Escolar Documentos
Profissional Documentos
Cultura Documentos
1.2 Durability
Exposure classification: severe; in accordance with Hong Kong Code of Practice
for Structural Use of Concrete (2004).
1.4 Foundations
The immediate soil has an allowable bearing capacity of 1000 kPa under service
load conditions.
2. LOADS
2.1 In accordance with Loadings for Design in Hong Kong. Building (Construction)
3. MATERIALS
3.1 In accordance with Hong Kong Code of Practice for Structural Use of Concrete (2014)
3.2 Steel: hot rolled high yield steel for longitudinal reinforcement; hot rolled mild steel for
transverse reinforcement.
3.3 Concrete: C30 (throughout)
4. DESIGN CODE
4.1 In accordance with relevant Hong Kong Code of Practice for Structural Use of Concrete
(2014)
5. DESIGN TASKS
Students must prepare and submit structural design calculations and drawings for:
(1) The slabs of the typical floor (no moment redistribution needs to be considered).
(2) The roof system as two-way slabs without secondary beams.
(3) The continuous beams on the axis A, B, and C of the typical floor (elastic design, no moment
redistribution needs to be considered).
(4) The columns for all three stories for the location where axis B and 3 intersect.
(5) The pad footing for the column at the location where axis B and 3 intersect.
Draft work
DL =
SDL = 2.0kPa / floor
LL = 3.0 kPa
Wall Load = 6kN/m
(Roof Plan)Slab Only Column Loading
(Typical Floor Plan)
Primary Beam
A, B, C Continuous Beam
Secondary Beam
A~B/1~2 Assume 400*500 self load
Column
B3
loading