gap 0 405mr(0.016in) L106 Automate Transmission 4025705 | a0s008s | 0.355190.488 | oor wo0r0 | Do Not Adust Gan 1106 Manual Transmission 4025205 | 1020085 | 0.386100483 | 0014 w0010 | Aust Gap 0 505m(0.0200) [CNGE (Prime Power) 4025235 | 1050086 | 0.35610 0.485 | a0%4 19 0019 | Aqust Gap 0.S06mm0.0208) 1 Gas Pus Avomate Trenamission garen19 | 4080969 | 0.279% 0406 | 0011100015 | Do Not Adjust Gan 1 Gas Pus Manual Transmission serene | ao29e69 [0.2700 0.206 | 0.011 10016 | adust Gap 0.408men0 0160 punietin 4907649 Initial Chock(013-016-001) CAUTION ‘Spark olug if is largely dependent upon cleantiness of the plugs porcelain. Dir, ol, and fingerprints reduce the seal strength betwoen the ‘spark plug boot and the porcelain causing reduced spark plug life. Do ‘not touch the porcelain area on the spark plug. Use rubbing alcohol and 2 linttree cloth to clean the spark plug porcelain and rubber boot before instaling the spark plugs. ‘CAUTION Do not clean boots an C8.3G, C Gas Plus or L Gas Plus. These boots are pre-greased, NOTE: A convenient option is an alcohol prep pad that does not contain any moisturizers or other cleaners, Compliant alcohol prep pacs are available at many department stores, drugstores, and industrial supply conters, CAUTION ‘Only gap 85.96-230 HP, B Gas Plus-200, 6 Gas Plus-230HP, C8.3GIC Gas Plus Extended Lite, L10G Manual Transmission, and CNGE Prime Power applications or loss of spark plug life will occur. For B5,9G-230 HP, B Gas Plus-200, B Gas Plus-230HP, L10G Manual ‘Transmiasion and CNGE Prime Power, set the electrode gap using an ‘appropriate spark plug gap too! to 0.508 mm [0.020 in}. For CB.AGIC Gas Pius Extended Life spark plugs, set the electrode gap Using an appropriate srk plug gap tool to 0.408 mm (0.016 in} ‘Adjust the gap by bending the ground(side) electrode using the slots on the gap too). Align the center and ground electrodes. The ground électrode should be parallel and centered over the mide of the center electrode. lf the electrodes can not be aligned, discard the plug. CAUTION Damage to the electrodes due to improper use ofa feeler gauge will shorten the life ofthe spark plug. Clean the tool gauges prior to usage. Use a wire spark plug gap-check tool to ensure the spark plug gap is within specification. Ifthe gap is not within specification, the plug Is. defective and should be returned to Cummins Visually check the spark plug. The ground electrode must be parallel to the center electrode and musi be aligned along the centertine of the plug,

Você também pode gostar